本文整理汇总了C++中printStatus函数的典型用法代码示例。如果您正苦于以下问题:C++ printStatus函数的具体用法?C++ printStatus怎么用?C++ printStatus使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了printStatus函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: main
int main ()
{
TrafficLight l = TL_Off;
printStatus( l );
printf( "Press any key to enable traffic..." );
getchar();
l = TL_Red;
while ( true )
{
printStatus( l );
printf( "Input 'q' to quit, 'e' to turn on/off, 'b' to toggle blinking mode, any other key for next state\n" );
switch ( getchar() )
{
case 'q':
return 0;
case 'e':
l = ( l == TL_Off ) ? TL_Yellow : TL_Off;
break;
case 'b':
l = ( l == TL_Off ) ? TL_Off : ( ( l == TL_YellowBlinking ) ? TL_Yellow : TL_YellowBlinking );
break;
default:
l = nextTrafficLight( l );
break;
}
}
}
开发者ID:zaychenko-sergei,项目名称:cpp_intro,代码行数:34,代码来源:traffic_light_controller.cpp
示例2: waitTimeout
static void waitTimeout(niport *pniport,double seconds)
{
epicsEventWaitStatus status;
transferState_t saveState;
if(seconds<0.0) {
status = epicsEventWait(pniport->waitForInterrupt);
} else {
status = epicsEventWaitWithTimeout(pniport->waitForInterrupt,seconds);
}
if(status==epicsEventWaitOK) return;
saveState = pniport->transferState;
pniport->transferState = transferStateIdle;
switch(saveState) {
case transferStateRead:
pniport->status=asynTimeout;
printStatus(pniport,"waitTimeout transferStateRead\n");
break;
case transferStateWrite:
pniport->status=asynTimeout;
printStatus(pniport,"waitTimeout transferStateWrite\n");
break;
case transferStateCmd:
pniport->status=asynTimeout;
printStatus(pniport,"waitTimeout transferStateCmd\n");
break;
default:
pniport->status=asynTimeout;
printStatus(pniport,"waitTimeout transferState ?\n");
}
}
开发者ID:A2-Collaboration,项目名称:epics,代码行数:31,代码来源:drvNi1014.c
示例3: checkSuperInvaderHit
/* Function that will determine whether an Super Invader has been hit by player's missile */
int checkSuperInvaderHit(){
for (int k = 0; k<5; k++) {
/* Rememeber Super Invaders are 5 chars long, so need to determine where the player's missile hit the invader */
if ((p.missileX == (superInvader.posX)) && ((p.missileY == (superInvader.posY+k)))) {
mvprintw(superInvader.posX, superInvader.posY, " "); /* go back 5 spaces on the Y and delete the super invader*/
superInvader.alive = 0; /* super invader has been defeated */
score += 500 * level; /* add a score of 500 with regards to the current level */
updateScore(); /* pass this new score into the updateScore() function in player.c */
/* Switch statement that will prompt 'encouraging' messages to the user */
switch(rand()%3){
case 0:
printStatus("Earth 1 Aliens 0!!!!!!!!!");
break;
case 1:
printStatus("Thats the way to gooooo!!!!!!!");
break;
case 2:
printStatus("We will destroy them, bravoooo !!!!");
break;
}
return 1; /* boolean for Super Invader has been hit */
}
}
return 0;
}
开发者ID:RobAntro,项目名称:SpaceInvaders,代码行数:27,代码来源:invader.c
示例4: genCode
void genCode()
{
printProc("Generating code... ");
printStatus("DONE",10);
printProc("Writing on file... ");
printStatus("DONE",10);
writeHeader();
int i, k;
for(i=1; i<=charCount; i++)
{
k=mark[charSet[i]];
while(k!=parent[k])
{
k=parent[k];
if(k<0)
k = -k, push(0);
else
push(1);
}
while((k=pop())> -1)
writeOnFile(k);
}
if(dc<7)
{
for(i=dc+1; i<8; i++)
s[i] = '0';
toDec();
fputc(7-dc+'0', fp);
}
else
{
fputc(0+'0', fp);
}
closeFile2Write();
}
开发者ID:AssaultKoder95,项目名称:codejam,代码行数:35,代码来源:Comp.cpp
示例5: dialog
void ExecutionListView::deleteRegex()
{
CSMesBackgroundComputations::Pauser pauser;
ExecutionListModel *model_p=_model();
if (! model_p)
return;
WExecutionDelete dialog(csmes_p,this);
if (dialog.exec())
{
ExecutionNames sources=dialog.sourceList();
csmes_p->beginUndoGroup(tr("Delete executions '%1'").arg(dialog.source()));
int sz=sources.size();
for (int i=0; i<sz; i++)
{
printStatus(tr("Deleting '%1'...").arg(sources.at(i)),static_cast<float>(i)/static_cast<float>(sz));
if (!model_p->deleteExecution(sources.at(i)))
{
if (QMessageBox::warning(this,tr("Error"),tr("Deleting '%1' not possible.").arg(sources.at(i)),
QMessageBox::Abort, QMessageBox::Ignore)==QMessageBox::Abort)
break;
}
}
csmes_p->endUndoGroup();
printStatus("",-1);
}
}
开发者ID:testcocoon,项目名称:testcocoon,代码行数:26,代码来源:ExecutionListView.cpp
示例6: checkInvaderHit
/* Function that will determine whether an invader has been hit by player's missile */
int checkInvaderHit(){
for (int i = 0; i<INVADERS_ROWS; i++)
for (int j = 0; j<INVADERS_COLUMNS; j++) {
if (inv[i][j].alive) {
for (int k = -1; k<2; k++) {
/* Remember invaders are 3 chars long, so need to determine where the player's missile hit the invader */
if ((p.missileX == (inv[i][j].posX)) && ((p.missileY == (inv[i][j].posY+k)))) {
mvprintw(inv[i][j].posX, inv[i][j].posY-1, " "); /* go back 3 spaces on the Y and delete the invader */
inv[i][j].alive = 0; /* current invader has been defeated */
count--; /* number of invaders has been decreased */
score += 100 * level; /* add a score of 100 with regards to what level user is on */
updateScore(); /* pass this new score into the updateScore() function in player.c */
/* Switch statement that will prompt 'encouraging' messages to the user */
switch(rand()%3){
case 0:
printStatus("Great Shot! Just keep going.");
break;
case 1:
printStatus("Nuke them down, nuke them down!!!");
break;
case 2:
printStatus("Superb shot!!!");
break;
}
return 1; /* boolean for invader has been hit */
}
}
}
}
return 0;
}
开发者ID:RobAntro,项目名称:SpaceInvaders,代码行数:33,代码来源:invader.c
示例7: if
void MotionGraphController::iterateStatus()
{
//transitions to follow
if (path.size() > 0)
{
status.isTransitioning = true;
// take the first one off the list;
vertexTargets temp = path.front();
path.pop_front();
//first seq
status.SeqID = temp.SeqID;
//first seq framenumber where we transition
status.FrameNumberTransition = temp.FrameNumber;
//what we are transitioning to
status.TransitionToSeqId = temp.SeqID2;
//what frame we are transitioning to on the second seq;
status.FrameNumberTransitionTo = temp.FrameNumber2;
}
//let it play out
else if (status.isTransitioning==true)
{
status.SeqID = status.TransitionToSeqId;
status.FrameNumber = status.FrameNumberTransitionTo;
status.FrameNumberTransition = returnMotionSequenceContainerFromID(status.SeqID).MS->numFrames();
status.isTransitioning = false;
printStatus();
}// none left so repeat
else
{
path = pathBackup;
iterateStatus();
printStatus();
return;
//status.isTransitioning = true;
// the last transition is now the new seqId aka what is playing
status.SeqID = status.TransitionToSeqId;
// MotionSequence *motion_sequence = returnMotionSequenceContainerFromID(status.SeqID).MS;
//where to transition on the last frame
//status.FrameNumberTransition = motion_sequence->numFrames();
/// set transition to to fame 0 of the same motion sequence
//status.FrameNumberTransitionTo = 0;
}
//iterate the motio
}
开发者ID:camcow,项目名称:SKAstart,代码行数:51,代码来源:MotionGraphController.cpp
示例8: clock
SequenceStatus GestureSeqRecorder::findActivation(Pose::Type gesture, ControlState state, commandData& response)
{
SequenceStatus status = SequenceStatus::SUCCESS;
sequenceList *seqList = (*seqMapPerMode)[state.getMode()];
// Loop through all possible sequences in this mode, and activate any that
// have a matching first gesture.
for (sequenceList::iterator it = seqList->begin(); it != seqList->end(); it++)
{
if ((it->seq.size() >= 0) &&
(it->seq.at(0).type == gesture))
{
clock_t now = clock();
progressBaseTime = now;
if (it->seq.at(0).poseLen == SeqElement::PoseLength::IMMEDIATE)
{
// Special case. Immediate isn't 'held'
response = it->sequenceResponse;
break;
}
// found sequence to activate!
activeSequencesMutex.lock();
activeSequences.push_back(&(*it));
activeSequencesMutex.unlock();
printStatus(true);
holdGestTimer = REQ_HOLD_TIME; // set count on any progression
}
}
seqList = NULL;
return status;
}
开发者ID:FusionpipeSoftwareSolutions,项目名称:ProjectMidas,代码行数:34,代码来源:GestureSeqRecorder.cpp
示例9: initInjectorCentral
void initInjectorCentral(Logging *sharedLogger) {
logger = sharedLogger;
chThdCreateStatic(benchThreadStack, sizeof(benchThreadStack), NORMALPRIO, (tfunc_t) benchThread, NULL);
for (int i = 0; i < engineConfiguration->specs.cylindersCount; i++) {
is_injector_enabled[i] = true;
}
startInjectionPins();
startIgnitionPins();
printStatus();
addConsoleActionII("injector", setInjectorEnabled);
addConsoleAction("fuelpumpbench", fuelPumpBench);
addConsoleActionS("fuelpumpbench2", fuelPumpBenchExt);
addConsoleAction("fanbench", fanBench);
addConsoleAction("milbench", milBench);
addConsoleActionSSS("fuelbench", fuelbench);
addConsoleActionSSS("sparkbench", sparkbench);
addConsoleActionSSSSS("fuelbench2", fuelbench2);
addConsoleActionSSSSS("sparkbench2", sparkbench2);
}
开发者ID:glocklueng,项目名称:rusefi,代码行数:25,代码来源:injector_central.cpp
示例10: printStatus
void StatusTestGenResNorm<Sacado::MP::Vector<StorageType>,MV,OP>::print(std::ostream& os, int indent) const
{
for (int j = 0; j < indent; j ++)
os << ' ';
printStatus(os, status_);
os << resFormStr();
if (status_==Undefined)
os << ", tol = " << tolerance_ << std::endl;
else {
os << std::endl;
if(showMaxResNormOnly_ && curBlksz_ > 1) {
const MagnitudeType maxRelRes = *std::max_element(
testvector_.begin()+curLSIdx_[0],testvector_.begin()+curLSIdx_[curBlksz_-1]
);
for (int j = 0; j < indent + 13; j ++)
os << ' ';
os << "max{residual["<<curLSIdx_[0]<<"..."<<curLSIdx_[curBlksz_-1]<<"]} = " << maxRelRes
<< ( maxRelRes <= tolerance_ ? " <= " : " > " ) << tolerance_ << std::endl;
}
else {
for ( int i=0; i<numrhs_; i++ ) {
for (int j = 0; j < indent + 13; j ++)
os << ' ';
os << "residual [ " << i << " ] = " << testvector_[ i ];
os << ((testvector_[i]<tolerance_) ? " < " : (testvector_[i]==tolerance_) ? " == " : (testvector_[i]>tolerance_) ? " > " : " " ) << tolerance_ << std::endl;
}
}
}
os << std::endl;
}
开发者ID:agrippa,项目名称:Trilinos,代码行数:30,代码来源:Belos_StatusTest_GenResNorm_MP_Vector.hpp
示例11: main
int main() {
// Declares struct for screen coordinates
struct scrCoord Scr;
// Declares struct for commands
struct Command Cmd;
// Initializes variables
Cmd.play = TRUE;
Cmd.pu = FALSE;
Cmd.colorPair = 1;
Cmd.cmndIndex = -1;
// Initializes screen
initScreen(&Scr);
while(Cmd.play) {
// Prints coordinates and angle
printStatus(&Scr);
// Receives the command
recCommand(&Scr, &Cmd);
// Interprets command
interpCommand(&Scr, &Cmd);
}
// Ends NCURSE screen
endwin();
return 0;
}
开发者ID:maxgomes92,项目名称:EADCoursesCodes,代码行数:32,代码来源:main.c
示例12: initInjectorCentral
void initInjectorCentral(void) {
initLogging(&logger, "InjectorCentral");
chThdCreateStatic(benchThreadStack, sizeof(benchThreadStack), NORMALPRIO, (tfunc_t) benchThread, NULL);
for (int i = 0; i < engineConfiguration->cylindersCount; i++) {
is_injector_enabled[i] = true;
}
// todo: should we move this code closer to the injection logic?
for (int i = 0; i < engineConfiguration->cylindersCount; i++) {
io_pin_e pin = (io_pin_e) ((int) INJECTOR_1_OUTPUT + i);
outputPinRegisterExt2(getPinName(pin), pin, boardConfiguration->injectionPins[i],
&boardConfiguration->injectionPinMode);
}
printStatus();
addConsoleActionII("injector", setInjectorEnabled);
addConsoleActionII("fuelpumpbench", &fuelpumpbench);
addConsoleActionSSS("fuelbench", &fuelbench);
addConsoleActionSSS("sparkbench", &sparkbench);
addConsoleActionSSSSS("fuelbench2", &fuelbench2);
addConsoleActionSSSSS("sparkbench2", &sparkbench2);
}
开发者ID:ngocphu811,项目名称:rusefi,代码行数:27,代码来源:injector_central.cpp
示例13: loopCommandLine
void loopCommandLine(void) {
// print status if we're not in the menu
if (! menuEnabled) {
if (TimerReached(&cmdline_looptime, 1000)) {
printStatus();
}
}
// check for serial command
unsigned int c = uart_getc();
if (!(c & UART_NO_DATA)) {
if (! menuEnabled) {
menuEnabled=1;
printHelp();
}
switch((char) c) {
case 'x': case 'X': // terminates menu
uart_puts_P("Leaving menu." NEWLINESTR);
menuEnabled=0; break;
case 'b': case 'B': // show PID values
printPID(); break;
case 'r': case 'R': // reset PID values
restorePIDDefault(); break;
case 'o': case 'O': // print out PID debug data
togglePIDDebug(); break;
case 'p':
setPID_P(getPID_P() - delta); printPID(); break;
case 'P':
setPID_P(getPID_P() + delta); printPID();break;
case 'i':
setPID_I(getPID_I() - delta); printPID(); break;
case 'I':
setPID_I(getPID_I() + delta); printPID(); break;
case 'd':
setPID_D(getPID_D() - delta); printPID(); break;
case 'D':
setPID_D(getPID_D() + delta); printPID(); break;
case 't':
setPIDSetpoint(getPIDSetpoint() - delta); printPID(); break;
case 'T':
setPIDSetpoint(getPIDSetpoint() + delta); printPID(); break;
case 's': case 'S':
savePIDConfig(); break;
case '+': {// adjust delta
delta *= 10.0;
if (delta > MAX_DELTA) delta = MAX_DELTA;
uart_print_delta();
break;
}
case '-': {// adjust delta
delta /= 10.0;
if (delta < MIN_DELTA) delta = MIN_DELTA;
uart_print_delta();
break;
}
case '?': // show menu
printHelp(); break;
}
}
}
开发者ID:ChaosCoffeeControl,项目名称:CCC-PIDController,代码行数:60,代码来源:cmdline.c
示例14: dijkstra
void dijkstra(graph* G, long initial_node, char debug)
{
long i,j,k;
long aN; //actualNode
G->D[initial_node] = 0;
aN = initial_node;
printf("Running dijkstra on graph\n");
if(debug)
printGraph(G);
for(i = 0; i < G->N; i++)
{
G->visited[aN] = VISITED;
if(debug){
printf("It[%d] aN [%d]",i, aN); printStatus(G); printf("\n");
}
//Find all nodes connected to aN
for(j=0;j<G->N;j++){
if( (G->node[aN][j] != NO_CONN) ){
if( (G->D[aN] + G->node[aN][j]) < G->D[j] ){
G->D[j] = (G->D[aN] + G->node[aN][j]);
}
}
}
aN = getNextNode(G);
}
printf("Finished Dijkstra\n");
}
开发者ID:Saadia0220,项目名称:Dijkstra,代码行数:33,代码来源:dijkstra.c
示例15: printStatus
void XMOSControlPlugin::down(){
printStatus(status, curLayer);
switch(status){
case SELECT_LAYER:
curLayer=((curLayer)%XmosConfig::instance().numLayers())+1;
break;
case START_LAYER:
XmosConfig::instance().stopLayer(curLayer);
layerStarted[curLayer]=false;
break;
case ON_PERIOD:
XmosConfig::instance().setOnPeriod(curLayer,XmosConfig::instance().getLayer(curLayer).getOnPeriod()-1);
XmosConfig::instance().loadLayer(curLayer);
break;
case OFFSET:
XmosConfig::instance().setOffset(curLayer,XmosConfig::instance().getLayer(curLayer).getOffset()-1);
XmosConfig::instance().loadLayer(curLayer);
break;
case CYCLE:
XmosConfig::instance().setCycleTime(curLayer,XmosConfig::instance().getLayer(curLayer).getCycleTime()-1);
XmosConfig::instance().loadLayer(curLayer);
break;
case RUNNING:
//ignore
break;
}
}
开发者ID:vladotrocol,项目名称:Bubbles,代码行数:27,代码来源:XMOSControlPlugin.cpp
示例16: setChartSize
void setChartSize(int newSize) {
if (newSize < 5) {
return;
}
engineConfiguration->engineChartSize = newSize;
printStatus();
}
开发者ID:rusefi,项目名称:rusefi,代码行数:7,代码来源:engine_sniffer.cpp
示例17: printStatus
void HTTPServer::printHeaders(const __FlashStringHelper* contentType, const __FlashStringHelper* status)
{
printStatus(status);
print(F("Content-Type: "));
println(contentType);
println();
}
开发者ID:njh,项目名称:EtherSia,代码行数:7,代码来源:HTTPServer.cpp
示例18: setChartActive
static void setChartActive(int value) {
engineConfiguration->isEngineChartEnabled = value;
printStatus();
#if EFI_CLOCK_LOCKS
maxLockedDuration = 0; // todo: why do we reset this here? why only this and not all metrics?
#endif /* EFI_CLOCK_LOCKS */
}
开发者ID:rusefi,项目名称:rusefi,代码行数:7,代码来源:engine_sniffer.cpp
示例19: initialize
void initialize(void)
{
installEmptySignalHandler(SIGUSR1);
initializeTerminal();
printf("\n\n\n\n\n\n\n");
printStatus(MXT_TMANAGER_RUNNING, MXT_TMANAGER_RUNNING, MXT_TMANAGER_RUNNING);
}
开发者ID:MaltesIndividualUsername,项目名称:VirtualMachine,代码行数:7,代码来源:main.c
示例20: main
int main(void)
{
printStatus();
int num;
while(std::cin>>num)
{
std::cout<<num<<std::endl;
}
printStatus();
std::cin.clear();
return 0;
}
开发者ID:Fransunshine,项目名称:chapters_wd_git,代码行数:16,代码来源:io_test_1.cpp
注:本文中的printStatus函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论