C++ PH_ASSERT_NULL函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PH_ASSERT_NULL函数的典型用法代码示例。如果您正苦于以下问题：C++ PH_ASSERT_NULL函数的具体用法？C++ PH_ASSERT_NULL怎么用？C++ PH_ASSERT_NULL使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PH_ASSERT_NULL函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: phalMfc_Sw_Init

phStatus_t phalMfc_Sw_Init(
                           phalMfc_Sw_DataParams_t * pDataParams,
                           uint16_t wSizeOfDataParams, 
                           void * pPalMifareDataParams,
                           void * pKeyStoreDataParams
                           )
{
    if (sizeof(phalMfc_Sw_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
    }
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pPalMifareDataParams);

    /* init private data */
    pDataParams->wId                    = PH_COMP_AL_MFC | PHAL_MFC_SW_ID;
    pDataParams->pPalMifareDataParams   = pPalMifareDataParams;
    pDataParams->pKeyStoreDataParams    = pKeyStoreDataParams;

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_AL_MFC);
}

开发者ID:VladiPeled，项目名称:NXP-EXPLORE-NFC-CardEmulation，代码行数:21，代码来源:phalMfc_Sw.c

示例2: phnpSnep_Fri_Init

phStatus_t phnpSnep_Fri_Init( phnpSnep_Fri_DataParams_t     *pDataParams,
                              uint16_t                       wSizeOfDataParams,
                              void                          *plnLlcpDataParams
                            )
{
    phlnLlcp_Fri_DataParams_t  *lnLlcpDataparams = (phlnLlcp_Fri_DataParams_t *) plnLlcpDataParams;

    if (sizeof(phnpSnep_Fri_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);
    }

    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (plnLlcpDataParams);

    /* Init. private data */
    pDataParams->wId = PH_COMP_NP_SNEP | PHNP_SNEP_FRI_ID;
    pDataParams->plnLlcpDataParams = plnLlcpDataParams;
    pDataParams->pOsal = lnLlcpDataparams->pLlcp->osal;

    return PH_ERR_SUCCESS;
}

开发者ID:ipskid，项目名称:clev663，代码行数:22，代码来源:phnpSnep_Fri.c

示例3: phalMful_SamAV2_X_Init

phStatus_t phalMful_SamAV2_X_Init(
                                  phalMful_SamAV2_X_DataParams_t * pDataParams,
                                  uint16_t wSizeOfDataParams, 
                                  phhalHw_SamAV2_DataParams_t * pHalSamDataParams,
                                  phpalMifare_SamAV2_X_DataParams_t * pPalMifareDataParams
                                  )
{
    if (sizeof(phalMful_SamAV2_X_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFUL);
    }
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pHalSamDataParams);
	PH_ASSERT_NULL (pPalMifareDataParams);

    /* init private data */
    pDataParams->wId                    = PH_COMP_AL_MFUL | PHAL_MFUL_SAMAV2_X_ID;
    pDataParams->pHalSamDataParams      = pHalSamDataParams;
    pDataParams->pPalMifareDataParams   = pPalMifareDataParams;

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_AL_MFUL);
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:22，代码来源:phalMful_SamAV2_X.c

示例4: phCidManager_FreeCid

phStatus_t phCidManager_FreeCid(
                                void * pDataParams,
                                uint8_t bCid
                                )
{
   phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phCidManager_FreeCid");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bCid);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_INFO, bCid_log, &bCid);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_CIDMANAGER)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_CIDMANAGER);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PH_CIDMANAGER_SW
    case PH_CIDMANAGER_SW_ID:
        status = phCidManager_Sw_FreeCid((phCidManager_Sw_DataParams_t *)pDataParams, bCid);
        break;
#endif /* NXPBUILD__PH_CIDMANAGER_SW */

#ifdef NXPBUILD__PH_CIDMANAGER_RD710
    case PH_CIDMANAGER_RD710_ID:
        status = phCidManager_Rd710_FreeCid((phCidManager_Rd710_DataParams_t *)pDataParams, bCid);
        break;
#endif /* NXPBUILD__PH_CIDMANAGER_RD710 */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_CIDMANAGER);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:51，代码来源:phCidManager.c

示例5: phpalFelica_SetConfig

phStatus_t phpalFelica_SetConfig(
                                 void * pDataParams,
                                 uint16_t wConfig,
                                 uint16_t wValue
                                 )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalFelica_SetConfig");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wConfig);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wValue);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wConfig_log, &wConfig);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wValue_log, &wValue);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_FELICA)
    {
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_FELICA);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_FELICA_SW
    case PHPAL_FELICA_SW_ID:
        status = phpalFelica_Sw_SetConfig((phpalFelica_Sw_DataParams_t *)pDataParams, wConfig, wValue);
        break;
#endif /* NXPBUILD__PHPAL_FELICA_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_FELICA);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:51，代码来源:phpalFelica.c

示例6: phCryptoRng_Seed

phStatus_t phCryptoRng_Seed(  
                                    void * pDataParams,
                                    uint8_t * pSeed,
                                    uint8_t bSeedLength
                                    )
{
    phStatus_t PH_MEMLOC_REM status;

	PH_ASSERT_NULL (pDataParams);
	if (bSeedLength) PH_ASSERT_NULL (pSeed);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_CRYPTORNG)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_CRYPTORNG);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PH_CRYPTORNG_SW
    case PH_CRYPTORNG_SW_ID:
        status = phCryptoRng_Sw_Seed((phCryptoRng_Sw_DataParams_t *)pDataParams,pSeed,bSeedLength);
        break;
#endif /* NXPBUILD__PH_CRYPTORNG_SW */

#ifdef NXPBUILD__PH_CRYPTORNG_STUB
    case PH_CRYPTORNG_STUB_ID:
        status = phCryptoRng_Stub_Seed((phCryptoRng_Stub_DataParams_t *)pDataParams,pSeed,bSeedLength);
        break;
#endif /* NXPBUILD__PH_CRYPTORNG_STUB */
    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_CRYPTORNG);
        break;
    }

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:38，代码来源:phCryptoRng.c

示例7: phpalEpcUid_Sw_Init

phStatus_t phpalEpcUid_Sw_Init(
                               phpalEpcUid_Sw_DataParams_t * pDataParams,
                               uint16_t wSizeOfDataParams,
                               void * pHalDataParams
                               )
{
    /* Dataparam check */
    if (sizeof(phpalEpcUid_Sw_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_EPCUID);
    }

    /* Pointer check */
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pHalDataParams);

    /* init private data */
    pDataParams->wId            = PH_COMP_PAL_EPCUID | PHPAL_EPCUID_SW_ID;
    pDataParams->pHalDataParams = pHalDataParams;
    pDataParams->bUidValid      = PH_OFF;

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_PAL_EPCUID);
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:23，代码来源:phpalEpcUid_Sw.c

示例8: phacDiscLoop_SetPtr

phStatus_t phacDiscLoop_SetPtr(
    void * pDataParams,
    void * pI14443p3a,
    void * pI14443p4a,
    void * pI14443p3b,
    void * pFeilca,
    void * pI18092mPI
    
    )
{
    phStatus_t PH_MEMLOC_REM status;
    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phacDiscLoop_SetPtr");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams); */
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pI14443p3a);
    PH_ASSERT_NULL (pI14443p4a);
    PH_ASSERT_NULL (pI14443p3b);
    PH_ASSERT_NULL (pFeilca);
    PH_ASSERT_NULL (pI18092mPI);
    
    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AC_DISCLOOP)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
    }
    
    switch(PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAC_DISCLOOP_SW
    case PHAC_DISCLOOP_SW_ID:
        status = phacDiscLoop_Sw_SetPtr(pDataParams,
            pI14443p3a,
            pI14443p4a,
            pI14443p3b,
            pFeilca,
            pI18092mPI
            );
        break;
#endif /* NXPBUILD__PHAC_DISCLOOP_SW */
    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        break;
    }
    
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
    return status;    
}

开发者ID:idodoyo，项目名称:nxprdlib，代码行数:57，代码来源:phacDiscLoop.c

示例9: phalMfc_RestoreTransfer

phStatus_t phalMfc_RestoreTransfer(
                                   void * pDataParams,
                                   uint8_t bSrcBlockNo,
                                   uint8_t bDstBlockNo
                                   )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalMfc_RestoreTransfer");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bSrcBlockNo);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bDstBlockNo);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bSrcBlockNo_log, &bSrcBlockNo);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bDstBlockNo_log, &bDstBlockNo);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_MFC)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_MFC_SW
    case PHAL_MFC_SW_ID:
        status = phalMfc_Sw_RestoreTransfer((phalMfc_Sw_DataParams_t *)pDataParams, bSrcBlockNo, bDstBlockNo);
        break;
#endif /* NXPBUILD__PHAL_MFC_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
    
    return status;
}

开发者ID:liddad，项目名称:DoorEntrySystem，代码行数:48，代码来源:phalMfc.c

示例10: phacDiscLoop_SetConfig

phStatus_t phacDiscLoop_SetConfig(
    void * pDataParams,
    uint16_t wConfig,
    uint16_t wValue
    )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phacDiscLoop_SetConfig");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams); */
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wConfig);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wValue);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wConfig_log, &wConfig);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wValue_log, &wValue);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);


    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AC_DISCLOOP)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
    }

    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAC_DISCLOOP_SW
    case PHAC_DISCLOOP_SW_ID:
        status = phacDiscLoop_Sw_SetConfig(pDataParams, wConfig, wValue);
        break;
#endif /* NXPBUILD__PHAC_DISCLOOP_SW */
    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
    return status;
}

开发者ID:idodoyo，项目名称:nxprdlib，代码行数:48，代码来源:phacDiscLoop.c

示例11: phnpSnep_Client_DeInit

/* SNEP Client De-Initialization API */
phStatus_t phnpSnep_Client_DeInit( void           *pDataParams,
                                  ph_NfcHandle    ConnHandle
                                  )
{
    phStatus_t status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phnpSnep_Client_DeInit");
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);

    status =  phnpSnep_Fri_Client_DeInit( (phnpSnep_Fri_DataParams_t *) pDataParams,
                                          ConnHandle
                                         );
    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:17，代码来源:phnpSnep.c

示例12: phnpSnep_Server_DeInit

/* SNEP Server De-Initialization API */
phStatus_t phnpSnep_Server_DeInit ( void           *pDataParams,
                                    ph_NfcHandle    ServerHandle )
{
    phStatus_t status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phnpSnep_Server_DeInit");
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_NP_SNEP)
    {
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHNP_SNEP_FRI
    case PHNP_SNEP_FRI_ID:

    status = phnpSnep_Fri_Server_DeInit( pDataParams,
                                         ServerHandle );

        break;
#endif /* NXPBUILD__PHNP_SNEP_FRI */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:46，代码来源:phnpSnep.c

示例13: phpalI14443p3a_HaltA

phStatus_t phpalI14443p3a_HaltA(
                                void * pDataParams
                                )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalI14443p3a_HaltA");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_ISO14443P3A)
    {
		status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_ISO14443P3A);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_I14443P3A_SW
    case PHPAL_I14443P3A_SW_ID:
        status = phpalI14443p3a_Sw_HaltA((phpalI14443p3a_Sw_DataParams_t *)pDataParams);
        break;
#endif /* NXPBUILD__PHPAL_I14443P3A_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_ISO14443P3A);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:chouyu，项目名称:high-low-frequency-attack-defense-toolkits，代码行数:45，代码来源:phpalI14443p3a.c

示例14: phalSli_LockPWD

phStatus_t phalSli_LockPWD(
                           void * pDataParams,
                           uint8_t bPwdIdentifier
                           )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalSli_LockPWD");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bPwdIdentifier);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bPwdIdentifier_log, &bPwdIdentifier);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_SLI)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_SLI);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_SLI_SW
    case PHAL_SLI_SW_ID:
        status = phalSli_Sw_LockPWD((phalSli_Sw_DataParams_t *)pDataParams, bPwdIdentifier);
        break;
#endif /* NXPBUILD__PHAL_SLI_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_SLI);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:44，代码来源:phalSli.c

示例15: phpalMifare_Stub_Init

phStatus_t phpalMifare_Stub_Init(
                                 phpalMifare_Stub_DataParams_t * pDataParams,
                                 uint16_t wSizeOfDataParams
                                 )
{
    if (sizeof(phpalMifare_Stub_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_MIFARE);
    }
	PH_ASSERT_NULL (pDataParams);

    /* init private data */
    pDataParams->wId                 = PH_COMP_PAL_MIFARE | PHPAL_MIFARE_STUB_ID;

    /* TODO: Replace and insert initialisation code here */
    pDataParams = NULL;

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_PAL_MIFARE);
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:19，代码来源:phpalMifare_Stub.c

示例16: phhalHw_Callback_Init

phStatus_t phhalHw_Callback_Init(
                                 phhalHw_Callback_DataParams_t * pDataParams,
                                 uint16_t wSizeOfDataParams,
                                 cbExchange pExchangeCb,
                                 cbWriteRegister pWriteRegisterCb,
                                 cbReadRegister pReadRegisterCb,
                                 cbApplyProtocolSettings pApplyProtocolSettingsCb,
                                 cbMfcAuthenticate pMfcAuthenticateCb,
                                 cbMfcAuthenticateKey pMfcAuthenticateKeyCb,
                                 cbSetConfig pSetConfigCb,
                                 cbGetConfig pGetConfigCb,
                                 cbFieldOn pFieldOnCb,
                                 cbFieldOff pFieldOffCb,
                                 cbFieldReset pFieldResetCb,
                                 cbWait pWaitCb,
                                 cbListen pListenCb,
                                 void * pCallbackContext
                                 )
{
    if (sizeof(phhalHw_Callback_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_HAL);
    }
	PH_ASSERT_NULL (pDataParams);

    pDataParams->wId                = PH_COMP_HAL | PHHAL_HW_CALLBACK_ID;
    pDataParams->pExchangeCb        = pExchangeCb;
    pDataParams->pWriteRegisterCb   = pWriteRegisterCb;
    pDataParams->pReadRegisterCb    = pReadRegisterCb;
    pDataParams->pApplyProtocolSettingsCb = pApplyProtocolSettingsCb;
    pDataParams->pMfcAuthenticateCb = pMfcAuthenticateCb;
    pDataParams->pMfcAuthenticateKeyCb = pMfcAuthenticateKeyCb;
    pDataParams->pSetConfigCb       = pSetConfigCb;
    pDataParams->pGetConfigCb       = pGetConfigCb;
    pDataParams->pFieldOnCb         = pFieldOnCb;
    pDataParams->pFieldOffCb        = pFieldOffCb;
    pDataParams->pFieldResetCb      = pFieldResetCb;
    pDataParams->pWaitCb            = pWaitCb;
    pDataParams->pCbContext         = pCallbackContext;
    pDataParams->pListenCb          = pListenCb; 

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_HAL);
}

开发者ID:ipskid，项目名称:clev663，代码行数:43，代码来源:phhalHw_Callback.c

示例17: phalTop_FormatNdef

phStatus_t phalTop_FormatNdef(
                              void * pDataParams
                              )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalTop_FormatNdef");
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_TOP)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_TOP);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_TOP);
    }

    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_TOP_SW
    case PHAL_TOP_SW_ID:
        status = phalTop_Sw_FormatNdef(pDataParams);
        break;
#endif /* NXPBUILD__PHAL_TOP_SW */
    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_TOP);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:40，代码来源:phalTop.c

示例18: phalVca_Sw_Init

phStatus_t phalVca_Sw_Init(
                           phalVca_Sw_DataParams_t * pDataParams,
                           uint16_t wSizeOfDataParams, 
                           void * pPalMifareDataParams,
                           void * pKeyStoreDataParams,
                           void * pCryptoDataParams,
                           void * pCryptoRngDataParams,
                           phalVca_Sw_IidTableEntry_t * pIidTableStorage,
                           uint16_t wNumIidTableStorageEntries,
                           phalVca_Sw_CardTableEntry_t * pCardTableStorage,
                           uint16_t wNumCardTableStorageEntries
                           )
{
    if (sizeof(phalVca_Sw_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_VCA);
    }
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pPalMifareDataParams);
	PH_ASSERT_NULL (pKeyStoreDataParams);
	PH_ASSERT_NULL (pCryptoDataParams);
	PH_ASSERT_NULL (pCryptoRngDataParams);
	if (wNumIidTableStorageEntries) PH_ASSERT_NULL (pIidTableStorage);
	if (wNumCardTableStorageEntries) PH_ASSERT_NULL (pCardTableStorage);

    /* init private data */
    pDataParams->wId                    = PH_COMP_AL_VCA | PHAL_VCA_SW_ID;
    pDataParams->pPalMifareDataParams   = pPalMifareDataParams;
    pDataParams->pKeyStoreDataParams    = pKeyStoreDataParams;
    pDataParams->pCryptoDataParams      = pCryptoDataParams;
    pDataParams->wCurrentCardTablePos   = 0;
    pDataParams->pCardTable             = pCardTableStorage;
    pDataParams->wNumCardTableEntries   = wNumCardTableStorageEntries;
    pDataParams->pIidTable              = pIidTableStorage;
    pDataParams->wCurrentIidTablePos    = 0;
    pDataParams->wNumIidTableEntries    = wNumIidTableStorageEntries;
    pDataParams->pCryptoRngDataParams   = pCryptoRngDataParams;

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_AL_VCA);
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:40，代码来源:phalVca_Sw.c

示例19: phacDiscLoop_Start

phStatus_t phacDiscLoop_Start(void * pDataParams)
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phacDiscLoop_Start");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
	
    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AC_DISCLOOP)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
    }

    /* Select the active layer to perform the action */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAC_DISCLOOP_SW
        case PHAC_DISCLOOP_SW_ID:
            status = phacDiscLoop_Sw_Start(pDataParams);
            break;
#endif /* NXPBUILD__PHAC_DISCLOOP_SW */
        default:
            status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
            break;
    }
    return status;
}

开发者ID:idodoyo，项目名称:nxprdlib，代码行数:36，代码来源:phacDiscLoop.c

示例20: phalVca_SamAV2_Init

phStatus_t phalVca_SamAV2_Init(
                               phalVca_SamAV2_DataParams_t * pDataParams,  
                               uint16_t wSizeOfDataParams, 
                               phhalHw_SamAV2_DataParams_t * pSamHal,     
                               void * pPalMifareDataParams,
                               uint8_t * pRndq,
                               phalVca_SamAV2_KeyDuos_t * pKeyDuos,
                               uint8_t bNumKeyDuos,
                               phalVca_SamAV2_CardTableEntry_t * pCardTableStorage,
                               uint16_t wNumCardTableStorageEntries
                               )
{
    if (sizeof(phalVca_SamAV2_DataParams_t) != wSizeOfDataParams)
    {
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_VCA);
    }
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pPalMifareDataParams);
	PH_ASSERT_NULL (pSamHal);
	PH_ASSERT_NULL (pRndq);
	PH_ASSERT_NULL (pKeyDuos);
	if (wNumCardTableStorageEntries) PH_ASSERT_NULL (pCardTableStorage);

    /* init private data */
    pDataParams->wId                    = PH_COMP_AL_VCA | PHAL_VCA_SAMAV2_ID;
    pDataParams->pPalMifareDataParams   = pPalMifareDataParams;
    pDataParams->pSamHal                = pSamHal;
    pDataParams->pRndq                  = pRndq;
    pDataParams->pKeyDuos               = pKeyDuos;
    pDataParams->bNumKeyDuos            = bNumKeyDuos;
    pDataParams->wCurrentCardTablePos   = 0;
    pDataParams->pCardTable             = pCardTableStorage;
    pDataParams->wNumCardTableEntries   = wNumCardTableStorageEntries;

    return PH_ADD_COMPCODE(PH_ERR_SUCCESS, PH_COMP_AL_VCA);
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:36，代码来源:phalVca_SamAV2.c

注：本文中的PH_ASSERT_NULL函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PH_CHECK_SUCCESS_FCT函数代码示例发布时间：2022-05-30

C++ PH_ADD_COMPCODE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18239|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9667|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9383|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7858|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ PH_ASSERT_NULL函数代码示例

示例1: phalMfc_Sw_Init

示例2: phnpSnep_Fri_Init

示例3: phalMful_SamAV2_X_Init

示例4: phCidManager_FreeCid

示例5: phpalFelica_SetConfig

示例6: phCryptoRng_Seed

示例7: phpalEpcUid_Sw_Init

示例8: phacDiscLoop_SetPtr

示例9: phalMfc_RestoreTransfer

示例10: phacDiscLoop_SetConfig

示例11: phnpSnep_Client_DeInit

示例12: phnpSnep_Server_DeInit

示例13: phpalI14443p3a_HaltA

示例14: phalSli_LockPWD

示例15: phpalMifare_Stub_Init

示例16: phhalHw_Callback_Init

示例17: phalTop_FormatNdef

示例18: phalVca_Sw_Init

示例19: phacDiscLoop_Start

示例20: phalVca_SamAV2_Init

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

CVE-2022-36900

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053