本文整理汇总了C++中qemu_get_be32s函数的典型用法代码示例。如果您正苦于以下问题：C++ qemu_get_be32s函数的具体用法？C++ qemu_get_be32s怎么用？C++ qemu_get_be32s使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了qemu_get_be32s函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: tcx_load
static int tcx_load(QEMUFile *f, void *opaque, int version_id)
{
TCXState *s = opaque;
uint32_t dummy;
if (version_id != 3 && version_id != 4)
return -EINVAL;
if (version_id == 3) {
qemu_get_be32s(f, &dummy);
qemu_get_be32s(f, &dummy);
qemu_get_be32s(f, &dummy);
}
qemu_get_be16s(f, &s->height);
qemu_get_be16s(f, &s->width);
qemu_get_be16s(f, &s->depth);
qemu_get_buffer(f, s->r, 256);
qemu_get_buffer(f, s->g, 256);
qemu_get_buffer(f, s->b, 256);
qemu_get_8s(f, &s->dac_index);
qemu_get_8s(f, &s->dac_state);
update_palette_entries(s, 0, 256);
if (s->depth == 24)
tcx24_invalidate_display(s);
else
tcx_invalidate_display(s);
return 0;
}
开发者ID:BackupTheBerlios，项目名称:ar7-firmware-svn，代码行数:29，代码来源:tcx.c
示例2: ps2_common_load
static void ps2_common_load (QEMUFile *f, PS2State *s)
{
qemu_get_be32s (f, &s->write_cmd);
qemu_get_be32s (f, &s->queue.rptr);
qemu_get_be32s (f, &s->queue.wptr);
qemu_get_be32s (f, &s->queue.count);
qemu_get_buffer (f, s->queue.data, sizeof (s->queue.data));
}
开发者ID:hackndev，项目名称:qemu，代码行数:8，代码来源:ps2.c
示例3: get_cpudouble
static int get_cpudouble(QEMUFile *f, void *pv, size_t size,
VMStateField *field)
{
CPU_DoubleU *v = pv;
qemu_get_be32s(f, &v->l.upper);
qemu_get_be32s(f, &v->l.lower);
return 0;
}
开发者ID:mmuman，项目名称:qemu，代码行数:8，代码来源:vmstate.c
示例4: cpu_get_timer
void cpu_get_timer(QEMUFile *f, CPUTimer *s)
{
qemu_get_be32s(f, &s->frequency);
qemu_get_be32s(f, &s->disabled);
qemu_get_be64s(f, &s->disabled_mask);
qemu_get_sbe64s(f, &s->clock_offset);
qemu_get_timer(f, s->qtimer);
}
开发者ID:nvgreensocs，项目名称:qemu-arm-mmio，代码行数:9，代码来源:sun4u.c
示例5: ps2_kbd_load
static int ps2_kbd_load(QEMUFile* f, void* opaque, int version_id)
{
PS2KbdState *s = (PS2KbdState*)opaque;
if (version_id != 2)
return -EINVAL;
ps2_common_load (f, &s->common);
qemu_get_be32s(f, &s->scan_enabled);
qemu_get_be32s(f, &s->translate);
return 0;
}
开发者ID:hackndev，项目名称:qemu，代码行数:12，代码来源:ps2.c
示例6: load_fpu
static void load_fpu(QEMUFile *f, CPUMIPSFPUContext *fpu)
{
int i;
for(i = 0; i < 32; i++)
qemu_get_be64s(f, &fpu->fpr[i].d);
qemu_get_s8s(f, &fpu->fp_status.float_detect_tininess);
qemu_get_s8s(f, &fpu->fp_status.float_rounding_mode);
qemu_get_s8s(f, &fpu->fp_status.float_exception_flags);
qemu_get_be32s(f, &fpu->fcr0);
qemu_get_be32s(f, &fpu->fcr31);
}
开发者ID:CriGio，项目名称:platform_external_qemu，代码行数:12，代码来源:machine.c
示例7: get_tlb
static int get_tlb(QEMUFile *f, void *pv, size_t size)
{
r4k_tlb_t *v = pv;
uint16_t flags;
qemu_get_betls(f, &v->VPN);
qemu_get_be32s(f, &v->PageMask);
qemu_get_8s(f, &v->ASID);
qemu_get_be16s(f, &flags);
v->G = (flags >> 10) & 1;
v->C0 = (flags >> 7) & 3;
v->C1 = (flags >> 4) & 3;
v->V0 = (flags >> 3) & 1;
v->V1 = (flags >> 2) & 1;
v->D0 = (flags >> 1) & 1;
v->D1 = (flags >> 0) & 1;
v->EHINV = (flags >> 15) & 1;
v->RI1 = (flags >> 14) & 1;
v->RI0 = (flags >> 13) & 1;
v->XI1 = (flags >> 12) & 1;
v->XI0 = (flags >> 11) & 1;
qemu_get_betls(f, &v->PFN[0]);
qemu_get_betls(f, &v->PFN[1]);
return 0;
}
开发者ID:AdrianHuang，项目名称:qemu，代码行数:26，代码来源:machine.c
示例8: pxa2xx_keypad_load
static int pxa2xx_keypad_load(QEMUFile *f, void *opaque, int version_id)
{
PXA2xxKeyPadState *s = (PXA2xxKeyPadState *) opaque;
qemu_get_be32s(f, &s->kpc);
qemu_get_be32s(f, &s->kpdk);
qemu_get_be32s(f, &s->kprec);
qemu_get_be32s(f, &s->kpmk);
qemu_get_be32s(f, &s->kpas);
qemu_get_be32s(f, &s->kpasmkp[0]);
qemu_get_be32s(f, &s->kpasmkp[1]);
qemu_get_be32s(f, &s->kpasmkp[2]);
qemu_get_be32s(f, &s->kpasmkp[3]);
qemu_get_be32s(f, &s->kpkdi);
return 0;
}
开发者ID:Anastasiia-Lada，项目名称:QEMU-s5l89xx-port，代码行数:17，代码来源:pxa2xx_keypad.c
示例9: get_uint32_equal
static int get_uint32_equal(QEMUFile *f, void *pv, size_t size)
{
uint32_t *v = pv;
uint32_t v2;
qemu_get_be32s(f, &v2);
if (*v == v2) {
return 0;
}
return -EINVAL;
}
开发者ID:Bludge0n，项目名称:qemu，代码行数:11，代码来源:vmstate.c
示例10: ps2_mouse_load
static int ps2_mouse_load(QEMUFile* f, void* opaque, int version_id)
{
PS2MouseState *s = (PS2MouseState*)opaque;
if (version_id != 2)
return -EINVAL;
ps2_common_load (f, &s->common);
qemu_get_8s(f, &s->mouse_status);
qemu_get_8s(f, &s->mouse_resolution);
qemu_get_8s(f, &s->mouse_sample_rate);
qemu_get_8s(f, &s->mouse_wrap);
qemu_get_8s(f, &s->mouse_type);
qemu_get_8s(f, &s->mouse_detect_state);
qemu_get_be32s(f, &s->mouse_dx);
qemu_get_be32s(f, &s->mouse_dy);
qemu_get_be32s(f, &s->mouse_dz);
qemu_get_8s(f, &s->mouse_buttons);
return 0;
}
开发者ID:hackndev，项目名称:qemu，代码行数:20，代码来源:ps2.c
示例11: dma_load
static int dma_load(QEMUFile *f, void *opaque, int version_id)
{
DMAState *s = opaque;
unsigned int i;
if (version_id != 1)
return -EINVAL;
for (i = 0; i < DMA_REGS; i++)
qemu_get_be32s(f, &s->dmaregs[i]);
return 0;
}
开发者ID:AmesianX，项目名称:winkvm，代码行数:12，代码来源:sparc32_dma.c
示例12: get_uint32_equal
static int get_uint32_equal(QEMUFile *f, void *pv, size_t size,
VMStateField *field)
{
uint32_t *v = pv;
uint32_t v2;
qemu_get_be32s(f, &v2);
if (*v == v2) {
return 0;
}
error_report("%" PRIx32 " != %" PRIx32, *v, v2);
return -EINVAL;
}
开发者ID:mmuman，项目名称:qemu，代码行数:13，代码来源:vmstate.c
示例13: pxa2xx_mmci_load
static int pxa2xx_mmci_load(QEMUFile *f, void *opaque, int version_id)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
int i;
qemu_get_be32s(f, &s->status);
qemu_get_be32s(f, &s->clkrt);
qemu_get_be32s(f, &s->spi);
qemu_get_be32s(f, &s->cmdat);
qemu_get_be32s(f, &s->resp_tout);
qemu_get_be32s(f, &s->read_tout);
s->blklen = qemu_get_be32(f);
s->numblk = qemu_get_be32(f);
qemu_get_be32s(f, &s->intmask);
qemu_get_be32s(f, &s->intreq);
s->cmd = qemu_get_be32(f);
qemu_get_be32s(f, &s->arg);
s->cmdreq = qemu_get_be32(f);
s->active = qemu_get_be32(f);
s->bytesleft = qemu_get_be32(f);
s->tx_len = qemu_get_byte(f);
s->tx_start = 0;
if (s->tx_len >= sizeof(s->tx_fifo) || s->tx_len < 0)
return -EINVAL;
for (i = 0; i < s->tx_len; i ++)
s->tx_fifo[i] = qemu_get_byte(f);
s->rx_len = qemu_get_byte(f);
s->rx_start = 0;
if (s->rx_len >= sizeof(s->rx_fifo) || s->rx_len < 0)
return -EINVAL;
for (i = 0; i < s->rx_len; i ++)
s->rx_fifo[i] = qemu_get_byte(f);
s->resp_len = qemu_get_byte(f);
if (s->resp_len > 9 || s->resp_len < 0)
return -EINVAL;
for (i = s->resp_len; i < 9; i ++)
qemu_get_be16s(f, &s->resp_fifo[i]);
return 0;
}
开发者ID:16aug，项目名称:nvmeqemu，代码行数:43，代码来源:pxa2xx_mmci.c
示例14: cs_load
static int cs_load(QEMUFile *f, void *opaque, int version_id)
{
CSState *s = opaque;
unsigned int i;
if (version_id > 1)
return -EINVAL;
for (i = 0; i < CS_REGS; i++)
qemu_get_be32s(f, &s->regs[i]);
qemu_get_buffer(f, s->dregs, CS_DREGS);
return 0;
}
开发者ID:AmesianX，项目名称:winkvm，代码行数:14，代码来源:cs4231.c
示例15: sbi_load
static int sbi_load(QEMUFile *f, void *opaque, int version_id)
{
SBIState *s = opaque;
unsigned int i;
if (version_id != 1)
return -EINVAL;
for (i = 0; i < MAX_CPUS; i++) {
qemu_get_be32s(f, &s->intreg_pending[i]);
}
return 0;
}
开发者ID:ESOS-Lab，项目名称:VSSIM，代码行数:14，代码来源:sbi.c
示例16: virtio_load
int virtio_load(VirtIODevice *vdev, QEMUFile *f)
{
int num, i, ret;
uint32_t features;
uint32_t supported_features =
vdev->binding->get_features(vdev->binding_opaque);
if (vdev->binding->load_config) {
ret = vdev->binding->load_config(vdev->binding_opaque, f);
if (ret)
return ret;
}
qemu_get_8s(f, &vdev->status);
qemu_get_8s(f, &vdev->isr);
qemu_get_be16s(f, &vdev->queue_sel);
qemu_get_be32s(f, &features);
if (features & ~supported_features) {
fprintf(stderr, "Features 0x%x unsupported. Allowed features: 0x%x\n",
features, supported_features);
return -1;
}
vdev->guest_features = features;
vdev->config_len = qemu_get_be32(f);
qemu_get_buffer(f, vdev->config, vdev->config_len);
num = qemu_get_be32(f);
for (i = 0; i < num; i++) {
vdev->vq[i].vring.num = qemu_get_be32(f);
vdev->vq[i].pa = qemu_get_be64(f);
qemu_get_be16s(f, &vdev->vq[i].last_avail_idx);
if (vdev->vq[i].pa) {
virtqueue_init(&vdev->vq[i]);
}
if (vdev->binding->load_queue) {
ret = vdev->binding->load_queue(vdev->binding_opaque, i, f);
if (ret)
return ret;
}
}
virtio_notify_vector(vdev, VIRTIO_NO_VECTOR);
return 0;
}
开发者ID:iggy，项目名称:qemu，代码行数:46，代码来源:virtio.c
示例17: vmmouse_load
static int vmmouse_load(QEMUFile *f, void *opaque, int version_id)
{
VMMouseState *s = (VMMouseState *)opaque;
int i;
if (version_id != 0)
return -EINVAL;
if (qemu_get_be32(f) != VMMOUSE_QUEUE_SIZE)
return -EINVAL;
for (i = 0; i < VMMOUSE_QUEUE_SIZE; i++)
qemu_get_be32s(f, &s->queue[i]);
qemu_get_be16s(f, &s->nb_queue);
qemu_get_be16s(f, &s->status);
qemu_get_8s(f, &s->absolute);
vmmouse_update_handler(s);
return 0;
}
开发者ID:doniexun，项目名称:MemCheck，代码行数:20，代码来源:vmmouse.c
示例18: s3c_rtc_load
static int s3c_rtc_load(QEMUFile *f, void *opaque, int version_id)
{
struct s3c_rtc_state_s *s = (struct s3c_rtc_state_s *) opaque;
qemu_get_sbe64s(f, &s->next);
qemu_get_8s(f, &s->control);
qemu_get_8s(f, &s->tick);
qemu_get_8s(f, &s->alarm);
qemu_get_8s(f, &s->almsec);
qemu_get_8s(f, &s->almmin);
qemu_get_8s(f, &s->almday);
qemu_get_8s(f, &s->almhour);
qemu_get_8s(f, &s->almmon);
qemu_get_8s(f, &s->almyear);
qemu_get_8s(f, &s->reset);
qemu_get_be32s(f, &s->sec);
s->enable = (s->control == 0x1);
s3c_rtc_tick_mod(s);
return 0;
}
开发者ID:polachok，项目名称:qemu-n311，代码行数:21，代码来源:s3c24xx_rtc.c
示例19: mipsnet_load
static int mipsnet_load(QEMUFile *f, void *opaque, int version_id)
{
MIPSnetState *s = opaque;
if (version_id > 0)
return -EINVAL;
qemu_get_be32s(f, &s->busy);
qemu_get_be32s(f, &s->rx_count);
qemu_get_be32s(f, &s->rx_read);
qemu_get_be32s(f, &s->tx_count);
qemu_get_be32s(f, &s->tx_written);
qemu_get_be32s(f, &s->intctl);
qemu_get_buffer(f, s->rx_buffer, MAX_ETH_FRAME_SIZE);
qemu_get_buffer(f, s->tx_buffer, MAX_ETH_FRAME_SIZE);
return 0;
}
开发者ID:SymbianSource，项目名称:oss.FCL.interim.QEMU，代码行数:18，代码来源:mipsnet.c
示例20: esp_load
static int esp_load(QEMUFile *f, void *opaque, int version_id)
{
ESPState *s = opaque;
if (version_id != 3)
return -EINVAL; // Cannot emulate 2
qemu_get_buffer(f, s->rregs, ESP_REGS);
qemu_get_buffer(f, s->wregs, ESP_REGS);
qemu_get_sbe32s(f, &s->ti_size);
qemu_get_be32s(f, &s->ti_rptr);
qemu_get_be32s(f, &s->ti_wptr);
qemu_get_buffer(f, s->ti_buf, TI_BUFSZ);
qemu_get_be32s(f, &s->sense);
qemu_get_be32s(f, &s->dma);
qemu_get_buffer(f, s->cmdbuf, TI_BUFSZ);
qemu_get_be32s(f, &s->cmdlen);
qemu_get_be32s(f, &s->do_cmd);
qemu_get_be32s(f, &s->dma_left);
return 0;
}
开发者ID:SymbianSource，项目名称:oss.FCL.interim.QEMU，代码行数:22，代码来源:esp.c
注：本文中的qemu_get_be32s函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论