C++ recGblSetSevr函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中recGblSetSevr函数的典型用法代码示例。如果您正苦于以下问题：C++ recGblSetSevr函数的具体用法？C++ recGblSetSevr怎么用？C++ recGblSetSevr使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了recGblSetSevr函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: processAiAverage

static long processAiAverage(aiRecord *pr)
{
    devInt32Pvt *pPvt = (devInt32Pvt *)pr->dpvt;
    double rval;

    epicsMutexLock(pPvt->ringBufferLock);
    if (pPvt->numAverage == 0) {
        (void)recGblSetSevr(pr, UDF_ALARM, INVALID_ALARM);
        pr->udf = 1;
        epicsMutexUnlock(pPvt->ringBufferLock);
        return -2;
    }
    rval = pPvt->sum/pPvt->numAverage;
    /*round result*/
    rval += (pPvt->sum>0.0) ? 0.5 : -0.5;
    pr->rval = (epicsInt32) rval;
    pPvt->numAverage = 0;
    pPvt->sum = 0.;
    asynPrint(pPvt->pasynUser, ASYN_TRACEIO_DEVICE,
        "%s devAsynInt32::processAiInt32Average rval=%d, status=%d\n",pr->name, pr->rval, pPvt->result.status);
    if (pPvt->result.status == asynSuccess) {
        pr->udf = 0;
    }
    else {
        pasynEpicsUtils->asynStatusToEpicsAlarm(pPvt->result.status, READ_ALARM, &pPvt->alarmStat,
                                                INVALID_ALARM, &pPvt->alarmSevr);
        (void)recGblSetSevr(pr, pPvt->alarmStat, pPvt->alarmSevr);
        pPvt->result.status = 0;
    }
    epicsMutexUnlock(pPvt->ringBufferLock);
    return 0;
}

开发者ID:arvinderpalaha，项目名称:asyn，代码行数:32，代码来源:devAsynInt32.c

示例2: alarm

static long alarm(rfmRecord *precord)
{
    long          status   = OK;

    if(precord->udf == TRUE) {
        recGblSetSevr(precord, UDF_ALARM, INVALID_ALARM);
        return status;
     }

     if(precord->val != rfmSuccess) {
        recGblSetSevr(precord, DISABLE_ALARM, MAJOR_ALARM);
        return status;
      }

     if(precord->rfe < 50) { 
        recGblSetSevr(precord,SOFT_ALARM, MAJOR_ALARM);
        return status;
      }

     if(precord->rfe < 100) {
        recGblSetSevr(precord, SOFT_ALARM, MINOR_ALARM);
        return status;
     }

    precord->val = rfmSuccess;
    return status;
}

开发者ID:Sangil-Lee，项目名称:RefCode，代码行数:27，代码来源:rfmRecord.c

示例3: readValue

static long readValue(stringinRecord *prec)
{
	long		status;
        struct stringindset 	*pdset = (struct stringindset *) (prec->dset);

	if (prec->pact == TRUE){
		status=(*pdset->read_stringin)(prec);
		return(status);
	}

	status=dbGetLink(&(prec->siml),DBR_USHORT, &(prec->simm),0,0);
	if (status)
		return(status);

	if (prec->simm == menuYesNoNO){
		status=(*pdset->read_stringin)(prec);
		return(status);
	}
	if (prec->simm == menuYesNoYES){
		status=dbGetLink(&(prec->siol),DBR_STRING,
			prec->sval,0,0);
		if (status==0) {
			strcpy(prec->val,prec->sval);
			prec->udf=FALSE;
		}
	} else {
		status=-1;
		recGblSetSevr(prec,SOFT_ALARM,INVALID_ALARM);
		return(status);
	}
        recGblSetSevr(prec,SIMM_ALARM,prec->sims);

	return(status);
}

开发者ID:ISISComputingGroup，项目名称:EPICS-base，代码行数:34，代码来源:stringinRecord.c

示例4: writeString

static int writeString(gpibDpvt *pgpibDpvt,int P1, int P2, char **P3)
{
    asynUser *pasynUser = pgpibDpvt->pasynUser;
    stringoutRecord *precord = (stringoutRecord*)pgpibDpvt->precord;
    int            nchars;
    gpibCmd *pgpibCmd = gpibCmdGet(pgpibDpvt);
    char *format = (pgpibCmd->format) ? pgpibCmd->format : "%s";

    if(!pgpibDpvt->msg) {
        asynPrint(pasynUser,ASYN_TRACE_ERROR,
            "%s no msg buffer. Must define gpibCmd.msgLen > 0.\n",
            precord->name);
        recGblSetSevr(precord,WRITE_ALARM, INVALID_ALARM);
        return -1;
    }
    nchars = epicsSnprintf(pgpibDpvt->msg,pgpibCmd->msgLen,format,precord->val);
    if(nchars>pgpibCmd->msgLen) { 
        asynPrint(pasynUser,ASYN_TRACE_ERROR, 
            "%s msg buffer too small. msgLen %d message length %d\n", 
            precord->name,pgpibCmd->msgLen,nchars); 
        recGblSetSevr(precord,WRITE_ALARM, INVALID_ALARM); 
        return -1; 
    } 
    asynPrint(pasynUser,ASYN_TRACE_FLOW,"%s writeMsgString\n",precord->name);
    return nchars;
}

开发者ID:A2-Collaboration，项目名称:epics，代码行数:26，代码来源:devGpibConvertExample.c

示例5: processAiAverage

static long processAiAverage(aiRecord *pai)
{
    devPvt *pPvt = (devPvt *)pai->dpvt;
    double dval;

    epicsMutexLock(pPvt->ringBufferLock);
    if (pPvt->numAverage == 0) {
        recGblSetSevr(pai, UDF_ALARM, INVALID_ALARM);
        pai->udf = 1;
        epicsMutexUnlock(pPvt->ringBufferLock);
        return -2;
    }
    dval = pPvt->sum/pPvt->numAverage;
    pPvt->numAverage = 0;
    pPvt->sum = 0.;
    epicsMutexUnlock(pPvt->ringBufferLock);
    pasynEpicsUtils->asynStatusToEpicsAlarm(pPvt->result.status, 
                                            READ_ALARM, &pPvt->result.alarmStatus,
                                            INVALID_ALARM, &pPvt->result.alarmSeverity);
    recGblSetSevr(pai, pPvt->result.alarmStatus, pPvt->result.alarmSeverity);
    if (pPvt->result.status == asynSuccess) {
        pai->val = dval;
        pai->udf = 0;
        asynPrint(pPvt->pasynUser, ASYN_TRACEIO_DEVICE,
                  "%s devAsynFloat64::callbackAiAverage val=%f\n",
                  pai->name, pai->val);
        return 2;
    }
    else {
        pPvt->result.status = asynSuccess;
        return -1;
    }
}

开发者ID:FreddieAkeroyd，项目名称:asyn，代码行数:33，代码来源:devAsynFloat64.c

示例6: writeIt

static asynStatus writeIt(asynUser *pasynUser,const char *message,size_t nbytes)
{
    devPvt     *pdevPvt = (devPvt *)pasynUser->userPvt;
    dbCommon   *precord = pdevPvt->precord;
    asynOctet  *poctet = pdevPvt->poctet;
    void       *octetPvt = pdevPvt->octetPvt;
    asynStatus status;
    size_t     nbytesTransfered;

    status = poctet->write(octetPvt,pasynUser,message,nbytes,&nbytesTransfered);
    if(status!=asynSuccess) {
        asynPrint(pasynUser,ASYN_TRACE_ERROR,
            "%s devTestBlock: writeIt failed %s\n",
            precord->name,pasynUser->errorMessage);
        recGblSetSevr(precord, WRITE_ALARM, INVALID_ALARM);
        return status;
    }
    if(nbytes != nbytesTransfered) {
        asynPrint(pasynUser,ASYN_TRACE_ERROR,
            "%s devTestBlock: writeIt requested %lu but sent %lu bytes\n",
            precord->name,(unsigned long)nbytes,(unsigned long)nbytesTransfered);
        recGblSetSevr(precord, WRITE_ALARM, MINOR_ALARM);
        return asynError;
    }
    asynPrintIO(pasynUser,ASYN_TRACEIO_DEVICE,message,nbytes,
       "%s devTestBlock: writeIt\n",precord->name);
    return status;
}

开发者ID:A2-Collaboration，项目名称:epics，代码行数:28，代码来源:devTestBlock.c

示例7: writeValue

static long writeValue(stringoutRecord *prec)
{
	long		status;
        struct stringoutdset 	*pdset = (struct stringoutdset *) (prec->dset);

	if (prec->pact == TRUE){
		status=(*pdset->write_stringout)(prec);
		return(status);
	}

	status=dbGetLink(&(prec->siml),DBR_USHORT,
		&(prec->simm),0,0);
	if (status)
		return(status);

	if (prec->simm == menuYesNoNO){
		status=(*pdset->write_stringout)(prec);
		return(status);
	}
	if (prec->simm == menuYesNoYES){
		status=dbPutLink(&prec->siol,DBR_STRING,
			prec->val,1);
	} else {
		status=-1;
		recGblSetSevr(prec,SOFT_ALARM,INVALID_ALARM);
		return(status);
	}
        recGblSetSevr(prec,SIMM_ALARM,prec->sims);

	return(status);
}

开发者ID:zlxmsu，项目名称:TestEpics，代码行数:31，代码来源:stringoutRecord.c

示例8: process

static long process(epidRecord *pepid)
{
    struct epidDSET *pdset = (struct epidDSET *)(pepid->dset);
    long  status;
    int pact=pepid->pact;

    if (!pact) { /* If this is not a callback from device support */
        /* fetch the setpoint */
        if(pepid->smsl == menuOmslclosed_loop) {
            status = dbGetLink(&(pepid->stpl),DBR_DOUBLE, &(pepid->val),0,0);
            if (RTN_SUCCESS(status)) pepid->udf=FALSE;
        }
        if (pepid->udf == TRUE ) {
#if LT_EPICSBASE(3,15,0,2)
            recGblSetSevr(pepid,UDF_ALARM,INVALID_ALARM);
#else
            recGblSetSevr(pepid,UDF_ALARM,pepid->udfs);
#endif
            return(0);
        }
    }

    status = (*pdset->do_pid)(pepid);
    /* See if device support set pact=true, meaning  it will call us back */
    if (!pact && pepid->pact) return(0);
    pepid->pact = TRUE;
    recGblGetTimeStamp(pepid);
    checkAlarms(pepid);
    monitor(pepid);
    recGblFwdLink(pepid);
    pepid->pact=FALSE;
    return(status);
}

开发者ID:epics-modules，项目名称:std，代码行数:33，代码来源:epidRecord.c

示例9: writeValue

static long writeValue(lsoRecord *prec)
{
    long status;
    lsodset *pdset = (lsodset *) prec->dset;

    if (prec->pact)
        goto write;

    status = dbGetLink(&prec->siml, DBR_USHORT, &prec->simm, 0, 0);
    if (status)
        return(status);

    switch (prec->simm) {
    case menuYesNoNO:
write:
        status = pdset->write_string(prec);
        break;

    case menuYesNoYES:
        recGblSetSevr(prec, SIMM_ALARM, prec->sims);
        status = dbPutLink(&prec->siol,DBR_STRING, prec->val,1);
        break;

    default:
        recGblSetSevr(prec, SOFT_ALARM, INVALID_ALARM);
        status = -1;
    }

    return status;
}

开发者ID:A2-Collaboration，项目名称:epics，代码行数:30，代码来源:lsoRecord.c

示例10: readValue

static long readValue(waveformRecord *prec)
{
    long          status;
    struct wfdset *pdset = (struct wfdset *) prec->dset;

    if (prec->pact == TRUE) {
        return (*pdset->read_wf)(prec);
    }

    status = dbGetLink(&(prec->siml), DBR_ENUM, &(prec->simm),0,0);
    if (status)
        return status;

    if (prec->simm == menuYesNoNO) {
        return (*pdset->read_wf)(prec);
    }

    if (prec->simm == menuYesNoYES) {
        long nRequest = prec->nelm;
        status = dbGetLink(&(prec->siol), prec->ftvl, prec->bptr, 0, &nRequest);
        /* nord set only for db links: needed for old db_access */
        if (prec->siol.type != CONSTANT) {
            prec->nord = nRequest;
            if (status == 0)
                prec->udf=FALSE;
        }
    } else {
        recGblSetSevr(prec, SOFT_ALARM, INVALID_ALARM);
        return -1;
    }
    recGblSetSevr(prec, SIMM_ALARM, prec->sims);

    return status;
}

开发者ID:zlxmsu，项目名称:epics，代码行数:34，代码来源:waveformRecord.c

示例11: process

static long process(fanoutRecord *prec)
{
    struct link    *plink;
    unsigned short state;
    short          i;
    unsigned short monitor_mask;

    prec->pact = TRUE;

    /* fetch link selection  */
    dbGetLink(&(prec->sell),DBR_USHORT,&(prec->seln),0,0);
    switch (prec->selm){
    case (fanoutSELM_All):
        plink=&(prec->lnk1);
        state=prec->seln;
        for ( i=0; i<6; i++, state>>=1, plink++) {
            if(plink->type!=CONSTANT) dbScanFwdLink(plink);
        }
        break;
    case (fanoutSELM_Specified):
        if(prec->seln>6) {
		recGblSetSevr(prec,SOFT_ALARM,INVALID_ALARM);
            break;
        }
        if(prec->seln==0) {
            break;
        }
        plink=&(prec->lnk1);
        plink += (prec->seln-1); dbScanFwdLink(plink);
        break;
    case (fanoutSELM_Mask):
        if(prec->seln==0) {
            break;
        }
        if(prec->seln>63 ) {
            recGblSetSevr(prec,SOFT_ALARM,INVALID_ALARM);
            break;
        }
        plink=&(prec->lnk1);
        state=prec->seln;
        for ( i=0; i<6; i++, state>>=1, plink++) {
            if(state & 1 && plink->type!=CONSTANT) dbScanFwdLink(plink);
        }
        break;
    default:
        recGblSetSevr(prec,SOFT_ALARM,INVALID_ALARM);
    }
    prec->udf=FALSE;
    recGblGetTimeStamp(prec);
    /* check monitors*/
    /* get previous stat and sevr  and new stat and sevr*/
    monitor_mask = recGblResetAlarms(prec);
    /* process the forward scan link record */
    recGblFwdLink(prec);
    prec->pact=FALSE;
    return(0);
}

开发者ID:ISISComputingGroup，项目名称:EPICS-base，代码行数:57，代码来源:fanoutRecord.c

示例12: inherit_severity

static void inherit_severity(const struct pv_link *ppv_link,
    dbCommon *pdest, epicsEnum16 stat, epicsEnum16 sevr)
{
    switch(ppv_link->pvlMask&pvlOptMsMode) {
        case pvlOptNMS: break;
        case pvlOptMSI: if (sevr < INVALID_ALARM) break;
        case pvlOptMS:  recGblSetSevr(pdest,LINK_ALARM,sevr); break;
        case pvlOptMSS: recGblSetSevr(pdest,stat,sevr); break;
    }
}

开发者ID:T-A-R-L-A，项目名称:EPICS-Base，代码行数:10，代码来源:dbAccess.c

示例13: checkAlarms

static void checkAlarms(selRecord *prec)
{
    double val, hyst, lalm;
    double alev;
    epicsEnum16 asev;

    if (prec->udf) {
        recGblSetSevr(prec, UDF_ALARM, INVALID_ALARM);
        return;
    }

    val = prec->val;
    hyst = prec->hyst;
    lalm = prec->lalm;

    /* alarm condition hihi */
    asev = prec->hhsv;
    alev = prec->hihi;
    if (asev && (val >= alev || ((lalm == alev) && (val >= alev - hyst)))) {
        if (recGblSetSevr(prec, HIHI_ALARM, asev))
            prec->lalm = alev;
        return;
    }

    /* alarm condition lolo */
    asev = prec->llsv;
    alev = prec->lolo;
    if (asev && (val <= alev || ((lalm == alev) && (val <= alev + hyst)))) {
        if (recGblSetSevr(prec, LOLO_ALARM, asev))
            prec->lalm = alev;
        return;
    }

    /* alarm condition high */
    asev = prec->hsv;
    alev = prec->high;
    if (asev && (val >= alev || ((lalm == alev) && (val >= alev - hyst)))) {
        if (recGblSetSevr(prec, HIGH_ALARM, asev))
            prec->lalm = alev;
        return;
    }

    /* alarm condition low */
    asev = prec->lsv;
    alev = prec->low;
    if (asev && (val <= alev || ((lalm == alev) && (val <= alev + hyst)))) {
        if (recGblSetSevr(prec, LOW_ALARM, asev))
            prec->lalm = alev;
        return;
    }

    /* we get here only if val is out of alarm by at least hyst */
    prec->lalm = val;
    return;
}

开发者ID:ukaea，项目名称:epics，代码行数:55，代码来源:selRecord.c

示例14: checkAlarms

static void checkAlarms(aliveRecord *prec)
{
  if (prec->udf == TRUE) 
    {
#if LT_EPICSBASE(3,15,0,2)
      recGblSetSevr(prec,UDF_ALARM,INVALID_ALARM);
#else
      recGblSetSevr(prec,UDF_ALARM,prec->udfs);
#endif
      return;
    }
  return;
}

开发者ID:epics-modules，项目名称:alive，代码行数:13，代码来源:aliveRecord.c

示例15: processAo

static long processAo(aoRecord *pr)
{
    devInt32Pvt *pPvt = (devInt32Pvt *)pr->dpvt;
    asynStatus status;
    double     value;
    
    if (getCallbackValue(pPvt)) {
        /* We got a callback from the driver */
        if (pPvt->result.status == asynSuccess) {
            pr->rval = pPvt->result.value;
            pr->udf = 0;
            value = (double)pr->rval + (double)pr->roff;
            if(pr->aslo!=0.0) value *= pr->aslo;
            value += pr->aoff;
            if (pr->linr == menuConvertNO_CONVERSION){
                ; /*do nothing*/
            } else if ((pr->linr == menuConvertLINEAR) ||
                       (pr->linr == menuConvertSLOPE)) {
                value = value*pr->eslo + pr->eoff;
            } else {
                if(cvtRawToEngBpt(&value,pr->linr,pr->init,
                        (void *)&pr->pbrk,&pr->lbrk)!=0) {
                    asynPrint(pPvt->pasynUser, ASYN_TRACE_ERROR,
                        "%s devAsynInt32 cvtRawToEngBpt failed\n",
                        pr->name);
                    (void)recGblSetSevr(pr, WRITE_ALARM, INVALID_ALARM);
                    return -1;
                }
            }
            pr->val = value;
            pr->udf = isnan(value);
        }
    } else if(pr->pact == 0) {
        pPvt->result.value = pr->rval;
        if(pPvt->canBlock) pr->pact = 1;
        status = pasynManager->queueRequest(pPvt->pasynUser, 0, 0);
        if((status==asynSuccess) && pPvt->canBlock) return 0;
        if(pPvt->canBlock) pr->pact = 0;
        reportQueueRequestStatus(pPvt, status);
    }
    if(pPvt->result.status == asynSuccess) {
        return 0;
    }
    else {
        pasynEpicsUtils->asynStatusToEpicsAlarm(pPvt->result.status, WRITE_ALARM, &pPvt->alarmStat,
                                                INVALID_ALARM, &pPvt->alarmSevr);
        (void)recGblSetSevr(pr, pPvt->alarmStat, pPvt->alarmSevr);
        pPvt->result.status = asynSuccess;
        return -1;
    }
}

开发者ID:ffeldbauer，项目名称:asyn，代码行数:51，代码来源:devAsynInt32.c

示例16: checkAlarms

static void checkAlarms(epidRecord *pepid)
{
    double      val;
    double      hyst, lalm, hihi, high, low, lolo;
    unsigned short  hhsv, llsv, hsv, lsv;

    if(pepid->udf == TRUE ) {
        recGblSetSevr(pepid,UDF_ALARM,INVALID_ALARM);
        return;
    }
    hihi = pepid->hihi;
    lolo = pepid->lolo;
    high = pepid->high;
    low = pepid->low;
    hhsv = pepid->hhsv;
    llsv = pepid->llsv;
    hsv = pepid->hsv;
    lsv = pepid->lsv;
    val = pepid->val;
    hyst = pepid->hyst;
    lalm = pepid->lalm;

    /* alarm condition hihi */
    if (hhsv && (val >= hihi || ((lalm==hihi) && (val >= hihi-hyst)))) {
        if (recGblSetSevr(pepid,HIHI_ALARM,pepid->hhsv)) pepid->lalm = hihi;
        return;
    }

    /* alarm condition lolo */
    if (llsv && (val <= lolo || ((lalm==lolo) && (val <= lolo+hyst)))) {
        if (recGblSetSevr(pepid,LOLO_ALARM,pepid->llsv)) pepid->lalm = lolo;
        return;
    }

    /* alarm condition high */
    if (hsv && (val >= high || ((lalm==high) && (val >= high-hyst)))) {
        if (recGblSetSevr(pepid,HIGH_ALARM,pepid->hsv)) pepid->lalm = high;
        return;
    }

    /* alarm condition low */
    if (lsv && (val <= low || ((lalm==low) && (val <= low+hyst)))) {
        if (recGblSetSevr(pepid,LOW_ALARM,pepid->lsv)) pepid->lalm = low;
        return;
    }

    /* we get here only if val is out of alarm by at least hyst */
    pepid->lalm = val;
    return;
}

开发者ID:epics-modules，项目名称:std，代码行数:50，代码来源:epidRecord.c

示例17: read_ai

static long read_ai(aiRecord *prec)
{
    devPvt *pdevPvt = (devPvt *)prec->dpvt;

    if (!prec->dpvt)
        return 2;

    if (!prec->pact) {
        dbProcessNotify(&pdevPvt->pn);
        prec->pact = TRUE;
        return 0;
    }

    if (pdevPvt->status) {
        recGblSetSevr(prec, READ_ALARM, INVALID_ALARM);
        pdevPvt->smooth = FALSE;
        return 2;
    }

    /* Apply smoothing algorithm */
    if (prec->smoo != 0.0 && pdevPvt->smooth && finite(prec->val))
        prec->val = prec->val * prec->smoo +
            pdevPvt->buffer.value * (1.0 - prec->smoo);
    else
        prec->val = pdevPvt->buffer.value;
    prec->udf = FALSE;
    pdevPvt->smooth = TRUE;

    switch (prec->inp.value.pv_link.pvlMask & pvlOptMsMode) {
        case pvlOptNMS:
            break;
        case pvlOptMSI:
            if (pdevPvt->buffer.severity < INVALID_ALARM)
                break;
            /* else fall through */
        case pvlOptMS:
            recGblSetSevr(prec, LINK_ALARM, pdevPvt->buffer.severity);
            break;
        case pvlOptMSS:
            recGblSetSevr(prec, pdevPvt->buffer.status,
                pdevPvt->buffer.severity);
            break;
    }

    if (prec->tsel.type == CONSTANT &&
        prec->tse == epicsTimeEventDeviceTime)
        prec->time = pdevPvt->buffer.time;
    return 2;
}

开发者ID:epicsdeb，项目名称:epics-base，代码行数:49，代码来源:devAiSoftCallback.c

示例18: processAo

static long processAo(aoRecord *pr)
{
    devInt32Pvt *pPvt = (devInt32Pvt *)pr->dpvt;
    asynStatus status;
    double     value;
    
    getCallbackValue(pPvt);
    if(pPvt->gotValue) {
        /* This code is for I/O Intr scanned output records, which are not tested yet. */
        pr->rval = pPvt->value;
        pr->udf = 0;
        value = (double)pr->rval + (double)pr->roff;
        if(pr->aslo!=0.0) value *= pr->aslo;
        value += pr->aoff;
        if (pr->linr == menuConvertNO_CONVERSION){
            ; /*do nothing*/
        } else if ((pr->linr == menuConvertLINEAR) ||
                  (pr->linr == menuConvertSLOPE)) {
            value = value*pr->eslo + pr->eoff;
        }else{
            if(cvtRawToEngBpt(&value,pr->linr,pr->init,
                    (void *)&pr->pbrk,&pr->lbrk)!=0) {
                asynPrint(pPvt->pasynUser, ASYN_TRACE_ERROR,
                    "%s devAsynInt32 cvtRawToEngBpt failed\n",
                    pr->name);
                recGblSetSevr(pr, READ_ALARM, INVALID_ALARM);
                goto done;
            }
        }
        pr->val = value;
        pr->udf = isnan(value);
    } else if(pr->pact == 0) {
        pPvt->value = pr->rval;
        if(pPvt->canBlock) pr->pact = 1;
        status = pasynManager->queueRequest(pPvt->pasynUser, 0, 0);
        if((status==asynSuccess) && pPvt->canBlock) return 0;
        if(pPvt->canBlock) pr->pact = 0;
        if(status != asynSuccess) {
            asynPrint(pPvt->pasynUser, ASYN_TRACE_ERROR,
                "%s devAsynInt32 queueRequest %s\n",
                pr->name,pPvt->pasynUser->errorMessage);
            recGblSetSevr(pr, WRITE_ALARM, INVALID_ALARM);
        }
    }
done:
    pPvt->gotValue = 0;
    return 0;
}

开发者ID:A2-Collaboration，项目名称:epics，代码行数:48，代码来源:devAsynInt32.c

示例19: process

static long process(compressRecord *prec)
{
    long	status=0;
    long	nelements = 0;
    int		alg = prec->alg;

    prec->pact = TRUE;
    if(!dbIsLinkConnected(&prec->inp)
    || dbGetNelements(&prec->inp,&nelements)
    || nelements<=0) {
	recGblSetSevr(prec,LINK_ALARM,INVALID_ALARM);
    } else {
	if(!prec->wptr || nelements!=prec->inpn) {
            if(prec->wptr) {
                free(prec->wptr);
                reset(prec);
            }
	    prec->wptr = (double *)dbCalloc(nelements,sizeof(double));
	    prec->inpn = nelements;
	}
	status = dbGetLink(&prec->inp,DBF_DOUBLE,prec->wptr,0,&nelements);
	if(status || nelements<=0) {
            recGblSetSevr(prec,LINK_ALARM,INVALID_ALARM);
	    status = 0;
	} else {
	    if(alg==compressALG_Average) {
		status = array_average(prec,prec->wptr,nelements);
	    } else if(alg==compressALG_Circular_Buffer) {
		(void)put_value(prec,prec->wptr,nelements);
		status = 0;
	    } else if(nelements>1) {
		status = compress_array(prec,prec->wptr,nelements);
	    }else if(nelements==1){
		status = compress_scalar(prec,prec->wptr);
	    }else status=1;
	}
    }
    /* check event list */
    if(status!=1) {
		prec->udf=FALSE;
		recGblGetTimeStamp(prec);
		monitor(prec);
		/* process the forward scan link record */
		recGblFwdLink(prec);
    }
    prec->pact=FALSE;
    return(0);
}

开发者ID:zlxmsu，项目名称:TestEpics，代码行数:48，代码来源:compressRecord.c

示例20: processAiAverage

static long processAiAverage(aiRecord *pai)
{
    devPvt *pPvt = (devPvt *)pai->dpvt;
    double dval;
    static const char *functionName="processAiAverage";

    epicsMutexLock(pPvt->devPvtLock);

    if (getCallbackValue(pPvt)) {
        /* Record is I/O Intr scanned and the average has been put in the ring buffer */
        dval = pPvt->result.value;
        pai->time = pPvt->result.time; 
    } else {        
        if (pPvt->numAverage == 0) {
            recGblSetSevr(pai, UDF_ALARM, INVALID_ALARM);
            pai->udf = 1;
            epicsMutexUnlock(pPvt->devPvtLock);
            return -2;
        }
        dval = pPvt->sum/pPvt->numAverage;
        pPvt->numAverage = 0;
        pPvt->sum = 0.;
    }
    epicsMutexUnlock(pPvt->devPvtLock);
    pasynEpicsUtils->asynStatusToEpicsAlarm(pPvt->result.status, 
                                            READ_ALARM, &pPvt->result.alarmStatus,
                                            INVALID_ALARM, &pPvt->result.alarmSeverity);
    recGblSetSevr(pai, pPvt->result.alarmStatus, pPvt->result.alarmSeverity);
    if (pPvt->result.status == asynSuccess) {
        /* ASLO/AOFF conversion */
        if (pai->aslo != 0.0) dval *= pai->aslo;
        dval += pai->aoff;
        /* Smoothing */
        if (pai->smoo == 0.0 || pai->udf || !finite(pai->val))
            pai->val = dval;
        else
            pai->val = pai->val * pai->smoo + dval * (1.0 - pai->smoo);
        pai->udf = 0;
        asynPrint(pPvt->pasynUser, ASYN_TRACEIO_DEVICE,
                  "%s %s::%s val=%f\n",
                  pai->name, driverName, functionName,pai->val);
        return 2;
    }
    else {
        pPvt->result.status = asynSuccess;
        return -1;
    }
}

开发者ID:epics-modules，项目名称:asyn，代码行数:48，代码来源:devAsynFloat64.c

注：本文中的recGblSetSevr函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ recalc函数代码示例发布时间：2022-05-30

C++ recGblRecordError函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17972|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9569|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8129|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8511|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8414|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9309|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8378|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7810|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8364|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7362|2022-11-06

客服电话

电子邮件

C++ recGblSetSevr函数代码示例

示例1: processAiAverage

示例2: alarm

示例3: readValue

示例4: writeString

示例5: processAiAverage

示例6: writeIt

示例7: writeValue

示例8: process

示例9: writeValue

示例10: readValue

示例11: process

示例12: inherit_severity

示例13: checkAlarms

示例14: checkAlarms

示例15: processAo

示例16: checkAlarms

示例17: read_ai

示例18: processAo

示例19: process

示例20: processAiAverage

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

zircote/swagger-php: A php swagger annot

美元符号为什么是“$”

TencentYoutuResearch/CrowdCounting-P2PNe

mmc-group/ML-for-materials-design

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053