本文整理汇总了C++中reset函数的典型用法代码示例。如果您正苦于以下问题：C++ reset函数的具体用法？C++ reset怎么用？C++ reset使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了reset函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: hardStop
void SampleChannel::sum(int frame, bool running) {
if (wave == NULL || status & ~(STATUS_PLAY | STATUS_ENDING))
return;
if (frame != frameRewind) {
/* volume envelope, only if seq is running */
if (running) {
volume_i += volume_d;
if (volume_i < 0.0f)
volume_i = 0.0f;
else
if (volume_i > 1.0f)
volume_i = 1.0f;
}
/* fadein or fadeout processes. If mute, delete any signal. */
/** TODO - big issue: fade[in/out]Vol * internal_volume might be a
* bad choice: it causes glitches when muting on and off during a
* volume envelope. */
if (mute || mute_i) {
vChan[frame] = 0.0f;
vChan[frame+1] = 0.0f;
}
else
if (fadeinOn) {
if (fadeinVol < 1.0f) {
vChan[frame] *= fadeinVol * volume_i;
vChan[frame+1] *= fadeinVol * volume_i;
fadeinVol += 0.01f;
}
else {
fadeinOn = false;
fadeinVol = 0.0f;
}
}
else
if (fadeoutOn) {
if (fadeoutVol > 0.0f) { // fadeout ongoing
if (fadeoutType == XFADE) {
vChan[frame] *= volume_i;
vChan[frame+1] *= volume_i;
vChan[frame] = pChan[frame] * fadeoutVol * volume_i;
vChan[frame+1] = pChan[frame+1] * fadeoutVol * volume_i;
}
else {
vChan[frame] *= fadeoutVol * volume_i;
vChan[frame+1] *= fadeoutVol * volume_i;
}
fadeoutVol -= fadeoutStep;
}
else { // fadeout end
fadeoutOn = false;
fadeoutVol = 1.0f;
/* QWait ends with the end of the xfade */
if (fadeoutType == XFADE) {
qWait = false;
}
else {
if (fadeoutEnd == DO_MUTE)
mute = true;
else
if (fadeoutEnd == DO_MUTE_I)
mute_i = true;
else // DO_STOP
hardStop(frame);
}
}
}
else {
vChan[frame] *= volume_i;
vChan[frame+1] *= volume_i;
}
}
else {
if (mode & (SINGLE_BASIC | SINGLE_PRESS | SINGLE_RETRIG) ||
(mode == SINGLE_ENDLESS && status == STATUS_ENDING) ||
(mode & LOOP_ANY && !running)) // stop loops when the seq is off
{
status = STATUS_OFF;
}
/* temporary stop LOOP_ONCE not in ENDING status, otherwise they
* would return in wait, losing the ENDING status */
//if (mode == LOOP_ONCE && status != STATUS_ENDING)
if ((mode & (LOOP_ONCE | LOOP_ONCE_BAR)) && status != STATUS_ENDING)
status = STATUS_WAIT;
/* check for end of samples. SINGLE_ENDLESS runs forever unless
* it's in ENDING mode. */
reset(frame);
//.........这里部分代码省略.........
开发者ID:slegroux，项目名称:giada，代码行数:101，代码来源:sampleChannel.cpp
示例2: reset
void
PlaylistModel::setColumns (const QList<QString> &new_columns)
{
m_columns = new_columns;
reset ();
}
开发者ID:dsheeler，项目名称:esperanza-six600110，代码行数:6，代码来源:playlistmodel.cpp
示例3: ShaderCompileDesc
ShaderCompileDesc()
{
reset();
}
开发者ID:ming4883，项目名称:MingDx11Test，代码行数:4，代码来源:mdk_D3D11.cpp
示例4: reset
void WebPageImportanceSignals::onCommitLoad()
{
Platform::current()->histogramEnumeration("PageImportanceSignals.HadFormInteraction.OnCommitLoad", m_hadFormInteraction, 2);
reset();
}
开发者ID:smishenk，项目名称:chromium-crosswalk，代码行数:6，代码来源:WebPageImportanceSignals.cpp
示例5: remove
virtual void remove(unsigned long items) {
reset();
views.clear();
delete theModel;
reset();
}
开发者ID:sck，项目名称:oobench，代码行数:6，代码来源:MVCPerformance.cpp
示例6: QWidget
FilterBar::FilterBar(QWidget *parent)
: QWidget(parent)/*, m_blinkTimer(this), m_blinkedTimes(0)*/
{
QHBoxLayout *hBox = new QHBoxLayout(this, /*margin*/0, /*spacing*/0);
// Create every widgets:
// (Aaron Seigo says we don't need to worry about the
// "Toolbar group" stuff anymore.)
QIcon resetIconSet = KIcon("dialog-close", KIconLoader::global());
QIcon inAllIconSet = KIcon("edit-find", KIconLoader::global());
m_resetButton = new QToolButton(this);
m_resetButton->setIconSet(resetIconSet);
m_resetButton->setTextLabel(i18n("Reset Filter"));//, /*groupText=*/"", this, SLOT(reset()), 0);
m_resetButton->setAutoRaise(true);
//new KToolBarButton("locationbar_erase", /*id=*/1230, this, /*name=*/0, i18n("Reset Filter"));
m_lineEdit = new KLineEdit(this);
QLabel *label = new QLabel(m_lineEdit, i18n("&Filter: "), this);
m_tagsBox = new KComboBox(this);
QLabel *label2 = new QLabel(m_tagsBox, i18n("T&ag: "), this);
m_inAllBasketsButton = new QToolButton(this);
m_inAllBasketsButton->setIconSet(inAllIconSet);
m_inAllBasketsButton->setTextLabel(i18n("Filter All Baskets"));//, /*groupText=*/"", this, SLOT(inAllBaskets()), 0);
m_inAllBasketsButton->setAutoRaise(true);
// Configure the Tags combobox:
repopulateTagsCombo();
// Configure the Serach in all Baskets button:
m_inAllBasketsButton->setToggleButton(true);
// m_inAllBasketsButton->setOn(true);
// Global::bnpView->toggleFilterAllBaskets(true);
// m_lineEdit->setMaximumWidth(150);
m_lineEdit->setClearButtonShown(true);
// Layout all those widgets:
// hBox->addStretch();
hBox->addWidget(m_resetButton);
hBox->addSpacing(KDialog::spacingHint());
hBox->addWidget(label);
hBox->addWidget(m_lineEdit);
hBox->addSpacing(KDialog::spacingHint());
hBox->addWidget(label2);
hBox->addWidget(m_tagsBox);
hBox->addSpacing(KDialog::spacingHint());
hBox->addWidget(m_inAllBasketsButton);
m_data = new FilterData(); // TODO: Not a pointer! and return a const & !!
// connect( &m_blinkTimer, SIGNAL(timeout()), this, SLOT(blinkBar()) );
connect( m_resetButton, SIGNAL(clicked()), this, SLOT(reset()) );
connect( m_lineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(changeFilter()) );
connect( m_tagsBox, SIGNAL(activated(int)), this, SLOT(tagChanged(int)) );
// connect( m_inAllBasketsButton, SIGNAL(clicked()), this, SLOT(inAllBaskets()) );
connect( m_inAllBasketsButton, SIGNAL(toggled(bool)), Global::bnpView, SLOT(toggleFilterAllBaskets(bool)) );
FocusWidgetFilter *lineEditF = new FocusWidgetFilter(m_lineEdit);
m_tagsBox->installEventFilter(lineEditF);
connect(lineEditF, SIGNAL(escapePressed()), SLOT(reset()));
connect(lineEditF, SIGNAL(returnPressed()), SLOT(changeFilter()));
}
开发者ID:jesper，项目名称:basket，代码行数:64，代码来源:filter.cpp
示例7: reset
AP_Gimbal_Parameters::AP_Gimbal_Parameters()
{
reset();
}
开发者ID:raulshepherd，项目名称:ardupilot-solo，代码行数:4，代码来源:AP_Gimbal_Parameters.cpp
示例8: reset
AsyncConnection::~AsyncConnection() {
reset();
}
开发者ID:JWUST，项目名称:hyrise，代码行数:3，代码来源:AsyncConnection.cpp
示例9:
uint16_t ILI9341_kbv::readID(void) //{ return 0x9341; }
{
if (!done_reset) reset();
return (readcommand8(0xD3, 2) << 8) | readcommand8(0xD3, 3);
}
开发者ID:prenticedavid，项目名称:TFT_SPI_kbv，代码行数:5，代码来源:ILI9341_kbv.cpp
示例10: assign
any& assign(const T& x) {
reset();
policy = anyimpl::get_policy<T>();
policy->copy_from_value(&x, &object);
return *this;
}
开发者ID:ascetic85，项目名称:ziwei，代码行数:6，代码来源:any.hpp
示例11: reset
Authenticator::~Authenticator() {
reset();
}
开发者ID:KristofRobot，项目名称:ZoneMinder，代码行数:3，代码来源:zm_rtsp_auth.cpp
示例12: reset
void PreviewMatrix::clear()
{
d_matrix_model->clear();
reset();
}
开发者ID:BackupTheBerlios，项目名称:qtiplot-svn，代码行数:5，代码来源:ImportASCIIDialog.cpp
示例13: switch
void SampleChannel::start(int frame, bool doQuantize) {
switch (status) {
case STATUS_EMPTY:
case STATUS_MISSING:
case STATUS_WRONG:
{
return;
}
case STATUS_OFF:
{
if (mode & LOOP_ANY) {
status = STATUS_WAIT;
}
else {
if (G_Mixer.quantize > 0 && G_Mixer.running && doQuantize)
qWait = true;
else {
/* fillChan only if frame != 0. If you call fillChan on frame == 0
* a duplicate call to fillChan occurs with loss of data. */
status = STATUS_PLAY;
if (frame != 0)
tracker = fillChan(vChan, tracker, frame);
}
}
break;
}
case STATUS_PLAY:
{
if (mode == SINGLE_BASIC)
setFadeOut(DO_STOP);
else
if (mode == SINGLE_RETRIG) {
if (G_Mixer.quantize > 0 && G_Mixer.running && doQuantize)
qWait = true;
else
reset(frame);
}
else
if (mode & (LOOP_ANY | SINGLE_ENDLESS))
status = STATUS_ENDING;
break;
}
case STATUS_WAIT:
{
status = STATUS_OFF;
break;
}
case STATUS_ENDING:
{
status = STATUS_PLAY;
break;
}
}
}
开发者ID:slegroux，项目名称:giada，代码行数:61，代码来源:sampleChannel.cpp
示例14: hashtable
hashtable() :
itable(new std::array< std::pair<uint64_t, uint32_t>, TABLE_SIZE >),
table(*itable)
{
reset();
}
开发者ID:4Ykw，项目名称:keyhotee，代码行数:6，代码来源:hashtable.hpp
示例15: reset
/* Construct a MD5 object with a file. */
MD5::MD5(ifstream &in) {
reset();
update(in);
}
开发者ID:ALEXLCC，项目名称:T3000_Building_Automation_System，代码行数:5，代码来源:md5.cpp
示例16: remove
virtual void remove(Container& theContainer) {
reset();
theContainer.clear();
reset();
}
开发者ID:sck，项目名称:oobench，代码行数:5，代码来源:SetPerformance.cpp
示例17: reset
//! constructor
ZWW::ZWW(){
reset();
}
开发者ID:latinos，项目名称:LatinoAnalysis，代码行数:4，代码来源:ZWWVar.C
示例18: reset
~PatternReseter() {
reset();
}
开发者ID:kssreeram，项目名称:clay-old，代码行数:3，代码来源:matchinvoke.cpp
示例19: load
/* loads the game from save.dat */
char load()
{
//LOAD FILE
int loadversion;
int l;
bool dummy_b;
int dummy;
long dummy_l;
FILE *h;
h=LCSOpenFile("save.dat", "rb", LCSIO_PRE_HOME);
if(h!=NULL)
{
fread(&loadversion,sizeof(int),1,h);
//NUKE INVALID SAVE GAMES
if(loadversion<lowestloadversion)
{
LCSCloseFile(h);
reset();
return 0;
}
fread(seed,sizeof(unsigned long),RNG_SIZE,h);
fread(&mode,sizeof(short),1,h);
fread(&wincondition,sizeof(short),1,h);
fread(&fieldskillrate,sizeof(short),1,h);
fread(&day,sizeof(int),1,h);
fread(&month,sizeof(int),1,h);
fread(&year,sizeof(int),1,h);
fread(&execterm,sizeof(short),1,h);
fread(&presparty,sizeof(short),1,h);
fread(&amendnum,sizeof(int),1,h);
fread(&multipleCityMode,sizeof(bool),1,h);
fread(&termlimits,sizeof(bool),1,h);
fread(&deagle,sizeof(bool),1,h);
fread(&m249,sizeof(bool),1,h);
fread(¬ermlimit,sizeof(bool),1,h);
fread(&nocourtpurge,sizeof(bool),1,h);
fread(&stalinmode,sizeof(bool),1,h);
fread(&stat_recruits,sizeof(int),1,h);
fread(&stat_dead,sizeof(int),1,h);
fread(&stat_kills,sizeof(int),1,h);
fread(&stat_kidnappings,sizeof(int),1,h);
fread(&stat_buys,sizeof(int),1,h);
fread(&stat_burns,sizeof(int),1,h);
fread(&endgamestate,sizeof(char),1,h);
fread(&ccsexposure,sizeof(char),1,h);
fread(&ccs_kills,sizeof(char),1,h);
fread(&Vehicle::curcarid,sizeof(long),1,h);
fread(&curcreatureid,sizeof(long),1,h);
fread(&cursquadid,sizeof(long),1,h);
fread(&police_heat,sizeof(int),1,h);
fread(&offended_corps,sizeof(short),1,h);
fread(&offended_cia,sizeof(short),1,h);
fread(&offended_amradio,sizeof(short),1,h);
fread(&offended_cablenews,sizeof(short),1,h);
fread(&offended_firemen,sizeof(short),1,h);
fread(attorneyseed,sizeof(unsigned long),RNG_SIZE,h);
//fread(&selectedsiege,sizeof(long),1,h);
fread(lcityname,sizeof(char),CITY_NAMELEN,h);
fread(&newscherrybusted,sizeof(char),1,h);
fread(slogan,sizeof(char),SLOGAN_LEN,h);
fread(&ledger,sizeof(class Ledger),1,h);
fread(&party_status,sizeof(short),1,h);
fread(attitude,sizeof(short),VIEWNUM,h);
fread(law,sizeof(short),LAWNUM,h);
fread(house,sizeof(short),HOUSENUM,h);
fread(senate,sizeof(short),SENATENUM,h);
fread(court,sizeof(short),COURTNUM,h);
fread(courtname,sizeof(char)*POLITICIAN_NAMELEN,COURTNUM,h);
fread(exec,sizeof(char),EXECNUM,h);
fread(execname,sizeof(char)*POLITICIAN_NAMELEN,EXECNUM,h);
fread(oldPresidentName,sizeof(char),POLITICIAN_NAMELEN,h);
//LOCATIONS
fread(&dummy,sizeof(int),1,h);
location.resize(dummy);
for(l=0;l<len(location);l++)
{
location[l]=new Location;
fread(&dummy,sizeof(int),1,h);
location[l]->loot.resize(dummy);
for(int l2=0;l2<len(location[l]->loot);l2++)
{
int itemLen;
fread(&itemLen, sizeof(int), 1, h);
vector<char> vec = vector<char>(itemLen + 1);
//.........这里部分代码省略.........
开发者ID:pip12345，项目名称:lcs-enhanced，代码行数:101，代码来源:saveload.cpp
示例20: reset
TreeView::~TreeView()
{
m_pModel->clear();
reset();
};
开发者ID:theidealist，项目名称:developerDebugDisplay，代码行数:5，代码来源:TreeView.cpp
注：本文中的reset函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论