• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ put_module函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中put_module函数的典型用法代码示例。如果您正苦于以下问题:C++ put_module函数的具体用法?C++ put_module怎么用?C++ put_module使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了put_module函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: find_graphics_card

static status_t
find_graphics_card(addr_t frameBuffer, addr_t& base, size_t& size)
{
	// TODO: when we port this over to the new driver API, this mechanism can be
	// used to find the right device_node
	pci_module_info* pci;
	if (get_module(B_PCI_MODULE_NAME, (module_info**)&pci) != B_OK)
		return B_ERROR;

	pci_info info;
	for (int32 index = 0; pci->get_nth_pci_info(index, &info) == B_OK; index++) {
		if (info.class_base != PCI_display)
			continue;

		// check PCI BARs
		for (uint32 i = 0; i < 6; i++) {
			if (info.u.h0.base_registers[i] <= frameBuffer
				&& info.u.h0.base_registers[i] + info.u.h0.base_register_sizes[i]
					> frameBuffer) {
				// found it!
				base = info.u.h0.base_registers[i];
				size = info.u.h0.base_register_sizes[i];

				put_module(B_PCI_MODULE_NAME);
				return B_OK;
			}
		}
	}

	put_module(B_PCI_MODULE_NAME);
	return B_ENTRY_NOT_FOUND;
}
开发者ID:mmadia,项目名称:Haiku-services-branch,代码行数:32,代码来源:vesa.cpp


示例2: init_driver

status_t
init_driver(void)
{
	SHOW_FLOW0(3, "");

	if (get_module(B_PCI_MODULE_NAME, (module_info **)&pci_bus) != B_OK)
		return B_ERROR;

	/* get a handle for the agp bus if it exists */
	get_module(B_AGP_GART_MODULE_NAME, (module_info **)&sAGP);

	/* driver private data */
	devices = (radeon_devices *)calloc(1, sizeof(radeon_devices));
	if (devices == NULL) {
		put_module(B_PCI_MODULE_NAME);
		if (sAGP != NULL)
			put_module(B_AGP_GART_MODULE_NAME);
		return B_ERROR;
	}

	(void)INIT_BEN(devices->kernel, "Radeon Kernel");

	GetDriverSettings();
	Radeon_ProbeDevices();
	return B_OK;
}
开发者ID:AmirAbrams,项目名称:haiku,代码行数:26,代码来源:driver.c


示例3: std_ops

static status_t std_ops(int32 op, ...)
{
    switch(op) {
    case B_MODULE_INIT:
        if (get_module(pci_name, (module_info **) &pci) != B_OK)
            return B_ERROR;

        if (get_module(cam_name, (module_info **) &cam) != B_OK) {
            put_module(pci_name);
            return B_ERROR;
        }

        if(sim_install_buslogic()) {
            return B_OK;
        }

        put_module(pci_name);
        put_module(cam_name);
        return B_ERROR;

    case B_MODULE_UNINIT:
        put_module(pci_name);
        put_module(cam_name);
        return B_OK;

    default:
        return B_ERROR;
    }
}
开发者ID:mmanley,项目名称:Antares,代码行数:29,代码来源:buslogic.c


示例4: uninit_driver

// called just before the kernel unloads the driver
void
uninit_driver(void)
{
	CALLED();

	int32 j;

	for (j = 0; j < MAX_BT_GENERIC_USB_DEVICES; j++) {

		if (publish_names[j] != NULL)
			free(publish_names[j]);

		if (bt_usb_devices[j] != NULL) {
			//	if (connected_dev != NULL) {
			//		debugf("Device %p still exists.\n",	connected_dev);
			//	}
			ERROR("%s: %s still present?\n", __func__, bt_usb_devices[j]->name);
			kill_device(bt_usb_devices[j]);
		}
	}

	usb->uninstall_notify(BLUETOOTH_DEVICE_DEVFS_NAME);

	remove_debugger_command("bth2generic", &dump_driver);

	// Releasing modules
	put_module(usb_name);
	put_module(hci_name);
	// TODO: netbuffers

	delete_sem(dev_table_sem);
}
开发者ID:mmuman,项目名称:haiku,代码行数:33,代码来源:h2generic.cpp


示例5: std_ops

static status_t std_ops(int32 op, ...)
{
	switch(op) {
	case B_MODULE_INIT:
#if DEBUG_SAFETY
		set_dprintf_enabled(true);
#endif
		load_driver_symbols("53c8xx");

		if (get_module(pci_name, (module_info **) &pci) != B_OK)
			return B_ERROR;

		if (get_module(cam_name, (module_info **) &cam) != B_OK) {
			put_module(pci_name);
			return B_ERROR;
		}

		if(sim_install_symbios()){
			return B_OK;
		}

		put_module(pci_name);
		put_module(cam_name);
		return B_ERROR;

	case B_MODULE_UNINIT:
		put_module(pci_name);
		put_module(cam_name);
		return B_OK;

	default:
		return B_ERROR;
	}
}
开发者ID:DonCN,项目名称:haiku,代码行数:34,代码来源:53c8xx.c


示例6: init_driver

status_t
init_driver(void)
{
	int i = 0;
	status_t err;
	num_cards = 0;

	TRACE("@@init_driver()\n");

	if (get_module(B_PCI_MODULE_NAME, (module_info **)&pci))
		return ENOSYS;

	if (get_module(B_MPU_401_MODULE_NAME, (module_info **) &mpu401)) {
		put_module(B_PCI_MODULE_NAME);
		return ENOSYS;
	}

	while ((*pci->get_nth_pci_info)(i, &cards[num_cards].info) == B_OK) {
		//TODO check other Vendor_ID and DEVICE_ID
		if ((cards[num_cards].info.vendor_id == ICE1712_VENDOR_ID)
			&& (cards[num_cards].info.device_id == ICE1712_DEVICE_ID)) {
			if (num_cards == NUM_CARDS) {
				TRACE("Too many ice1712 cards installed!\n");
				break;
			}

			if ((err = (*pci->reserve_device)(cards[num_cards].info.bus,
				cards[num_cards].info.device, cards[num_cards].info.function,
				DRIVER_NAME, &cards[num_cards])) < B_OK) {
				dprintf("%s: failed to reserve_device(%d, %d, %d,): %s\n",
					DRIVER_NAME, cards[num_cards].info.bus,
					cards[num_cards].info.device,
					cards[num_cards].info.function, strerror(err));
				continue;
			}
			if (ice1712_setup(&cards[num_cards]) != B_OK) {
			//Vendor_ID and Device_ID has been modified
				TRACE("Setup of ice1712 %d failed\n", (int)(num_cards + 1));
				(*pci->unreserve_device)(cards[num_cards].info.bus,
					cards[num_cards].info.device,
					cards[num_cards].info.function,
					DRIVER_NAME, &cards[num_cards]);
			} else {
				num_cards++;
			}
		}
		i++;
	}

	TRACE("Number of succesfully initialised card : %d\n", (int)num_cards);

	if (num_cards == 0) {
		put_module(B_PCI_MODULE_NAME);
		put_module(B_MPU_401_MODULE_NAME);
		return ENODEV;
	}
	return B_OK;
}
开发者ID:michael-manley,项目名称:haiku,代码行数:58,代码来源:ice1712.c


示例7: uninit_driver

void
uninit_driver(void)
{
	/* free the driver data */
	DELETE_BEN(pd->kernel);
	free(pd);
	pd = NULL;

	/* put the pci module away */
	put_module(B_PCI_MODULE_NAME);
	put_module(B_ISA_MODULE_NAME);
}
开发者ID:luciang,项目名称:haiku,代码行数:12,代码来源:driver.c


示例8: uninit_driver

void
uninit_driver(void)
{
	SHOW_FLOW0(3, "");
	DELETE_BEN(devices->kernel);

	free(devices);
	devices = NULL;

	put_module(B_PCI_MODULE_NAME);
	if (sAGP) 
		put_module(B_AGP_GART_MODULE_NAME);
}
开发者ID:AmirAbrams,项目名称:haiku,代码行数:13,代码来源:driver.c


示例9: uninit_driver

void
uninit_driver()
{
	int32 i = 0;
	for (i=0; i<devices_count; i++) {
		free (devices[i]);
	}
	free(devices);
	devices = NULL;

	put_module(DS_MODULE_NAME);
	put_module(CS_CLIENT_MODULE_NAME);
}
开发者ID:mmanley,项目名称:Antares,代码行数:13,代码来源:ds.c


示例10: uninit_driver

void uninit_driver(void) {

	/* free the driver data */
	DELETE_BEN(pd->kernel);
	free(pd);
	pd = NULL;

	/* put the pci module away */
	put_module(B_PCI_MODULE_NAME);
	put_module(B_ISA_MODULE_NAME);

	/* put the agp module away if it's there */
	if (agp_bus) put_module(B_AGP_MODULE_NAME);
}
开发者ID:looncraz,项目名称:haiku,代码行数:14,代码来源:driver.c


示例11: init_driver

status_t
init_driver(void)
{
	status_t ret = ENODEV;
	int i;

	TRACE("init_driver\n");

	if (get_module(B_PCI_MODULE_NAME, (module_info **)&gPciBus) != B_OK) {
		ret = B_ERROR;
		goto done;
	}

	if (!(gPd = calloc(1, sizeof(DeviceData)))) {
		put_module(B_PCI_MODULE_NAME);
		ret = B_ERROR;
		goto done;
	}

	/* Remember the PCI information */
	for (i = 0; (*gPciBus->get_nth_pci_info)(i, &gPd->pcii) == B_OK; i++) 
		if (gPd->pcii.vendor_id == PCI_VENDOR_ID_VMWARE &&
			gPd->pcii.device_id == PCI_DEVICE_ID_VMWARE_SVGA2) {
			ret = B_OK;
			break;
		}

	if (ret != B_OK) {
		free(gPd);
		put_module(B_PCI_MODULE_NAME);
		goto done;
	}

	/* Create a benaphore for exclusive access in OpenHook/FreeHook */
	INIT_BEN(gPd->kernel);

	/* The device name */
	gPd->names[0] = strdup("graphics/vmware");
	gPd->names[1] = NULL;

	/* Usual initializations */
	gPd->isOpen = 0;
	gPd->sharedArea = -1;
	gPd->si = NULL;

done:
	TRACE("init_driver: %ld\n", ret);
	return ret;
}
开发者ID:DonCN,项目名称:haiku,代码行数:49,代码来源:driver.c


示例12: init_hardware

status_t
init_hardware(void)
{
	long index = 0;
	pci_info pcii;
	bool found = false;

	/* choke if we can't find the PCI bus */
	if (get_module(B_PCI_MODULE_NAME, (module_info **)&pci_bus) != B_OK)
		return B_ERROR;

	/* choke if we can't find the ISA bus */
	if (get_module(B_ISA_MODULE_NAME, (module_info **)&isa_bus) != B_OK)
	{
		put_module(B_PCI_MODULE_NAME);
		return B_ERROR;
	}

	/* while there are more pci devices */
	while ((*pci_bus->get_nth_pci_info)(index, &pcii) == B_NO_ERROR) {
		int vendor = 0;

		/* if we match a supported vendor */
		while (SupportedDevices[vendor].vendor) {
			if (SupportedDevices[vendor].vendor == pcii.vendor_id) {
				uint16 *devices = SupportedDevices[vendor].devices;
				/* while there are more supported devices */
				while (*devices) {
					/* if we match a supported device */
					if (*devices == pcii.device_id ) {

						found = true;
						goto done;
					}
					/* next supported device */
					devices++;
				}
			}
			vendor++;
		}
		/* next pci_info struct, please */
		index++;
	}

done:
	/* put away the module manager */
	put_module(B_PCI_MODULE_NAME);
	return found ? B_OK : B_ERROR;
}
开发者ID:luciang,项目名称:haiku,代码行数:49,代码来源:driver.c


示例13: ethernet_init

status_t
ethernet_init(const char *name, net_device **_device)
{
	// make sure this is a device in /dev/net, but not the
	// networking (userland) stack driver
	if (strncmp(name, "/dev/net/", 9) || !strcmp(name, "/dev/net/stack")
		|| !strcmp(name, "/dev/net/userland_server"))
		return B_BAD_VALUE;

	status_t status = get_module(NET_BUFFER_MODULE_NAME, (module_info **)&gBufferModule);
	if (status < B_OK)
		return status;

	ethernet_device *device = new (std::nothrow) ethernet_device;
	if (device == NULL) {
		put_module(NET_BUFFER_MODULE_NAME);
		return B_NO_MEMORY;
	}

	memset(device, 0, sizeof(ethernet_device));

	strcpy(device->name, name);
	device->flags = IFF_BROADCAST | IFF_LINK;
	device->type = IFT_ETHER;
	device->mtu = 1500;
	device->media = IFM_ACTIVE | IFM_ETHER;
	device->header_length = ETHER_HEADER_LENGTH;
	device->fd = -1;

	*_device = device;
	return B_OK;
}
开发者ID:luciang,项目名称:haiku,代码行数:32,代码来源:ethernet.cpp


示例14: init_driver

extern "C" status_t
init_driver(void)
{
	TRACE((DEVICE_NAME ": init_driver()\n"));

	gDeviceInfo[0] = (vesa_info*)malloc(sizeof(vesa_info));
	if (gDeviceInfo[0] == NULL)
		return B_NO_MEMORY;

	memset(gDeviceInfo[0], 0, sizeof(vesa_info));

	status_t status = get_module(B_ISA_MODULE_NAME, (module_info**)&gISA);
	if (status != B_OK)
		goto err1;

	gDeviceNames[0] = strdup("graphics/vesa");
	if (gDeviceNames[0] == NULL) {
		status = B_NO_MEMORY;
		goto err2;
	}

	gDeviceNames[1] = NULL;

	mutex_init(&gLock, "vesa lock");
	return B_OK;

err2:
	put_module(B_ISA_MODULE_NAME);
err1:
	free(gDeviceInfo[0]);
	return status;
}
开发者ID:AmirAbrams,项目名称:haiku,代码行数:32,代码来源:driver.cpp


示例15: init_driver

status_t
init_driver(void)
{
	DPRINTF_INFO("init_driver(), built %s %s\n", __DATE__, __TIME__);

#if DEBUG_DRIVER
	if (load_driver_symbols(drivername) == B_OK) {
		DPRINTF_INFO("loaded symbols\n");
	} else {
		DPRINTF_INFO("no symbols for you!\n");
	}
#endif

	if (get_module(B_USB_MODULE_NAME, (module_info**) &usb) != B_OK) {
		DPRINTF_INFO("cannot get module \"%s\"\n", B_USB_MODULE_NAME);
		return B_ERROR;
	}

	if ((gDeviceListLock = create_sem(1, "dev_list_lock")) < 0) {
		put_module(B_USB_MODULE_NAME);
		return gDeviceListLock;
	}

	usb->register_driver(kDriverName, supported_devices,
		sizeof(supported_devices)/sizeof(usb_support_descriptor), NULL);
	usb->install_notify(kDriverName, &notify_hooks);

	return B_OK;
}
开发者ID:AmirAbrams,项目名称:haiku,代码行数:29,代码来源:driver.c


示例16: TRACE

Interface::~Interface()
{
	TRACE("Interface %p: destructor\n", this);

	put_device_interface(fDeviceInterface);

	// Uninitialize the domain datalink protocols

	DatalinkTable::Iterator iterator = fDatalinkTable.GetIterator();
	while (domain_datalink* datalink = iterator.Next()) {
		put_domain_datalink_protocols(this, datalink->domain);
	}

	// Free domain datalink objects

	domain_datalink* next = fDatalinkTable.Clear(true);
	while (next != NULL) {
		domain_datalink* datalink = next;
		next = next->hash_link;

		delete datalink;
	}

	recursive_lock_destroy(&fLock);

	// Release reference of the stack - at this point, our stack may be unloaded
	// if no other interfaces or sockets are left
	put_module(gNetStackInterfaceModule.info.name);
}
开发者ID:AmirAbrams,项目名称:haiku,代码行数:29,代码来源:interfaces.cpp


示例17: system

/*!	\brief Returns parameters for partitioning a session.

	The partitioning system (module) identified by \a identifier is asked to
	return parameters for the session. If the session is already partitioned
	using this system, then the parameters describing the current layout will
	be returned, otherwise default values.

	If the supplied buffer is too small for the parameters, the function
	returns \c B_OK, but doesn't fill in the buffer; the required buffer
	size is returned in \a actualSize. If the buffer is large enough,
	\a actualSize is set to the actually used size. The size includes the
	terminating null.

	\param deviceFD The device the session to be partitioned resides on.
	\param sessionIndex The index of the session to be partitioned.
	\param identifier A string identifying the partitioning system to be used.
	\param buffer Pointer to a pre-allocated buffer of size \a bufferSize.
	\param bufferSize The size of \a buffer.
	\param actualSize Pointer to a pre-allocated size_t to be set to the
		   actually needed buffer size.
	\return
	- \c B_OK: The parameters could be retrieved or the buffer is too
	  small. \a actualSize has to be checked!
	- another error code, if something went wrong
*/
status_t
get_partitioning_parameters(int deviceFD, int32 sessionIndex,
							const char *identifier, char *buffer,
							size_t bufferSize, size_t *actualSize)
{
	status_t error = (identifier && buffer && actualSize ? B_OK : B_BAD_VALUE);
	disk_scanner_module_info *diskScanner = NULL;
	session_info sessionInfo;
	// get the disk scanner module
	if (error == B_OK) {
		error = get_module(DISK_SCANNER_MODULE_NAME,
						   (module_info**)&diskScanner);
	}
	// get the session info
	if (error == B_OK) {
		error = diskScanner->get_nth_session_info(deviceFD, sessionIndex,
												  &sessionInfo, NULL);
	}
	// get the parameters
	if (error == B_OK) {
		error = diskScanner->get_partitioning_params(deviceFD, &sessionInfo,
			identifier, buffer, bufferSize, actualSize);
	}
	// put the partition scanner module
	if (diskScanner)
		put_module(diskScanner->module.name);
	return error;
}
开发者ID:looncraz,项目名称:haiku,代码行数:53,代码来源:disk_scanner.cpp


示例18: init_driver

status_t
init_driver()
{
	TRACE("init_driver() " __DATE__ " " __TIME__ "\n");
	if (get_module(B_USB_MODULE_NAME, (module_info **)&gUSBModule) != B_OK)
		return B_ERROR;

	gDeviceList = new(std::nothrow) DeviceList();
	if (gDeviceList == NULL) {
		put_module(B_USB_MODULE_NAME);
		return B_NO_MEMORY;
	}

	mutex_init(&sDriverLock, "usb hid driver lock");

	static usb_notify_hooks notifyHooks = {
		&usb_hid_device_added,
		&usb_hid_device_removed
	};

	static usb_support_descriptor supportDescriptor = {
		USB_INTERFACE_CLASS_HID, 0, 0, 0, 0
	};

	gUSBModule->register_driver(DRIVER_NAME, &supportDescriptor, 1, NULL);
	gUSBModule->install_notify(DRIVER_NAME, &notifyHooks);
	TRACE("init_driver() OK\n");
	return B_OK;
}
开发者ID:mmanley,项目名称:Antares,代码行数:29,代码来源:Driver.cpp


示例19: std_ops

static status_t
std_ops(int32 op, ...)
{
	void *handle;
	bool load = false;

	switch (op) {
	case B_MODULE_INIT:
		handle = load_driver_settings("kernel");
		if (handle) {
			load = get_driver_boolean_parameter(handle,
				"bochs_debug_output", load, true);
			unload_driver_settings(handle);
		}
		if (load) {
			if (get_module(B_ISA_MODULE_NAME, (module_info **)&sISAModule) < B_OK)
				return B_ERROR;
		}
		return load ? B_OK : B_ERROR;
	case B_MODULE_UNINIT:
		put_module(B_ISA_MODULE_NAME);
		return B_OK;
	}
	return B_BAD_VALUE;
}
开发者ID:mmanley,项目名称:Antares,代码行数:25,代码来源:bochs.cpp


示例20: bcd_std_ops

static status_t
bcd_std_ops(int32 op, ...)
{
    status_t status;

    switch (op) {
    case B_MODULE_INIT:
        new (&sConnectionList) DoublyLinkedList<HciConnection>;
        add_debugger_command("btConnections", &DumpHciConnections,
                             "Lists Bluetooth Connections with RemoteDevices & channels");

        status = get_module(NET_BUFFER_MODULE_NAME,
                            (module_info **)&gBufferModule);
        if (status < B_OK)
            return status;

        return B_OK;

        break;

    case B_MODULE_UNINIT:

        remove_debugger_command("btConnections", &DumpHciConnections);
        put_module(NET_BUFFER_MODULE_NAME);

        return B_OK;
        break;
    }

    return B_ERROR;
}
开发者ID:kallisti5,项目名称:haiku,代码行数:31,代码来源:BTCoreData.cpp



注:本文中的put_module函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ put_mtd_device函数代码示例发布时间:2022-05-30
下一篇:
C++ put_long函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap