C++ r_reg_get函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中r_reg_get函数的典型用法代码示例。如果您正苦于以下问题：C++ r_reg_get函数的具体用法？C++ r_reg_get怎么用？C++ r_reg_get使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了r_reg_get函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: r_debug_execute

/* 
 * Save 4096 bytes from %esp
 * TODO: Add support for reverse stack architectures
 * Also known as r_debug_inject()
 */
R_API ut64 r_debug_execute(RDebug *dbg, const ut8 *buf, int len, int restore) {
	int orig_sz;
	ut8 stackbackup[4096];
	ut8 *backup, *orig = NULL;
	RRegItem *ri, *risp, *ripc;
	ut64 rsp, rpc, ra0 = 0LL;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	ripc = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], R_REG_TYPE_GPR);
	risp = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_SP], R_REG_TYPE_GPR);
	if (ripc) {
		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
		orig = r_reg_get_bytes (dbg->reg, -1, &orig_sz);
		if (orig == NULL) {
			eprintf ("Cannot get register arena bytes\n");
			return 0LL;
		}
		rpc = r_reg_get_value (dbg->reg, ripc);
		rsp = r_reg_get_value (dbg->reg, risp);

		backup = malloc (len);
		if (backup == NULL) {
			free (orig);
			return 0LL;
		}
		dbg->iob.read_at (dbg->iob.io, rpc, backup, len);
		dbg->iob.read_at (dbg->iob.io, rsp, stackbackup, len);

		r_bp_add_sw (dbg->bp, rpc+len, dbg->bpsize, R_BP_PROT_EXEC);

		/* execute code here */
		dbg->iob.write_at (dbg->iob.io, rpc, buf, len);
	//r_bp_add_sw (dbg->bp, rpc+len, 4, R_BP_PROT_EXEC);
		r_debug_continue (dbg);
	//r_bp_del (dbg->bp, rpc+len);
		/* TODO: check if stopped in breakpoint or not */

		r_bp_del (dbg->bp, rpc+len);
		dbg->iob.write_at (dbg->iob.io, rpc, backup, len);
		if (restore) {
			dbg->iob.write_at (dbg->iob.io, rsp, stackbackup, len);
		}

		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
		ri = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_A0], R_REG_TYPE_GPR);
		ra0 = r_reg_get_value (dbg->reg, ri);
		if (restore) {
			r_reg_set_bytes (dbg->reg, -1, orig, orig_sz);
		} else {
			r_reg_set_value (dbg->reg, ripc, rpc);
		}
		r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_TRUE);
		free (backup);
		free (orig);
		eprintf ("ra0=0x%08"PFMT64x"\n", ra0);
	} else eprintf ("r_debug_execute: Cannot get program counter\n");
	return (ra0);
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:63，代码来源:debug.c

示例2: r_reg_get_value

// XXX: Do this work correctly?
static RList *backtrace_x86_64_anal(RDebug *dbg, ut64 at) {
	int i;
	ut8 buf[8];
	RDebugFrame *frame;
	ut64 ptr, ebp2 = UT64_MAX;
	ut64 _rip, _rbp;
	RList *list;
	RReg *reg = dbg->reg;
	RIOBind *bio = &dbg->iob;
	RAnalFunction *fcn;

	_rip = r_reg_get_value (reg, r_reg_get (reg, "rip", R_REG_TYPE_GPR));
	if (at == UT64_MAX) {
		//_rsp = r_reg_get_value (reg, r_reg_get (reg, "rsp", R_REG_TYPE_GPR));
		_rbp = r_reg_get_value (reg, r_reg_get (reg, "rbp", R_REG_TYPE_GPR));
	} else {
		_rbp = at;
	}

	list = r_list_new ();
	list->free = free;
	bio->read_at (bio->io, _rip, (ut8*)&buf, 8);

	// TODO : frame->size by using esil to emulate first instructions
	fcn = r_anal_get_fcn_in (dbg->anal, _rip, R_ANAL_FCN_TYPE_NULL);
	if (fcn) {
		frame = R_NEW0 (RDebugFrame);
		frame->addr = _rip;
		frame->size = 0;
		frame->sp = _rbp;
		frame->bp = _rbp + 8; // XXX
		r_list_append (list, frame);
	}

	for (i=1; i<dbg->btdepth; i++) {
		// TODO: make those two reads in a shot
		bio->read_at (bio->io, _rbp, (ut8*)&ebp2, 8);
		if (ebp2 == UT64_MAX)
			break;
		bio->read_at (bio->io, _rbp+8, (ut8*)&ptr, 8);
		if (!ptr || !_rbp)
			break;
		//fcn = r_anal_get_fcn_in (dbg->anal, ptr, R_ANAL_FCN_TYPE_NULL);
		frame = R_NEW0 (RDebugFrame);
		frame->addr = ptr;
		frame->size = 0;
		frame->sp = _rbp;
		frame->bp = _rbp + 8;
		//frame->name = (fcn && fcn->name) ? strdup (fcn->name) : NULL;
		r_list_append (list, frame);
		_rbp = ebp2;
	}

	return list;
}

开发者ID:PankajKataria，项目名称:radare2，代码行数:56，代码来源:generic-x64.c

示例3: r_debug_recoil

/* restore program counter after breakpoint hit */
static int r_debug_recoil(RDebug *dbg) {
	int recoil;
	RRegItem *ri;
	if (r_debug_is_dead (dbg))
		return R_FALSE;
	r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_FALSE);
	ri = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], -1);
	dbg->reason.bpi = NULL;
	if (ri) {
		ut64 addr = r_reg_get_value (dbg->reg, ri);
		recoil = r_bp_recoil (dbg->bp, addr);
		//eprintf ("[R2] Breakpoint recoil at 0x%"PFMT64x" = %d\n", addr, recoil);
#if __arm__
		if (recoil<1) recoil = 0; // XXX Hack :D
#else
		if (recoil<1) recoil = 0; //1; // XXX Hack :D (x86 only?)
#endif
		if (recoil) {
			dbg->reason.type = R_DEBUG_REASON_BREAKPOINT;
			dbg->reason.bpi = r_bp_get_at (dbg->bp, addr-recoil);
			dbg->reason.addr = addr - recoil;
			r_reg_set_value (dbg->reg, ri, addr-recoil);
			if (r_reg_get_value (dbg->reg, ri) != (addr-recoil)) {
				eprintf ("r_debug_recoil: Cannot set program counter\n");
				return R_FALSE;
			}
			r_debug_reg_sync (dbg, R_REG_TYPE_GPR, R_TRUE);
			//eprintf ("[BP Hit] Setting pc to 0x%"PFMT64x"\n", (addr-recoil));
			return R_TRUE;
		}
	} else eprintf ("r_debug_recoil: Cannot get program counter\n");
	return R_FALSE;
}

开发者ID:Kakkoroid，项目名称:radare2，代码行数:34，代码来源:debug.c

示例4: r_debug_recoil

/* restore program counter after breakpoint hit */
static int r_debug_recoil(RDebug *dbg) {
	int recoil;
	RRegItem *ri;
	if (r_debug_is_dead (dbg)) {
		return false;
	}
	r_debug_reg_sync (dbg, R_REG_TYPE_GPR, false);
	ri = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], -1);
	dbg->reason.bpi = NULL;
	if (ri) {
		ut64 addr = r_reg_get_value (dbg->reg, ri);
		recoil = r_bp_recoil (dbg->bp, addr - dbg->bpsize);
		//eprintf ("[R2] Breakpoint recoil at 0x%"PFMT64x" = %d\n", addr, recoil);
		if (recoil < 1)
			recoil = 0; // XXX Hack :D
		if (recoil) {
			dbg->in_recoil = true;
			dbg->reason.type = R_DEBUG_REASON_BREAKPOINT;
			dbg->reason.bpi = r_bp_get_at (dbg->bp, addr-recoil);
			dbg->reason.addr = addr - recoil;
			r_reg_set_value (dbg->reg, ri, addr-recoil);
			if (r_reg_get_value (dbg->reg, ri) != (addr-recoil)) {
				eprintf ("r_debug_recoil: Cannot set program counter\n");
				return false;
			}
			r_debug_reg_sync (dbg, R_REG_TYPE_GPR, true);
			//eprintf ("[BP Hit] Setting pc to 0x%"PFMT64x"\n", (addr-recoil));
			return true;
		}
	} else {
		eprintf ("r_debug_recoil: Cannot get program counter\n");
	}
	return false;
}

开发者ID:GamdAi，项目名称:radare2，代码行数:35，代码来源:debug.c

示例5: r_reg_type_by_name

static const char *parse_def(RReg *reg, char **tok, const int n) {
	RRegItem *item;
	char *end;
	int type;

	if (n != 5 && n != 6)
		return "Invalid syntax";

	type = r_reg_type_by_name (tok[0]);
	if (type < 0) {
		return "Invalid register type";
	}

	item = R_NEW0 (RRegItem);
	if (!item) return "Unable to allocate memory";

	item->type = type;
	item->name = strdup (tok[1]);
	// All the numeric arguments are strictly checked
	item->size = parse_size (tok[2], &end);
	if (*end != '\0' || !item->size) {
		r_reg_item_free (item);
		return "Invalid size";
	}
	item->offset = parse_size (tok[3], &end);
	if (*end != '\0') {
		r_reg_item_free (item);
		return "Invalid offset";
	}
	item->packed_size = parse_size (tok[4], &end);
	if (*end != '\0') {
		r_reg_item_free (item);
		return "Invalid packed size";
	}

	// Dynamically update the list of supported bit sizes
	reg->bits |= item->size;

	// This is optional
	if (n == 6)
		item->flags = strdup (tok[5]);

	// Don't allow duplicate registers
	if (r_reg_get (reg, item->name, R_REG_TYPE_ALL)) {
		r_reg_item_free (item);
		return "Duplicate register definition";
	}
	/* Hack to put flags in the same arena as gpr */
	if (type == R_REG_TYPE_FLG) {
		type = R_REG_TYPE_GPR;
	}

	r_list_append (reg->regset[item->type].regs, item);

	// Update the overall profile size
	if (item->offset + item->size > reg->size) {
		reg->size = item->offset + item->size;
	}
	return NULL;
}

开发者ID:Lukas-Dresel，项目名称:radare2，代码行数:60，代码来源:profile.c

示例6: r_anal_value_new

/* io.mem_base = reg1; io.mem_index = reg2; io.disp = 0x0ff */
static RAnalValue *anal_fill_ai_mm(RAnal *anal, x86im_instr_object io) {
	RAnalValue *ret = r_anal_value_new ();
	st64 disp = r_hex_bin_truncate (io.disp, io.disp_size);
	ret->memref = anal->bits/8;
	if (io.mem_base == 0) {
		ret->base = disp;
	} else {
		ret->reg = r_reg_get (anal->reg,
				anal_reg (io.mem_base), R_REG_TYPE_GPR);
		ret->delta = disp;
		if (io.mem_index != 0)
			ret->regdelta = r_reg_get (anal->reg,
					anal_reg (io.mem_index), R_REG_TYPE_GPR);
	}
	return ret;
}

开发者ID:begoon，项目名称:radare2，代码行数:17，代码来源:anal_x86.c

示例7: reil_cmp

static int reil_cmp(RAnalEsil *esil) {
	RAnalReilInst *ins;
	char tmp_buf[REGBUFSZ];
	RAnalReilArg *op2, *op1;

	op2 = reil_pop_arg(esil);
	if (!op2) return false;
	op1 = reil_pop_arg(esil);
	if (!op1) {
		R_FREE (op2);
		return false;
	}

	ins = R_NEW0 (RAnalReilInst);
	if (!ins) {
		R_FREE (op1);
		R_FREE (op2);
		return false;
	}
	ins->opcode = REIL_EQ;
	ins->arg[0] = op2;
	ins->arg[1] = op1;
	ins->arg[2] = R_NEW0(RAnalReilArg);
	if (!ins->arg[2]) {
		reil_free_inst (ins);
		return false;
	}
	get_next_temp_reg(esil, tmp_buf);
	reil_make_arg(esil, ins->arg[2], tmp_buf);
	ins->arg[2]->size = 1;
	reil_print_inst(esil, ins);
	// Set vars needed to determine flags.
	snprintf(esil->Reil->cur, sizeof(esil->Reil->old) - 1, "%s:%d",
			ins->arg[2]->name, ins->arg[2]->size);
	snprintf(esil->Reil->old, sizeof(esil->Reil->cur) - 1, "%s:%d", op2->name,
			op2->size);

	if (r_reg_get(esil->anal->reg, op2->name, -1)) {
		esil->Reil->lastsz = op2->size;
	} else if (r_reg_get(esil->anal->reg, op1->name, -1)) {
		esil->Reil->lastsz = op1->size;
	}

	reil_push_arg(esil, ins->arg[2]);
	reil_free_inst(ins);
	return true;
}

开发者ID:dukebarman，项目名称:radare2，代码行数:47，代码来源:esil2reil.c

示例8: esil_get

static ut64 esil_get (RAnalEsil *e, const char *s) {
	RRegItem *item;
	// check for register
	if (!s) return 0LL;
	item = r_reg_get (e->anal->reg, s, 0); // GPR only wtf?
	if (item) return r_reg_get_value (e->anal->reg, item);
	return r_num_get (NULL, s);
}

开发者ID:djpohly，项目名称:radare2，代码行数:8，代码来源:esil.c

示例9: ios_hwstep_enable32

static void ios_hwstep_enable32 (RDebug *dbg, task_t port, int enable) {
	int i;
	static ARMDebugState32 olds;
	ARMDebugState32 ds;

	mach_msg_type_number_t count = ARM_DEBUG_STATE32_COUNT;
	(void) thread_get_state (port,
	  		ARM_DEBUG_STATE32,
			(thread_state_t)&ds,
			&count);

	//static ut64 chainstep = UT64_MAX;
	if (enable) {
		RIOBind *bio = &dbg->iob;
		ut32 pc = r_reg_get_value (dbg->reg,
		  r_reg_get (dbg->reg, "pc", R_REG_TYPE_GPR));
		ut32 cpsr = r_reg_get_value (dbg->reg,
		  r_reg_get (dbg->reg, "cpsr", R_REG_TYPE_GPR));

		for (i = 0; i < 16 ; i++) {
			ds.bcr[i] = ds.bvr[i] = 0;
		}
		olds = ds;
		//chainstep = UT64_MAX;
		// state = old_state;
		ds.bvr[i] = pc & (UT32_MAX >> 2) << 2;
		ds.bcr[i] = BCR_M_IMVA_MISMATCH | S_USER | BCR_ENABLE;
		if (cpsr & 0x20) {
			ut16 op;
			if (pc & 2) {
				ds.bcr[i] |= BAS_IMVA_2_3;
			} else {
				ds.bcr[i] |= BAS_IMVA_0_1;
			}
			/* check for thumb */
			bio->read_at (bio->io, pc, (void *)&op, 2);
			if (isThumb32 (op)) {
				eprintf ("Thumb32 chain stepping not supported yet\n");
				//chainstep = pc + 2;
			} else {
				ds.bcr[i] |= BAS_IMVA_ALL;
			}
		} else {
			ds.bcr[i] |= BAS_IMVA_ALL;
		}
	} else {

开发者ID:sparkhom，项目名称:radare2，代码行数:46，代码来源:xnu_debug.c

示例10: gb_write

int gb_write(emu *e, ut64 addr, ut8 *buf, ut32 len)
{
	if(0x2000 <= addr && addr < 0x4000) {
		if(buf[0] == 0x20 || buf[0] == 0x40 || buf[0] == 0x60)
			return r_reg_set_value(e->reg, r_reg_get(e->reg, "mbcrom", -1), 0);
		if(!buf[0])
			return r_reg_set_value(e->reg, r_reg_get(e->reg, "mbcrom", -1), 0);
		return r_reg_set_value(e->reg, r_reg_get(e->reg, "mbcrom", -1), buf[0]-1);
	}
	if(0x4000 <= addr && addr < 0x6000) {
		if(!buf[0])
			return r_reg_set_value(e->reg, r_reg_get(e->reg, "mbcram", -1), 0);
		return r_reg_set_value(e->reg, r_reg_get(e->reg, "mbcram", -1), buf[0]-1);
	}
	if(0xa000 <= addr && addr < 0xc000)
		return emu_write(e, addr + (r_reg_getv(e->reg, "mbcram") << 16), buf, len);
	return emu_write(e, addr, buf, len);
}

开发者ID:condret，项目名称:ramulate，代码行数:18，代码来源:gb.c

示例11: reg_write

int reg_write(RAnalEsil *esil, const char *regname, ut64 num) {
	RRegItem *reg = r_reg_get (esil->anal->reg, regname, -1);
	if (reg) {
		if (num)
			r_reg_set_value (esil->anal->reg, reg,num);
		return 1;
	}
	return 0;
}

开发者ID:andy737，项目名称:radare2-extras，代码行数:9，代码来源:anal_baleful.c

示例12: esil_set

static int esil_set (RAnalEsil *e, const char *s, ut64 n) {
	if (e->anal && e->anal->reg) {
		RRegItem *item;
		item = r_reg_get (e->anal->reg, s, 0); // GPR only wtf?
		eprintf ("SET (%p)\n", item);
		if (item) return r_reg_set_value (e->anal->reg, item, n);
	}
	return R_TRUE;
}

开发者ID:djpohly，项目名称:radare2，代码行数:9，代码来源:esil.c

示例13: reg_read

int reg_read(RAnalEsil *esil, const char *regname, ut64 *num) {
	RRegItem *reg = r_reg_get (esil->anal->reg, regname, -1);
	if (reg) {
		if (num)
			*num = r_reg_get_value (esil->anal->reg, reg);
		return 1;
	}
	return 0;
}

开发者ID:hotelzululima，项目名称:radare2-extras，代码行数:9，代码来源:anal_baleful.c

示例14: esil_internal_sizeof_reg

// Get size of a register.
static ut8 esil_internal_sizeof_reg(RAnalEsil *esil, const char *r) {
	RRegItem *i;
	if (!esil || !esil->anal || !esil->anal->reg || !r)
		return false;
	i = r_reg_get(esil->anal->reg, r, -1);
	if (!i)
		return false;
	return (ut8)i->size;
}

开发者ID:dukebarman，项目名称:radare2，代码行数:10，代码来源:esil2reil.c

示例15: i8051_reg_read

static ut32 i8051_reg_read (RReg *reg, const char *regname) {
	if (reg) {
		RRegItem *item = r_reg_get (reg, regname, R_REG_TYPE_GPR);
		if (item) {
			return r_reg_get_value (reg, item);
		}
	}
	return 0;
}

开发者ID:aronsky，项目名称:radare2，代码行数:9，代码来源:anal_8051.c

示例16: r_anal_cc_update

R_API boolt r_anal_cc_update (RAnal *anal, RAnalCC *cc, RAnalOp *op) {
	RRegItem *it;
	cc->off = op->addr;
	switch (op->type) {
	case R_ANAL_OP_TYPE_CALL:
	case R_ANAL_OP_TYPE_UCALL:
		cc->type = R_ANAL_CC_TYPE_STDCALL;
		// TODO: check if next instruction after call is restoring stack
		cc->jump = op->jump;
		return R_FALSE;
	case R_ANAL_OP_TYPE_SWI: // syscall
		cc->type = R_ANAL_CC_TYPE_FASTCALL;
		cc->off = op->jump;
		cc->jump = op->val; // syscall number
		return R_FALSE;
	case R_ANAL_OP_TYPE_XOR:
		if (op->src[0] && op->src[0]->reg && op->dst && op->dst->reg && op->dst->reg->name) {
			char *n1 = op->dst->reg->name;
			char *n2 = op->src[0]->reg->name;
			// XXX: must handle XOR operation properly
			// if n1 == n2 then set to 0
			if (!strcmp (n1, n2)) {
				it = r_reg_get (anal->reg, n1, R_REG_TYPE_GPR);
				r_reg_set_value (anal->reg, it, 0);
			}
		}
		return R_TRUE;
	case R_ANAL_OP_TYPE_MOV:
		if (op->dst && op->dst->reg) {
			it = r_reg_get (anal->reg, op->dst->reg->name, R_REG_TYPE_GPR);
			if (it && op->src[0])
				r_reg_set_value (anal->reg, it, op->src[0]->imm);
		}
		return R_TRUE;
	case R_ANAL_OP_TYPE_PUSH:
	case R_ANAL_OP_TYPE_UPUSH: // add argument
		cc->nargs ++;
		if (cc->nargs>0 && cc->nargs < R_ANAL_CC_ARGS)
			cc->args[cc->nargs] = op->val;
		return R_TRUE;
	}
	// must update internal stuff to recognize parm
	return R_TRUE;
}

开发者ID:17twenty，项目名称:radare2，代码行数:44，代码来源:cc.c

示例17: i8051_reg_write

static bool i8051_reg_write (RReg *reg, const char *regname, ut32 num) {
	if (reg) {
		RRegItem *item = r_reg_get (reg, regname, R_REG_TYPE_GPR);
		if (item) {
			r_reg_set_value (reg, item, num);
			return true;
		}
	}
	return false;
}

开发者ID:aronsky，项目名称:radare2，代码行数:10，代码来源:anal_8051.c

示例18: r_debug_continue_until

R_API int r_debug_continue_until(RDebug *dbg, ut64 addr) {
// TODO: use breakpoint+continue... more efficient
	RRegItem *ripc = r_reg_get (dbg->reg, dbg->reg->name[R_REG_NAME_PC], R_REG_TYPE_GPR);
	int n = 0;
	ut64 pc = r_reg_get_value (dbg->reg, ripc);
	while (pc != addr && !r_debug_is_dead (dbg)) {
		r_debug_step (dbg, 1);
		// TODO: obey breakpoints too?
	/* TODO: check if the debugger stops at the right address */
		pc = r_reg_get_value (dbg->reg, ripc);
		n++;
	}
	return n;
}

开发者ID:cephurs，项目名称:radare2，代码行数:14，代码来源:debug.c

示例19: gb_set_reg_profile

int gb_set_reg_profile(emu *e)
{
	int ret = r_anal_set_reg_profile (e->anal);
	e->reg = e->anal->reg;
	r_reg_set_value (e->reg, r_reg_get (e->reg,"mpc",-1), ((RBinAddr *) r_list_get_n (r_bin_get_entries (e->bin), 0))->offset);
	r_reg_set_value (e->reg, r_reg_get (e->reg,"sp",-1), 0xfffe);
	r_reg_set_value (e->reg, r_reg_get (e->reg,"af",-1), 0x01b0);
	r_reg_set_value (e->reg, r_reg_get (e->reg,"bc",-1), 0x0013);
	r_reg_set_value (e->reg, r_reg_get (e->reg,"de",-1), 0x00d8);
	r_reg_set_value (e->reg, r_reg_get (e->reg,"hl",-1), 0x014d);
	r_reg_set_value (e->reg, r_reg_get (e->reg,"ime",-1), R_TRUE);
	return ret;
}

开发者ID:condret，项目名称:ramulate，代码行数:13，代码来源:gb.c

示例20: esil_6502_init

static int esil_6502_init (RAnalEsil *esil) {
	if (esil->anal && esil->anal->reg) {		//initial values
		r_reg_set_value (esil->anal->reg, r_reg_get (esil->anal->reg, "pc", -1), 0x0000);
		r_reg_set_value (esil->anal->reg, r_reg_get (esil->anal->reg, "sp", -1), 0xff);
		r_reg_set_value (esil->anal->reg, r_reg_get (esil->anal->reg, "a", -1), 0x00);
		r_reg_set_value (esil->anal->reg, r_reg_get (esil->anal->reg, "x", -1), 0x00);
		r_reg_set_value (esil->anal->reg, r_reg_get (esil->anal->reg, "y", -1), 0x00);
		r_reg_set_value (esil->anal->reg, r_reg_get (esil->anal->reg, "flags", -1), 0x00);
	}
	return true;
}

开发者ID:Dev-Tech-Studio，项目名称:radare2，代码行数:11，代码来源:anal_6502.c

注：本文中的r_reg_get函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ r_sign函数代码示例发布时间：2022-05-30

C++ r_num_math函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17984|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9573|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8130|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8513|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8417|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9312|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8379|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7813|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8365|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7363|2022-11-06

客服电话

电子邮件

C++ r_reg_get函数代码示例

示例1: r_debug_execute

示例2: r_reg_get_value

示例3: r_debug_recoil

示例4: r_debug_recoil

示例5: r_reg_type_by_name

示例6: r_anal_value_new

示例7: reil_cmp

示例8: esil_get

示例9: ios_hwstep_enable32

示例10: gb_write

示例11: reg_write

示例12: esil_set

示例13: reg_read

示例14: esil_internal_sizeof_reg

示例15: i8051_reg_read

示例16: r_anal_cc_update

示例17: i8051_reg_write

示例18: r_debug_continue_until

示例19: gb_set_reg_profile

示例20: esil_6502_init

请发表评论

全部评论

上一篇：

下一篇：

opencost/opencost: Cross-cloud cost allo

Sazito/phoenix: A simple boilerplate tha

mokarakaya/spring-boot-multi-module-mave

用MATLAB对信号做频谱分析 - 逸阳

MiguelCatalan/MaterialSearchView: Cute l

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053