本文整理汇总了C++中correct函数的典型用法代码示例。如果您正苦于以下问题:C++ correct函数的具体用法?C++ correct怎么用?C++ correct使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了correct函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: parsebf
int
parsebf(char *buf)
{
double rainrate, raintot;
if (!sumcheck(buf, SIZEBF)) {
errlog(8, "Checksum failure for BF block.");
return (-1);
}
rainrate = (xDtoint(buf[2]) * 100) + DDtoint(buf[1]);
raintot = (xDtoint(buf[6]) * 100) + DDtoint(buf[5]);
correct(rainrate, current_cal.rain_rate_mul, current_cal.rain_rate_offs);
correct(raintot, current_cal.rain_tot_mul, current_cal.rain_tot_offs);
pthread_mutex_lock(¤t_obs_lock);
if (raintot < current_obs.rain_tot) {
current_obs.rtot_offset += current_obs.rain_tot;
}
pthread_mutex_unlock(¤t_obs_lock);
update(current_obs.rain_rate, rainrate, RAINRATE);
update(current_obs.rain_tot, raintot, RAINTOT);
errlog2(9, "Rain rate %g mm/hr, Rain tot %g mm", rainrate, raintot);
}
开发者ID:glocklueng,项目名称:WeatherStation,代码行数:26,代码来源:parse.c
示例2: parseaf
int
parseaf(char *buf)
{
double baro, dewpt_in, dewpt_out;
if (!sumcheck(buf, SIZEAF)) {
errlog(8, "Checksum failure for AF block.");
return (-1);
}
baro = DDtoint(buf[3]) + (DDtoint(buf[4]) * 100.0) + (xDtoint(buf[5]) * 10000.0);
baro /= 10;
dewpt_in = DDtoint(buf[7]);
dewpt_out = DDtoint(buf[18]);
correct(dewpt_in, current_cal.dp_in_mul, current_cal.dp_in_offs);
correct(dewpt_out, current_cal.dp_out_mul, current_cal.dp_out_offs);
correct(baro, current_cal.barometer_mul, current_cal.barometer_offs);
update(current_obs.dp_in, dewpt_in, DEWIN);
update(current_obs.dp_out, dewpt_out, DEWOUT);
update(current_obs.barometer, baro, BARO);
errlog1(9, "Barometer: %g mb", baro);
errlog2(9, "Indoor dewpoint: %gC, Outdoor dewpoint: %gC", dewpt_in, dewpt_out);
}
开发者ID:glocklueng,项目名称:WeatherStation,代码行数:28,代码来源:parse.c
示例3: rmset
void ui::line(int x0, int y0, int x1, int y1, unsigned char color)
{
if(y0==y1)
{
if(!correct(x0, y0, x1, y1, clipping))
return;
rmset(ptr(x0, y0), color, x1-x0+1);
}
else if(x0==x1)
{
if(!correct(x0, y0, x1, y1, clipping))
return;
linev(ptr(x0, y0), scanline, y1-y0+1, color);
}
else
{
int dx = iabs(x1-x0), sx = x0<x1 ? 1 : -1;
int dy = -iabs(y1-y0), sy = y0<y1 ? 1 : -1;
int err = dx+dy, e2;
for(;;)
{
pixel(x0, y0, color);
if(x0==x1 && y0==y1)
break;
e2 = 2*err;
if(e2 >= dy) { err += dy; x0 += sx; }
if(e2 <= dx) { err += dx; y0 += sy; }
}
}
}
开发者ID:Pavelius,项目名称:fallout2,代码行数:30,代码来源:bitmap.cpp
示例4: parse8f
int
parse8f(char *buf)
{
int hour, min, sec, day, mon;
double hum_in, hum_out;
if (!sumcheck(buf, SIZE8F)) {
errlog(8, "Checksum failure for 8F block.");
return (-1);
}
sec = DDtoint(buf[1]);
min = DDtoint(buf[2]);
hour = DDtoint(buf[3]);
mon = xDtoint(buf[5]);
day = DDtoint(buf[4]);
hum_in = DDtoint(buf[8]);
hum_out = DDtoint(buf[20]);
current_obs.sec = sec;
current_obs.min = min;
current_obs.hour = hour;
current_obs.month = mon;
current_obs.day = day;
correct(hum_in, current_cal.rh_in_mul, current_cal.rh_in_offs);
correct(hum_out, current_cal.rh_out_mul, current_cal.rh_out_offs);
update(current_obs.rh_in, hum_in, HUMIN);
update(current_obs.rh_out, hum_out, HUMOUT);
errlog5(9, "%s %d %.2d:%.2d:%.2d", month[mon], day, hour, min, sec);
errlog2(9, "Indoor hum: %g%%, Outdoor hum: %g%%", hum_in, hum_out);
}
开发者ID:glocklueng,项目名称:WeatherStation,代码行数:32,代码来源:parse.c
示例5: bmeps_setup
void bmeps_setup(int psl, int col, int a85, int rl, int fl,
int alpha, int trans, int altrig,
int mix, int specbg, int bg_red, int bg_green, int bg_blue, int dsc_show
)
{
is_configured = 1;
bmeps_color = bmeps_enc_a85 = bmeps_enc_rl = bmeps_enc_fl = 0;
bmeps_alpha = bmeps_trans = bmeps_altrig = 0;
bmeps_mix = bmeps_specbg = 0;
bmeps_bg_red = bmeps_bg_green = bmeps_bg_blue = 255;
bmeps_pslevel = psl;
bmeps_mix = (mix ? 1 : 0);
bmeps_specbg = (specbg ? 1 : 0);
bmeps_bg_red = bg_red;
bmeps_bg_green = bg_green;
bmeps_bg_blue = bg_blue;
show_dsc_comments = dsc_show;
correct(bmeps_bg_red);
correct(bmeps_bg_green);
correct(bmeps_bg_blue);
if(bmeps_pslevel < 1) bmeps_pslevel = 1;
if(bmeps_pslevel > MAXPSLEVEL) bmeps_pslevel = MAXPSLEVEL;
if(bmeps_pslevel > 1) {
bmeps_color = (col ? 1 : 0);
bmeps_enc_a85 = (a85 ? 1 : 0);
bmeps_enc_rl = (rl ? 1 : 0);
if(bmeps_pslevel > 2) {
bmeps_enc_fl = ( fl ? 1 : 0 );
if(alpha) {
bmeps_alpha = 1;
bmeps_trans = (trans ? 1 : 0); bmeps_altrig = (altrig ? 1 : 0);
}
}
}
}
开发者ID:ABratovic,项目名称:open-watcom-v2,代码行数:35,代码来源:bmeps.c
示例6: NSStrSeqGet
//
// Extract the index'th string in the sequence
//
LPSTR NSStrSeqGet(NSstringSeq seq, LONG index)
{
char* s;
int N;
if (!seq)
{
return NULL;
}
if (index<0)
{
return NULL;
}
if (!index)
return correct(seq);
for (s=seq+1,N=0; ((*s) || (*(s-1))) && (N<index); s++)
{
if (!(*s))
N++;
}
if (N==index)
return correct(s);
return NULL;
}
开发者ID:binoc-software,项目名称:mozilla-cvs,代码行数:32,代码来源:nsstrseq.cpp
示例7: InfIntException
const InfInt& InfInt::operator%=(const InfInt& rhs)
{
if (rhs == zero)
{
#ifdef INFINT_USE_EXCEPTIONS
throw InfIntException("division by zero");
#else
std::cerr << "Division by zero!" << std::endl;
return zero;
#endif
}
InfInt D = (rhs.pos ? rhs : -rhs), N = (pos ? *this : -*this);
bool oldpos = pos;
val.clear();
for (int i = (int)N.val.size() - 1; i >= 0; --i)
{
val.insert(val.begin(), (ELEM_TYPE)0);
val[0] = N.val[i];
correct(true);
*this -= D * dInR(*this, D);
}
correct();
pos = (val.size() == 1 && val[0] == 0) ? true : oldpos;
return *this;
}
开发者ID:nex-7,项目名称:bmstu-projects,代码行数:25,代码来源:InfInt.cpp
示例8: disable
bool GameLayer::ccTouchBegan(CCTouch *pTouch, CCEvent *pEvent) {
if (LOCAL_CONTEXT->firstRun()) { //第一次启动,点击取消帮助画面层
this->removeHelpLayer();
return false;
}
if (running) {
disable();
CCSprite *lastItem = items[0];
long itemnum = (long) lastItem->getUserData();
//CCDirector::sharedDirector()->replaceScene(FinishLayer::scene());
CCSize winsize = CCDirector::sharedDirector()->getWinSize();
CCPoint location = pTouch->getLocation();
if (location.x < winsize.width / 2) {
LOCAL_CONTEXT->playEffect("left.mp3");
//瓶子 6-10
if (itemnum >= 6) {
correct(-0.32);
} else {
mistake(-0.32);
}
} else {
LOCAL_CONTEXT->playEffect("right.mp3");
//罐子 1-5
if (itemnum <= 5) {
correct(0.32);
} else {
mistake(0.32);
}
}
}
return false;
}
开发者ID:beforeeight,项目名称:sort,代码行数:34,代码来源:GameScene.cpp
示例9: parse9f
int
parse9f(char *buf)
{
double temp_in, temp_out;
if (!sumcheck(buf, SIZE9F)) {
errlog(8, "Checksum failure for 9F block.");
return (-1);
}
temp_in = ((xDtoint(buf[2] & 0x07) * 100) + (DDtoint(buf[1]))) / 10;
if (buf[2] & 0x08) {
temp_in = -1.0 * temp_in;
}
temp_out = ((xDtoint(buf[17] & 0x07) * 100) + (DDtoint(buf[16]))) / 10;
if (buf[17] & 0x08) {
temp_out = -1.0 * temp_out;
}
if ((temp_out < -50.0) || (temp_in < -50.0)) return; /*Bad data*/
correct(temp_in, current_cal.temp_in_mul, current_cal.temp_in_offs);
correct(temp_out, current_cal.temp_out_mul, current_cal.temp_out_offs);
update(current_obs.temp_in, temp_in, TEMPIN);
update(current_obs.temp_out, temp_out, TEMPOUT);
errlog2(9, "Indoor temp: %gC, Outdoor temp: %gC", temp_in, temp_out);
}
开发者ID:glocklueng,项目名称:WeatherStation,代码行数:28,代码来源:parse.c
示例10: tr_fl
int tr_fl(int q_no)
{
char tf,ter;
if(q_no==4)
{
ques(4);
printf("\n\nAll metals are ductile.(t/f)");
printf("\n\nType \"t\" for TRUE\tor \"f\" for FALSE");
ter=check();
if(ter==14)
goto end;
flushall();
printf("\n\nYOUR OPINION:-\t");
scanf("%c",&tf);
if(tf=='f')
{
correct();
return 1;
}
else
printf("\n\n\a\aIT IS A FALSE STATEMENT");
getch();
}
if(q_no==6)
{
ques(6);
printf("\n\nUnicellular organisms have one celled body.(t/f)");
printf("\n\nType \"t\" for TRUE\tor \"f\" for FALSE");
ter=check();
if(ter==14)
goto end;
flushall();
printf("\n\nYOUR OPINION:-\t");
scanf("%c",&tf);
if(tf=='t')
{
correct();
return 1;
}
else
printf("\n\n\a\aIT IS A TRUE STATEMENT");
getch();
}
end:
return 0;
}
开发者ID:anirudhtomer,项目名称:UndergradCAssignments,代码行数:52,代码来源:DIVYA-PROJECT.C
示例11: parsecf
int
parsecf(char *buf)
{
double gust, avg, chill, hum_out;
double avg_dir, gust_dir;
if (!sumcheck(buf, SIZECF)) {
errlog(9, "Checksum failure for CF block.");
return (-1);
}
gust = ((xDtoint(buf[2]) * 100) + DDtoint(buf[1])) / 10;
gust_dir = (Dxtoint(buf[2])) + (DDtoint(buf[3]) * 10);
avg = ((xDtoint(buf[5]) * 100) + DDtoint(buf[4])) / 10;
avg_dir = (Dxtoint(buf[5])) + (DDtoint(buf[6]) * 10);
chill = DDtoint(buf[16]);
if (buf[21] & 0x20) {
chill = -1.0 * chill;
}
#if 0
pthread_mutex_lock(¤t_obs_lock);
if (((chill - current_obs.temp_out) > 0.5) && (avg > 0 || gust > 0)) {
chill = -1.0 * chill;
}
pthread_mutex_unlock(¤t_obs_lock);
#endif
correct(chill, current_cal.chill_mul, current_cal.chill_offs);
correct(gust, current_cal.gust_spd_mul, current_cal.gust_spd_offs);
correct(gust_dir, current_cal.gust_dir_mul, current_cal.gust_dir_offs);
correct(avg_dir, current_cal.wavg_dir_mul, current_cal.wavg_dir_offs);
gust_dir = (gust_dir < 0) ? 360 + ((int) gust_dir % 360) : (int) gust_dir % 360;
correct(avg, current_cal.wavg_spd_mul, current_cal.wavg_spd_offs);
avg_dir = (avg_dir < 0) ? 360 + ((int) avg_dir % 360) : (int) avg_dir % 360;
update(current_obs.gust, gust, GUST);
update(current_obs.wavg, avg, WAVG);
update(current_obs.gust_dir, gust_dir, GUSTDIR);
update(current_obs.wavg_dir, avg_dir, WAVGDIR);
update(current_obs.chill, chill, WCHILL);
errlog2(9, "Wind gust %g m/s, direction: %g", gust, gust_dir);
errlog2(9, "Wind avg %g m/s, direction: %g", avg, avg_dir);
errlog1(9, "Wind chill %g C", chill);
}
开发者ID:glocklueng,项目名称:WeatherStation,代码行数:51,代码来源:parse.c
示例12: ViWidget
ViMainCorrectionWidget::ViMainCorrectionWidget(QWidget *parent)
: ViWidget(parent)
{
mUi = new Ui::ViMainCorrectionWidget();
mUi->setupUi(this);
clear();
mUi->projectLoader->setTypeMode(ViProjectLoader::NoTypes);
QObject::connect(mUi->projectLoader, SIGNAL(finished()), this, SLOT(showContainer()));
QObject::connect(mUi->projectLoader, SIGNAL(projectChanged()), this, SLOT(showContainer()));
QObject::connect(mUi->projectLoader, SIGNAL(projectModeChanged()), this, SLOT(showContainer()));
//Button
QObject::connect(mUi->button, SIGNAL(clicked()), this, SLOT(correct()));
mUi->button->setIcon(ViThemeManager::icon("startprocess"), 40);
mUi->button->setText("Process");
mUi->button->setSize(140, 60);
//Label width
QString style = "QLabel { width: 140px; min-width: 140px; }";
mUi->projectLoader->setStyleSheet(style);
mUi->container->setStyleSheet(style);
// Correctors
mUi->correctorComboBox->addItems(mUi->correctionWidget->correctors());
QObject::connect(mUi->correctorComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(changeCorrector()));
changeCorrector();
// Mode
mUi->modeComboBox->addItems(ViCorrectionMode::modes());
mUi->modeComboBox->setCurrentText(ViCorrectionMode::defaultMode());
QObject::connect(mUi->modeComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(changeMode()));
changeMode();
}
开发者ID:EQ4,项目名称:Visore,代码行数:35,代码来源:vimaincorrectionwidget.cpp
示例13: psiThermo
Foam::twoPhaseMixtureThermo::twoPhaseMixtureThermo
(
const fvMesh& mesh
)
:
psiThermo(mesh, word::null),
twoPhaseMixture(mesh, *this),
thermo1_(NULL),
thermo2_(NULL)
{
{
volScalarField T1(IOobject::groupName("T", phase1Name()), T_);
T1.write();
}
{
volScalarField T2(IOobject::groupName("T", phase2Name()), T_);
T2.write();
}
thermo1_ = rhoThermo::New(mesh, phase1Name());
thermo2_ = rhoThermo::New(mesh, phase2Name());
thermo1_->validate(phase1Name(), "e");
thermo2_->validate(phase2Name(), "e");
correct();
}
开发者ID:OlegSutyrin,项目名称:OpenFOAM-3.0.x,代码行数:28,代码来源:twoPhaseMixtureThermo.C
示例14:
bool arlCore::FieldCorrector::correct( vnl_rigid_matrix &T ) const
{
vnl_rigid_matrix T0;
if(!correct(T, T0)) return false;
T.copy(T0);
return true;
}
开发者ID:corentindesfarges,项目名称:fw4spl,代码行数:7,代码来源:FieldCorrection.cpp
示例15: main
int main(int argc, const char *argv[]){
int n, i, j, k;
int count[20]={}, p[20]={};
char str[16];
word dict[SIZE], key;
wordptr list[SIZE];
for(n=0; gets(str), strcmp(str, "#"); ++n){
k = strlen(str);
++count[k];
strcpy(dict[n].str, str);
dict[n].len = k;
dict[n].rank = n;
}
for(i=1; i<18; ++i) p[i] = p[i-1]+count[i-1];
qsort(dict, n, sizeof(word), compar);
while(gets(str), strcmp(str, "#")){
strcpy(key.str, str);
key.len = strlen(str);
if(bsearch(&key, dict, n, sizeof(word), compar))
printf("%s is correct\n", str);
else{
printf("%s:", str);
for(i=p[key.len-1], j=0; i<p[key.len+2]; ++i)
if(correct(str, dict[i].str, key.len-dict[i].len))
list[j++] = (wordptr) {dict[i].str, dict[i].rank};
qsort(list, j, sizeof(wordptr), comparRank);
for(i=0; i<j; ++i) printf(" %s", list[i].str);
putchar('\n');
}
}
return 0;
}
开发者ID:0x7ffff,项目名称:POJ-archive,代码行数:34,代码来源:1035.c
示例16: motionDiff
// Construct from components
Foam::distortionEnergyDiff::distortionEnergyDiff
(
const tetMotionSolver& mSolver
)
:
motionDiff(mSolver),
motionGamma_
(
IOobject
(
"motionGamma",
tetMesh().time().timeName(),
tetMesh()(),
IOobject::NO_READ,
IOobject::NO_WRITE
),
tetMesh(),
dimensionedScalar("1.0", dimless, 1.0)
)
{
exponent_ = readInt(mSolver.lookup("diffusivityExponent"));
Info << "Value of exponent for distortion energy based motion diffusivity: "
<< exponent_ << endl;
mSolver.storeTotDisplacement();
correct();
}
开发者ID:CFMS,项目名称:foam-extend-foam-extend-3.2,代码行数:31,代码来源:distortionEnergyDiff.C
示例17: viscosityModel
Foam::viscosityModels::strainRateFunction::strainRateFunction
(
const word& name,
const dictionary& viscosityProperties,
const volVectorField& U,
const surfaceScalarField& phi
)
:
viscosityModel(name, viscosityProperties, U, phi),
strainRateFunctionCoeffs_
(
viscosityProperties.optionalSubDict(typeName + "Coeffs")
),
strainRateFunction_
(
Function1<scalar>::New("function", strainRateFunctionCoeffs_)
),
nu_
(
IOobject
(
name,
U_.time().timeName(),
U_.db(),
IOobject::NO_READ,
IOobject::AUTO_WRITE
),
U_.mesh(),
dimensionedScalar(name, dimViscosity, 0)
)
{
correct();
}
开发者ID:OpenFOAM,项目名称:OpenFOAM-dev,代码行数:33,代码来源:strainRateFunction.C
示例18: main
void main()
{
char i;
printf(" 欢迎进入电子与信息工程学院2011计算机2班通讯录系统\n");
printf("1:添加 2:查找 3:修改 4:删除 5:统计 6:打印 7:退出\n");
check();
i=getch();
while(1)
{
switch(i)
{
case '1':creat();break;
case '2':search();break;
case '3':correct();break;
case '4':del();break;
case '5':printf("通讯录共有%d人!\n",n); break;
case '6':print();;break;
case '7':esc();break;
default: printf("您的输入有误,请重新输入\n");
}
if(i=='7') break;
printf("1:添加 2:查找 3:修改 4:删除 5:统计 6:打印 7:退出\n");
i=getch();
}
}
开发者ID:master-cheng,项目名称:code-in-college,代码行数:29,代码来源:通讯录.c
示例19: correct
ErrorCorrectResult ErrorCorrectProcess::process(const SequenceWorkItem& workItem)
{
ErrorCorrectResult result = correct(workItem);
if(!result.kmerQC && !result.overlapQC && m_params.printOverlaps)
std::cout << workItem.read.id << " failed error correction QC\n";
return result;
}
开发者ID:nh13,项目名称:sga,代码行数:7,代码来源:ErrorCorrectProcess.cpp
示例20: sizeof
void virtual_random_access_iteratorTest::testString()
{
std::string source[100];
size_t num = sizeof(source) / sizeof(source[0]);
for (size_t i = 0; i < num; ++i)
{
std::ostringstream ostr;
ostr << "stringnumber:" << i;
source[i] = ostr.str();
}
std::random_shuffle(source, source + num);
{
std::vector<std::string> correct(source, source + num);
std::vector<std::string> test(source, source + num);
std::sort(correct.begin(), correct.end());
vsorts(test.begin(), test.end());
CPPUNIT_ASSERT(correct == test);
}
{
std::string *correct = new std::string[num];
std::string *test = new std::string[num];
std::copy(source, source + num, correct);
std::copy(source, source + num, test);
std::sort(correct, correct + num);
vsorts(test, test + num);
CPPUNIT_ASSERT(std::equal(correct, correct + num, test));
delete [] correct;
delete [] test;
}
}
开发者ID:data9824,项目名称:virtual_iterator,代码行数:30,代码来源:virtual_random_access_iteratorTest.cpp
注:本文中的correct函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论