C++ register_device函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中register_device函数的典型用法代码示例。如果您正苦于以下问题：C++ register_device函数的具体用法？C++ register_device怎么用？C++ register_device使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了register_device函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: eukrea_cpuimx25_devices_init

static int eukrea_cpuimx25_devices_init(void)
{
	eukrea_cpuimx25_mmu_init();

	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
		ARRAY_SIZE(eukrea_cpuimx25_pads));
	register_device(&fec_dev);

	nand_info.width = 1;
	register_device(&nand_dev);

	devfs_add_partition("nand0", 0x00000, 0x40000,
		PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");

	devfs_add_partition("nand0", 0x40000, 0x20000,
		PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	register_device(&sdram0_dev);

	/* enable LCD */
	gpio_direction_output(26, 1);
	gpio_set_value(26, 1);

	register_device(&imxfb_dev);

	armlinux_add_dram(&sdram0_dev);
	armlinux_set_bootparams((void *)0x80000100);
	armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25);

	return 0;
}

开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:33，代码来源:eukrea_cpuimx25.c

示例2: init_qsdk_module

void init_qsdk_module(void)
{
    dev_init_t uart;
    dev_init_t pmc;
    dev_init_t uotghs;
    dev_init_t arduino;

    uart.name = "arduinodue_uart";
    uart.dev_init = uart_init;
    uart.dev_inst = uart_inst;
    uart.dev_delete = NULL;
    register_device(&uart);

    pmc.name = "arduinodue_pmc";
    pmc.dev_init = pmc_init;
    pmc.dev_inst = pmc_inst;
    pmc.dev_delete = NULL;
    register_device(&pmc);

    uotghs.name = "arduinodue_uotghs";
    uotghs.dev_init = uotghs_init;
    uotghs.dev_inst = uotghs_inst;
    uotghs.dev_delete = NULL;
    register_device(&uotghs);

    arduino.name = "arduino_board";
    arduino.dev_init = arduino_board_init;
    arduino.dev_inst = arduino_board_inst;
    arduino.dev_delete = NULL;
    register_board(&arduino);
}

开发者ID:gabriel-cr，项目名称:device-repo，代码行数:31，代码来源:arduino_ep.c

示例3: nhk8815_devices_init

static int nhk8815_devices_init(void)
{
	st8815_add_device_sdram(64 * 1024 *1024);

	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);

	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
	writel(0x0000305b, FSMC_BCR(1));
	writel(0x00033f33, FSMC_BTR(1));

	register_device(&nhk8815_network_dev);

	register_device(&nhk8815_nand_device);

	armlinux_set_architecture(MACH_TYPE_NOMADIK);
	armlinux_set_bootparams((void *)(0x00000100));

	devfs_add_partition("nand0", 0x0000000, 0x040000, PARTITION_FIXED, "xloader_raw");
	devfs_add_partition("nand0", 0x0040000, 0x080000, PARTITION_FIXED, "meminit_raw");
	devfs_add_partition("nand0", 0x0080000, 0x200000, PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", 0x7FE0000, 0x020000, PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	return 0;
}

开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:29，代码来源:setup.c

示例4: scb9328_devices_init

static int scb9328_devices_init(void) {

	imx_gpio_mode(PA23_PF_CS5);

/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
	FMCR = 0x1;

	CS0U = 0x000F2000;
	CS0L = 0x11110d01;

	CS1U = 0x000F0a00;
	CS1L = 0x11110601;
	CS2U = 0x0;
	CS2L = 0x0;
	CS3U = 0x000FFFFF;
	CS3L = 0x00000303;
	CS4U = 0x000F0a00;
	CS4L = 0x11110301;
	CS5U = 0x00008400;
	CS5L = 0x00000D03;

	register_device(&cfi_dev);
	register_device(&sdram_dev);
	register_device(&dm9000_dev);

	devfs_add_partition("nor0", 0x00000, 0x20000, PARTITION_FIXED, "self0");
	devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
	protect_file("/dev/env0", 1);

	armlinux_add_dram(&sdram_dev);
	armlinux_set_bootparams((void *)0x08000100);
	armlinux_set_architecture(MACH_TYPE_SCB9328);

	return 0;
}

开发者ID:cwyy，项目名称:barebox，代码行数:35，代码来源:scb9328.c

示例5: devices_init

static int devices_init (void)
{
	register_device(&cfi_dev);
	register_device(&sdram_dev);
	register_device(&eth_dev);

	devfs_add_partition("nor0", 0x00f00000, 0x40000, PARTITION_FIXED, "self0");
	devfs_add_partition("nor0", 0x00f60000, 0x20000, PARTITION_FIXED, "env0");

	return 0;
}

开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:11，代码来源:pcm030.c

示例6: st8815_register_uart

void st8815_register_uart(unsigned id)
{
	switch (id) {
	case 0:
		nmdk_clk_create(&st8815_clk_48, dev_name(&uart0_serial_device));
		register_device(&uart0_serial_device);
		break;
	case 1:
		nmdk_clk_create(&st8815_clk_48, dev_name(&uart1_serial_device));
		register_device(&uart1_serial_device);
		break;
	}
}

开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:13，代码来源:8815.c

示例7: eukrea_cpuimx27_console_init

static int eukrea_cpuimx27_console_init(void)
{
#ifdef CONFIG_DRIVER_SERIAL_IMX
	register_device(&eukrea_cpuimx27_serial_device);
#endif
	/* configure 8 bit UART on cs3 */
	FMCR &= ~0x2;
	CS3U = 0x0000D603;
	CS3L = 0x0D1D0D01;
	CS3A = 0x00D20000;
#ifdef CONFIG_DRIVER_SERIAL_NS16550
	register_device(&quad_uart_serial_device);
#endif
	return 0;
}

开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:15，代码来源:eukrea_cpuimx27.c

示例8: connectionAuthSetTrustLevel

/****************************************************************************
NAME
	connectionAuthSetTrustLevel

FUNCTION
	This function is called to set the trust level of a device stored in the
    trusted device list.  The Blustack Security Manager is updated with the
    change.

RETURNS
	TRUE is record updated, otherwise FALSE
*/
uint16 connectionAuthSetTrustLevel(cl_dm_bt_version version, const bdaddr* peer_bd_addr, uint16 trusted)
{
    /* Holds the position of a device in the trusted device list (TDL) */
	uint16  rec = 0;
    TrustedDeviceRecordType record;
    
    /* Search for the device in the TDL */
	rec = find_trusted_device(peer_bd_addr);

	
	/* If the device is in the TDL */
	if(rec)
	{
		rec--;

		/* Read the record */
		(void)PsRetrieve(TRUSTED_DEVICE_LIST_BASE + rec, &record, sizeof(TrustedDeviceRecordType));

        /* Update the trust level */
        record.trusted = trusted;

        /* Store the record */
	    (void)PsStore(TRUSTED_DEVICE_LIST_BASE + rec, &record, sizeof(TrustedDeviceRecordType));

        /* Update Bluestack Security Manager Database */
        register_device(version, &record);
		
        /* Record updated */
        return TRUE;
    }

	
    /* Record for this device does not exist */
    return FALSE;
}

开发者ID:Duiesel，项目名称:thebirdfree-personal，代码行数:47，代码来源:dm_security_auth.c

示例9: main

int main() {
    ARMDevice uart;
    UARTInterface *inter;
    uart.base_addr = 0xFFFB0000;
    uart.size = sizeof(UARTInterface);
    strcpy(uart.name, "uart");

    if(register_device(&uart, &valueWritten, &uart) == -1) {
        perror("register_device");
        exit(1);
    }

    inter = (UARTInterface *)uart.memory;
    inter->US_IMR = 0x0;
    inter->US_RHR = 0x0;
    inter->US_BRGR = 0x0;
    inter->US_RTOR = 0x0;
    inter->US_TTGR = 0x0;
    inter->US_FIDI = 0x174;
    inter->US_IF = 0x0;

    while(1) {}

    return 0;
}

开发者ID:iamedu，项目名称:armdev，代码行数:25，代码来源:main.c

示例10: xzalloc

static struct state *state_new(const char *name)
{
	struct state *state;
	int ret;

	state = xzalloc(sizeof(*state));
	safe_strncpy(state->dev.name, name, MAX_DRIVER_NAME);
	state->name = state->dev.name;
	state->dev.id = DEVICE_ID_SINGLE;
	INIT_LIST_HEAD(&state->variables);

	ret = register_device(&state->dev);
	if (ret) {
		pr_err("Failed to register state device %s, %d\n", name, ret);
		free(state);
		return ERR_PTR(ret);
	}

	state->dirty = 1;
	dev_add_param_bool(&state->dev, "dirty", NULL, NULL, &state->dirty,
			   NULL);
	state->save_on_shutdown = 1;
	dev_add_param_bool(&state->dev, "save_on_shutdown", NULL, NULL,
			   &state->save_on_shutdown, NULL);

	list_add_tail(&state->list, &state_list);

	return state;
}

开发者ID:Tractorfirmware，项目名称:barebox，代码行数:29，代码来源:state.c

示例11: load_config

static int load_config(const char *config,PLISTINFO pDevList)
{
    FILE *fp = NULL;
    int cnt = 0;
    PLIST link = NULL;
    char so_name[256];
    fp = fopen(config,"r");
    if(!fp)     return -DEV_FAIL;
    while(1)
    {
       if(fgets(so_name,256,fp))
       {
          strip_illegal_char(so_name);
          if(so_name[0] == '#')
          {
              continue;
          }
          if(register_device(so_name) >= 0 && ++ cnt);
       }
       else
          break; 
    }
    fclose(fp);
    return cnt;
}

开发者ID:dongwencai，项目名称:DevManager，代码行数:25，代码来源:deviceManager.c

示例12: ubi_add_volume

/**
 * ubi_add_volume - add volume.
 * @ubi: UBI device description object
 * @vol: volume description object
 *
 * This function adds an existing volume and initializes all its data
 * structures. Returns zero in case of success and a negative error code in
 * case of failure.
 */
int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
{
	int err = 0;

	dbg_gen("add volume");

	sprintf(vol->dev.name, "%s.%s", dev_name(&ubi->dev), vol->name);
	vol->dev.id = DEVICE_ID_SINGLE;
	vol->dev.parent = &ubi->dev;
	err = register_device(&vol->dev);
	if (err)
		return err;

	/* Register character device for the volume */
	err = ubi_volume_cdev_add(ubi, vol);
	if (err) {
		ubi_err(ubi, "cannot add character device for volume, error %d",
			err);
		return err;
	}

	self_check_volumes(ubi);
	return err;

	return err;
}

开发者ID:cherojeong，项目名称:barebox，代码行数:35，代码来源:vmt.c

示例13: device_init

status_t device_init( int nDeviceID )
{
    int nError;
    int nHandle;
    printk( "Keyboard device: device_init() called\n" );

    g_sVolume.hWaitThread    = -1;
    atomic_set( &g_sVolume.nInPos, 0 );
    atomic_set( &g_sVolume.nOutPos, 0 );
    atomic_set( &g_sVolume.nBytesReceived, 0 );
    atomic_set( &g_sVolume.nOpenCount, 0 );
    g_sVolume.nIrqHandle	   = request_irq( 1, kbd_irq, NULL, 0, "keyboard_device", NULL );

    g_nKbdLedStatus = 0;
  
    if ( g_sVolume.nIrqHandle < 0 ) {
	printk( "ERROR : Failed to initiate keyboard interrupt handler\n" );
	return( g_sVolume.nIrqHandle );
    }
    
	nHandle = register_device( "", "system" );
	claim_device( nDeviceID, nHandle , "Keyboard", DEVICE_INPUT );
    nError = create_device_node( nDeviceID, nHandle, "keybd", &g_sOperations, NULL );
    
    return( nError );
}

开发者ID:PyroOS，项目名称:Pyro，代码行数:26，代码来源:kbd.c

示例14: mdiobus_register

/**
 * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
 * @bus: target mii_bus
 *
 * Description: Called by a bus driver to bring up all the PHYs
 *   on a given bus, and attach them to the bus.
 *
 * Returns 0 on success or < 0 on error.
 */
int mdiobus_register(struct mii_bus *bus)
{
	int err;

	if (NULL == bus ||
			NULL == bus->read ||
			NULL == bus->write)
		return -EINVAL;

	bus->dev.priv = bus;
	bus->dev.id = DEVICE_ID_DYNAMIC;
	strcpy(bus->dev.name, "miibus");
	bus->dev.parent = bus->parent;

	err = register_device(&bus->dev);
	if (err) {
		pr_err("mii_bus %s failed to register\n", bus->dev.name);
		return -EINVAL;
	}

	if (bus->reset)
		bus->reset(bus);

	pr_info("%s: probed\n", dev_name(&bus->dev));
	return 0;
}

开发者ID:Reggi3，项目名称:mini210s-barebox，代码行数:35，代码来源:mdio_bus.c

示例15: diskflat_device_register

void
diskflat_device_register(void)
{
    const char *device_prefix_list[] = { "diskflat", NULL };

    register_device(diskflat_device_factory, device_prefix_list);
}

开发者ID:martineau，项目名称:amanda，代码行数:7，代码来源:diskflat-device.c

示例16: register_watchdog

bool_t register_watchdog(struct watchdog_t * watchdog)
{
	struct device_t * dev;

	if(!watchdog || !watchdog->name)
		return FALSE;

	dev = malloc(sizeof(struct device_t));
	if(!dev)
		return FALSE;

	dev->name = strdup(watchdog->name);
	dev->type = DEVICE_TYPE_WATCHDOG;
	dev->suspend = watchdog_suspend;
	dev->resume = watchdog_resume;
	dev->driver = watchdog;
	dev->kobj = kobj_alloc_directory(dev->name);
	kobj_add_regular(dev->kobj, "timeout", watchdog_read_timeout, watchdog_write_timeout, watchdog);

	if(watchdog->init)
		(watchdog->init)(watchdog);

	if(watchdog->set)
		(watchdog->set)(watchdog, 0);

	if(!register_device(dev))
	{
		kobj_remove_self(dev->kobj);
		free(dev->name);
		free(dev);
		return FALSE;
	}

	return TRUE;
}

开发者ID:IngenicC，项目名称:xboot，代码行数:35，代码来源:watchdog.c

示例17: register_stepper

bool_t register_stepper(struct device_t ** device, struct stepper_t * m)
{
	struct device_t * dev;

	if(!m || !m->name)
		return FALSE;

	dev = malloc(sizeof(struct device_t));
	if(!dev)
		return FALSE;

	dev->name = strdup(m->name);
	dev->type = DEVICE_TYPE_STEPPER;
	dev->driver = NULL;
	dev->priv = m;
	dev->kobj = kobj_alloc_directory(dev->name);
	kobj_add_regular(dev->kobj, "enable", NULL, stepper_write_enable, m);
	kobj_add_regular(dev->kobj, "disable", NULL, stepper_write_disable, m);
	kobj_add_regular(dev->kobj, "move", NULL, stepper_write_move, m);
	kobj_add_regular(dev->kobj, "busying", stepper_read_busying, NULL, m);

	if(!register_device(dev))
	{
		kobj_remove_self(dev->kobj);
		free(dev->name);
		free(dev);
		return FALSE;
	}

	if(device)
		*device = dev;
	return TRUE;
}

开发者ID:xboot，项目名称:xboot，代码行数:33，代码来源:stepper.c

示例18: register_input

bool_t register_input(struct device_t ** device, struct input_t * input)
{
	struct device_t * dev;

	if(!input || !input->name)
		return FALSE;

	dev = malloc(sizeof(struct device_t));
	if(!dev)
		return FALSE;

	dev->name = strdup(input->name);
	dev->type = DEVICE_TYPE_INPUT;
	dev->driver = NULL;
	dev->priv = input;
	dev->kobj = kobj_alloc_directory(dev->name);

	if(!register_device(dev))
	{
		kobj_remove_self(dev->kobj);
		free(dev->name);
		free(dev);
		return FALSE;
	}

	if(device)
		*device = dev;
	return TRUE;
}

开发者ID:xboot，项目名称:xboot，代码行数:29，代码来源:input.c

示例19: nhk8815_devices_init

static int nhk8815_devices_init(void)
{
	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);

	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
	writel(0x0000305b, FSMC_BCR(1));
	writel(0x00033f33, FSMC_BTR(1));

	add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, 0x34000300, 16,
			   IORESOURCE_MEM, NULL);

	register_device(&nhk8815_nand_device);

	armlinux_set_architecture(MACH_TYPE_NOMADIK);
	armlinux_set_bootparams((void *)(0x00000100));

	devfs_add_partition("nand0", 0x0000000, 0x040000, DEVFS_PARTITION_FIXED, "xloader_raw");
	devfs_add_partition("nand0", 0x0040000, 0x080000, DEVFS_PARTITION_FIXED, "meminit_raw");
	devfs_add_partition("nand0", 0x0080000, 0x200000, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", 0x7FE0000, 0x020000, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	return 0;
}

开发者ID:caicry，项目名称:mini2440-barebox，代码行数:28，代码来源:setup.c

示例20: register_light

bool_t register_light(struct device_t ** device,struct light_t * light)
{
	struct device_t * dev;

	if(!light || !light->name)
		return FALSE;

	dev = malloc(sizeof(struct device_t));
	if(!dev)
		return FALSE;

	dev->name = strdup(light->name);
	dev->type = DEVICE_TYPE_LIGHT;
	dev->driver = NULL;
	dev->priv = light;
	dev->kobj = kobj_alloc_directory(dev->name);
	kobj_add_regular(dev->kobj, "illuminance", light_read_illuminance, NULL, light);

	if(!register_device(dev))
	{
		kobj_remove_self(dev->kobj);
		free(dev->name);
		free(dev);
		return FALSE;
	}

	if(device)
		*device = dev;
	return TRUE;
}

开发者ID:xboot，项目名称:xboot，代码行数:30，代码来源:light.c

注：本文中的register_device函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ register_dissector函数代码示例发布时间：2022-05-30

C++ register_cpu_notifier函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17972|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9569|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8129|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8511|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8414|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9309|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8378|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7810|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8364|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7362|2022-11-06

客服电话

电子邮件

C++ register_device函数代码示例

示例1: eukrea_cpuimx25_devices_init

示例2: init_qsdk_module

示例3: nhk8815_devices_init

示例4: scb9328_devices_init

示例5: devices_init

示例6: st8815_register_uart

示例7: eukrea_cpuimx27_console_init

示例8: connectionAuthSetTrustLevel

示例9: main

示例10: xzalloc

示例11: load_config

示例12: ubi_add_volume

示例13: device_init

示例14: mdiobus_register

示例15: diskflat_device_register

示例16: register_watchdog

示例17: register_stepper

示例18: register_input

示例19: nhk8815_devices_init

示例20: register_light

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

zircote/swagger-php: A php swagger annot

美元符号为什么是“$”

TencentYoutuResearch/CrowdCounting-P2PNe

mmc-group/ML-for-materials-design

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053