本文整理汇总了C++中rsnd_mod_id函数的典型用法代码示例。如果您正苦于以下问题：C++ rsnd_mod_id函数的具体用法？C++ rsnd_mod_id怎么用？C++ rsnd_mod_id使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了rsnd_mod_id函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rsnd_dmapp_get_id
static u32 rsnd_dmapp_get_id(struct rsnd_dai_stream *io,
struct rsnd_mod *mod)
{
struct rsnd_mod *ssi = rsnd_io_to_mod_ssi(io);
struct rsnd_mod *src = rsnd_io_to_mod_src(io);
struct rsnd_mod *dvc = rsnd_io_to_mod_dvc(io);
const u8 *entry = NULL;
int id = rsnd_mod_id(mod);
int size = 0;
if (mod == ssi) {
entry = gen2_id_table_ssiu;
size = ARRAY_SIZE(gen2_id_table_ssiu);
} else if (mod == src) {
entry = gen2_id_table_scu;
size = ARRAY_SIZE(gen2_id_table_scu);
} else if (mod == dvc) {
entry = gen2_id_table_cmd;
size = ARRAY_SIZE(gen2_id_table_cmd);
}
if ((!entry) || (size <= id)) {
struct device *dev = rsnd_priv_to_dev(rsnd_io_to_priv(io));
dev_err(dev, "unknown connection (%s[%d])\n",
rsnd_mod_name(mod), rsnd_mod_id(mod));
/* use non-prohibited SRS number as error */
return 0x00; /* SSI00 */
}
return entry[id];
}
开发者ID:513855417，项目名称:linux，代码行数:33，代码来源:dma.c
示例2: snprintf
char *rsnd_mod_name(struct rsnd_mod *mod)
{
static char names[MOD_NAME_NUM][MOD_NAME_SIZE];
static int num;
char *name = names[num];
num++;
if (num >= MOD_NAME_NUM)
num = 0;
/*
* Let's use same char to avoid pointlessness memory
* Thus, rsnd_mod_name() should be used immediately
* Don't keep pointer
*/
if ((mod)->ops->id_sub) {
snprintf(name, MOD_NAME_SIZE, "%s[%d%d]",
mod->ops->name,
rsnd_mod_id(mod),
rsnd_mod_id_sub(mod));
} else {
snprintf(name, MOD_NAME_SIZE, "%s[%d]",
mod->ops->name,
rsnd_mod_id(mod));
}
return name;
}
开发者ID:lfd，项目名称:PreemptRT，代码行数:28，代码来源:core.c
示例3: rsnd_ssi_run_mods
static u32 rsnd_ssi_run_mods(struct rsnd_dai_stream *io)
{
struct rsnd_mod *ssi_mod = rsnd_io_to_mod_ssi(io);
struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io);
return rsnd_ssi_multi_slaves_runtime(io) |
1 << rsnd_mod_id(ssi_mod) |
1 << rsnd_mod_id(ssi_parent_mod);
}
开发者ID:020gzh，项目名称:linux，代码行数:9，代码来源:ssi.c
示例4: rsnd_write
void rsnd_write(struct rsnd_priv *priv,
struct rsnd_mod *mod,
enum rsnd_reg reg, u32 data)
{
struct device *dev = rsnd_priv_to_dev(priv);
struct rsnd_gen *gen = rsnd_priv_to_gen(priv);
if (!rsnd_is_accessible_reg(priv, gen, reg))
return;
dev_dbg(dev, "w %s[%d] - %4d : %08x\n",
rsnd_mod_name(mod), rsnd_mod_id(mod), reg, data);
regmap_fields_write(gen->regs[reg], rsnd_mod_id(mod), data);
}
开发者ID:Chong-Li，项目名称:cse522，代码行数:15，代码来源:gen.c
示例5: rsnd_adg_set_ssi_clk
static void rsnd_adg_set_ssi_clk(struct rsnd_mod *ssi_mod, u32 val)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(ssi_mod);
struct rsnd_adg *adg = rsnd_priv_to_adg(priv);
struct rsnd_mod *adg_mod = rsnd_mod_get(adg);
int id = rsnd_mod_id(ssi_mod);
int shift = (id % 4) * 8;
u32 mask = 0xFF << shift;
rsnd_mod_confirm_ssi(ssi_mod);
val = val << shift;
/*
* SSI 8 is not connected to ADG.
* it works with SSI 7
*/
if (id == 8)
return;
switch (id / 4) {
case 0:
rsnd_mod_bset(adg_mod, AUDIO_CLK_SEL0, mask, val);
break;
case 1:
rsnd_mod_bset(adg_mod, AUDIO_CLK_SEL1, mask, val);
break;
case 2:
rsnd_mod_bset(adg_mod, AUDIO_CLK_SEL2, mask, val);
break;
}
}
开发者ID:Chong-Li，项目名称:cse522，代码行数:32，代码来源:adg.c
示例6: rsnd_ssi_parent_attach
/*
* SSI PIO
*/
static void rsnd_ssi_parent_attach(struct rsnd_mod *mod,
struct rsnd_dai_stream *io)
{
struct rsnd_dai *rdai = rsnd_io_to_rdai(io);
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
if (!__rsnd_ssi_is_pin_sharing(mod))
return;
if (!rsnd_rdai_is_clk_master(rdai))
return;
switch (rsnd_mod_id(mod)) {
case 1:
case 2:
rsnd_dai_connect(rsnd_ssi_mod_get(priv, 0), io, RSND_MOD_SSIP);
break;
case 4:
rsnd_dai_connect(rsnd_ssi_mod_get(priv, 3), io, RSND_MOD_SSIP);
break;
case 8:
rsnd_dai_connect(rsnd_ssi_mod_get(priv, 7), io, RSND_MOD_SSIP);
break;
}
}
开发者ID:020gzh，项目名称:linux，代码行数:28，代码来源:ssi.c
示例7: rsnd_ssi_quit
static int rsnd_ssi_quit(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
struct device *dev = rsnd_priv_to_dev(priv);
if (!rsnd_ssi_is_run_mods(mod, io))
return 0;
if (!ssi->usrcnt) {
dev_err(dev, "%s[%d] usrcnt error\n",
rsnd_mod_name(mod), rsnd_mod_id(mod));
return -EIO;
}
if (!rsnd_ssi_is_parent(mod, io))
ssi->cr_own = 0;
rsnd_ssi_master_clk_stop(mod, io);
rsnd_mod_power_off(mod);
ssi->usrcnt--;
return 0;
}
开发者ID:020gzh，项目名称:linux，代码行数:27，代码来源:ssi.c
示例8: rsnd_ssi_hw_start
static void rsnd_ssi_hw_start(struct rsnd_ssi *ssi,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(&ssi->mod);
struct device *dev = rsnd_priv_to_dev(priv);
u32 cr;
if (0 == ssi->usrcnt) {
clk_enable(ssi->clk);
if (rsnd_rdai_is_clk_master(rdai)) {
if (rsnd_ssi_clk_from_parent(ssi))
rsnd_ssi_hw_start(ssi->parent, rdai, io);
else
rsnd_ssi_master_clk_start(ssi, io);
}
}
cr = ssi->cr_own |
ssi->cr_clk |
ssi->cr_etc |
EN;
rsnd_mod_write(&ssi->mod, SSICR, cr);
ssi->usrcnt++;
dev_dbg(dev, "ssi%d hw started\n", rsnd_mod_id(&ssi->mod));
}
开发者ID:LuweiLight，项目名称:linux-3.14.35-vbal，代码行数:30，代码来源:ssi.c
示例9: rsnd_dmapp_get_id
static u32 rsnd_dmapp_get_id(struct rsnd_dai_stream *io,
struct rsnd_mod *mod)
{
struct rsnd_mod *ssi = rsnd_io_to_mod_ssi(io);
struct rsnd_mod *src = rsnd_io_to_mod_src(io);
struct rsnd_mod *dvc = rsnd_io_to_mod_dvc(io);
const u8 *entry = NULL;
int id = rsnd_mod_id(mod);
int size = 0;
if (mod == ssi) {
entry = gen2_id_table_ssiu;
size = ARRAY_SIZE(gen2_id_table_ssiu);
} else if (mod == src) {
entry = gen2_id_table_scu;
size = ARRAY_SIZE(gen2_id_table_scu);
} else if (mod == dvc) {
entry = gen2_id_table_cmd;
size = ARRAY_SIZE(gen2_id_table_cmd);
}
if (!entry)
return 0xFF;
if (size <= id)
return 0xFF;
return entry[id];
}
开发者ID:a2hojsjsjs，项目名称:linux，代码行数:29，代码来源:dma.c
示例10: rsnd_gen2_dma_addr
static dma_addr_t
rsnd_gen2_dma_addr(struct rsnd_dai_stream *io,
struct rsnd_mod *mod,
int is_play, int is_from)
{
struct rsnd_priv *priv = rsnd_io_to_priv(io);
struct device *dev = rsnd_priv_to_dev(priv);
phys_addr_t ssi_reg = rsnd_gen_get_phy_addr(priv, RSND_GEN2_SSI);
phys_addr_t src_reg = rsnd_gen_get_phy_addr(priv, RSND_GEN2_SCU);
int is_ssi = !!(rsnd_io_to_mod_ssi(io) == mod);
int use_src = !!rsnd_io_to_mod_src(io);
int use_dvc = !!rsnd_io_to_mod_dvc(io);
int id = rsnd_mod_id(mod);
struct dma_addr {
dma_addr_t out_addr;
dma_addr_t in_addr;
} dma_addrs[3][2][3] = {
/* SRC */
{{{ 0, 0 },
/* Capture */
{ RDMA_SRC_O_N(src, id), RDMA_SRC_I_P(src, id) },
{ RDMA_CMD_O_N(src, id), RDMA_SRC_I_P(src, id) } },
/* Playback */
{{ 0, 0, },
{ RDMA_SRC_O_P(src, id), RDMA_SRC_I_N(src, id) },
{ RDMA_CMD_O_P(src, id), RDMA_SRC_I_N(src, id) } }
},
/* SSI */
/* Capture */
{{{ RDMA_SSI_O_N(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 } },
/* Playback */
{{ 0, RDMA_SSI_I_N(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) } }
},
/* SSIU */
/* Capture */
{{{ RDMA_SSIU_O_N(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 } },
/* Playback */
{{ 0, RDMA_SSIU_I_N(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) } } },
};
/* it shouldn't happen */
if (use_dvc && !use_src)
dev_err(dev, "DVC is selected without SRC\n");
/* use SSIU or SSI ? */
if (is_ssi && rsnd_ssi_use_busif(io, mod))
is_ssi++;
return (is_from) ?
dma_addrs[is_ssi][is_play][use_src + use_dvc].out_addr :
dma_addrs[is_ssi][is_play][use_src + use_dvc].in_addr;
}
开发者ID:Seagate，项目名称:SMR_FS-EXT4，代码行数:60，代码来源:dma.c
示例11: rsnd_priv_to_gen
void __iomem *rsnd_gen_reg_get(struct rsnd_priv *priv,
struct rsnd_mod *mod,
enum rsnd_reg reg)
{
struct rsnd_gen *gen = rsnd_priv_to_gen(priv);
struct device *dev = rsnd_priv_to_dev(priv);
int index;
u32 offset_id, offset_adr;
if (reg >= RSND_REG_MAX) {
dev_err(dev, "rsnd_reg reg error\n");
return NULL;
}
index = gen->reg_map[reg].index;
offset_id = gen->reg_map[reg].offset_id;
offset_adr = gen->reg_map[reg].offset_adr;
if (index < 0) {
dev_err(dev, "unsupported reg access %d\n", reg);
return NULL;
}
if (offset_id && mod)
offset_id *= rsnd_mod_id(mod);
/*
* index/offset were set on gen1/gen2
*/
return gen->base[index] + offset_id + offset_adr;
}
开发者ID:AeroGirl，项目名称:VAR-SOM-AM33-SDK7-Kernel，代码行数:32，代码来源:gen.c
示例12: rsnd_src_error_clear_gen2
static void rsnd_src_error_clear_gen2(struct rsnd_mod *mod)
{
u32 val = OUF_SRC(rsnd_mod_id(mod));
rsnd_mod_bset(mod, SCU_SYS_STATUS0, val, val);
rsnd_mod_bset(mod, SCU_SYS_STATUS1, val, val);
}
开发者ID:Abioy，项目名称:kasan，代码行数:7，代码来源:src.c
示例13: rsnd_src_probe_gen2
static int rsnd_src_probe_gen2(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct rcar_snd_info *info = rsnd_priv_to_info(priv);
struct rsnd_src *src = rsnd_mod_to_src(mod);
struct rsnd_mod *ssi = rsnd_ssi_mod_get(priv, rsnd_mod_id(mod));
struct device *dev = rsnd_priv_to_dev(priv);
int ret;
int is_play;
if (info->dai_info)
is_play = rsnd_info_is_playback(priv, src);
else
is_play = rsnd_ssi_is_play(ssi);
ret = rsnd_dma_init(priv,
rsnd_mod_to_dma(mod),
is_play,
src->info->dma_id);
if (ret < 0)
dev_err(dev, "SRC DMA failed\n");
return ret;
}
开发者ID:908626950，项目名称:linux，代码行数:26，代码来源:src.c
示例14: rsnd_src_irq_ctrol_gen2
static void rsnd_src_irq_ctrol_gen2(struct rsnd_mod *mod, int enable)
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
u32 sys_int_val, int_val, sys_int_mask;
int irq = src->info->irq;
int id = rsnd_mod_id(mod);
sys_int_val =
sys_int_mask = OUF_SRC(id);
int_val = 0x3300;
/*
* IRQ is not supported on non-DT
* see
* rsnd_src_probe_gen2()
*/
if ((irq <= 0) || !enable) {
sys_int_val = 0;
int_val = 0;
}
rsnd_mod_write(mod, SRC_INT_ENABLE0, int_val);
rsnd_mod_bset(mod, SCU_SYS_INT_EN0, sys_int_mask, sys_int_val);
rsnd_mod_bset(mod, SCU_SYS_INT_EN1, sys_int_mask, sys_int_val);
}
开发者ID:Abioy，项目名称:kasan，代码行数:25，代码来源:src.c
示例15: rsnd_read
u32 rsnd_read(struct rsnd_priv *priv,
struct rsnd_mod *mod, enum rsnd_reg reg)
{
struct device *dev = rsnd_priv_to_dev(priv);
struct rsnd_gen *gen = rsnd_priv_to_gen(priv);
u32 val;
if (!rsnd_is_accessible_reg(priv, gen, reg))
return 0;
regmap_fields_read(gen->regs[reg], rsnd_mod_id(mod), &val);
dev_dbg(dev, "r %s[%d] - %4d : %08x\n",
rsnd_mod_name(mod), rsnd_mod_id(mod), reg, val);
return val;
}
开发者ID:Chong-Li，项目名称:cse522，代码行数:17，代码来源:gen.c
示例16: rsnd_bset
void rsnd_bset(struct rsnd_priv *priv, struct rsnd_mod *mod,
enum rsnd_reg reg, u32 mask, u32 data)
{
struct device *dev = rsnd_priv_to_dev(priv);
struct rsnd_gen *gen = rsnd_priv_to_gen(priv);
if (!rsnd_is_accessible_reg(priv, gen, reg))
return;
regmap_fields_update_bits(gen->regs[reg], rsnd_mod_id(mod),
mask, data);
dev_dbg(dev, "b %s[%d] - %-18s (%4d) : %08x/%08x\n",
rsnd_mod_name(mod), rsnd_mod_id(mod),
rsnd_reg_name(gen, reg), reg, data, mask);
}
开发者ID:a2hojsjsjs，项目名称:linux，代码行数:17，代码来源:gen.c
示例17: rsnd_src_set_convert_timing_gen1
static int rsnd_src_set_convert_timing_gen1(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct rsnd_src *src = rsnd_mod_to_src(mod);
struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
u32 convert_rate = rsnd_src_convert_rate(src);
u32 mask;
u32 val;
int shift;
int id = rsnd_mod_id(mod);
int ret;
/*
* SRC_TIMING_SELECT
*/
shift = (id % 4) * 8;
mask = 0x1F << shift;
/*
* ADG is used as source clock if SRC was used,
* then, SSI WS is used as destination clock.
* SSI WS is used as source clock if SRC is not used
* (when playback, source/destination become reverse when capture)
*/
ret = 0;
if (convert_rate) {
/* use ADG */
val = 0;
ret = rsnd_adg_set_convert_clk_gen1(priv, mod,
runtime->rate,
convert_rate);
} else if (8 == id) {
/* use SSI WS, but SRU8 is special */
val = id << shift;
} else {
/* use SSI WS */
val = (id + 1) << shift;
}
if (ret < 0)
return ret;
switch (id / 4) {
case 0:
rsnd_mod_bset(mod, SRC_TMG_SEL0, mask, val);
break;
case 1:
rsnd_mod_bset(mod, SRC_TMG_SEL1, mask, val);
break;
case 2:
rsnd_mod_bset(mod, SRC_TMG_SEL2, mask, val);
break;
}
return 0;
}
开发者ID:908626950，项目名称:linux，代码行数:58，代码来源:src.c
示例18: rsnd_adg_ssi_clk_try_start
int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *mod, unsigned int rate)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct rsnd_adg *adg = rsnd_priv_to_adg(priv);
struct device *dev = rsnd_priv_to_dev(priv);
struct clk *clk;
int i;
u32 data;
int sel_table[] = {
[CLKA] = 0x1,
[CLKB] = 0x2,
[CLKC] = 0x3,
[CLKI] = 0x0,
};
dev_dbg(dev, "request clock = %d\n", rate);
/*
* find suitable clock from
* AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC/AUDIO_CLKI.
*/
data = 0;
for_each_rsnd_clk(clk, adg, i) {
if (rate == clk_get_rate(clk)) {
data = sel_table[i];
goto found_clock;
}
}
/*
* find divided clock from BRGA/BRGB
*/
if (rate == adg->rbga_rate_for_441khz) {
data = 0x10;
goto found_clock;
}
if (rate == adg->rbgb_rate_for_48khz) {
data = 0x20;
goto found_clock;
}
return -EIO;
found_clock:
/*
* This "mod" = "ssi" here.
* we can get "ssi id" from mod
*/
rsnd_adg_set_ssi_clk(mod, data);
dev_dbg(dev, "ADG: %s[%d] selects 0x%x for %d\n",
rsnd_mod_name(mod), rsnd_mod_id(mod),
data, rate);
return 0;
}
开发者ID:Chong-Li，项目名称:cse522，代码行数:58，代码来源:adg.c
示例19: rsnd_ssi_init
/*
* SSI mod common functions
*/
static int rsnd_ssi_init(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct device *dev = rsnd_priv_to_dev(priv);
struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
u32 cr;
cr = FORCE;
/*
* always use 32bit system word for easy clock calculation.
* see also rsnd_ssi_master_clk_enable()
*/
cr |= SWL_32;
/*
* init clock settings for SSICR
*/
switch (runtime->sample_bits) {
case 16:
cr |= DWL_16;
break;
case 32:
cr |= DWL_24;
break;
default:
return -EIO;
}
if (rdai->bit_clk_inv)
cr |= SCKP;
if (rdai->frm_clk_inv)
cr |= SWSP;
if (rdai->data_alignment)
cr |= SDTA;
if (rdai->sys_delay)
cr |= DEL;
if (rsnd_dai_is_play(rdai, io))
cr |= TRMD;
/*
* set ssi parameter
*/
ssi->rdai = rdai;
ssi->io = io;
ssi->cr_own = cr;
ssi->err = -1; /* ignore 1st error */
rsnd_ssi_mode_set(priv, rdai, ssi);
dev_dbg(dev, "%s.%d init\n", rsnd_mod_name(mod), rsnd_mod_id(mod));
return 0;
}
开发者ID:LuweiLight，项目名称:linux-3.14.35-vbal，代码行数:60，代码来源:ssi.c
示例20: rsnd_dai_pointer_update
/*
* Renesas sound Gen1 needs 1 DMAC,
* Gen2 needs 2 DMAC.
* In Gen2 case, it are Audio-DMAC, and Audio-DMAC-peri-peri.
* But, Audio-DMAC-peri-peri doesn't have interrupt,
* and this driver is assuming that here.
*
* If Audio-DMAC-peri-peri has interrpt,
* rsnd_dai_pointer_update() will be called twice,
* ant it will breaks io->byte_pos
*/
rsnd_dai_pointer_update(io, io->byte_per_period);
}
void rsnd_dma_start(struct rsnd_dma *dma)
{
struct rsnd_mod *mod = rsnd_dma_to_mod(dma);
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct rsnd_dai_stream *io = rsnd_mod_to_io(mod);
struct snd_pcm_substream *substream = io->substream;
struct device *dev = rsnd_priv_to_dev(priv);
struct dma_async_tx_descriptor *desc;
desc = dmaengine_prep_dma_cyclic(dma->chan,
(dma->addr) ? dma->addr :
substream->runtime->dma_addr,
snd_pcm_lib_buffer_bytes(substream),
snd_pcm_lib_period_bytes(substream),
dma->dir,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(dev, "dmaengine_prep_slave_sg() fail\n");
return;
}
desc->callback = rsnd_dma_complete;
desc->callback_param = dma;
if (dmaengine_submit(desc) < 0) {
dev_err(dev, "dmaengine_submit() fail\n");
return;
}
dma_async_issue_pending(dma->chan);
}
int rsnd_dma_available(struct rsnd_dma *dma)
{
return !!dma->chan;
}
#define DMA_NAME_SIZE 16
#define MOD_MAX 4 /* MEM/SSI/SRC/DVC */
static int _rsnd_dma_of_name(char *dma_name, struct rsnd_mod *mod)
{
if (mod)
return snprintf(dma_name, DMA_NAME_SIZE / 2, "%s%d",
rsnd_mod_dma_name(mod), rsnd_mod_id(mod));
else
return snprintf(dma_name, DMA_NAME_SIZE / 2, "mem");
}
开发者ID:3null，项目名称:linux，代码行数:64，代码来源:core.c
注：本文中的rsnd_mod_id函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论