• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ read_unlock_irq函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中read_unlock_irq函数的典型用法代码示例。如果您正苦于以下问题：C++ read_unlock_irq函数的具体用法？C++ read_unlock_irq怎么用？C++ read_unlock_irq使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了read_unlock_irq函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: zfcp_init_device_configure

static void __init zfcp_init_device_configure(void)
{
	struct zfcp_adapter *adapter;
	struct zfcp_port *port;
	struct zfcp_unit *unit;

	down(&zfcp_data.config_sema);
	read_lock_irq(&zfcp_data.config_lock);
	adapter = zfcp_get_adapter_by_busid(zfcp_data.init_busid);
	if (adapter)
		zfcp_adapter_get(adapter);
	read_unlock_irq(&zfcp_data.config_lock);

	if (!adapter)
		goto out_adapter;
	port = zfcp_port_enqueue(adapter, zfcp_data.init_wwpn, 0, 0);
	if (IS_ERR(port))
		goto out_port;
	unit = zfcp_unit_enqueue(port, zfcp_data.init_fcp_lun);
	if (IS_ERR(unit))
		goto out_unit;
	up(&zfcp_data.config_sema);
	ccw_device_set_online(adapter->ccw_device);
	zfcp_erp_wait(adapter);
	down(&zfcp_data.config_sema);
	zfcp_unit_put(unit);
out_unit:
	zfcp_port_put(port);
out_port:
	zfcp_adapter_put(adapter);
out_adapter:
	up(&zfcp_data.config_sema);
	return;
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:34，代码来源:zfcp_aux.c


示例2: ns2_led_get_mode

static int ns2_led_get_mode(struct ns2_led_data *led_dat,
			    enum ns2_led_modes *mode)
{
	int i;
	int ret = -EINVAL;
	int cmd_level;
	int slow_level;

	read_lock_irq(&led_dat->rw_lock);

	cmd_level = gpio_get_value(led_dat->cmd);
	slow_level = gpio_get_value(led_dat->slow);

	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
		if (cmd_level == ns2_led_modval[i].cmd_level &&
		    slow_level == ns2_led_modval[i].slow_level) {
			*mode = ns2_led_modval[i].mode;
			ret = 0;
			break;
		}
	}

	read_unlock_irq(&led_dat->rw_lock);

	return ret;
}
开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:26，代码来源:leds-ns2.c


示例3: mps_death

/*
 * Our MPS died. Tell our daemon to send NHRP data plane purge to each
 * of the egress shortcuts we have.
 */
static void mps_death( struct k_message * msg, struct mpoa_client * mpc )
{
	eg_cache_entry *entry;

	dprintk("mpoa: (%s) mps_death:\n", mpc->dev->name);

	if(memcmp(msg->MPS_ctrl, mpc->mps_ctrl_addr, ATM_ESA_LEN)){
		printk("mpoa: (%s) mps_death: wrong MPS\n", mpc->dev->name);
		return;
	}

	/* FIXME: This knows too much of the cache structure */
	read_lock_irq(&mpc->egress_lock);
	entry = mpc->eg_cache;
	while (entry != NULL) {
		purge_egress_shortcut(entry->shortcut, entry);
		entry = entry->next;
	}
	read_unlock_irq(&mpc->egress_lock);

	mpc->in_ops->destroy_cache(mpc);
	mpc->eg_ops->destroy_cache(mpc);

	return;
}
开发者ID:FatSunHYS，项目名称:OSCourseDesign，代码行数:29，代码来源:mpc.c


示例4: zfcp_sysfs_unit_remove_store

static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev,
					    struct device_attribute *attr,
					    const char *buf, size_t count)
{
	struct zfcp_port *port = dev_get_drvdata(dev);
	struct zfcp_unit *unit;
	u64 fcp_lun;
	LIST_HEAD(unit_remove_lh);
	struct scsi_device *sdev;

	mutex_lock(&zfcp_data.config_mutex);
	if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_REMOVE) {
		mutex_unlock(&zfcp_data.config_mutex);
		return -EBUSY;
	}

	if (strict_strtoull(buf, 0, (unsigned long long *) &fcp_lun)) {
		mutex_unlock(&zfcp_data.config_mutex);
		return -EINVAL;
	}

	read_lock_irq(&zfcp_data.config_lock);
	unit = zfcp_get_unit_by_lun(port, fcp_lun);
	read_unlock_irq(&zfcp_data.config_lock);
	if (!unit) {
		mutex_unlock(&zfcp_data.config_mutex);
		return -ENXIO;
	}
	zfcp_unit_get(unit);
	mutex_unlock(&zfcp_data.config_mutex);

	sdev = scsi_device_lookup(port->adapter->scsi_host, 0,
				  port->starget_id,
				  scsilun_to_int((struct scsi_lun *)&fcp_lun));
	if (sdev) {
		scsi_remove_device(sdev);
		scsi_device_put(sdev);
	}

	mutex_lock(&zfcp_data.config_mutex);
	zfcp_unit_put(unit);
	if (atomic_read(&unit->refcount)) {
		mutex_unlock(&zfcp_data.config_mutex);
		return -ENXIO;
	}

	write_lock_irq(&zfcp_data.config_lock);
	atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
	list_move(&unit->list, &unit_remove_lh);
	write_unlock_irq(&zfcp_data.config_lock);
	mutex_unlock(&zfcp_data.config_mutex);

	zfcp_erp_unit_shutdown(unit, 0, "syurs_1", NULL);
	zfcp_erp_wait(unit->port->adapter);
	zfcp_unit_dequeue(unit);

	return (ssize_t)count;
}
开发者ID:3null，项目名称:fastsocket，代码行数:58，代码来源:zfcp_sysfs.c


示例5: read_lock_irq

static eg_cache_entry *eg_cache_get_by_cache_id(__be32 cache_id, struct mpoa_client *mpc)
{
    eg_cache_entry *entry;

    read_lock_irq(&mpc->egress_lock);
    entry = mpc->eg_cache;
    while(entry != NULL) {
        if(entry->ctrl_info.cache_id == cache_id) {
            atomic_inc(&entry->use);
            read_unlock_irq(&mpc->egress_lock);
            return entry;
        }
        entry = entry->next;
    }
    read_unlock_irq(&mpc->egress_lock);

    return NULL;
}
开发者ID:KroMignon，项目名称:linux-emcraft，代码行数:18，代码来源:mpoa_caches.c


示例6: nkfs_btree_nodes_lookup

static struct nkfs_btree_node * nkfs_btree_nodes_lookup(struct nkfs_btree *tree,
	u64 block)
{	
	struct nkfs_btree_node *node;
	read_lock_irq(&tree->nodes_lock);
	node = __nkfs_btree_nodes_lookup(tree, block);
	if (node)
		NKFS_BTREE_NODE_REF(node);
	read_unlock_irq(&tree->nodes_lock);
	return node;
}
开发者ID:zhangjinde，项目名称:nkfs，代码行数:11，代码来源:btree.c


示例7: zfcp_scsi_adapter_unregister

/**
 * zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
 * @adapter: The zfcp adapter to unregister.
 */
void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
{
	struct Scsi_Host *shost;
	struct zfcp_port *port;

	shost = adapter->scsi_host;
	if (!shost)
		return;

	read_lock_irq(&adapter->port_list_lock);
	list_for_each_entry(port, &adapter->port_list, list)
		port->rport = NULL;
	read_unlock_irq(&adapter->port_list_lock);

	fc_remove_host(shost);
	scsi_remove_host(shost);
	scsi_host_put(shost);
	adapter->scsi_host = NULL;
}
开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:23，代码来源:zfcp_scsi.c


示例8: clean_up

/*
 * purge egress cache and tell daemon to 'action' (DIE, RELOAD)
 */
static void clean_up(struct k_message *msg, struct mpoa_client *mpc, int action)
{

	eg_cache_entry *entry;
	msg->type = SND_EGRESS_PURGE;


	/* FIXME: This knows too much of the cache structure */
	read_lock_irq(&mpc->egress_lock);
	entry = mpc->eg_cache;
	while (entry != NULL) {
		msg->content.eg_info = entry->ctrl_info;
		dprintk("cache_id %u\n", entry->ctrl_info.cache_id);
		msg_to_mpoad(msg, mpc);
		entry = entry->next;
	}
	read_unlock_irq(&mpc->egress_lock);

	msg->type = action;
	msg_to_mpoad(msg, mpc);
}
开发者ID:BWhitten，项目名称:linux-stable，代码行数:24，代码来源:mpc.c


示例9: zfcp_init_device_configure

static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
{
	struct zfcp_adapter *adapter;
	struct zfcp_port *port;
	struct zfcp_unit *unit;

	down(&zfcp_data.config_sema);
	read_lock_irq(&zfcp_data.config_lock);
	adapter = zfcp_get_adapter_by_busid(busid);
	if (adapter)
		zfcp_adapter_get(adapter);
	read_unlock_irq(&zfcp_data.config_lock);

	if (!adapter)
		goto out_adapter;
	port = zfcp_port_enqueue(adapter, wwpn, 0, 0);
	if (IS_ERR(port))
		goto out_port;
	unit = zfcp_unit_enqueue(port, lun);
	if (IS_ERR(unit))
		goto out_unit;
	up(&zfcp_data.config_sema);
	ccw_device_set_online(adapter->ccw_device);

	zfcp_erp_wait(adapter);
	wait_event(adapter->erp_done_wqh,
		   !(atomic_read(&unit->status) &
				ZFCP_STATUS_UNIT_SCSI_WORK_PENDING));

	down(&zfcp_data.config_sema);
	zfcp_unit_put(unit);
out_unit:
	zfcp_port_put(port);
out_port:
	zfcp_adapter_put(adapter);
out_adapter:
	up(&zfcp_data.config_sema);
	return;
}
开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:39，代码来源:zfcp_aux.c


示例10: check_for_tasks

static inline void check_for_tasks(int dead_cpu)
{
	struct task_struct *g, *p;

	read_lock_irq(&tasklist_lock);
	do_each_thread(g, p) {
		if (!p->on_rq)
			continue;
		/*
		 * We do the check with unlocked task_rq(p)->lock.
		 * Order the reading to do not warn about a task,
		 * which was running on this cpu in the past, and
		 * it's just been woken on another cpu.
		 */
		rmb();
		if (task_cpu(p) != dead_cpu)
			continue;

		pr_warn("Task %s (pid=%d) is on cpu %d (state=%ld, flags=%x)\n",
			p->comm, task_pid_nr(p), dead_cpu, p->state, p->flags);
	} while_each_thread(g, p);
	read_unlock_irq(&tasklist_lock);
}
开发者ID:tsj123，项目名称:androidx86_remix，代码行数:23，代码来源:cpu.c


示例11: zfcp_scsi_forget_cmnds


//.........这里部分代码省略.........
	adapter->scsi_host->max_id = 511;
	adapter->scsi_host->max_lun = 0xFFFFFFFF;
	adapter->scsi_host->max_channel = 0;
	adapter->scsi_host->unique_id = dev_id.devno;
	adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
	adapter->scsi_host->transportt = zfcp_scsi_transport_template;

	adapter->scsi_host->hostdata[0] = (unsigned long) adapter;

	if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
		scsi_host_put(adapter->scsi_host);
		return -EIO;
	}

	return 0;
}

/**
 * zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
 * @adapter: The zfcp adapter to unregister.
 */
void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
{
	struct Scsi_Host *shost;
	struct zfcp_port *port;

	shost = adapter->scsi_host;
	if (!shost)
		return;

	read_lock_irq(&adapter->port_list_lock);
	list_for_each_entry(port, &adapter->port_list, list)
		port->rport = NULL;
	read_unlock_irq(&adapter->port_list_lock);

	fc_remove_host(shost);
	scsi_remove_host(shost);
	scsi_host_put(shost);
	adapter->scsi_host = NULL;
}

static struct fc_host_statistics*
zfcp_scsi_init_fc_host_stats(struct zfcp_adapter *adapter)
{
	struct fc_host_statistics *fc_stats;

	if (!adapter->fc_stats) {
		fc_stats = kmalloc(sizeof(*fc_stats), GFP_KERNEL);
		if (!fc_stats)
			return NULL;
		adapter->fc_stats = fc_stats; /* freed in adapter_release */
	}
	memset(adapter->fc_stats, 0, sizeof(*adapter->fc_stats));
	return adapter->fc_stats;
}

static void zfcp_scsi_adjust_fc_host_stats(struct fc_host_statistics *fc_stats,
					   struct fsf_qtcb_bottom_port *data,
					   struct fsf_qtcb_bottom_port *old)
{
	fc_stats->seconds_since_last_reset =
		data->seconds_since_last_reset - old->seconds_since_last_reset;
	fc_stats->tx_frames = data->tx_frames - old->tx_frames;
	fc_stats->tx_words = data->tx_words - old->tx_words;
	fc_stats->rx_frames = data->rx_frames - old->rx_frames;
	fc_stats->rx_words = data->rx_words - old->rx_words;
开发者ID:AlexShiLucky，项目名称:linux，代码行数:67，代码来源:zfcp_scsi.c


示例12: hp_sdc_put

unsigned long hp_sdc_put(void)
{
	hp_sdc_transaction *curr;
	uint8_t act;
	int idx, curridx;

	int limit = 0;

	write_lock(&hp_sdc.lock);

	/* If i8042 buffers are full, we cannot do anything that
	   requires output, so we skip to the administrativa. */
	if (hp_sdc.ibf) {
		hp_sdc_status_in8();
		if (hp_sdc.ibf)
			goto finish;
	}

 anew:
	/* See if we are in the middle of a sequence. */
	if (hp_sdc.wcurr < 0)
		hp_sdc.wcurr = 0;
	read_lock_irq(&hp_sdc.rtq_lock);
	if (hp_sdc.rcurr == hp_sdc.wcurr)
		hp_sdc.wcurr++;
	read_unlock_irq(&hp_sdc.rtq_lock);
	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
		hp_sdc.wcurr = 0;
	curridx = hp_sdc.wcurr;

	if (hp_sdc.tq[curridx] != NULL)
		goto start;

	while (++curridx != hp_sdc.wcurr) {
		if (curridx >= HP_SDC_QUEUE_LEN) {
			curridx = -1; /* Wrap to top */
			continue;
		}
		read_lock_irq(&hp_sdc.rtq_lock);
		if (hp_sdc.rcurr == curridx) {
			read_unlock_irq(&hp_sdc.rtq_lock);
			continue;
		}
		read_unlock_irq(&hp_sdc.rtq_lock);
		if (hp_sdc.tq[curridx] != NULL)
			break; /* Found one. */
	}
	if (curridx == hp_sdc.wcurr) { /* There's nothing queued to do. */
		curridx = -1;
	}
	hp_sdc.wcurr = curridx;

 start:

	/* Check to see if the interrupt mask needs to be set. */
	if (hp_sdc.set_im) {
		hp_sdc_status_out8(hp_sdc.im | HP_SDC_CMD_SET_IM);
		hp_sdc.set_im = 0;
		goto finish;
	}

	if (hp_sdc.wcurr == -1)
		goto done;

	curr = hp_sdc.tq[curridx];
	idx = curr->actidx;

	if (curr->actidx >= curr->endidx) {
		hp_sdc.tq[curridx] = NULL;
		/* Interleave outbound data between the transactions. */
		hp_sdc.wcurr++;
		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
			hp_sdc.wcurr = 0;
		goto finish;
	}

	act = curr->seq[idx];
	idx++;

	if (curr->idx >= curr->endidx) {
		if (act & HP_SDC_ACT_DEALLOC)
			kfree(curr);
		hp_sdc.tq[curridx] = NULL;
		/* Interleave outbound data between the transactions. */
		hp_sdc.wcurr++;
		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
			hp_sdc.wcurr = 0;
		goto finish;
	}

	while (act & HP_SDC_ACT_PRECMD) {
		if (curr->idx != idx) {
			idx++;
			act &= ~HP_SDC_ACT_PRECMD;
			break;
		}
		hp_sdc_status_out8(curr->seq[idx]);
		curr->idx++;
		/* act finished? */
		if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_PRECMD)
//.........这里部分代码省略.........
开发者ID:AshishNamdev，项目名称:linux，代码行数:101，代码来源:hp_sdc.c


示例13: kzalloc

/**
 * zfcp_port_enqueue - enqueue port to port list of adapter
 * @adapter: adapter where remote port is added
 * @wwpn: WWPN of the remote port to be enqueued
 * @status: initial status for the port
 * @d_id: destination id of the remote port to be enqueued
 * Returns: pointer to enqueued port on success, ERR_PTR on error
 * Locks: config_sema must be held to serialize changes to the port list
 *
 * All port internal structures are set up and the sysfs entry is generated.
 * d_id is used to enqueue ports with a well known address like the Directory
 * Service for nameserver lookup.
 */
struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn,
				     u32 status, u32 d_id)
{
	struct zfcp_port *port;
	int retval;

	port = kzalloc(sizeof(struct zfcp_port), GFP_KERNEL);
	if (!port)
		return ERR_PTR(-ENOMEM);

	init_waitqueue_head(&port->remove_wq);
	INIT_LIST_HEAD(&port->unit_list_head);
	INIT_WORK(&port->gid_pn_work, zfcp_erp_port_strategy_open_lookup);

	port->adapter = adapter;
	port->d_id = d_id;
	port->wwpn = wwpn;

	/* mark port unusable as long as sysfs registration is not complete */
	atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status);
	atomic_set(&port->refcount, 0);

	dev_set_name(&port->sysfs_device, "0x%016llx",
		     (unsigned long long)wwpn);
	port->sysfs_device.parent = &adapter->ccw_device->dev;

	port->sysfs_device.release = zfcp_sysfs_port_release;
	dev_set_drvdata(&port->sysfs_device, port);

	read_lock_irq(&zfcp_data.config_lock);
	if (!(status & ZFCP_STATUS_PORT_NO_WWPN))
		if (zfcp_get_port_by_wwpn(adapter, wwpn)) {
			read_unlock_irq(&zfcp_data.config_lock);
			goto err_out_free;
		}
	read_unlock_irq(&zfcp_data.config_lock);

	if (device_register(&port->sysfs_device))
		goto err_out_free;

	retval = sysfs_create_group(&port->sysfs_device.kobj,
				    &zfcp_sysfs_port_attrs);

	if (retval) {
		device_unregister(&port->sysfs_device);
		goto err_out;
	}

	zfcp_port_get(port);

	write_lock_irq(&zfcp_data.config_lock);
	list_add_tail(&port->list, &adapter->port_list_head);
	atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
	atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status);

	write_unlock_irq(&zfcp_data.config_lock);

	zfcp_adapter_get(adapter);
	return port;

err_out_free:
	kfree(port);
err_out:
	return ERR_PTR(-EINVAL);
}
开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:78，代码来源:zfcp_aux.c


示例14: zfcp_scsi_forget_cmnds


//.........这里部分代码省略.........
	adapter->scsi_host->max_id = 511;
	adapter->scsi_host->max_lun = 0xFFFFFFFF;
	adapter->scsi_host->max_channel = 0;
	adapter->scsi_host->unique_id = dev_id.devno;
	adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
	adapter->scsi_host->transportt = zfcp_scsi_transport_template;

	adapter->scsi_host->hostdata[0] = (unsigned long) adapter;

	if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
		scsi_host_put(adapter->scsi_host);
		return -EIO;
	}

	return 0;
}

/**
 * zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
 * @adapter: The zfcp adapter to unregister.
 */
void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
{
	struct Scsi_Host *shost;
	struct zfcp_port *port;

	shost = adapter->scsi_host;
	if (!shost)
		return;

	read_lock_irq(&adapter->port_list_lock);
	list_for_each_entry(port, &adapter->port_list, list)
		port->rport = NULL;
	read_unlock_irq(&adapter->port_list_lock);

	fc_remove_host(shost);
	scsi_remove_host(shost);
	scsi_host_put(shost);
	adapter->scsi_host = NULL;
}

static struct fc_host_statistics*
zfcp_init_fc_host_stats(struct zfcp_adapter *adapter)
{
	struct fc_host_statistics *fc_stats;

	if (!adapter->fc_stats) {
		fc_stats = kmalloc(sizeof(*fc_stats), GFP_KERNEL);
		if (!fc_stats)
			return NULL;
		adapter->fc_stats = fc_stats; /* freed in adapter_release */
	}
	memset(adapter->fc_stats, 0, sizeof(*adapter->fc_stats));
	return adapter->fc_stats;
}

static void zfcp_adjust_fc_host_stats(struct fc_host_statistics *fc_stats,
				      struct fsf_qtcb_bottom_port *data,
				      struct fsf_qtcb_bottom_port *old)
{
	fc_stats->seconds_since_last_reset =
		data->seconds_since_last_reset - old->seconds_since_last_reset;
	fc_stats->tx_frames = data->tx_frames - old->tx_frames;
	fc_stats->tx_words = data->tx_words - old->tx_words;
	fc_stats->rx_frames = data->rx_frames - old->rx_frames;
	fc_stats->rx_words = data->rx_words - old->rx_words;
开发者ID:forgivemyheart，项目名称:linux，代码行数:67，代码来源:zfcp_scsi.c


示例15: kzalloc

/**
 * zfcp_port_enqueue - enqueue port to port list of adapter
 * @adapter: adapter where remote port is added
 * @wwpn: WWPN of the remote port to be enqueued
 * @status: initial status for the port
 * @d_id: destination id of the remote port to be enqueued
 * Returns: pointer to enqueued port on success, ERR_PTR on error
 * Locks: config_sema must be held to serialize changes to the port list
 *
 * All port internal structures are set up and the sysfs entry is generated.
 * d_id is used to enqueue ports with a well known address like the Directory
 * Service for nameserver lookup.
 */
struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn,
				     u32 status, u32 d_id)
{
	struct zfcp_port *port;
	int retval;
	char *bus_id;

	port = kzalloc(sizeof(struct zfcp_port), GFP_KERNEL);
	if (!port)
		return ERR_PTR(-ENOMEM);

	init_waitqueue_head(&port->remove_wq);

	INIT_LIST_HEAD(&port->unit_list_head);
	INIT_LIST_HEAD(&port->unit_remove_lh);

	port->adapter = adapter;
	port->d_id = d_id;
	port->wwpn = wwpn;

	/* mark port unusable as long as sysfs registration is not complete */
	atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status);
	atomic_set(&port->refcount, 0);

	if (status & ZFCP_STATUS_PORT_WKA) {
		switch (d_id) {
		case ZFCP_DID_DIRECTORY_SERVICE:
			bus_id = "directory";
			break;
		case ZFCP_DID_MANAGEMENT_SERVICE:
			bus_id = "management";
			break;
		case ZFCP_DID_KEY_DISTRIBUTION_SERVICE:
			bus_id = "key_distribution";
			break;
		case ZFCP_DID_ALIAS_SERVICE:
			bus_id = "alias";
			break;
		case ZFCP_DID_TIME_SERVICE:
			bus_id = "time";
			break;
		default:
			kfree(port);
			return ERR_PTR(-EINVAL);
		}
		snprintf(port->sysfs_device.bus_id, BUS_ID_SIZE, "%s", bus_id);
		port->sysfs_device.parent = &adapter->generic_services;
	} else {
		snprintf(port->sysfs_device.bus_id,
			 BUS_ID_SIZE, "0x%016llx", wwpn);
		port->sysfs_device.parent = &adapter->ccw_device->dev;
	}

	port->sysfs_device.release = zfcp_sysfs_port_release;
	dev_set_drvdata(&port->sysfs_device, port);

	read_lock_irq(&zfcp_data.config_lock);
	if (!(status & ZFCP_STATUS_PORT_NO_WWPN))
		if (zfcp_get_port_by_wwpn(adapter, wwpn)) {
			read_unlock_irq(&zfcp_data.config_lock);
			goto err_out_free;
		}
	read_unlock_irq(&zfcp_data.config_lock);

	if (device_register(&port->sysfs_device))
		goto err_out_free;

	if (status & ZFCP_STATUS_PORT_WKA)
		retval = sysfs_create_group(&port->sysfs_device.kobj,
					    &zfcp_sysfs_ns_port_attrs);
	else
		retval = sysfs_create_group(&port->sysfs_device.kobj,
					    &zfcp_sysfs_port_attrs);

	if (retval) {
		device_unregister(&port->sysfs_device);
		goto err_out;
	}

	zfcp_port_get(port);

	write_lock_irq(&zfcp_data.config_lock);
	list_add_tail(&port->list, &adapter->port_list_head);
	atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
	atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status);
	if (d_id == ZFCP_DID_DIRECTORY_SERVICE)
		if (!adapter->nameserver_port)
//.........这里部分代码省略.........
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:101，代码来源:zfcp_aux.c



注：本文中的read_unlock_irq函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ read_v3s16函数代码示例发布时间：2022-05-30
下一篇：
C++ read_unlock_bh函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap