本文整理汇总了C++中qemu_system_shutdown_request函数的典型用法代码示例。如果您正苦于以下问题：C++ qemu_system_shutdown_request函数的具体用法？C++ qemu_system_shutdown_request怎么用？C++ qemu_system_shutdown_request使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了qemu_system_shutdown_request函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: pm_ioport_writew
static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
addr &= 0x3f;
switch(addr) {
case 0x00:
{
int64_t d;
int pmsts;
pmsts = get_pmsts(s);
if (pmsts & val & TMROF_EN) {
/* if TMRSTS is reset, then compute the new overflow time */
d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ,
get_ticks_per_sec());
s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
}
s->pmsts &= ~val;
pm_update_sci(s);
}
break;
case 0x02:
s->pmen = val;
qemu_system_wakeup_enable(QEMU_WAKEUP_REASON_RTC, val & RTC_EN);
qemu_system_wakeup_enable(QEMU_WAKEUP_REASON_PMTIMER, val & TMROF_EN);
pm_update_sci(s);
break;
case 0x04:
{
int sus_typ;
s->pmcntrl = val & ~(SUS_EN);
if (val & SUS_EN) {
/* change suspend type */
sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request();
break;
case 1:
qemu_system_suspend_request();
break;
default:
if (sus_typ == s->s4_val) { /* S4 request */
monitor_protocol_event(QEVENT_SUSPEND_DISK, NULL);
qemu_system_shutdown_request();
}
break;
}
}
}
break;
default:
break;
}
开发者ID:zhufeng001，项目名称:qemu-kvm_git，代码行数:53，代码来源:acpi.c
示例2: replay_next_event_is
bool replay_next_event_is(int event)
{
bool res = false;
/* nothing to skip - not all instructions used */
if (replay_state.instructions_count != 0) {
assert(replay_state.data_kind == EVENT_INSTRUCTION);
return event == EVENT_INSTRUCTION;
}
while (true) {
if (event == replay_state.data_kind) {
res = true;
}
switch (replay_state.data_kind) {
case EVENT_SHUTDOWN:
replay_finish_event();
qemu_system_shutdown_request();
break;
default:
/* clock, time_t, checkpoint and other events */
return res;
}
}
return res;
}
开发者ID:Icenowy，项目名称:qemu，代码行数:26，代码来源:replay.c
示例3: sys_write
static void sys_write(void *opaque, target_phys_addr_t addr,
uint64_t value, unsigned size)
{
LM32SysState *s = opaque;
char *testname;
trace_lm32_sys_memory_write(addr, value);
addr >>= 2;
switch (addr) {
case R_CTRL:
qemu_system_shutdown_request();
break;
case R_PASSFAIL:
s->regs[addr] = value;
testname = (char *)s->testname;
qemu_log("TC %-16s %s\n", testname, (value) ? "FAILED" : "OK");
break;
case R_TESTNAME:
s->regs[addr] = value;
copy_testname(s);
break;
default:
error_report("lm32_sys: write access to unknown register 0x"
TARGET_FMT_plx, addr << 2);
break;
}
}
开发者ID:ft-，项目名称:ox820-qemu，代码行数:29，代码来源:lm32_sys.c
示例4: sys_write
static void sys_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
LM32SysState *s = opaque;
char *testname;
trace_lm32_sys_memory_write(addr, value);
addr >>= 2;
switch (addr) {
case R_CTRL:
qemu_system_shutdown_request();
break;
case R_PASSFAIL:
s->regs[addr] = value;
testname = (char *)s->testname;
fprintf(stderr, "TC %-*s %s\n", MAX_TESTNAME_LEN,
testname, (value) ? "FAILED" : "OK");
if (value) {
cpu_dump_state(qemu_get_cpu(0), stderr, fprintf, 0);
}
break;
case R_TESTNAME:
s->regs[addr] = value;
copy_testname(s);
break;
default:
error_report("lm32_sys: write access to unknown register 0x"
TARGET_FMT_plx, addr << 2);
break;
}
}
开发者ID:DeanSinaean，项目名称:qemu，代码行数:33，代码来源:lm32_sys.c
示例5: power_mem_write
/* Power */
static void power_mem_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
/* According to a real Ultra 5, bit 24 controls the power */
if (val & 0x1000000) {
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
}
开发者ID:Marshalzxy，项目名称:qemu，代码行数:9，代码来源:sun4u.c
示例6: mips_qemu_writel
static void mips_qemu_writel (void *opaque, target_phys_addr_t addr,
uint32_t val)
{
if ((addr & 0xffff) == 0 && val == 42)
qemu_system_reset_request ();
else if ((addr & 0xffff) == 4 && val == 42)
qemu_system_shutdown_request ();
}
开发者ID:AmesianX，项目名称:qemu-kvm，代码行数:8，代码来源:mips_r4k.c
示例7: mips_qemu_write
static void mips_qemu_write (void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
if ((addr & 0xffff) == 0 && val == 42)
qemu_system_reset_request ();
else if ((addr & 0xffff) == 4 && val == 42)
qemu_system_shutdown_request ();
}
开发者ID:Distrotech，项目名称:qemu，代码行数:8，代码来源:mips_r4k.c
示例8: mips_qemu_write
static void mips_qemu_write (void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
if ((addr & 0xffff) == 0 && val == 42)
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
else if ((addr & 0xffff) == 4 && val == 42)
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
开发者ID:8tab，项目名称:qemu，代码行数:8，代码来源:mips_r4k.c
示例9: sysctl_icap_write
static void sysctl_icap_write(MilkymistSysctlState *s, uint32_t value)
{
trace_milkymist_sysctl_icap_write(value);
switch (value & 0xffff) {
case 0x000e:
qemu_system_shutdown_request();
break;
}
}
开发者ID:khaleghzadeh，项目名称:esesc，代码行数:9，代码来源:milkymist-sysctl.c
示例10: rtas_power_off
static void rtas_power_off(PowerPCCPU *cpu, sPAPREnvironment *spapr,
uint32_t token, uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets)
{
if (nargs != 2 || nret != 1) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
qemu_system_shutdown_request();
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
开发者ID:DeanSinaean，项目名称:qemu，代码行数:11，代码来源:spapr_rtas.c
示例11: acpi_pm1_cnt_write
void acpi_pm1_cnt_write(ACPIREGS *ar, uint16_t val, char s4)
{
ar->pm1.cnt.cnt = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
if (val & ACPI_BITMASK_SLEEP_ENABLE) {
/* change suspend type */
uint16_t sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request();
break;
case 1:
qemu_system_suspend_request();
break;
default:
if (sus_typ == s4) { /* S4 request */
qemu_system_shutdown_request();
}
break;
}
}
开发者ID:D3cedut0，项目名称:QEMU，代码行数:21，代码来源:acpi.c
示例12: pm_ioport_writew
static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
addr &= 0x3f;
switch(addr) {
case 0x00:
{
int64_t d;
int pmsts;
pmsts = get_pmsts(s);
if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
/* if TMRSTS is reset, then compute the new overflow time */
d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
get_ticks_per_sec());
s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
}
s->pmsts &= ~val;
pm_update_sci(s);
}
break;
case 0x02:
s->pmen = val;
pm_update_sci(s);
break;
case 0x04:
{
int sus_typ;
s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
if (val & ACPI_BITMASK_SLEEP_ENABLE) {
/* change suspend type */
sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request();
break;
case 1:
/* ACPI_BITMASK_WAKE_STATUS should be set on resume.
Pretend that resume was caused by power button */
s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
ACPI_BITMASK_POWER_BUTTON_STATUS);
qemu_system_reset_request();
if (s->cmos_s3) {
qemu_irq_raise(s->cmos_s3);
}
default:
break;
}
}
}
break;
default:
break;
}
开发者ID:EgoIncarnate，项目名称:qemu-rr，代码行数:53，代码来源:acpi_piix4.c
示例13: rtas_power_off
static void rtas_power_off(PowerPCCPU *cpu, sPAPRMachineState *spapr,
uint32_t token, uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets)
{
if (nargs != 2 || nret != 1) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
cpu_stop_current();
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
开发者ID:CRYP706URU，项目名称:pyrebox，代码行数:12，代码来源:spapr_rtas.c
示例14: pm_ioport_writew
static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
addr &= 0x3f;
switch(addr) {
case 0x00:
{
int64_t d;
int pmsts;
pmsts = get_pmsts(s);
if (pmsts & val & TMROF_EN) {
/* if TMRSTS is reset, then compute the new overflow time */
d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ,
get_ticks_per_sec());
s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
}
s->pmsts &= ~val;
pm_update_sci(s);
}
break;
case 0x02:
s->pmen = val;
pm_update_sci(s);
break;
case 0x04:
{
int sus_typ;
s->pmcntrl = val & ~(SUS_EN);
if (val & SUS_EN) {
/* change suspend type */
sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request();
break;
case 1:
/* RSM_STS should be set on resume. Pretend that resume
was caused by power button */
s->pmsts |= (RSM_STS | PWRBTN_STS);
qemu_system_reset_request();
#if defined(TARGET_I386)
cmos_set_s3_resume();
#endif
default:
break;
}
}
}
break;
default:
break;
}
开发者ID:TheLoneRanger14，项目名称:vmxray，代码行数:52，代码来源:acpi.c
示例15: acpi_pm1_cnt_write
/* ACPI PM1aCNT */
static void acpi_pm1_cnt_write(ACPIREGS *ar, uint16_t val)
{
ar->pm1.cnt.cnt = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
if (val & ACPI_BITMASK_SLEEP_ENABLE) {
/* change suspend type */
uint16_t sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request();
break;
case 1:
qemu_system_suspend_request();
break;
default:
if (sus_typ == ar->pm1.cnt.s4_val) { /* S4 request */
monitor_protocol_event(QEVENT_SUSPEND_DISK, NULL);
qemu_system_shutdown_request();
}
break;
}
}
开发者ID:Blopeur，项目名称:qemu-heca，代码行数:23，代码来源:acpi.c
示例16: acpi_pm1_cnt_write
/* ACPI PM1aCNT */
static void acpi_pm1_cnt_write(ACPIREGS *ar, uint16_t val)
{
ar->pm1.cnt.cnt = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
if (val & ACPI_BITMASK_SLEEP_ENABLE) {
/* change suspend type */
uint16_t sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
break;
case 1:
qemu_system_suspend_request();
break;
default:
if (sus_typ == ar->pm1.cnt.s4_val) { /* S4 request */
qapi_event_send_suspend_disk();
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
break;
}
}
开发者ID:MaddTheSane，项目名称:qemu，代码行数:23，代码来源:core.c
示例17: emulator_window_refresh
/* called periodically to poll for user input events */
static void emulator_window_refresh(EmulatorWindow* emulator)
{
/* this will eventually call sdl_update if the content of the VGA framebuffer
* has changed */
qframebuffer_check_updates();
if (emulator->ui) {
if (skin_ui_process_events(emulator->ui)) {
// Quit program.
skin_ui_free(emulator->ui);
emulator->ui = NULL;
qemu_system_shutdown_request();
}
}
}
开发者ID:Dorahe，项目名称:platform_external_qemu，代码行数:16，代码来源:emulator-window.c
示例18: slavio_aux2_mem_writeb
static void slavio_aux2_mem_writeb(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
MiscState *s = opaque;
val &= AUX2_PWRINTCLR | AUX2_PWROFF;
trace_slavio_aux2_mem_writeb(val & 0xff);
val |= s->aux2 & AUX2_PWRFAIL;
if (val & AUX2_PWRINTCLR) // Clear Power Fail int
val &= AUX2_PWROFF;
s->aux2 = val;
if (val & AUX2_PWROFF)
qemu_system_shutdown_request();
slavio_misc_update_irq(s);
}
开发者ID:BreakawayConsulting，项目名称:QEMU，代码行数:15，代码来源:slavio_misc.c
示例19: hb_regs_write
static void hb_regs_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
uint32_t *regs = opaque;
if (offset == 0xf00) {
if (value == 1 || value == 2) {
qemu_system_reset_request();
} else if (value == 3) {
qemu_system_shutdown_request();
}
}
regs[offset/4] = value;
}
开发者ID:CasonChan，项目名称:qemu，代码行数:15，代码来源:highbank.c
示例20: s390_handle_wait
void s390_handle_wait(S390CPU *cpu)
{
CPUState *cs = CPU(cpu);
if (s390_cpu_halt(cpu) == 0) {
#ifndef CONFIG_USER_ONLY
if (is_special_wait_psw(cpu->env.psw.addr)) {
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
} else {
cpu->env.crash_reason = S390_CRASH_REASON_DISABLED_WAIT;
qemu_system_guest_panicked(cpu_get_crash_info(cs));
}
#endif
}
}
开发者ID:CTU-IIG，项目名称:qemu，代码行数:15，代码来源:helper.c
注：本文中的qemu_system_shutdown_request函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论