C++ r_debug_is_dead函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中r_debug_is_dead函数的典型用法代码示例。如果您正苦于以下问题：C++ r_debug_is_dead函数的具体用法？C++ r_debug_is_dead怎么用？C++ r_debug_is_dead使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了r_debug_is_dead函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: r_debug_continue_until

R_API int r_debug_continue_until(RDebug *dbg, ut64 addr) {
	int has_bp;
	ut64 pc;

	if (r_debug_is_dead (dbg))
		return R_FALSE;

	// Check if there was another breakpoint set at addr
	has_bp = r_bp_get_in (dbg->bp, addr, R_BP_PROT_EXEC) != NULL;
	if (!has_bp)
		r_bp_add_sw (dbg->bp, addr, dbg->bpsize, R_BP_PROT_EXEC);

	// Continue until the bp is reached
	for (;;) {
		if (r_debug_is_dead (dbg))
			break;

		pc = r_debug_reg_get (dbg, dbg->reg->name[R_REG_NAME_PC]);
		if (pc == addr)
			break;
		if (r_bp_get_at (dbg->bp, pc))
                        break;
		r_debug_continue (dbg);
	}

	// Clean up if needed
	if (!has_bp)
		r_bp_del (dbg->bp, addr);

	return R_TRUE;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:31，代码来源:debug.c

示例2: r_debug_continue_syscall

// XXX: this function uses 'oeax' which is linux-i386-specific
R_API int r_debug_continue_syscall(struct r_debug_t *dbg, int sc) {
	int reg, ret = R_FALSE;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (dbg && dbg->h) {
		if (dbg->h->contsc) {
			do {
				ret = dbg->h->contsc (dbg, dbg->pid, sc);
				if (!r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE)) {
					eprintf ("--> eol\n");
					sc = 0;
					break;
				}
				reg = (int)r_debug_reg_get (dbg, "oeax"); // XXX
				eprintf ("--> syscall %d\n", reg);
				if (reg == 0LL)
					break;
				// TODO: must use r_core_cmd(as)..import code from rcore
			} while (sc != 0 && sc != reg);
		} else {
			r_debug_continue_until_optype (dbg, R_ANAL_OP_TYPE_SWI, 0);
			reg = (int)r_debug_reg_get (dbg, "oeax"); // XXX
			eprintf ("--> syscall %d\n", reg);
		}
	}
	return ret;
}

开发者ID:josdiaz，项目名称:radare2，代码行数:28，代码来源:debug.c

示例3: r_debug_step_hard

R_API int r_debug_step_hard(RDebug *dbg) {
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (!dbg->h->step (dbg))
		return R_FALSE;
	return r_debug_wait (dbg);
}

开发者ID:retrohacker，项目名称:radare2，代码行数:7，代码来源:debug.c

示例4: r_debug_wait

/* Returns PID */
R_API int r_debug_wait(RDebug *dbg) {
	int ret = 0;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (dbg && dbg->h && dbg->h->wait) {
		dbg->reason = R_DBG_REASON_UNKNOWN;
		ret = dbg->h->wait (dbg, dbg->pid);
		dbg->reason = ret;
		dbg->newstate = 1;
		if (ret == -1) {
			eprintf ("\n==> Process finished\n\n");
			r_debug_select (dbg, -1, -1);
		}
		//eprintf ("wait = %d\n", ret);
		if (dbg->trace->enabled)
			r_debug_trace_pc (dbg);
		if (ret == R_DBG_REASON_SIGNAL && dbg->signum != -1) {
			/* handle signal on continuations here */
			int what = r_debug_signal_what (dbg, dbg->signum);
			const char *name = r_debug_signal_resolve_i (dbg, dbg->signum);
			if (strcmp ("SIGTRAP", name))
				r_cons_printf ("[+] signal %d aka %s received\n",
					dbg->signum, name);
			if (what & R_DBG_SIGNAL_SKIP) {
				dbg->signum = 0;
				// TODO: use ptrace-setsiginfo to ignore signal
			}
			if (what & R_DBG_SIGNAL_CONT) {
				// XXX: support step, steptrace, continue_until_foo, etc..
				r_debug_continue (dbg);
			}
		}
	}
	return ret;
}

开发者ID:BatchDrake，项目名称:radare2，代码行数:36，代码来源:debug.c

示例5: r_debug_wait

/* Returns PID */
R_API int r_debug_wait(RDebug *dbg) {
	int ret = 0;
	if (!dbg)
		return R_FALSE;
	dbg->reason.type = R_DEBUG_REASON_UNKNOWN;
	if (r_debug_is_dead (dbg)) {
		return dbg->reason.type = R_DEBUG_REASON_DEAD;
	}
	if (dbg->h && dbg->h->wait) {
		dbg->reason.type = R_DEBUG_REASON_UNKNOWN;
		ret = dbg->h->wait (dbg, dbg->pid);
		dbg->newstate = 1;
		if (ret == -1) {
			eprintf ("\n==> Process finished\n\n");
			r_debug_select (dbg, -1, -1);
		}
		//eprintf ("wait = %d\n", ret);
		if (dbg->trace->enabled)
			r_debug_trace_pc (dbg);
		if (ret == R_DEBUG_REASON_SIGNAL && dbg->reason.signum != -1) {
			/* handle signal on continuations here */
			int what = r_debug_signal_what (dbg, dbg->reason.signum);
			const char *name = r_debug_signal_resolve_i (dbg, dbg->reason.signum);
			if (name && strcmp ("SIGTRAP", name))
				r_cons_printf ("[+] signal %d aka %s received %d\n",
						dbg->reason.signum, name, what);
		}
	}
	return ret;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:31，代码来源:debug.c

示例6: r_debug_recoil

/* restore program counter after breakpoint hit */
static int r_debug_recoil(RDebug *dbg) {
	int recoil;
	RRegItem *ri;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
	ri = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], -1);
	dbg->reason.bpi = NULL;
	if (ri) {
		ut64 addr = r_reg_get_value (dbg->reg, ri);
		recoil = r_bp_recoil (dbg->bp, addr);
		//eprintf ("[R2] Breakpoint recoil at 0x%"PFMT64x" = %d\n", addr, recoil);
#if __arm__
		if (recoil<1) recoil = 0; // XXX Hack :D
#else
		if (recoil<1) recoil = 0; //1; // XXX Hack :D (x86 only?)
#endif
		if (recoil) {
			dbg->reason.type = R_DEBUG_REASON_BREAKPOINT;
			dbg->reason.bpi = r_bp_get_at (dbg->bp, addr-recoil);
			dbg->reason.addr = addr - recoil;
			r_reg_set_value (dbg->reg, ri, addr-recoil);
			if (r_reg_get_value (dbg->reg, ri) != (addr-recoil)) {
				eprintf ("r_debug_recoil: Cannot set program counter\n");
				return R_FALSE;
			}
			r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_TRUE);
			//eprintf ("[BP Hit] Setting pc to 0x%"PFMT64x"\n", (addr-recoil));
			return R_TRUE;
		}
	} else eprintf ("r_debug_recoil: Cannot get program counter\n");
	return R_FALSE;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:34，代码来源:debug.c

示例7: r_debug_continue_until_optype

/* optimization: avoid so many reads */
R_API int r_debug_continue_until_optype(RDebug *dbg, int type, int over) {
	int (*step)(RDebug *d, int n);
	int ret, n = 0;
	ut64 pc = 0;
	RAnalOp op;
	ut8 buf[64];

	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (dbg->anal && dbg->reg) {
		const char *pcreg = dbg->reg->name[R_REG_NAME_PC];
		step = over? r_debug_step_over: r_debug_step;
		for (;;) {
			pc = r_debug_reg_get (dbg, pcreg);
			dbg->iob.read_at (dbg->iob.io, pc, buf, sizeof (buf));
			ret = r_anal_op (dbg->anal, &op, pc, buf, sizeof (buf));
			if (ret>0 && op.type&type)
				break;
			if (!step (dbg, 1)) {
				eprintf ("r_debug_step: failed\n");
				break;
			}
			n++;
		}
	} else eprintf ("Undefined pointer at dbg->anal\n");
	return n;
}

开发者ID:josdiaz，项目名称:radare2，代码行数:28，代码来源:debug.c

示例8: r_debug_step_over

R_API int r_debug_step_over(RDebug *dbg, int steps) {
	RAnalOp op;
	ut8 buf[64];
	int ret = -1;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (dbg->h && dbg->h->step_over) {
		if (steps<1) steps = 1;
		while (steps--)
			if (!dbg->h->step_over (dbg))
				return R_FALSE;
		return R_TRUE;
	}
	if (dbg->anal && dbg->reg) {
		ut64 pc = r_debug_reg_get (dbg, dbg->reg->name[R_REG_NAME_PC]);
		dbg->iob.read_at (dbg->iob.io, pc, buf, sizeof (buf));
		r_anal_op (dbg->anal, &op, pc, buf, sizeof (buf));
		if (op.type & R_ANAL_OP_TYPE_CALL
		   || op.type & R_ANAL_OP_TYPE_UCALL) {
			ut64 bpaddr = pc + op.length;
			r_bp_add_sw (dbg->bp, bpaddr, 1, R_BP_PROT_EXEC);
			ret = r_debug_continue (dbg);
			r_bp_del (dbg->bp, bpaddr);
		} else {
			ret = r_debug_step (dbg, 1);
		}
	} else eprintf ("Undefined debugger backend\n");
	return ret;
}

开发者ID:josdiaz，项目名称:radare2，代码行数:29，代码来源:debug.c

示例9: r_debug_step_soft

// XXX: very experimental
R_API int r_debug_step_soft(RDebug *dbg) {
	int ret;
	ut8 buf[32];
	RAnalOp op;
	ut64 pc0, pc1, pc2;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	pc0 = r_debug_reg_get (dbg, dbg->reg->name[R_REG_NAME_PC]);
	dbg->iob.read_at (dbg->iob.io, pc0, buf, sizeof (buf));
	ret = r_anal_op (dbg->anal, &op, pc0, buf, sizeof (buf));
//eprintf ("read from pc0 = 0x%llx\n", pc0);
	pc1 = pc0 + op.length;
//eprintf ("oplen = %d\n", op.length);
//eprintf ("breakpoint at pc1 = 0x%llx\n", pc1);
	// XXX: Does not works for 'ret'
	pc2 = op.jump? op.jump: 0;
//eprintf ("ADD SECOND BREAKPOINT FRO CALLS %llx\n", op.jump);
//eprintf ("breakpoint 2 at pc2 = 0x%llx\n", pc2);

	r_bp_add_sw (dbg->bp, pc1, 4, R_BP_PROT_EXEC);
	if (pc2) r_bp_add_sw (dbg->bp, pc2, 4, R_BP_PROT_EXEC);
	r_debug_continue (dbg);
//eprintf ("wait\n");
	//r_debug_wait (dbg);
//eprintf ("del\n");
	r_bp_del (dbg->bp, pc1);
	if (pc2) r_bp_del (dbg->bp, pc2);

	return ret;
}

开发者ID:josdiaz，项目名称:radare2，代码行数:31，代码来源:debug.c

示例10: r_debug_step

R_API int r_debug_step(RDebug *dbg, int steps) {
	int i, ret;

	if (!dbg || !dbg->h)
		return R_FALSE;
	dbg->reason.type = R_DEBUG_REASON_STEP;

	if (r_debug_is_dead (dbg)) {
		return R_FALSE;
	}

	if (steps < 1)
		steps = 1;

	for (i = 0; i < steps; i++) {
		ret = dbg->swstep?
			r_debug_step_soft (dbg):
			r_debug_step_hard (dbg);
		if (!ret) {
			eprintf ("Stepping failed!\n");
			return R_FALSE;
		} else {
			dbg->steps++;
			dbg->reason.type = R_DEBUG_REASON_STEP;
			//dbg->reason.addr = 
		}
	}

	return i;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:30，代码来源:debug.c

示例11: r_debug_recoil

/* restore program counter after breakpoint hit */
static int r_debug_recoil(RDebug *dbg) {
	int recoil;
	RRegItem *ri;
	if (r_debug_is_dead (dbg)) {
		return false;
	}
	r_debug_reg_sync (dbg, R_REG_TYPE_GPR, false);
	ri = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], -1);
	dbg->reason.bpi = NULL;
	if (ri) {
		ut64 addr = r_reg_get_value (dbg->reg, ri);
		recoil = r_bp_recoil (dbg->bp, addr - dbg->bpsize);
		//eprintf ("[R2] Breakpoint recoil at 0x%"PFMT64x" = %d\n", addr, recoil);
		if (recoil < 1)
			recoil = 0; // XXX Hack :D
		if (recoil) {
			dbg->in_recoil = true;
			dbg->reason.type = R_DEBUG_REASON_BREAKPOINT;
			dbg->reason.bpi = r_bp_get_at (dbg->bp, addr-recoil);
			dbg->reason.addr = addr - recoil;
			r_reg_set_value (dbg->reg, ri, addr-recoil);
			if (r_reg_get_value (dbg->reg, ri) != (addr-recoil)) {
				eprintf ("r_debug_recoil: Cannot set program counter\n");
				return false;
			}
			r_debug_reg_sync (dbg, R_REG_TYPE_GPR, true);
			//eprintf ("[BP Hit] Setting pc to 0x%"PFMT64x"\n", (addr-recoil));
			return true;
		}
	} else {
		eprintf ("r_debug_recoil: Cannot get program counter\n");
	}
	return false;
}

开发者ID:GamdAi，项目名称:radare2，代码行数:35，代码来源:debug.c

示例12: r_debug_continue_until

R_API int r_debug_continue_until(struct r_debug_t *dbg, ut64 addr) {
// TODO: use breakpoint+continue... more efficient
	int n = 0;
	ut64 pc = 0;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	do {
		if (pc !=0) r_debug_step (dbg, 1);
		n++;
	} while (pc != addr && !r_debug_is_dead (dbg));
	return n;
	//struct r_debug_bp_t *bp = r_debug_bp_add (dbg, addr);
	//int ret = r_debug_continue(dbg);
	/* TODO: check if the debugger stops at the right address */
	//r_debug_bp_del(dbg, bp);
	//return -1;
}

开发者ID:josdiaz，项目名称:radare2，代码行数:17，代码来源:debug.c

示例13: r_debug_step_hard

R_API int r_debug_step_hard(RDebug *dbg) {
	dbg->reason.type = R_DEBUG_REASON_STEP;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (!dbg->h->step (dbg))
		return R_FALSE;
	return r_debug_wait (dbg);
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:8，代码来源:debug.c

示例14: r_debug_execute

/* 
 * Save 4096 bytes from %esp
 * TODO: Add support for reverse stack architectures
 * Also known as r_debug_inject()
 */
R_API ut64 r_debug_execute(RDebug *dbg, const ut8 *buf, int len, int restore) {
	int orig_sz;
	ut8 stackbackup[4096];
	ut8 *backup, *orig = NULL;
	RRegItem *ri, *risp, *ripc;
	ut64 rsp, rpc, ra0 = 0LL;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	ripc = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], R_REG_TYPE_GPR);
	risp = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_SP], R_REG_TYPE_GPR);
	if (ripc) {
		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
		orig = r_reg_get_bytes (dbg->reg, -1, &orig_sz);
		if (orig == NULL) {
			eprintf ("Cannot get register arena bytes\n");
			return 0LL;
		}
		rpc = r_reg_get_value (dbg->reg, ripc);
		rsp = r_reg_get_value (dbg->reg, risp);

		backup = malloc (len);
		if (backup == NULL) {
			free (orig);
			return 0LL;
		}
		dbg->iob.read_at (dbg->iob.io, rpc, backup, len);
		dbg->iob.read_at (dbg->iob.io, rsp, stackbackup, len);

		r_bp_add_sw (dbg->bp, rpc+len, dbg->bpsize, R_BP_PROT_EXEC);

		/* execute code here */
		dbg->iob.write_at (dbg->iob.io, rpc, buf, len);
	//r_bp_add_sw (dbg->bp, rpc+len, 4, R_BP_PROT_EXEC);
		r_debug_continue (dbg);
	//r_bp_del (dbg->bp, rpc+len);
		/* TODO: check if stopped in breakpoint or not */

		r_bp_del (dbg->bp, rpc+len);
		dbg->iob.write_at (dbg->iob.io, rpc, backup, len);
		if (restore) {
			dbg->iob.write_at (dbg->iob.io, rsp, stackbackup, len);
		}

		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
		ri = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_A0], R_REG_TYPE_GPR);
		ra0 = r_reg_get_value (dbg->reg, ri);
		if (restore) {
			r_reg_set_bytes (dbg->reg, -1, orig, orig_sz);
		} else {
			r_reg_set_value (dbg->reg, ripc, rpc);
		}
		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_TRUE);
		free (backup);
		free (orig);
		eprintf ("ra0=0x%08"PFMT64x"\n", ra0);
	} else eprintf ("r_debug_execute: Cannot get program counter\n");
	return (ra0);
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:63，代码来源:debug.c

示例15: r_debug_step_hard

R_API int r_debug_step_hard(RDebug *dbg) {
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (!dbg->h->step (dbg))
		return R_FALSE;
	r_debug_wait (dbg);
	/* return value ignored? */
	return R_TRUE;
}

开发者ID:josdiaz，项目名称:radare2，代码行数:9，代码来源:debug.c

示例16: r_debug_kill

R_API int r_debug_kill(RDebug *dbg, int pid, int tid, int sig) {
	int ret = R_FALSE;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	if (dbg->h && dbg->h->kill)
		ret = dbg->h->kill (dbg, pid, tid, sig);
	else eprintf ("Backend does not implements kill()\n");
	return ret;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:9，代码来源:debug.c

示例17: r_debug_continue_until_optype

R_API int r_debug_continue_until_optype(RDebug *dbg, int type, int over) {
	int ret, n = 0;
	ut64 pc, buf_pc = 0;
	RAnalOp op;
	ut8 buf[DBG_BUF_SIZE];

	if (r_debug_is_dead (dbg)) {
		return R_FALSE;
	}

	if (!dbg->anal || !dbg->reg) { 
		eprintf ("Undefined pointer at dbg->anal\n");
		return R_FALSE;
	}

	r_debug_step (dbg, 1);
	r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);

	// Initial refill
	buf_pc = r_debug_reg_get (dbg, dbg->reg->name[R_REG_NAME_PC]);
	dbg->iob.read_at (dbg->iob.io, buf_pc, buf, sizeof (buf));

	// step first, we dont want to check current optype
	for (;;) {
		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
		pc = r_debug_reg_get (dbg, dbg->reg->name[R_REG_NAME_PC]);
		// Try to keep the buffer full 
		if (pc - buf_pc > sizeof (buf)) { 
			buf_pc = pc;
			dbg->iob.read_at (dbg->iob.io, buf_pc, buf, sizeof (buf));
		}
		// Analyze the opcode
		if (!r_anal_op (dbg->anal, &op, pc, buf + (pc - buf_pc), sizeof (buf) - (pc - buf_pc))) {
			eprintf ("Decode error at %"PFMT64x"\n", pc);
			return R_FALSE;
		}
		if (op.type == type) 
			break;
		// Step over and repeat
		ret = over ?
			r_debug_step_over (dbg, 1) :
			r_debug_step (dbg, 1);

		if (!ret) {
			eprintf ("r_debug_step: failed\n");
			break;
		}
		n++;
	}

	return n;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:52，代码来源:debug.c

示例18: r_debug_reg_sync

R_API int r_debug_reg_sync(RDebug *dbg, int type, int write) {
	int i, size;
	if (!dbg || !dbg->reg || !dbg->h)
		return R_FALSE;

	// Theres no point in syncing a dead target
	if (r_debug_is_dead (dbg))
		return R_FALSE;

	// Check if the functions needed are available
	if (write && !dbg->h->reg_write)
		return R_FALSE;
	if (!write && !dbg->h->reg_read)
		return R_FALSE;

	// Sync all the types sequentially if asked
	i = (type == R_REG_TYPE_ALL) ? R_REG_TYPE_GPR : type;

	do {
		if (write) {
			ut8 *buf = r_reg_get_bytes (dbg->reg, i, &size);
			if (!buf || !dbg->h->reg_write (dbg, i, buf, size)) {
				if (i==0)
					eprintf ("r_debug_reg: error writing registers %d to %d\n", i, dbg->pid);
				return R_FALSE;
			}
		} else {
			//int bufsize = R_MAX (1024, dbg->reg->size*2); // i know. its hacky
			int bufsize = dbg->reg->size;
			ut8 *buf = malloc (bufsize);
			if (!buf) return R_FALSE;
			//we have already checked dbg->h and dbg->h->reg_read above
			size = dbg->h->reg_read (dbg, i, buf, bufsize);
			// we need to check against zero because reg_read can return R_FALSE
			if (!size) {
				eprintf ("r_debug_reg: error reading registers\n");
				free (buf);
				return R_FALSE;
			} else
				r_reg_set_bytes (dbg->reg, i, buf, R_MIN(size, bufsize));

			free (buf);
		}
		// DO NOT BREAK R_REG_TYPE_ALL PLEASE
		//   break;

		// Continue the syncronization or just stop if it was asked only for a single type of regs 
	} while ((type==R_REG_TYPE_ALL) && (i++ < R_REG_TYPE_LAST));
	return R_TRUE;
}

开发者ID:astrotycoon，项目名称:radare2，代码行数:50，代码来源:reg.c

示例19: r_debug_continue_syscalls

R_API int r_debug_continue_syscalls(RDebug *dbg, int *sc, int n_sc) {
	int i, reg, ret = R_FALSE;
	if (!dbg || !dbg->h || r_debug_is_dead (dbg))
		return R_FALSE;
	if (!dbg->h->contsc) {
		/* user-level syscall tracing */
		r_debug_continue_until_optype (dbg, R_ANAL_OP_TYPE_SWI, 0);
		return show_syscall (dbg, "a0");
	}

	if (!r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE)) {
		eprintf ("--> cannot read registers\n");
		return -1;
	}
	{
		int err;
		reg = (int)r_debug_reg_get_err (dbg, "sn", &err);
		if (err) {
			eprintf ("Cannot find 'sn' register for current arch-os.\n");
			return -1;
		}
	}
	for (;;) {
		if (r_cons_singleton()->breaked)
			break;
#if __linux__
		// step is needed to avoid dupped contsc results
		r_debug_step (dbg, 1);
#endif
		dbg->h->contsc (dbg, dbg->pid, 0); // TODO handle return value
		// wait until continuation
		r_debug_wait (dbg);
		if (!r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE)) {
			eprintf ("--> cannot sync regs, process is probably dead\n");
			return -1;
		}
		reg = show_syscall (dbg, "sn");
		if (n_sc == -1)
			continue;
		if (n_sc == 0) {
			break;
		}
		for (i=0; i<n_sc; i++) {
			if (sc[i] == reg)
				return reg;
		}
		// TODO: must use r_core_cmd(as)..import code from rcore
	}
	return ret;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:50，代码来源:debug.c

示例20: r_debug_continue_until

R_API int r_debug_continue_until(RDebug *dbg, ut64 addr) {
// TODO: use breakpoint+continue... more efficient
	RRegItem *ripc = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], R_REG_TYPE_GPR);
	int n = 0;
	ut64 pc = r_reg_get_value (dbg->reg, ripc);
	while (pc != addr && !r_debug_is_dead (dbg)) {
		r_debug_step (dbg, 1);
		// TODO: obey breakpoints too?
	/* TODO: check if the debugger stops at the right address */
		pc = r_reg_get_value (dbg->reg, ripc);
		n++;
	}
	return n;
}

开发者ID:cephurs，项目名称:radare2，代码行数:14，代码来源:debug.c

注：本文中的r_debug_is_dead函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ r_delete_entry函数代码示例发布时间：2022-05-30

C++ r_core_seek函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17984|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9573|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8130|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8513|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8417|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9312|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8379|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7813|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8365|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7363|2022-11-06

客服电话

电子邮件

C++ r_debug_is_dead函数代码示例

示例1: r_debug_continue_until

示例2: r_debug_continue_syscall

示例3: r_debug_step_hard

示例4: r_debug_wait

示例5: r_debug_wait

示例6: r_debug_recoil

示例7: r_debug_continue_until_optype

示例8: r_debug_step_over

示例9: r_debug_step_soft

示例10: r_debug_step

示例11: r_debug_recoil

示例12: r_debug_continue_until

示例13: r_debug_step_hard

示例14: r_debug_execute

示例15: r_debug_step_hard

示例16: r_debug_kill

示例17: r_debug_continue_until_optype

示例18: r_debug_reg_sync

示例19: r_debug_continue_syscalls

示例20: r_debug_continue_until

请发表评论

全部评论

上一篇：

下一篇：

opencost/opencost: Cross-cloud cost allo

Sazito/phoenix: A simple boilerplate tha

mokarakaya/spring-boot-multi-module-mave

用MATLAB对信号做频谱分析 - 逸阳

MiguelCatalan/MaterialSearchView: Cute l

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053