C++ qglUnlockArraysEXT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中qglUnlockArraysEXT函数的典型用法代码示例。如果您正苦于以下问题：C++ qglUnlockArraysEXT函数的具体用法？C++ qglUnlockArraysEXT怎么用？C++ qglUnlockArraysEXT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了qglUnlockArraysEXT函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DrawCel

//DRAWCEL
static void DrawCel (shaderCommands_t *input) {

	GL_Bind( tr.whiteImage );
	qglColor3f (1,1,1);

	GL_State( GLS_POLYMODE_LINE | GLS_DEPTHMASK_TRUE );

	qglDisableClientState (GL_COLOR_ARRAY);
	qglDisableClientState (GL_TEXTURE_COORD_ARRAY);

	qglVertexPointer (3, GL_FLOAT, 16, input->xyz);	// padded for SIMD

	if (qglLockArraysEXT) {
		qglLockArraysEXT(0, input->numVertexes);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	R_DrawCel( input->numIndexes, input->indexes );

	if (qglUnlockArraysEXT) {
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

}

开发者ID:massivehaxxor，项目名称:tremfusion，代码行数:26，代码来源:tr_shade.c

示例2: DrawTris

/*
================
DrawTris

Draws triangle outlines for debugging
================
*/
static void DrawTris (shaderCommands_t *input) {
	GL_Bind( tr.whiteImage );
	qglColor3f (1,1,1);

	GL_State( GLS_POLYMODE_LINE | GLS_DEPTHMASK_TRUE );
	qglDepthRange( 0, 0 );

	qglDisableClientState (GL_COLOR_ARRAY);
	qglDisableClientState (GL_TEXTURE_COORD_ARRAY);

	qglVertexPointer (3, GL_FLOAT, 16, input->xyz);	// padded for SIMD

	if (qglLockArraysEXT) {
		qglLockArraysEXT(0, input->numVertexes);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	#ifdef HAVE_GLES
	qglDrawElements( GL_LINE_STRIP, 
					input->numIndexes,
					GL_INDEX_TYPE,
					input->indexes );
	#else
	R_DrawElements( input->numIndexes, input->indexes );
	#endif

	if (qglUnlockArraysEXT) {
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}
	qglDepthRange( 0, 1 );
}

开发者ID:ptitSeb，项目名称:ioq3，代码行数:39，代码来源:tr_shade.c

示例3: qglMatrixMode

void CMistyFog2::Render(CWorldEffectsSystem *system)
{
	if (mFadeAlpha <= 0.0)
	{
		return;
	}

	qglMatrixMode(GL_PROJECTION);
	qglPushMatrix();
    qglLoadIdentity ();
	MYgluPerspective (80.0,  1.0,  4,  2048.0);

	qglMatrixMode(GL_MODELVIEW);
	qglPushMatrix();
    qglLoadIdentity ();
    qglRotatef (-90,  1, 0, 0);	    // put Z going up
    qglRotatef (90,  0, 0, 1);	    // put Z going up
    qglRotatef (0,  1, 0, 0);
    qglRotatef (-90,  0, 1, 0);
    qglRotatef (-90,  0, 0, 1);

	qglDisable(GL_TEXTURE_2D);
	GL_State(GLS_SRCBLEND_SRC_ALPHA|GLS_DSTBLEND_ONE);
	qglShadeModel (GL_SMOOTH);

	qglColorPointer(4, GL_FLOAT, 0, mColors);
	qglEnableClientState(GL_COLOR_ARRAY);

	qglVertexPointer( 3, GL_FLOAT, 0, mVerts );
	qglEnableClientState(GL_VERTEX_ARRAY);

	if (qglLockArraysEXT) 
	{
		qglLockArraysEXT(0, MISTYFOG_HEIGHT*MISTYFOG_WIDTH);
	}
	qglDrawElements(GL_QUADS, (MISTYFOG_HEIGHT-1)*(MISTYFOG_WIDTH-1)*4, GL_UNSIGNED_INT, mIndexes);
	if ( qglUnlockArraysEXT ) 
	{
		qglUnlockArraysEXT();
	}

	qglDisableClientState(GL_COLOR_ARRAY);
//	qglDisableClientState(GL_VERTEX_ARRAY);	 backend doesn't ever re=enable this properly

	qglPopMatrix();
	qglMatrixMode(GL_PROJECTION);
	qglPopMatrix();
	qglMatrixMode(GL_MODELVIEW);	// bug somewhere in the backend which requires this
}

开发者ID:5Quintessential，项目名称:jedioutcast，代码行数:49，代码来源:tr_worldeffects.cpp

示例4: RB_OutlinesPass

/*
===================
RB_OutlinesPass

Draws outlines on surfaces with shader.hasOutlines set
===================
*/
static void RB_OutlinesPass( void ) {	

	int		outlines;
	float	outlinesAlpha;

	outlines		= r_outlines->value;
	outlinesAlpha	= r_outlinesAlpha->value;

	if ( !tess.shader->hasOutlines )
		return;	

	if ( !r_outlines->integer )
		return;

	GL_Bind( tr.whiteImage );
	qglColor4f( 0, 0, 0, outlinesAlpha );
		
	GL_State( GLS_POLYMODE_LINE | GLS_DEPTHMASK_TRUE | GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA );
	qglPolygonMode( GL_BACK, GL_LINE );
	qglLineWidth( outlines + 1 );
			
	qglCullFace( GL_BACK );
		
	qglDisableClientState( GL_COLOR_ARRAY );
	qglDisableClientState( GL_TEXTURE_COORD_ARRAY );

	qglVertexPointer (3, GL_FLOAT, 16, tess.xyz);	// padded for SIMD
			
	if (qglLockArraysEXT) {
		qglLockArraysEXT(0, tess.numVertexes);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}
	
	R_DrawElements( tess.numIndexes, tess.indexes );
		
	if (qglUnlockArraysEXT) {
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

	// FIX: Must reset these manually or renderer will b0rk!
	qglCullFace( GL_FRONT ); 
	qglLineWidth( 1 );
}

开发者ID:burzumishi，项目名称:dragonballworld，代码行数:51，代码来源:tr_shade.c

示例5: qglFogf

void CQuickSpriteSystem::Flush(void)
{
	if (mNextVert==0)
	{
		return;
	}

	/*
	if (mUseFog && r_drawfog->integer == 2 &&
		mFogIndex == tr.world->globalFog)
	{ //enable hardware fog when we draw this thing if applicable -rww
		fog_t *fog = tr.world->fogs + mFogIndex;

		qglFogf(GL_FOG_MODE, GL_EXP2);
		qglFogf(GL_FOG_DENSITY, logtestExp2 / fog->parms.depthForOpaque);
		qglFogfv(GL_FOG_COLOR, fog->parms.color);
		qglEnable(GL_FOG);
	}
	*/
	//this should not be needed, since I just wait to disable fog for the surface til after surface sprites are done

	//
	// render the main pass
	//
	R_BindAnimatedImage( mTexBundle );
	GL_State(mGLStateBits);

	//
	// set arrays and lock
	//
	qglTexCoordPointer( 2, GL_FLOAT, 0, mTextureCoords );
	qglEnableClientState( GL_TEXTURE_COORD_ARRAY);

	qglEnableClientState( GL_COLOR_ARRAY);
	qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, mColors );

	qglVertexPointer (3, GL_FLOAT, 16, mVerts);

	if ( qglLockArraysEXT )
	{
		qglLockArraysEXT(0, mNextVert);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	qglDrawArrays(GL_QUADS, 0, mNextVert);

	backEnd.pc.c_vertexes += mNextVert;
	backEnd.pc.c_indexes += mNextVert;
	backEnd.pc.c_totalIndexes += mNextVert;

	//only for software fog pass (global soft/volumetric) -rww
	if (mUseFog && (r_drawfog->integer != 2 || mFogIndex != tr.world->globalFog))
	{
		fog_t *fog = tr.world->fogs + mFogIndex;

		//
		// render the fog pass
		//
		GL_Bind( tr.fogImage );
		GL_State( GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA | GLS_DEPTHFUNC_EQUAL );

		//
		// set arrays and lock
		//
		qglTexCoordPointer( 2, GL_FLOAT, 0, mFogTextureCoords);
//		qglEnableClientState( GL_TEXTURE_COORD_ARRAY);	// Done above

		qglDisableClientState( GL_COLOR_ARRAY );
		qglColor4ubv((GLubyte *)&fog->colorInt);

//		qglVertexPointer (3, GL_FLOAT, 16, mVerts);	// Done above

		qglDrawArrays(GL_QUADS, 0, mNextVert);

		// Second pass from fog
		backEnd.pc.c_totalIndexes += mNextVert;
	}

	//
	// unlock arrays
	//
	if (qglUnlockArraysEXT)
	{
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

	mNextVert=0;
}

开发者ID:AlexXT，项目名称:OpenJK，代码行数:89，代码来源:tr_quicksprite.cpp

示例6: RB_StageIteratorLightmappedMultitexture

void RB_StageIteratorLightmappedMultitexture( void ) {
	shaderCommands_t *input;
	shader_t		*shader;

	input = &tess;
	shader = input->shader;

	//
	// log this call
	//
	if ( r_logFile->integer ) {
		// don't just call LogComment, or we will get
		// a call to va() every frame!
		GLimp_LogComment( va("--- RB_StageIteratorLightmappedMultitexture( %s ) ---\n", tess.shader->name) );
	}

	//
	// set face culling appropriately
	//
	GL_Cull( shader->cullType );

	//
	// set color, pointers, and lock
	//
	GL_State( GLS_DEFAULT );
	qglVertexPointer( 3, GL_FLOAT, 16, input->xyz );

#ifdef REPLACE_MODE
	qglDisableClientState( GL_COLOR_ARRAY );
	qglColor3f( 1, 1, 1 );
	qglShadeModel( GL_FLAT );
#else
	qglEnableClientState( GL_COLOR_ARRAY );
	qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, tess.constantColor255 );
#endif

	//
	// select base stage
	//
	GL_SelectTexture( 0 );

	qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
	R_BindAnimatedImage( &tess.xstages[0]->bundle[0] );
	qglTexCoordPointer( 2, GL_FLOAT, 16, tess.texCoords[0][0] );

	//
	// configure second stage
	//
	GL_SelectTexture( 1 );
	qglEnable( GL_TEXTURE_2D );
	if ( r_lightmap->integer ) {
		GL_TexEnv( GL_REPLACE );
	} else {
		GL_TexEnv( GL_MODULATE );
	}
	R_BindAnimatedImage( &tess.xstages[0]->bundle[1] );
	qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
	qglTexCoordPointer( 2, GL_FLOAT, 16, tess.texCoords[0][1] );

	//
	// lock arrays
	//
	if ( qglLockArraysEXT ) {
		qglLockArraysEXT(0, input->numVertexes);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	R_DrawElements( input->numIndexes, input->indexes );

	//
	// disable texturing on TEXTURE1, then select TEXTURE0
	//
	qglDisable( GL_TEXTURE_2D );
	qglDisableClientState( GL_TEXTURE_COORD_ARRAY );

	GL_SelectTexture( 0 );
#ifdef REPLACE_MODE
	GL_TexEnv( GL_MODULATE );
	qglShadeModel( GL_SMOOTH );
#endif

	// 
	// now do any dynamic lighting needed
	//
	if ( tess.dlightBits && tess.shader->sort <= SS_OPAQUE ) {
		ProjectDlightTexture();
	}

	//
	// now do fog
	//
	if ( tess.fogNum && tess.shader->fogPass ) {
		RB_FogPass();
	}

	//
	// unlock arrays
	//
	if ( qglUnlockArraysEXT ) {
		qglUnlockArraysEXT();
//.........这里部分代码省略.........

开发者ID:ptitSeb，项目名称:ioq3，代码行数:101，代码来源:tr_shade.c

示例7: RB_StageIteratorVertexLitTexture

/*
** RB_StageIteratorVertexLitTexture
*/
void RB_StageIteratorVertexLitTexture( void )
{
	shaderCommands_t *input;
	shader_t		*shader;

	input = &tess;
	shader = input->shader;

	//
	// compute colors
	//
	RB_CalcDiffuseColor( ( unsigned char * ) tess.svars.colors );

	//
	// log this call
	//
	if ( r_logFile->integer ) 
	{
		// don't just call LogComment, or we will get
		// a call to va() every frame!
		GLimp_LogComment( va("--- RB_StageIteratorVertexLitTexturedUnfogged( %s ) ---\n", tess.shader->name) );
	}

	//
	// set face culling appropriately
	//
	GL_Cull( shader->cullType );

	//
	// set arrays and lock
	//
	qglEnableClientState( GL_COLOR_ARRAY);
	qglEnableClientState( GL_TEXTURE_COORD_ARRAY);

	qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, tess.svars.colors );
	qglTexCoordPointer( 2, GL_FLOAT, 16, tess.texCoords[0][0] );
	qglVertexPointer (3, GL_FLOAT, 16, input->xyz);

	if ( qglLockArraysEXT )
	{
		qglLockArraysEXT(0, input->numVertexes);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	//
	// call special shade routine
	//
	R_BindAnimatedImage( &tess.xstages[0]->bundle[0] );
	GL_State( tess.xstages[0]->stateBits );
	R_DrawElements( input->numIndexes, input->indexes );

	// 
	// now do any dynamic lighting needed
	//
	if ( tess.dlightBits && tess.shader->sort <= SS_OPAQUE ) {
		ProjectDlightTexture();
	}

	//
	// now do fog
	//
	if ( tess.fogNum && tess.shader->fogPass ) {
		RB_FogPass();
	}

	// 
	// unlock arrays
	//
	if (qglUnlockArraysEXT) 
	{
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}
}

开发者ID:ptitSeb，项目名称:ioq3，代码行数:77，代码来源:tr_shade.c

示例8: RB_StageIteratorGeneric


//.........这里部分代码省略.........
	// log this call
	//
	if ( r_logFile->integer ) 
	{
		// don't just call LogComment, or we will get
		// a call to va() every frame!
		GLimp_LogComment( va("--- RB_StageIteratorGeneric( %s ) ---\n", tess.shader->name) );
	}

	//
	// set face culling appropriately
	//
	GL_Cull( shader->cullType );

	// set polygon offset if necessary
	if ( shader->polygonOffset )
	{
		qglEnable( GL_POLYGON_OFFSET_FILL );
		qglPolygonOffset( r_offsetFactor->value, r_offsetUnits->value );
	}

	//
	// if there is only a single pass then we can enable color
	// and texture arrays before we compile, otherwise we need
	// to avoid compiling those arrays since they will change
	// during multipass rendering
	//
	if ( tess.numPasses > 1 || shader->multitextureEnv )
	{
		setArraysOnce = qfalse;
		qglDisableClientState (GL_COLOR_ARRAY);
		qglDisableClientState (GL_TEXTURE_COORD_ARRAY);
	}
	else
	{
		setArraysOnce = qtrue;

		qglEnableClientState( GL_COLOR_ARRAY);
		qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, tess.svars.colors );

		qglEnableClientState( GL_TEXTURE_COORD_ARRAY);
		qglTexCoordPointer( 2, GL_FLOAT, 0, tess.svars.texcoords[0] );
	}

	//
	// lock XYZ
	//
	qglVertexPointer (3, GL_FLOAT, 16, input->xyz);	// padded for SIMD
	if (qglLockArraysEXT)
	{
		qglLockArraysEXT(0, input->numVertexes);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	//
	// enable color and texcoord arrays after the lock if necessary
	//
	if ( !setArraysOnce )
	{
		qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
		qglEnableClientState( GL_COLOR_ARRAY );
	}

	//
	// call shader function
	//
	RB_IterateStagesGeneric( input );

	// 
	// now do any dynamic lighting needed
	//
	if ( tess.dlightBits && tess.shader->sort <= SS_OPAQUE
		&& !(tess.shader->surfaceFlags & (SURF_NODLIGHT | SURF_SKY) ) ) {
		ProjectDlightTexture();
	}

	//
	// now do fog
	//
	if ( tess.fogNum && tess.shader->fogPass ) {
		RB_FogPass();
	}

	// 
	// unlock arrays
	//
	if (qglUnlockArraysEXT) 
	{
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

	//
	// reset polygon offset
	//
	if ( shader->polygonOffset )
	{
		qglDisable( GL_POLYGON_OFFSET_FILL );
	}
}

开发者ID:ptitSeb，项目名称:ioq3，代码行数:101，代码来源:tr_shade.c

示例9: DrawTris

/*
================
DrawTris

Draws triangle outlines for debugging
================
*/
static void DrawTris( shaderCommands_t *input ) {
	char            *s = r_trisColor->string;
	vec4_t trisColor = { 1, 1, 1, 1 };
	unsigned int stateBits = 0;

	GL_Bind( tr.whiteImage );

	if ( *s == '0' && ( *( s + 1 ) == 'x' || *( s + 1 ) == 'X' ) ) {
		s += 2;
		if ( Q_IsHexColorString( s ) ) {
			trisColor[0] = ( (float)( gethex( *( s ) ) * 16 + gethex( *( s + 1 ) ) ) ) / 255.00;
			trisColor[1] = ( (float)( gethex( *( s + 2 ) ) * 16 + gethex( *( s + 3 ) ) ) ) / 255.00;
			trisColor[2] = ( (float)( gethex( *( s + 4 ) ) * 16 + gethex( *( s + 5 ) ) ) ) / 255.00;

			if ( Q_HexColorStringHasAlpha( s ) ) {
				trisColor[3] = ( (float)( gethex( *( s + 6 ) ) * 16 + gethex( *( s + 7 ) ) ) ) / 255.00;
			}
		}
	} else {
		int i;
		char    *token;

		for ( i = 0 ; i < 4 ; i++ ) {
			token = COM_Parse( &s );
			if ( token ) {
				trisColor[i] = atof( token );
			} else {
				trisColor[i] = 1.f;
			}
		}

		if ( !trisColor[3] ) {
			trisColor[3] = 1.f;
		}
	}

	if ( trisColor[3] < 1.f ) {
		stateBits |= ( GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA );
	}

	qglColor4fv( trisColor );

	// ydnar r_showtris 2
	if ( r_showtris->integer == 2 ) {
		stateBits |= ( GLS_POLYMODE_LINE | GLS_DEPTHMASK_TRUE );
		GL_State( stateBits );
		qglDepthRange( 0, 0 );
	}
	#ifdef CELSHADING_HACK
	else if ( r_showtris->integer == 3 ) {
		stateBits |= ( GLS_POLYMODE_LINE | GLS_DEPTHMASK_TRUE );
		GL_State( stateBits );
		qglEnable( GL_POLYGON_OFFSET_LINE );
		qglPolygonOffset( 4.0, 0.5 );
		qglLineWidth( 5.0 );
	}
	#endif
	else
	{
		stateBits |= ( GLS_POLYMODE_LINE );
		GL_State( stateBits );
		qglEnable( GL_POLYGON_OFFSET_LINE );
		qglPolygonOffset( r_offsetFactor->value, r_offsetUnits->value );
	}

	qglDisableClientState( GL_COLOR_ARRAY );
	qglDisableClientState( GL_TEXTURE_COORD_ARRAY );

	qglVertexPointer( 3, GL_FLOAT, 16, input->xyz ); // padded for SIMD

	if ( qglLockArraysEXT ) {
		qglLockArraysEXT( 0, input->numVertexes );
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	R_DrawElements( input->numIndexes, input->indexes );

	if ( qglUnlockArraysEXT ) {
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}
	qglDepthRange( 0, 1 );
	qglDisable( GL_POLYGON_OFFSET_LINE );
}

开发者ID:AdrienJaguenet，项目名称:Enemy-Territory，代码行数:91，代码来源:tr_shade.c

示例10: RB_StageIteratorLightmappedMultitexture


//.........这里部分代码省略.........
	//
	// set face culling appropriately
	//
	GL_Cull( input->shader->cullType );

	//
	// set color, pointers, and lock
	//
	GL_State( GLS_DEFAULT );
	qglVertexPointer( 3, GL_FLOAT, 16, input->xyz );

#ifdef REPLACE_MODE
	qglDisableClientState( GL_COLOR_ARRAY );
	qglColor3f( 1, 1, 1 );
	qglShadeModel( GL_FLAT );
#else
	qglEnableClientState( GL_COLOR_ARRAY );
	qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, tess.constantColor255 );
#endif

	//
	// select base stage
	//
	GL_SelectTexture( 0 );

	qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
	R_BindAnimatedImage( &tess.xstages[0]->bundle[0] );
	qglTexCoordPointer( 2, GL_FLOAT, 8, tess.texCoords0 );

	//
	// configure second stage
	//
	GL_SelectTexture( 1 );
	qglEnable( GL_TEXTURE_2D );
	if ( r_lightmap->integer ) {
		GL_TexEnv( GL_REPLACE );
	} else {
		GL_TexEnv( GL_MODULATE );
	}

//----(SA)	modified for snooper
	if ( tess.xstages[0]->bundle[1].isLightmap && ( backEnd.refdef.rdflags & RDF_SNOOPERVIEW ) ) {
		GL_Bind( tr.whiteImage );
	} else {
		R_BindAnimatedImage( &tess.xstages[0]->bundle[1] );
	}

	qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
	qglTexCoordPointer( 2, GL_FLOAT, 8, tess.texCoords1 );

	//
	// lock arrays
	//
	if ( qglLockArraysEXT ) {
		qglLockArraysEXT( 0, input->numVertexes );
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	R_DrawElements( input->numIndexes, input->indexes );

	//
	// disable texturing on TEXTURE1, then select TEXTURE0
	//
	qglDisable( GL_TEXTURE_2D );
	qglDisableClientState( GL_TEXTURE_COORD_ARRAY );

	GL_SelectTexture( 0 );
#ifdef REPLACE_MODE
	GL_TexEnv( GL_MODULATE );
	qglShadeModel( GL_SMOOTH );
#endif

	//
	// now do any dynamic lighting needed
	//
	//%	if ( tess.dlightBits && tess.shader->sort <= SS_OPAQUE )
	if ( tess.dlightBits && tess.shader->fogPass &&
		 !( tess.shader->surfaceFlags & ( SURF_NODLIGHT | SURF_SKY ) ) ) {
		if ( r_dynamiclight->integer == 2 ) {
			DynamicLightPass();
		} else {
			DynamicLightSinglePass();
		}
	}

	//
	// now do fog
	//
	if ( tess.fogNum && tess.shader->fogPass ) {
		RB_FogPass();
	}

	//
	// unlock arrays
	//
	if ( qglUnlockArraysEXT ) {
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}
}

开发者ID:AdrienJaguenet，项目名称:Enemy-Territory，代码行数:101，代码来源:tr_shade.c

示例11: R_BindAnimatedImage

void CQuickSpriteSystem::Flush(void)
{
	if (mNextVert==0)
	{
		return;
	}

	//
	// render the main pass
	//
	R_BindAnimatedImage( mTexBundle );
	GL_State(mGLStateBits);

	//
	// set arrays and lock
	//
	qglTexCoordPointer( 2, GL_FLOAT, 0, mTextureCoords );
	qglEnableClientState( GL_TEXTURE_COORD_ARRAY);

	qglEnableClientState( GL_COLOR_ARRAY);
	qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, mColors );

	qglVertexPointer (3, GL_FLOAT, 16, mVerts);

	if ( qglLockArraysEXT )
	{
		qglLockArraysEXT(0, mNextVert);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	qglDrawArrays(GL_QUADS, 0, mNextVert);

	backEnd.pc.c_vertexes += mNextVert;
	backEnd.pc.c_indexes += mNextVert;
	backEnd.pc.c_totalIndexes += mNextVert;

	if (mUseFog)
	{
		//
		// render the fog pass
		//
		GL_Bind( tr.fogImage );
		GL_State( GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA | GLS_DEPTHFUNC_EQUAL );

		//
		// set arrays and lock
		//
		qglTexCoordPointer( 2, GL_FLOAT, 0, mFogTextureCoords);
//		qglEnableClientState( GL_TEXTURE_COORD_ARRAY);	// Done above

		qglDisableClientState( GL_COLOR_ARRAY );
		qglColor4ubv((GLubyte *)&mFogColor);

//		qglVertexPointer (3, GL_FLOAT, 16, mVerts);	// Done above

		qglDrawArrays(GL_QUADS, 0, mNextVert);

		// Second pass from fog
		backEnd.pc.c_totalIndexes += mNextVert;
	}

	// 
	// unlock arrays
	//
	if (qglUnlockArraysEXT) 
	{
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

	mNextVert=0;
}

开发者ID:LTolosa，项目名称:Jedi-Outcast，代码行数:72，代码来源:tr_quicksprite.cpp

示例12: GL_DrawAliasFrameLerp


//.........这里部分代码省略.........
				count = -count;
				qglBegin (GL_TRIANGLE_FAN);
			}
			else
			{
				qglBegin (GL_TRIANGLE_STRIP);
			}

			// PMM - added double damage shell
			if ( currententity->flags & ( RF_SHELL_RED | RF_SHELL_GREEN | RF_SHELL_BLUE | RF_SHELL_DOUBLE | RF_SHELL_HALF_DAM) )
			{
				do
				{
					index_xyz = order[2];
					order += 3;

					qglVertex3fv( s_lerped[index_xyz] );

				} while (--count);
			}
			else
			{
				do
				{
					// texture coordinates come from the draw list
					qglTexCoord2f (((float *)order)[0], ((float *)order)[1]);
					index_xyz = order[2];

					order += 3;

					// normals and vertexes come from the frame list
//					l = shadedots[verts[index_xyz].lightnormalindex];
					
//					qglColor4f (l* shadelight[0], l*shadelight[1], l*shadelight[2], alpha);
					qglArrayElement( index_xyz );

				} while (--count);
			}
			qglEnd ();
		}

		if ( qglUnlockArraysEXT != 0 )
			qglUnlockArraysEXT();
	}
	else
	{
		while (1)
		{
			// get the vertex count and primitive type
			count = *order++;
			if (!count)
				break;		// done
			if (count < 0)
			{
				count = -count;
				qglBegin (GL_TRIANGLE_FAN);
			}
			else
			{
				qglBegin (GL_TRIANGLE_STRIP);
			}

			if ( currententity->flags & ( RF_SHELL_RED | RF_SHELL_GREEN | RF_SHELL_BLUE ) )
			{
				do
				{
					index_xyz = order[2];
					order += 3;

					qglColor4f( shadelight[0], shadelight[1], shadelight[2], alpha);
					qglVertex3fv (s_lerped[index_xyz]);

				} while (--count);
			}
			else
			{
				do
				{
					// texture coordinates come from the draw list
					qglTexCoord2f (((float *)order)[0], ((float *)order)[1]);
					index_xyz = order[2];
					order += 3;

					// normals and vertexes come from the frame list
					l = shadedots[verts[index_xyz].lightnormalindex];
					
					qglColor4f (l* shadelight[0], l*shadelight[1], l*shadelight[2], alpha);
					qglVertex3fv (s_lerped[index_xyz]);
				} while (--count);
			}

			qglEnd ();
		}
	}

//	if ( currententity->flags & ( RF_SHELL_RED | RF_SHELL_GREEN | RF_SHELL_BLUE ) )
	// PMM - added double damage shell
	if ( currententity->flags & ( RF_SHELL_RED | RF_SHELL_GREEN | RF_SHELL_BLUE | RF_SHELL_DOUBLE | RF_SHELL_HALF_DAM) )
		qglEnable( GL_TEXTURE_2D );
}

开发者ID:AkBKukU，项目名称:Quake-2，代码行数:101，代码来源:gl_mesh.c

示例13: RB_GLSL_StageIteratorGeneric

/*
 * RB_GLSL_StageIteratorGeneric
 * Stage iterator for GLSL programs
 */
void RB_GLSL_StageIteratorGeneric(void) {
	shaderCommands_t	*input;

	input = &tess;

	/* log this call */
	if (r_logFile->integer) {
		/* don't just call LogComment, or we will get a call to va() every frame! */
		GLimp_LogComment(va("--- R_GLSL_StageIteratorGeneric( %s ) ---\n", input->shader->name));
	}

	/* set face culling appropiately */
	GL_Cull(input->shader->cullType);

	/* set polygon offset if necessary */
	if (input->shader->polygonOffset) {
		qglEnable(GL_POLYGON_OFFSET_FILL);
		qglPolygonOffset(r_offsetFactor->value, r_offsetUnits->value);
	}

	/* set vertex color array */
	qglEnableClientState(GL_COLOR_ARRAY);
	qglColorPointer(4, GL_UNSIGNED_BYTE, 0, input->vertexColors);

	/* set texture coordinate array 0 */
	GL_SelectTexture(0);
	qglEnableClientState(GL_TEXTURE_COORD_ARRAY);
	qglTexCoordPointer(2, GL_FLOAT, 16, input->texCoords[0][0]);

	/* set texture coordinate array 1 */
	GL_SelectTexture(1);
	qglEnableClientState(GL_TEXTURE_COORD_ARRAY);
	qglTexCoordPointer(2, GL_FLOAT, 16, input->texCoords[0][1]);

	/* set vertex normal array */
	qglEnableClientState(GL_NORMAL_ARRAY);
	qglNormalPointer(GL_FLOAT, 16, input->normal);

	/* lock XYZ */
	qglVertexPointer(3, GL_FLOAT, 16, input->xyz); /* padded SIMD */
	if (qglLockArraysEXT) {
		qglLockArraysEXT(0, input->numVertexes);
		GLimp_LogComment("glLockArraysEXT\n");
	}

	RB_GLSL_IterateStagesGeneric(input);

	/* now do any dynamic lighting needed */
	if (input->dlightBits && input->shader->sort <= SS_OPAQUE && !(input->shader->surfaceFlags & (SURF_NODLIGHT | SURF_SKY)))
		ProjectDlightTexture();

	// <-- RiO_Outlines: now do outlines
	RB_OutlinesPass();
	// -->

	/* now do fog */
	if (input->fogNum && input->shader->fogPass)
		RB_FogPass(); // TODO: uses svars which aren't set, so move to program

	/* unlock arrays */
	if (qglUnlockArraysEXT) {
		qglUnlockArraysEXT();
		GLimp_LogComment("glUnlockArraysExt\n");
	}

	/* reset polygon offset */
	if (input->shader->polygonOffset)
		qglDisable(GL_POLYGON_OFFSET_FILL);
}

开发者ID:burzumishi，项目名称:dragonballworld，代码行数:73，代码来源:tr_shade.c

示例14: R_DrawAliasFrameLerp


//.........这里部分代码省略.........
				do
				{
#if defined(VERTEX_ARRAYS)
                    tex[index_tex++] = ( (float *) order ) [ 0 ];
                    tex[index_tex++] = ( (float *) order ) [ 1 ];
					index_xyz = order [ 2 ];

					order += 3;
#else
					/* texture coordinates come from the draw list */
					qglTexCoord2f( ( (float *) order ) [ 0 ], ( (float *) order ) [ 1 ] );
					index_xyz = order [ 2 ];

					order += 3;

					qglArrayElement( index_xyz );
#endif
				}
				while ( --count );
			}

#if defined(VERTEX_ARRAYS)
            qglEnableClientState( GL_VERTEX_ARRAY );

            qglVertexPointer( 3, GL_FLOAT, 0, vtx );
            qglDrawArrays( type, 0, total );

            qglDisableClientState( GL_VERTEX_ARRAY );
#else
			qglEnd();
#endif
		}
#if !defined(VERTEX_ARRAYS)
		if ( qglUnlockArraysEXT != 0 )
		{
			qglUnlockArraysEXT();
		}
#endif
	}
	else
	{
		while ( 1 )
		{
			/* get the vertex count and primitive type */
			count = *order++;

			if ( !count )
			{
				break; /* done */
			}

			if ( count < 0 )
			{
				count = -count;
#if defined(VERTEX_ARRAYS)
                type = GL_TRIANGLE_FAN;
#else
				qglBegin( GL_TRIANGLE_FAN );
#endif
			}
			else
			{
#if defined(VERTEX_ARRAYS)
                type = GL_TRIANGLE_STRIP;
#else
				qglBegin( GL_TRIANGLE_STRIP );

开发者ID:Nekrofage，项目名称:Quake2RPi，代码行数:67，代码来源:r_mesh.c

示例15: ProjectDlightTexture2


//.........这里部分代码省略.........
			fogging = qglIsEnabled(GL_FOG);

			if (fogging)
			{
				qglDisable(GL_FOG);
			}
		}
		else
		{
			fogging = 0;
		}


		dStage = NULL;
		if (tess.shader && qglActiveTextureARB)
		{
			int i = 0;
			while (i < tess.shader->numUnfoggedPasses)
			{
				const int blendBits = (GLS_SRCBLEND_BITS+GLS_DSTBLEND_BITS);
				if (((tess.shader->stages[i].bundle[0].image && !tess.shader->stages[i].bundle[0].isLightmap && !tess.shader->stages[i].bundle[0].numTexMods && tess.shader->stages[i].bundle[0].tcGen != TCGEN_ENVIRONMENT_MAPPED && tess.shader->stages[i].bundle[0].tcGen != TCGEN_FOG) ||
					 (tess.shader->stages[i].bundle[1].image && !tess.shader->stages[i].bundle[1].isLightmap && !tess.shader->stages[i].bundle[1].numTexMods && tess.shader->stages[i].bundle[1].tcGen != TCGEN_ENVIRONMENT_MAPPED && tess.shader->stages[i].bundle[1].tcGen != TCGEN_FOG)) &&
					(tess.shader->stages[i].stateBits & blendBits) == 0 )
				{ //only use non-lightmap opaque stages
                    dStage = &tess.shader->stages[i];
					break;
				}
				i++;
			}
		}
		if (!needResetVerts)
		{
			needResetVerts=1;
			if (qglUnlockArraysEXT)
			{
				qglUnlockArraysEXT();
				GLimp_LogComment( "glUnlockArraysEXT\n" );
			}
		}
		qglVertexPointer (3, GL_FLOAT, 16, vertCoordsArray);	// padded for SIMD

		if (dStage)
		{
			GL_SelectTexture( 0 );
			GL_State(0);
			qglTexCoordPointer( 2, GL_FLOAT, 0, oldTexCoordsArray[0] );
			if (dStage->bundle[0].image && !dStage->bundle[0].isLightmap && !dStage->bundle[0].numTexMods && dStage->bundle[0].tcGen != TCGEN_ENVIRONMENT_MAPPED && dStage->bundle[0].tcGen != TCGEN_FOG)
			{
				R_BindAnimatedImage( &dStage->bundle[0] );
			}
			else
			{
				R_BindAnimatedImage( &dStage->bundle[1] );
			}

			GL_SelectTexture( 1 );
			qglEnable( GL_TEXTURE_2D );
			qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
			qglTexCoordPointer( 2, GL_FLOAT, 0, texCoordsArray[0] );
			qglEnableClientState( GL_COLOR_ARRAY );
			qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, colorArray );
			GL_Bind( tr.dlightImage );
			GL_TexEnv( GL_MODULATE );


			GL_State(GLS_SRCBLEND_ONE | GLS_DSTBLEND_ONE | GLS_DEPTHFUNC_EQUAL);// | GLS_ATEST_GT_0);

开发者ID:AlexXT，项目名称:OpenJK，代码行数:67，代码来源:tr_shade.cpp

示例16: R_DrawSkyBox

void R_DrawSkyBox (void)
{
	int		i;
	float skyM[16];
	vec_t	*v, *st;

	if (skyrotate)
	{	// check for no sky at all
		for (i = 0; i < 6; i++) {
			if (skymins[0][i] < skymaxs[0][i] && skymins[1][i] < skymaxs[1][i])
				break;
		}
		if (i == 6)
			return;		// nothing visible

		R_RotateMatrix(skyM, r_WorldViewMatrix, r_newrefdef.time * skyrotate, skyaxis[0], skyaxis[1], skyaxis[2]);
	} else {
		skyM[0]  = r_WorldViewMatrix[0];
		skyM[1]  = r_WorldViewMatrix[1];
		skyM[2]  = r_WorldViewMatrix[2];
		skyM[4]  = r_WorldViewMatrix[4];
		skyM[5]  = r_WorldViewMatrix[5];
		skyM[6]  = r_WorldViewMatrix[6];
		skyM[8]  = r_WorldViewMatrix[8];
		skyM[9]  = r_WorldViewMatrix[9];
		skyM[10] = r_WorldViewMatrix[10];
		skyM[3] = skyM[7] = skyM[11] = skyM[12] = skyM[13] = skyM[14] = 0.0f;
		skyM[15] = 1.0f;
	}

	qglLoadMatrixf( skyM );

	qglTexCoordPointer( 2, GL_FLOAT, 0, r_arrays.tcoords );
	for (i = 0; i < 6; i++)
	{
		if (skyrotate)
		{	// hack, forces full sky to draw when rotating
			skymins[0][i] =	skymins[1][i] = -1;
			skymaxs[0][i] =	skymaxs[1][i] = 1;
		}
		else if (skymins[0][i] >= skymaxs[0][i] || skymins[1][i] >= skymaxs[1][i])
			continue;

		GL_Bind (sky_images[skytexorder[i]]->texnum);

		st = r_arrays.tcoords[0];
		v = r_arrays.vertices;
		MakeSkyVec (skymins[0][i], skymins[1][i], i, v, st);
		MakeSkyVec (skymins[0][i], skymaxs[1][i], i, v+=3, st+=2);
		MakeSkyVec (skymaxs[0][i], skymaxs[1][i], i, v+=3, st+=2);
		MakeSkyVec (skymaxs[0][i], skymins[1][i], i, v+=3, st+=2);
		if(gl_state.compiledVertexArray) {
			qglLockArraysEXT( 0, 4 );
			qglDrawElements( GL_TRIANGLES, 6, GL_UNSIGNED_INT, r_arrays.indices );
			qglUnlockArraysEXT ();
		} else {
			qglDrawElements( GL_TRIANGLES, 6, GL_UNSIGNED_INT, r_arrays.indices );
		}
	}

	qglLoadMatrixf(r_WorldViewMatrix);
}

开发者ID:chrisnew，项目名称:quake2，代码行数:62，代码来源:gl_warp.c

示例17: RB_StageIteratorGeneric


//.........这里部分代码省略.........
	//
	GL_Cull( input->shader->cullType );

	// set polygon offset if necessary
	if ( input->shader->polygonOffset ) {
		qglEnable( GL_POLYGON_OFFSET_FILL );
		qglPolygonOffset( r_offsetFactor->value, r_offsetUnits->value );
	}

	//
	// if there is only a single pass then we can enable color
	// and texture arrays before we compile, otherwise we need
	// to avoid compiling those arrays since they will change
	// during multipass rendering
	//
	if ( tess.numPasses > 1 || input->shader->multitextureEnv ) {
		setArraysOnce = qfalse;
		qglDisableClientState( GL_COLOR_ARRAY );
		qglDisableClientState( GL_TEXTURE_COORD_ARRAY );
	} else
	{
		setArraysOnce = qtrue;

		qglEnableClientState( GL_COLOR_ARRAY );
		qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, tess.svars.colors );

		qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
		qglTexCoordPointer( 2, GL_FLOAT, 0, tess.svars.texcoords[0] );
	}

	// RF, send normals only if required
	// This must be done first, since we can't change the arrays once they have been
	// locked
	if ( qglPNTrianglesiATI && tess.ATI_tess ) {
		qglNormalPointer( GL_FLOAT, 16, input->normal );
	}

	//
	// lock XYZ
	//
	qglVertexPointer( 3, GL_FLOAT, 16, input->xyz ); // padded for SIMD
	if ( qglLockArraysEXT ) {
		qglLockArraysEXT( 0, input->numVertexes );
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	//
	// enable color and texcoord arrays after the lock if necessary
	//
	if ( !setArraysOnce ) {
		qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
		qglEnableClientState( GL_COLOR_ARRAY );
	}

	//
	// call shader function
	//
	RB_IterateStagesGeneric( input );

	//
	// now do any dynamic lighting needed
	//
	if ( tess.dlightBits && tess.shader->sort <= SS_OPAQUE
		 && !( tess.shader->surfaceFlags & ( SURF_NODLIGHT | SURF_SKY ) ) ) {
		ProjectDlightTexture();
	}

	//
	// now do fog
	//
	if ( tess.fogNum && tess.shader->fogPass ) {
		RB_FogPass();
	}

	//
	// unlock arrays
	//
	if ( qglUnlockArraysEXT ) {
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

	//
	// reset polygon offset
	//
	if ( input->shader->polygonOffset ) {
		qglDisable( GL_POLYGON_OFFSET_FILL );
	}

	// turn truform back off
	if ( qglPNTrianglesiATI && tess.ATI_tess ) {
#ifdef __MACOS__    //DAJ ATI
		qglPNTrianglesiATI( GL_PN_TRIANGLES_ATI, 0 );
#else
		qglDisable( GL_PN_TRIANGLES_ATI );    // ATI PN-Triangles extension
#endif
		qglDisableClientState( GL_NORMAL_ARRAY );
	}

}

开发者ID:LBoksha，项目名称:RTCW-SP-linux，代码行数:101，代码来源:tr_shade.c

注：本文中的qglUnlockArraysEXT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ qglVertex2f函数代码示例发布时间：2022-05-30

C++ qglTexCoordPointer函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17987|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9573|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8130|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8513|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8417|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9313|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8380|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7813|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8366|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7363|2022-11-06

客服电话

电子邮件

C++ qglUnlockArraysEXT函数代码示例

示例1: DrawCel

示例2: DrawTris

示例3: qglMatrixMode

示例4: RB_OutlinesPass

示例5: qglFogf

示例6: RB_StageIteratorLightmappedMultitexture

示例7: RB_StageIteratorVertexLitTexture

示例8: RB_StageIteratorGeneric

示例9: DrawTris

示例10: RB_StageIteratorLightmappedMultitexture

示例11: R_BindAnimatedImage

示例12: GL_DrawAliasFrameLerp

示例13: RB_GLSL_StageIteratorGeneric

示例14: R_DrawAliasFrameLerp

示例15: ProjectDlightTexture2

示例16: R_DrawSkyBox

示例17: RB_StageIteratorGeneric

请发表评论

全部评论

上一篇：

下一篇：

kojino/Harvard-Robust-Machine-Learning:

数据预测之BP神经网络具体应用以及matlab代

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

CVE-2015-0256

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053