C++ NPT_CHECK_SEVERE函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NPT_CHECK_SEVERE函数的典型用法代码示例。如果您正苦于以下问题：C++ NPT_CHECK_SEVERE函数的具体用法？C++ NPT_CHECK_SEVERE怎么用？C++ NPT_CHECK_SEVERE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NPT_CHECK_SEVERE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   CUPnPRenderer::OnSetAVTransportURI
+---------------------------------------------------------------------*/
NPT_Result
CUPnPRenderer::OnSetAVTransportURI(PLT_ActionReference& action)
{
    NPT_String uri, meta;
    PLT_Service* service;
    NPT_CHECK_SEVERE(FindServiceByType("urn:schemas-upnp-org:service:AVTransport:1", service));

    NPT_CHECK_SEVERE(action->GetArgumentValue("CurrentURI", uri));
    NPT_CHECK_SEVERE(action->GetArgumentValue("CurrentURIMetaData", meta));

    // if not playing already, just keep around uri & metadata
    // and wait for play command
    if (!g_application.m_pPlayer->IsPlaying() && g_windowManager.GetActiveWindow() != WINDOW_SLIDESHOW) {
        service->SetStateVariable("TransportState", "STOPPED");
        service->SetStateVariable("TransportStatus", "OK");
        service->SetStateVariable("TransportPlaySpeed", "1");
        service->SetStateVariable("AVTransportURI", uri);
        service->SetStateVariable("AVTransportURIMetaData", meta);
        service->SetStateVariable("NextAVTransportURI", "");
        service->SetStateVariable("NextAVTransportURIMetaData", "");

        NPT_CHECK_SEVERE(action->SetArgumentsOutFromStateVariable());
        return NPT_SUCCESS;
    }

    return PlayMedia(uri, meta, action.AsPointer());
}

开发者ID:FLyrfors，项目名称:xbmc，代码行数:30，代码来源:UPnPRenderer.cpp

示例2: NPT_LOG_INFO_2

/*----------------------------------------------------------------------
|   PLT_SsdpAnnounceInterfaceIterator class
+---------------------------------------------------------------------*/
NPT_Result
PLT_SsdpAnnounceInterfaceIterator::operator()(NPT_NetworkInterface*& net_if) const 
{
    // don't use this interface address if it's not broadcast capable
    if (m_Broadcast && !(net_if->GetFlags() & NPT_NETWORK_INTERFACE_FLAG_BROADCAST)) {
        return NPT_FAILURE;
    }

    NPT_List<NPT_NetworkInterfaceAddress>::Iterator niaddr = 
        net_if->GetAddresses().GetFirstItem();
    if (!niaddr) return NPT_FAILURE;

    // Remove disconnected interfaces
    NPT_IpAddress addr = (*niaddr).GetPrimaryAddress();
    if (!addr.ToString().Compare("0.0.0.0")) return NPT_FAILURE;
    
    if (!m_Broadcast && 
        !(net_if->GetFlags() & NPT_NETWORK_INTERFACE_FLAG_MULTICAST) && 
        !(net_if->GetFlags() & NPT_NETWORK_INTERFACE_FLAG_LOOPBACK)) {
        NPT_LOG_INFO_2("Not a valid interface: %s (flags: %d)", 
                       (const char*)addr.ToString(), net_if->GetFlags());
        return NPT_FAILURE;
    }

    NPT_HttpUrl            url;
    NPT_UdpMulticastSocket multicast_socket;
    NPT_UdpSocket          broadcast_socket;
    NPT_UdpSocket*         socket;

    if (m_Broadcast) {
        url = NPT_HttpUrl((*niaddr).GetBroadcastAddress().ToString(), 1900, "*");
        socket = &broadcast_socket;
    } else {
        url = NPT_HttpUrl("239.255.255.250", 1900, "*");    
        NPT_CHECK_SEVERE(multicast_socket.SetInterface(addr));
        socket = &multicast_socket;
        multicast_socket.SetTimeToLive(PLT_Constants::GetInstance().GetAnnounceMulticastTimeToLive());
    }
    
    NPT_HttpRequest req(url, "NOTIFY", NPT_HTTP_PROTOCOL_1_1);
    PLT_HttpHelper::SetHost(req, "239.255.255.250:1900");
    
    // Location header valid only for ssdp:alive or ssdp:update messages
    if (m_Type != PLT_ANNOUNCETYPE_BYEBYE) {
        PLT_UPnPMessageHelper::SetLocation(req, m_Device->GetDescriptionUrl(addr.ToString()));
    }

    NPT_CHECK_SEVERE(m_Device->Announce(req, *socket, m_Type));

#if defined(PLATINUM_UPNP_SPECS_STRICT)
    // delay alive only as we don't want to delay when stopping
    if (m_Type != PLT_ANNOUNCETYPE_BYEBYE) {
        NPT_System::Sleep(NPT_TimeInterval(PLT_DLNA_SSDP_DELAY_GROUP));
    }
    
    NPT_CHECK_SEVERE(m_Device->Announce(req, *socket, m_Type));
#endif

    return NPT_SUCCESS;
}

开发者ID:0xheart0，项目名称:xbmc，代码行数:63，代码来源:PltSsdp.cpp

示例3: NPT_LOG_INFO

/*----------------------------------------------------------------------
|   PLT_UPnP::Start()
+---------------------------------------------------------------------*/
NPT_Result
PLT_UPnP::Start()
{
    NPT_LOG_INFO("Starting UPnP...");

    NPT_AutoLock lock(m_Lock);

    if (m_Started == true) NPT_CHECK_SEVERE(NPT_ERROR_INVALID_STATE);
    
    NPT_List<NPT_IpAddress> ips;
    PLT_UPnPMessageHelper::GetIPAddresses(ips);
    
    /* Create multicast socket and bind on 1900. If other apps didn't
       play nicely by setting the REUSE_ADDR flag, this could fail */
    NPT_UdpMulticastSocket* socket = new NPT_UdpMulticastSocket();
    NPT_CHECK_SEVERE(socket->Bind(NPT_SocketAddress(NPT_IpAddress::Any, 1900), true));
    
    /* Join multicast group for every ip we found */
    NPT_CHECK_SEVERE(ips.ApplyUntil(PLT_SsdpInitMulticastIterator(socket),
                                    NPT_UntilResultNotEquals(NPT_SUCCESS)));

    /* create the ssdp listener */
    m_SsdpListenTask = new PLT_SsdpListenTask(socket);
    NPT_CHECK_SEVERE(m_TaskManager.StartTask(m_SsdpListenTask));

    /* start devices & ctrlpoints */
    // TODO: Starting devices and ctrlpoints could fail?
    m_CtrlPoints.Apply(PLT_UPnP_CtrlPointStartIterator(m_SsdpListenTask));
    m_Devices.Apply(PLT_UPnP_DeviceStartIterator(m_SsdpListenTask));

    m_Started = true;
    return NPT_SUCCESS;
}

开发者ID:CBers，项目名称:MediaBrowser.Plugins，代码行数:36，代码来源:PltUPnP.cpp

示例4: NPT_CHECK_WARNING

/*----------------------------------------------------------------------
|   PLT_SsdpDeviceSearchResponseInterfaceIterator class
+---------------------------------------------------------------------*/
NPT_Result
PLT_SsdpDeviceSearchResponseInterfaceIterator::operator()(NPT_NetworkInterface*& net_if) const 
{
    const NPT_SocketAddress* remote_addr = &m_RemoteAddr;

    NPT_List<NPT_NetworkInterfaceAddress>::Iterator niaddr = 
        net_if->GetAddresses().GetFirstItem();
    if (!niaddr) return NPT_SUCCESS;

    // don't try to bind on port 1900 or connect will fail later
    NPT_UdpSocket socket;
    //socket.Bind(NPT_SocketAddress(NPT_IpAddress::Any, 1900), true);

    // by connecting, the kernel chooses which interface to use to route to the remote
    // this is the IP we should use in our Location URL header
    NPT_CHECK_WARNING(socket.Connect(m_RemoteAddr, 5000));
    NPT_SocketInfo info;
    socket.GetInfo(info);

    // did we successfully connect and found out which interface is used?
    if (info.local_address.GetIpAddress().AsLong()) {
        // check that the interface the kernel chose matches the interface
        // we wanted to send on
        if ((*niaddr).GetPrimaryAddress().AsLong() != info.local_address.GetIpAddress().AsLong()) {
            return NPT_SUCCESS;
        }

        // socket already connected, so we don't need to specify where to go
        remote_addr = NULL;
    }

    NPT_HttpResponse response(200, "OK", NPT_HTTP_PROTOCOL_1_1);
    PLT_UPnPMessageHelper::SetLocation(response, m_Device->GetDescriptionUrl(info.local_address.GetIpAddress().ToString()));
    PLT_UPnPMessageHelper::SetLeaseTime(response, m_Device->GetLeaseTime());
    PLT_UPnPMessageHelper::SetServer(response, PLT_HTTP_DEFAULT_SERVER, false);
    response.GetHeaders().SetHeader("EXT", "");

    // process search response twice to be DLNA compliant
#if defined(PLATINUM_UPNP_SPECS_STRICT)
    {
        //NPT_UdpSocket socket;
        NPT_CHECK_SEVERE(m_Device->SendSsdpSearchResponse(response, socket, m_ST, remote_addr));
    }
    NPT_System::Sleep(NPT_TimeInterval(PLT_DLNA_SSDP_DELAY_GROUP));
#endif
    {
        //NPT_UdpSocket socket;
        NPT_CHECK_SEVERE(m_Device->SendSsdpSearchResponse(response, socket, m_ST, remote_addr));
    }
    
    return NPT_SUCCESS;
}

开发者ID:CBers，项目名称:MediaBrowser.Plugins，代码行数:55，代码来源:PltSsdp.cpp

示例5: SetListenPort

/*----------------------------------------------------------------------
|   PLT_HttpServer::Start
+---------------------------------------------------------------------*/
NPT_Result
PLT_HttpServer::Start()
{
    NPT_Result res = NPT_FAILURE;
    
    // we can't restart an aborted server
    if (m_Aborted) return NPT_ERROR_INVALID_STATE;
    
    // if we're given a port for our http server, try it
    if (m_Port) {
        res = SetListenPort(m_Port, m_ReuseAddress);
        // return right away if failed and not allowed to try again randomly
        if (NPT_FAILED(res) && !m_AllowRandomPortOnBindFailure) {
            NPT_CHECK_SEVERE(res);
        }
    }
    
    // try random port now
    if (!m_Port || NPT_FAILED(res)) {
        int retries = 100;
        do {    
            int random = NPT_System::GetRandomInteger();
            int port = (unsigned short)(1024 + (random % 1024));
            if (NPT_SUCCEEDED(SetListenPort(port, m_ReuseAddress))) {
                break;
            }
        } while (--retries > 0);

        if (retries == 0) NPT_CHECK_SEVERE(NPT_FAILURE);
    }

    // keep track of port server has successfully bound
    m_Port = m_BoundPort;

    // Tell server to try to listen to more incoming sockets
    // (this could fail silently)
    if (m_TaskManager->GetMaxTasks() > 20) {
        m_Socket.Listen(m_TaskManager->GetMaxTasks());
    }
    
    // start a task to listen for incoming connections
    // and keep it around so we can abort the server
    m_HttpListenTask = new PLT_HttpListenTask(this, &m_Socket, false);
    m_TaskManager->StartTask(m_HttpListenTask, NULL, false);

    NPT_SocketInfo info;
    m_Socket.GetInfo(info);
    NPT_LOG_INFO_2("HttpServer listening on %s:%d", 
        (const char*)info.local_address.GetIpAddress().ToString(), 
        m_Port);
    return NPT_SUCCESS;
}

开发者ID:CBers，项目名称:MediaBrowser.Plugins，代码行数:55，代码来源:PltHttpServer.cpp

示例6: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_HttpClient::Connect
+---------------------------------------------------------------------*/
NPT_Result
PLT_HttpClient::Connect(NPT_Socket* connection, NPT_HttpRequest& request, NPT_Timeout timeout)
{
    // get the address of the server
    NPT_IpAddress server_address;
    NPT_CHECK_SEVERE(server_address.ResolveName(request.GetUrl().GetHost(), timeout));
    NPT_SocketAddress address(server_address, request.GetUrl().GetPort());

    // connect to the server
    NPT_LOG_FINER_2("Connecting to %s:%d\n", (const char*)request.GetUrl().GetHost(), request.GetUrl().GetPort());
    NPT_CHECK_SEVERE(connection->Connect(address, timeout));

    return NPT_SUCCESS;
}

开发者ID:Avoidnf8，项目名称:xbmc-fork，代码行数:17，代码来源:PltHttp.cpp

示例7: NPT_XmlElementNode

/*----------------------------------------------------------------------
|   PLT_ArgumentDesc::GetSCPDXML
+---------------------------------------------------------------------*/
NPT_Result
PLT_ArgumentDesc::GetSCPDXML(NPT_XmlElementNode* node)
{
    NPT_XmlElementNode* argument = new NPT_XmlElementNode("argument");
    NPT_CHECK_SEVERE(node->AddChild(argument));
    NPT_CHECK_SEVERE(PLT_XmlHelper::AddChildText(argument, "name", m_Name));
    NPT_CHECK_SEVERE(PLT_XmlHelper::AddChildText(argument, "direction", m_Direction));
    NPT_CHECK_SEVERE(PLT_XmlHelper::AddChildText(argument, "relatedStateVariable", m_RelatedStateVariable->GetName()));

    if (m_HasReturnValue) {
        NPT_CHECK_SEVERE(argument->AddChild(new NPT_XmlElementNode("retval")));
    }
    
    return NPT_SUCCESS;
}

开发者ID:Castlecard，项目名称:plex，代码行数:18，代码来源:PltArgument.cpp

示例8: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
 |   CUPnPRenderer::OnSetAVTransportURI
 +---------------------------------------------------------------------*/
NPT_Result
CUPnPRenderer::OnSetNextAVTransportURI(PLT_ActionReference& action)
{
    NPT_String uri, meta;
    PLT_Service* service;
    NPT_CHECK_SEVERE(FindServiceByType("urn:schemas-upnp-org:service:AVTransport:1", service));

    NPT_CHECK_SEVERE(action->GetArgumentValue("NextURI", uri));
    NPT_CHECK_SEVERE(action->GetArgumentValue("NextURIMetaData", meta));

    CFileItemPtr item = GetFileItem(uri, meta);
    if (!item) {
        return NPT_FAILURE;
    }
#if 0
    if (g_application.m_pPlayer->IsPlaying()) {

        int playlist = PLAYLIST_MUSIC;
        if(item->IsVideo())
          playlist = PLAYLIST_VIDEO;

        {   CSingleLock lock(g_graphicsContext);
            g_playlistPlayer.ClearPlaylist(playlist);
            g_playlistPlayer.Add(playlist, item);

            g_playlistPlayer.SetCurrentSong(-1);
            g_playlistPlayer.SetCurrentPlaylist(playlist);
        }

        CGUIMessage msg(GUI_MSG_PLAYLIST_CHANGED, 0, 0);
        g_windowManager.SendThreadMessage(msg);


        service->SetStateVariable("NextAVTransportURI", uri);
        service->SetStateVariable("NextAVTransportURIMetaData", meta);

        NPT_CHECK_SEVERE(action->SetArgumentsOutFromStateVariable());

        return NPT_SUCCESS;

  } else if (g_windowManager.GetActiveWindow() == WINDOW_SLIDESHOW) {
        return NPT_FAILURE;
  } else {
        return NPT_FAILURE;
  }
#endif
  return NPT_SUCCESS;
}

开发者ID:cvsuser-chromium，项目名称:librhino，代码行数:51，代码来源:UPnPRenderer.cpp

示例9: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_MediaController::SetVolume
+---------------------------------------------------------------------*/
NPT_Result PLT_MediaController::SetVolume(PLT_DeviceDataReference&  device,
										  NPT_UInt32				instance_id, 
										  const char*               channel,
										  int						volume, 
										  void*						userdata) 
{

    PLT_ActionReference action;
    NPT_CHECK_SEVERE(m_CtrlPoint->CreateAction(
        device, 
        "urn:schemas-upnp-org:service:RenderingControl:1", 
        "SetVolume", 
        action));

	    // set the channel
    if (NPT_FAILED(action->SetArgumentValue("Channel", channel))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

	if (NPT_FAILED(action->SetArgumentValue("DesiredVolume",  
											NPT_String::FromInteger(volume)))) {
		return NPT_ERROR_INVALID_PARAMETERS;
	}

    return InvokeActionWithInstance(action, instance_id, userdata);
}

开发者ID:fangxingli，项目名称:H3DLNA，代码行数:29，代码来源:PltMediaController.cpp

示例10: while

/*----------------------------------------------------------------------
|   PLT_MediaContainer::ToDidl
+---------------------------------------------------------------------*/
NPT_Result
PLT_MediaContainer::ToDidl(NPT_UInt32 mask, NPT_String& didl)
{
	// container id property
    didl += "<container id=\"";
    PLT_Didl::AppendXmlEscape(didl, m_ObjectID);

	// parent id property
    didl += "\" parentID=\"";
    PLT_Didl::AppendXmlEscape(didl, m_ParentID);
	
	// ref id
    if ((mask & PLT_FILTER_MASK_REFID) && !m_ReferenceID.IsEmpty()) {
		didl += "\" refID=\"";
		PLT_Didl::AppendXmlEscape(didl, m_ReferenceID);
    }

	// restricted property
    didl += "\" restricted=\"";
    didl += m_Restricted?"1\"":"0\"";

	// searchable property
    if (mask & PLT_FILTER_MASK_SEARCHABLE) {
        didl += " searchable=\"";
        didl += m_Searchable?"1\"":"0\"";
    }
    
	// childcount property
    if ((mask & PLT_FILTER_MASK_CHILDCOUNT) && m_ChildrenCount != -1) {
        didl += " childCount=\"";
        didl += NPT_String::FromInteger(m_ChildrenCount);
        didl += "\"";
    }

    didl += ">";

	if ((mask & PLT_FILTER_MASK_SEARCHCLASS) && m_SearchClasses.GetItemCount()) {
		NPT_List<PLT_SearchClass>::Iterator search_class = m_SearchClasses.GetFirstItem();
		while (search_class) {
			didl += "<upnp:searchClass includeDerived=\"";
			didl += (*search_class).include_derived?"1\"":"0\"";

			// frienly name is any
			if (!(*search_class).friendly_name.IsEmpty()) {
				didl += " name=\"" + (*search_class).friendly_name + "\"";
			}
			didl += ">";
			didl += (*search_class).type;
			didl += "</upnp:searchClass>";

			++search_class;
		}
	}

    NPT_CHECK_SEVERE(PLT_MediaObject::ToDidl(mask, didl));

    /* close tag */
    didl += "</container>";
    return NPT_SUCCESS;
}

开发者ID:DanielCoufal，项目名称:xbmc，代码行数:63，代码来源:PltMediaItem.cpp

示例11: NPT_CHECK_WARNING

/*----------------------------------------------------------------------
|   PLT_MediaRenderer::OnSetAVTransportURI
+---------------------------------------------------------------------*/
NPT_Result
PLT_MediaRenderer::OnSetAVTransportURI(PLT_ActionReference& action)
{
    if (m_Delegate) {
        return m_Delegate->OnSetAVTransportURI(action);
    }

    // default implementation is using state variable
    NPT_String uri;
    NPT_CHECK_WARNING(action->GetArgumentValue("CurrentURI", uri));

    NPT_String metadata;
    NPT_CHECK_WARNING(action->GetArgumentValue("CurrentURIMetaData", metadata));

    PLT_Service* serviceAVT;
    NPT_CHECK_WARNING(FindServiceByType("urn:schemas-upnp-org:service:AVTransport:1", serviceAVT));

    // update service state variables
    serviceAVT->SetStateVariable("AVTransportURI", uri);
    serviceAVT->SetStateVariable("AVTransportURIMetaData", metadata);

    serviceAVT->SetStateVariable("TransportState", "STOPPED");
    serviceAVT->SetStateVariable("TransportStatus", "OK");
    serviceAVT->SetStateVariable("TransportPlaySpeed", "1");


    NPT_CHECK_SEVERE(action->SetArgumentsOutFromStateVariable());


    return NPT_SUCCESS;
}

开发者ID:arifcode，项目名称:Platinum-fork，代码行数:34，代码来源:PltMediaRenderer.cpp

示例12: NPT_CHECK_WARNING

/*----------------------------------------------------------------------
|   PLT_MediaBrowser::Browse
+---------------------------------------------------------------------*/
NPT_Result 
PLT_MediaBrowser::Browse(PLT_DeviceDataReference& device, 
                         const char*              obj_id,
                         NPT_UInt32               start_index,
                         NPT_UInt32               count,
                         bool                     browse_metadata,
                         const char*              filter,
                         const char*              sort_criteria,
                         void*                    userdata)
{
    // verify device still in our list
    PLT_DeviceDataReference device_data;
    NPT_CHECK_WARNING(FindServer(device->GetUUID(), device_data));

    // create action
    PLT_ActionReference action;
    NPT_CHECK_SEVERE(m_CtrlPoint->CreateAction(
        device, 
        "urn:schemas-upnp-org:service:ContentDirectory:1",
        "Browse",
        action));

    // Set the object id
    PLT_Arguments args;
    if (NPT_FAILED(action->SetArgumentValue("ObjectID", obj_id))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

    // set the browse_flag
    if (NPT_FAILED(action->SetArgumentValue("BrowseFlag", browse_metadata?"BrowseMetadata":"BrowseDirectChildren"))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }
 
    // set the Filter
    if (NPT_FAILED(action->SetArgumentValue("Filter", filter))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

    // set the Starting Index
    if (NPT_FAILED(action->SetArgumentValue("StartingIndex", NPT_String::FromInteger(start_index)))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

    // set the Requested Count
    if (NPT_FAILED(action->SetArgumentValue("RequestedCount", NPT_String::FromInteger(count)))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

    // set the Requested Count
    if (NPT_FAILED(action->SetArgumentValue("SortCriteria", sort_criteria))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

    // invoke the action
    if (NPT_FAILED(m_CtrlPoint->InvokeAction(action, userdata))) {
        return NPT_ERROR_INVALID_PARAMETERS;
    }

    return NPT_SUCCESS;
}

开发者ID:AWilco，项目名称:xbmc，代码行数:63，代码来源:PltMediaBrowser.cpp

示例13: InvokeUpdateObject

    bool InvokeUpdateObject(const char* id, const char* curr_value, const char* new_value)
    {
        CURL url(id);
        PLT_DeviceDataReference device;
        PLT_Service* cds;
        PLT_ActionReference action;

        CLog::Log(LOGDEBUG, "UPNP: attempting to invoke UpdateObject for %s", id);

        // check this server supports UpdateObject action
        NPT_CHECK_LABEL(FindServer(url.GetHostName().c_str(), device),failed);
        NPT_CHECK_LABEL(device->FindServiceById("urn:upnp-org:serviceId:ContentDirectory", cds),failed);

        NPT_CHECK_SEVERE(m_CtrlPoint->CreateAction(
            device,
            "urn:schemas-upnp-org:service:ContentDirectory:1",
            "UpdateObject",
            action));

        NPT_CHECK_LABEL(action->SetArgumentValue("ObjectID", url.GetFileName().c_str()), failed);
        NPT_CHECK_LABEL(action->SetArgumentValue("CurrentTagValue", curr_value), failed);
        NPT_CHECK_LABEL(action->SetArgumentValue("NewTagValue", new_value), failed);

        NPT_CHECK_LABEL(m_CtrlPoint->InvokeAction(action, NULL),failed);

        CLog::Log(LOGDEBUG, "UPNP: invoked UpdateObject successfully");
        return true;

    failed:
        CLog::Log(LOGINFO, "UPNP: invoking UpdateObject failed");
        return false;
    }

开发者ID:crckmc，项目名称:xbmc-boblight，代码行数:32，代码来源:UPnP.cpp

示例14: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_MediaItem::ToDidl
+---------------------------------------------------------------------*/
NPT_Result
PLT_MediaItem::ToDidl(NPT_UInt32 mask, NPT_String& didl)
{
    NPT_String tmp;
    // Allocate enough space for a big string we're going to concatenate in
    tmp.Reserve(2048);

    tmp = "<item id=\"";

    PLT_Didl::AppendXmlEscape(tmp, m_ObjectID);
    tmp += "\" parentID=\"";
    PLT_Didl::AppendXmlEscape(tmp, m_ParentID);

    if (!m_ReferenceID.IsEmpty()) {
		tmp += "\" refID=\"";
		PLT_Didl::AppendXmlEscape(tmp, m_ReferenceID);
    }

    tmp += "\" restricted=\"";
    tmp += m_Restricted?"1\"":"0\"";

    tmp += ">";

    NPT_CHECK_SEVERE(PLT_MediaObject::ToDidl(mask, tmp));

    /* close tag */
    tmp += "</item>";

    didl += tmp;
    return NPT_SUCCESS;
}

开发者ID:barrycburton，项目名称:Platinum，代码行数:34，代码来源:PltMediaItem.cpp

示例15: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_SsdpSender::SendSsdp
+---------------------------------------------------------------------*/
NPT_Result
PLT_SsdpSender::SendSsdp(NPT_HttpRequest&   request,
                         const char*        usn,
                         const char*        target,
                         NPT_UdpSocket&     socket,
                         bool               notify,
                         const NPT_SocketAddress* addr /* = NULL */)
{
    NPT_CHECK_SEVERE(FormatPacket(request, usn, target, socket, notify));

    // logging
    NPT_String prefix = NPT_String::Format("Sending SSDP %s packet for %s",
        (const char*)request.GetMethod(), 
        usn);
    PLT_LOG_HTTP_MESSAGE(NPT_LOG_LEVEL_FINER, prefix, &request);

    // use a memory stream to write all the data
    NPT_MemoryStream stream;
    NPT_Result res = request.Emit(stream);
    NPT_CHECK(res);

    // copy stream into a data packet and send it
    NPT_LargeSize size;
    stream.GetSize(size);
    if (size != (NPT_Size)size) NPT_CHECK(NPT_ERROR_OUT_OF_RANGE);

    NPT_DataBuffer packet(stream.GetData(), (NPT_Size)size);
    NPT_CHECK_WARNING(socket.Send(packet, addr));
    return NPT_SUCCESS;
}

开发者ID:CBers，项目名称:MediaBrowser.Plugins，代码行数:33，代码来源:PltSsdp.cpp

示例16: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_MediaItem::ToDidl
+---------------------------------------------------------------------*/
NPT_Result
PLT_MediaItem::ToDidl(NPT_UInt32 mask, NPT_String& didl)
{
    didl += "<item id=\"";

    PLT_Didl::AppendXmlEscape(didl, m_ObjectID);
    didl += "\" parentID=\"";
    PLT_Didl::AppendXmlEscape(didl, m_ParentID);

    if ((mask & PLT_FILTER_MASK_REFID) && !m_ReferenceID.IsEmpty()) {
		didl += "\" refID=\"";
		PLT_Didl::AppendXmlEscape(didl, m_ReferenceID);
    }

    didl += "\" restricted=\"";
    didl += m_Restricted?"1\"":"0\"";

    didl += ">";

    NPT_CHECK_SEVERE(PLT_MediaObject::ToDidl(mask, didl));

    /* close tag */
    didl += "</item>";

    return NPT_SUCCESS;
}

开发者ID:DanielCoufal，项目名称:xbmc，代码行数:29，代码来源:PltMediaItem.cpp

示例17: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_SsdpSender::SendSsdp
+---------------------------------------------------------------------*/
NPT_Result
PLT_SsdpSender::SendSsdp(NPT_HttpResponse&  response,
                         const char*        usn,
                         const char*        target,
                         NPT_UdpSocket&     socket,
                         bool               notify, 
                         const NPT_SocketAddress* addr /* = NULL */)
{
    NPT_CHECK_SEVERE(FormatPacket(response, usn, target, socket, notify));

    // logging
    NPT_LOG_FINE("Sending SSDP:");
    PLT_LOG_HTTP_MESSAGE(NPT_LOG_LEVEL_FINE, &response);

    // use a memory stream to write all the data
    NPT_MemoryStream stream;
    NPT_Result res = response.Emit(stream);
    if (NPT_FAILED(res)) return res;

    // copy stream into a data packet and send it
    NPT_LargeSize size;
    stream.GetSize(size);
    if (size != (NPT_Size)size) return NPT_ERROR_OUT_OF_RANGE;

    NPT_DataBuffer packet(stream.GetData(), (NPT_Size)size);
    return socket.Send(packet, addr);
}

开发者ID:Castlecard，项目名称:plex，代码行数:30，代码来源:PltSsdp.cpp

示例18: PLT_BrowseDataReference

/*----------------------------------------------------------------------
|   PLT_SyncMediaBrowser::BrowseSync
+---------------------------------------------------------------------*/
NPT_Result 
PLT_SyncMediaBrowser::BrowseSync(PLT_BrowseDataReference& browse_data,
                                 PLT_DeviceDataReference& device, 
                                 const char*              object_id, 
                                 NPT_Int32                index, 
                                 NPT_Int32                count,
                                 bool                     browse_metadata,
                                 const char*              filter, 
                                 const char*              sort)
{
    NPT_Result res;

    browse_data->shared_var.SetValue(0);

    // send off the browse packet.  Note that this will
    // not block.  There is a call to WaitForResponse in order
    // to block until the response comes back.
    res = PLT_MediaBrowser::Browse(device,
        (const char*)object_id,
        index,
        count,
        browse_metadata,
        filter,
        sort,
        new PLT_BrowseDataReference(browse_data));		
    NPT_CHECK_SEVERE(res);

    return WaitForResponse(browse_data->shared_var);
}

开发者ID:AWilco，项目名称:xbmc，代码行数:32，代码来源:PltSyncMediaBrowser.cpp

示例19: main

/*----------------------------------------------------------------------
|   main
+---------------------------------------------------------------------*/
int
main(int /* argc */, char** argv)
{
    /* parse command line */
    ParseCommandLine(argv+1);

    PLT_UPnP upnp(1900, !Options.broadcast);

    PLT_DeviceHostReference device(
        new PLT_FileMediaServer(
            Options.path, 
            Options.friendly_name?Options.friendly_name:"Platinum UPnP Media Server",
            false,
            "SAMEDEVICEGUID",
            (NPT_UInt16)Options.port)
            );

    NPT_List<NPT_String> list;
    NPT_CHECK_SEVERE(PLT_UPnPMessageHelper::GetIPAddresses(list));
    NPT_String ip = *(list.GetFirstItem());

    //device->m_PresentationURL = NPT_HttpUrl(ip, 80, "/").ToString();
    device->m_ModelDescription = "Platinum File Media Server";
    device->m_ModelURL = "http://www.plutinosoft.com/";
    device->m_ModelNumber = "1.0";
    device->m_ModelName = "Platinum File Media Server";
    device->m_Manufacturer = "Plutinosoft";
    device->m_ManufacturerURL = "http://www.plutinosoft.com/";

    if (Options.broadcast) device->SetBroadcast(true);

    upnp.AddDevice(device);
    NPT_String uuid = device->GetUUID();

    NPT_CHECK_SEVERE(upnp.Start());
    NPT_LOG_INFO("Press 'q' to quit.");

    char buf[256];
    while (gets(buf)) {
        if (*buf == 'q')
            break;
    }

    upnp.Stop();

    return 0;
}

开发者ID:Castlecard，项目名称:plex，代码行数:50，代码来源:FileMediaServerTest.cpp

示例20: NPT_CHECK_SEVERE

/*----------------------------------------------------------------------
|   PLT_Argument::SetValue
+---------------------------------------------------------------------*/
NPT_Result
PLT_Argument::SetValue(const char* value) 
{
    NPT_CHECK_SEVERE(ValidateValue(value));

    m_Value = value;
    return NPT_SUCCESS;
}

开发者ID:Castlecard，项目名称:plex，代码行数:11，代码来源:PltArgument.cpp

注：本文中的NPT_CHECK_SEVERE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NPT_COMPILER_UNUSED函数代码示例发布时间：2022-05-30

C++ NPC_Util_GetStrFromStrWithDelim函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18209|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9374|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ NPT_CHECK_SEVERE函数代码示例

示例1: NPT_CHECK_SEVERE

示例2: NPT_LOG_INFO_2

示例3: NPT_LOG_INFO

示例4: NPT_CHECK_WARNING

示例5: SetListenPort

示例6: NPT_CHECK_SEVERE

示例7: NPT_XmlElementNode

示例8: NPT_CHECK_SEVERE

示例9: NPT_CHECK_SEVERE

示例10: while

示例11: NPT_CHECK_WARNING

示例12: NPT_CHECK_WARNING

示例13: InvokeUpdateObject

示例14: NPT_CHECK_SEVERE

示例15: NPT_CHECK_SEVERE

示例16: NPT_CHECK_SEVERE

示例17: NPT_CHECK_SEVERE

示例18: PLT_BrowseDataReference

示例19: main

示例20: NPT_CHECK_SEVERE

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

delphi线程使用

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

matlab2014b安装 libSVM

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053