C++ PHY_READ函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PHY_READ函数的典型用法代码示例。如果您正苦于以下问题：C++ PHY_READ函数的具体用法？C++ PHY_READ怎么用？C++ PHY_READ使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PHY_READ函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ipgphy_reset

void
ipgphy_reset(struct mii_softc *sc)
{
	struct ifnet *ifp = sc->mii_pdata->mii_ifp;
	struct stge_softc *stge_sc;
	uint32_t reg;

	mii_phy_reset(sc);

	/* clear autoneg/full-duplex as we don't want it after reset */
	reg = PHY_READ(sc, IPGPHY_MII_BMCR);
	reg &= ~(IPGPHY_BMCR_AUTOEN | IPGPHY_BMCR_FDX);
	PHY_WRITE(sc, MII_BMCR, reg);

	if (sc->mii_model == MII_MODEL_ICPLUS_IP1000A &&
	    strcmp(ifp->if_xname, "stge") == 0) {
		stge_sc = ifp->if_softc;
		if (stge_sc->sc_rev >= 0x40 && stge_sc->sc_rev <= 0x4e)
			ipgphy_load_dspcode(sc);
	}
}

开发者ID:SylvestreG，项目名称:bitrig，代码行数:21，代码来源:ipgphy.c

示例2: rgephy_loop

static void
rgephy_loop(struct mii_softc *sc)
{
	int i;

	if (sc->mii_mpd_model != MII_MODEL_REALTEK_RTL8251 &&
	    sc->mii_mpd_rev < 2) {
		PHY_WRITE(sc, RGEPHY_MII_BMCR, RGEPHY_BMCR_PDOWN);
		DELAY(1000);
	}

	for (i = 0; i < 15000; i++) {
		if (!(PHY_READ(sc, RGEPHY_MII_BMSR) & RGEPHY_BMSR_LINK)) {
#if 0
			device_printf(sc->mii_dev, "looped %d\n", i);
#endif
			break;
		}
		DELAY(10);
	}
}

开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:21，代码来源:rgephy.c

示例3: sqphyattach

static void
sqphyattach(device_t parent, device_t self, void *aux)
{
	struct mii_softc *sc = device_private(self);
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;

	mpd = mii_phy_match(ma, sqphys);
	aprint_naive(": Media interface\n");
	aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_dev = self;
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS;

	switch (MII_MODEL(ma->mii_id2)) {
	case MII_MODEL_SEEQ_84220:
		sc->mii_funcs = &sqphy_84220_funcs;
		aprint_normal_dev(self, "using Seeq 84220 isolate/reset hack\n");
		break;

	default:
		sc->mii_funcs = &sqphy_funcs;
	}

	PHY_RESET(sc);

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	aprint_normal_dev(self, "");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		aprint_error("no media present");
	else
		mii_phy_add_media(sc);
	aprint_normal("\n");
}

开发者ID:eyberg，项目名称:rumpkernel-netbsd-src，代码行数:40，代码来源:sqphy.c

示例4: mvphyattach

static void
mvphyattach(device_t parent, device_t self, void *aux)
{
	struct mii_softc *sc = device_private(self);
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;

	mpd = mii_phy_match(ma, mvphys);
	aprint_naive(": Media interface\n");
	aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_dev = self;
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &mvphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS;

	if (MV_PORT(sc) == 0) {		/* NB: only when attaching first PHY */
		/*
		 * Set the global switch settings and configure the
		 * CPU port since it does not probe as a visible PHY.
		 */
		MV_WRITE(sc, MII_MV_SWITCH_GLOBAL_ADDR, MV_ATU_CONTROL,
		      SM(MV_ATUCTRL_AGE_TIME_DEFAULT, MV_ATUCTRL_AGE_TIME)
		    | SM(MV_ATUCTRL_ATU_SIZE_DEFAULT, MV_ATUCTRL_ATU_SIZE));
		mvphy_switchconfig(sc, MV_CPU_PORT);
	}
	PHY_RESET(sc);

	sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	aprint_normal_dev(self, "");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		aprint_error("no media present");
	else
		mii_phy_add_media(sc);
	aprint_normal("\n");
}

开发者ID:ryo，项目名称:netbsd-src，代码行数:40，代码来源:mvphy.c

示例5: tdkphy_attach

static int
tdkphy_attach(device_t dev)
{
	struct mii_softc *sc;
	struct mii_attach_args *ma;
	struct mii_data *mii;
	sc = device_get_softc(dev);
	ma = device_get_ivars(dev);
	sc->mii_dev = device_get_parent(dev);
	mii = device_get_softc(sc->mii_dev);
	LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);

	if (bootverbose)
		device_printf(dev, "OUI 0x%06x, model 0x%04x, rev. %d\n",
		    MII_OUI(ma->mii_id1, ma->mii_id2),
		    MII_MODEL(ma->mii_id2), MII_REV(ma->mii_id2));

	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_service = tdkphy_service;
	sc->mii_pdata = mii;

	mii->mii_instance++;

	/*
	 * Apparently, we can't do loopback on this PHY.
	 */
	sc->mii_flags |= MIIF_NOLOOP;

	mii_phy_reset(sc);

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	device_printf(dev, " ");
	mii_phy_add_media(sc);
	printf("\n");

	MIIBUS_MEDIAINIT(sc->mii_dev);
	return (0);
}

开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:40，代码来源:tdkphy.c

示例6: mii_phy_reset

void
mii_phy_reset(struct mii_softc *sc)
{
	int reg, i;

	if (sc->mii_flags & MIIF_NOISOLATE)
		reg = BMCR_RESET;
	else
		reg = BMCR_RESET | BMCR_ISO;
	PHY_WRITE(sc, MII_BMCR, reg);

	/* Wait 100ms for it to complete. */
	for (i = 0; i < 100; i++) {
		reg = PHY_READ(sc, MII_BMCR); 
		if ((reg & BMCR_RESET) == 0)
			break;
		DELAY(1000);
	}

	if (sc->mii_inst != 0 && ((sc->mii_flags & MIIF_NOISOLATE) == 0))
		PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
}

开发者ID:mariuz，项目名称:haiku，代码行数:22，代码来源:fbsd_mii_physubr.c

示例7: brgphy_mii_phy_auto

static void
brgphy_mii_phy_auto(struct mii_softc *sc)
{
	int ktcr;

	brgphy_reset(sc);

	PHY_WRITE(sc, BRGPHY_MII_ANAR,
	    BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA);
	DELAY(1000);

	ktcr = BRGPHY_1000CTL_AFD|BRGPHY_1000CTL_AHD;
	if (sc->mii_model == MII_MODEL_xxBROADCOM_BCM5701)
		ktcr |= BRGPHY_1000CTL_MSE|BRGPHY_1000CTL_MSC;
	PHY_WRITE(sc, BRGPHY_MII_1000CTL, ktcr);
	ktcr = PHY_READ(sc, BRGPHY_MII_1000CTL);
	DELAY(1000);

	PHY_WRITE(sc, BRGPHY_MII_BMCR,
	    BRGPHY_BMCR_AUTOEN | BRGPHY_BMCR_STARTNEG);
	PHY_WRITE(sc, BRGPHY_MII_IMR, 0xFF00);
}

开发者ID:varialus，项目名称:DragonFlyX，代码行数:22，代码来源:brgphy.c

示例8: acphyattach

void
acphyattach(struct device *parent, struct device *self, void *aux)
{
	struct mii_softc *sc = (struct mii_softc *)self;
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;

	mpd = mii_phy_match(ma, acphys);
	printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &acphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS;

	PHY_RESET(sc);

	/*
	 * XXX Check MCR_FX_SEL to set MIIF_HAVE_FIBER?
	 */

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;

#define	ADD(m, c)	ifmedia_add(&mii->mii_media, (m), (c), NULL)
	if (sc->mii_flags & MIIF_HAVEFIBER) {
		ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_FX, 0, sc->mii_inst),
		    MII_MEDIA_100_TX);
		ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_FX, IFM_FDX, sc->mii_inst),
		    MII_MEDIA_100_TX);
	}
#undef ADD

	if (sc->mii_capabilities & BMSR_MEDIAMASK)
		mii_phy_add_media(sc);
}

开发者ID:ajinkya93，项目名称:OpenBSD，代码行数:39，代码来源:acphy.c

示例9: urlphy_attach

static void
urlphy_attach(device_t parent, device_t self, void *aux)
{
	struct mii_softc *sc = device_private(self);
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;

	aprint_naive(": Media interface\n");
	aprint_normal(": Realtek RTL8150L internal media interface\n");

	DPRINTF(("%s: %s: enter\n", device_xname(self), __func__));

	sc->mii_dev = self;
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &urlphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = mii->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS_GIGE;

	/* Don't do loopback on this PHY. */
	sc->mii_flags |= MIIF_NOLOOP;
	/* Don't do isolate on this PHY. */
	sc->mii_flags |= MIIF_NOISOLATE;

	if (mii->mii_instance != 0) {
		aprint_error_dev(self, "ignoring this PHY, non-zero instance\n");
		return;
	}
	PHY_RESET(sc);

	sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	aprint_normal_dev(self, "");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		aprint_error("no media present");
	else
		mii_phy_add_media(sc);
	aprint_normal("\n");
}

开发者ID:ryoon，项目名称:netbsd-xhci，代码行数:39，代码来源:urlphy.c

示例10: urlphy_attach

void
urlphy_attach(struct device *parent, struct device *self, void *aux)
{
	struct mii_softc *sc = (struct mii_softc *)self;
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;

	printf(": Realtek RTL8150L internal media interface\n");

	DPRINTF(("%s: %s: enter\n", sc->mii_dev.dv_xname, __FUNCTION__));

	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &urlphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = mii->mii_flags;
	sc->mii_anegticks = 10;

	/* Don't do loopback on this PHY. */
	sc->mii_flags |= MIIF_NOLOOP;
	/* Don't do isolate on this PHY. */
	sc->mii_flags |= MIIF_NOISOLATE;

	if (mii->mii_instance != 0) {
		printf("%s: ignoring this PHY, non-zero instance\n",
		       sc->mii_dev.dv_xname);
		return;
	}
	PHY_RESET(sc);

	sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	printf("%s: ", sc->mii_dev.dv_xname);
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		printf("no media present");
	else
		mii_phy_add_media(sc);
	printf("\n");
}

开发者ID:MarginC，项目名称:kame，代码行数:38，代码来源:urlphy.c

示例11: smcphy_reset

static void
smcphy_reset(struct mii_softc *sc)
{
	u_int	bmcr;
	int	timeout;

	PHY_WRITE(sc, MII_BMCR, BMCR_RESET);

	for (timeout = 2; timeout > 0; timeout--) {
		DELAY(50000);
		bmcr = PHY_READ(sc, MII_BMCR);
		if ((bmcr & BMCR_RESET) == 0)
			break;
	}

	if (bmcr & BMCR_RESET)
		device_printf(sc->mii_dev, "reset failed\n");

	PHY_WRITE(sc, MII_BMCR, 0x3000);

	/* Mask interrupts, we poll instead. */
	PHY_WRITE(sc, 0x1e, 0xffc0);
}

开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:23，代码来源:smcphy.c

示例12: nsphy_reset

static void
nsphy_reset(struct mii_softc *sc)
{
	int reg, i;

	if (sc->mii_flags & MIIF_NOISOLATE)
		reg = BMCR_RESET;
	else
		reg = BMCR_RESET | BMCR_ISO;
	PHY_WRITE(sc, MII_BMCR, reg);

	/*
	 * Give it a little time to settle in case we just got power.
	 * The DP83840A data sheet suggests that a soft reset not happen
	 * within 500us of power being applied.  Be conservative.
	 */
	delay(1000);

	/*
	 * Wait another 2s for it to complete.
	 * This is only a little overkill as under normal circumstances
	 * the PHY can take up to 1s to complete reset.
	 * This is also a bit odd because after a reset, the BMCR will
	 * clear the reset bit and simply reports 0 even though the reset
	 * is not yet complete.
	 */
	for (i = 0; i < 1000; i++) {
		reg = PHY_READ(sc, MII_BMCR);
		if (reg && ((reg & BMCR_RESET) == 0))
			break;
		delay(2000);
	}

	if (sc->mii_inst != 0 && ((sc->mii_flags & MIIF_NOISOLATE) == 0)) {
		PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
	}
}

开发者ID:Tommmster，项目名称:netbsd-avr32，代码行数:37，代码来源:nsphy.c

示例13: rlphyattach

void
rlphyattach(device_t parent, device_t self, void *aux)
{
	struct rlphy_softc *rsc = device_private(self);
	struct mii_softc *sc = &rsc->sc_mii;
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;

	aprint_naive("\n");
	if (MII_MODEL(ma->mii_id2) == MII_MODEL_yyREALTEK_RTL8201L) {
		rsc->sc_rtl8201l = 1;
		aprint_normal(": %s, rev. %d\n", MII_STR_yyREALTEK_RTL8201L,
		    MII_REV(ma->mii_id2));
	} else
		aprint_normal(": Realtek internal PHY\n");

	sc->mii_dev = self;
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &rlphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;

	sc->mii_flags |= MIIF_NOISOLATE;

	PHY_RESET(sc);

	aprint_normal_dev(self, "");
	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	if (sc->mii_capabilities & BMSR_MEDIAMASK)
		mii_phy_add_media(sc);
	aprint_normal("\n");

	if (!pmf_device_register(self, NULL, mii_phy_resume))
		aprint_error_dev(self, "couldn't establish power handler\n");
}

开发者ID:Tommmster，项目名称:netbsd-avr32，代码行数:37，代码来源:rlphy.c

示例14: eephy_reset

static void
eephy_reset(struct mii_softc *sc)
{
	u_int32_t reg;
	int i;

	/* initialize custom E1000 registers to magic values */
	reg = PHY_READ(sc, E1000_SCR);
	reg &= ~E1000_SCR_AUTO_X_MODE;
	PHY_WRITE(sc, E1000_SCR, reg);

	/* normal PHY reset */
	/*mii_phy_reset(sc);*/
	reg = PHY_READ(sc, E1000_CR);
	reg |= E1000_CR_RESET;
	PHY_WRITE(sc, E1000_CR, reg);

	for (i = 0; i < 500; i++) {
		DELAY(1);
		reg = PHY_READ(sc, E1000_CR);
		if (!(reg & E1000_CR_RESET))
			break;
	}

	/* set more custom E1000 registers to magic values */
#if defined(OCELOT_G)
	reg = PHY_READ(sc, E1000_LCR);
	reg |= E1000_LCR_LINK;
	PHY_WRITE(sc, E1000_LCR, reg);
#endif

	reg = PHY_READ(sc, E1000_SCR);
	reg |= E1000_SCR_ASSERT_CRS_ON_TX;
	PHY_WRITE(sc, E1000_SCR, reg);

	reg = PHY_READ(sc, E1000_ESCR);
	reg |= E1000_ESCR_TX_CLK_25;
	PHY_WRITE(sc, E1000_ESCR, reg);

	/* even more magic to reset DSP? */
	PHY_WRITE(sc, 29, 0x1d);
	PHY_WRITE(sc, 30, 0xc1);
	PHY_WRITE(sc, 30, 0x00);
}

开发者ID:BarclayII，项目名称:pmon-3amatx，代码行数:44，代码来源:eephy.c

示例15: bmtphyattach

static void
bmtphyattach(device_t parent, device_t self, void *aux)
{
	struct mii_softc *sc = device_private(self);
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;

	mpd = mii_phy_match(ma, bmtphys);
	aprint_naive(": Media interface\n");
	aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_dev = self;
	sc->mii_mpd_model = MII_MODEL(ma->mii_id2);
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &bmtphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS;

	PHY_RESET(sc);

	/*
	 * XXX Check AUX_STS_FX_MODE to set MIIF_HAVE_FIBER?
	 */

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	aprint_normal_dev(self, "");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		aprint_error("no media present");
	else
		mii_phy_add_media(sc);
	aprint_normal("\n");
}

开发者ID:eyberg，项目名称:rumpkernel-netbsd-src，代码行数:36，代码来源:bmtphy.c

示例16: e1000phy_mii_phy_auto

static int
e1000phy_mii_phy_auto(struct mii_softc *sc, int media)
{
    uint16_t reg;

    if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
        reg = PHY_READ(sc, E1000_AR);
        reg &= ~(E1000_AR_PAUSE | E1000_AR_ASM_DIR);
        reg |= E1000_AR_10T | E1000_AR_10T_FD |
               E1000_AR_100TX | E1000_AR_100TX_FD;
        if ((media & IFM_FLOW) != 0 ||
                (sc->mii_flags & MIIF_FORCEPAUSE) != 0)
            reg |= E1000_AR_PAUSE | E1000_AR_ASM_DIR;
        PHY_WRITE(sc, E1000_AR, reg | E1000_AR_SELECTOR_FIELD);
    } else
        PHY_WRITE(sc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X);
    if ((sc->mii_extcapabilities & (EXTSR_1000TFDX | EXTSR_1000THDX)) != 0)
        PHY_WRITE(sc, E1000_1GCR,
                  E1000_1GCR_1000T_FD | E1000_1GCR_1000T);
    PHY_WRITE(sc, E1000_CR,
              E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG);

    return (EJUSTRETURN);
}

开发者ID:edgar-pek，项目名称:PerspicuOS，代码行数:24，代码来源:e1000phy.c

示例17: brgphy_mii_phy_auto

int
brgphy_mii_phy_auto(struct mii_softc *sc)
{
	int anar, ktcr = 0;

	sc->mii_ticks = 0;
	brgphy_loop(sc);
	PHY_RESET(sc);

	ktcr = GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX;
	if ((sc->mii_mpd_oui == MII_OUI_BROADCOM)
	    && (sc->mii_mpd_model == MII_MODEL_BROADCOM_BCM5701))
		ktcr |= GTCR_MAN_MS | GTCR_ADV_MS;
	PHY_WRITE(sc, MII_100T2CR, ktcr);
	ktcr = PHY_READ(sc, MII_100T2CR);
	DELAY(1000);

	if (sc->mii_flags & MIIF_HAVEFIBER) {
		anar = ANAR_X_FD | ANAR_X_HD;
		if (sc->mii_flags & MIIF_DOPAUSE)
			anar |= BRGPHY_SERDES_ANAR_BOTH_PAUSE;
	} else {
		anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA;
		if (sc->mii_flags & MIIF_DOPAUSE)
			anar |= ANAR_FC | ANAR_PAUSE_ASYM;
	}
	PHY_WRITE(sc, MII_ANAR, anar);
	DELAY(1000);

	/* Start autonegotiation */
	PHY_WRITE(sc, MII_BMCR,
	    BMCR_AUTOEN | BMCR_STARTNEG);
	PHY_WRITE(sc, BRGPHY_MII_IMR, 0xFF00);

	return (EJUSTRETURN);
}

开发者ID:eyberg，项目名称:rumpkernel-netbsd-src，代码行数:36，代码来源:brgphy.c

示例18: sqphyattach

void
sqphyattach(struct device *parent, struct device *self, void *aux)
{
	struct mii_softc *sc = (struct mii_softc *)self;
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;

	mpd = mii_phy_match(ma, sqphys);
	printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &sqphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;

	PHY_RESET(sc);

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	if (sc->mii_capabilities & BMSR_MEDIAMASK)
		mii_phy_add_media(sc);
}

开发者ID:SylvestreG，项目名称:bitrig，代码行数:24，代码来源:sqphy.c

示例19: bmtphy_attach

static int
bmtphy_attach(device_t dev)
{
	struct	mii_softc *sc;
	struct	mii_attach_args *ma;
	struct	mii_data *mii;

	sc = device_get_softc(dev);
	ma = device_get_ivars(dev);
	sc->mii_dev = device_get_parent(dev);
	mii = device_get_softc(sc->mii_dev);
	LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);

	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_service = bmtphy_service;
	sc->mii_pdata = mii;

	mii_phy_reset(sc);

	mii->mii_instance++;

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	device_printf(dev, " ");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		printf("no media present");
	else
		mii_phy_add_media(sc);

	printf("\n");

	MIIBUS_MEDIAINIT(sc->mii_dev);

	return (0);
}

开发者ID:luciang，项目名称:haiku，代码行数:36，代码来源:bmtphy.c

示例20: tqphyattach

static void
tqphyattach(device_t parent, device_t self, void *aux)
{
	struct mii_softc *sc = device_private(self);
	struct mii_attach_args *ma = aux;
	struct mii_data *mii = ma->mii_data;
	const struct mii_phydesc *mpd;

	mpd = mii_phy_match(ma, tqphys);
	aprint_naive(": Media interface\n");
	aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));

	sc->mii_dev = self;
	sc->mii_inst = mii->mii_instance;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_funcs = &tqphy_funcs;
	sc->mii_pdata = mii;
	sc->mii_flags = ma->mii_flags;
	sc->mii_anegticks = MII_ANEGTICKS;

	/*
	 * Apparently, we can't do loopback on this PHY.
	 */
	sc->mii_flags |= MIIF_NOLOOP;

	PHY_RESET(sc);

	sc->mii_capabilities =
	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	aprint_normal_dev(self, "");
	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
		aprint_error("no media present");
	else
		mii_phy_add_media(sc);
	aprint_normal("\n");
}

开发者ID:ryoon，项目名称:netbsd-xhci，代码行数:36，代码来源:tqphy.c

注：本文中的PHY_READ函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PHY_RESET函数代码示例发布时间：2022-05-30

C++ PHYS_TO_VM_PAGE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7861|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ PHY_READ函数代码示例

示例1: ipgphy_reset

示例2: rgephy_loop

示例3: sqphyattach

示例4: mvphyattach

示例5: tdkphy_attach

示例6: mii_phy_reset

示例7: brgphy_mii_phy_auto

示例8: acphyattach

示例9: urlphy_attach

示例10: urlphy_attach

示例11: smcphy_reset

示例12: nsphy_reset

示例13: rlphyattach

示例14: eephy_reset

示例15: bmtphyattach

示例16: e1000phy_mii_phy_auto

示例17: brgphy_mii_phy_auto

示例18: sqphyattach

示例19: bmtphy_attach

示例20: tqphyattach

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

颜的笔顺,诠释颜的笔画,聊聊颜的部首

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053