C++ rcvroff函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rcvroff函数的典型用法代码示例。如果您正苦于以下问题：C++ rcvroff函数的具体用法？C++ rcvroff怎么用？C++ rcvroff使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rcvroff函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: spinlock_pulse

 spinlock_pulse()
{
  power(v3,TODEV);
  delay(d1);
  rcvroff();
  txphase(v5);
  delay(rof1);
  xmtron();
  delay(pi);
  xmtroff();
  power(v4,TODEV);
  txphase(v6);
  delay(tph);
  xmtron();
  delay(pj);
  xmtroff();
  power(v3,TODEV);
  txphase(v7);
  delay(tph);
  xmtron();
  delay(pi);
  xmtroff();
  delay(rof2);
  rcvron();
  delay(tix);
}

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:26，代码来源:bp_image.c

示例2: pulsesequence

void pulsesequence()
{
    char pwpat[MAXSTR],p1pat[MAXSTR];
    /* equilibrium period */
    getstr("pwpat",pwpat);
    if (pwpat[0] == '\0') 
    {
      abort_message("no pwpat? ABORT");
    }
    getstr("p1pat",p1pat);
    if (p1pat[0] == '\0')
    {
      abort_message("no p1pat? ABORT");
    }
      
    status(A);
    obspower(zero);
    decpower(tpwr);
    hsdelay(d1);
    rcvroff();

    status(B);
      if (is_y(rfwg[1])) decshaped_pulse(p1pat,p1,zero,rof1,rof2);
      else apshaped_decpulse(p1pat,p1,zero,t1,t2,rof1,rof2);
      hsdelay(d2);
    status(C);
      if (is_y(rfwg[1])) decshaped_pulse(pwpat,pw,oph,rof1,rof2);
      else apshaped_decpulse(pwpat,pw,oph,t1,t2,rof1,rof2);
}

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:29，代码来源:ATdsh2pul.c

示例3: pulsesequence

pulsesequence()

{
      delay(d1);
      rcvroff();
      if (d3>4.5)
       dec4rgpulse(pw, oph, rof1, rof2);
      else
       {
        if (d3>3.5)
          dec3rgpulse(pw, oph, rof1, rof2);
        else
          dec2rgpulse(pw, oph, rof1, rof2);
       }        
}

开发者ID:OpenVnmrJ，项目名称:OpenVnmrJ，代码行数:15，代码来源:AT_lkdec.c

示例4: pulsesequence


//.........这里部分代码省略.........
    t1_counter = (int)((d2-d2_init)*sw1 + 0.5);
    
    if((t1_counter % 2)) 
    {
       tsadd(t1,2,4);     
       tsadd(t16,2,4);    
    }

    if( ix == 1) d3_init = d3 ;
    t2_counter = (int)((d3-d3_init)*sw2 + 0.5);
    if((t2_counter % 2)) 
    {
       tsadd(t2,2,4);  
       tsadd(t16,2,4);    
    }

    decstepsize(1.0);
    initval(phi_CO, v1);
    initval(phi_Ca, v2);

/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);
   	delay(d1-1.0e-3);
    obsoffset(tof);
    decoffset(dof);
    obspower(tpwr);        
    decpower(pwClvl);
    decpwrf(4095.0);
    dec2power(pwNlvl);
    txphase(zero);
    decphase(zero);
    dec2phase(zero);
    rcvroff();

    if(gt6 > 0.2e-6)
    {
       delay(10.0e-6);
       decrgpulse(pwC, zero, 1.0e-6, 1.0e-6);
       delay(0.2e-6);
       zgradpulse(gzlvl6, gt6);
    }  
    decpwrf(dfCa180); 
    delay(1.0e-3);

    rgpulse(pw,zero,1.0e-6,1.0e-6);            
    delay(2.0e-6);
    zgradpulse(gzlvl0,gt0);  
    delay(taua - gt0 - 2.0e-6 - WFG_START_DELAY);

    simshaped_pulse("","offC17",2.0*pw,pwCa180,zero,zero,1.0e-6,1.0e-6);
      /* c13 offset on CO, slp 180 on Ca */
    delay(taua - gt0 - 500.0e-6 - WFG_STOP_DELAY);
    zgradpulse(gzlvl0,gt0); 
    txphase(one);
    delay(500.0e-6);
    rgpulse(pw, one, 1.0e-6, 1.0e-6);
    decphase(zero);
  
    delay(2.0e-6);
    zgradpulse(gzlvl3,gt3);

    obspower(tpwrHd);
    decpwrf(dfCa90);
    delay(200.0e-6);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:66，代码来源:ghca_co_canhA.c

示例5: pulsesequence


//.........这里部分代码省略.........

   if ((dutycycle < 0.8) || (dm[0] == 'y'))
   {
      fprintf(stdout, "Duty cycle is %5.2f%%.\n", (1.0 - dutycycle) * 100.0);
      fprintf(stdout, "ABORT! The duty cycle must be less than 20%%.\n");
      psg_abort(1);
   }
  
/*begin pulse sequence*/

   if (xpol[0] == 'n') 
   {			

      settable(t1,4,table1);
      settable(t3,4,table3);
      settable(t4,4,table4);

      status(A);
      setreceiver(t1);
      obs_pw_ovr(TRUE);
      dec_pw_ovr(TRUE);       
      declvloff();
      decpwrf(dipolr);
      obspwrf(tpwrm);
      delay(d1);
 
      if(p180 > 0.0)               
      {
         decoff();
         if (dm[1] == 'y') decon();
	 rgpulse(p180, zero, rof1, 0.0);
	 delay(d2);
      }
      rcvroff();  
      rgpulse(pw, t1,rof1, 0.0);
      decoff();
      if (dm[2] == 'y') decon();
   }
    
   else
   {

      settable(t1,4,table1);
      settable(t2,4,table2);
      settable(t3,4,table3);
      settable(t4,4,table4);

      status(A);
      setreceiver(t1);
      obs_pw_ovr(TRUE);
      dec_pw_ovr(TRUE);
      declvloff();
      decpwrf(crossp);
      obspwrf(tpwrm);
      txphase(t3);
      delay(d1);

      if(p180 > 0.0)             
      {
         decrgpulse(p180, zero, rof1, 0.0);
	 delay(d2);
      }

      rcvroff();
      decphase(t2);
      delay(rof1);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:xpolar1.c

示例6: pulsesequence


//.........这里部分代码省略.........
	else {  if (phase2 == 2)  {tsadd(t8,1,4); }
              }
	 }



/*  Set up f2180  */

    tau2 = d3;    /* run 2D exp for NH correlation, but must use tau2 instead of tau1
                     because bionmr.h is written for nh_evol* to do tau2 evolution*/

    if((f2180[A] == 'y') && (ni2 > 1.0))  /* use f2180 to control tau2 */
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;



/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw1 + 0.5 );
   if(t2_counter % 2)
        { tsadd(t8,2,4); tsadd(t12,2,4);  tsadd(t13,2,4);  }




/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
      if (dm3[B]=='y') lk_hold();

	rcvroff();
        set_c13offset("cab");
	obsoffset(tof);
	obspower(tpwr);
 	obspwrf(4095.0);
	decpower(pwClvl);
	decpwrf(4095.0);
 	dec2power(pwNlvl);
	txphase(one);
	delay(1.0e-5);
        if (TROSY[A] == 'n')
	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(gstab);
      if (TROSY[A] == 'n')
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(gstab);

      if(dm3[B] == 'y')			  /*optional 2H decoupling on */
         {dec3unblank(); dec3rgpulse(1/dmf3, one, 0.0, 0.0); 
          dec3unblank(); setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);} 
        rgpulse(pw, zero, 2.0e-6, 0.0);
        zgradpulse(gzlvl5, gt5);
        delay(tauCH - gt5 - WFG2_START_DELAY - 0.5e-3 + 68.0e-6 );

        sim_c13adiab_inv_pulse("", "aliph", stCwidth, "sech1", 2.0*pw, 1.0e-3,
                                                  zero, zero, 2.0e-6, 2.0e-6);

        zgradpulse(gzlvl5, gt5);
        delay(tauCH - gt5 - 0.5e-3 + 68.0e-6);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:hadamac.c

示例7: pulsesequence


//.........这里部分代码省略.........
     rgpulse(dly_pg1/1.62,one,20.0e-6,20.0e-6);
     obspower(tsatpwr);

  }

   if (fsat[0] == 'y')
   {
	delay(2.0e-5);
        rgpulse(d1,zero,20.0e-6,20.0e-6);
   	obspower(tpwr);      /* Set transmitter power for hard 1H pulses */
	delay(2.0e-5);
	if(fscuba[0] == 'y')
	{
		delay(2.2e-2);
		rgpulse(pw,zero,2.0e-6,0.0);
		rgpulse(2*pw,one,2.0e-6,0.0);
		rgpulse(pw,zero,2.0e-6,0.0);
		delay(2.2e-2);
	}
   }
   else
   {
    delay(d1);
   }

   obspower(tpwr);           /* Set transmitter power for hard 1H pulses */
   txphase(zero);
   dec2phase(zero);
   decphase(zero);
   delay(1.0e-5);

/* Begin Pulses */

   rcvroff();
   delay(10.0e-6);

/* first ensure that magnetization does infact start on H and not C */

   decrgpulse(pwC,zero,2.0e-6,2.0e-6);

   delay(2.0e-6);
   zgradpulse(gzlvl0,gt0);
   delay(gstab);


/* this is the real start */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(2.0e-6);
   zgradpulse(gzlvl1,gt1);
   delay(2.0e-6);

   delay(taua - gt1 - 4.0e-6);   /* taua <= 1/4JCH */                          

   simpulse(2*pw,2*pwC,zero,zero,0.0,0.0);

   txphase(t1);

   delay(2.0e-6);
   zgradpulse(gzlvl1,gt1);
   delay(2.0e-6);

   delay(taua - gt1 - 4.0e-6); 

   rgpulse(pw,t1,0.0,0.0);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:hbcbcgcdhdA.c

示例8: pulsesequence

pulsesequence()
{
  double gzlvl1,
         gt1,
         gzlvl3,
         gt3,
         gstab,
	 pwx2lvl,
	 pwx2,
	 tau,
	 gtau,
	 hsglvl,
	 hsgt;
  char   nullflg[MAXSTR],
	 sspul[MAXSTR];
  int    iphase,
         icosel;

  gzlvl1 = getval("gzlvl1");
  gt1 = getval("gt1");
  gzlvl3 = getval("gzlvl3");
  gt3 = getval("gt3");
  pwx2lvl = getval("pwx2lvl");
  pwx2 = getval("pwx2");
  hsglvl = getval("hsglvl");
  hsgt = getval("hsgt");
  gstab = getval("gstab");
  getstr("nullflg",nullflg);
  getstr("sspul",sspul);
  iphase = (int)(getval("phase")+0.5);
  icosel = 1;
  tau = 1/(2*(getval("j1xh")));
  gtau =  2*gstab + GRADIENT_DELAY;

  if (tau < (gt3+gstab))
  {
    text_error("tau must be greater than gt3+gstab\n");
    psg_abort(1);
  }

  settable(t1,2,ph1);
  settable(t2,4,ph2);
  settable(t3,4,ph3);

  assign(zero,v4);
  getelem(t1,ct,v1);
  getelem(t3,ct,oph);

  if (iphase == 2)
	icosel = -1;

  initval(2.0*(double)((int)(d2*getval("sw1")+0.5)%2),v10); 
  add(v1,v10,v1);
  add(v4,v10,v4);
  add(oph,v10,oph);

  status(A);
     dec2power(pwx2lvl);

     if (sspul[0] == 'y')
     {
        zgradpulse(hsglvl,hsgt);
        rgpulse(pw,zero,rof1,rof1);
        zgradpulse(hsglvl,hsgt);
     }

     delay(d1);

  status(B);

     rcvroff();
     if (nullflg[0] == 'y')
     {
        rgpulse(0.5*pw,zero,rof1,rof1);
        delay(tau);
        sim3pulse(2.0*pw,0.0,2.0*pwx2,zero,zero,zero,rof1,rof1);
        delay(tau);
        rgpulse(1.5*pw,two,rof1,rof1);
        zgradpulse(hsglvl,hsgt);
        delay(1e-3);
     }

     rgpulse(pw,zero,rof1,rof1);
     delay(tau - rof1 - (2*pw/PI));

     dec2rgpulse(pwx2,v1,rof1,1.0e-6);
     delay(gt1+gtau - (2*pwx2/PI) - pwx2 - 1.0e-6 - rof1);
     dec2rgpulse(2*pwx2,v4,rof1,1.0e-6);
     delay(gstab - pwx2 - 1.0e-6);
     zgradpulse(gzlvl1,gt1);
     delay(gstab - rof1 - pw);
     delay(d2/2);
     rgpulse(2.0*pw,zero,rof1,rof1);
     delay(d2/2);

     delay(gstab - rof1 - pw);
     zgradpulse(gzlvl1,gt1);
     delay(gstab - pwx2 - rof1);
     dec2rgpulse(2*pwx2,zero,rof1,1.0e-6);
     delay(gt1+gtau - (2*pwx2/PI) - pwx2 - 1.0e-6 - rof1);
//.........这里部分代码省略.........

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:101，代码来源:gHMQC_d2.c

示例9: pulsesequence


//.........这里部分代码省略.........
   dec2power(pwNlvl);      /* Set Dec2 power for 15N hard pulses         */

/* Presaturation Period */

   if (fsat[0] == 'y')
     {
      delay(2.0e-5);
      rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
      obspower(tpwr);      /* Set transmitter power for hard 1H pulses */
      delay(2.0e-5);
      if (fscuba[0] == 'y')
        {
         delay(2.2e-2);
         rgpulse(pw,zero,2.0e-6,0.0);
         rgpulse(2*pw,one,2.0e-6,0.0);
         rgpulse(pw,zero,2.0e-6,0.0);
         delay(2.2e-2);
        }
     }
    else
     {
      delay(d1);
     }

   obspower(tpwr);           /* Set transmitter power for hard 1H pulses */
   txphase(zero);
   dec2phase(zero);
   delay(1.0e-5);

/* Begin Pulses */

status(B);

   rcvroff();
   lk_hold();
   delay(20.0e-6);

   initval(1.0,v2);
   obsstepsize(phase_sl);
   xmtrphase(v2);

   /* shaped pulse */
   obspower(tpwrsl);
   shaped_pulse(shp_sl,pw_sl,one,4.0e-6,0.0);
   xmtrphase(zero);
   obspower(tpwr);  txphase(zero);  
   delay(4.0e-6);
   /* shaped pulse */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(0.2e-6);
   zgradpulse(gzlvl5,gt5);
   delay(2.0e-6);

   delay(taua - gt5 - 2.2e-6);   /* taua <= 1/4JNH */ 

   sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);

   txphase(three); dec2phase(zero); decphase(zero); 

   delay(0.2e-6);
   zgradpulse(gzlvl5,gt5);
   delay(200.0e-6);

   delay(taua - gt5 - 200.2e-6 - 2.0e-6);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:ghncoca_sim_trosy_4DA.c

示例10: pulsesequence


//.........这里部分代码省略.........
/*  Set up f1180  */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }


/*  Set up f2180  */

    tau2 = d3;
    if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;


/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(zero);
   	delay(1.0e-5);

	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);
    txphase(zero);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:66，代码来源:ghn_coco.c

示例11: pulsesequence


//.........这里部分代码省略.........
  t1_counter = (int) ((d2 - d2_init) * sw1 + 0.5);
  if (t1_counter % 2)
  {
    tsadd(t3, 2, 4);
    tsadd(t11, 2, 4);
  }

  if (ix == 1)
    d3_init = d3;
  t2_counter = (int) ((d3 - d3_init) * sw2 + 0.5);
  if (t2_counter % 2)
  {
    tsadd(t5, 2, 4);
    tsadd(t11, 2, 4);
  }



  /*   BEGIN PULSE SEQUENCE   */

  status(A);
  if (dm3[B] == 'y')
    lk_sample();
  if ((ni / sw1 - d2) > 0)
    delay(ni / sw1 - d2);	/*decreases as t1 increases for const.heating */
  if ((ni2 / sw2 - d3) > 0)
    delay(ni2 / sw2 - d3);	/*decreases as t2 increases for const.heating */
  delay(d1);
  if (dm3[B] == 'y')
  {
    lk_hold();
    lk_sampling_off();
  }				/*freezes z0 correction, stops lock pulsing */
  rcvroff();

  obspower(tpwr);
  decpower(pwClvl);
  dec2power(pwNlvl);
  decpwrf(rf0);
  obsoffset(tof);
  txphase(t3);
  delay(1.0e-5);

  decrgpulse(pwC, zero, 0.0, 0.0);	/*destroy C13 magnetization */
  zgradpulse(gzlvl0, 0.5e-3);
  delay(1.0e-4);
  decrgpulse(pwC, one, 0.0, 0.0);
  zgradpulse(0.7 * gzlvl0, 0.5e-3);
  delay(5.0e-4);

  if (dm3[B] == 'y')		/* begins optional 2H decoupling */
  {
    dec3rgpulse(1 / dmf3, one, 10.0e-6, 2.0e-6);
    dec3unblank();
    dec3phase(zero);
    delay(2.0e-6);
    setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
  }

  rgpulse(pw, t3, 0.0, 0.0);	/* 1H pulse excitation */
  zgradpulse(gzlvl0, gt0);	/* 2.0*GRADIENT_DELAY */
  decphase(zero);
  delay(taua + tau1 - gt0 - 2.0 * GRADIENT_DELAY - 2.0 * pwC);
  decrgpulse(2.0 * pwC, zero, 0.0, 0.0);
  txphase(zero);
  delay(tau1);

开发者ID:timburrow，项目名称:ovj3，代码行数:67，代码来源:hcch_tocsy_new.c

示例12: pulsesequence


//.........这里部分代码省略.........
/* Calculate modifications to phases for States-TPPI acquisition          */
  if( ix == 1) d2_init = d2;

	t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );

  if(t1_counter % 2) 
   {
	tsadd(t1,2,4);
	tsadd(t4,2,4);
	tsadd(t5,2,4);
	tsadd(t11,2,4);
   }

/* Calculate modifications to phases for States-TPPI acquisition          */
  if( ix == 1) d3_init = d3;

	t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );

/* BEGIN PULSE SEQUENCE */

status(A);
        dofa = dof - 35.0*dfrq; /*start at C2' */
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	obsoffset(tof);
	decoffset(dofa);
	dec2offset(dof2);
	txphase(zero);
	decphase(zero);
        dec2phase(zero);

	delay(d1);
        rcvroff();

status(B);

	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(gstab/2);
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, one, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(calH*pw,zero,0.0,0.0);                 /* 1H pulse excitation */
   	decphase(t4);
        delay(2.0*lambda);
        decrgpulse(calC*pwC, t4, 0.0, 0.0);
	zgradpulse(gzlvl3, gt3);
	obspower(pwH_Sel_lvl);
   	decphase(zero);
        delay(taucc -lambda - gt3 - WFG2_START_DELAY - pwH_Sel_pw/2.0 + 70.0e-6);

        shaped_pulse(pwH_Sel_Shape, pwH_Sel_pw, zero, 0.0, 0.0);
        delay(lambda - pwH_Sel_pw/2.5);

        decrgpulse(2.0*pwC, t1, 0.0, 0.0);

        zgradpulse(gzlvl3, gt3);
	obspower(tpwr);
   	decphase(t5);
   	txphase(t2);
        delay(taucc - gt3);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:66，代码来源:rna_cchcosy_CCdec.c

示例13: pulsesequence


//.........这里部分代码省略.........
status(A);
   rlpower(tsatpwr,TODEV);       /* Set transmitter power for 1H presaturation */
   rlpower(dhpwr,DODEV);         /* Set Dec1 power for 13C pulses          */
   rlpower(dhpwr2,DO2DEV);       /* Set Dec2 power for 15N pulses       */
   obsoffset(tof);
/* Presaturation Period */
status(B);
   if (fsat[0] == 'y')
   {
          delay(2.0e-5);
          rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
          rlpower(tpwr,TODEV);    /* Set transmitter power for hard 1H pulses */
          delay(2.0e-5);
          if(fscuba[0] == 'y')
          {
                  delay(2.2e-2);
                  rgpulse(pw,zero,2.0e-6,0.0);
                  rgpulse(2*pw,one,2.0e-6,0.0);
                  rgpulse(pw,zero,2.0e-6,0.0);
                  delay(2.2e-2);
          }
   }
   else
   {
     delay(d1);
   }
   rlpower(tpwr,TODEV);               /* Set transmitter power for 1H CPMG pulses */
   txphase(zero);
   dec2phase(zero);
   decphase(zero);
   delay(1.0e-5);
/* Begin Pulses */
status(C);
   rcvroff();
   delay(20.0e-6);
   decrgpulse(pwc,zero,4.0e-6,0.0);
delay(2.0e-6);
rgradient('z',gzlvl1);
delay(gt1);
rgradient('z',0.0);
delay(250.0e-6);
rgpulse(pw,zero,0.0,0.0);
decpower(d_reb);
delay(2.0e-6);
rgradient('z',gzlvl2);
delay(gt2);
rgradient('z',0.0);
delay(150.0e-6);
if(filter_flg[A] == 'y')
   delay(taua - POWER_DELAY - gt2 - 152e-6
     - WFG2_START_DELAY - 0.5*pwc_reb - 4.0/PI*pw);
else
   delay(taua - POWER_DELAY - gt2 - 152e-6
     - WFG2_START_DELAY - 0.5*pwc_reb);
simshaped_pulse("hard",sh_reb,2.0*pw,pwc_reb,zero,zero,0.0,0.0);
txphase(one);
decpower(dhpwr);
decphase(t4);
delay(taua - 0.5*pwc_reb - WFG2_STOP_DELAY - POWER_DELAY - gt2 - 152e-6 );
delay(2.0e-6);
rgradient('z',gzlvl2);
delay(gt2);
rgradient('z',0.0);
delay(150.0e-6);
if(filter_flg[A] == 'n')
  rgpulse(pw,one,0.0,0.0);

开发者ID:NMRWIKI，项目名称:psdb，代码行数:67，代码来源:Ha_SQ_exchange_lek_600_GLY.c

示例14: pulsesequence


//.........这里部分代码省略.........
/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t1,2,4); tsadd(t4,2,4); }

	kappa = tCN>ni/sw1? 1:tCN/(ni/sw1);
	kappa = ((double)((int)(kappa*1000)))/1000; 
       /* 3 digits after the point, may cause a small decrease in value for safe boundary */

	printf("kappa = %f\n", kappa);

/* BEGIN PULSE SEQUENCE */

status(A);

	obspower(tpwr);
	decpower(pwClvl);
	decpwrf(rf0);
 	dec2power(pwNlvl);
	txphase(zero);
        decphase(zero);
        dec2phase(zero);

	delay(d1);

 
/*  xxxxxxxxxxxxxxxxx  CONSTANT SAMPLE HEATING FROM N15 RF xxxxxxxxxxxxxxxxx  */

 

/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
    rcvroff();

	/*dec2rgpulse(pwN, zero, 0.0, 0.0); */  /*destroy N15 magnetization*/
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);

	/*dec2rgpulse(pwN, one, 0.0, 0.0); */
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	txphase(t1);
	delay(5.0e-4);

 
   	rgpulse(pw,zero,0.0,0.0);                 /* 1H pulse excitation */

	txphase(zero);
   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, three, 0.0, 0.0);
	txphase(two);

         obspower(tpwrs+6.0);
           obspwrf(tpwrsf_n);
   	   shaped_pulse("H2Osinc_n", pwHs, zero, 5.0e-5, 0.0);
	 obspower(tpwr); obspwrf(4095.0);

开发者ID:OpenVnmrJ，项目名称:OpenVnmrJ，代码行数:66，代码来源:COfiltered_TROSYnietl_sCT.c

示例15: pulsesequence


//.........这里部分代码省略.........

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2)
        { tsadd(t1,2,4); tsadd(t14,2,4); tsadd(t15,2,4);tsadd(t24,2,4); tsadd(t25,2,4);  }

  if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2)
        { tsadd(t2,2,4); tsadd(t14,2,4); tsadd(t15,2,4);tsadd(t24,2,4); tsadd(t25,2,4);  }


/* Set up CONSTANT/SEMI-CONSTANT time evolution in N15 */

   if (ni2 > 1)
   {
   halfT2 = 0.5*(ni2-1)/sw2;
   t2b = (double) t2_counter*((halfT2 - timeTN)/((double)(ni2-1)));
   if( ix==1 && halfT2 - timeTN > 0 ) printf("SCT mode on, max ni2=%g\n",timeTN*sw2*2+1);
    if(t2b < 0.0) t2b = 0.0;
   
    t2a = timeTN - tau2*0.5 + t2b;
    if(t2a < 0.2e-6)  t2a = 0.0;
    }
    else
    {
    t2b = 0.0;
    t2a = timeTN - tau2*0.5;
    }



   status(A);
      rcvroff();  

   decpower(pwClvl);
   decoffset(dof);
   dec2power(pwNlvl);
   dec2offset(dof2);
   obspwrf(tpwrsf);
   decpwrf(4095.0);
   obsoffset(tof);
   set_c13offset("co");


      dec2rgpulse(pwN*2.0,zero,0.0,0.0);
     zgradpulse(1.5*gzlvl4, gt4);
       delay(1.0e-4);

lk_sample();
       delay(d1-gt4);
lk_hold();
        h_shapedpulse("pc9f",shbw,shofs,zero, 2.0e-6, 0.0);

        delay(lambda-pwS5*0.5-pwS6*0.5);

        h_sim3shapedpulse("reburp",shbw,shofs,0.0,2.0*pwN, one, zero, zero, 0.0, 0.0);

        delay(lambda-pwS5*0.5-pwS6*0.5);

   if(n15_flg[0]=='y') h_shapedpulse("pc9f_",shbw,shofs,three, 0.0, 0.0);
     else h_shapedpulse("pc9f_",shbw,shofs,one, 0.0, 0.0);


   obspower(shlvl1);
/**************************************************************************/

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:best_trosy_hnco.c

示例16: pulsesequence


//.........这里部分代码省略.........
                             zero, zero, zero, 2.0e-6, 0.0);
   set_c13offset("co");		/* set Dec1 carrier at Co		      */

/* Presaturation Period */

   if (satmode[0] == 'y')
   {
	delay(2.0e-5);
        rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
   	obspower(tpwr);      /* Set transmitter power for hard 1H pulses */
	delay(2.0e-5);
	if(fscuba[0] == 'y')
	{
		delay(2.2e-2);
		rgpulse(pw,zero,2.0e-6,0.0);
		rgpulse(2*pw,one,2.0e-6,0.0);
		rgpulse(pw,zero,2.0e-6,0.0);
		delay(2.2e-2);
	}
   }
   else
   {
    delay(d1);
   }
   obspower(tpwr);           /* Set transmitter power for hard 1H pulses */
   txphase(one);
   dec2phase(zero);
   delay(1.0e-5);

/* Begin Pulses */

status(B);

   rcvroff();
   lk_hold();

   shiftedpulse("sinc", pwHs, 90.0, 0.0, one, 2.0e-6, 0.0);
   txphase(zero);
   delay(2.0e-6);


/*   xxxxxxxxxxxxxxxxxxxxxx    1HN to 15N TRANSFER   xxxxxxxxxxxxxxxxxx    */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(0.2e-6);
   zgradpulse(gzlvl1, gt1);
   delay(2.0e-6);

   delay(taua - gt1 - 2.2e-6);   /* taua <= 1/4JNH */ 

   sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,0.0,0.0);

   txphase(three); dec2phase(zero); decphase(zero); 

   delay(taua - gt1 - gstab -0.2e-6 - 2.0e-6);

   delay(0.2e-6);
   zgradpulse(gzlvl1, gt1);
   delay(gstab);

/*   xxxxxxxxxxxxxxxxxxxxxx    15N to 13CO TRANSFER   xxxxxxxxxxxxxxxxxx    */

   if(sel_flg[A] == 'n') {

   rgpulse(pw,three,2.0e-6,0.0);

开发者ID:OpenVnmrJ，项目名称:OpenVnmrJ，代码行数:67，代码来源:PR42_ghn_co_caP_TROSY.c

示例17: pulsesequence

pulsesequence() {

// Set the Maximum Dynamic Table and v-var Numbers

   settablenumber(10);
   setvvarnumber(30);

// Define Variables and Objects and Get Parameter Values

   double aXprep1 = getval("aXprep1");  // Define Tilted Pulses using "prep1X".
   double pw1Xprep1 = getval("pw1Xprep1");
   double pw2Xprep1 = getval("pw2Xprep1");
   double phXprep1 = getval("phXprep1");

   WMPA wpmlg = getwpmlg("wpmlgX");
   strncpy(wpmlg.ch,"obs",3); 
   putCmd("chXwpmlg='obs'\n");

//--------------------------------------
// Copy Current Parameters to Processed
//-------------------------------------

   putCmd("groupcopy('current','processed','acquisition')");

// Dutycycle Protection

   DUTY d = init_dutycycle();
   d.dutyon = getval("pw1Xprep1") + getval("pw2Xprep1") + 2.0*wpmlg.q*wpmlg.cycles*wpmlg.pw;
   d.dutyoff = d1 + 4.0e-6 + 5.0e-6 + wpmlg.r1 + wpmlg.r2 + 
               at - 2.0*wpmlg.q*wpmlg.cycles*wpmlg.pw;
   d = update_dutycycle(d);
   abort_dutycycle(d,10.0);

// Set Phase Tables

   settable(ph1Xprep1,4,table1);
   settable(ph2Xprep1,4,table2);
   settable(phXwpmlg,4,table3);
   settable(phRec,4,table4);
   setreceiver(phRec);

// Set the Small-Angle Step

   double obsstep = 360.0/(PSD*8192);
   obsstepsize(obsstep);
   int phfXprep1 = initphase(phXprep1, obsstep);
   int phXzero = initphase(0.0, obsstep);

// Begin Sequence

   xmtrphase(phfXprep1); txphase(ph1Xprep1);
   obspwrf(aXprep1);
   obsunblank(); decunblank(); _unblank34();
   delay(d1);
   sp1on(); delay(2.0e-6); sp1off(); delay(2.0e-6);

// Tilted Preparation Pulse for FSLG or PMLG "prep1X"

   startacq(5.0e-6);
   rcvroff();
   delay(wpmlg.r1);
   rgpulse(pw1Xprep1, ph1Xprep1, 0.0, 0.0);
   rgpulse(pw2Xprep1, ph2Xprep1, 0.0, 0.0);
   xmtrphase(phXzero);
   delay(wpmlg.r2);

// Apply WPMLG Cycles

   decblank(); _blank34();
   _wpmlg(wpmlg, phXwpmlg);
   endacq();
   obsunblank(); decunblank(); _unblank34();
}

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:73，代码来源:wpmlg1d.c

示例18: pulsesequence


//.........这里部分代码省略.........
      settable(t5, 8, rec); } 

      if ( phase1 == 2 )                  /* Hypercomplex in t1 */
      { if (TROSY[A] == 'y')          
        { tsadd(t3, 2, 4); tsadd(t5, 2, 4); }                      
        else tsadd(t2, 1, 4); }
                                   
    if(t1_counter %2)          /* calculate modification to phases based on */
    { tsadd(t2,2,4); tsadd(t5,2,4); tsadd(t6,2,4); }   /* current t1 values */

    if(wtg3919[0] != 'y') 
    { add(one,v7,v7); add(one,v8,v8); }
         
                           /* sequence starts!! */
   status(A);
     
     obspower(tpwr);
     dec2power(pwNlvl);
     decpower(pwClvl);
     decpwrf(rfst);
     if(Hdecflg[0] != 'n')
     {
       delay(5.0e-5);
       rgpulse(pw,zero,rof1,0.0);                 
       rgpulse(pw,one,0.0,rof1);                 
       zgradpulse(1.5*gzlvl3, 0.5e-3);
       delay(5.0e-4);
       rgpulse(pw,zero,rof1,0.0);                 
       rgpulse(pw,one,0.0,rof1);                 
       zgradpulse(-gzlvl3, 0.5e-3);
     }
     
     delay(d1);
     rcvroff();
     
   status(B);

     rgpulse(pw, zero, rof1, rof1);
     
     zgradpulse(0.3*gzlvl3,gt3);
     txphase(zero);
     dec2phase(zero);
     delay(tauxh-gt3);               /* delay=1/4J(XH)   */

     sim3pulse(2*pw,0.0,2*pwN,t4,zero,zero,rof1,rof1);

     zgradpulse(0.3*gzlvl3,gt3);
     dec2phase(t2);
     delay(tauxh-gt3 );               /* delay=1/4J(XH)   */
  
     rgpulse(pw, t1, rof1, rof1);

     zgradpulse(0.5*gsign*ihh*gzlvl3,gt3);
     delay(200.0e-6); 
     decphase(zero);
            
     if (TROSY[A] == 'y')
     { 
       txphase(t3);       
       if ( phase1 == 2 ) 
         dec2rgpulse(pwN, t6, rof1, 0.0);
       else 
         dec2rgpulse(pwN, t2, rof1, 0.0);              
       if ( (C13refoc[A]=='y') && (d2 > 1.0e-3 + 2.0*WFG2_START_DELAY) )
       {
         delay(d2/2.0 - 0.5e-3 - WFG2_START_DELAY);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:gNfhsqcHDA.c

示例19: pulsesequence


//.........这里部分代码省略.........

 if(phase1==2) tsadd(t21,1,4);
 if(phase2==2) tsadd(t12,1,4);
 
 if(d2_index%2)
 {
	tsadd(t21,2,4);
	tsadd(t10,2,4);
 }
 if(d3_index%2)
 {
	tsadd(t12,2,4);
	tsadd(t10,2,4);
 }


/* BEGIN ACTUAL PULSE SEQUENCE */


status(A);
   if (satmode[A] == 'y')
   {
	if(satmove)
		obsoffset(satfrq);
	obspower(satpwr);
    	rgpulse(d1,zero,rof1,rof1);
	if(satmove)
		obsoffset(tof);
   }
   else
   {
    	delay(d1);
   }
   rcvroff();
   decphase(t13);
   obspower(tpwr);   /* Set transmitter power for hard 1H pulses */
   decpower(pwcalvl);
status(B);
   rgpulse(pw,t21,1.0e-5,0.0);                /* First 1H 90 degree pulse     */
   txphase(t11);
   if(tau1 < (2*pwca + pw))	/* first t1-value */
   {
	delay(tauhc - 2*pwca - 1.0e-6);  /* assuming pwca > pw */
     	decrgpulse(pwca,t13,0.0,0.0); /* 13C composite 180 deg pulse  */
	simpulse(2*pw, 2*pwca,t11, t14, 1.0e-6, 0.0);
     	decrgpulse(pwca,t13,1.0e-6,0.0); /* 13C composite 180 deg pulse  */
	txphase(one);
	decphase(t12);
	delay(tauhc - 2*pwca - 1.0e-6);  /* assuming pwca > pw */
   }
   else
   {
	delay(tauhc + tau1/2 - 2*pwca -1.0e-6); /* t1-evol. plus pol. trans. */
     	decrgpulse(pwca,t13,0.0,0.0); /* 13C composite 180 deg pulse  */
     	decrgpulse(2*pwca,t14,1.0e-6,0.0); /* 13C composite 180 deg pulse  */
     	decrgpulse(pwca,t13,0.0,0.0); /* 13C composite 180 deg pulse  */
	delay(tau1/2 - 2*pwca - pw);       /* continued t1-evol. */
        rgpulse(2*pw,t11,0.0,0.0);      /* proton echo pulse */
	txphase(one);
	decphase(t12);
	delay(tauhc - pw);
   }

   simpulse(pw,pwca,one,t12,1.0e-6,0.2e-6);
	decphase(zero);
      	decpower(pwcolvl);

开发者ID:DanIverson，项目名称:OpenVnmrJ，代码行数:67，代码来源:hcchtocsy.c

示例20: pulsesequence


//.........这里部分代码省略.........
        obsoffset(tofps);
	delay(2.0e-5);
        rgpulse(d1,zero,2.0e-6,2.0e-6);  /* presat with transmitter */
   	obspower(tpwr);      /* Set transmitter power for hard 1H pulses */
	delay(2.0e-5);
	if(fscuba[0] == 'y')
	{
		delay(2.2e-2);
		rgpulse(pw,zero,2.0e-6,0.0);
		rgpulse(2.0*pw,one,2.0e-6,0.0);
		rgpulse(pw,zero,2.0e-6,0.0);
		delay(2.2e-2);
	}
   }
   else
   {
    delay(d1);
   }
   obspower(tpwr);           /* Set transmitter power for hard 1H pulses */
   obsoffset(tof);
   txphase(t1);
   decphase(zero);
   dec2phase(zero);
   delay(1.0e-5);

/* Begin Pulses */

status(C);

   decoffset(dof_me);

   lk_hold();

   rcvroff();
   delay(20.0e-6);

/* ensure that magnetization originates on 1H and not 13C */

   if(dtt_flg[A] == 'y') {
     obsoffset(tof_dtt);
     obspower(tpwrs1);
     shaped_pulse("H2Osinc",pwHs1,zero,10.0e-6,0.0);
     obspower(tpwr);

     obsoffset(tof); 
   }
 
   decrgpulse(pwC,zero,0.0,0.0);
 
   zgradpulse(gzlvl0,gt0);
   delay(gstab);

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   zgradpulse(gzlvl1,gt1);
   delay(gstab);

   delay(taua - gt1 -gstab); 

   simpulse(2.0*pw,2.0*pwC,zero,zero,0.0,0.0);
   txphase(one);

   delay(taua - gt1 - gstab); 
   	
   zgradpulse(gzlvl1,gt1);
   delay(gstab);

开发者ID:timburrow，项目名称:OpenVnmrJ，代码行数:67，代码来源:hmcmcgcbcaA.c

注：本文中的rcvroff函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rd_byte函数代码示例发布时间：2022-05-30

C++ rcu_trace_sub_qlen函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17978|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9570|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8129|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8511|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8415|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9309|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8378|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7810|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8364|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7362|2022-11-06

客服电话

电子邮件

C++ rcvroff函数代码示例

示例1: spinlock_pulse

示例2: pulsesequence

示例3: pulsesequence

示例4: pulsesequence

示例5: pulsesequence

示例6: pulsesequence

示例7: pulsesequence

示例8: pulsesequence

示例9: pulsesequence

示例10: pulsesequence

示例11: pulsesequence

示例12: pulsesequence

示例13: pulsesequence

示例14: pulsesequence

示例15: pulsesequence

示例16: pulsesequence

示例17: pulsesequence

示例18: pulsesequence

示例19: pulsesequence

示例20: pulsesequence

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

sevenjay/cpp-markdown: Cpp-Markdown is a

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053