• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ dm_register函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中dm_register函数的典型用法代码示例。如果您正苦于以下问题：C++ dm_register函数的具体用法？C++ dm_register怎么用？C++ dm_register使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了dm_register函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int main( void )
{
  FILE* fp;

  // Initialize platform first
  if( platform_init() != PLATFORM_OK )
  {
    // This should never happen
    while( 1 );
  }

  // Initialize device manager
  dm_init();

  // Register the ROM filesystem
  dm_register( romfs_init() );

  // Register the MMC filesystem
  dm_register( mmcfs_init() );

  // Register the remote filesystem
  dm_register( remotefs_init() );

  // Autorun: if "autorun.lua" is found in the file system, run it first
  if( ( fp = fopen( FS_AUTORUN, "r" ) ) != NULL )
  {
    fclose( fp );
    char* lua_argv[] = { "lua", FS_AUTORUN, NULL };
    lua_main( 2, lua_argv );
  }
  
#ifdef ELUA_BOOT_RPC
  boot_rpc();
#else
  
  // Run the shell
  if( shell_init() == 0 )
  {
    printf( "Unable to initialize the eLua shell!\n" );
    // Start Lua directly
    char* lua_argv[] = { "lua", NULL };
    lua_main( 1, lua_argv );
  }
  else
    shell_start();
#endif // #ifdef ELUA_BOOT_RPC

#ifdef ELUA_SIMULATOR
  hostif_exit(0);
  return 0;
#else
  while( 1 );
#endif
}
开发者ID:BackupTheBerlios，项目名称:elua-svn，代码行数:54，代码来源:main.c


示例2: main

int main( void )
{
    int i;
    FILE* fp;

    // Initialize platform first
    if( platform_init() != PLATFORM_OK )
    {
        // This should never happen
        while( 1 );
    }

    // Initialize device manager
    dm_init();

    // Register the ROM filesystem
    dm_register( romfs_init() );

    // Register the MMC filesystem
    dm_register( mmcfs_init() );

    // Register the Semihosting filesystem
    dm_register( semifs_init() );

    // Search for autorun files in the defined order and execute the 1st if found
    for( i = 0; i < sizeof( boot_order ) / sizeof( *boot_order ); i++ )
    {
        if( ( fp = fopen( boot_order[ i ], "r" ) ) != NULL )
        {
            fclose( fp );
            char* picoc_argv[] = { "picoc", boot_order[i], NULL };
            picoc_main( 2, picoc_argv );
            break; // autoruns only the first found
        }
    }

    // Run the shell
    if( shell_init() == 0 )
    {
        // Start picoc directly
        char* picoc_argv[] = { "picoc", NULL };
        picoc_main( 1, picoc_argv );
    }
    else
        shell_start();

    while( 1 );
}
开发者ID:fjrti，项目名称:remix，代码行数:48，代码来源:main.c


示例3: main

// ****************************************************************************
//  Program entry point
int main (void)
{
  // Initialize platform first
  if( platform_init() != PLATFORM_OK )
  {
    // This should never happen
    while( 1 );
  }
    
  // Initialize device manager
  dm_init();
  
  // And register the ROM filesystem
  dm_register( fs_init() );  
  
  // Initialize XMODEM
  xmodem_init( xmodem_send, xmodem_recv );    
  
  printf( ".text ends at %p, first free RAM is at %p, last free ram is at %p\r\n", etext, platform_get_first_free_ram(), platform_get_last_free_ram() );
  
  // Run the shell
  if( shell_init( XMODEM_MAX_FILE_SIZE ) == 0 )
    printf( "Unable to initialize shell!\n" );
  else
    shell_start();
    
  while( 1 );
}
开发者ID:BackupTheBerlios，项目名称:elua-svn，代码行数:30，代码来源:main.c


示例4: device_manager_init

/**@brief Function for the Device Manager initialization.
 */
static void device_manager_init(void)
{
    uint32_t                err_code;
    dm_init_param_t         init_data;
    dm_application_param_t  register_param;

    // Initialize persistent storage module.
    err_code = pstorage_init();
    APP_ERROR_CHECK(err_code);

    // Clear all bonded centrals if the "delete all bonds" button is pushed.
    err_code = bsp_button_is_pressed(BOND_DELETE_ALL_WAKEUP_BUTTON_ID,&(init_data.clear_persistent_data));
    APP_ERROR_CHECK(err_code);
	
    err_code = dm_init(&init_data);
    APP_ERROR_CHECK(err_code);
    
    memset(&register_param.sec_param, 0, sizeof(ble_gap_sec_params_t));

    register_param.sec_param.timeout      = SEC_PARAM_TIMEOUT;
    register_param.sec_param.bond         = SEC_PARAM_BOND;
    register_param.sec_param.mitm         = SEC_PARAM_MITM;
    register_param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    register_param.sec_param.oob          = SEC_PARAM_OOB;
    register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    register_param.evt_handler            = device_manager_evt_handler;
    register_param.service_type           = DM_PROTOCOL_CNTXT_GATT_SRVR_ID;

    err_code = dm_register(&m_app_handle, &register_param);
    APP_ERROR_CHECK(err_code);
}
开发者ID:451506709，项目名称:automated_machine，代码行数:34，代码来源:main.c


示例5: device_manager_init

/**@brief Function for the Device Manager initialization.
 *
 * @param[in] erase_bonds  Indicates whether bonding information should be cleared from
 *                         persistent storage during initialization of the Device Manager.
 */
static void device_manager_init(bool erase_bonds)
{
    uint32_t               err_code;
    dm_init_param_t        init_param = {.clear_persistent_data = erase_bonds};
    dm_application_param_t register_param;

    err_code = pstorage_init();
    APP_ERROR_CHECK(err_code);

    err_code = dm_init(&init_param);
    APP_ERROR_CHECK(err_code);

    memset(&register_param.sec_param, 0, sizeof (ble_gap_sec_params_t));

    // Event handler to be registered with the module.
    register_param.evt_handler            = device_manager_event_handler;

    // Service or protocol context for device manager to load, store and apply on behalf of application.
    // Here set to client as application is a GATT client.
    register_param.service_type           = DM_PROTOCOL_CNTXT_GATT_CLI_ID;

    // Secuirty parameters to be used for security procedures.
    register_param.sec_param.bond         = SEC_PARAM_BOND;
    register_param.sec_param.mitm         = SEC_PARAM_MITM;
    register_param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    register_param.sec_param.oob          = SEC_PARAM_OOB;
    register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    register_param.sec_param.kdist_periph.enc = 1;
    register_param.sec_param.kdist_periph.id  = 1;

    err_code = dm_register(&m_dm_app_id, &register_param);
    APP_ERROR_CHECK(err_code);
}
开发者ID:451506709，项目名称:automated_machine，代码行数:39，代码来源:main.c


示例6: device_manager_init

/**@brief Function for the Device Manager initialization.
 *
 * @param[in] erase_bonds  Indicates whether bonding information should be cleared from
 *                         persistent storage during initialization of the Device Manager.
 */
static void device_manager_init(bool erase_bonds)
{
    uint32_t               err_code;
    dm_init_param_t        init_param = {.clear_persistent_data = erase_bonds};
    dm_application_param_t register_param;

    // Initialize persistent storage module.
    err_code = pstorage_init();
    APP_ERROR_CHECK(err_code);

    err_code = dm_init(&init_param);
    APP_ERROR_CHECK(err_code);

    memset(&register_param.sec_param, 0, sizeof(ble_gap_sec_params_t));
    
    register_param.sec_param.bond         = SEC_PARAM_BOND;
    register_param.sec_param.mitm         = SEC_PARAM_MITM;
    register_param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    register_param.sec_param.oob          = SEC_PARAM_OOB;
    register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    register_param.evt_handler            = device_manager_evt_handler;
    register_param.service_type           = DM_PROTOCOL_CNTXT_GATT_SRVR_ID;

    err_code = dm_register(&m_app_handle, &register_param);
    APP_ERROR_CHECK(err_code);
}
开发者ID:RobinLin，项目名称:Espruino，代码行数:32，代码来源:main.c


示例7: mmcfs_init

int mmcfs_init()
{
  // Mount the MMC file system using logical disk 0
  if ( f_mount( 0, &mmc_fs ) != FR_OK )
    return DM_ERR_INIT;
  return dm_register( "/mmc", NULL, &mmcfs_device );
}
开发者ID:LeVinh4694，项目名称:Cheerlights，代码行数:7，代码来源:mmcfs.c


示例8: device_manager_init

/**@brief Function for the Device Manager initialization.
 */
static void device_manager_init(void)
{
    uint32_t                err_code;
    dm_init_param_t         init_data;
    dm_application_param_t  register_param;

    // Initialize persistent storage module.
    err_code = pstorage_init();
    APP_ERROR_CHECK(err_code);

    // Clear all bonded centrals if the Bonds Delete button is pushed.
    init_data.clear_persistent_data = true;//(nrf_gpio_pin_read(BOND_DELETE_ALL_BUTTON_ID) == 0);

    err_code = dm_init(&init_data);
    APP_ERROR_CHECK(err_code);

    memset(&register_param.sec_param, 0, sizeof(ble_gap_sec_params_t));

    //register_param.sec_param.timeout      = SEC_PARAM_TIMEOUT;
    register_param.sec_param.bond         = SEC_PARAM_BOND;
    register_param.sec_param.mitm         = SEC_PARAM_MITM;
    register_param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    register_param.sec_param.oob          = SEC_PARAM_OOB;
    register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    register_param.evt_handler            = device_manager_evt_handler;
    register_param.service_type           = DM_PROTOCOL_CNTXT_NONE;

    err_code = dm_register(&g_AppHandle, &register_param);
    APP_ERROR_CHECK(err_code);
}
开发者ID:I-SYST，项目名称:EHAL，代码行数:33，代码来源:LMXDisplayBleMain.c


示例9: device_manager_init

/**@brief Function for the Device Manager initialization.
 *
 * @param[in] erase_bonds  Indicates whether bonding information should be cleared from
 *                         persistent storage during initialization of the Device Manager.
 */
static void device_manager_init(bool erase_bonds)
{
    uint32_t               err_code;
    dm_init_param_t        init_param = {.clear_persistent_data = erase_bonds};
    dm_application_param_t register_param;

    // Initialize persistent storage module.
    err_code = pstorage_init();
    APP_ERROR_CHECK(err_code);

    err_code = dm_init(&init_param);
    APP_ERROR_CHECK(err_code);

    memset(&register_param.sec_param, 0, sizeof(ble_gap_sec_params_t));

    register_param.sec_param.bond         = SEC_PARAM_BOND;
    register_param.sec_param.mitm         = SEC_PARAM_MITM;
    register_param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    register_param.sec_param.oob          = SEC_PARAM_OOB;
    register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    register_param.evt_handler            = device_manager_evt_handler;
    register_param.service_type           = DM_PROTOCOL_CNTXT_GATT_SRVR_ID;

    err_code = dm_register(&m_app_handle, &register_param);
    APP_ERROR_CHECK(err_code);
    
    app_bond_init(&m_app_bond_table);
    
    for(uint8_t i = 0; i < DEVICE_MANAGER_MAX_BONDS; i++)
    {
        APP_LOG("[APP][ID: %d], Application context : %08X\r\n",m_app_bond_table.device_id[i],(unsigned int) m_app_bond_table.app_bond_cnt[i]);
    }
}
开发者ID:hshd123，项目名称:nRF51-ble-peripheral-bond-handling，代码行数:39，代码来源:main.c


示例10: dm_init

// Initialize device manager
// This initializes the standard descriptors (stdin, stdout, stderr)
// At this point it is assumed that the std device (usually UART) is already initialized
int dm_init() 
{
  dm_register( std_get_desc() );
#ifndef BUILD_CON_TCP         // we need buffering on stdout for console over TCP
  setbuf( stdout, NULL );
#endif
  return DM_OK;
}
开发者ID:BackupTheBerlios，项目名称:elua-svn，代码行数:11，代码来源:devman.c


示例11: main

int main( void )
{
    FILE* fp;

    // Initialize platform first
    if( platform_init() != PLATFORM_OK )
    {
        // This should never happen
        while( 1 );
    }

    // Initialize device manager
    dm_init();

    // Register the ROM filesystem
    dm_register( romfs_init() );

#ifdef BUILD_XMODEM
    // Initialize XMODEM
    xmodem_init( xmodem_send, xmodem_recv );
#endif

#ifdef BUILD_TERM
    // Initialize terminal
    term_init( TERM_LINES, TERM_COLS, term_out, term_in, term_translate );
#endif

    // Autorun: if "autorun.lua" is found in the ROM file system, run it first
    if( ( fp = fopen( "/rom/autorun.lua", "r" ) ) != NULL )
    {
        fclose( fp );
        char* lua_argv[] = { "lua", "/rom/autorun.lua", NULL };
        lua_main( 2, lua_argv );
    }

    // Run the shell
    if( shell_init() == 0 )
    {
        printf( "Unable to initialize the eLua shell!\n" );
        // Start Lua directly
        char* lua_argv[] = { "lua", NULL };
        lua_main( 1, lua_argv );
    }
    else
        shell_start();

    while( 1 );
}
开发者ID:BackupTheBerlios，项目名称:elua-svn，代码行数:48，代码来源:main.c


示例12: device_manager_init

/**@brief Function for the Device Manager initialization.
 *
 * @param[in] erase_bonds  Indicates whether bonding information should be cleared from
 *                         persistent storage during initialization of the Device Manager.
 */
static void device_manager_init(bool erase_bonds)
{
    uint32_t               err_code;
    dm_init_param_t        init_param = {.clear_persistent_data = erase_bonds};
    dm_application_param_t  register_param;
    
    // Initialize persistent storage module.
    err_code = pstorage_init();
    if (err_code == NRF_SUCCESS)
			debug_printf("Persistent storage module is ready!\r\n");
		else
		{
			debug_printf("Ooops.. Something went wrong with initialising the PS module..\r\n");
			APP_ERROR_CHECK(err_code);
		}
    
		err_code = dm_init(&init_param);
    if (err_code == NRF_SUCCESS)
			debug_printf("DM initialised!\r\n");
		else
		{
			debug_printf("Ooops.. Something went wrong with initialising the DM..\r\n");
			APP_ERROR_CHECK(err_code);
		}
    
		memset(&register_param.sec_param, 0, sizeof(ble_gap_sec_params_t));
    
    register_param.sec_param.bond         = SEC_PARAM_BOND;
    register_param.sec_param.mitm         = SEC_PARAM_MITM;
    register_param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    register_param.sec_param.oob          = SEC_PARAM_OOB;
    register_param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    register_param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    register_param.evt_handler            = device_manager_evt_handler;
    register_param.service_type           = DM_PROTOCOL_CNTXT_GATT_SRVR_ID;

    err_code = dm_register(&m_app_handle, &register_param);
    if (err_code == NRF_SUCCESS)
			debug_printf("Registered parameters for DM!\r\n");
		else
		{
			debug_printf("Ooops.. Something went wrong with registering the parameters for the DM..\r\n");
			APP_ERROR_CHECK(err_code);
		}
}
开发者ID:stelios26，项目名称:Aphrodite，代码行数:50，代码来源:main.c


示例13: device_manager_init

/**@brief Function for initializing the Device Manager.
 *
 * @details Device manager is initialized here.
 */
static void device_manager_init(void)
{
    dm_application_param_t param;
    dm_init_param_t        init_param;

    uint32_t err_code;

    err_code = pstorage_init();
    APP_ERROR_CHECK(err_code);

	  init_param.clear_persistent_data = false;

#ifdef BOND_DELETE_ALL_BUTTON_PIN
    // Clear all bonded devices if user requests to.
    init_param.clear_persistent_data =
        ((nrf_gpio_pin_read(BOND_DELETE_ALL_BUTTON_PIN) == 0)? true: false);
#endif
	
    err_code = dm_init(&init_param);
    APP_ERROR_CHECK(err_code);

    memset(&param.sec_param, 0, sizeof (ble_gap_sec_params_t));

    // Event handler to be registered with the module.
    param.evt_handler            = device_manager_event_handler;

    // Service or protocol context for device manager to load, store and apply on behalf of application.
    // Here set to client as application is a GATT client.
    param.service_type           = DM_PROTOCOL_CNTXT_GATT_CLI_ID;

    // Secuirty parameters to be used for security procedures.
    param.sec_param.bond         = SEC_PARAM_BOND;
    param.sec_param.mitm         = SEC_PARAM_MITM;
    param.sec_param.io_caps      = SEC_PARAM_IO_CAPABILITIES;
    param.sec_param.oob          = SEC_PARAM_OOB;
    param.sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
    param.sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
    param.sec_param.kdist_periph.enc = 1;
    param.sec_param.kdist_periph.id  = 1;

    err_code = dm_register(&m_dm_app_id,&param);
    APP_ERROR_CHECK(err_code);
}
开发者ID:451506709，项目名称:automated_machine，代码行数:47，代码来源:main.c


示例14: main

int main( void )
{
    // Initialize platform first
    if( platform_init() != PLATFORM_OK )
    {
        // This should never happen
        while( 1 );
    }

    // Initialize the TLSF allocator
    // (if TLSF is not used, the next function does nothing)
    tlsf_elua_init();

    // Initialize device manager
    dm_init();

    // Register the ROM filesystem
    dm_register( romfs_init() );

    // Initialize XMODEM
    xmodem_init( xmodem_send, xmodem_recv );

    // Initialize terminal
    term_init( TERMINAL_LINES, TERMINAL_COLS, term_out, term_in, term_translate );

    printf( ".text ends at %p\n", etext );

    // Run the shell
    if( shell_init( XMODEM_MAX_FILE_SIZE ) == 0 )
    {
        printf( "Unable to initialize the eLua shell!\n" );
        // Start Lua directly
        char* lua_argv[] = { "lua", NULL };
        lua_main( 1, lua_argv );
    }
    else
        shell_start();

    while( 1 );
}
开发者ID:BackupTheBerlios，项目名称:elua-svn，代码行数:40，代码来源:main.c


示例15: main

int main( void )
{
  // Initialize platform first
  if( platform_init() != PLATFORM_OK )
  {
    // This should never happen
    while( 1 );
  }
    
  // Initialize device manager
  dm_init();
  
  // Register the ROM filesystem
  dm_register( romfs_init() );  
  
  // Initialize XMODEM
  xmodem_init( xmodem_send, xmodem_recv );    
  
  // Initialize terminal
  term_init( TERMINAL_LINES, TERMINAL_COLS, term_out, term_in, term_translate );
  
  printf( ".text ends at %p, first free RAM is at %p, last free ram is at %p\r\n", etext, platform_get_first_free_ram(), platform_get_last_free_ram() );
  
  // Run the shell
  if( shell_init( XMODEM_MAX_FILE_SIZE ) == 0 )
  {
    printf( "Unable to initialize the eLua shell!\n" );
    // Start Lua directly
    char* lua_argv[] = { "lua", NULL };
    lua_main( 1, lua_argv );
  }
  else
    shell_start();

  while( 1 );
}
开发者ID:BackupTheBerlios，项目名称:elua-svn，代码行数:36，代码来源:main.c


示例16: std_register

int std_register()
{
  return dm_register( STD_DEV_NAME, NULL, &std_device );
}
开发者ID:gtfierro，项目名称:storm_elua，代码行数:4，代码来源:genstd.c


示例17: btle_initializeSecurity

ble_error_t
btle_initializeSecurity(bool                                      enableBonding,
                        bool                                      requireMITM,
                        SecurityManager::SecurityIOCapabilities_t iocaps,
                        const SecurityManager::Passkey_t          passkey)
{
    /* guard against multiple initializations */
    if (initialized) {
        return BLE_ERROR_NONE;
    }

    if (pstorage_init() != NRF_SUCCESS) {
        return BLE_ERROR_UNSPECIFIED;
    }

    ret_code_t rc;
    if (passkey) {
        ble_opt_t opts;
        opts.gap_opt.passkey.p_passkey = const_cast<uint8_t *>(passkey);
        if ((rc = sd_ble_opt_set(BLE_GAP_OPT_PASSKEY, &opts)) != NRF_SUCCESS) {
            switch (rc) {
                case BLE_ERROR_INVALID_CONN_HANDLE:
                case NRF_ERROR_INVALID_ADDR:
                case NRF_ERROR_INVALID_PARAM:
                default:
                    return BLE_ERROR_INVALID_PARAM;
                case NRF_ERROR_INVALID_STATE:
                    return BLE_ERROR_INVALID_STATE;
                case NRF_ERROR_BUSY:
                    return BLE_STACK_BUSY;
            }
        }
    }

    dm_init_param_t dm_init_param = {
        .clear_persistent_data = false /* Set to true in case the module should clear all persistent data. */
    };
    if (dm_init(&dm_init_param) != NRF_SUCCESS) {
        return BLE_ERROR_UNSPECIFIED;
    }

    // update default security parameters with function call parameters
    securityParameters.bond = enableBonding;
    securityParameters.mitm = requireMITM;
    securityParameters.io_caps = iocaps;

    const dm_application_param_t dm_param = {
        .evt_handler  = dm_handler,
        .service_type = DM_PROTOCOL_CNTXT_GATT_CLI_ID,
        .sec_param    = securityParameters
    };

    if ((rc = dm_register(&applicationInstance, &dm_param)) != NRF_SUCCESS) {
        switch (rc) {
            case NRF_ERROR_INVALID_STATE:
                return BLE_ERROR_INVALID_STATE;
            case NRF_ERROR_NO_MEM:
                return BLE_ERROR_NO_MEM;
            default:
                return BLE_ERROR_UNSPECIFIED;
        }
    }

    initialized = true;
    return BLE_ERROR_NONE;
}

ble_error_t
btle_purgeAllBondingState(void)
{
    ret_code_t rc;
    if ((rc = dm_device_delete_all(&applicationInstance)) == NRF_SUCCESS) {
        return BLE_ERROR_NONE;
    }

    switch (rc) {
        case NRF_ERROR_INVALID_STATE:
            return BLE_ERROR_INVALID_STATE;
        case NRF_ERROR_NO_MEM:
            return BLE_ERROR_NO_MEM;
        default:
            return BLE_ERROR_UNSPECIFIED;
    }
}
开发者ID:evark，项目名称:gcc4mbed，代码行数:84，代码来源:btle_security.cpp



注：本文中的dm_register函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ dm_task_create函数代码示例发布时间：2022-05-30
下一篇：
C++ dm_read_reg函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap