本文整理汇总了C++中clear_line函数的典型用法代码示例。如果您正苦于以下问题:C++ clear_line函数的具体用法?C++ clear_line怎么用?C++ clear_line使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了clear_line函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: show_flag_status
static void show_flag_status(void)
{
int keypress;
int flag_val;
clear_line();
bb_putchar('_');
keypress = less_getch(1);
switch (keypress) {
case 'M':
flag_val = option_mask32 & FLAG_M;
break;
case 'm':
flag_val = option_mask32 & FLAG_m;
break;
case '~':
flag_val = option_mask32 & FLAG_TILDE;
break;
case 'N':
flag_val = option_mask32 & FLAG_N;
break;
case 'E':
flag_val = option_mask32 & FLAG_E;
break;
default:
flag_val = 0;
break;
}
clear_line();
printf(HIGHLIGHT"The status of the flag is: %u"NORMAL, flag_val != 0);
}
开发者ID:Cheezzolo123,项目名称:MonteDroid,代码行数:33,代码来源:less.c
示例2: add_mark
static void add_mark(void)
{
int letter;
int mark_line;
clear_line();
printf("Mark: ");
letter = tless_getch();
if (isalpha(letter)) {
mark_line = line_pos;
/* If we exceed 15 marks, start overwriting previous ones */
if (num_marks == 14)
num_marks = 0;
mark_lines[num_marks][0] = letter;
mark_lines[num_marks][1] = line_pos;
num_marks++;
}
else {
clear_line();
printf("%s%s%s", HIGHLIGHT, "Invalid mark letter", NORMAL);
}
}
开发者ID:alhazred,项目名称:busybox-solaris,代码行数:25,代码来源:less.c
示例3: set_cursor_pos
//--------------------------------------------------------------
//record_floor_reqs() -- get requests from riders outside car
void building::record_floor_reqs()
{
char ch = 'x'; //utility char for input
char ustring[BUF_LENGTH]; //utility string for input
int iFloor; //floor from which request made
char chDirection; //'u' or 'd' for up or down
set_cursor_pos(1,22); //bottom of screen
cout << "Press [Enter] to call an elevator: ";
if( !kbhit() ) //wait for keypress (must be CR)
return;
cin.ignore(10, '\n');
if(ch=='\x1B') //if escape key, end program
exit(0);
set_cursor_pos(1,22); clear_line(); //clear old text
set_cursor_pos(1,22); //bottom of screen
cout << "Enter the floor you're on: ";
cin.get(ustring, BUF_LENGTH); //get floor
cin.ignore(10, '\n'); //eat chars, including newline
iFloor = atoi(ustring); //convert to integer
cout << "Enter direction you want to go (u or d): ";
cin.get(chDirection); //(avoid multiple linefeeds)
cin.ignore(10, '\n'); //eat chars, including newline
if(chDirection=='u' || chDirection=='U')
floor_request[UP][iFloor-1] = true; //up floor request
if(chDirection=='d' || chDirection=='D')
floor_request[DN][iFloor-1] = true; //down floor request
set_cursor_pos(1,22); clear_line(); //clear old text
set_cursor_pos(1,23); clear_line();
set_cursor_pos(1,24); clear_line();
} //end record_floor_reqs()
开发者ID:rajat1293,项目名称:ALL_PROGRAMS,代码行数:35,代码来源:Elev.cpp
示例4: h_search
static el_status_t h_search(void)
{
static int Searching;
const char *old_prompt;
const char *(*move)(void);
const char *p;
if (Searching)
return el_ring_bell();
Searching = 1;
clear_line();
old_prompt = rl_prompt;
rl_prompt = "Search: ";
tty_puts(rl_prompt);
move = Repeat == NO_ARG ? prev_hist : next_hist;
p = editinput();
rl_prompt = old_prompt;
Searching = 0;
tty_puts(rl_prompt);
if (p == NULL && el_intr_pending > 0) {
el_intr_pending = 0;
clear_line();
return redisplay();
}
p = search_hist(p, move);
clear_line();
if (p == NULL) {
el_ring_bell();
return redisplay();
}
return do_insert_hist(p);
}
开发者ID:jakubpawlo,项目名称:editline,代码行数:33,代码来源:editline.c
示例5: move_cursor_to_start_of_prompt
void
move_cursor_to_start_of_prompt(int erase)
{
int termwidth = winsize.ws_col;
int promptlen_on_screen, number_of_lines_in_prompt, curpos, count;
int cooked = (saved_rl_state.cooked_prompt != NULL);
DPRINTF2(DEBUG_READLINE,"prompt_is_still_uncooked: %d, impatient_prompt: %d", prompt_is_still_uncooked, impatient_prompt);
if (prompt_is_still_uncooked && ! impatient_prompt)
return; /* @@@ is this necessary ?*/
promptlen_on_screen = colourless_strlen_unmarked(saved_rl_state.cooked_prompt ? saved_rl_state.cooked_prompt : saved_rl_state.raw_prompt, termwidth);
curpos = (within_line_edit ? 1 : 0); /* if the user has pressed a key the cursor will be 1 past the current prompt */
assert(termwidth > 0);
number_of_lines_in_prompt = 1 + ((promptlen_on_screen + curpos -1) / termwidth); /* integer arithmetic! (e.g. 171/80 = 2) */
cr();
for (count = 0; count < number_of_lines_in_prompt -1; count++) {
if (erase)
clear_line();
curs_up();
}
clear_line();
DPRINTF4(DEBUG_READLINE,"moved cursor up %d lines (erase = %d, len=%d, cooked=%d)", number_of_lines_in_prompt - 1, erase, promptlen_on_screen, cooked);
}
开发者ID:bobbyzhu,项目名称:rlwrap,代码行数:25,代码来源:readline.c
示例6: show_flag_status
static void show_flag_status(void)
{
int keypress;
int flag_val;
clear_line();
putchar('_');
keypress = tless_getch();
switch (keypress) {
case 'M':
flag_val = flags & FLAG_M;
break;
case 'm':
flag_val = flags & FLAG_m;
break;
case '~':
flag_val = flags & FLAG_TILDE;
break;
case 'N':
flag_val = flags & FLAG_N;
break;
case 'E':
flag_val = flags & FLAG_E;
break;
default:
flag_val = 0;
break;
}
clear_line();
printf("%s%s%i%s", HIGHLIGHT, "The status of the flag is: ", flag_val != 0, NORMAL);
}
开发者ID:alhazred,项目名称:busybox-solaris,代码行数:33,代码来源:less.c
示例7: init_display_buffer
void init_display_buffer(ui_context * ctx)
{
int i;
font_type * font;
font = font_list[ctx->font_id];
ctx->screen_txt_xsize = ctx->SCREEN_XRESOL / font->char_x_size;
ctx->screen_txt_ysize = (ctx->SCREEN_YRESOL / font->char_y_size);
ctx->NUMBER_OF_ENTRIES_ON_DISPLAY = ctx->screen_txt_ysize - 2; // (Display size minus top + bottom)
ctx->NUMBER_OF_FILE_ON_DISPLAY = ctx->NUMBER_OF_ENTRIES_ON_DISPLAY - 1; // (Display size minus top + bottom + tittle)
chg_video_conf(ctx);
// Clear all lines.
for(i=0;i<ctx->screen_txt_ysize;i++)
{
clear_line(ctx, i, 0 );
}
// Footprint : Current software / firmware version and title
clear_line(ctx, ctx->screen_txt_ysize - 1, INVERTED);
hxc_printf(ctx,LEFT_ALIGNED | INVERTED,0, ctx->screen_txt_ysize - 1,"FW %s",ctx->FIRMWAREVERSION);
hxc_print(ctx,CENTER_ALIGNED | INVERTED,0,ctx->screen_txt_ysize - 1,(char*)title_msg);
hxc_print(ctx,RIGHT_ALIGNED | INVERTED,0,ctx->screen_txt_ysize - 1,(char*)copyright_msg);
// Top header : current folder path
clear_line(ctx, 0, INVERTED);
hxc_print(ctx,LEFT_ALIGNED|INVERTED,0,0, (char*)cur_folder_msg);
}
开发者ID:jfdelnero,项目名称:HXCFE_file_selector,代码行数:32,代码来源:gui_utils.c
示例8: find_command
static int find_command(char *line, int curr_index, int forward)
{
int res, cmd_ind, len, ind, c, line_size;
char str[READ_BUF_SIZE];
char text[READ_BUF_SIZE];
len = strlen(line) + strlen(Title);
clear_line(len, len);
if (forward) {
if (curr_index == current_hist_ind) {
printf("%c", BELL_KEY);
return(curr_index);
}
} else {
if (curr_index <= 0) {
printf("%c", BELL_KEY);
return(0);
}
};
memset(text, 0, READ_BUF_SIZE);
len = 0;
ind = 0;
cmd_ind = curr_index;
for (;;) {
line_size = ind + strlen(History[cmd_ind]);
if (forward)
res = find_cmd_by_text(text, cmd_ind, 1);
else
res = find_cmd_by_text(text, cmd_ind, 0);
if (res != -1)
cmd_ind = res;
else
printf("%c", BELL_KEY);
if (forward)
snprintf(str, READ_BUF_SIZE,
"(i-search)`%s': ", text);
else
snprintf(str, READ_BUF_SIZE,
"(revers-i-search)`%s': ", text);
clear_line(ind, line_size);
ind = print_str_by_index(str, 0, -1);
print_str_by_index(History[cmd_ind], 0, 0);
c = getchar();
if (c == BACKSP_KEY) {
len--;
if (len < 0) len = 0;
text[len] = 0;
} else if ((c < ' ') || (c > 'z')) {
ungetc(c, stdin);
break;
};
text[len++] = c;
if (len >= READ_BUF_SIZE) break;
};
res = ind + strlen(History[cmd_ind]);
clear_line(ind, res);
return(cmd_ind);
}
开发者ID:openhpi1,项目名称:openhpitest,代码行数:58,代码来源:inputcmd.c
示例9: exception_handler
void exception_handler(int vec_no, int err_code, int eip, int cs, int eflags)
{
char *err_msg[] = {
"#DE: Dvivde Error",
"#DB: RESERVED",
"-- : NMI Interrupt",
"#BP: Breakppoint",
"#OF: Overflow",
"#BR: BOUND Range Exceeded",
"#UD: Invalid Opcode (Undefined Opcode)",
"#NM: Device Not Available (No Math Coprocessor)",
"#DF: Double Fault",
" : Coprocessor Segment Overrun (reserved)",
"#TS: Invalid TSS",
"#NP: Segment Not Present",
"#SS: Stack-Segment Fault",
"#GP: General Protection",
"#PF: Page Fault",
"-- : (Intel reserved. Do not use.)",
"#MF: x87 FPU Floating-Point Error (Math Fault)",
"#AC: Alignment Check",
"#MC: Machine Check",
"#XF: SIMD Floating-Point Exceprion"
};
//clear();
s32_print("exception_handler", (u8*)(0xb8000+160*24));
u8 str[12]="";
u8 *str_ptr = str;
clear_line(0);
clear_line(1);
clear_line(2);
clear_line(3);
clear_line(23);
s32_print(err_msg[vec_no], (u8*)(0xb8000+160*23));
str_ptr = s32_itoa(eflags, str_ptr, 16);
s32_print("eflags", (u8*)(0xb8000+160*0));
s32_print(str_ptr, (u8*)(0xb8000+160*1));
str_ptr = s32_itoa(cs, str_ptr, 16);
s32_print("cs", (u8*)(0xb8000+160*2));
s32_print(str_ptr, (u8*)(0xb8000+160*3));
str_ptr = s32_itoa(eip, str_ptr, 16);
clear_line(4);
s32_print("eip", (u8*)(0xb8000+160*4));
clear_line(5);
s32_print(str_ptr, (u8*)(0xb8000+160*5));
if (err_code != 0xffffffff)
{
str_ptr = s32_itoa(err_code, str_ptr, 16);
clear_line(6);
s32_print("err_code", (u8*)(0xb8000+160*6));
clear_line(7);
s32_print(str_ptr, (u8*)(0xb8000+160*7));
}
}
开发者ID:benwei,项目名称:simple_os,代码行数:60,代码来源:start.c
示例10: display_selection_altaccum
// *************************************************************************************************
// @fn display_selection_altaccum
// @brief Display altitude accumulator ON or OFF
// @param u8 segments where to display, usually LCD_SEG_L2_4_0
// u32 index 0 = OFF, 1 = ON
// u8 digits Not used
// u8 blanks Not used
// @return none
// *************************************************************************************************
void display_selection_altaccum (u8 segments, u32 index, u8 digits, u8 blanks)
{
if (index) {
clear_line(LINE2);
display_chars(segments, (u8*)" ON ", SEG_ON_BLINK_ON); // display "ON" on bottom line
}
else {
clear_line(LINE2);
display_chars(segments, (u8*)" OFF ", SEG_ON_BLINK_ON); // display "OFF" on bottom line
}
}
开发者ID:ngerstle,项目名称:OpenChronos,代码行数:20,代码来源:altitude.c
示例11: display_update
// *************************************************************************************************
// @fn display_update
// @brief Process display flags and call LCD update routines.
// @param none
// @return none
// *************************************************************************************************
void display_update(void)
{
unsigned char line;
unsigned char string[8];
// ---------------------------------------------------------------------
// Call Line1 display function
if (display.flag.full_update || display.flag.line1_full_update)
{
clear_line(LINE1);
fptr_lcd_function_line1(LINE1, DISPLAY_LINE_UPDATE_FULL);
} else if (ptrMenu_L1->display_update())
{
// Update line1 only when new data is available
fptr_lcd_function_line1(LINE1, DISPLAY_LINE_UPDATE_PARTIAL);
}
// ---------------------------------------------------------------------
// If message text should be displayed on Line2, skip normal update
if (message.flag.show)
{
line = LINE2;
// Select message to display
if (message.flag.type_locked)
memcpy(string, " LO?T", 6);
else if (message.flag.type_unlocked)
memcpy(string, " OPEN", 6);
// Clear previous content
clear_line(line);
fptr_lcd_function_line2(line, DISPLAY_LINE_CLEAR);
// Next second tick erases message and repaints original screen content
message.all_flags = 0;
message.flag.erase = 1;
}
// ---------------------------------------------------------------------
// Call Line2 display function
else if (display.flag.full_update || display.flag.line2_full_update)
{
clear_line(LINE2);
fptr_lcd_function_line2(LINE2, DISPLAY_LINE_UPDATE_FULL);
} else if (ptrMenu_L2->display_update() && !message.all_flags)
{
// Update line2 only when new data is available
fptr_lcd_function_line2(LINE2, DISPLAY_LINE_UPDATE_PARTIAL);
}
// Clear display flag
display.all_flags = 0;
}
开发者ID:darkdanito,项目名称:ICT2104-Embedded_Programming-SIT_UP,代码行数:58,代码来源:main.c
示例12: CaenVmeIrqCheck
void CaenVmeIrqCheck(int32_t BHandle, man_par_t *man)
{
CVErrorCodes ret ;
con_printf(" CHECK IRQ\n");
CAENVME_IRQCheck(BHandle,&man->irqstat); // Check IRQ Status
con_printf(" IRQ status: %02X\n",man->irqstat);
con_printf(" Interrupt Level to Acknowledge (0 to exit) : "); // Get the int level
con_scanf("%x",&man->level);
if (man->level == 0)
{
clear_line(Y_COMM);
clear_line(Y_COMM+1);
clear_line(Y_COMM+2);
return ;
}
con_printf_xy(X_COMM,Y_COMM+2," Waiting for interrupt ... Press any key to stop.");
while (!(man->irqstat & (1<<(man->level-1))) && !con_kbhit()) // Check Int loop
CAENVME_IRQCheck(BHandle,&man->irqstat);
gotoxy(X_COMM,Y_COMM) ;
if(man->irqstat & (1<<(man->level-1)))
{
ret = CAENVME_IACKCycle(BHandle,man->level,&man->data,man->dtsize);
switch (ret)
{
case cvSuccess : con_printf(" Cycle completed normally\n");
con_printf(" Int. Ack. on IRQ%d: StatusID = %0X",man->level,man->data);
break ;
case cvBusError : con_printf(" Bus Error !!!");
break ;
case cvCommError : con_printf(" Communication Error !!!");
break ;
default : con_printf(" Unknown Error !!!");
break ;
}
}
else
con_printf(" Interrupt request IRQ%d not active",man->level);
}
开发者ID:bianle,项目名称:daq,代码行数:51,代码来源:CAENVMEDemoVme.c
示例13: update_display
void update_display(void) {
void (*display_handler)(char*,char*) = state_handlers[state].display;
char line_1[17];
char line_2[17];
clear_line(line_1);
clear_line(line_2);
if (display_handler == NULL) return;
display_handler(line_1, line_2);
display_line(LCD_LINE_1, line_1);
display_line(LCD_LINE_2, line_2);
}
开发者ID:iWuzHere,项目名称:SYSC2003-project,代码行数:14,代码来源:assign65.c
示例14: menu_import
/*ARGSUSED*/
int
menu_import(WINDOW *win, node_t *current, node_t *list)
{
char inv_path[MAXPATHLEN];
struct stat s;
char *fstabname;
data_t *d;
for(;;) {
inv_path[0] = '\0';
if(get_string(win, "Path to inventory to be imported: ", inv_path, MAXPATHLEN) == ERR) {
put_error("Error: invalid input");
continue;
}
if(strlen(inv_path) == 0) {
clear_line(stdscr, LINES - 1);
return BOOL_FALSE;
}
if(stat(inv_path, &s) < 0 || !S_ISDIR(s.st_mode)) {
put_error("Error: invalid path");
continue;
}
clear_line(stdscr, LINES - 1);
fstabname = GetFstabFullPath(inv_path);
if(fstabname == NULL) {
put_footer("internal memory error: import inventory", ALIGN_LEFT);
exit(1);
}
while(current->next != NULL) {
current = current->next;
}
generate_fstab_menu(inv_path, current, 0, fstabname);
free(fstabname);
while(current->next != NULL) {
current = current->next;
d = current->data;
d->text[1] = 'I';
d->imported = BOOL_TRUE;
}
redraw_screen = BOOL_TRUE;
break;
}
return BOOL_FALSE;
}
开发者ID:jkkm,项目名称:xfsdump,代码行数:50,代码来源:cmenu.c
示例15: chg_dir
void
chg_dir()
{
extern int fd;
WINDOW *ch_win, *newwin();
char *ans, *dir, *expand(), *cwd, *getcwd(), cwdbuf[200];
char *get_str();
cwd = getcwd(cwdbuf, 200);
ch_win = newwin(6, 70, 5, 5);
mvwprintw(ch_win, 2, 4, "Current directory: %s", cwd);
mvwaddstr(ch_win, 3, 4, "New directory: ");
box(ch_win, VERT, HORZ);
mvwattrstr(ch_win, 0, 3, A_BOLD, " Change directory ");
wmove(ch_win, 3, 19);
wrefresh(ch_win);
/* get the answer */
while ((ans = get_str(ch_win, 80, "", " \t\n")) != NULL) {
/* a CR means no change */
if (*ans == '\0')
break;
/* expand the input */
dir = expand(ans);
/* if you have search permission */
if (!access(dir, 1)) {
if (!chdir(dir))
break;
}
beep();
mvwattrstr(ch_win, 4, 15, A_BOLD, "No such directory or no access permission");
wrefresh(ch_win);
wait_key(ch_win, 3);
/* clean up the mess */
clear_line(ch_win, 3, 19, TRUE);
clear_line(ch_win, 4, 14, TRUE);
wmove(ch_win, 3, 19);
wrefresh(ch_win);
}
if (fd == -1) {
werase(ch_win);
wrefresh(ch_win);
}
delwin(ch_win);
return;
}
开发者ID:LambdaCalculus379,项目名称:SLS-1.02,代码行数:48,代码来源:chg_dir.c
示例16: oMemBuff
//-----------------------------------------------------------------------------
void graphics::show_time(const tm* lcTime, int line_no)
{
const int SIZE = 50;
int length;
int xCo;
char memBuff[SIZE];
ostrstream oMemBuff(memBuff, SIZE);
oMemBuff << dayOfWeek[lcTime->tm_wday] << ", " << lcTime->tm_mday << ' '
<< months[lcTime->tm_mon] << ' ' << lcTime->tm_year + 1900 << ". ";
if(lcTime->tm_hour < 10)
oMemBuff << '0' << lcTime->tm_hour << " : ";
else
oMemBuff << lcTime->tm_hour << " : ";
if(lcTime->tm_min < 10)
oMemBuff << '0' << lcTime->tm_min << " : ";
else
oMemBuff << lcTime->tm_min << " : ";
if(lcTime->tm_sec < 10)
oMemBuff << '0' << lcTime->tm_sec;
else
oMemBuff << lcTime->tm_sec;
oMemBuff << '\0';
length = strlen(memBuff);
xCo = (console_size.X - length) / 2;
set_cursor_pos(1, line_no);
clear_line();
set_cursor_pos(xCo, line_no);
cout << memBuff;
}
开发者ID:skandhurkat,项目名称:Just-For-Fun,代码行数:30,代码来源:msConGra.cpp
示例17: distrib_buttons
int distrib_buttons(int i, char **result, char *buffer, int *v)
{
if (buffer[0] == 10)
return (-2);
else if (buffer[0] == 27 && buffer[1] == 91)
i = distrib_arrow(i, result, buffer, v);
else if (buffer[0] == 127)
*result = del_c(*result, &i);
else if (buffer[0] == 9 && *result && i == ft_strlen(*result))
i = distrib_tab(i, result);
else if (buffer[0] == 12)
clear_and_prompt();
else if (buffer[0] == 1)
i = ctrl_a(i, result);
else if (buffer[0] == 5)
i = ctrl_k(i, result);
else if (buffer[0] == 21)
{
clear_line(i + 1, ft_strlen(*result));
*result = NULL;
i = 0;
}
else if (buffer[0] == 4)
ft_exit(NULL);
else
ft_putstr(tgetstr("le", NULL));
return (i);
}
开发者ID:Fusiow,项目名称:msh,代码行数:28,代码来源:read.c
示例18: buffer_line
static void buffer_line(int linenum)
{
int i;
past_eof = 0;
if (linenum < 0 || linenum > num_flines) {
clear_line();
printf("%s%s%i%s", HIGHLIGHT, "Cannot seek to line number ", linenum + 1, NORMAL);
}
else if (linenum < (num_flines - height - 2)) {
for (i = 0; i < (height - 1); i++) {
free(buffer[i]);
buffer[i] = bb_xstrdup(flines[linenum + i]);
}
line_pos = linenum;
buffer_print();
}
else {
for (i = 0; i < (height - 1); i++) {
free(buffer[i]);
if (linenum + i < num_flines + 2)
buffer[i] = bb_xstrdup(flines[linenum + i]);
else
buffer[i] = bb_xstrdup((flags & FLAG_TILDE) ? "\n" : "~\n");
}
line_pos = linenum;
/* Set past_eof so buffer_down and buffer_up act differently */
past_eof = 1;
buffer_print();
}
}
开发者ID:alhazred,项目名称:busybox-solaris,代码行数:31,代码来源:less.c
示例19: draw_keybindings
void
draw_keybindings(PANEL *panel, const char *keybindings[], int count)
{
int height, width, key, xpos = 0;
// Get window available space
WINDOW *win = panel_window(panel);
getmaxyx(win, height, width);
// Reverse colors on monochrome terminals
if (!has_colors())
wattron(win, A_REVERSE);
// Write a line all the footer width
wattron(win, COLOR_PAIR(CP_DEF_ON_CYAN));
clear_line(win, height - 1);
// Draw keys and their actions
for (key = 0; key < count; key += 2) {
wattron(win, A_BOLD | COLOR_PAIR(CP_WHITE_ON_CYAN));
mvwprintw(win, height - 1, xpos, "%-*s", strlen(keybindings[key]) + 1, keybindings[key]);
xpos += strlen(keybindings[key]) + 1;
wattroff(win, A_BOLD | COLOR_PAIR(CP_WHITE_ON_CYAN));
wattron(win, COLOR_PAIR(CP_BLACK_ON_CYAN));
mvwprintw(win, height - 1, xpos, "%-*s", strlen(keybindings[key + 1]) + 1,
keybindings[key + 1]);
wattroff(win, COLOR_PAIR(CP_BLACK_ON_CYAN));
xpos += strlen(keybindings[key + 1]) + 3;
}
// Disable reverse mode in all cases
wattroff(win, A_REVERSE);
}
开发者ID:erhuabushuo,项目名称:sngrep,代码行数:33,代码来源:ui_manager.c
示例20: update_schedule
u8 update_schedule()
{
update_schedule_time();
clear_line(LINE2);
if(sSchedule.state == SCHEDULE_ENABLED)
{
if(sSchedule.currentlyShown == PERIOD)
{
display_chars(LCD_SEG_L2_4_0, sSchedule.period, SEG_ON);
}
else if(sSchedule.currentlyShown == TIME)
{
display_chars(LCD_SEG_L2_3_0, itoa(sSchedule.end, 4, 0), SEG_ON);
display_symbol(LCD_SEG_L2_COL0, SEG_ON);
}
}
else if (sSchedule.state == SCHEDULE_DISABLED)
{
display_chars(LCD_SEG_L2_4_0, sSchedule.period, SEG_ON);
}
/*else if (sSchedule.state == SCHEDULE_NONE)
{
if (is_schedule())
{
menu_skip_next(LINE2);
}
}*/
return 1;
}
开发者ID:lieb005,项目名称:My_Stuff,代码行数:29,代码来源:schedule.c
注:本文中的clear_line函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论