C++ rpl_set_prefix函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rpl_set_prefix函数的典型用法代码示例。如果您正苦于以下问题：C++ rpl_set_prefix函数的具体用法？C++ rpl_set_prefix怎么用？C++ rpl_set_prefix使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rpl_set_prefix函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cetic_6lbr_set_prefix

/*---------------------------------------------------------------------------*/
void
cetic_6lbr_set_prefix(uip_ipaddr_t * prefix, unsigned len,
                      uip_ipaddr_t * ipaddr)
{
#if CETIC_6LBR_SMARTBRIDGE
  int new_prefix = !uip_ipaddr_prefixcmp(&wsn_net_prefix, prefix, len);
  int new_dag_prefix = cetic_dag == NULL || !uip_ipaddr_prefixcmp(&cetic_dag->prefix_info.prefix, prefix, len);
  if((nvm_data.mode & CETIC_MODE_WAIT_RA_MASK) == 0) {
    LOG6LBR_DEBUG("Ignoring RA\n");
    return;
  }

  if(new_prefix) {
    LOG6LBR_6ADDR(INFO, prefix, "Setting prefix : ");
    uip_ipaddr_copy(&wsn_ip_addr, ipaddr);
    uip_ipaddr_copy(&wsn_net_prefix, prefix);
    wsn_net_prefix_len = len;
    LOG6LBR_6ADDR(INFO, &wsn_ip_addr, "Tentative global IPv6 address : ");
#if CONTIKI_TARGET_NATIVE
  cetic_6lbr_save_ip();
#endif
  }
  if(new_dag_prefix) {
    if((nvm_data.rpl_config & CETIC_6LBR_MODE_GLOBAL_DODAG) != 0) {
      cetic_dag = rpl_set_root(nvm_data.rpl_instance_id, &wsn_ip_addr);
      rpl_set_prefix(cetic_dag, prefix, len);
      LOG6LBR_6ADDR(INFO, &cetic_dag->dag_id, "Configured as DODAG Root ");
    } else {
      rpl_set_prefix(cetic_dag, prefix, len);
      LOG6LBR_6ADDR(INFO, prefix, "Setting DAG prefix : ");
      rpl_repair_root(RPL_DEFAULT_INSTANCE);
    }
  }
#endif
}

开发者ID:kamejoko80，项目名称:6lbr，代码行数:36，代码来源:cetic-6lbr.c

示例2: set_own_addresses

/*---------------------------------------------------------------------------*/
static void
set_own_addresses(void)
{
  int i;
  uint8_t state;
  rpl_dag_t *dag;
  uip_ipaddr_t ipaddr;

  uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
  uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
  uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);

  PRINTF("Our IPv6 addresses:\n");
  for(i = 0; i < UIP_DS6_ADDR_NB; i++) {
    state = uip_ds6_if.addr_list[i].state;
    if(uip_ds6_if.addr_list[i].isused && (state == ADDR_TENTATIVE || state
        == ADDR_PREFERRED)) {
      PRINTF("  ");
      PRINT6ADDR(&uip_ds6_if.addr_list[i].ipaddr);
      PRINTF("\n");
      if(state == ADDR_TENTATIVE) {
        uip_ds6_if.addr_list[i].state = ADDR_PREFERRED;
      }
    }
  }

  /* Become root of a new DODAG with ID our global v6 address */
  dag = rpl_set_root(RPL_DEFAULT_INSTANCE, &ipaddr);
  if(dag != NULL) {
    rpl_set_prefix(dag, &ipaddr, 64);
    PRINTF("Created a new RPL dag with ID: ");
    PRINT6ADDR(&dag->dag_id);
    PRINTF("\n");
  }
}

开发者ID:200018171，项目名称:contiki，代码行数:36，代码来源:root.c

示例3: cetic_6lbr_set_prefix

void
cetic_6lbr_set_prefix(uip_ipaddr_t * prefix, unsigned len,
                      uip_ipaddr_t * ipaddr)
{
#if CETIC_6LBR_SMARTBRIDGE
  int new_prefix = cetic_dag != NULL && !uip_ipaddr_prefixcmp(&cetic_dag->prefix_info.prefix, prefix, len);
  if((nvm_data.mode & CETIC_MODE_WAIT_RA_MASK) == 0) {
    LOG6LBR_DEBUG("Ignoring RA\n");
    return;
  }
  LOG6LBR_INFO("CETIC_BRIDGE : set_prefix\n");

  uip_ipaddr_copy(&wsn_ip_addr, ipaddr);

  if(cetic_dag != NULL) {
    rpl_set_prefix(cetic_dag, prefix, len);
    uip_ipaddr_copy(&wsn_net_prefix, prefix);
    wsn_net_prefix_len = len;
    if(new_prefix) {
      LOG6LBR_6ADDR(INFO, prefix, "Setting DAG prefix : ");
      rpl_repair_root(RPL_DEFAULT_INSTANCE);
    }
  }
#if CONTIKI_TARGET_NATIVE
  cetic_6lbr_save_ip();
#endif
#endif
}

开发者ID:Devesh24，项目名称:6lbr，代码行数:28，代码来源:cetic-6lbr.c

示例4: PROCESS_THREAD

/*---------------------------------------------------------------------------*/
PROCESS_THREAD(border_router_process, ev, data)
{
  static struct etimer et;
  rpl_dag_t *dag;

  PROCESS_BEGIN();
  prefix_set = 0;

  PROCESS_PAUSE();

  PRINTF("RPL-Border router started\n");

  slip_config_handle_arguments(contiki_argc, contiki_argv);

  /* tun init is also responsible for setting up the SLIP connection */
  tun_init();

  while(!mac_set) {
    etimer_set(&et, CLOCK_SECOND);
    request_mac();
    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
  }

  if(slip_config_ipaddr != NULL) {
    uip_ipaddr_t prefix;

    if(uiplib_ipaddrconv((const char *)slip_config_ipaddr, &prefix)) {
      PRINTF("Setting prefix ");
      PRINT6ADDR(&prefix);
      PRINTF("\n");
      set_prefix_64(&prefix);
    } else {
      PRINTF("Parse error: %s\n", slip_config_ipaddr);
      exit(0);
    }
  }

  dag = rpl_set_root(RPL_DEFAULT_INSTANCE,(uip_ip6addr_t *)dag_id);
  if(dag != NULL) {
    rpl_set_prefix(dag, &prefix, 64);
    PRINTF("created a new RPL dag\n");
  }

#if DEBUG
  print_local_addresses();
#endif

  /* The border router runs with a 100% duty cycle in order to ensure high
     packet reception rates. */
  NETSTACK_MAC.off(1);

  while(1) {
    etimer_set(&et, CLOCK_SECOND * 2);
    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
    /* do anything here??? */
  }

  PROCESS_END();
}

开发者ID:AlexandreRio，项目名称:contiki，代码行数:60，代码来源:border-router.c

示例5: PROCESS_THREAD

/*---------------------------------------------------------------------------*/
PROCESS_THREAD(border_router_process, ev, data)
{
#ifdef PREFIX_DISC
  static struct etimer et;
#endif
  rpl_dag_t *dag;

  PROCESS_BEGIN();

  prefix_set = 0;

  PROCESS_PAUSE();

  SENSORS_ACTIVATE(button_sensor);

  PRINTF("RPL-Border router started\n");

   /* The border router runs with a 100% duty cycle in order to ensure high
     packet reception rates.
     Note if the MAC RDC is not turned off now, aggressive power management of the
     cpu will interfere with establishing the SLIP connection */
  NETSTACK_MAC.off(1);
 
#ifndef PREFIX_DISC
  if (!uiplib_ipaddrconv("aaaa::", &prefix))
      goto err;
#else
  /* Request prefix until it has been received */
  while(!prefix_set) {
    etimer_set(&et, CLOCK_SECOND);
    request_prefix();
    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
  }
#endif

  dag = rpl_set_root(RPL_DEFAULT_INSTANCE,(uip_ip6addr_t *)dag_id);
  if(dag != NULL) {
    rpl_set_prefix(dag, &prefix, 64);
    PRINTF("created a new RPL dag\n");
  }

#if DEBUG || 1
  print_local_addresses();
#endif

  while(1) {
    PROCESS_YIELD();
    if (ev == sensors_event && data == &button_sensor) {
      PRINTF("Initiating global repair\n");
      rpl_repair_root(RPL_DEFAULT_INSTANCE);
    }
  }

err:
  PRINTF("Shutting down\n");
  PROCESS_END();
}

开发者ID:chanhemow，项目名称:contiki-fork，代码行数:58，代码来源:border-router.c

示例6: PROCESS_THREAD

/*---------------------------------------------------------------------------*/
PROCESS_THREAD(udp_server_process, ev, data)
{
    uip_ipaddr_t ipaddr;
    struct uip_ds6_addr *root_if;

    PROCESS_BEGIN();

    PROCESS_PAUSE();

    SENSORS_ACTIVATE(button_sensor);

    PRINTF("UDP server started\n");

#if UIP_CONF_ROUTER
    uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 1);
    /* uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr); */
    uip_ds6_addr_add(&ipaddr, 0, ADDR_MANUAL);
    root_if = uip_ds6_addr_lookup(&ipaddr);
    if(root_if != NULL) {
        rpl_dag_t *dag;
        rpl_set_root((uip_ip6addr_t *)&ipaddr);
        dag = rpl_get_dag(RPL_ANY_INSTANCE);
        uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
        rpl_set_prefix(dag, &ipaddr, 64);
        PRINTF("created a new RPL dag\n");
    } else {
        PRINTF("failed to create a new RPL DAG\n");
    }
#endif /* UIP_CONF_ROUTER */

    print_local_addresses();

    /* The data sink runs with a 100% duty cycle in order to ensure high
       packet reception rates. */
    NETSTACK_RDC.off(1);

    server_conn = udp_new(NULL, UIP_HTONS(UDP_CLIENT_PORT), NULL);
    udp_bind(server_conn, UIP_HTONS(UDP_SERVER_PORT));

    PRINTF("Created a server connection with remote address ");
    PRINT6ADDR(&server_conn->ripaddr);
    PRINTF(" local/remote port %u/%u\n", UIP_HTONS(server_conn->lport),
           UIP_HTONS(server_conn->rport));

    while(1) {
        PROCESS_YIELD();
        if(ev == tcpip_event) {
            tcpip_handler();
        } else if (ev == sensors_event && data == &button_sensor) {
            PRINTF("Initiaing global repair\n");
            rpl_repair_dag(rpl_get_dag(RPL_ANY_INSTANCE));
        }
    }

    PROCESS_END();
}

开发者ID:uoaerg，项目名称:wise，代码行数:57，代码来源:udp-sink.c

示例7: cetic_6lbr_start_dodag_root

void
cetic_6lbr_start_dodag_root(void)
{
#if CETIC_6LBR_DODAG_ROOT
  if((nvm_data.rpl_config & CETIC_6LBR_MODE_MANUAL_DODAG) != 0) {
    //Manual DODAG ID
    cetic_dag = rpl_set_root(nvm_data.rpl_instance_id, (uip_ipaddr_t*)&nvm_data.rpl_dodag_id);
  } else {
    //Automatic DODAG ID
    if((nvm_data.rpl_config & CETIC_6LBR_MODE_GLOBAL_DODAG) != 0) {
#if CETIC_6LBR_SMARTBRIDGE
      if((nvm_data.mode & CETIC_MODE_WAIT_RA_MASK) == 0) {
#endif
      //DODAGID = global address used !
      cetic_dag = rpl_set_root(nvm_data.rpl_instance_id, &wsn_ip_addr);
#if CETIC_6LBR_SMARTBRIDGE
      } else {
        //Not global IP yet configured
        cetic_dag = NULL;
      }
#endif
    } else {
      //DODAGID = link-local address used !
      cetic_dag = rpl_set_root(nvm_data.rpl_instance_id, &wsn_ip_local_addr);
    }
  }
#if CETIC_6LBR_SMARTBRIDGE
  if((nvm_data.mode & CETIC_MODE_WAIT_RA_MASK) == 0) {
    rpl_set_prefix(cetic_dag, &wsn_net_prefix, nvm_data.wsn_net_prefix_len);
  }
#else
  rpl_set_prefix(cetic_dag, &wsn_net_prefix, nvm_data.wsn_net_prefix_len);
#endif
  if(cetic_dag) {
    LOG6LBR_6ADDR(INFO, &cetic_dag->dag_id, "Configured as DODAG Root ");
  }
  if(!uip_is_addr_unspecified(&wsn_ip_addr)) {
    uip_ds6_addr_add(&wsn_ip_addr, 0, ((nvm_data.mode & CETIC_MODE_WSN_AUTOCONF) != 0) ? ADDR_AUTOCONF : ADDR_MANUAL);
  }
#endif /* CETIC_6LBR_DODAG_ROOT */
}

开发者ID:kamejoko80，项目名称:6lbr，代码行数:41，代码来源:cetic-6lbr.c

示例8: PROCESS_THREAD

/*---------------------------------------------------------------------------*/
PROCESS_THREAD(border_router_process, ev, data)
{
  static struct etimer et;
  rpl_dag_t *dag;

  PROCESS_BEGIN();
  prefix_set = 0;

  PROCESS_PAUSE();

#if WEBSERVER
  process_start(&webserver_nogui_process, NULL);
#endif

  //SENSORS_ACTIVATE(button_sensor);

  PRINTF("RPL-Border router started\n");

  /* Request prefix until it has been received */
  while(!prefix_set) {
    etimer_set(&et, CLOCK_SECOND);
    request_prefix();
    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
  }

  dag = rpl_set_root((uip_ip6addr_t *)dag_id);
  if(dag != NULL) {
    rpl_set_prefix(dag, &prefix, 64);
    PRINTF("created a new RPL dag\n");
  }

#if DEBUG || 1
  print_local_addresses();
#endif

  /* The border router runs with a 100% duty cycle in order to ensure high
     packet reception rates. */
  NETSTACK_MAC.off(1);

  static struct etimer t;
  etimer_set(&t, 10*CLOCK_SECOND);
  while(1) {
    PROCESS_YIELD();
    //if (ev == sensors_event && data == &button_sensor) {
    if (etimer_expired(&t)) {
      PRINTF("Initiating global repair\n");
      rpl_repair_dag(rpl_get_dag(RPL_ANY_INSTANCE));
      etimer_reset(&t);
    }
  }

  PROCESS_END();
}

开发者ID:bulajicm，项目名称:contiki-iris-examples，代码行数:54，代码来源:border-router-shinta.c

示例9: rpl_dag_root_init_dag_immediately

/*---------------------------------------------------------------------------*/
int
rpl_dag_root_init_dag_immediately(void)
{
  struct uip_ds6_addr *root_if;
  int i;
  uint8_t state;
  uip_ipaddr_t *ipaddr = NULL;

  rpl_dag_root_init();

  for(i = 0; i < UIP_DS6_ADDR_NB; i++) {
    state = uip_ds6_if.addr_list[i].state;
    if(uip_ds6_if.addr_list[i].isused &&
       state == ADDR_PREFERRED &&
       !uip_is_addr_linklocal(&uip_ds6_if.addr_list[i].ipaddr)) {
      ipaddr = &uip_ds6_if.addr_list[i].ipaddr;
    }
  }

  if(ipaddr != NULL) {
    root_if = uip_ds6_addr_lookup(ipaddr);
    if(root_if != NULL) {
      rpl_dag_t *dag;
      uip_ipaddr_t prefix;

      rpl_set_root(RPL_DEFAULT_INSTANCE, ipaddr);
      dag = rpl_get_any_dag();

      /* If there are routes in this dag, we remove them all as we are
         from now on the new dag root and the old routes are wrong */
      if(RPL_IS_STORING(dag->instance)) {
        rpl_remove_routes(dag);
      }
      if(dag->instance != NULL &&
         dag->instance->def_route != NULL) {
	uip_ds6_defrt_rm(dag->instance->def_route);
        dag->instance->def_route = NULL;
      }

      uip_ip6addr(&prefix, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
      rpl_set_prefix(dag, &prefix, 64);
      PRINTF("RPL: rpl_dag_root_init_dag: created a new RPL dag\n");
      return 0;
    } else {
      PRINTF("RPL: rpl_dag_root_init_dag: failed to create a new RPL DAG\n");
      return -1;
    }
  } else {
    PRINTF("RPL: rpl_dag_root_init_dag: failed to create a new RPL DAG, no preferred IP address found\n");
    return -2;
  }
}

开发者ID:1847123212，项目名称:contiki，代码行数:53，代码来源:rpl-dag-root.c

示例10: simple_rpl_init_dag_immediately

/*---------------------------------------------------------------------------*/
int
simple_rpl_init_dag_immediately(void)
{
    struct uip_ds6_addr *root_if;
    int i;
    uint8_t state;
    uip_ipaddr_t *ipaddr = NULL;

    for(i = 0; i < UIP_DS6_ADDR_NB; i++) {
        state = uip_ds6_if.addr_list[i].state;
        if(uip_ds6_if.addr_list[i].isused &&
                state == ADDR_PREFERRED &&
                !uip_is_addr_link_local(&uip_ds6_if.addr_list[i].ipaddr)) {
            ipaddr = &uip_ds6_if.addr_list[i].ipaddr;
        }
    }

    if(ipaddr != NULL) {
        root_if = uip_ds6_addr_lookup(ipaddr);
        if(root_if != NULL) {
            rpl_dag_t *dag;
            uip_ipaddr_t prefix;

            rpl_set_root(RPL_DEFAULT_INSTANCE, ipaddr);
            dag = rpl_get_any_dag();

            /* If there are routes in this dag, we remove them all as we are
               from now on the new dag root and the old routes are wrong */
            rpl_remove_routes(dag);
            if(dag->instance != NULL &&
                    dag->instance->def_route != NULL) {
                uip_ds6_defrt_rm(dag->instance->def_route);
                dag->instance->def_route = NULL;
            }

#if CONTIKI_TARGET_TRXEB1120 || CONTIKI_TARGET_ETH1120 || CONTIKI_TARGET_TRXEB2520 || CONTIKI_TARGET_TRXEB1101 || CONTIKI_TARGET_ETH1101 || CONTIKI_TARGET_ETH2520
            uip_ip6addr(&prefix, 0xfc00, 0, 0xabba, 0xabba, 0, 0, 0, 0);
#else /* CONTIKI_TARGET_TRXEB1120 */
            uip_ip6addr(&prefix, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
#endif /* CONTIKI_TARGET_TRXEB1120 */
            rpl_set_prefix(dag, &prefix, 64);
            printf("\r\nsimple_rpl_init_dag: created a new RPL dag\n");
            return 0;
        } else {
            printf("\r\nsimple_rpl_init_dag: failed to create a new RPL DAG\n");
            return -1;
        }
    } else {
        printf("\r\nsimple_rpl_init_dag: failed to create a new RPL DAG, no preferred IP address found\n");
        return -2;
    }
}

开发者ID:exziled，项目名称:WeatherSystem，代码行数:53，代码来源:simple-rpl.c

示例11: PROCESS_THREAD

/*---------------------------------------------------------------------------*/
PROCESS_THREAD(unicast_sender_process, ev, data)
{
  static struct etimer periodic_timer;
  static struct etimer send_timer;
  uip_ipaddr_t global_ipaddr;

  PROCESS_BEGIN();

  printf("App: %u starting\n", node_id);

  uip_ip6addr(&root_ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 1);

  if(node_id == ROOT_ID) {
    memcpy(&global_ipaddr, &root_ipaddr, 16);
    uip_ds6_addr_add(&global_ipaddr, 0, ADDR_MANUAL);
    rpl_dag_t *dag = rpl_set_root(RPL_DEFAULT_INSTANCE, &global_ipaddr);
    rpl_set_prefix(dag, &global_ipaddr, 64);
  } else {
    uip_ip6addr(&global_ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
    uip_ds6_set_addr_iid(&global_ipaddr, &uip_lladdr);
    uip_ds6_addr_add(&global_ipaddr, 0, ADDR_AUTOCONF);
  }

  orpl_init(&global_ipaddr, node_id == ROOT_ID, 1);
  simple_udp_register(&unicast_connection, UDP_PORT,
                      NULL, UDP_PORT, receiver);

  if(node_id == ROOT_ID) {
    NETSTACK_RDC.off(1);
  } else {
    etimer_set(&periodic_timer, SEND_INTERVAL);
    while(1) {
      etimer_set(&send_timer, random_rand() % (SEND_INTERVAL));
      PROCESS_WAIT_UNTIL(etimer_expired(&send_timer));

      if(orpl_current_edc() != 0xffff) {
        app_send_to(ROOT_ID);
      } else {
        printf("App: not in DODAG\n");
      }

      PROCESS_WAIT_UNTIL(etimer_expired(&periodic_timer));
      etimer_reset(&periodic_timer);
    }
  }

  PROCESS_END();
}

开发者ID:Johnyren，项目名称:orpl，代码行数:49，代码来源:app-collect-only.c

示例12: set_prefix_64

/*---------------------------------------------------------------------------*/
void
set_prefix_64(uip_ipaddr_t *prefix_64)
{
  rpl_dag_t *dag;
  uip_ipaddr_t ipaddr;
  memcpy(&prefix, prefix_64, 16);
  memcpy(&ipaddr, prefix_64, 16);
  prefix_set = 1;
  uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
  uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);

  dag = rpl_set_root(RPL_DEFAULT_INSTANCE, &ipaddr);
  if(dag != NULL) {
    rpl_set_prefix(dag, &prefix, 64);
    PRINTF("created a new RPL dag\n");
  }
}

开发者ID:jamella，项目名称:MyRepository，代码行数:18，代码来源:borderest.c

示例13: net_init

/*---------------------------------------------------------------------------*/
static void
net_init(uip_ipaddr_t *br_prefix)
{
  uip_ipaddr_t global_ipaddr;

  if(br_prefix) { /* We are RPL root. Will be set automatically
                     as TSCH pan coordinator via the tsch-rpl module */
    memcpy(&global_ipaddr, br_prefix, 16);
    uip_ds6_set_addr_iid(&global_ipaddr, &uip_lladdr);
    uip_ds6_addr_add(&global_ipaddr, 0, ADDR_AUTOCONF);
    rpl_set_root(RPL_DEFAULT_INSTANCE, &global_ipaddr);
    rpl_set_prefix(rpl_get_any_dag(), br_prefix, 64);
    rpl_repair_root(RPL_DEFAULT_INSTANCE);
  }

  NETSTACK_MAC.on();
}

开发者ID:matzTada，项目名称:contiki，代码行数:18，代码来源:node-sender-leapfrog-replicate.c

示例14: PROCESS_THREAD

PROCESS_THREAD(border_router_process, ev, data)
{

  PROCESS_BEGIN();

  PROCESS_PAUSE();

{ rpl_dag_t *dag;
  char buf[sizeof(dag_id)];
  memcpy_P(buf,dag_id,sizeof(dag_id));
  dag = rpl_set_root((uip_ip6addr_t *)buf);

/* Assign separate addresses to the jackdaw uip stack and the host network interface, but with the same prefix */
/* E.g. bbbb::200 to the jackdaw and bbbb::1 to the host network interface with $ip -6 address add bbbb::1/64 dev usb0 */
/* Otherwise the host will trap packets intended for the jackdaw, just as the jackdaw will trap RF packets intended for the host */
/* $ifconfig usb0 -arp on Ubuntu to skip the neighbor solicitations. Add explicit neighbors on other OSs */
  if(dag != NULL) {
    PRINTD("created a new RPL dag\n");

#if UIP_CONF_ROUTER_RECEIVE_RA
//Contiki stack will shut down until assigned an address from the interface RA
//Currently this requires changes in the core rpl-icmp6.c to pass the link-local RA broadcast

#else
    uip_ip6addr_t ipaddr;
    uip_ip6addr(&ipaddr, 0xbbbb, 0, 0, 0, 0, 0, 0, 0x200);
    uip_ds6_addr_add(&ipaddr, 0, ADDR_MANUAL);
    rpl_set_prefix(dag, &ipaddr, 64);
#endif
  }
}
  /* The border router runs with a 100% duty cycle in order to ensure high
     packet reception rates. */
 // NETSTACK_MAC.off(1);

  while(1) {
    PROCESS_YIELD();
    /* Local and global dag repair can be done from the jackdaw menu */
 //   rpl_set_prefix(rpl_get_dag(RPL_ANY_INSTANCE), &ipaddr, 64);
 //   rpl_repair_dag(rpl_get_dag(RPL_ANY_INSTANCE));

  }

  PROCESS_END();
}

开发者ID:C3MA，项目名称:hexabus，代码行数:45，代码来源:contiki-hexabus-main.c

示例15: set_prefix_64

/* Set our prefix when we receive one over SLIP */
void
set_prefix_64(uip_ipaddr_t *prefix_64) {
  rpl_dag_t *dag;
  uip_ipaddr_t ipaddr;
  memcpy(&ipaddr, prefix_64, 16);
  prefix_set = 1;
  uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
  uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);

  /* Become root of a new DODAG with ID our global v6 address */
  dag = rpl_set_root(RPL_DEFAULT_INSTANCE, &ipaddr);
  if(dag != NULL) {
    rpl_set_prefix(dag, &ipaddr, 64);
    PRINTF("Created a new RPL dag with ID: ");
    PRINT6ADDR(&dag->dag_id);
    PRINTF("\n");
  }
}

开发者ID:GDanii，项目名称:contiki-mirror-MICAz-IPv6，代码行数:19，代码来源:border-router.c

示例16: cetic_6lbr_set_prefix

void
cetic_6lbr_set_prefix(uip_ipaddr_t * prefix, unsigned len,
                      uip_ipaddr_t * ipaddr)
{
  PRINTF("CETIC_BRIDGE : set_prefix\n");
  if((nvm_data.mode & CETIC_MODE_WAIT_RA_MASK) == 0) {
    PRINTF("Ignoring RA\n");
    return;
  }

  if(cetic_dag != NULL) {
    PRINTF("Setting DAG prefix : ");
    PRINT6ADDR(&prefix->u8);
    PRINTF("\n");
    rpl_set_prefix(cetic_dag, prefix, len);
    uip_ipaddr_copy(&wsn_net_prefix, prefix);
  }
}

开发者ID:denghongcai，项目名称:6lbr，代码行数:18，代码来源:cetic-6lbr.c

示例17: create_rpl_dag

/*---------------------------------------------------------------------------*/
static void
create_rpl_dag(uip_ipaddr_t *ipaddr)
{
  struct uip_ds6_addr *root_if;
  root_if = uip_ds6_addr_lookup(ipaddr);
  if(root_if != NULL) {
    rpl_dag_t *dag;
    uip_ipaddr_t prefix;

    rpl_set_root(RPL_DEFAULT_INSTANCE, ipaddr);
    dag = rpl_get_any_dag();
    uip_ip6addr(&prefix, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
    rpl_set_prefix(dag, &prefix, 64);
    printf("created a new RPL dag\n");
  } else {
    printf("failed to create a new RPL DAG\n");
  }
}

开发者ID:Blade87，项目名称:contiki-stm32f10x-iar，代码行数:19，代码来源:udp-stream.c

示例18: create_dag

void
create_dag()
{
  rpl_dag_t *dag;

  uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
  uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
  uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);

  print_local_addresses();

  dag = rpl_set_root(RPL_DEFAULT_INSTANCE, &uip_ds6_get_global(ADDR_PREFERRED)->ipaddr);
  if(dag != NULL) {
    uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
    rpl_set_prefix(dag, &ipaddr, 64);
    PRINTF("Created a new RPL dag with ID: ");
    PRINT6ADDR(&dag->dag_id);
    PRINTF("\n");
  }
}

开发者ID:Ammar-85，项目名称:contiki-arduino，代码行数:20，代码来源:server.c

示例19: create_dag

static void
create_dag(void)
{

    uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 1);
    //uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
    uip_ds6_addr_add(&ipaddr, 0, ADDR_MANUAL);
    root_if = uip_ds6_addr_lookup(&ipaddr);
    if(root_if != NULL) {
        static rpl_dag_t *dag;
        dag = rpl_set_root(RPL_DEFAULT_INSTANCE,(uip_ip6addr_t *)&ipaddr);
        uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
        rpl_set_prefix(dag, &ipaddr, 64);
        PRINTF("created a new RPL dag with ID:");
        PRINT6ADDR(&dag->dag_id);
        printf("\n");
    } else {
        PRINTF("failed to create a new RPL DAG\n");
    }

}

开发者ID:alirezapourbahram，项目名称:IoT-Wormhole-IDS，代码行数:21，代码来源:1.c

示例20: create_dag

void create_dag()
{
    uip_ipaddr_t ipaddr;
    rpl_dag_t* dag;

    // Create dag
    dag = rpl_set_root(RPL_DEFAULT_INSTANCE,
        &uip_ds6_get_global(ADDR_PREFERRED)->ipaddr);

    if(dag == NULL) {
      printf("E03\n");
      return;
    }

    // Set the network prefix
    uip_ip6addr(&ipaddr, 0xAAAA, 0, 0, 0, 0, 0, 0, 0);
    rpl_set_prefix(dag, &ipaddr, 64);

    PRINTF("# Created a new RPL dag with ID: ");
    PRINT6ADDR(&dag->dag_id);
    PRINTF("\n");
}

开发者ID:RauPerez25，项目名称:Wall-E，代码行数:22，代码来源:node.c

注：本文中的rpl_set_prefix函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rpmExpand函数代码示例发布时间：2022-05-30

C++ rpl_set_default_route函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17960|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9565|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8412|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9305|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8376|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8360|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rpl_set_prefix函数代码示例

示例1: cetic_6lbr_set_prefix

示例2: set_own_addresses

示例3: cetic_6lbr_set_prefix

示例4: PROCESS_THREAD

示例5: PROCESS_THREAD

示例6: PROCESS_THREAD

示例7: cetic_6lbr_start_dodag_root

示例8: PROCESS_THREAD

示例9: rpl_dag_root_init_dag_immediately

示例10: simple_rpl_init_dag_immediately

示例11: PROCESS_THREAD

示例12: set_prefix_64

示例13: net_init

示例14: PROCESS_THREAD

示例15: set_prefix_64

示例16: cetic_6lbr_set_prefix

示例17: create_rpl_dag

示例18: create_dag

示例19: create_dag

示例20: create_dag

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-34496

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053