本文整理汇总了C++中print_buffer函数的典型用法代码示例。如果您正苦于以下问题:C++ print_buffer函数的具体用法?C++ print_buffer怎么用?C++ print_buffer使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了print_buffer函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: print_client
static void print_client(struct client *client) {
if(client == NULL)
fprintf(stderr, "NO_CLIENT");
else {
fprintf(stderr, "(%p): ", client);
switch(client->type) {
case REQ_RESP:
fprintf(stderr, "FD = '%d'; TYPE = '%s'; ARCH = '%s'; STATE = '%s'\n", client->fd,
client_type_2_str(client->type),
aconv_arch2str(client->arch),
client_state_2_str(client->state));
print_buffer(client->rbuf, "Read buffer");
print_buffer(client->wbuf, "Write buffer");
break;
case EVENT_SUB:
fprintf(stderr, "FD = '%d'; TYPE = '%s'; STATE = '%s''\n", client->fd,
client_type_2_str(client->type), client_state_2_str(client->state));
print_buffer(client->rbuf, "Read buffer");
print_buffer(client->wbuf, "Write buffer");
break;
default:
fprintf(stderr, "DATA_FD = '%d'; TYPE = '%s'; EVENT SUB FD INDEX = %d",
client->fd, client_type_2_str(client->type), client->esfd_index);
break;
}
}
}
开发者ID:virtualsquare,项目名称:view-os,代码行数:27,代码来源:pollfd_info.c
示例2: main
int main(int argc, const char* argv[]) {
FILE *fp;
// 需从流中读或写才能建立缓冲区,获取准确的默认缓冲大小,否则会获取到0
fputs("enter to activate stdin buffer size\n", stdout);
if (getc(stdin) == EOF) {
err_sys("getc error");
}
//fputs("activate stdout\n", stderr);
print_buffer("stdin", stdin);
print_buffer("stdout", stdout);
print_buffer("stderr", stderr);
if ((fp = fopen("file.txt", "a+")) == NULL) {
err_sys("fopen error");
}
// 需从流中读或写才能建立缓冲区,获取准确的默认缓冲大小
if (putc('A', fp) == EOF) {
err_sys("putc error");
}
print_buffer("file.txt", fp);
exit(0);
}
开发者ID:newaowen,项目名称:myapue,代码行数:25,代码来源:printf_io_buffer.c
示例3: delete_from_buffer
int delete_from_buffer(bool right) {
if(right) {
forward_buffer();
} else {
wprintf(L"\033[1D");
}
if(buffer->current == NULL) {
return RET_OK;
} else {
wprintf(L"\033[K");
}
delete_elem(buffer);
if(buffer->current == NULL) {
print_buffer(true);
wprintf(L"\033[1D");
return RET_OK;
}
if(buffer->current->next != NULL) {
forward_buffer();
print_buffer(true);
backward_buffer();
wprintf(L"\033[1D");
}
return RET_OK;
}
开发者ID:Jibux,项目名称:wtfshell,代码行数:30,代码来源:wtfshell.c
示例4: new_ioctl
static int new_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) {
int ret = 0;
struct iwreq *iwr = (struct iwreq *) ifr;
struct iw_request_info info;
#ifdef DEBUG
printk("dev: %s ioctl: 0x%04x\n",dev->name,cmd);
#endif
if (cmd >= SIOCIWFIRSTPRIV) {
info.cmd = cmd;
info.flags = 0;
ret = wlcompat_private_ioctl(dev, &info, &(iwr->u), (char *) &(iwr->u));
#ifdef DEBUG
} else if (cmd==SIOCDEVPRIVATE) {
wl_ioctl_t *ioc = (wl_ioctl_t *)ifr->ifr_data;
unsigned char *buf = ioc->buf;
printk(" cmd: %d buf: 0x%08x len: %d\n",ioc->cmd,&(ioc->buf),ioc->len);
printk(" send: ->");
print_buffer(ioc->len, buf);
ret = old_ioctl(dev,ifr,cmd);
printk(" recv: ->");
print_buffer(ioc->len, buf);
printk(" ret: %d\n", ret);
#endif
} else {
ret = old_ioctl(dev,ifr,cmd);
}
return ret;
}
开发者ID:anchowee,项目名称:linino,代码行数:30,代码来源:wlcompat.c
示例5: TEST
TEST ()
{
GeglBuffer *buffer, *sub, *subsub, *foo;
GeglRectangle subrect = {5, 5, 10, 10};
GeglRectangle foor = {0, 0, 10, 10};
GeglRectangle rect = {0, 0, 20, 20};
test_start ();
buffer = gegl_buffer_new (&rect, babl_format ("Y float"));
sub = gegl_buffer_create_sub_buffer (buffer, &subrect);
vgrad (buffer);
vgrad (sub);
subsub = g_object_new (GEGL_TYPE_BUFFER,
"source", sub,
"x", 0,
"y", 0,
"width", 40,
"height", 40,
"shift-x", 0,
"shift-y", 0,
NULL);
foo = gegl_buffer_create_sub_buffer (subsub, &foor);
/*fill (subsub, 0.2);*/
print_buffer (buffer);
print_buffer (foo);
g_object_unref (sub);
g_object_unref (subsub);
g_object_unref (buffer);
g_object_unref (foo);
test_end ();
}
开发者ID:AjayRamanathan,项目名称:gegl,代码行数:32,代码来源:get_shifted.c
示例6: open_device
bool open_device( struct pclta_device * device )
{
CALL_MSG( "Starting open_device()", ++pclta_call_level );
// allocate and initialize buffers
device->rx = kmalloc( sizeof(struct pclta_packet_buffer), GFP_KERNEL );
if( device->rx == NULL ) {
RETURN_MSG( "open_device() ERROR= device->rx == NULL", pclta_call_level-- );
return false;
}
device->tx = kmalloc( sizeof(struct pclta_packet_buffer), GFP_KERNEL );
if( device->tx == NULL ) {
kfree( device->rx );
RETURN_MSG( "open_device() ERROR= device->tx == NULL", pclta_call_level-- );
return false;
}
init_buffers( device->rx );
DEBUG_MSG("RECEIVE BUFFER");
print_buffer(device->rx);
init_buffers( device->tx );
DEBUG_MSG("TRANSMIT BUFFER");
print_buffer(device->tx);
// set initial state of device
device->restart_uplink = false;
device->pclta_wait_queue = NULL;
// last_packet_read_complete=true; // for incomplete reads
RETURN_MSG( "open_device() SUCCESS", pclta_call_level-- );
return true;
}
开发者ID:NhaTrang,项目名称:lon4linux,代码行数:34,代码来源:pclta.c
示例7: test01
/* Test 1: Add temperature and humidity */
static void test01(lora_serialization_t *serialization)
{
puts("Test 1");
puts("Temperature and humidity");
puts("---------------------------------");
lora_serialization_reset(serialization); // Always reset
puts("- Writing temperature: 80.12");
lora_serialization_write_temperature(serialization, 80.12);
puts("- Writing humidity: 99.99");
lora_serialization_write_humidity(serialization, 99.99);
printf("- Encoded: ");
print_buffer(serialization->buffer,
LORA_SERIALIZATION_TEMPERATURE_SIZE +
LORA_SERIALIZATION_HUMIDITY_SIZE);
puts("");
printf("- Expected:");
print_buffer(test01Expected, sizeof(test01Expected));
puts("");
puts("---------------------------------");
if (memcmp(serialization->buffer, test01Expected,
sizeof(test01Expected)) != 0) {
puts("FAILED");
}
else {
puts("SUCCESS");
}
}
开发者ID:A-Paul,项目名称:RIOT,代码行数:33,代码来源:main.c
示例8: consume2
// Consumer 2 consumes the first node from the list if its value is even
consume2(){
int i;
for(i=0;i<10;i++){
pthread_mutex_lock(&mymutex);
printf("\nConsumer 2 Running");
if(buffer_size>1){
if(((bhead->value)%2)==0){
print_buffer();
bhead = bhead->next;
free(bhead->prev);
bhead->prev = 0;
buffer_size--;
print_buffer();
}
} else if(buffer_size==1){
if(((bhead->value)%2)==0){
print_buffer();
free(bhead);
bhead = 0;
buffer_size--;
print_buffer();
}
} else {
printf("\nBuffer underflow on Consumer 2!");
}
pthread_mutex_unlock(&mymutex);
sleep(1);
}
return;
}
开发者ID:jdebr,项目名称:os460,代码行数:31,代码来源:lab2.c
示例9: produce1
// Producer 1 generates a new node at the end of the buffer with an odd value
produce1(){
int i;
for(i=0;i<10;i++){
pthread_mutex_lock(&mymutex);
if(buffer_size<BUFFER_MAX){
printf("\nProducer 1 Running");
print_buffer();
struct node* new_node = malloc(sizeof(struct node));
int new_value = rand()%39;
if((new_value%2)==0){
new_value++;
}
new_node->value = new_value;
new_node->next = 0;
// Special case if list is empty:
if(buffer_size==0){
new_node->prev = 0;
bhead = new_node;
} else {
new_node->prev = btail;
btail->next = new_node;
}
btail = new_node;
buffer_size++;
print_buffer();
} else {
printf("\nBuffer overflow on Producer 1!");
}
pthread_mutex_unlock(&mymutex);
sleep(1);
}
return;
}
开发者ID:jdebr,项目名称:os460,代码行数:34,代码来源:lab2.c
示例10: test02
/* Test 2: Add GPS coordinates and unix time */
static void test02(lora_serialization_t *serialization)
{
puts("Test 2");
puts("Coordinates and unix time");
puts("---------------------------------");
lora_serialization_reset(serialization); // Always reset
puts("- Writing coordinates: -33.905052, 151.26641");
lora_serialization_write_coordinates(serialization, -33.905052, 151.26641);
puts("- Writing unix time: 1467632413");
lora_serialization_write_unix_time(serialization, 1467632413);
printf("- Encoded: ");
print_buffer(serialization->buffer,
LORA_SERIALIZATION_GPS_SIZE +
LORA_SERIALIZATION_UNIX_TIME_SIZE);
puts("");
printf("- Expected:");
print_buffer(test02Expected, sizeof(test02Expected));
puts("");
puts("---------------------------------");
if (memcmp(serialization->buffer, test02Expected,
sizeof(test02Expected)) != 0) {
puts("FAILED");
}
else {
puts("SUCCESS");
}
}
开发者ID:A-Paul,项目名称:RIOT,代码行数:33,代码来源:main.c
示例11: do_test_write_append_without_null
/* This test check append mode initial position (a/a+) based on POSIX defition
(BZ#6544 and BZ#13151) for buffer without null byte end. */
static int
do_test_write_append_without_null (const char *mode)
{
char buf[] = { 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55 };
char exp[] = { 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55 };
/* If '\0' is not found in buffer, POSIX states that SEEK_SET should be
the size argument. */
FILE *fp = fmemopen (buf, sizeof (buf) - 2, "a");
fflush (fp);
fputc (0x70, fp);
fseek (fp, 0, SEEK_SET);
fputc (0x70, fp);
fputc (0x70, fp);
fclose (fp);
/* POSIX also states that a write operation on the stream shall not advance
the current buffer size beyond the size given in fmemopen, so the string
should be same. */
if (memcmp (buf, exp, sizeof (buf)) != 0)
{
printf ("%s: check failed: ", __FUNCTION__);
print_buffer (buf, sizeof (buf));
printf ("!= ");
print_buffer (exp, sizeof (exp));
printf ("\n");
return 1;
}
return 0;
}
开发者ID:RobbenBasten,项目名称:glibc,代码行数:34,代码来源:tst-fmemopen3.c
示例12: do_test_read_seek_neg
/* This test check for fseek (SEEK_END) using negative offsets (BZ#14292). The
starting position of descriptor is different base on the opening mode. */
static int
do_test_read_seek_neg (const char *mode, const char *expected)
{
char buf[] = "abcdefghijklmnopqrstuvxz0123456789";
char tmp[10];
size_t tmps = sizeof (tmps);
long offset = -11;
FILE *fp = fmemopen (buf, sizeof (buf), mode);
fseek (fp, offset, SEEK_END);
fread (tmp, tmps, 1, fp);
if (memcmp (tmp, expected, tmps) != 0)
{
printf ("%s: fmemopen(%s) - fseek (fp, %li, SEEK_END):\n",
__FUNCTION__, mode, offset);
printf (" returned: ");
print_buffer (tmp, tmps);
printf ("\n");
printf (" expected: ");
print_buffer (expected, tmps);
printf ("\n");
return 1;
}
fclose (fp);
return 0;
}
开发者ID:RobbenBasten,项目名称:glibc,代码行数:31,代码来源:tst-fmemopen3.c
示例13: testHash
void testHash()
{
unsigned char Digest[32];
sha256_context ctx;
sha256_init( &ctx );
sha256_starts( &ctx, 0 );
sha256_update( &ctx, sha256_test_buf[0], sha256_test_buflen[0] );
sha256_finish( &ctx, Digest );
print_buffer(Digest, sizeof(Digest));
memset(Digest, 0, sizeof(Digest));
uint8 buffer[1];
sha256_init( &ctx );
sha256_starts( &ctx, 0 );
buffer[0] = 'a';
sha256_update( &ctx, buffer, 1 );
buffer[0] = 'b';
sha256_update( &ctx, buffer, 1 );
buffer[0] = 'c';
sha256_update( &ctx, buffer, 1 );
buffer[0] = '\0';
sha256_update( &ctx, buffer, 1 );
sha256_finish( &ctx, Digest );
print_buffer(Digest, sizeof(Digest));
}
开发者ID:dileepkella85,项目名称:trunk,代码行数:35,代码来源:crypto.c
示例14: TEST
TEST ()
{
GeglBuffer *buffer, *sub1, *sub2, *sub3;
GeglRectangle subrect1 = {5, 5, 10, 10};
GeglRectangle subrect2 = {8, 8, 30, 30};
GeglRectangle subrect3 = {-2, -2, 24, 24};
GeglRectangle rect = {0, 0, 20, 20};
test_start ();
buffer = gegl_buffer_new (&rect, babl_format ("Y float"));
sub1 = gegl_buffer_create_sub_buffer (buffer, &subrect1);
sub2 = gegl_buffer_create_sub_buffer (buffer, &subrect2);
sub3 = gegl_buffer_create_sub_buffer (buffer, &subrect3);
fill (sub1, 0.5);
print (("root with sub1 filled in:\n"));
print_buffer (buffer);
print (("sub2 before fill:\n"));
print_buffer (sub2);
fill (sub2, 1.0);
print (("final root:\n"));
print_buffer (buffer);
print (("final sub1:\n"));
print_buffer (sub1);
print (("final sub3:\n"));
print_buffer (sub3);
gegl_buffer_destroy (sub1);
gegl_buffer_destroy (sub2);
gegl_buffer_destroy (sub3);
gegl_buffer_destroy (buffer);
test_end ();
}
开发者ID:jcupitt,项目名称:gegl-vips,代码行数:33,代码来源:sub_rect_fills_and_gets.c
示例15: print_ia
/* prints a newline at the end of the address info */
void print_ia (struct internet_addr * ia)
{
printf ("v %d, port %d, addr ", ia->ip_version, ntohs (ia->port));
if (ia->ip_version == 4)
print_buffer (((char *) &(ia->ip)) + 12, 4, NULL, 4, 1);
else
print_buffer ((char *) &(ia->ip), 16, NULL, 16, 1);
}
开发者ID:abrauchli,项目名称:allnet,代码行数:9,代码来源:ai.c
示例16: TestAESCrypto
////////////////////////////////////////////////////////////////////////////
//
// AES Encryption / Decryption - ECB Blocks
//
////////////////////////////////////////////////////////////////////////////
status TestAESCrypto( void )
{
uint8 ret;
uint8 buffer[512]; // AES - CBC can take less than 256 bytes as input
uint8 key[16]; // Key can be 16 bytes ~ 128 AES or 32 bytes 256 AES
uint8 iv[16]; // iv fixed random value of 16 bytes
uint8 updated_iv[16];
entropy_init( &entropy );
if( ( ctr_drbg_init( &ctr_drbg, entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
proj_printf( " failed\n ! ctr_drbg_init returned -0x%x\n", -ret );
return ( FAIL );
}
//DRBG test
proj_printf("INF: DRBG test - generate Random number");
PrngGenerateBytes( buffer, sizeof(buffer));
print_buffer(buffer,sizeof(buffer));
// Setting key, iv and buffer values
memset(buffer, 0xA5, sizeof(buffer));
print_buffer(buffer,sizeof(buffer));
PrngGenerateBytes(key,sizeof(key));
print_buffer(key,sizeof(key));
PrngGenerateBytes(iv,sizeof(iv));
print_buffer(iv,sizeof(iv));
// AES -CBC test
memcpy(updated_iv, iv, sizeof(iv));
AESCryptCBC( key, sizeof(key), AES_ENCRYPT, updated_iv, sizeof(buffer), buffer, buffer );
print_buffer(buffer, sizeof(buffer));
AESCryptCBC( key, sizeof(key), AES_DECRYPT, iv, sizeof(buffer), buffer, buffer );
print_buffer(buffer, sizeof(buffer));
// AES - ECB
AESCryptECB( key, sizeof(key), AES_ENCRYPT, buffer, buffer );
print_buffer(buffer, sizeof(buffer));
AESCryptECB( key, sizeof(key), AES_DECRYPT, buffer, buffer );
print_buffer(buffer, sizeof(buffer));
// AES - ECB Blocks
AESCryptECB_Blocks( key, sizeof(key), AES_ENCRYPT, sizeof(buffer)/16, buffer, buffer );
print_buffer(buffer, sizeof(buffer));
AESCryptECB_Blocks( key, sizeof(key), AES_DECRYPT, sizeof(buffer)/16, buffer, buffer );
print_buffer(buffer, sizeof(buffer));
return ( PASS );
}
开发者ID:dileepkella85,项目名称:trunk,代码行数:63,代码来源:crypto.c
示例17: main
int main()
{
interrupt_count = 0;
transfer_count = 0;
tx_count = 0;
rx_count = 0;
uint32_t output_count = 0;
uint32_t sum = 0;
init();
// initialize buffers with some known value
memset(tx_buffer,0x55,sizeof(tx_buffer));
memset(rx_buffer,0x22,sizeof(rx_buffer));
// configure SPI
MAP_SPIReset(GSPI_BASE);
MAP_SPIConfigSetExpClk(GSPI_BASE,MAP_PRCMPeripheralClockGet(PRCM_GSPI),
SPI_IF_BIT_RATE,SPI_MODE_SLAVE,SPI_SUB_MODE_0,
(SPI_HW_CTRL_CS |
SPI_4PIN_MODE |
SPI_TURBO_OFF |
SPI_CS_ACTIVEHIGH |
SPI_WL_8));
MAP_SPIIntRegister(GSPI_BASE,interrupt_handler);
MAP_SPIIntEnable(GSPI_BASE,SPI_INT_RX_FULL|SPI_INT_TX_EMPTY);
MAP_SPIEnable(GSPI_BASE);
Message("Enabled SPI Interface in Slave Mode!\n\r");
Message("Starting while\n\r");
while(1)
{
memcpy(tx_buffer,rx_buffer,TR_BUFF_SIZE);
// here we could also change the tx_buffer
// e.g. tx_buffer[TR_BUFF_SIZE - 1] = 18;
sum = 0;
if(output_count < transfer_count)
{
for(int i = 0; i < TR_BUFF_SIZE; i++)
{
sum += rx_buffer[i];
}
Report("The sum in the Rx buffer is: %d\n\r",sum);
Report("Checksum Rx buffer is: 0x%02x\n\r",crc(rx_buffer));
Report("interrupt: %d, tx: %d, rx: %d, transfer: %d\n\r",interrupt_count,tx_count,rx_count, transfer_count);
Message("TX-");
print_buffer(tx_buffer,TR_BUFF_SIZE);
Message("RX-");
print_buffer(rx_buffer,TR_BUFF_SIZE);
output_count++;
}
}
return 0;
}
开发者ID:HackLinux,项目名称:cc3200_dma_spi_example,代码行数:57,代码来源:slave.c
示例18: run_tests
int run_tests() {
int i;
int success = 0, total = 0;
for (i = 0; i < (sizeof(test_cases) / sizeof(test_cases[0])); i++) {
struct in6_addr addr, correct;
uint8_t buf[512];
char *rv;
uint8_t *btr = test_cases[i].buf;
size_t len = 32;
int ret;
uint8_t stateful;
ieee154_addr_t l2addr;
total++;
inet_pton6(test_cases[i].address, &correct);
ieee154_parse(test_cases[i].l2addr, &l2addr);
ieee154_print(&l2addr, buf, 512);
printf("%s\n", buf);
printf("in6_addr: %s\n", test_cases[i].address);
ret = unpack_address(&addr,
test_cases[i].dispatch,
test_cases[i].context,
&btr,
&len,
&l2addr,
test_cases[i].panid,
&stateful);
inet_ntop6(&addr, buf, 512);
printf("result: %s length: %li\n", buf, 32 - len);
if (test_cases[i].len != 32 - len) {
printf("case %u: result len: %li expected: %i\n",
i, 32 - len, test_cases[i].len);
continue;
}
if (memcmp(&addr, &correct, 16) != 0) {
printf("case %u: unexpected result\n", i);
print_buffer(correct.s6_addr, 16);
print_buffer(addr.s6_addr, 16);
continue;
}
if (test_cases[i].stateful != stateful) {
printf("case %u: stateful compression was used!\n", test_cases[i].stateful);
continue;
}
success++;
}
printf("%s: %i/%i tests succeeded\n", __FILE__, success, total);
if (success == total) return 0;
return 1;
}
开发者ID:AkramAlomainy,项目名称:tinyos-main,代码行数:56,代码来源:test_unpack_address.c
示例19: check_test
int check_test(struct ip6_packet *pkt, struct lowpan_reconstruct *recon) {
char buf[2048];
memset(buf, 0, 2048);
memcpy(buf, &pkt->ip6_hdr, sizeof(struct ip6_hdr));
iov_read(pkt->ip6_data, 0, iov_len(pkt->ip6_data), &buf[sizeof(struct ip6_hdr)]);
// printf("CMP: %i", memcmp(buf, recon->r_buf, recon->r_bytes_rcvd));
print_buffer(buf, 50);
print_buffer(recon->r_buf, 50);
printf("CMP: %i\n", memcmp(buf, recon->r_buf, 50));
}
开发者ID:0111sandesh,项目名称:TinyOS-Sec,代码行数:11,代码来源:test_lowpan_frag_get.c
示例20: edit_vocab
void edit_vocab(vocab_t *pnodoedit, char secmea[]) {
pantalla_t *pant = get_curses();
char opcion = '0';
char *str=NULL;
str = (char *)malloc(sizeof(char)*TAM_BUF);
if (!str) {
exit_mem(EXIT_FAILURE, "Not enough memory.");
}
//wprintw(pant->buffer,"\n");
print_buffer_new_line();
while ((opcion != 'y') && (opcion != 'n')) {
if (pnodoedit->pkanji) {
snprintf(str, TAM_BUF, "%s (%s) -> \"%s\" ¿ok? (y/n): ",pnodoedit->pkanji,pnodoedit->phiragana,secmea);
} else {
snprintf(str, TAM_BUF, "%s -> %s \"¿ok?\" (y/n): ",pnodoedit->phiragana,secmea);
}
print_buffer(str, true);
upgrade_buffer(true);
opcion = wgetch(pant->ppal);
print_buffer_new_line();
}
if (opcion == 'y') {
if (!pnodoedit->pmeaning) {
pnodoedit->pmeaning = (char *)malloc ((strlen(secmea)+1)*sizeof(char));
if (!pnodoedit->pmeaning)
exit_mem(EXIT_FAILURE,"Not enough memory.");
} else {
pnodoedit->pmeaning = (char *)realloc (pnodoedit->pmeaning,(strlen(secmea)+1)*sizeof(char));
if (!pnodoedit->pmeaning)
exit_mem(EXIT_FAILURE,"Not enough memory.");
}
strcpy(pnodoedit->pmeaning, secmea);
print_buffer("\nRenaming...", true);
} else {
print_buffer("\nCancelling...", true);
}
if (str) {
free(str);
str=NULL;
}
}
开发者ID:aperezm-vlex,项目名称:himitsu,代码行数:50,代码来源:vocab.c
注:本文中的print_buffer函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论