本文整理汇总了C++中chVTResetI函数的典型用法代码示例。如果您正苦于以下问题:C++ chVTResetI函数的具体用法?C++ chVTResetI怎么用?C++ chVTResetI使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了chVTResetI函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: vMBMasterPortTimersDisable
void vMBMasterPortTimersDisable()
{
palClearPad(GPIOC, GPIOC_PIN9);
//palClearPad(GPIOC, GPIOC_PIN10);
chSysLockFromISR();
chVTResetI(&vt35);
chVTResetI(&vtdelay);
chVTResetI(&vtout);
chSysUnlockFromISR();
}
开发者ID:MultiCalorNV,项目名称:ChibiOS,代码行数:10,代码来源:porttimer_m.c
示例2: i2c_lld_master_transmit_timeout
/**
* @brief Master transmission.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] addr slave device address (7 bits) without R/W bit
* @param[in] txbuf transmit data buffer pointer
* @param[in] txbytes number of bytes to be transmitted
* @param[out] rxbuf receive data buffer pointer
* @param[in] rxbytes number of bytes to be received
* @param[in] timeout the number of ticks before the operation timeouts,
* the following special values are allowed:
* - @a TIME_INFINITE no timeout.
* .
*
* @notapi
*/
msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
const uint8_t *txbuf, size_t txbytes,
uint8_t *rxbuf, const uint8_t rxbytes,
systime_t timeout) {
VirtualTimer vt;
/* Global timeout for the whole operation.*/
if (timeout != TIME_INFINITE)
chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
i2cp->addr = addr;
i2cp->txbuf = txbuf;
i2cp->txbytes = txbytes;
i2cp->txidx = 0;
i2cp->rxbuf = rxbuf;
i2cp->rxbytes = rxbytes;
i2cp->rxidx = 0;
bscdevice_t *device = i2cp->device;
device->slaveAddress = addr;
device->dataLength = txbytes;
device->status = CLEAR_STATUS;
/* Enable Interrupts and start transfer.*/
device->control |= (BSC_INTT | BSC_INTD | START_WRITE);
/* Is this really needed? there is an outer lock already */
chSysLock();
i2cp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
chVTResetI(&vt);
chSysUnlock();
msg_t status = chThdSelf()->p_u.rdymsg;
if (status == RDY_OK && rxbytes > 0) {
/* The TIMEOUT_INFINITE prevents receive from setting up it's own timer.*/
status = i2c_lld_master_receive_timeout(i2cp, addr, rxbuf,
rxbytes, TIME_INFINITE);
if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
chVTResetI(&vt);
}
return status;
}
开发者ID:jesshack10,项目名称:iotwebmanager,代码行数:64,代码来源:i2c_lld.c
示例3: SensorReadStop
/**
* @brief Stops the interrupts and timers so sensors will stop
* beeing serviced. The queued sensor reads are lost as
* well.
*
* @param[in] srdp Pointer to the SensorReadDriver object.
*
* @return The operation status.
* @retval MSG_OK The disabling of interrupts and starting of the
* virtual timers was successful.
* @retval MSG_RESET The driver was not in the correct state.
*
* @api
*/
msg_t SensorReadStop(SensorReadDriver *srdp)
{
size_t i;
chDbgCheck(srdp != NULL);
if (srdp->state == SRD_STARTED)
{
osalSysLock();
/* Disable interrupts for interrupt driven sensors */
for (i = 0; i < srdp->interrupt_sensor_cnt; i++)
extChannelDisableI(&SRD_EXT_DRIVER,
srdp->interrupt_sensor_ptr[i].interrupt_channel);
/* Reset timers for polled driven sensors */
for (i = 0; i < srdp->polled_sensor_cnt; i++)
chVTResetI(srdp->polled_sensor_ptr[i].polling_vt);
osalSysUnlock();
/* Reset the mailbox */
chMBReset(&srdp->srd_mailbox);
/* Everything OK, transverse the state */
srdp->state = SRD_STOPPED;
return MSG_OK;
}
else
return MSG_RESET;
}
开发者ID:korken89,项目名称:EmbeddedGenericSensor,代码行数:46,代码来源:sensor_read.c
示例4: PinSet
void App_t::LedBlink(uint32_t Duration_ms) {
PinSet(LED_GPIO, LED_PIN);
chSysLock()
if(chVTIsArmedI(&TmrLed)) chVTResetI(&TmrLed);
chVTSetI(&TmrLed, MS2ST(Duration_ms), LedTmrCallback, nullptr);
chSysUnlock();
}
开发者ID:Kreyl,项目名称:nute,代码行数:7,代码来源:main.cpp
示例5: spi_thread
static msg_t spi_thread(void *p) {
unsigned i;
SPIDriver *spip = (SPIDriver *)p;
VirtualTimer vt;
uint8_t txbuf[256];
uint8_t rxbuf[256];
/* Prepare transmit pattern.*/
for (i = 0; i < sizeof(txbuf); i++)
txbuf[i] = (uint8_t)i;
/* Continuous transmission.*/
while (TRUE) {
/* Starts a VT working as watchdog to catch a malfunction in the SPI
driver.*/
chSysLock();
chVTSetI(&vt, MS2ST(10), tmo, NULL);
chSysUnlock();
spiExchange(spip, sizeof(txbuf), txbuf, rxbuf);
/* Stops the watchdog.*/
chSysLock();
if (chVTIsArmedI(&vt))
chVTResetI(&vt);
chSysUnlock();
}
}
开发者ID:Paluche,项目名称:Hubert,代码行数:28,代码来源:main.c
示例6: doScheduleForLater
static void doScheduleForLater(scheduling_s *scheduling, int delayUs, schfunc_t callback, void *param) {
int delaySt = MY_US2ST(delayUs);
if (delaySt <= 0) {
/**
* in case of zero delay, we should invoke the callback
*/
callback(param);
return;
}
bool alreadyLocked = lockAnyContext();
scheduling->callback = callback;
scheduling->param = param;
int isArmed = chVTIsArmedI(&scheduling->timer);
if (isArmed) {
/**
* timer reuse is normal for example in case of sudden RPM increase
*/
chVTResetI(&scheduling->timer);
}
#if EFI_SIMULATOR
if (callback == (schfunc_t)&seTurnPinLow) {
printf("setTime cb=seTurnPinLow p=%d\r\n", (int)param);
} else {
// printf("setTime cb=%d p=%d\r\n", (int)callback, (int)param);
}
#endif /* EFI_SIMULATOR */
chVTSetI(&scheduling->timer, delaySt, (vtfunc_t)timerCallback, scheduling);
if (!alreadyLocked) {
unlockAnyContext();
}
}
开发者ID:rusefi,项目名称:rusefi,代码行数:34,代码来源:signal_executor_sleep.cpp
示例7: evtStop
/**
* @brief Stops the timer.
* @details If the timer was already stopped then the function has no effect.
*
* @param etp pointer to an initialized @p EvTimer structure.
*/
void evtStop(EvTimer *etp) {
chSysLock();
if (chVTIsArmedI(&etp->et_vt))
chVTResetI(&etp->et_vt);
chSysUnlock();
}
开发者ID:Ozhvankov,项目名称:STM32-GPS-Tracker,代码行数:15,代码来源:evtimer.c
示例8: txend2
/*
* This callback is invoked when a transmission has physically completed.
*/
static void txend2(UARTDriver *uartp) {
(void)uartp;
palSetPad(GPIOD, GPIOD_LED5);
chSysLockFromISR();
chVTResetI(&vt5);
chVTSetI(&vt5, MS2ST(200), led5off, NULL);
chSysUnlockFromISR();
}
开发者ID:AlexShiLucky,项目名称:ChibiOS,代码行数:12,代码来源:main.c
示例9: txend2
/*
* This callback is invoked when a transmission has physically completed.
*/
static void txend2(UARTDriver *uartp) {
(void)uartp;
palClearPad(GPIOB, GPIOB_LED4);
chSysLockFromISR();
chVTResetI(&vt1);
chVTDoSetI(&vt1, MS2ST(5000), restart, NULL);
chSysUnlockFromISR();
}
开发者ID:0110,项目名称:stm32f103playground,代码行数:12,代码来源:main.c
示例10: vMBMasterPortTimersConvertDelayEnable
void vMBMasterPortTimersConvertDelayEnable()
{
/* Set current timer mode, don't change it.*/
vMBMasterSetCurTimerMode(MB_TMODE_CONVERT_DELAY);
chSysLockFromISR();
chVTResetI(&vtdelay);
chVTSetI(&vtdelay, MS2ST((uint32_t)MB_MASTER_DELAY_MS_CONVERT), timer_timeout_ind, NULL);
chSysUnlockFromISR();
}
开发者ID:MultiCalorNV,项目名称:ChibiOS,代码行数:10,代码来源:porttimer_m.c
示例11: vMBMasterPortTimersRespondTimeoutEnable
void vMBMasterPortTimersRespondTimeoutEnable()
{
//chprintf((BaseSequentialStream *)&itm_port, "%s\n", "TimeOut Enable");
//palSetPad(GPIOC, GPIOC_PIN10);
/* Set current timer mode, don't change it.*/
chSysLockFromISR();
chVTResetI(&vtout);
chVTSetI(&vtout, MS2ST((uint32_t)MB_MASTER_TIMEOUT_MS_RESPOND), timer_timeout_ind, NULL);
chSysUnlockFromISR();
}
开发者ID:MultiCalorNV,项目名称:ChibiOS,代码行数:10,代码来源:porttimer_m.c
示例12: txend2
/*
* This callback is invoked when a transmission has physically completed.
*/
static void txend2(UARTDriver *uartp) {
(void)uartp;
palClearPad(GPIOE, GPIOE_LED3_RED);
chSysLockFromIsr();
if (chVTIsArmedI(&vt1))
chVTResetI(&vt1);
chVTSetI(&vt1, MS2ST(5000), restart, NULL);
chSysUnlockFromIsr();
}
开发者ID:EmbeddedFiedel,项目名称:ChibiOS,代码行数:13,代码来源:main.c
示例13: txend2
/*
* This callback is invoked when a transmission has physically completed.
*/
static void txend2(UARTDriver *uartp) {
(void)uartp;
palSetPad(IOPORT3, GPIOC_LED);
chSysLockFromIsr();
if (chVTIsArmedI(&vt1))
chVTResetI(&vt1);
chVTSetI(&vt1, MS2ST(5000), restart, NULL);
chSysUnlockFromIsr();
}
开发者ID:Ankhbayar,项目名称:mlab-chibios,代码行数:13,代码来源:main.c
示例14: rxend
/*
* This callback is invoked when a receive buffer has been completely written.
*/
static void rxend(UARTDriver *uartp) {
(void)uartp;
/* Flashing the LED each time a character is received.*/
palSetPad(GPIOD, GPIOD_LED3);
chSysLockFromISR();
chVTResetI(&vt3);
chVTSetI(&vt3, MS2ST(200), led3off, NULL);
chSysUnlockFromISR();
}
开发者ID:AlexShiLucky,项目名称:ChibiOS,代码行数:14,代码来源:main.c
示例15: rxchar
/*
* This callback is invoked when a character is received but the application
* was not ready to receive it, the character is passed as parameter.
*/
static void rxchar(UARTDriver *uartp, uint16_t c) {
(void)uartp;
(void)c;
/* Flashing the LED each time a character is received.*/
palSetPad(GPIOB, GPIOB_LED4);
chSysLockFromISR();
chVTResetI(&vt2);
chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL);
chSysUnlockFromISR();
}
开发者ID:0110,项目名称:stm32f103playground,代码行数:15,代码来源:main.c
示例16: vMBMasterPortTimersT35Enable
void vMBMasterPortTimersT35Enable()
{
//chprintf((BaseSequentialStream *)&itm_port, "%s\n", "T35 Enable");
/* Set current timer mode, don't change it.*/
vMBMasterSetCurTimerMode(MB_TMODE_T35);
palSetPad(GPIOC, GPIOC_PIN9);
chSysLockFromISR();
chVTResetI(&vt35);
chVTSetI(&vt35, US2ST((uint32_t)2000), timer_timeout_ind, NULL);
chSysUnlockFromISR();
}
开发者ID:MultiCalorNV,项目名称:ChibiOS,代码行数:12,代码来源:porttimer_m.c
示例17: i2c_lld_master_receive_timeout
/**
* @brief Receives data via the I2C bus as master.
* @details Number of receiving bytes must be more than 1 because of stm32
* hardware restrictions.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] addr slave device address
* @param[out] rxbuf pointer to the receive buffer
* @param[in] rxbytes number of bytes to be received
* @param[in] timeout the number of ticks before the operation timeouts,
* the following special values are allowed:
* - @a TIME_INFINITE no timeout.
* .
* @return The operation status.
* @retval RDY_OK if the function succeeded.
* @retval RDY_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
* timeout the driver must be stopped and restarted
* because the bus is in an uncertain state</b>.
*
* @notapi
*/
msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
uint8_t *rxbuf, size_t rxbytes,
systime_t timeout) {
I2C_TypeDef *dp = i2cp->i2c;
VirtualTimer vt;
msg_t rdymsg;
chDbgCheck((rxbytes > 1), "i2c_lld_master_receive_timeout");
/* Global timeout for the whole operation.*/
chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
/* Releases the lock from high level driver.*/
chSysUnlock();
/* Initializes driver fields, LSB = 1 -> receive.*/
i2cp->addr = (addr << 1) | 0x01;
i2cp->errors = 0;
/* RX DMA setup.*/
dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
/* Waits until BUSY flag is reset and the STOP from the previous operation
is completed, alternatively for a timeout condition.*/
while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
if (!chVTIsArmedI(&vt)) {
chSysLock();
return RDY_TIMEOUT;
}
}
/* This lock will be released in high level driver.*/
chSysLock();
/* Atomic check on the timer in order to make sure that a timeout didn't
happen outside the critical zone.*/
if (!chVTIsArmedI(&vt))
return RDY_TIMEOUT;
/* Starts the operation.*/
dp->CR2 |= I2C_CR2_ITEVTEN;
dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
/* Waits for the operation completion or a timeout.*/
i2cp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
rdymsg = chThdSelf()->p_u.rdymsg;
if (rdymsg != RDY_TIMEOUT)
chVTResetI(&vt);
return rdymsg;
}
开发者ID:avary,项目名称:ChibiOS,代码行数:76,代码来源:i2c_lld.c
示例18: rxchar
/*
* This callback is invoked when a character is received but the application
* was not ready to receive it, the character is passed as parameter.
*/
static void rxchar(UARTDriver *uartp, uint16_t c) {
(void)uartp;
(void)c;
/* Flashing the LED each time a character is received.*/
palSetPad(GPIOE, GPIOE_LED3_RED);
chSysLockFromIsr();
if (chVTIsArmedI(&vt2))
chVTResetI(&vt2);
chVTSetI(&vt2, MS2ST(200), ledoff, NULL);
chSysUnlockFromIsr();
}
开发者ID:EmbeddedFiedel,项目名称:ChibiOS,代码行数:16,代码来源:main.c
示例19: extcb1
/* Triggered when the button is pressed or released. The LED4 is set to ON.*/
static void extcb1(EXTDriver *extp, expchannel_t channel) {
static virtual_timer_t vt4;
(void)extp;
(void)channel;
palSetPad(GPIOA, GPIOA_LED_GREEN);
chSysLockFromISR();
chVTResetI(&vt4);
/* LED4 set to OFF after 200mS.*/
chVTSetI(&vt4, MS2ST(200), led4off, NULL);
chSysUnlockFromISR();
}
开发者ID:awygle,项目名称:ChibiOS,代码行数:13,代码来源:main.c
示例20: bmk10_execute
static void bmk10_execute(void) {
static VirtualTimer vt1, vt2;
uint32_t n = 0;
test_wait_tick();
test_start_timer(1000);
do {
chSysLock();
chVTSetI(&vt1, 1, tmo, NULL);
chVTSetI(&vt2, 10000, tmo, NULL);
chVTResetI(&vt1);
chVTResetI(&vt2);
chSysUnlock();
n++;
#if defined(SIMULATOR)
ChkIntSources();
#endif
} while (!test_timer_done);
test_print("--- Score : ");
test_printn(n * 2);
test_println(" timers/S");
}
开发者ID:Amirelecom,项目名称:brush-v1,代码行数:22,代码来源:testbmk.c
注:本文中的chVTResetI函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论