C++ readSocket函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中readSocket函数的典型用法代码示例。如果您正苦于以下问题：C++ readSocket函数的具体用法？C++ readSocket怎么用？C++ readSocket使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了readSocket函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: qDebug

//! [clientConnected]
void TennisServer::clientConnected()
{
    qDebug() << Q_FUNC_INFO << "connect";

    QBluetoothSocket *socket = l2capServer->nextPendingConnection();
    if (!socket)
        return;

    if(clientSocket){
        qDebug() << Q_FUNC_INFO << "Closing socket!";
        delete socket;
        return;
    }

    connect(socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    connect(socket, SIGNAL(disconnected()), this, SLOT(clientDisconnected()));
    connect(socket, SIGNAL(error(QBluetoothSocket::SocketError)), this, SLOT(socketError(QBluetoothSocket::SocketError)));

    stream = new QDataStream(socket);

    clientSocket = socket;    

    qDebug() << Q_FUNC_INFO << "started";

    emit clientConnected(clientSocket->peerName());
    lagTimer.start();
}

开发者ID:KDE，项目名称:android-qt-mobility，代码行数:28，代码来源:tennisserver.cpp

示例2: connect

void QServer::addToList(QLocalSocket* socket)
{
	//Store sockets & connect them for read & discard them on disconnect
	connection_list.push_back(socket);
	connect(socket, SIGNAL(readyRead()), this , SLOT(readSocket()));
	connect(socket, SIGNAL(disconnected()), this , SLOT(discardSocket()));
}

开发者ID:diepdtnse03145，项目名称:Qt-IPC-Server-Client，代码行数:7，代码来源:qserver.cpp

示例3: incomingConnection

void HttpServer :: incomingConnection(qintptr socketDescriptor)
{
  auto socket = new QTcpSocket (this);
  connect (socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
  connect (socket, SIGNAL(disconnected()), this, SLOT(disconnectSocket()));
  socket->setSocketDescriptor(socketDescriptor);
}

开发者ID:NanoSim，项目名称:Porto，代码行数:7，代码来源:httpserver.cpp

示例4: setMessage

void PingPong::clientConnected()
{
    //! [Initiating server socket]
    if (!m_serverInfo->hasPendingConnections()) {
        setMessage("FAIL: expected pending server connection");
        return;
    }
    socket = m_serverInfo->nextPendingConnection();
    if (!socket)
        return;
    socket->setParent(this);
    connect(socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    connect(socket, SIGNAL(disconnected()), this, SLOT(clientDisconnected()));
    connect(socket, SIGNAL(error(QBluetoothSocket::SocketError)),
            this, SLOT(socketError(QBluetoothSocket::SocketError)));
    //! [Initiating server socket]
    setMessage(QStringLiteral("Client connected."));

    QByteArray size;
    size.setNum(m_boardWidth);
    size.append(' ');
    QByteArray size1;
    size1.setNum(m_boardHeight);
    size.append(size1);
    size.append(" \n");
    socket->write(size.constData());

}

开发者ID:lollinus，项目名称:qt-5.3-examples，代码行数:28，代码来源:pingpong.cpp

示例5: connect

void SocketThread::run()
{
	{
	queryTime.restart();
	if(isLogEnabled)logThread->writeLog("SocketThread Started");
	sslSocket=new QSslSocket;
	connect(this,SIGNAL(sendToApiSignal(QByteArray, QByteArray)),this,SLOT(sendToApiSlot(QByteArray, QByteArray)));
	connect(this,SIGNAL(reconnectApiSignal()),this,SLOT(reconnectApiSlot()));
	connect(sslSocket,SIGNAL(readyRead()),SLOT(readSocket()));

	secondTimer=new QTimer;
	connect(secondTimer,SIGNAL(timeout()),this,SLOT(secondSlot()));

	if(useSSL)sslSocket->connectToHostEncrypted(hostName, 443);
		else  sslSocket->connectToHost(hostName, 80);
	sslSocket->waitForConnected();
	if(isLogEnabled)
	{
		logThread->writeLog("SSL Socket state:"+sslSocket->errorString().toAscii()+". Supported: "+QByteArray::number(sslSocket->supportsSsl()));
	}
	
	secondTimer->start(100);
	sendPendingData();
	}
	exec();
}

开发者ID:kmkaplan，项目名称:QtBitcoinTrader，代码行数:26，代码来源:socketthread.cpp

示例6: qDebug

//! [startClient]
void RfCommClient::startClient(const QBluetoothServiceInfo &remoteService)
{
    qDebug() << __PRETTY_FUNCTION__ << ">>";
    serviceInfo = remoteService;

    // make sure preconditions are met
    if (!powerOn() || socket) {
        qDebug() << __PRETTY_FUNCTION__ << "<< power not on or socket already exists!";
        return;
    }

    // Connect to service
    if (state == listening)
        state = pendingConnections;
    socket = new QBluetoothSocket(QBluetoothSocket::RfcommSocket);
    qDebug() << "Create socket";
    socket->connectToService(remoteService);
    qDebug() << "ConnecttoService done";

    connect(socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    connect(socket, SIGNAL(connected()), this, SLOT(connected()));
    connect(socket, SIGNAL(disconnected()), this, SLOT(socketDisconnected()));
    connect(socket, SIGNAL(error(QBluetoothSocket::SocketError)), this, SLOT(error(QBluetoothSocket::SocketError)));

    qDebug() << __PRETTY_FUNCTION__ << "<<";
}

开发者ID:lainwir3d，项目名称:qtconnectivity，代码行数:27，代码来源:rfcommclient.cpp

示例7: QMainWindow

MainWindow::MainWindow(QWidget *parent)
    : QMainWindow(parent), ui(new Ui::MainWindow),media(0)
{
    isConnected=false;
    controllerConnected=false;
    ui->setupUi(this);
    this->setWindowTitle("Au2");

    instance = new VlcInstance(VlcCommon::args(), this);
    player = new VlcMediaPlayer(instance);
    player->setVideoWidget(ui->video);

    readDataFromFile();

    data[1] = 0;//hastighed
    data[2] = 0;//afstand
    data[3] = 0;//acceleration
    data[4] = 1;//AKS = on

    ui->AKS->setText("AKS-On");

    updateData();

    connect(ui->OpretForbindelse, SIGNAL(clicked()), this, SLOT(Au2connect()));
    connect(ui->KonfigurerIP, SIGNAL(clicked()), this, SLOT(konfigurerIP()));
    connect(ui->AKS, SIGNAL(clicked()), this, SLOT(AKSstatus()));
    connect(ui->IndstilMaksHastighed, SIGNAL(clicked()), this, SLOT(maksHastighed()));
    connect(ui->KalibrerStyretoj, SIGNAL(clicked()), this, SLOT(kalibrerStyretoj()));
    connect(ui->LukNed, SIGNAL(clicked()), this, SLOT(shutDown()));
    connect(this, SIGNAL(sig_getData()), this, SLOT(readSocket()));
}

开发者ID:KarstenSN，项目名称:E4PRJ4，代码行数:31，代码来源:mainwindow.cpp

示例8: while

void LocalSocketConnection::start()
{
  if (m_socket) {
    m_holdRequests = false;
    while (m_socket->bytesAvailable() != 0)
      readSocket();
  }
}

开发者ID:OpenChemistry，项目名称:molequeue，代码行数:8，代码来源:localsocketconnection.cpp

示例9: QObject

Connection::Connection(QObject *parent) :
    QObject(parent)
{
    conection = new QLocalSocket(this);

    connect(conection,SIGNAL(readyRead()),this,SLOT(readSocket()));
    connect(conection,SIGNAL(disconnected()),this,SLOT(discardSocket()));
    conection->connectToServer(Packets::server_name_tag);
}

开发者ID:WecodezFox，项目名称:FoxFramework，代码行数:9，代码来源:connection.cpp

示例10: connect

//! [clientConnected]
void ChatServer::clientConnected()
{
    QBluetoothSocket *socket = rfcommServer->nextPendingConnection();
    if (!socket)
        return;

    connect(socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    connect(socket, SIGNAL(disconnected()), this, SLOT(clientDisconnected()));
    clientSockets.append(socket);
    emit clientConnected(socket->peerName());
}

开发者ID:SchleunigerAG，项目名称:WinEC7_Qt5.3.1_Fixes，代码行数:12，代码来源:chatserver.cpp

示例11: receiver

void receiver(int socket, char *filename)
{
	fd_set read, write;
	char readed[520];
	int f;
	if(filename==NULL)
		f=STDOUT_FILENO;
	else
		f=open(filename,O_WRONLY|O_CREAT|O_TRUNC);
	while(1){
	FD_ZERO(&read);
	FD_ZERO(&write);
	FD_SET(socket,&write);
	FD_SET(socket,&read);
	FD_SET(f,&write);
	if(select(socket+1,&read,&write, NULL,NULL)==-1)
	{
		fprintf(stderr,"Error selectreceiver\n");
		return;
	}

	if(FD_ISSET(socket,&write) && FD_ISSET(socket,&read))
	{
		printf("receiver readwritesocket\n");
		int rd=readSocket(socket,readed,520);
		if(rd>=0)
		{
			pkt_t *pkt=pkt_new();
			pkt_status_code errdec=pkt_decode((const char *)readed,(size_t)rd,pkt);
printf("lu : %s\n",pkt_get_payload(pkt));
			if(errdec==PKT_OK)
			{
				if(pkt_get_type(pkt)==PTYPE_DATA)
				{
					printf("On doit créer ACK/NACK\n");
				}
			}
			else
			{
				fprintf(stderr,"Error receiver decode\n");
				return;
			}
			pkt_del(pkt);
	printf("after del\n");
		}	
	}
	else if(FD_ISSET(f,&write))
	{
		printf("Write file\n");
		break;
	}
	}
}

开发者ID:BenJneB，项目名称:LINGI1341，代码行数:53，代码来源:receiver.c

示例12: connect

void LCDServer::newConnection(QTcpSocket *socket)
{
    connect(socket, SIGNAL(readyRead()),
            this,   SLOT(  readSocket()));
    connect(socket, SIGNAL(disconnected()),
            this,   SLOT(  endConnection()));

    if (debug_level > 0)
        LOG(VB_NETWORK, LOG_INFO, "LCDServer: new connection");

    if (m_lcd)
        m_lcd->switchToTime();
}

开发者ID:stunami，项目名称:mythtv，代码行数:13，代码来源:lcdserver.cpp

示例13: QBluetoothSocket

void iControlPadClient::connectToService(const QBluetoothServiceInfo &remoteService)
{
    if (m_socket)
        return;

    // Connect to service
    m_socket = new QBluetoothSocket(QBluetoothSocket::RfcommSocket);
    qDebug() << "Create socket";
    m_socket->connectToService(remoteService);
    qDebug() << "Connecte Service done";
    connect(m_socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    connect(m_socket, SIGNAL(connected()), this, SLOT(connected()));
    connect(m_socket, SIGNAL(disconnected()), this, SLOT(disconnected()));
}

开发者ID:Summeli，项目名称:iCP4Qt，代码行数:14，代码来源:icontrolpadclient.cpp

示例14: QBluetoothSocket

//! [startClient]
void ChatClient::startClient(const QBluetoothServiceInfo &remoteService)
{
    if (socket)
        return;

    // Connect to service
    socket = new QBluetoothSocket(QBluetoothSocket::RfcommSocket);
    qDebug() << "Create socket";
    socket->connectToService(remoteService);
    qDebug() << "ConnecttoService done";

    connect(socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    connect(socket, SIGNAL(connected()), this, SLOT(connected()));
    connect(socket, SIGNAL(disconnected()), this, SIGNAL(disconnected()));
}

开发者ID:kaltsi，项目名称:qt-mobility，代码行数:16，代码来源:chatclient.cpp

示例15: QQuickWidget

RunnerView::RunnerView(QString appUid, QString server, QWidget* parent) :
    QQuickWidget(parent),
    m_appUid(appUid),
    m_socket(new QLocalSocket(this)),
    m_shared(new QSharedMemory(appUid, this))
{
    qDebug() << "RunnerView::RunnerView";
    connect(engine(), SIGNAL(quit()), this, SLOT(quitApplication()));
    connect(m_socket, SIGNAL(connected()), this, SLOT(socketConnected()));
    connect(m_socket, SIGNAL(disconnected()), this, SLOT(socketDisconnected()));
    connect(m_socket, SIGNAL(error(QLocalSocket::LocalSocketError)), this, SLOT(socketError(QLocalSocket::LocalSocketError)));
    connect(m_socket, SIGNAL(bytesWritten(qint64)), this, SLOT(socketBytesWritten(qint64)));
    connect(m_socket, SIGNAL(readyRead()), this, SLOT(readSocket()));
    m_socket->connectToServer(server);
    qDebug() << "RunnerView::RunnerView - END";
}

开发者ID:Kuihku，项目名称:QMLMultiComputer，代码行数:16，代码来源:runnerview.cpp

示例16: QTcpSocket

void ServerThread::run()
{
    _tcpSocket = new QTcpSocket();

    //qDebug () << "Setting socket descriptor " << _socketDescriptor;

    if (!_tcpSocket->setSocketDescriptor(_socketDescriptor))
    {
        qDebug() << "Cant set socket descriptor " << _socketDescriptor <<  " " << _tcpSocket->errorString();
        return;
    }

    connect(_tcpSocket, SIGNAL(readyRead()), this, SLOT(readSocket()), Qt::DirectConnection);
    connect(_tcpSocket, SIGNAL(disconnected()), this, SLOT(handleSocketDisconnect()), Qt::DirectConnection);

    exec();
}

开发者ID:roFilip，项目名称:COMP8005_A2，代码行数:17，代码来源:serverthread.cpp

示例17: readSocket

void *testReaderUnix(void *)
{
	UDDSocket readSocket("testDestination");
	readSocket.nonblocking();
	int rc = 0;
	while (rc<gNumToSend) {
		char buf[MAX_UDP_LENGTH];
		int count = readSocket.read(buf);
		if (count>0) {
			COUT("read: " << buf);
			rc++;
		} else {
			sleep(2);
		}
	}
	return NULL;
}

开发者ID:57-Wolve，项目名称:OpenBTS-UMTS，代码行数:17，代码来源:SocketsTest.cpp

示例18: listen

int ServerSocket::listenOnSocket()
{
	int listenErr = listen(this->sockfd, BACKLOG);
	if (listenErr != 0) {
		printf("\nSocket Listen FAILED! %d\n", errno);
		return cleanup();
	}
	printf("\nListening on %d...", PORT);
	acceptConnection();
	printf("\nConnection Accepted!");
	char *buf = new char[128];
	char *start = buf;
	int len = readSocket(buf);
	printf("\nReceived %d bytes", len);
	printf("\nReceived %s", start);
	writeToSocket("RESPONSE");
	return 0;
}

开发者ID:majorsaber，项目名称:sockets，代码行数:18，代码来源:ServerSocket.cpp

示例19: disconnect

void LocalSocketConnection::setSocket(QLocalSocket *socket)
{
  if (m_socket != NULL) {
    m_socket->abort();
    m_socket->disconnect(this);
    disconnect(m_socket);
    m_socket->deleteLater();
  }
  if (socket != NULL) {
    connect(socket, SIGNAL(readyRead()),
            this, SLOT(readSocket()));
    connect(socket, SIGNAL(disconnected()),
            this, SIGNAL(disconnected()));
    connect(socket, SIGNAL(destroyed()),
            this, SLOT(socketDestroyed()));
  }
  m_dataStream->setDevice(socket);
  m_dataStream->setVersion(QDataStream::Qt_4_8);
  m_socket = socket;
}

开发者ID:OpenChemistry，项目名称:molequeue，代码行数:20，代码来源:localsocketconnection.cpp

示例20: error

void QxThread::doProcess(QTcpSocket & socket)
{
    if (! socket.setSocketDescriptor(m_iSocketDescriptor))
    {
        Q_EMIT error("[QxOrm] invalid socket descriptor : cannot start transaction", QxTransaction_ptr());
        return;
    }

    qx_bool bReadOk = readSocket(socket);
    if (! bReadOk) {
        Q_EMIT error(QString("[QxOrm] unable to read request from socket : '") + bReadOk.getDesc() + QString("'"), QxTransaction_ptr());
        return;
    }
    if (! m_bIsRunning) {
        return;
    }

    Q_EMIT transactionStarted(m_pTransaction);
    try {
        m_pTransaction->executeServer();
    }
    catch (const qx::exception & x) {
        qx_bool xb = x.toQxBool();
        m_pTransaction->setMessageReturn(xb);
    }
    catch (const std::exception & e) {
        m_pTransaction->setMessageReturn(qx_bool(QX_ERROR_UNKNOWN, e.what()));
    }
    catch (...) {
        m_pTransaction->setMessageReturn(qx_bool(QX_ERROR_UNKNOWN, "unknown error"));
    }
    if (! m_bIsRunning) {
        return;
    }

    qx_bool bWriteOk = writeSocket(socket);
    if (! bWriteOk) {
        Q_EMIT error(QString("[QxOrm] unable to write reply to socket : '") + bWriteOk.getDesc() + QString("'"), m_pTransaction);
    }
    Q_EMIT transactionFinished(m_pTransaction);
}

开发者ID:jgh0721，项目名称:iMonPlatform，代码行数:41，代码来源:QxThread.cpp

注：本文中的readSocket函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ readString函数代码示例发布时间：2022-05-30

C++ readShort函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17974|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9569|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8129|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8511|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8415|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9309|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8378|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7810|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8364|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7362|2022-11-06

客服电话

电子邮件

C++ readSocket函数代码示例

示例1: qDebug

示例2: connect

示例3: incomingConnection

示例4: setMessage

示例5: connect

示例6: qDebug

示例7: QMainWindow

示例8: while

示例9: QObject

示例10: connect

示例11: receiver

示例12: connect

示例13: QBluetoothSocket

示例14: QBluetoothSocket

示例15: QQuickWidget

示例16: QTcpSocket

示例17: readSocket

示例18: listen

示例19: disconnect

示例20: error

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

小程序canvas，fillText()文字自动换行

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053