本文整理汇总了C++中rt2x00_set_field32函数的典型用法代码示例。如果您正苦于以下问题：C++ rt2x00_set_field32函数的具体用法？C++ rt2x00_set_field32怎么用？C++ rt2x00_set_field32使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了rt2x00_set_field32函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rt2400pci_config_channel
static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev,
struct rf_channel *rf)
{
/*
* Switch on tuning bits.
*/
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
rt2400pci_rf_write(rt2x00dev, 2, rf->rf2);
rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
/*
* RF2420 chipset don't need any additional actions.
*/
if (rt2x00_rf(rt2x00dev, RF2420))
return;
/*
* For the RT2421 chipsets we need to write an invalid
* reference clock rate to activate auto_tune.
* After that we set the value back to the correct channel.
*/
rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32);
rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
msleep(1);
rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
rt2400pci_rf_write(rt2x00dev, 2, rf->rf2);
rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
msleep(1);
/*
* Switch off tuning bits.
*/
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
/*
* Clear false CRC during channel switch.
*/
rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
}
开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:50，代码来源:rt2400pci.c
示例2: rt2800pci_eepromregister_write
static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
{
struct rt2x00_dev *rt2x00dev = eeprom->data;
u32 reg = 0;
rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK,
!!eeprom->reg_data_clock);
rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT,
!!eeprom->reg_chip_select);
rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
}
开发者ID:AdrianHuang，项目名称:uclinux-robutest，代码行数:14，代码来源:rt2800pci.c
示例3: rt2400pci_blink_set
static int rt2400pci_blink_set(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct rt2x00_led *led =
container_of(led_cdev, struct rt2x00_led, led_dev);
u32 reg;
rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®);
rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on);
rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off);
rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
return 0;
}
开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:15，代码来源:rt2400pci.c
示例4: rt2800pci_enable_radio
static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 word;
/*
* Initialize all registers.
*/
if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
rt2800pci_init_queues(rt2x00dev) ||
rt2800_init_registers(rt2x00dev) ||
rt2800pci_wait_wpdma_ready(rt2x00dev) ||
rt2800_init_bbp(rt2x00dev) ||
rt2800_init_rfcsr(rt2x00dev)))
return -EIO;
/*
* Send signal to firmware during boot time.
*/
rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
/*
* Enable RX.
*/
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
/*
* Initialize LED control
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
word & 0xff, (word >> 8) & 0xff);
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
word & 0xff, (word >> 8) & 0xff);
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
word & 0xff, (word >> 8) & 0xff);
return 0;
}
开发者ID:AdrianHuang，项目名称:uclinux-robutest，代码行数:58，代码来源:rt2800pci.c
示例5: rt2800pci_write_beacon
/*
* TX data initialization
*/
static void rt2800pci_write_beacon(struct queue_entry *entry)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
/*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
/*
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
rt2800_register_multiwrite(rt2x00dev,
beacon_base,
skbdesc->desc, skbdesc->desc_len);
rt2800_register_multiwrite(rt2x00dev,
beacon_base + skbdesc->desc_len,
entry->skb->data, entry->skb->len);
/*
* Clean up beacon skb.
*/
dev_kfree_skb_any(entry->skb);
entry->skb = NULL;
}
开发者ID:AdrianHuang，项目名称:uclinux-robutest，代码行数:35，代码来源:rt2800pci.c
示例6: rt2800pci_write_firmware
static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
u32 reg;
/*
* enable Host program ram write selection
*/
reg = 0;
rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
/*
* Write firmware to device.
*/
rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
data, len);
rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
return 0;
}
开发者ID:BreakDaLotus，项目名称:attitude_adjustment，代码行数:26，代码来源:rt2800pci.c
示例7: rt2400pci_disable_radio
static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
/*
* Disable LED
*/
rt2400pci_disable_led(rt2x00dev);
rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
/*
* Disable synchronisation.
*/
rt2x00pci_register_write(rt2x00dev, CSR14, 0);
/*
* Cancel RX and TX.
*/
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_ABORT, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
/*
* Disable interrupts.
*/
rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
}
开发者ID:PennPanda，项目名称:linux-repo，代码行数:28，代码来源:rt2400pci.c
示例8: rt2800pci_kill_tx_queue
static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid qid)
{
u32 reg;
if (qid == QID_BEACON) {
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0);
return;
}
rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
}
开发者ID:AdrianHuang，项目名称:uclinux-robutest，代码行数:17，代码来源:rt2800pci.c
示例9: rt2400pci_brightness_set
static void rt2400pci_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct rt2x00_led *led =
container_of(led_cdev, struct rt2x00_led, led_dev);
unsigned int enabled = brightness != LED_OFF;
u32 reg;
rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®);
if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
rt2x00_set_field32(®, LEDCSR_LINK, enabled);
else if (led->type == LED_TYPE_ACTIVITY)
rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled);
rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
}
开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:17，代码来源:rt2400pci.c
示例10: rt2400pci_config_duration
static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXCSR1, ®);
rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
rt2x00pci_register_read(rt2x00dev, CSR12, ®);
rt2x00_set_field32(®, CSR12_BEACON_INTERVAL,
libconf->conf->beacon_int * 16);
rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION,
libconf->conf->beacon_int * 16);
rt2x00pci_register_write(rt2x00dev, CSR12, reg);
}
开发者ID:artm1248，项目名称:linux，代码行数:17，代码来源:rt2400pci.c
示例11: rt2x00_dev_update_led
static void
rt2x00_dev_update_led(struct _rt2x00_pci *rt2x00pci, struct _rt2x00_config *config) {
u32 reg = 0x00000000;
rt2x00_register_read(rt2x00pci, LEDCSR, ®);
rt2x00_set_field32(®, LEDCSR_LINK, config->led_status ? 1 : 0);
rt2x00_register_write(rt2x00pci, LEDCSR, reg);
}
开发者ID:BackupTheBerlios，项目名称:rtnet-svn，代码行数:9，代码来源:rt_rt2500pci.c
示例12: rt2800usb_kick_tx_queue
static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue)
{
u32 reg;
if (queue != QID_BEACON) {
rt2x00usb_kick_tx_queue(rt2x00dev, queue);
return;
}
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
}
}
开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:18，代码来源:rt2800usb.c
示例13: rt2800usb_disable_radio
static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
/* Wait for DMA, ignore error */
rt2800_wait_wpdma_ready(rt2x00dev);
rt2x00usb_disable_radio(rt2x00dev);
}
开发者ID:12rafael，项目名称:jellytimekernel，代码行数:18，代码来源:rt2800usb.c
示例14: rt2800usb_write_beacon
/*
* TX data initialization
*/
static void rt2800usb_write_beacon(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
unsigned int beacon_base;
u32 reg;
/*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
/*
* Add the TXWI for the beacon to the skb.
*/
rt2800_write_txwi(entry->skb, txdesc);
skb_push(entry->skb, TXWI_DESC_SIZE);
/*
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, beacon_base,
entry->skb->data, entry->skb->len,
REGISTER_TIMEOUT32(entry->skb->len));
/*
* Enable beaconing again.
*/
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
/*
* Clean up the beacon skb.
*/
dev_kfree_skb(entry->skb);
entry->skb = NULL;
}
开发者ID:12rafael，项目名称:jellytimekernel，代码行数:47，代码来源:rt2800usb.c
示例15: rt2400pci_write_beacon
static void rt2400pci_write_beacon(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
u32 reg;
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
rt2x00queue_map_txskb(entry);
rt2400pci_write_tx_desc(entry, txdesc);
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:19，代码来源:rt2400pci.c
示例16: rt2400pci_init_rxentry
/*
* Initialization functions.
*/
static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry)
{
struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
u32 word;
rt2x00_desc_read(priv_rx->desc, 2, &word);
rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
entry->queue->data_size);
rt2x00_desc_write(priv_rx->desc, 2, word);
rt2x00_desc_read(priv_rx->desc, 1, &word);
rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma);
rt2x00_desc_write(priv_rx->desc, 1, word);
rt2x00_desc_read(priv_rx->desc, 0, &word);
rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
rt2x00_desc_write(priv_rx->desc, 0, word);
}
开发者ID:maraz，项目名称:linux-2.6，代码行数:22，代码来源:rt2400pci.c
示例17: rt2x00_dev_update_txpower
static void
rt2x00_dev_update_txpower(struct _rt2x00_pci *rt2x00pci, struct _rt2x00_config *config) {
u8 txpower = rt2x00_get_txpower(&rt2x00pci->chip, config->txpower);
DEBUG("Start.\n");
rt2x00_set_field32(&rt2x00pci->channel.rf3, RF3_TXPOWER, txpower);
rt2x00_rf_regwrite(rt2x00pci, rt2x00pci->channel.rf3);
}
开发者ID:BackupTheBerlios，项目名称:rtnet-svn，代码行数:10，代码来源:rt_rt2500pci.c
示例18: rt2400pci_toggle_rx
/*
* Device state switch handlers.
*/
static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
rt2x00_set_field32(®, RXCSR0_DISABLE_RX,
state == STATE_RADIO_RX_OFF);
rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
}
开发者ID:maraz，项目名称:linux-2.6，代码行数:13，代码来源:rt2400pci.c
示例19: rt2400pci_interrupt
static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
u32 reg, mask;
rt2x00pci_register_read(rt2x00dev, CSR7, ®);
rt2x00pci_register_write(rt2x00dev, CSR7, reg);
if (!reg)
return IRQ_NONE;
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
mask = reg;
if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
if (rt2x00_get_field32(reg, CSR7_RXDONE))
tasklet_schedule(&rt2x00dev->rxdone_tasklet);
if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING) ||
rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING) ||
rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) {
tasklet_schedule(&rt2x00dev->txstatus_tasklet);
rt2x00_set_field32(&mask, CSR8_TXDONE_TXRING, 1);
rt2x00_set_field32(&mask, CSR8_TXDONE_ATIMRING, 1);
rt2x00_set_field32(&mask, CSR8_TXDONE_PRIORING, 1);
}
spin_lock(&rt2x00dev->irqmask_lock);
rt2x00pci_register_read(rt2x00dev, CSR8, ®);
reg |= mask;
rt2x00pci_register_write(rt2x00dev, CSR8, reg);
spin_unlock(&rt2x00dev->irqmask_lock);
return IRQ_HANDLED;
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:43，代码来源:rt2400pci.c
示例20: rt2400pci_bbp_write
static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u8 value)
{
u32 reg;
mutex_lock(&rt2x00dev->csr_mutex);
if (WAIT_FOR_BBP(rt2x00dev, ®)) {
reg = 0;
rt2x00_set_field32(®, BBPCSR_VALUE, value);
rt2x00_set_field32(®, BBPCSR_REGNUM, word);
rt2x00_set_field32(®, BBPCSR_BUSY, 1);
rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1);
rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
}
mutex_unlock(&rt2x00dev->csr_mutex);
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:19，代码来源:rt2400pci.c
注：本文中的rt2x00_set_field32函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论