本文整理汇总了C++中r0函数的典型用法代码示例。如果您正苦于以下问题：C++ r0函数的具体用法？C++ r0怎么用？C++ r0使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了r0函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: aten_read_block
static void aten_read_block( PIA *pi, char * buf, int count )
{ int k, a, b, c, d;
switch (pi->mode) {
case 0: w0(0x48); w2(0xe); w2(6);
for (k=0;k<count/2;k++) {
w2(7); w2(6); w2(2);
a = r1(); w0(0x58); b = r1();
w2(0); d = r1(); w0(0x48); c = r1();
buf[2*k] = j44(c,d);
buf[2*k+1] = j44(a,b);
}
w2(0xc);
break;
case 1: w0(0x58); w2(0xe); w2(6);
for (k=0;k<count/2;k++) {
w2(0x27); w2(0x26); w2(0x22);
a = r0(); w2(0x20); b = r0();
buf[2*k] = b; buf[2*k+1] = a;
}
w2(0x26); w2(0xc);
break;
}
}
开发者ID:dmgerman，项目名称:linux-pre-history，代码行数:27，代码来源:aten.c
示例2: kx_r_execute_with_params
SEXP kx_r_execute_with_params(SEXP connection, SEXP query, SEXP param)
{
K result;
SEXP s;
kx_connection = INTEGER_VALUE(connection);
int i, n = length(param);
K vector = ktn(KF,n);
for (i = 0; i < n; i++) {
kF(vector)[i] = REAL(param)[i];
}
result = k(kx_connection, (char*) CHARACTER_VALUE(query), vector, (K)0);
if (0 == result) {
error("Error: not connected to kdb+ server\n");
}
else if (-128 == result->t) {
char *e = calloc(strlen(result->s) + 1, 1);
strcpy(e, result->s);
r0(result);
error("Error from kdb+: `%s\n", e);
}
s = from_any_kobject(result);
r0(result);
return s;
}
开发者ID:jokbull，项目名称:qserver，代码行数:26，代码来源:qserver.c
示例3: testSerial
KDB_API K K_DECL testSerial(K a) {
K k = kpn("000001.SZ", 9);
//K s = b9(-1, k);
K s = b9(1, k);
for (G* i = kG(s); i < kG(s) + s->n; ++i) {
std::cout << std::setiosflags(std::ios::uppercase) << std::setfill('0') << std::setw(2)
<< std::hex << static_cast<int>(*i) << ',';
}
std::cout << std::endl;
# if KX_HAS_OKX
std::cout << "okx = " << okx(s) << std::endl;
# endif
if (a->g) {
r0(s);
return k;
}
else {
r0(k);
return s;
}
}
开发者ID:Rolandklyuan，项目名称:q_Wind，代码行数:25，代码来源:test.cpp
示例4: recieve_data
K recieve_data(I x)
{
static char buf[BUFFER_SIZE];
read_bytes(sizeof(int), &buf);
int tnamesize = 0;
memcpy(&tnamesize, buf, sizeof(int));
read_bytes(tnamesize, &buf);
buf[tnamesize] = '\0';
K tname = ks(buf);
read_bytes(sizeof(J), &buf);
J size = 0;
memcpy(&size, buf, sizeof(J));
read_bytes(size, &buf);
K bytes = ktn(KG, size);
memcpy(kG(bytes), &buf, (size_t) size);
K result = k(0, ".u.upd", tname, d9(bytes), (K) 0);
r0(bytes);
if (result != 0) {
r0(result);
}
return (K) 0;
}
开发者ID:AquaQAnalytics，项目名称:kdb-feedhandler-tutorial，代码行数:30，代码来源:main.c
示例5: BprojCore_dag
void Dirac_DomainWall_4D::
BprojCore_dag(double* f1,double* fN,const double* f) const{
// f1 = f5(0), fN = f5(N5_-1)
for(int c=0; c<NC_; ++c){
double fup_r = 0.5*(f[r0(c)] +f[r2(c)]);
double fup_i = 0.5*(f[i0(c)] +f[i2(c)]);
double fdn_r = 0.5*(f[r1(c)] +f[r3(c)]);
double fdn_i = 0.5*(f[i1(c)] +f[i3(c)]);
fN[r0(c)] = fup_r; fN[i0(c)] = fup_i;
fN[r1(c)] = fdn_r; fN[i1(c)] = fdn_i;
fN[r2(c)] = fup_r; fN[i2(c)] = fup_i;
fN[r3(c)] = fdn_r; fN[i3(c)] = fdn_i;
fup_r -= f[r2(c)]; //0.5*(f[r0(c)] -f[r2(c)])
fup_i -= f[i2(c)]; //0.5*(f[i0(c)] -f[i2(c)])
fdn_r -= f[r3(c)]; //0.5*(f[r1(c)] -f[r3(c)])
fdn_i -= f[i3(c)]; //0.5*(f[i1(c)] -f[i3(c)])
f1[r0(c)] = fup_r; f1[i0(c)] = fup_i;
f1[r1(c)] = fdn_r; f1[i1(c)] = fdn_i;
f1[r2(c)] =-fup_r; f1[i2(c)] =-fup_i;
f1[r3(c)] =-fdn_r; f1[i3(c)] =-fdn_i;
}
}
开发者ID:coppolachan，项目名称:IroIro，代码行数:26，代码来源:dirac_WilsonLike.cpp
示例6: main
int main(int argc,char*argv[])
{
K flip,result,columnNames,columnData;
int row,col,nCols,nRows;
int handle=khpu("localhost",1234,"user:password");
if(handle<0) exit(1);
result = k(handle,"`asc",(K)0);
std::string str = "([]a:til 10;b:reverse til 10;c:10#01010101010b;d:`a)";
result = k(handle,str.c_str(),(K)0);
if(!result) printf("Network Error\n"),perror("Network"),exit(1);
if(result->t==-128) printf("Server Error %s\n",result->s),kclose(handle),exit(1);
// kclose(handle);
if(result->t!=99&&result->t!=98)
{
printf("type %d\n",result->t);
r0(result);
exit(1);
}
flip = ktd(result); // if keyed table, unkey it. ktd decrements ref count of arg.
// table (flip) is column names!list of columns (data)
columnNames = kK(flip->k)[0];
columnData = kK(flip->k)[1];
nCols = columnNames->n;
nRows = kK(columnData)[0]->n;
for(row=0;row<nRows;row++)
{
if(0==row)
{
for(col=0;col<nCols;col++)
{
if(col>0)printf(",");
printf("%s",kS(columnNames)[col]);
}
printf("\n");
}
for(col=0;col<nCols;col++)
{
K obj=kK(columnData)[col];
if(col>0)printf(",");
switch(obj->t)
{
case(1):{printf("%d",kG(obj)[row]);}break;
case(4):{printf("%d",kG(obj)[row]);}break;
case(5):{printf("%d",kH(obj)[row]);}break;
case(6):{printf("%d",kI(obj)[row]);}break;
case(7):{printf("%lld",kJ(obj)[row]);}break;
case(8):{printf("%f",kE(obj)[row]);}break;
case(9):{printf("%f",kF(obj)[row]);}break;
case(11):{printf("%s",kS(obj)[row]);}break;
default:{printf("unknown type");}break;
}
}
printf("\n");
}
r0(flip);
return 0;
}
开发者ID:kevinarpe，项目名称:kx，代码行数:59，代码来源:dontcare.cpp
示例7:
void DiracWilsonLike::gamma5core(double* w,const double* f)const{
for(int c=0; c<N; ++c){
w[r0(c)] = f[r2(c)]; w[i0(c)] = f[i2(c)];
w[r1(c)] = f[r3(c)]; w[i1(c)] = f[i3(c)];
w[r2(c)] = f[r0(c)]; w[i2(c)] = f[i0(c)];
w[r3(c)] = f[r1(c)]; w[i3(c)] = f[i1(c)];
}
}
开发者ID:coppolachan，项目名称:IroIro，代码行数:8，代码来源:dirac_WilsonLike.cpp
示例8:
void GammaMatrix::isigma24core(double* w,const double* f)const{
for(int c=0; c<Ncol_; ++c){
w[r0(c)] = f[r3(c)]; w[i0(c)] = f[i3(c)];
w[r1(c)] =-f[r2(c)]; w[i1(c)] =-f[i2(c)];
w[r2(c)] = f[r1(c)]; w[i2(c)] = f[i1(c)];
w[r3(c)] =-f[r0(c)]; w[i3(c)] =-f[i0(c)];
}
}
开发者ID:coppolachan，项目名称:IroIro，代码行数:8，代码来源:wilsonLikeUtils.cpp
示例9: kbic_read_block
static void kbic_read_block( PIA *pi, char * buf, int count )
{ int k, a, b;
switch (pi->mode) {
case 0: w0(0x98); w2(4); w2(6); w2(4);
for (k=0;k<count/2;k++) {
w2(1); w0(8); a = r1();
w0(0x28); b = r1();
buf[2*k] = j44(a,b);
w2(5); b = r1();
w0(8); a = r1();
buf[2*k+1] = j44(a,b);
w2(4);
}
break;
case 1: w0(0xb8); w2(4); w2(6); w2(4);
for (k=0;k<count/4;k++) {
w0(0xb8);
w2(4); w2(5);
w0(8); buf[4*k] = j53(r12w());
w0(0xb8); buf[4*k+1] = j53(r12w());
w2(4); w2(5);
buf[4*k+3] = j53(r12w());
w0(8); buf[4*k+2] = j53(r12w());
}
w2(4);
break;
case 2: w0(0x88); w2(4); w2(6); w2(4);
for (k=0;k<count/2;k++) {
w2(0xa0); w2(0xa1); buf[2*k] = r0();
w2(0xa5); buf[2*k+1] = r0();
}
w2(4);
break;
case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
for (k=0;k<count;k++) buf[k] = r4();
w2(4); w2(0); w2(4);
break;
case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
w2(4); w2(0); w2(4);
break;
case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
w2(4); w2(0); w2(4);
break;
}
}
开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:57，代码来源:kbic.c
示例10: projMcore
void GammaMatrix::projMcore(double* w,const double* f)const{
for(int c=0; c<Ncol_; ++c){
double fup_r = 0.5*(f[r0(c)] -f[r2(c)]);
double fup_i = 0.5*(f[i0(c)] -f[i2(c)]);
double fdn_r = 0.5*(f[r1(c)] -f[r3(c)]);
double fdn_i = 0.5*(f[i1(c)] -f[i3(c)]);
w[r0(c)] = fup_r; w[i0(c)] = fup_i;
w[r1(c)] = fdn_r; w[i1(c)] = fdn_i;
w[r2(c)] =-fup_r; w[i2(c)] =-fup_i;
w[r3(c)] =-fdn_r; w[i3(c)] =-fdn_i;
}
}
开发者ID:coppolachan，项目名称:IroIro，代码行数:12，代码来源:wilsonLikeUtils.cpp
示例11: projMcore
void DiracWilsonLike::projMcore(double* w,const double* f)const{
for(int c=0; c<N; ++c){
double fup_r = 0.5*(f[r0(c)] -f[r2(c)]);
double fup_i = 0.5*(f[i0(c)] -f[i2(c)]);
double fdn_r = 0.5*(f[r1(c)] -f[r3(c)]);
double fdn_i = 0.5*(f[i1(c)] -f[i3(c)]);
w[r0(c)] = fup_r; w[i0(c)] = fup_i;
w[r1(c)] = fdn_r; w[i1(c)] = fdn_i;
w[r2(c)] =-fup_r; w[i2(c)] =-fup_i;
w[r3(c)] =-fdn_r; w[i3(c)] =-fdn_i;
}
}
开发者ID:coppolachan，项目名称:IroIro，代码行数:12，代码来源:dirac_WilsonLike.cpp
示例12: epat_read_regr
static int epat_read_regr( PIA *pi, int cont, int regr )
{ int a, b, r;
r = regr + cont_map[cont];
switch (pi->mode) {
case 0: w0(r); w2(1); w2(3);
a = r1(); w2(4); b = r1();
return j44(a,b);
case 1: w0(0x40+r); w2(1); w2(4);
a = r1(); b = r2(); w0(0xff);
return j53(a,b);
case 2: w0(0x20+r); w2(1); w2(0x25);
a = r0(); w2(4);
return a;
case 3:
case 4:
case 5: w3(r); w2(0x24); a = r4(); w2(4);
return a;
}
return -1; /* never gets here */
}
开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:28，代码来源:epat.c
示例13: epat_connect
static void epat_connect ( PIA *pi )
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
/* Initialize the chip */
CPP(0);
if (epatc8) {
CPP(0x40);CPP(0xe0);
w0(0);w2(1);w2(4);
WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
WR(0xe,0xf);WR(0xf,4);
/* WR(0xe,0xa);WR(0xf,4); */
WR(0xe,0xd);WR(0xf,0);
/* CPP(0x30); */
}
/* Connect to the chip */
CPP(0xe0);
w0(0);w2(1);w2(4); /* Idle into SPP */
if (pi->mode >= 3) {
w0(0);w2(1);w2(4);w2(0xc);
/* Request EPP */
w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
}
if (!epatc8) {
WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
}
}
开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:31，代码来源:epat.c
示例14: epat_connect
static void epat_connect ( PIA *pi )
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
#ifdef CONFIG_PARIDE_EPATC8
/* Initialize the chip */
CPP(0);CPP(0x40);CPP(0xe0);
w0(0);w2(1);w2(4);
WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
WR(0xe,0xf);WR(0xf,4);
/* WR(0xe,0xa);WR(0xf,4); */
WR(0xe,0xd);WR(0xf,0);
/* CPP(0x30); */
/* Connect to the chip */
CPP(0xe0);
w0(0);w2(1);w2(4); /* Idle into SPP */
if (pi->mode >= 3) {
w0(0);w2(1);w2(4);w2(0xc);
/* Request EPP */
w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
}
#else
CPP(0); CPP(0xe0);
w0(0); w2(1); w2(4);
if (pi->mode >= 3) {
w0(0); w2(1); w2(4); w2(0xc);
w0(0x40); w2(6); w2(7); w2(4); w2(0xc); w2(4);
}
WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
#endif
}
开发者ID:GunioRobot，项目名称:MI424WR_GEN2_Rev_E-F，代码行数:33，代码来源:epat.c
示例15: comm_read_regr
static int comm_read_regr( PIA *pi, int cont, int regr )
{ int l, h, r;
r = regr + cont_map[cont];
switch (pi->mode) {
case 0: w0(r); P1; w0(0);
w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
return j44(l,h);
case 1: w0(r+0x20); P1;
w0(0); w2(0x26); h = r0(); w2(4);
return h;
case 2:
case 3:
case 4: w3(r+0x20); (void)r1();
w2(0x24); h = r4(); w2(4);
return h;
}
return -1;
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:25，代码来源:comm.c
示例16: kbic_read_regr
static int kbic_read_regr( PIA *pi, int cont, int regr )
{ int a, b, s;
s = cont_map[cont];
switch (pi->mode) {
case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
a = r1(); w0(0x28); b = r1(); w2(4);
return j44(a,b);
case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
a = r12w(); w2(4);
return j53(a);
case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
a = r0(); w2(4);
return a;
case 3:
case 4:
case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
a = r4(); b = r4(); w2(4); w2(0); w2(4);
return a;
}
return -1;
}
开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:29，代码来源:kbic.c
示例17: r0
/*
* Make the matrix orthonormal in place using an iterative method.
* It is potentially slower if the matrix is far from orthonormal (i.e. if
* the row basis vectors are close to colinear) but in the common case
* of near-orthonormality it should be just as fast.
*
* The translation part is left intact. If the translation is represented as
* a homogenous coordinate (i.e. a non-unity lower right corner), it is divided
* out.
*/
bool
GfMatrix4f::Orthonormalize(bool issueWarning)
{
// orthogonalize and normalize row vectors
GfVec3d r0(_mtx[0][0],_mtx[0][1],_mtx[0][2]);
GfVec3d r1(_mtx[1][0],_mtx[1][1],_mtx[1][2]);
GfVec3d r2(_mtx[2][0],_mtx[2][1],_mtx[2][2]);
bool result = GfVec3d::OrthogonalizeBasis(&r0, &r1, &r2, true);
_mtx[0][0] = r0[0];
_mtx[0][1] = r0[1];
_mtx[0][2] = r0[2];
_mtx[1][0] = r1[0];
_mtx[1][1] = r1[1];
_mtx[1][2] = r1[2];
_mtx[2][0] = r2[0];
_mtx[2][1] = r2[1];
_mtx[2][2] = r2[2];
// divide out any homogeneous coordinate - unless it's zero
if (_mtx[3][3] != 1.0 && !GfIsClose(_mtx[3][3], 0.0, GF_MIN_VECTOR_LENGTH))
{
_mtx[3][0] /= _mtx[3][3];
_mtx[3][1] /= _mtx[3][3];
_mtx[3][2] /= _mtx[3][3];
_mtx[3][3] = 1.0;
}
if (!result && issueWarning)
TF_WARN("OrthogonalizeBasis did not converge, matrix may not be "
"orthonormal.");
return result;
}
开发者ID:JT-a，项目名称:USD，代码行数:43，代码来源:matrix4f.cpp
示例18: q0
void MSNewton::Fixed::submit_constraints(const NewtonJoint* joint, dgFloat32 timestep, int thread_index) {
JointData* joint_data = (JointData*)NewtonJointGetUserData(joint);
// Calculate position of pivot points and Jacobian direction vectors in global space.
dMatrix matrix0, matrix1, matrix2;
MSNewton::Joint::c_calculate_global_matrix(joint_data, matrix0, matrix1, matrix2);
const dVector& p0 = matrix0.m_posit;
const dVector& p1 = matrix1.m_posit;
// Get a point along the pin axis at some reasonable large distance from the pivot.
dVector q0(p0 + matrix0.m_right.Scale(MIN_JOINT_PIN_LENGTH));
dVector q1(p1 + matrix1.m_right.Scale(MIN_JOINT_PIN_LENGTH));
// Get the ankle point.
dVector r0(p0 + matrix0.m_front.Scale(MIN_JOINT_PIN_LENGTH));
dVector r1(p1 + matrix1.m_front.Scale(MIN_JOINT_PIN_LENGTH));
// Restrict movement on the pivot point along all three orthonormal directions
NewtonUserJointAddLinearRow(joint, &p0[0], &p1[0], &matrix0.m_front[0]);
if (joint_data->ctype == CT_FLEXIBLE)
NewtonUserJointSetRowSpringDamperAcceleration(joint, Joint::LINEAR_STIFF, Joint::LINEAR_DAMP);
else if (joint_data->ctype == CT_ROBUST)
NewtonUserJointSetRowAcceleration(joint, NewtonUserCalculateRowZeroAccelaration(joint));
NewtonUserJointSetRowStiffness(joint, joint_data->stiffness);
NewtonUserJointAddLinearRow(joint, &p0[0], &p1[0], &matrix0.m_up[0]);
if (joint_data->ctype == CT_FLEXIBLE)
NewtonUserJointSetRowSpringDamperAcceleration(joint, Joint::LINEAR_STIFF, Joint::LINEAR_DAMP);
else if (joint_data->ctype == CT_ROBUST)
NewtonUserJointSetRowAcceleration(joint, NewtonUserCalculateRowZeroAccelaration(joint));
NewtonUserJointSetRowStiffness(joint, joint_data->stiffness);
NewtonUserJointAddLinearRow(joint, &p0[0], &p1[0], &matrix0.m_right[0]);
if (joint_data->ctype == CT_FLEXIBLE)
NewtonUserJointSetRowSpringDamperAcceleration(joint, Joint::LINEAR_STIFF, Joint::LINEAR_DAMP);
else if (joint_data->ctype == CT_ROBUST)
NewtonUserJointSetRowAcceleration(joint, NewtonUserCalculateRowZeroAccelaration(joint));
NewtonUserJointSetRowStiffness(joint, joint_data->stiffness);
// Restrict rotation along all three orthonormal directions
NewtonUserJointAddLinearRow(joint, &q0[0], &q1[0], &matrix0.m_front[0]);
if (joint_data->ctype == CT_FLEXIBLE)
NewtonUserJointSetRowSpringDamperAcceleration(joint, Joint::LINEAR_STIFF, Joint::LINEAR_DAMP);
else if (joint_data->ctype == CT_ROBUST)
NewtonUserJointSetRowAcceleration(joint, NewtonUserCalculateRowZeroAccelaration(joint));
NewtonUserJointSetRowStiffness(joint, joint_data->stiffness);
NewtonUserJointAddLinearRow(joint, &q0[0], &q1[0], &matrix0.m_up[0]);
if (joint_data->ctype == CT_FLEXIBLE)
NewtonUserJointSetRowSpringDamperAcceleration(joint, Joint::LINEAR_STIFF, Joint::LINEAR_DAMP);
else if (joint_data->ctype == CT_ROBUST)
NewtonUserJointSetRowAcceleration(joint, NewtonUserCalculateRowZeroAccelaration(joint));
NewtonUserJointSetRowStiffness(joint, joint_data->stiffness);
NewtonUserJointAddLinearRow(joint, &r0[0], &r1[0], &matrix0.m_up[0]);
if (joint_data->ctype == CT_FLEXIBLE)
NewtonUserJointSetRowSpringDamperAcceleration(joint, Joint::LINEAR_STIFF, Joint::LINEAR_DAMP);
else if (joint_data->ctype == CT_ROBUST)
NewtonUserJointSetRowAcceleration(joint, NewtonUserCalculateRowZeroAccelaration(joint));
NewtonUserJointSetRowStiffness(joint, joint_data->stiffness);
}
开发者ID:chegarty3，项目名称:MSPhysics，代码行数:60，代码来源:msp_joint_fixed.cpp
示例19: sc_main
int sc_main(int argc, char* argv[])
{
sc_signal<bool> t_a0;
sc_signal<bool> t_a1;
sc_signal<bool> t_a2;
sc_signal<bool> t_a3;
sc_signal<bool> t_b0;
sc_signal<bool> t_b1;
sc_signal<bool> t_b2;
sc_signal<bool> t_b3;
sc_signal<bool> t_c0;
sc_signal<bool> t_s0;
sc_signal<bool> t_s1;
sc_signal<bool> t_s2;
sc_signal<bool> t_s3;
sc_signal<bool> t_c4;
ripple_adder r0("r0");
r0.a0(t_a0);
r0.a1(t_a1);
r0.a2(t_a2);
r0.a3(t_a3);
r0.b0(t_b0);
r0.b1(t_b1);
r0.b2(t_b2);
r0.b3(t_b3);
r0.c0(t_c0);
r0.s0(t_s0);
r0.s1(t_s1);
r0.s2(t_s2);
r0.s3(t_s3);
r0.c4(t_c4);
ripple_adder_driver d0("d0");
d0.d_a0(t_a0);
d0.d_a1(t_a1);
d0.d_a2(t_a2);
d0.d_a3(t_a3);
d0.d_b0(t_b0);
d0.d_b1(t_b1);
d0.d_b2(t_b2);
d0.d_b3(t_b3);
d0.d_c0(t_c0);
ripple_adder_monitor m0("m0");
m0.m_a0(t_a0);
m0.m_a1(t_a1);
m0.m_a2(t_a2);
m0.m_a3(t_a3);
m0.m_b0(t_b0);
m0.m_b1(t_b1);
m0.m_b2(t_b2);
m0.m_b3(t_b3);
m0.m_c0(t_c0);
m0.m_s0(t_s0);
m0.m_s1(t_s1);
m0.m_s2(t_s2);
m0.m_s3(t_s3);
m0.m_c4(t_c4);
// simulate for max 1000 ns
sc_start(1, SC_SEC);
return 0;
}
开发者ID:derekdm3，项目名称:systemc，代码行数:60，代码来源:ripple_adder_test.cpp
示例20: num_replications
UIntT num_replications(RealT eps, RealT s0, RealT level=0.95, UIntT max_trials=::std::numeric_limits<UIntT>::max())
{
UIntT r0(0);
r0 = num_replications_initial<RealT,UIntT>(eps, s0, level);
return num_replications(eps, r0, s0, level, max_trials);
}
开发者ID:abhi12ravi，项目名称:dcsxx-des，代码行数:7，代码来源:utility.hpp
注：本文中的r0函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论