本文整理汇总了C++中rl_printf函数的典型用法代码示例。如果您正苦于以下问题：C++ rl_printf函数的具体用法？C++ rl_printf怎么用？C++ rl_printf使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了rl_printf函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: read_reply
static void read_reply(DBusMessage *message, void *user_data)
{
DBusError error;
DBusMessageIter iter, array;
uint8_t *value;
int len;
dbus_error_init(&error);
if (dbus_set_error_from_message(&error, message) == TRUE) {
rl_printf("Failed to read: %s\n", error.name);
dbus_error_free(&error);
return;
}
dbus_message_iter_init(message, &iter);
if (dbus_message_iter_get_arg_type(&iter) != DBUS_TYPE_ARRAY) {
rl_printf("Invalid response to read\n");
return;
}
dbus_message_iter_recurse(&iter, &array);
dbus_message_iter_get_fixed_array(&array, &value, &len);
if (len < 0) {
rl_printf("Unable to parse value\n");
return;
}
rl_hexdump(value, len);
}
开发者ID:Hibati，项目名称:gatt，代码行数:32，代码来源:gatt.c
示例2: gatt_register_profile
void gatt_register_profile(DBusConnection *conn, GDBusProxy *proxy,
wordexp_t *w)
{
GList *l;
l = g_list_find_custom(managers, proxy, match_proxy);
if (!l) {
rl_printf("Unable to find GattManager proxy\n");
return;
}
if (g_dbus_register_interface(conn, PROFILE_PATH,
PROFILE_INTERFACE, methods,
NULL, NULL, NULL, NULL) == FALSE) {
rl_printf("Failed to register profile object\n");
return;
}
if (g_dbus_proxy_method_call(l->data, "RegisterProfile",
register_profile_setup,
register_profile_reply, w,
NULL) == FALSE) {
rl_printf("Failed register profile\n");
return;
}
}
开发者ID:Hibati，项目名称:gatt，代码行数:26，代码来源:gatt.c
示例3: read_attribute
static void read_attribute(GDBusProxy *proxy)
{
if (g_dbus_proxy_method_call(proxy, "ReadValue", NULL, read_reply,
NULL, NULL) == FALSE) {
rl_printf("Failed to read\n");
return;
}
rl_printf("Attempting to read %s\n", g_dbus_proxy_get_path(proxy));
}
开发者ID:anupdw，项目名称:android-bluez.bluez，代码行数:10，代码来源:gatt.c
示例4: register_profile_reply
static void register_profile_reply(DBusMessage *message, void *user_data)
{
DBusError error;
dbus_error_init(&error);
if (dbus_set_error_from_message(&error, message) == TRUE) {
rl_printf("Failed to register profile: %s\n", error.name);
dbus_error_free(&error);
return;
}
rl_printf("Profile registered\n");
}
开发者ID:Hibati，项目名称:gatt，代码行数:14，代码来源:gatt.c
示例5: ReadLineTtyUnset
/*
* Undo changes to tty mode
*/
void ReadLineTtyUnset (void)
{
#if HAVE_TCGETATTR
if (!tty_saved)
return;
if (tcsetattr (STDIN_FILENO, TCSAFLUSH, &tty_saved_attr) != 0)
{
rl_printf ("%s%s%s ", COLERROR, i18n (1619, "Warning:"), COLNONE);
rl_printf (i18n (2524, "Can't restore terminal modes.\n"));
}
else
tty_saved = 0;
#endif
}
开发者ID:egphilippov，项目名称:buguldey-ai-foss，代码行数:18，代码来源:util_rl.c
示例6: char_read_cb
static void char_read_cb(guint8 status, const guint8 *pdu, guint16 plen,
gpointer user_data)
{
uint8_t value[plen];
ssize_t vlen;
int i;
GString *s;
if (status != 0) {
error("Characteristic value/descriptor read failed: %s\n",
att_ecode2str(status));
return;
}
vlen = dec_read_resp(pdu, plen, value, sizeof(value));
if (vlen < 0) {
error("Protocol error\n");
return;
}
s = g_string_new("Characteristic value/descriptor: ");
for (i = 0; i < vlen; i++)
g_string_append_printf(s, "%02x ", value[i]);
rl_printf("%s\n", s->str);
g_string_free(s, TRUE);
}
开发者ID:RebornProject，项目名称:android_hardware_semc，代码行数:27，代码来源:interactive.c
示例7: PeerFileAccept
/*
* Checks the file request response.
*/
BOOL PeerFileAccept (Connection *peer, UWORD ackstatus, UDWORD port)
{
Connection *flist, *fpeer;
flist = PeerFileCreate (peer->serv);
fpeer = ServerFindChild (flist->serv, peer->cont, TYPE_FILEDIRECT);
if (!flist || !fpeer || !port || (ackstatus == TCP_ACK_REFUSE))
{
if (fpeer)
TCPClose (fpeer);
return 0;
}
ASSERT_MSGDIRECT(peer);
ASSERT_FILELISTEN(flist);
ASSERT_FILEDIRECT(fpeer);
fpeer->connect = 0;
fpeer->oscar_dc_seq = 0;
fpeer->port = port;
fpeer->ip = peer->ip;
s_repl (&fpeer->server, s_ip (fpeer->ip));
if (prG->verbose)
rl_printf (i18n (2520, "Opening file transfer connection to %s:%s%ld%s... \n"),
s_wordquote (fpeer->server), COLQUOTE, UD2UL (fpeer->port), COLNONE);
TCPDispatchConn (fpeer);
return 1;
}
开发者ID:tadu，项目名称:climm，代码行数:36，代码来源:oscar_dc_file.c
示例8: connect_cb
static void connect_cb(GIOChannel *io, GError *err, gpointer user_data)
{
uint16_t mtu;
uint16_t cid;
if (err) {
set_state(STATE_DISCONNECTED);
error("%s\n", err->message);
return;
}
bt_io_get(io, &err, BT_IO_OPT_IMTU, &mtu,
BT_IO_OPT_CID, &cid, BT_IO_OPT_INVALID);
if (err) {
g_printerr("Can't detect MTU, using default: %s", err->message);
g_error_free(err);
mtu = ATT_DEFAULT_LE_MTU;
}
if (cid == ATT_CID)
mtu = ATT_DEFAULT_LE_MTU;
attrib = g_attrib_new(iochannel, mtu, false);
g_attrib_register(attrib, ATT_OP_HANDLE_NOTIFY, GATTRIB_ALL_HANDLES,
events_handler, attrib, NULL);
g_attrib_register(attrib, ATT_OP_HANDLE_IND, GATTRIB_ALL_HANDLES,
events_handler, attrib, NULL);
set_state(STATE_CONNECTED);
rl_printf("Connection successful\n");
}
开发者ID:ghent360，项目名称:bluez，代码行数:31，代码来源:interactive.c
示例9: cmd_mtu
static void cmd_mtu(int argcp, char **argvp)
{
if (conn_state != STATE_CONNECTED) {
failed("Disconnected\n");
return;
}
if (opt_psm) {
failed("Operation is only available for LE transport.\n");
return;
}
if (argcp < 2) {
rl_printf("Usage: mtu <value>\n");
return;
}
if (opt_mtu) {
failed("MTU exchange can only occur once per connection.\n");
return;
}
errno = 0;
opt_mtu = strtoll(argvp[1], NULL, 0);
if (errno != 0 || opt_mtu < ATT_DEFAULT_LE_MTU) {
error("Invalid value. Minimum MTU size is %d\n",
ATT_DEFAULT_LE_MTU);
return;
}
gatt_exchange_mtu(attrib, opt_mtu, exchange_mtu_cb, NULL);
}
开发者ID:Hibati，项目名称:actuator，代码行数:32，代码来源:interactive.c
示例10: cmd_anki_vehicle_sdk_mode
static void cmd_anki_vehicle_sdk_mode(int argcp, char **argvp)
{
uint8_t *value;
size_t plen;
int handle;
if (conn_state != STATE_CONNECTED) {
failed("Disconnected\n");
return;
}
if (argcp < 2) {
rl_printf("Usage: %s <new value>\n", argvp[0]);
return;
}
handle = vehicle.write_char.value_handle;
int arg = atoi(argvp[1]);
anki_vehicle_msg_t msg;
plen = anki_vehicle_msg_set_sdk_mode(&msg, arg);
value = (uint8_t *)&msg;
gatt_write_char(attrib, handle, value, plen,
NULL, NULL);
}
开发者ID:kloepper，项目名称:drive-sdk，代码行数:27，代码来源:vehicle_cmd.c
示例11: assert
/*
* Create a new file listener unless one already exists.
*/
Connection *PeerFileCreate (Server *serv)
{
Connection *flist;
assert (serv);
if (!serv->oscar_dc || serv->oscar_dc->version < 6)
return NULL;
if ((flist = ServerFindChild (serv, NULL, TYPE_FILELISTEN)))
return flist;
flist = ServerChild (serv, NULL, TYPE_FILELISTEN);
if (!flist)
return NULL;
flist->oscar_dc_seq = -1;
flist->version = serv->oscar_dc->version;
flist->cont = serv->oscar_dc->cont;
flist->port = ServerPrefVal (serv, CO_OSCAR_DC_PORT);
flist->dispatch = &TCPDispatchMain;
if (prG->verbose)
rl_printf (i18n (2519, "Opening file listener connection at %slocalhost%s:%s%ld%s... "),
COLQUOTE, COLNONE, COLQUOTE, UD2UL (flist->port), COLNONE);
UtilIOListenTCP (flist);
return flist;
}
开发者ID:tadu，项目名称:climm，代码行数:33，代码来源:oscar_dc_file.c
示例12: notify_reply
static void notify_reply(DBusMessage *message, void *user_data)
{
bool enable = GPOINTER_TO_UINT(user_data);
DBusError error;
dbus_error_init(&error);
if (dbus_set_error_from_message(&error, message) == TRUE) {
rl_printf("Failed to %s notify: %s\n",
enable ? "start" : "stop", error.name);
dbus_error_free(&error);
return;
}
rl_printf("Notify %s\n", enable == TRUE ? "started" : "stopped");
}
开发者ID:anupdw，项目名称:android-bluez.bluez，代码行数:16，代码来源:gatt.c
示例13: cmd_anki_vehicle_write
static void cmd_anki_vehicle_write(int argcp, char **argvp)
{
uint8_t *value;
size_t plen;
int handle;
if (conn_state != STATE_CONNECTED) {
failed("Disconnected\n");
return;
}
if (argcp < 2) {
rl_printf("Usage: %s <handle> <new value>\n", argvp[0]);
return;
}
handle = vehicle.write_char.value_handle;
plen = gatt_attr_data_from_string(argvp[1], &value);
if (plen == 0) {
error("Invalid value\n");
return;
}
if (g_strcmp0("send-data-req", argvp[0]) == 0)
gatt_write_char(attrib, handle, value, plen,
char_write_req_cb, NULL);
else
gatt_write_cmd(attrib, handle, value, plen, NULL, NULL);
g_free(value);
}
开发者ID:kloepper，项目名称:drive-sdk，代码行数:32，代码来源:vehicle_cmd.c
示例14: cmd_connect
static void cmd_connect(int argcp, char **argvp)
{
GError *gerr = NULL;
if (conn_state != STATE_DISCONNECTED)
return;
if (argcp > 1) {
g_free(opt_dst);
opt_dst = g_strdup(argvp[1]);
g_free(opt_dst_type);
if (argcp > 2)
opt_dst_type = g_strdup(argvp[2]);
else
opt_dst_type = g_strdup("public");
}
if (opt_dst == NULL) {
error("Remote Bluetooth address required\n");
return;
}
rl_printf("Attempting to connect to %s\n", opt_dst);
set_state(STATE_CONNECTING);
iochannel = gatt_connect(opt_src, opt_dst, opt_dst_type, opt_sec_level,
opt_psm, opt_mtu, connect_cb, &gerr);
if (iochannel == NULL) {
set_state(STATE_DISCONNECTED);
error("%s\n", gerr->message);
g_error_free(gerr);
} else
g_io_add_watch(iochannel, G_IO_HUP, channel_watcher, NULL);
}
开发者ID:Hibati，项目名称:actuator，代码行数:34，代码来源:interactive.c
示例15: char_read_by_uuid_cb
static void char_read_by_uuid_cb(guint8 status, const guint8 *pdu,
guint16 plen, gpointer user_data)
{
struct att_data_list *list;
int i;
GString *s;
if (status != 0) {
error("Read characteristics by UUID failed: %s\n",
att_ecode2str(status));
return;
}
list = dec_read_by_type_resp(pdu, plen);
if (list == NULL)
return;
s = g_string_new(NULL);
for (i = 0; i < list->num; i++) {
uint8_t *value = list->data[i];
int j;
g_string_printf(s, "handle: 0x%04x \t value: ",
get_le16(value));
value += 2;
for (j = 0; j < list->len - 2; j++, value++)
g_string_append_printf(s, "%02x ", *value);
rl_printf("%s\n", s->str);
}
att_data_list_free(list);
g_string_free(s, TRUE);
}
开发者ID:Hibati，项目名称:actuator，代码行数:34，代码来源:interactive.c
示例16: cmd_help
static void cmd_help(int argcp, char **argvp)
{
int i;
for (i = 0; commands[i].cmd; i++)
rl_printf("%-15s %-30s %s\n", commands[i].cmd,
commands[i].params, commands[i].desc);
}
开发者ID:Hibati，项目名称:actuator，代码行数:8，代码来源:interactive.c
示例17: unregister_profile_reply
static void unregister_profile_reply(DBusMessage *message, void *user_data)
{
DBusConnection *conn = user_data;
DBusError error;
dbus_error_init(&error);
if (dbus_set_error_from_message(&error, message) == TRUE) {
rl_printf("Failed to unregister profile: %s\n", error.name);
dbus_error_free(&error);
return;
}
rl_printf("Profile unregistered\n");
g_dbus_unregister_interface(conn, PROFILE_PATH, PROFILE_INTERFACE);
}
开发者ID:Hibati，项目名称:gatt，代码行数:17，代码来源:gatt.c
示例18: ad_advertise_manufacturer
void ad_advertise_manufacturer(const char *arg)
{
wordexp_t w;
unsigned int i;
char *endptr = NULL;
long int val;
if (wordexp(arg, &w, WRDE_NOCMD)) {
rl_printf("Invalid argument\n");
return;
}
ad_clear_manufacturer();
if (w.we_wordc == 0)
goto done;
val = strtol(w.we_wordv[0], &endptr, 0);
if (!endptr || *endptr != '\0' || val > UINT16_MAX) {
rl_printf("Invalid manufacture id\n");
goto done;
}
ad_manufacturer_id = val;
for (i = 1; i < w.we_wordc; i++) {
if (i >= G_N_ELEMENTS(ad_service_data)) {
rl_printf("Too much data\n");
goto done;
}
val = strtol(w.we_wordv[i], &endptr, 0);
if (!endptr || *endptr != '\0' || val > UINT8_MAX) {
rl_printf("Invalid value at index %d\n", i);
ad_clear_service();
goto done;
}
ad_manufacturer_data[ad_manufacturer_data_len] = val;
ad_manufacturer_data_len++;
}
done:
wordfree(&w);
}
开发者ID:luetzel，项目名称:bluez，代码行数:45，代码来源:advertising.c
示例19: gatt_unregister_profile
void gatt_unregister_profile(DBusConnection *conn, GDBusProxy *proxy)
{
GList *l;
l = g_list_find_custom(managers, proxy, match_proxy);
if (!l) {
rl_printf("Unable to find GattManager proxy\n");
return;
}
if (g_dbus_proxy_method_call(l->data, "UnregisterProfile",
unregister_profile_setup,
unregister_profile_reply, conn,
NULL) == FALSE) {
rl_printf("Failed unregister profile\n");
return;
}
}
开发者ID:Hibati，项目名称:gatt，代码行数:18，代码来源:gatt.c
示例20: rl_printf
static DBusMessage *release_advertising(DBusConnection *conn,
DBusMessage *msg, void *user_data)
{
rl_printf("Advertising released\n");
ad_release(conn);
return dbus_message_new_method_return(msg);
}
开发者ID:luetzel，项目名称:bluez，代码行数:9，代码来源:advertising.c
注：本文中的rl_printf函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论