本文整理汇总了C++中conf_init函数的典型用法代码示例。如果您正苦于以下问题:C++ conf_init函数的具体用法?C++ conf_init怎么用?C++ conf_init使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了conf_init函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: vss_opts_changed
static int vss_opts_changed(struct sdirs *sdirs, struct conf *cconf,
const char *incexc)
{
int ret=0;
struct conf oldconf;
struct conf newconf;
conf_init(&oldconf);
conf_init(&newconf);
// Figure out the old config, which is in the incexc file left
// in the current backup directory on the server.
if(parse_incexcs_path(&oldconf, sdirs->cincexc))
{
// Assume that the file did not exist, and therefore
// the old split_vss setting is 0.
oldconf.split_vss=0;
oldconf.strip_vss=0;
}
// Figure out the new config, which is either in the incexc file from
// the client, or in the cconf on the server.
if(incexc)
{
if(parse_incexcs_buf(&newconf, incexc))
{
// Should probably not got here.
newconf.split_vss=0;
newconf.strip_vss=0;
}
}
else
{
newconf.split_vss=cconf->split_vss;
newconf.strip_vss=cconf->strip_vss;
}
if(newconf.split_vss!=oldconf.split_vss)
{
logp("split_vss=%d (changed since last backup)\n",
newconf.split_vss);
ret=1;
}
if(newconf.strip_vss!=oldconf.strip_vss)
{
logp("strip_vss=%d (changed since last backup)\n",
newconf.strip_vss);
ret=1;
}
if(ret) logp("All files will be treated as new\n");
return ret;
}
开发者ID:jkniiv,项目名称:burp,代码行数:51,代码来源:run_action.c
示例2: conf_load
int conf_load(struct conf *conf, const char *conf_name,
char *config_search_dirs[], char *plugin_search_dirs[])
{
conf_init(conf);
cur_conf = conf;
cur_conf->config_search_dirs = config_search_dirs;
cur_conf->plugin_search_dirs = plugin_search_dirs;
if (!(yyin = conf_push_config(cur_conf, conf_name, NULL))) {
return -1;
}
if (yyparse()) {
if (fclose(yyin)) {
wminput_err("Error closing configuration file");
}
conf_unload(cur_conf);
return -1;
}
if (uinput_open(cur_conf)) {
conf_unload(cur_conf);
return -1;
}
return 0;
}
开发者ID:donington,项目名称:cwiid,代码行数:27,代码来源:conf.c
示例3: reload
int reload(struct conf *conf, const char *conffile, bool firsttime,
int oldmax_children, int oldmax_status_children, int json)
{
if(!firsttime) logp("Reloading config\n");
conf_init(conf);
if(conf_load(conffile, conf, 1)) return 1;
/* change umask */
umask(conf->umask);
// Try to make JSON output clean.
if(json) conf->log_to_stdout=0;
// This will turn on syslogging which could not be turned on before
// conf_load.
set_logfp(NULL, conf);
#ifndef HAVE_WIN32
if(conf->mode==MODE_SERVER)
setup_signals(oldmax_children, conf->max_children,
oldmax_status_children, conf->max_status_children);
#endif
// Do not try to change user or group after the first time.
if(firsttime && chuser_and_or_chgrp(conf))
return 1;
return 0;
}
开发者ID:jkniiv,项目名称:burp,代码行数:31,代码来源:prog.c
示例4: test2
void test2() {
struct aug_conf c;
int argc = 1;
char *argv[] = {g_argv[0], NULL};
const char *path = "/tmp/augrc";
dictionary *ini;
FILE *f = fopen(path, "w");
if(f == NULL)
err(1, "file: %s", path);
fclose(f);
diag("blank ini file and no args");
ini = ciniparser_load(path);
ok1(ini != NULL);
conf_init(&c);
ok1(opt_parse(argc, argv, &c) == 0);
ok1(opt_set_amt(&c) == 0);
conf_merge_ini(&c, ini);
ok1( compare_conf_vals(&c, &g_default_conf) == 0);
conf_free(&c);
#define TEST2AMT 4
ciniparser_freedict(ini);
unlink(path);
}
开发者ID:cantora,项目名称:aug,代码行数:27,代码来源:conf_test.c
示例5: main
int main(int argc, char *argv[])
{
int i, len, total_tests;
#define TESTN(_num) {test##_num, TEST##_num##AMT}
struct conf_test tests[] = {
TESTN(1),
TESTN(2),
TESTN(3),
TESTN(4),
TESTN(5)
};
g_argc = argc;
g_argv = argv;
conf_init(&g_default_conf);
total_tests = 0;
len = AUG_ARRAY_SIZE(tests);
for(i = 0; i < len; i++) {
total_tests += tests[i].amt;
}
plan_tests(total_tests);
for(i = 0; i < len; i++) {
(*tests[i].fn)();
}
return exit_status();
}
开发者ID:cantora,项目名称:aug,代码行数:30,代码来源:conf_test.c
示例6: my_conf_init
int my_conf_init(const char *log)
{
int res;
if( (res = conf_init(log)) < 0 ){
return res;
}
CONF_FILL_INT(daemon);
CONF_FILL_INT(worker);
CONF_FILL_INT(max_connections);
CONF_FILL_STR(ip);
CONF_FILL_STR(port);
CONF_FILL_INT(read_client_timeout);
CONF_FILL_INT(write_mysql_timeout);
CONF_FILL_INT(read_mysql_write_client_timeout);
CONF_FILL_INT(prepare_mysql_timeout);
CONF_FILL_INT(idle_timeout);
CONF_FILL_INT(mysql_ping_timeout);
CONF_FILL_STR(user);
CONF_FILL_STR(passwd);
CONF_FILL_STR(mysql_conf);
CONF_FILL_STR(log);
CONF_FILL_STR(loglevel);
CONF_FILL_STR(sqllog);
return 0;
}
开发者ID:chenbk85,项目名称:myrelay,代码行数:28,代码来源:my_conf.c
示例7: config_read_file
int
config_read_file(char *path)
{
HASH_CTX *hctx;
int xerror;
char ebuf[BUFSIZ];
if (path == NULL)
{
if (Cfilename == NULL)
return errno = EINVAL;
else
path = Cfilename;
}
else
Cfilename = str_dup(path, __FILE__, __LINE__);
hctx = conf_init(NULL, path, ebuf, sizeof ebuf);
if (hctx == NULL)
{
xerror = (errno == 0) ? errno = ENOMEM : errno;
(void) fprintf(stderr, "Read: %s\n", ebuf);
return errno = xerror;
}
(void) pthread_mutex_lock(&Hconfmutex);
if (Hconfbak != NULL)
Hconfbak = conf_shutdown(Hconfbak);
Hconfbak = Hconf;
Hconf = hctx;
(void) pthread_mutex_unlock(&Hconfmutex);
return errno=0;
}
开发者ID:bcxorg,项目名称:onepixd,代码行数:33,代码来源:readconf.c
示例8: main
int main( int argc, char *argv[] )
{
conf_t conf[1];
search_t *res;
int i, j;
if( argc != 2 )
{
fprintf( stderr, "Incorrect amount of arguments\n" );
return( 1 );
}
conf_init( conf );
res = malloc( sizeof( search_t ) * ( conf->search_amount + 1 ) );
memset( res, 0, sizeof( search_t ) * ( conf->search_amount + 1 ) );
res->conf = conf;
i = search_makelist( res, argv[1] );
if( i == -1 )
{
fprintf( stderr, "File not found\n" );
return( 1 );
}
printf( "%i usable mirrors:\n", search_getspeeds( res, i ) );
search_sortlist( res, i );
for( j = 0; j < i; j ++ )
printf( "%-70.70s %5i\n", res[j].url, res[j].speed );
return( 0 );
}
开发者ID:Krusca,项目名称:axeldroid,代码行数:31,代码来源:search.c
示例9: main
int main(int argc, LPSTR argv[]) {
int ret;
Config conf;
TCHAR conf_file[MAX_PATH];
conf_init(&conf);
ret = GetModuleFileName(NULL, conf_file, MAX_PATH);
if (ret <= 0) {
my_message_box("Unable to GetModuleFileName ... (code: %d)\n", ret);
return 1;
}
PathRemoveExtension(conf_file);
PathAddExtension(conf_file, ".ini");
if (! PathFileExists(conf_file)) {
my_message_box("No such file %s\n", conf_file);
return 1;
}
read_conf(conf_file, &conf);
if (conf.delay != 0)
Sleep(conf.delay * 1000);
ret = launch(conf);
return ret;
}
开发者ID:gvsurenderreddy,项目名称:openulteo,代码行数:29,代码来源:main.c
示例10: init
void
init(void)
{
app_init();
doi_init();
exchange_init();
group_init();
ipsec_init();
isakmp_doi_init();
libcrypto_init();
timer_init();
/* The following group are depending on timer_init having run. */
conf_init();
connection_init();
/* This depends on conf_init, thus check as soon as possible. */
log_reinit();
/* policy_init depends on conf_init having run. */
policy_init();
/* Depends on conf_init and policy_init having run */
cert_init();
crl_init();
sa_init();
transport_init();
virtual_init();
udp_init();
nat_t_init();
udp_encap_init();
vendor_init();
}
开发者ID:sofuture,项目名称:bitrig,代码行数:35,代码来源:init.c
示例11: fopen
/**
* Konstruktor opens the configuration, which is given by the filename
*/
config::config(char* filename){
myfilename = filename;
fp = fopen(myfilename, "r");
group = NULL;
conf_init(&conf);
conf_read(&conf, fp);
fclose(fp);
}
开发者ID:fnal,项目名称:elComandante,代码行数:11,代码来源:config.cpp
示例12: pd_init
void pd_init(void)
{
mess_init();
obj_init();
conf_init();
glob_init();
garray_init();
}
开发者ID:Tzero2,项目名称:pd,代码行数:8,代码来源:m_pd.c
示例13: os_main
int os_main(int argc, char* argv[])
{
adv_conf* context;
char* section_map[1];
context = conf_init();
if (os_init(context) != 0)
goto err_conf;
inputb_reg(context, 1);
inputb_reg_driver_all(context);
if (conf_input_args_load(context, 0, "", &argc, argv, error_callback, 0) != 0)
goto err_os;
if (argc > 1) {
fprintf(stderr, "Unknown argument '%s'\n", argv[1]);
goto err_os;
}
section_map[0] = "";
conf_section_set(context, section_map, 1);
if (inputb_load(context) != 0)
goto err_os;
if (os_inner_init("AdvanceINPUT") != 0)
goto err_os;
if (inputb_init() != 0)
goto err_os_inner;
if (inputb_enable(0) != 0)
goto err_input;
run();
inputb_disable();
inputb_done();
os_inner_done();
os_done();
conf_done(context);
return EXIT_SUCCESS;
err_input:
inputb_done();
err_os_inner:
os_inner_done();
err_os:
os_done();
err_conf:
conf_done(context);
return EXIT_FAILURE;
}
开发者ID:BirchJD,项目名称:advancemame-0.106.1-RPi,代码行数:57,代码来源:i.c
示例14: settings_init
int settings_init(const char *path) {
settings_path = path;
memset(&_settings, 0, sizeof(settings));
for(int i = 0;i < sizeof(struct_to_fields)/sizeof(struct_to_field);i++) {
const struct_to_field *s2f = &struct_to_fields[i];
settings_add_fields(s2f->fields, s2f->num_fields);
}
return conf_init(settings_path);
}
开发者ID:acasaccia,项目名称:openomf,代码行数:9,代码来源:settings.c
示例15: kadnode_init
int kadnode_init(void) {
if (gconf == NULL) {
// Setup gconf
conf_init();
return 0;
} else {
return 1;
}
}
开发者ID:mwarning,项目名称:KadNode,代码行数:9,代码来源:libkadnode.c
示例16: conf_open
static rmt_conf *
conf_open(char *filename)
{
int ret;
rmt_conf *cf = NULL;
FILE *fh = NULL;
sds path = NULL;
if (filename == NULL) {
log_error("ERROR: configuration file name is NULL.");
return NULL;
}
path = getAbsolutePath(filename);
if (path == NULL) {
log_error("ERROR: configuration file name '%s' is error.", filename);
goto error;
}
fh = fopen(path, "r");
if (fh == NULL) {
log_error("ERROR: failed to open configuration '%s': %s", path,
strerror(errno));
goto error;
}
cf = rmt_alloc(sizeof(*cf));
if (cf == NULL) {
goto error;
}
ret = conf_init(cf);
if(ret != RMT_OK){
goto error;
}
cf->fname = path;
cf->fh = fh;
return cf;
error:
if(fh != NULL) {
fclose(fh);
}
if (cf != NULL) {
conf_destroy(cf);
}
if (path != NULL) {
sdsfree(path);
}
return NULL;
}
开发者ID:654894017,项目名称:redis-migrate-tool,代码行数:57,代码来源:rmt_conf.c
示例17: main
int main(int argc, char **argv)
{
struct sigaction sig_stop;
struct sigaction sig_time;
_main = main_init(argc, argv);
_log = log_init();
_main->conf = conf_init(argc, argv);
_main->work = work_init();
_main->tcp = tcp_init();
_main->node = node_init();
_main->mime = mime_init();
/* Check configuration */
conf_print();
/* Catch SIG INT */
unix_signal(&sig_stop, &sig_time);
/* Fork daemon */
unix_fork(log_console(_log));
/* Increase limits */
unix_limits(_main->conf->cores, CONF_EPOLL_MAX_EVENTS);
/* Load mime types */
mime_load();
mime_hash();
/* Prepare TCP daemon */
tcp_start();
/* Drop privileges */
unix_dropuid0();
/* Start worker threads */
work_start();
/* Stop worker threads */
work_stop();
/* Stop TCP daemon */
tcp_stop();
mime_free();
node_free();
tcp_free();
work_free();
conf_free();
log_free(_log);
main_free();
return 0;
}
开发者ID:tempbottle,项目名称:torrentkino,代码行数:56,代码来源:tumbleweed.c
示例18: main
int main()
{
conf_init();
log_reset();
log_daemon();
while(1)
{
sleep(10);
}
}
开发者ID:exeasy,项目名称:pma2,代码行数:10,代码来源:logsrv.c
示例19: pd_init
void pd_init(void)
{
if (!pd_this)
pd_this = pdinstance_donew(0);
mess_init();
obj_init();
conf_init();
glob_init();
garray_init();
}
开发者ID:amurtet,项目名称:pure-data,代码行数:10,代码来源:m_pd.c
示例20: pool_init
/** 函数名: pool_init
* 功能描述: 初始化线程池
* 参数列表: max_thread_num :输入要建的线程池的线程最大数目
* 返回值: 无
*/
void pool_init(int max_thread_num)
{
int i;
conf_init();
if(max_thread_num < g_min_thread_num)
{
max_thread_num = g_min_thread_num;
}
else if(max_thread_num > g_max_thread_num)
{
max_thread_num = g_max_thread_num;
}
pthread_attr_t attr;
int err;
err= pthread_attr_init(&attr);
if(err != 0)
{
perror("pthread_attr_init");
exit(1);
}
err = pthread_attr_setdetachstate(&attr,PTHREAD_CREATE_DETACHED);
if(err != 0)
{
perror("pthread_attr_setdetachstate");
exit(1);
}
g_pool = (thread_pool *)malloc(sizeof(thread_pool));
pthread_mutex_init(&(g_pool->queue_lock),NULL);
pthread_mutex_init(&(g_pool->remove_queue_lock),NULL);
pthread_cond_init(&(g_pool->queue_ready),NULL);
g_pool->queue_head = NULL;
g_pool->max_thread_num = max_thread_num;
g_pool->thread_queue =NULL;
g_pool->thread_idle_queue = NULL;
g_pool->idle_queue_num = 0;
g_pool->cur_queue_size = 0;
g_pool->shutdown = 0;
int temp;
for(i = 0; i < max_thread_num; i++)
{
pthread_t thread_id;
pthread_create(&thread_id,&attr,thread_routine,NULL);
thread_queue_add_node(&(g_pool->thread_queue),thread_id,&temp);
printf("temp&&&&&&&&&&&&&%d\n",temp);
}
pthread_attr_destroy(&attr);
}
开发者ID:Boshin,项目名称:thread_pool,代码行数:60,代码来源:threadpool.c
注:本文中的conf_init函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论