本文整理汇总了C++中bytesChanged函数的典型用法代码示例。如果您正苦于以下问题:C++ bytesChanged函数的具体用法?C++ bytesChanged怎么用?C++ bytesChanged使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了bytesChanged函数的18个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: mempoolSizeChanged
void ClientModel::updateTimer()
{
// no locking required at this point
// the following calls will acquire the required lock
Q_EMIT mempoolSizeChanged(m_node.getMempoolSize(), m_node.getMempoolDynamicUsage());
Q_EMIT bytesChanged(m_node.getTotalBytesRecv(), m_node.getTotalBytesSent());
}
开发者ID:Chovanec,项目名称:bitcoin,代码行数:7,代码来源:clientmodel.cpp
示例2: TRY_LOCK
void ClientModel::updateTimer()
{
// Get required lock upfront. This avoids the GUI from getting stuck on
// periodical polls if the core is holding the locks for a longer time -
// for example, during a wallet rescan.
TRY_LOCK(cs_main, lockMain);
if(!lockMain)
return;
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
// check for changed number of blocks we have, number of blocks peers claim to have, reindexing state and importing state
if (cachedNumBlocks != newNumBlocks ||
cachedReindexing != fReindex || cachedImporting != fImporting)
{
cachedNumBlocks = newNumBlocks;
cachedReindexing = fReindex;
cachedImporting = fImporting;
emit numBlocksChanged(newNumBlocks);
}
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:KendrickBitz,项目名称:cryptotarget,代码行数:25,代码来源:clientmodel.cpp
示例3: getNumBlocks
void ClientModel::updateTimer()
{
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
int newNumHeaders = getNumHeaders();
int totalMissing = getTotalMissing();
int trieComplete = getTrieComplete();
//printf("Tick\n");
// check for changed number of blocks we have, number of blocks peers claim to have, reindexing state and importing state
if (cachedNumBlocks != newNumBlocks || cachedNumHeaders != newNumHeaders ||
cachedReindexing != fReindex || cachedImporting != fImporting || cachedTrieOnline != fTrieOnline ||
cachedTotalMissing != totalMissing || cachedTrieComplete != trieComplete || cachedValidating != fValidating ||
cachedProgress != nProgress)
{
cachedNumBlocks = newNumBlocks;
cachedNumHeaders = newNumHeaders;
cachedTotalMissing = totalMissing;
cachedReindexing = fReindex;
cachedImporting = fImporting;
cachedTrieOnline = fTrieOnline;
cachedTrieComplete = trieComplete;
cachedValidating = fValidating;
cachedProgress = nProgress;
// ensure we return the maximum of newNumBlocksTotal and newNumBlocks to not create weird displays in the GUI
emit numBlocksChanged(newNumBlocks, newNumHeaders);
}
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:JacobBruce,项目名称:Cryptonite,代码行数:33,代码来源:clientmodel.cpp
示例4: connect
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if(model)
{
// Subscribe to information, replies, messages, errors
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks());
connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
setNumConnections(model->getNumConnections());
ui->isTestNet->setChecked(model->isTestNet());
}
}
开发者ID:BoodleKing,项目名称:Boodle,代码行数:25,代码来源:rpcconsole.cpp
示例5: setNumConnections
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if(model)
{
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks());
connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
ui->networkName->setText(model->getNetworkName());
}
}
开发者ID:Stennsan,项目名称:ziftrcoin,代码行数:25,代码来源:rpcconsole.cpp
示例6: TRY_LOCK
void ClientModel::updateTimer()
{
// Get required lock upfront. This avoids the GUI from getting stuck on
// periodical polls if the core is holding the locks for a longer time -
// for example, during a wallet rescan.
TRY_LOCK(cs_main, lockMain);
if(!lockMain)
return;
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
int newNumBlocksOfPeers = getNumBlocksOfPeers();
if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
{
cachedNumBlocks = newNumBlocks;
cachedNumBlocksOfPeers = newNumBlocksOfPeers;
emit numBlocksChanged(newNumBlocks, newNumBlocksOfPeers);
}
if (GetArg("-suppressnetworkgraph", "false") != "true")
{
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
}
开发者ID:Erkan-Yilmaz,项目名称:Gridcoin-Research,代码行数:26,代码来源:clientmodel.cpp
示例7: bytesChanged
void TelegramFileLocation::setBytes(const QByteArray &bytes)
{
if(p->bytes == bytes)
return;
p->bytes = bytes;
Q_EMIT bytesChanged();
}
开发者ID:Aseman-Land,项目名称:TelegramQML,代码行数:8,代码来源:telegramfilelocation.cpp
示例8: bytesChanged
void MessageContainerBase::setBytes(const QByteArray& bytes) {
if(!this->isValidFormat(bytes)) {
return;
}
emit bytesChanged(this->bytesBuffer);
emit textChanged(this->textBlock);
}
开发者ID:sassman,项目名称:stegano.kde4,代码行数:9,代码来源:messagecontainer.cpp
示例9: setNumConnections
void RPCConsole::setClientModel(ClientModel* model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if (model) {
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks());
connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));
setMasternodeCount(model->getMasternodeCountString());
connect(model, SIGNAL(strMasternodesChanged(QString)), this, SLOT(setMasternodeCount(QString)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64, quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// set up peer table
ui->peerWidget->setModel(model->getPeerTableModel());
ui->peerWidget->verticalHeader()->hide();
ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
// connect the peerWidget selection model to our peerSelected() handler
connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection&, const QItemSelection&)),
this, SLOT(peerSelected(const QItemSelection&, const QItemSelection&)));
connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
ui->networkName->setText(QString::fromStdString(Params().NetworkIDString()));
//Setup autocomplete and attach it
QStringList wordList;
std::vector<std::string> commandList = tableRPC.listCommands();
for (size_t i = 0; i < commandList.size(); ++i)
{
wordList << commandList[i].c_str();
}
autoCompleter = new QCompleter(wordList, this);
ui->lineEdit->setCompleter(autoCompleter);
// clear the lineEdit after activating from QCompleter
autoCompleter->popup()->installEventFilter(this);
}
}
开发者ID:nashanas,项目名称:ColossusCoinXT,代码行数:55,代码来源:rpcconsole.cpp
示例10: setNumConnections
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if(model)
{
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks(), model->getLastBlockDate());
connect(model, SIGNAL(numBlocksChanged(int,QDateTime)), this, SLOT(setNumBlocks(int,QDateTime)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// set up peer table
ui->peerWidget->setModel(model->getPeerTableModel());
ui->peerWidget->verticalHeader()->hide();
ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
// create context menu actions
QAction* disconnectAction = new QAction(tr("&Disconnect Node"), this);
// create context menu
contextMenu = new QMenu();
contextMenu->addAction(disconnectAction);
// context menu signals
connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showMenu(const QPoint&)));
connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));
// connect the peerWidget selection model to our peerSelected() handler
connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientUserAgent->setText(model->formatSubVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
ui->networkName->setText(QString::fromStdString(Params().NetworkIDString()));
}
}
开发者ID:recalibrate,项目名称:bitcoin,代码行数:52,代码来源:rpcconsole.cpp
示例11: getNumBlocks
void ClientModel::updateTimer()
{
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
int newNumBlocksOfPeers = getNumBlocksOfPeers();
if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
{
cachedNumBlocks = newNumBlocks;
cachedNumBlocksOfPeers = newNumBlocksOfPeers;
emit numBlocksChanged(newNumBlocks, newNumBlocksOfPeers);
}
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:sppl,项目名称:iti,代码行数:17,代码来源:clientmodel.cpp
示例12: getNumBlocks
void ClientModel::updateTimer()
{
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
int newNumBlocksOfPeers = getNumBlocksOfPeers();
if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
{
cachedNumBlocks = newNumBlocks;
cachedNumBlocksOfPeers = newNumBlocksOfPeers;
// ensure we return the maximum of newNumBlocksOfPeers and newNumBlocks to not create weird displays in the GUI
emit numBlocksChanged(newNumBlocks, std::max(newNumBlocksOfPeers, newNumBlocks));
}
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:lightsplasher,项目名称:Truckcoin,代码行数:18,代码来源:clientmodel.cpp
示例13: setNumConnections
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if(model)
{
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks());
connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));
setMasternodeCount(model->getMasternodeCountString());
connect(model, SIGNAL(strMasternodesChanged(QString)), this, SLOT(setMasternodeCount(QString)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// set up peer table
ui->peerWidget->setModel(model->getPeerTableModel());
ui->peerWidget->verticalHeader()->hide();
ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
// connect the peerWidget selection model to our peerSelected() handler
connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
ui->networkName->setText(QString::fromStdString(Params().NetworkIDString()));
}
}
开发者ID:bagcoin,项目名称:bagcoin,代码行数:43,代码来源:rpcconsole.cpp
示例14: setNumConnections
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if(model)
{
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks());
connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// set up peer table
ui->peerWidget->setModel(model->getPeerTableModel());
ui->peerWidget->verticalHeader()->hide();
ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
columnResizingFixer = new GUIUtil::TableViewLastColumnResizingFixer(ui->peerWidget, MINIMUM_COLUMN_WIDTH, MINIMUM_COLUMN_WIDTH);
// connect the peerWidget's selection model to our peerSelected() handler
QItemSelectionModel *peerSelectModel = ui->peerWidget->selectionModel();
connect(peerSelectModel, SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
ui->networkName->setText(model->getNetworkName());
}
}
开发者ID:KryptonDon,项目名称:bitcoin,代码行数:40,代码来源:rpcconsole.cpp
示例15: getNumBlocks
void ClientModel::updateTimer()
{
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
int newNumBlocksOfPeers = getNumBlocksOfPeers();
// check for changed number of blocks we have, number of blocks peers claim to have, reindexing state and importing state
if (cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers ||
cachedReindexing != fReindex || cachedImporting != fImporting)
{
cachedNumBlocks = newNumBlocks;
cachedNumBlocksOfPeers = newNumBlocksOfPeers;
cachedReindexing = fReindex;
cachedImporting = fImporting;
// ensure we return the maximum of newNumBlocksOfPeers and newNumBlocks to not create weird displays in the GUI
emit numBlocksChanged(newNumBlocks, std::max(newNumBlocksOfPeers, newNumBlocks));
}
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:csbitcoin,项目名称:sidecoin,代码行数:22,代码来源:clientmodel.cpp
示例16: TRY_LOCK
void ClientModel::updateTimer()
{
// Get required lock upfront. This avoids the GUI from getting stuck on
// periodical polls if the core is holding the locks for a longer time -
// for example, during a wallet rescan.
TRY_LOCK(cs_main, lockMain);
if(!lockMain)
return;
// Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
// Periodically check and update with a timer.
int newNumBlocks = getNumBlocks();
int newNumBlocksOfPeers = getNumBlocksOfPeers();
if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
{
cachedNumBlocks = newNumBlocks;
cachedNumBlocksOfPeers = newNumBlocksOfPeers;
// ensure we return the maximum of newNumBlocksOfPeers and newNumBlocks to not create weird displays in the GUI
emit numBlocksChanged(newNumBlocks, std::max(newNumBlocksOfPeers, newNumBlocks));
}
emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:ChemCoin,项目名称:Chemcoin,代码行数:24,代码来源:clientmodel.cpp
示例17: setNumConnections
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if (model && clientModel->getPeerTableModel() && clientModel->getBanTableModel()) {
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks(), model->getLastBlockDate());
connect(model, SIGNAL(numBlocksChanged(int,QDateTime)), this, SLOT(setNumBlocks(int,QDateTime)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
// set up peer table
ui->peerWidget->setModel(model->getPeerTableModel());
ui->peerWidget->verticalHeader()->hide();
ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
ui->peerWidget->horizontalHeader()->setStretchLastSection(true);
// create peer table context menu actions
QAction* disconnectAction = new QAction(tr("&Disconnect Node"), this);
QAction* banAction1h = new QAction(tr("Ban Node for") + " " + tr("1 &hour"), this);
QAction* banAction24h = new QAction(tr("Ban Node for") + " " + tr("1 &day"), this);
QAction* banAction7d = new QAction(tr("Ban Node for") + " " + tr("1 &week"), this);
QAction* banAction365d = new QAction(tr("Ban Node for") + " " + tr("1 &year"), this);
// create peer table context menu
peersTableContextMenu = new QMenu();
peersTableContextMenu->addAction(disconnectAction);
peersTableContextMenu->addAction(banAction1h);
peersTableContextMenu->addAction(banAction24h);
peersTableContextMenu->addAction(banAction7d);
peersTableContextMenu->addAction(banAction365d);
// Add a signal mapping to allow dynamic context menu arguments.
// We need to use int (instead of int64_t), because signal mapper only supports
// int or objects, which is okay because max bantime (1 year) is < int_max.
QSignalMapper* signalMapper = new QSignalMapper(this);
signalMapper->setMapping(banAction1h, 60*60);
signalMapper->setMapping(banAction24h, 60*60*24);
signalMapper->setMapping(banAction7d, 60*60*24*7);
signalMapper->setMapping(banAction365d, 60*60*24*365);
connect(banAction1h, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(banAction24h, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(banAction7d, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(banAction365d, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(banSelectedNode(int)));
// peer table context menu signals
connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showPeersTableContextMenu(const QPoint&)));
connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));
// peer table signal handling - update peer details when selecting new node
connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
// peer table signal handling - update peer details when new nodes are added to the model
connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
// set up ban table
ui->banlistWidget->setModel(model->getBanTableModel());
ui->banlistWidget->verticalHeader()->hide();
ui->banlistWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->banlistWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->banlistWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->banlistWidget->setContextMenuPolicy(Qt::CustomContextMenu);
ui->banlistWidget->setColumnWidth(BanTableModel::Address, BANSUBNET_COLUMN_WIDTH);
ui->banlistWidget->setColumnWidth(BanTableModel::Bantime, BANTIME_COLUMN_WIDTH);
ui->banlistWidget->horizontalHeader()->setStretchLastSection(true);
// create ban table context menu action
QAction* unbanAction = new QAction(tr("&Unban Node"), this);
// create ban table context menu
banTableContextMenu = new QMenu();
banTableContextMenu->addAction(unbanAction);
// ban table context menu signals
connect(ui->banlistWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showBanTableContextMenu(const QPoint&)));
connect(unbanAction, SIGNAL(triggered()), this, SLOT(unbanSelectedNode()));
// ban table signal handling - clear peer details when clicking a peer in the ban table
connect(ui->banlistWidget, SIGNAL(clicked(const QModelIndex&)), this, SLOT(clearSelectedNode()));
// ban table signal handling - ensure ban table is shown or hidden (if empty)
connect(model->getBanTableModel(), SIGNAL(layoutChanged()), this, SLOT(showOrHideBanTableIfRequired()));
showOrHideBanTableIfRequired();
// Provide initial values
ui->clientVersion->setText(model->formatFullVersion());
ui->clientUserAgent->setText(model->formatSubVersion());
ui->clientName->setText(model->clientName());
ui->buildDate->setText(model->formatBuildDate());
ui->startupTime->setText(model->formatClientStartupTime());
//.........这里部分代码省略.........
开发者ID:josephbisch,项目名称:namecoin-core-1,代码行数:101,代码来源:rpcconsole.cpp
示例18: setNumConnections
void RPCConsole::setClientModel(ClientModel *model)
{
clientModel = model;
ui->trafficGraph->setClientModel(model);
if (model && clientModel->getPeerTableModel() && clientModel->getBanTableModel()) {
// Keep up to date with client
setNumConnections(model->getNumConnections());
connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));
setNumBlocks(model->getNumBlocks(), model->getLastBlockDate(), model->getVerificationProgress(nullptr), false);
connect(model, SIGNAL(numBlocksChanged(int,QDateTime,double,bool)), this, SLOT(setNumBlocks(int,QDateTime,double,bool)));
updateNetworkState();
connect(model, SIGNAL(networkActiveChanged(bool)), this, SLOT(setNetworkActive(bool)));
updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));
connect(model, SIGNAL(mempoolSizeChanged(long,size_t)), this, SLOT(setMempoolSize(long,size_t)));
// set up peer table
ui->peerWidget->setModel(model->getPeerTableModel());
ui->peerWidget->verticalHeader()->hide();
ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->peerWidget->setSelectionMode(QAbstractItemView::ExtendedSelection);
ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
ui->peerWidget->horizontalHeader()->setStretchLastSection(true);
// create peer table context menu actions
QAction* disconnectAction = new QAction(tr("&Disconnect"), this);
QAction* banAction1h = new QAction(tr("Ban for") + " " + tr("1 &hour"), this);
QAction* banAction24h = new QAction(tr("Ban for") + " " + tr("1 &day"), this);
QAction* banAction7d = new QAction(tr("Ban for") + " " + tr("1 &week"), this);
QAction* banAction365d = new QAction(tr("Ban for") + " " + tr("1 &year"), this);
// create peer table context menu
peersTableContextMenu = new QMenu(this);
peersTableContextMenu->addAction(disconnectAction);
peersTableContextMenu->addAction(banAction1h);
peersTableContextMenu->addAction(banAction24h);
peersTableContextMenu->addAction(banAction7d);
peersTableContextMenu->addAction(banAction365d);
// Add a signal mapping to allow dynamic context menu arguments.
// We need to use int (instead of int64_t), because signal mapper only supports
// int or objects, which is okay because max bantime (1 year) is < int_max.
QSignalMapper* signalMapper = new QSignalMapper(this);
signalMapper->setMapping(banAction1h, 60*60);
signalMapper->setMapping(banAction24h, 60*60*24);
signalMapper->setMapping(banAction7d, 60*60*24*7);
signalMapper->setMapping(banAction365d, 60*60*24*365);
connect(banAction1h, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(banAction24h, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(banAction7d, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(banAction365d, SIGNAL(triggered()), signalMapper, SLOT(map()));
connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(banSelectedNode(int)));
// peer table context menu signals
connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showPeersTableContextMenu(const QPoint&)));
connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));
// peer table signal handling - update peer details when selecting new node
connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
// peer table signal handling - update peer details when new nodes are added to the model
connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
// peer table signal handling - cache selected node ids
connect(model->getPeerTableModel(), SIGNAL(layoutAboutToBeChanged()), this, SLOT(peerLayoutAboutToChange()));
// set up ban table
ui->banlistWidget->setModel(model->getBanTableModel());
ui->banlistWidget->verticalHeader()->hide();
ui->banlistWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
ui->banlistWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
ui->banlistWidget->setSelectionMode(QAbstractItemView::SingleSelection);
ui->banlistWidget->setContextMenuPolicy(Qt::CustomContextMenu);
ui->banlistWidget->setColumnWidth(BanTableModel::Address, BANSUBNET_COLUMN_WIDTH);
ui->banlistWidget->setColumnWidth(BanTableModel::Bantime, BANTIME_COLUMN_WIDTH);
ui->banlistWidget->horizontalHeader()->setStretchLastSection(true);
// create ban table context menu action
QAction* unbanAction = new QAction(tr("&Unban"), this);
// create ban table context menu
banTableContextMenu = new QMenu(this);
banTableContextMenu->addAction(unbanAction);
// ban table context menu signals
connect(ui->banlistWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showBanTableContextMenu(const QPoint&)));
connect(unbanAction, SIGNAL(triggered()), this, SLOT(unbanSelectedNode()));
// ban table signal handling - clear peer details when clicking a peer in the ban table
connect(ui->banlistWidget, SIGNAL(clicked(const QModelIndex&)), this, SLOT(clearSelectedNode()));
// ban table signal handling - ensure ban table is shown or hidden (if empty)
connect(model->getBanTableModel(), SIGNAL(layoutChanged()), this, SLOT(showOrHideBanTableIfRequired()));
showOrHideBanTableIfRequired();
//.........这里部分代码省略.........
开发者ID:AmesianX,项目名称:bitcoin,代码行数:101,代码来源:rpcconsole.cpp
注:本文中的bytesChanged函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论