C++ NRFX_LOG_INFO函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NRFX_LOG_INFO函数的典型用法代码示例。如果您正苦于以下问题：C++ NRFX_LOG_INFO函数的具体用法？C++ NRFX_LOG_INFO怎么用？C++ NRFX_LOG_INFO使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NRFX_LOG_INFO函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: nrfx_rtc_cc_disable

nrfx_err_t nrfx_rtc_cc_disable(nrfx_rtc_t const * const p_instance, uint32_t channel)
{
    NRFX_ASSERT(m_cb[p_instance->instance_id].state != NRFX_DRV_STATE_UNINITIALIZED);
    NRFX_ASSERT(channel<p_instance->cc_channel_count);

    nrfx_err_t err_code;
    uint32_t int_mask = RTC_CHANNEL_INT_MASK(channel);
    nrf_rtc_event_t event    = RTC_CHANNEL_EVENT_ADDR(channel);

    nrf_rtc_event_disable(p_instance->p_reg,int_mask);
    if (nrf_rtc_int_is_enabled(p_instance->p_reg,int_mask))
    {
        nrf_rtc_int_disable(p_instance->p_reg,int_mask);
        if (nrf_rtc_event_pending(p_instance->p_reg,event))
        {
            nrf_rtc_event_clear(p_instance->p_reg,event);
            err_code = NRFX_ERROR_TIMEOUT;
            NRFX_LOG_WARNING("Function: %s, error code: %s.",
                             __func__,
                             NRFX_LOG_ERROR_STRING_GET(err_code));
            return err_code;
        }
    }
    NRFX_LOG_INFO("RTC id: %d, channel disabled: %lu.", p_instance->instance_id, channel);
    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:turon，项目名称:openthread，代码行数:28，代码来源:nrfx_rtc.c

示例2: nrfx_dppi_channel_alloc

nrfx_err_t nrfx_dppi_channel_alloc(uint8_t * p_channel)
{
    nrfx_err_t err_code;

    // Get mask of available DPPI channels
    uint32_t remaining_channels = DPPI_AVAILABLE_CHANNELS_MASK & ~(m_allocated_channels);
    uint8_t channel = 0;

    if (!remaining_channels)
    {
        err_code = NRFX_ERROR_NO_MEM;
        NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }

    // Find first free channel
    while (!(remaining_channels & DPPI_BIT_SET(channel)))
    {
        channel++;
    }

    m_allocated_channels |= DPPI_BIT_SET(channel);
    *p_channel = channel;

    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Allocated channel: %d.", channel);
    return err_code;
}

开发者ID:abtink，项目名称:openthread，代码行数:28，代码来源:nrfx_dppi.c

示例3: nrfx_twim_xfer

nrfx_err_t nrfx_twim_xfer(nrfx_twim_t           const * p_instance,
                          nrfx_twim_xfer_desc_t const * p_xfer_desc,
                          uint32_t                      flags)
{
    NRFX_ASSERT(TWIM_LENGTH_VALIDATE(p_instance->drv_inst_idx,
                                     p_xfer_desc->primary_length,
                                     p_xfer_desc->secondary_length));

    nrfx_err_t err_code = NRFX_SUCCESS;
    twim_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx];

    // TXRX and TXTX transfers are supported only in non-blocking mode.
    NRFX_ASSERT( !((p_cb->handler == NULL) && (p_xfer_desc->type == NRFX_TWIM_XFER_TXRX)));
    NRFX_ASSERT( !((p_cb->handler == NULL) && (p_xfer_desc->type == NRFX_TWIM_XFER_TXTX)));

    NRFX_LOG_INFO("Transfer type: %s.", TRANSFER_TO_STR(p_xfer_desc->type));
    NRFX_LOG_INFO("Transfer buffers length: primary: %d, secondary: %d.",
                  p_xfer_desc->primary_length,
                  p_xfer_desc->secondary_length);
    NRFX_LOG_DEBUG("Primary buffer data:");
    NRFX_LOG_HEXDUMP_DEBUG(p_xfer_desc->p_primary_buf,
                           p_xfer_desc->primary_length * sizeof(p_xfer_desc->p_primary_buf[0]));
    NRFX_LOG_DEBUG("Secondary buffer data:");
    NRFX_LOG_HEXDUMP_DEBUG(p_xfer_desc->p_secondary_buf,
                           p_xfer_desc->secondary_length * sizeof(p_xfer_desc->p_secondary_buf[0]));

    err_code = twim_xfer(p_cb, (NRF_TWIM_Type *)p_instance->p_twim, p_xfer_desc, flags);
    NRFX_LOG_WARNING("Function: %s, error code: %s.",
                     __func__,
                     NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:ccollins476ad，项目名称:incubator-mynewt-core，代码行数:32，代码来源:nrfx_twim.c

示例4: nrfx_dppi_group_alloc

nrfx_err_t nrfx_dppi_group_alloc(nrf_dppi_channel_group_t * p_group)
{
    nrfx_err_t err_code;

    // Get mask of available DPPI groups
    uint32_t remaining_groups = DPPI_AVAILABLE_GROUPS_MASK & ~(m_allocated_groups);
    nrf_dppi_channel_group_t group = NRF_DPPI_CHANNEL_GROUP0;

    if (!remaining_groups)
    {
        err_code = NRFX_ERROR_NO_MEM;
        NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }

    // Find first free group
    while (!(remaining_groups & DPPI_BIT_SET(group)))
    {
        group++;
    }

    m_allocated_groups |= DPPI_BIT_SET(group);
    *p_group = group;

    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Allocated channel: %d.", group);
    return err_code;
}

开发者ID:abtink，项目名称:openthread，代码行数:28，代码来源:nrfx_dppi.c

示例5: nrfx_uart_tx

nrfx_err_t nrfx_uart_tx(nrfx_uart_t const * p_instance,
                        uint8_t const *     p_data,
                        size_t              length)
{
    uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx];
    NRFX_ASSERT(p_cb->state == NRFX_DRV_STATE_INITIALIZED);
    NRFX_ASSERT(p_data);
    NRFX_ASSERT(length > 0);

    nrfx_err_t err_code;

    if (nrfx_uart_tx_in_progress(p_instance))
    {
        err_code = NRFX_ERROR_BUSY;
        NRFX_LOG_WARNING("Function: %s, error code: %s.",
                         __func__,
                         NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }
    p_cb->tx_buffer_length = length;
    p_cb->p_tx_buffer      = p_data;
    p_cb->tx_counter       = 0;
    p_cb->tx_abort         = false;

    NRFX_LOG_INFO("Transfer tx_len: %d.", p_cb->tx_buffer_length);
    NRFX_LOG_DEBUG("Tx data:");
    NRFX_LOG_HEXDUMP_DEBUG(p_cb->p_tx_buffer,
                           p_cb->tx_buffer_length * sizeof(p_cb->p_tx_buffer[0]));

    err_code = NRFX_SUCCESS;

    nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_TXDRDY);
    nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STARTTX);

    tx_byte(p_instance->p_reg, p_cb);

    if (p_cb->handler == NULL)
    {
        if (!tx_blocking(p_instance->p_reg, p_cb))
        {
            // The transfer has been aborted.
            err_code = NRFX_ERROR_FORBIDDEN;
        }
        else
        {
            // Wait until the last byte is completely transmitted.
            while (!nrf_uart_event_check(p_instance->p_reg, NRF_UART_EVENT_TXDRDY))
            {}
            nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPTX);
        }
        p_cb->tx_buffer_length = 0;
    }

    NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:abtink，项目名称:openthread，代码行数:56，代码来源:nrfx_uart.c

示例6: nrfx_rtc_cc_set

nrfx_err_t nrfx_rtc_cc_set(nrfx_rtc_t const * const p_instance,
                           uint32_t channel,
                           uint32_t val,
                           bool enable_irq)
{
    NRFX_ASSERT(m_cb[p_instance->instance_id].state != NRFX_DRV_STATE_UNINITIALIZED);
    NRFX_ASSERT(channel<p_instance->cc_channel_count);

    nrfx_err_t err_code;
    uint32_t int_mask = RTC_CHANNEL_INT_MASK(channel);
    nrf_rtc_event_t event    = RTC_CHANNEL_EVENT_ADDR(channel);

    nrf_rtc_event_disable(p_instance->p_reg, int_mask);
    nrf_rtc_int_disable(p_instance->p_reg, int_mask);

    val = RTC_WRAP(val);
    if (m_cb[p_instance->instance_id].reliable)
    {
        nrf_rtc_cc_set(p_instance->p_reg,channel,val);
        uint32_t cnt = nrf_rtc_counter_get(p_instance->p_reg);
        int32_t diff = cnt - val;
        if (cnt < val)
        {
            diff += RTC_COUNTER_COUNTER_Msk;
        }
        if (diff < m_cb[p_instance->instance_id].tick_latency)
        {
            err_code = NRFX_ERROR_TIMEOUT;
            NRFX_LOG_WARNING("Function: %s, error code: %s.",
                             __func__,
                             NRFX_LOG_ERROR_STRING_GET(err_code));
            return err_code;
        }
    }
    else
    {
        nrf_rtc_cc_set(p_instance->p_reg,channel,val);
    }

    if (enable_irq)
    {
        nrf_rtc_event_clear(p_instance->p_reg,event);
        nrf_rtc_int_enable(p_instance->p_reg, int_mask);
    }
    nrf_rtc_event_enable(p_instance->p_reg,int_mask);

    NRFX_LOG_INFO("RTC id: %d, channel enabled: %lu, compare value: %lu.",
                  p_instance->instance_id,
                  channel,
                  val);
    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:turon，项目名称:openthread，代码行数:54，代码来源:nrfx_rtc.c

示例7: nrfx_adc_buffer_convert

nrfx_err_t nrfx_adc_buffer_convert(nrf_adc_value_t * buffer, uint16_t size)
{
    NRFX_ASSERT(m_cb.state != NRFX_DRV_STATE_UNINITIALIZED);

    nrfx_err_t err_code;

    NRFX_LOG_INFO("Number of samples requested to convert: %d.", size);

    if (m_cb.state == NRFX_DRV_STATE_POWERED_ON)
    {
        err_code = NRFX_ERROR_BUSY;
        NRFX_LOG_WARNING("Function: %s, error code: %s.",
                         __func__,
                         NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }
    else
    {
        m_cb.state          = NRFX_DRV_STATE_POWERED_ON;
        m_cb.p_current_conv = m_cb.p_head;
        m_cb.size           = size;
        m_cb.idx            = 0;
        m_cb.p_buffer       = buffer;
        nrf_adc_config_set(m_cb.p_current_conv->config.data);
        nrf_adc_event_clear(NRF_ADC_EVENT_END);
        nrf_adc_enable();
        if (m_cb.event_handler)
        {
            nrf_adc_int_enable(NRF_ADC_INT_END_MASK);
        }
        else
        {
            while (1)
            {
                while (!nrf_adc_event_check(NRF_ADC_EVENT_END)){}

                if (adc_sample_process())
                {
                    m_cb.state = NRFX_DRV_STATE_INITIALIZED;
                    break;
                }
            }
        }
        err_code = NRFX_SUCCESS;
        NRFX_LOG_INFO("Function: %s, error code: %s.",
                      __func__,
                      NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }
}

开发者ID:bgiori，项目名称:incubator-mynewt-core，代码行数:50，代码来源:nrfx_adc.c

示例8: nrfx_pwm_stop

bool nrfx_pwm_stop(nrfx_pwm_t const * const p_instance,
                   bool wait_until_stopped)
{
    NRFX_ASSERT(m_cb[p_instance->drv_inst_idx].state != NRFX_DRV_STATE_UNINITIALIZED);

    bool ret_val = false;

    if (nrfx_pwm_is_stopped(p_instance))
    {
        ret_val = true;
    }
    else
    {
        nrf_pwm_task_trigger(p_instance->p_registers, NRF_PWM_TASK_STOP);

        do {
            if (nrfx_pwm_is_stopped(p_instance))
            {
                ret_val = true;
                break;
            }
        } while (wait_until_stopped);
    }

    NRFX_LOG_INFO("%s returned %d.", __func__, ret_val);
    return ret_val;
}

开发者ID:ccollins476ad，项目名称:incubator-mynewt-core，代码行数:27，代码来源:nrfx_pwm.c

示例9: nrfx_adc_init

nrfx_err_t nrfx_adc_init(nrfx_adc_config_t const * p_config,
                         nrfx_adc_event_handler_t  event_handler)
{
    NRFX_ASSERT(p_config);
    nrfx_err_t err_code;

    if (m_cb.state != NRFX_DRV_STATE_UNINITIALIZED)
    {
        err_code = NRFX_ERROR_INVALID_STATE;
        NRFX_LOG_WARNING("Function: %s, error code: %s.",
                         __func__,
                         NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }

    nrf_adc_event_clear(NRF_ADC_EVENT_END);
    if (event_handler)
    {
        NRFX_IRQ_PRIORITY_SET(ADC_IRQn, p_config->interrupt_priority);
        NRFX_IRQ_ENABLE(ADC_IRQn);
    }
    m_cb.event_handler = event_handler;
    m_cb.state = NRFX_DRV_STATE_INITIALIZED;

    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:bgiori，项目名称:incubator-mynewt-core，代码行数:28，代码来源:nrfx_adc.c

示例10: nrfx_rtc_init

nrfx_err_t nrfx_rtc_init(nrfx_rtc_t const * const  p_instance,
                         nrfx_rtc_config_t const * p_config,
                         nrfx_rtc_handler_t        handler)
{
    NRFX_ASSERT(p_config);
    NRFX_ASSERT(handler);
    nrfx_err_t err_code;

    m_handlers[p_instance->instance_id] = handler;

    if (m_cb[p_instance->instance_id].state != NRFX_DRV_STATE_UNINITIALIZED)
    {
        err_code = NRFX_ERROR_INVALID_STATE;
        NRFX_LOG_WARNING("Function: %s, error code: %s.",
                         __func__,
                         NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }

    NRFX_IRQ_PRIORITY_SET(p_instance->irq, p_config->interrupt_priority);
    NRFX_IRQ_ENABLE(p_instance->irq);
    nrf_rtc_prescaler_set(p_instance->p_reg, p_config->prescaler);
    m_cb[p_instance->instance_id].reliable     = p_config->reliable;
    m_cb[p_instance->instance_id].tick_latency = p_config->tick_latency;
    m_cb[p_instance->instance_id].state        = NRFX_DRV_STATE_INITIALIZED;

    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:turon，项目名称:openthread，代码行数:30，代码来源:nrfx_rtc.c

示例11: nrfx_pwm_init

nrfx_err_t nrfx_pwm_init(nrfx_pwm_t const * const p_instance,
                         nrfx_pwm_config_t const * p_config,
                         nrfx_pwm_handler_t        handler)
{
    NRFX_ASSERT(p_config);

    nrfx_err_t err_code;

    pwm_control_block_t * p_cb  = &m_cb[p_instance->drv_inst_idx];

    if (p_cb->state != NRFX_DRV_STATE_UNINITIALIZED)
    {
        err_code = NRFX_ERROR_INVALID_STATE;
        NRFX_LOG_WARNING("Function: %s, error code: %s.",
                         __func__,
                         NRFX_LOG_ERROR_STRING_GET(err_code));
        return err_code;
    }

    p_cb->handler = handler;

    configure_pins(p_instance, p_config);

    nrf_pwm_enable(p_instance->p_registers);
    nrf_pwm_configure(p_instance->p_registers,
        p_config->base_clock, p_config->count_mode, p_config->top_value);
    nrf_pwm_decoder_set(p_instance->p_registers,
        p_config->load_mode, p_config->step_mode);

    nrf_pwm_shorts_set(p_instance->p_registers, 0);
    nrf_pwm_int_set(p_instance->p_registers, 0);
    nrf_pwm_event_clear(p_instance->p_registers, NRF_PWM_EVENT_LOOPSDONE);
    nrf_pwm_event_clear(p_instance->p_registers, NRF_PWM_EVENT_SEQEND0);
    nrf_pwm_event_clear(p_instance->p_registers, NRF_PWM_EVENT_SEQEND1);
    nrf_pwm_event_clear(p_instance->p_registers, NRF_PWM_EVENT_STOPPED);

    // The workaround for nRF52 Anomaly 109 "protects" DMA transfers by handling
    // interrupts generated on SEQEND0 and SEQEND1 events (this ensures that
    // the 64 MHz clock is ready when data for the next sequence to be played
    // is read). Therefore, the PWM interrupt must be enabled even if the event
    // handler is not used.
#if defined(USE_DMA_ISSUE_WORKAROUND)
    NRFX_IRQ_PRIORITY_SET(DMA_ISSUE_EGU_IRQn, p_config->irq_priority);
    NRFX_IRQ_ENABLE(DMA_ISSUE_EGU_IRQn);
#else
    if (p_cb->handler)
#endif
    {
        NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number(p_instance->p_registers),
            p_config->irq_priority);
        NRFX_IRQ_ENABLE(nrfx_get_irq_number(p_instance->p_registers));
    }

    p_cb->state = NRFX_DRV_STATE_INITIALIZED;

    err_code = NRFX_SUCCESS;
    NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code));
    return err_code;
}

开发者ID:ccollins476ad，项目名称:incubator-mynewt-core，代码行数:59，代码来源:nrfx_pwm.c

示例12: nrfx_rtc_disable

void nrfx_rtc_disable(nrfx_rtc_t const * const p_instance)
{
    NRFX_ASSERT(m_cb[p_instance->instance_id].state != NRFX_DRV_STATE_UNINITIALIZED);

    nrf_rtc_task_trigger(p_instance->p_reg, NRF_RTC_TASK_STOP);
    m_cb[p_instance->instance_id].state = NRFX_DRV_STATE_INITIALIZED;
    NRFX_LOG_INFO("Disabled.");
}

开发者ID:turon，项目名称:openthread，代码行数:8，代码来源:nrfx_rtc.c

示例13: nrfx_clock_uninit

void nrfx_clock_uninit(void)
{
    NRFX_ASSERT(m_clock_cb.module_initialized);
    nrfx_clock_lfclk_stop();
    nrfx_clock_hfclk_stop();
    m_clock_cb.module_initialized = false;
    NRFX_LOG_INFO("Uninitialized.");
}

开发者ID:turon，项目名称:openthread，代码行数:8，代码来源:nrfx_clock.c

示例14: nrfx_qdec_disable

void nrfx_qdec_disable(void)
{
    NRFX_ASSERT(m_state == NRFX_DRV_STATE_POWERED_ON);
    nrf_qdec_task_trigger(NRF_QDEC_TASK_STOP);
    nrf_qdec_disable();
    m_state = NRFX_DRV_STATE_INITIALIZED;
    NRFX_LOG_INFO("Disabled.");
}

开发者ID:bgiori，项目名称:incubator-mynewt-core，代码行数:8，代码来源:nrfx_qdec.c

示例15: nrfx_qdec_uninit

void nrfx_qdec_uninit(void)
{
    NRFX_ASSERT(m_state != NRFX_DRV_STATE_UNINITIALIZED);
    nrfx_qdec_disable();
    NRFX_IRQ_DISABLE(QDEC_IRQn);
    m_state = NRFX_DRV_STATE_UNINITIALIZED;
    NRFX_LOG_INFO("Uninitialized.");
}

开发者ID:bgiori，项目名称:incubator-mynewt-core，代码行数:8，代码来源:nrfx_qdec.c

示例16: nrfx_uart_rx_abort

void nrfx_uart_rx_abort(nrfx_uart_t const * p_instance)
{
    nrf_uart_int_disable(p_instance->p_reg, NRF_UART_INT_MASK_RXDRDY |
                                            NRF_UART_INT_MASK_ERROR);
    nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPRX);

    NRFX_LOG_INFO("RX transaction aborted.");
}

开发者ID:abtink，项目名称:openthread，代码行数:8，代码来源:nrfx_uart.c

示例17: nrfx_rtc_tick_disable

void nrfx_rtc_tick_disable(nrfx_rtc_t const * const p_instance)
{
    uint32_t mask = NRF_RTC_INT_TICK_MASK;

    nrf_rtc_event_disable(p_instance->p_reg, mask);
    nrf_rtc_int_disable(p_instance->p_reg, mask);
    NRFX_LOG_INFO("Tick events disabled.");
}

开发者ID:turon，项目名称:openthread，代码行数:8，代码来源:nrfx_rtc.c

示例18: nrfx_rtc_enable

void nrfx_rtc_enable(nrfx_rtc_t const * const p_instance)
{
    NRFX_ASSERT(m_cb[p_instance->instance_id].state == NRFX_DRV_STATE_INITIALIZED);

    nrf_rtc_task_trigger(p_instance->p_reg, NRF_RTC_TASK_START);
    m_cb[p_instance->instance_id].state = NRFX_DRV_STATE_POWERED_ON;
    NRFX_LOG_INFO("Enabled.");
}

开发者ID:turon，项目名称:openthread，代码行数:8，代码来源:nrfx_rtc.c

示例19: nrfx_pwm_complex_playback

uint32_t nrfx_pwm_complex_playback(nrfx_pwm_t const * const p_instance,
                                   nrf_pwm_sequence_t const * p_sequence_0,
                                   nrf_pwm_sequence_t const * p_sequence_1,
                                   uint16_t                   playback_count,
                                   uint32_t                   flags)
{
    pwm_control_block_t * p_cb  = &m_cb[p_instance->drv_inst_idx];
    NRFX_ASSERT(p_cb->state != NRFX_DRV_STATE_UNINITIALIZED);
    NRFX_ASSERT(playback_count > 0);
    NRFX_ASSERT(nrfx_is_in_ram(p_sequence_0->values.p_raw));
    NRFX_ASSERT(nrfx_is_in_ram(p_sequence_1->values.p_raw));

    nrf_pwm_sequence_set(p_instance->p_registers, 0, p_sequence_0);
    nrf_pwm_sequence_set(p_instance->p_registers, 1, p_sequence_1);
    nrf_pwm_loop_set(p_instance->p_registers, playback_count);

    uint32_t shorts_mask;
    if (flags & NRFX_PWM_FLAG_STOP)
    {
        shorts_mask = NRF_PWM_SHORT_LOOPSDONE_STOP_MASK;
    }
    else if (flags & NRFX_PWM_FLAG_LOOP)
    {
        shorts_mask = NRF_PWM_SHORT_LOOPSDONE_SEQSTART0_MASK;
    }
    else
    {
        shorts_mask = 0;
    }
    nrf_pwm_shorts_set(p_instance->p_registers, shorts_mask);

    NRFX_LOG_INFO("Function: %s, sequence 0 length: %d.",
                  __func__,
                  p_sequence_0->length);
    NRFX_LOG_INFO("Function: %s, sequence 1 length: %d.",
                  __func__,
                  p_sequence_1->length);
    NRFX_LOG_DEBUG("Sequence 0 data:");
    NRFX_LOG_HEXDUMP_DEBUG(p_sequence_0->values.p_raw,
                           p_sequence_0->length * sizeof(uint16_t));
    NRFX_LOG_DEBUG("Sequence 1 data:");
    NRFX_LOG_HEXDUMP_DEBUG(p_sequence_1->values.p_raw,
                           p_sequence_1->length * sizeof(uint16_t));
    return start_playback(p_instance, p_cb, flags, NRF_PWM_TASK_SEQSTART0);
}

开发者ID:ccollins476ad，项目名称:incubator-mynewt-core，代码行数:45，代码来源:nrfx_pwm.c

示例20: nrfx_comp_stop

void nrfx_comp_stop(void)
{
    NRFX_ASSERT(m_state == NRFX_DRV_STATE_POWERED_ON);
    nrf_comp_shorts_disable(UINT32_MAX);
    nrf_comp_int_disable(UINT32_MAX);
    nrf_comp_task_trigger(NRF_COMP_TASK_STOP);
    m_state = NRFX_DRV_STATE_INITIALIZED;
    NRFX_LOG_INFO("Disabled.");
}

开发者ID:ccollins476ad，项目名称:incubator-mynewt-core，代码行数:9，代码来源:nrfx_comp.c

注：本文中的NRFX_LOG_INFO函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NRF_LOG_DEBUG函数代码示例发布时间：2022-05-30

C++ NRF24L01_WriteReg函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18209|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9374|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ NRFX_LOG_INFO函数代码示例

示例1: nrfx_rtc_cc_disable

示例2: nrfx_dppi_channel_alloc

示例3: nrfx_twim_xfer

示例4: nrfx_dppi_group_alloc

示例5: nrfx_uart_tx

示例6: nrfx_rtc_cc_set

示例7: nrfx_adc_buffer_convert

示例8: nrfx_pwm_stop

示例9: nrfx_adc_init

示例10: nrfx_rtc_init

示例11: nrfx_pwm_init

示例12: nrfx_rtc_disable

示例13: nrfx_clock_uninit

示例14: nrfx_qdec_disable

示例15: nrfx_qdec_uninit

示例16: nrfx_uart_rx_abort

示例17: nrfx_rtc_tick_disable

示例18: nrfx_rtc_enable

示例19: nrfx_pwm_complex_playback

示例20: nrfx_comp_stop

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053