本文整理汇总了C++中cputc函数的典型用法代码示例。如果您正苦于以下问题:C++ cputc函数的具体用法?C++ cputc怎么用?C++ cputc使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了cputc函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: update_data
void update_data(void){
unit++;
lastime++;
if (unit >= Freq){
unit = 0;
cnt = cnt + 1 ;
if (cnt >= 9){
cnt = 0;
level ++;
}
if (level < 10) cputint(level, 7, 30, white);
else cputint(level, 7, 29, white);
sec++;
if (sec >= 60){
sec = 0;
min++;
}
if (min < 10){
cputc('0', 10, 27, white);
cputint(min, 10, 28, white);
}
else cputint(min, 10, 27, white);
cputc(':', 10, 29, white);
if (sec < 10){
cputc('0', 10, 30, white);
cputc(sec+'0', 10, 31, white);
}
else cputint(sec, 10, 30, white);
}
}
开发者ID:archeart,项目名称:Game-Downstairs,代码行数:34,代码来源:game.c
示例2: code
/* the only characters that have special meaning in a code block are
* `<' and `&' , which are /always/ expanded to < and &
*/
static void
code(int escape, MMIOT *f)
{
int c;
if ( escape && (peek(f,1) == ' ') )
shift(f,1);
while ( (c = pull(f)) != EOF ) {
switch (c) {
case ' ': if ( peek(f,1) == '`' && endofcode(escape, 1, f) )
return;
Qchar(c, f);
break;
case '`': if ( endofcode(escape, 0, f) )
return;
Qchar(c, f);
break;
case '\\': cputc(c, f);
if ( peek(f,1) == '>' || (c = pull(f)) == EOF )
break;
default: cputc(c, f);
break;
}
}
} /* code */
开发者ID:gensym,项目名称:markdownlive,代码行数:32,代码来源:generate.c
示例3: drawBox
void __fastcall drawBox(
unsigned char x,
unsigned char y,
unsigned char w,
unsigned char h,
unsigned char color,
unsigned reverse)
{
unsigned char i;
//textcolor(color);
revers(reverse);
// draw frame
#ifdef __APPLE2ENH__
textframexy(x, y, w + 1, h + 1, TEXTFRAME_TALL);
#else
for(i=x+w-1; i>x; i--)
{
gotoxy(i, y); cputc('-');
gotoxy(i, y+h); cputc('-');
}
for(i=y+h-1; i>y; i--)
{
gotoxy(x, i); cputc('!');
if(x+w < size_x)
gotoxy(x+w, i); cputc('!');
}
#endif
// draw body
for(i=y+1; i<y+h; ++i)
{
cclearxy(x + 1, i, w - 1);
}
}
开发者ID:A2Command,项目名称:a2command,代码行数:35,代码来源:screen.c
示例4: main
int main (void)
{
unsigned char XSize, YSize;
/* Set screen colors */
(void) textcolor (COLOR_WHITE);
(void) bordercolor (COLOR_BLACK);
(void) bgcolor (COLOR_BLACK);
/* Clear the screen, put cursor in upper left corner */
clrscr ();
/* Ask for the screen size */
screensize (&XSize, &YSize);
/* Draw a border around the screen */
/* Top line */
cputc (CH_ULCORNER);
chline (XSize - 2);
cputc (CH_URCORNER);
/* Vertical line, left side */
cvlinexy (0, 1, YSize - 2);
/* Bottom line */
cputc (CH_LLCORNER);
chline (XSize - 2);
cputc (CH_LRCORNER);
/* Vertical line, right side */
cvlinexy (XSize - 1, 1, YSize - 2);
/* Write the greeting in the mid of the screen */
gotoxy ((XSize - strlen (Text)) / 2, YSize / 2);
cprintf ("%s", Text);
#if defined(__NES__) || defined(__PCE__) || defined(__GAMATE__) || defined(__ATARI5200__)
/* Wait for the user to press a button */
joy_install (joy_static_stddrv);
while (!joy_read (JOY_1)) ;
joy_uninstall ();
#else
/* Wait for the user to press a key */
cgetc ();
#endif
/* Clear the screen again */
clrscr ();
/* Done */
return EXIT_SUCCESS;
}
开发者ID:cc65,项目名称:cc65,代码行数:57,代码来源:hello.c
示例5: DrawFrame
static void DrawFrame (register FrameDesc* F, char Active)
/* Draw one window frame */
{
TextDesc* T;
unsigned char Count;
unsigned char tl, tr, bl, br;
unsigned char x1, y1, width;
unsigned char OldColor;
/* Determine the characters for the corners, set frame color */
if (Active) {
OldColor = textcolor (COLOR_FRAMEHIGH);
tl = CH_ULCORNER;
tr = CH_URCORNER;
bl = CH_LLCORNER;
br = CH_LRCORNER;
} else {
OldColor = textcolor (COLOR_FRAMELOW);
tl = F->fd_tl;
tr = F->fd_tr;
bl = F->fd_bl;
br = F->fd_br;
}
/* Get the coordinates into locals for faster access */
x1 = F->fd_x1;
y1 = F->fd_y1;
width = F->fd_width;
/* Top line */
cputcxy (x1, y1, tl);
chline (width);
cputc (tr);
/* Left line */
cvlinexy (x1, ++y1, F->fd_height);
/* Bottom line */
cputc (bl);
chline (width);
cputc (br);
/* Right line */
cvlinexy (F->fd_x2, y1, F->fd_height);
/* If the window has static text associated, print the text */
(void) textcolor (COLOR_TEXTLOW);
Count = F->fd_textcount;
T = F->fd_text;
while (Count--) {
cputsxy (x1 + T->x, y1 + T->y, T->text);
++T;
}
/* Set the old color */
(void) textcolor (OldColor);
}
开发者ID:AntiheroSoftware,项目名称:cc65,代码行数:57,代码来源:dbg.c
示例6: fmt_print
// helper function to put the string out - string will be modified and is
// expected to be 256 chars in length
int fmt_print(char *s, int zero, int width, int left, int precis, int plus) {
int cnt = 0;
int i = strlen(s);
int pad = ' ';
if (zero) pad = '0';
if ((precis > 0) && (i >= precis)) {
i = precis;
if (plus) --i;
}
if ((plus) && (width > 0)) --width;
if (width <= 0) {
if (plus) {
cputc('+');
++cnt;
}
for (int idx=0; idx<i; ++idx) {
cputc(*(s++));
++cnt;
}
} else {
if (left) {
if (plus) {
cputc('+');
++cnt;
}
for (int idx=0; idx<i; ++idx) {
cputc(*(s++));
++cnt;
}
for (int idx=0; idx<width-i; ++idx) {
cputc(' ');
++cnt;
}
} else {
if ((plus)&&(zero)) {
cputc('+');
plus = 0;
++cnt;
}
for (int idx=0; idx<width-i; ++idx) {
cputc(pad);
++cnt;
}
if (plus) {
cputc('+');
++cnt;
}
for (int idx=0; idx<i; ++idx) {
cputc(*(s++));
++cnt;
}
}
}
return cnt;
}
开发者ID:tursilion,项目名称:libti99,代码行数:58,代码来源:conio_cprintf.c
示例7: stack_size
void
stack_size(void)
{
static unsigned char *c;
static unsigned int s;
c = (unsigned char *)(0xBF00 - STACK_SIZE);
while(*c++ == 0xA2) {
}
s = (unsigned char *)0xBF00 - c;
clrscr();
cputc('0' + s / 100 % 10);
cputc('0' + s / 10 % 10);
cputc('0' + s % 10);
cgetc();
}
开发者ID:ZhepingYang,项目名称:contiki-1.x,代码行数:15,代码来源:main.c
示例8: testCPeekC
/* test which outputs every possible char, reads it back
** from screen memory, outputs again at the next char position
** and compares the two screen memory bytes on identity
*/
int testCPeekC(char ch){
/* Test the given charcode on special characters NEWLINE,LINEFEED and
** TAB
*/
if ( ('\n' !=ch) && ('\r' !=ch) && ('\t' != ch) ){
/* go on if not special char according to prev comment */
unsigned char ch2_a, ch2_b;
/* output char to the screen */
cputc(ch);
/* move cursorpos to previous output */
chBack();
/* get back written char including the translation scrcode->asc */
ch2_a = cpeekc();
/* get back written char without translation */
ch2_b = peekChWithoutTranslation();
/* move cursor to following writing position */
chForth();
/* output again the char which was read back by cpeekc */
cputc(ch2_a);
/* move cursorpos to previous output */
chBack();
/* get back second written char without translation and compare it to
** the previously written char without translation
*/
if ( peekChWithoutTranslation() == ch2_b ){
/* test succesful
* move cursor to following writing position
*/
chForth();
return EXIT_SUCCESS;
}
/* test NOT succesful
** output diagnostic and return FAILURE
*/
cprintf("\n\rError on char: 0x%x. was 0x%x instead", ch, ch2_a);
return EXIT_FAILURE;
}
cputc('.');
cputc('.');
return EXIT_SUCCESS;
}
开发者ID:MonteCarlos,项目名称:cc65,代码行数:52,代码来源:cpeekc.c
示例9: renderMenu
void renderMenu(uint8_t current) {
uint8_t idx = 0;
textcolor(1);
revers(1);
gotoxy(0, 0);
for (idx = 0; idx < menuSize; idx++) {
if (idx == current) {
textcolor(3);
cputs(menu[idx]);
/*****************/
cputsxy(0, 1, "\xf0\xc0\xc0\xc0\xc0\xee");
gotoxy(0, 2);
cprintf("\xdd%s\xdd", fileMenu[0]);
gotoxy(0, 3);
cprintf("\xdd%s\xdd", fileMenu[1]);
gotoxy(0, 4);
cprintf("\xdd%s\xdd", fileMenu[2]);
gotoxy(0, 5);
cprintf("\xdd%s\xdd", fileMenu[3]);
cputsxy(0, 6, "\xed\xc0\xc0\xc0\xc0\xfd");
/*****************/
} else {
cputs(menu[idx]);
}
textcolor(1);
cputs(" ");
}
for (idx = wherex(); idx < 40; idx++) {
cputc(' ');
}
}
开发者ID:afester,项目名称:CodeSamples,代码行数:34,代码来源:main.c
示例10: main
int main() {
clrscr();
bordercolor(0);
bgcolor(6);
renderMenu(100);
textcolor(7);
gotoxy(0, 1);
updateStatus(' ');
cursor(1);
while(1) {
char c;
/*
uint8_t row;
uint8_t col;
for (row = 0; row < 16; row++) {
gotoxy(0, row + 3);
cprintf("%3d ", row * 16);
for (col = 0; col < 16; col++) {
cputc(row * 16 + col);
cputc(' ');
}
}
*/
c = cgetc();
if (c == 20) {
// backspace
} else if (c == 13) {
// Return
} else if (c == 157) {
// Left
uint8_t xpos = wherex() - 1;
gotox(xpos);
} else if (c == 29) {
// Right
uint8_t xpos = wherex() + 1;
gotox(xpos);
} else if (c == 17) {
// Down
uint8_t ypos = wherey() + 1;
gotoy(ypos);
} else if (c == 145) {
// Up
uint8_t ypos = wherey() - 1;
gotoy(ypos);
} else if (c == 19) {
// Pos1
} else if (c == 3) {
// ESC -> Menu
processMenu();
} else {
cputc(c);
}
updateStatus(c);
}
}
开发者ID:afester,项目名称:CodeSamples,代码行数:60,代码来源:main.c
示例11: get_input_terminated_by
/*
* get_input_terminated_by() reads input (handling backspace correctly) until
* a terminator of |terminators| is encountered or |out| is full (outlen-1
* characters were read).
*
* get_input_terminated_by() returns the terminator it encountered.
*
*/
input_terminator_t get_input_terminated_by(input_terminator_mask_t terminators, char *out, BYTE outlen) {
BYTE i = strlen(out);
BYTE c, x, y;
x = wherex() - i;
y = wherey();
while (1) {
c = cgetc();
if (((terminators & INPUT_TERMINATOR_RETURN) == INPUT_TERMINATOR_RETURN) && (c == PETSCII_CR)) {
return INPUT_TERMINATOR_RETURN;
} else if (((terminators & INPUT_TERMINATOR_SPACE) == INPUT_TERMINATOR_SPACE) && (c == PETSCII_SP)) {
return INPUT_TERMINATOR_SPACE;
} else if (c == PETSCII_DEL) {
/* If you are at the left-most position, do nothing */
if (i == 0)
continue;
out[--i] = '\0';
cputcxy(x+i, y, ' ');
gotoxy(x+i, y);
continue;
}
if (i == (outlen-1)) {
continue;
}
cputc(c);
out[i++] = c;
}
}
开发者ID:nnev,项目名称:c128-kasse,代码行数:35,代码来源:general.c
示例12: ctk_draw_menus
/*-----------------------------------------------------------------------------------*/
void
ctk_draw_menus(struct ctk_menus *menus)
{
struct ctk_menu *m;
/* Draw menus */
(void)textcolor(MENUCOLOR);
gotoxy(0, 0);
revers(1);
cputc(' ');
for(m = menus->menus->next; m != NULL; m = m->next) {
draw_menu(m, m == menus->open);
}
/* Draw desktopmenu */
if(wherex() + strlen(menus->desktopmenu->title) + 1 >= sizex) {
gotoxy(sizex - (unsigned char)strlen(menus->desktopmenu->title) - 1, 0);
} else {
cclear(sizex - wherex() -
(unsigned char)strlen(menus->desktopmenu->title) - 1);
}
draw_menu(menus->desktopmenu, menus->desktopmenu == menus->open);
revers(0);
}
开发者ID:Inscribe,项目名称:msp430xf1611,代码行数:26,代码来源:ctk-conio.c
示例13: cputs
char *interactively_read_line(const char *prompt)
{
const char DELETE = '\x7f';
const char BACKSPACE = '\x08';
bool line_is_complete = false;
char c;
size_t count = 0;
cputs(prompt);
while (! line_is_complete) {
c = interactively_read_char();
if (count > 0 && (c == DELETE || c == BACKSPACE)) {
erase_backward(1);
count--;
}
else if (c == '\r') {
line[count] = '\0';
line_is_complete = true;
}
else if (count < LINE_CAPACITY - 1) {
cputc(c);
line[count++] = c;
}
else {
line[count] = '\0';
line_is_complete = true;
}
}
cputs("\r\n");
return line;
}
开发者ID:gungwald,项目名称:posix-6502,代码行数:32,代码来源:more.c
示例14: draw_menu
void draw_menu(struct ctk_menu *m, struct ctk_menu *open) {
#if CC_CONF_UNSIGNED_CHAR_BUGS
unsigned char x2;
unsigned int x, y;
#else
unsigned char x2;
unsigned char x, y;
#endif
x = cursx;
cputs(m->title);
cputc(CH_SPACE);
if (m == open) {
x2 = cursx;
if(x + CTK_CONF_MENUWIDTH > SCREEN_WIDTH) {
x = SCREEN_WIDTH - CTK_CONF_MENUWIDTH;
}
for(y = 0; y < m->nitems; y++) {
if(y == m->active) {
revers(0);
}
gotoxy(x, y + 1);
if(m->items[y].title[0] == '-') {
chline(CTK_CONF_MENUWIDTH);
} else {
cputs(m->items[y].title);
}
clearTo(x + CTK_CONF_MENUWIDTH);
revers(1);
}
gotoxy(x2, 0);
}
}
开发者ID:AlphaBetaPhi,项目名称:contiki,代码行数:34,代码来源:ctk-conio_arch-source.c
示例15: cputsn
/*---------------------------------------------------------------------------*/
void cputsn(char *str, unsigned char len) {
while ((len > 0) && (*str != 0)) {
cputc(*str);
str++;
len--;
}
}
开发者ID:AlphaBetaPhi,项目名称:contiki,代码行数:8,代码来源:ctk-conio_arch-source.c
示例16: cclear
/* Clear part of a line (write length spaces). */
void __fastcall__ cclear( unsigned char length )
{
while( length )
{
cputc( ' ' );
--length;
}
}
开发者ID:Arkuda,项目名称:rpc8e-cc65,代码行数:9,代码来源:conio.c
示例17: interactively_read_char
char interactively_read_char()
{
unsigned char x;
char c;
x = wherex();
revers(true);
cputc(' ');
gotox(x);
c = cgetc();
revers(false);
cputc(' ');
gotox(x);
return c;
}
开发者ID:gungwald,项目名称:posix-6502,代码行数:17,代码来源:more.c
示例18: cvline
void cvline(unsigned char length) {
while (length > 0) {
cputc(CH_VERTLINE);
++cursy;
--cursx;
length--;
}
}
开发者ID:AlphaBetaPhi,项目名称:contiki,代码行数:8,代码来源:ctk-conio_arch-source.c
示例19: platform_dputc
void platform_dputc(char c)
{
#if WITH_CGA_CONSOLE
cputc(c);
#else
uart_putc(c);
#endif
}
开发者ID:ArthurMurata,项目名称:lk,代码行数:8,代码来源:debug.c
示例20: print_nibble
void print_nibble(U8 val)
{
static const U8 hextab[] = {
0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
0x41, 0x42, 0x43, 0x44, 0x45, 0x46
};
cputc(hextab[val]);
}
开发者ID:MonteCarlos,项目名称:kweeca,代码行数:8,代码来源:print.c
注:本文中的cputc函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论