C++ rt_thread_delay函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rt_thread_delay函数的典型用法代码示例。如果您正苦于以下问题：C++ rt_thread_delay函数的具体用法？C++ rt_thread_delay怎么用？C++ rt_thread_delay使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rt_thread_delay函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: led_thread_entry

static void led_thread_entry(void* parameter)
{
    unsigned int count=0;
    rt_device_t led_dev=rt_device_find("led");
    rt_uint8_t led_value=0;
    while (1)
    {
        /* led1 on */
#ifndef RT_USING_FINSH
        rt_kprintf("led on, count : %d\r\n",count);
#endif
        count++;
        led_value=1;
        led_dev->write(led_dev,count%4,&led_value,1);
        rt_thread_delay( RT_TICK_PER_SECOND/2 ); /* sleep 0.5 second and switch to other thread */

        /* led1 off */
#ifndef RT_USING_FINSH
        rt_kprintf("led off\r\n");
#endif
        led_value=0;
        led_dev->write(led_dev,count%4,&led_value,1);
        rt_thread_delay( RT_TICK_PER_SECOND/2 );
    }
}

开发者ID:liuweiqi，项目名称:RealBoard4088，代码行数:25，代码来源:application.c

示例2: rt_thread_entry_led1

static void rt_thread_entry_led1(void* parameter)
{
//    GPIO_InitTypeDef  GPIO_InitStructure;

    /* GPIOD Periph clock enable */
//    RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOF, ENABLE);
	
		/* Configure PD12, PD13, PD14 and PD15 in output pushpull mode */
//     GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
//     GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
//     GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
//     GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
//     GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
//     GPIO_Init(GPIOF, &GPIO_InitStructure);

    while(1)
    {
			
//				GPIO_SetBits(GPIOF, GPIO_Pin_6);
//			print_temp();
				rt_thread_delay(20);
//				GPIO_ResetBits(GPIOF, GPIO_Pin_6);
				rt_thread_delay(20);
    }
}

开发者ID:dlts200466，项目名称:PowerSupply，代码行数:25，代码来源:application.c

示例3: led_thread_entry

static void led_thread_entry(void* parameter)
{
    /* LED : PB2 BOOT1 config. */
    {
        GPIO_InitTypeDef  GPIO_InitStructure;

        RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);

        GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
        /* output setting */
        GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_OUT;
        GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
        GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
        GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_NOPULL;
        GPIO_Init(GPIOB, &GPIO_InitStructure);
    }

    /* sys led blink. */
    while(1)
    {
        /* turn on led 20ms. */
        LED_SYS_ON();
        rt_thread_delay(RT_TICK_PER_SECOND/50);

        /* turn off led 1s. */
        LED_SYS_OFF();
        rt_thread_delay(RT_TICK_PER_SECOND);
    }
}

开发者ID:eyeye，项目名称:ART，代码行数:29，代码来源:application.c

示例4: thread_entry

static void thread_entry(void* parameter)
{
	rt_tick_t tick;
	rt_kprintf("thread inited ok\n");

	tick = rt_tick_get();
	rt_kprintf("thread delay 10 tick\n");
	rt_thread_delay(10);
	if (rt_tick_get() - tick > 10)
	{
		tc_done(TC_STAT_FAILED);
		return;
	}

	tick = rt_tick_get();
	rt_kprintf("thread delay 15 tick\n");
	rt_thread_delay(15);
	if (rt_tick_get() - tick > 15)
	{
		tc_done(TC_STAT_FAILED);
		return;
	}

	rt_kprintf("thread exit\n");

	tc_done(TC_STAT_PASSED);
}

开发者ID:aspirefhaha，项目名称:ad7606_stm32107，代码行数:27，代码来源:thread_delay.c

示例5: sonar_thread_entry

void sonar_thread_entry(void* parameter)
{
	rt_kprintf("start sonar\n");
	while(1)
	{
		GPIO_SetBits(GPIOE,GPIO_Pin_7);
		
		rt_thread_delay(RT_TICK_PER_SECOND*10/1000);
		
		GPIO_ResetBits(GPIOE,GPIO_Pin_7);
		
		rt_thread_delay(RT_TICK_PER_SECOND*50/1000);
		
		sonar_h=Moving_Median(PWM8_Time/58.0f*ahrs.g_z,sonar_avr,SAMPLE_COUNT);
		
		ahrs.height_v=HV_A*(ahrs.height_v+ahrs.height_acc*0.06f)+(1.0f-HV_A)*((sonar_h-ahrs.height)/0.06f);
		
		ahrs.height=sonar_h;
		h=(u16)sonar_h;
		sonar_state=sonar_h>3.0f&&sonar_h<150.0f;
		ahrs_state.sonar=!sonar_state;
		
		rt_event_send(&ahrs_event,AHRS_EVENT_SONAR);
	}
}

开发者ID:tcz717，项目名称:TPDT.FC_407，代码行数:25，代码来源:sonar.c

示例6: thread2_entry

/* 线程2的入口函数 */
static void thread2_entry(void* parameter)
{
	/* 线程2拥有较高的优先级，以抢占线程1而获得执行 */

	/* 线程2启动后先睡眠10个OS Tick */
	rt_thread_delay(10);

	/*
	 * 线程2唤醒后直接删除线程1，删除线程1后，线程1自动脱离就绪线程
	 * 队列
	 */
	rt_thread_delete(tid1);
	tid1 = RT_NULL;

	/*
	 * 线程2继续休眠10个OS Tick然后退出，线程2休眠后应切换到idle线程
	 * idle线程将执行真正的线程1控制块和线程栈的删除
	 */
	rt_thread_delay(10);

	/*
	 * 线程2运行结束后也将自动被删除(线程控制块和线程栈依然在idle线
	 * 程中释放)
	 */
	tid2 = RT_NULL;
}

开发者ID:CollinsLiu，项目名称:rt-thread-pc，代码行数:27，代码来源:thread_delete.c

示例7: msc_thread_entry

void msc_thread_entry(void *parameter)
{
    extern void player_ui_freeze(void);
    unsigned long test_unit_ready_start = rt_tick_get();
    test_unit_ready_last = test_unit_ready_start;

    /* wait connection */
    while( test_unit_ready_last == test_unit_ready_start )
    {
        rt_thread_delay( RT_TICK_PER_SECOND );
    }


    /* freeze player UI */
    player_ui_freeze();

    /* wait remove */
    while(1)
    {
        rt_thread_delay( RT_TICK_PER_SECOND/2 );
        if( rt_tick_get() - test_unit_ready_last > RT_TICK_PER_SECOND*2 )
        {
//            rt_kprintf("\r\nCable removed!\r\nSystemReset\r\n\r\n");
//            NVIC_SystemReset();
        }
    }
}

开发者ID:Manish-cimcon，项目名称:micro，代码行数:27，代码来源:usb_main.c

示例8: led1_thread_entry

static void led1_thread_entry(void* parameter)
{
  /*在LED1线程中初始化LED的GPIO配置*/

  LED_GPIO_Config();
  while(1)
  {
		//rt_kprintf ( "\r\n	LED1 is going!!!\r\n");
   LED1(ON);//点亮LED1
   rt_thread_delay(100);//调用RTT的API将当前线程挂起200ticks，也就是1sec
   LED1(OFF);//关闭LED1
		  rt_thread_delay(100);
		if(bMp3Play == 0)
   sys_wake_count++;
   if(sys_wake_count==sys_default_count)
   	{
		sys_wake_count=0;
		if(sys_wake)
			{
				sys_wake=0;
				rt_kprintf("系统进入休眠状态,如需使用请唤醒!\r\n");
			 rt_mb_send(&mb,(rt_uint32_t)sys_down_mp3);//发送邮件
			}
   }
  }
}

开发者ID:wuhaixiang，项目名称:VoiceCode，代码行数:26，代码来源:application.c

示例9: rt_usbh_hub_reset_port

/**
 * This function will rest hub port, it is invoked when sub device attached to the hub port.
 *
 * @param intf the interface instance.
 * @param port the hub port.
 * 
 * @return the error code, RT_EOK on successfully.
 */
rt_err_t rt_usbh_hub_reset_port(uhub_t hub, rt_uint16_t port)
{
    rt_err_t ret;
    rt_uint32_t pstatus;
    
    /* parameter check */
    RT_ASSERT(hub != RT_NULL);
    
    rt_thread_delay(50);

    /* reset hub port */
    ret = rt_usbh_hub_set_port_feature(hub, port, PORT_FEAT_RESET);
    if(ret != RT_EOK) return ret;

    while(1)
    {
        ret = rt_usbh_hub_get_port_status(hub, port, (rt_uint8_t*)&pstatus);
        if(!(pstatus & PORT_PRS)) break;
    }
    
    /* clear port reset feature */
    ret = rt_usbh_hub_clear_port_feature(hub, port, PORT_FEAT_C_RESET);    
    if(ret != RT_EOK) return ret;

    rt_thread_delay(50);    

    return RT_EOK;
}

开发者ID:DigFarmer，项目名称:aircraft，代码行数:36，代码来源:hub.c

示例10: USB_OTG_BSP_mDelay

/**
  * @brief  USB_OTG_BSP_mDelay
  *          This function provides delay time in milli sec
  * @param  msec : Value of delay required in milli sec
  * @retval None
  */
void USB_OTG_BSP_mDelay (const uint32_t msec)
{
    if(msec >= 10)
        rt_thread_delay(msec / 10);
    else
        rt_thread_delay(msec / 1);
}

开发者ID:ADTL，项目名称:realtouch-stm32f4，代码行数:13，代码来源:usb_bsp.c

示例11: rt_transfer_thread_entry

void rt_transfer_thread_entry(void *parameter)
{
//	rt_uint16_t ms_20=0,ms_100=0,ms_1000=0;
//	char buff[33];
	T_RC_Status data;
//	T_RC_Voltage voltage;
	T_RC_Sensor Sensor;
//	rt_uint32_t _temp[3];
//	rt_uint8_t i;
	
	rt_thread_delay(1000);
	
	for(;;)
	{
		//NRF24_Check_Event();
		/*Pms_20++;
		if(ms_20==100)
		{
			ms_20=0;
			for(i=0;i<3;i++)
			{	
				_temp[i]=read_battert_adc_value();
			}
			voltage.Voltage1=(float)_temp[0]/4095.0f*3.3f*2;
			voltage.Voltage2=(float)_temp[1]/4095.0f*3.3f*2;
			voltage.Voltage3=(float)_temp[2]/4095.0f*3.3f*2;
			Data_Send_Voltage(&voltage);
		}*/

#if 1
		data.ANGLE.rol=angleActual.rol;
		data.ANGLE.pit=angleActual.pit;
		data.ANGLE.yaw=angleActual.yaw;
		data.ALT_CSB=1234;
		data.ALT_PRS=1234;
		data.ARMED=0;
		Data_Send_Status(&data);

		Sensor.ACC.X=accelMpu.x;
		Sensor.ACC.Y=accelMpu.y;
		Sensor.ACC.Z=accelMpu.z;
		Sensor.GYR.X=gyroMpu.x;
		Sensor.GYR.Y=gyroMpu.y;
		Sensor.GYR.Z=gyroMpu.z;
		Sensor.MAG.X=magMpu.x;
		Sensor.MAG.Y=magMpu.y;
		Sensor.MAG.Z=magMpu.z;	

		Sensor.MAG.X=magCorrect.x;
		Sensor.MAG.Y=magCorrect.y;
		Sensor.MAG.Z=magCorrect.z;			
		Data_Send_Senser(&Sensor);
		
#endif
		rt_thread_delay(20);
		
	}
}

开发者ID:trigrass2，项目名称:MircoFlyV0.7，代码行数:58，代码来源:transfer_app.c

示例12: worker_thread_entry

static void worker_thread_entry(void* parameter)
{
    rt_thread_delay(5);
    for(worker_count = 0; worker_count < 5; worker_count++)
    {
        rt_kprintf("worker:count: %d\n", worker_count);
        rt_thread_delay(5);
    }
}

开发者ID:003900107，项目名称:realboard-lpc4088，代码行数:9，代码来源:demo.c

示例13: worker_thread_entry

static void worker_thread_entry(void* parameter)
{
    rt_thread_delay(5);
    for(worker_count = 0; worker_count < 10; worker_count++)
    {
        rt_kprintf("worker:  count: %d\n", worker_count);
    }
    rt_thread_delay(RT_TICK_PER_SECOND);
}

开发者ID:003900107，项目名称:realboard-lpc4088，代码行数:9，代码来源:demo.c

示例14: worker_thread_entry

static void worker_thread_entry(void* parameter)
{
	rt_thread_delay(10);

	while (1) {
		rt_sem_release(sem);
		rt_thread_delay(5);
	}
}

开发者ID:malooei，项目名称:yeejoin-workspace，代码行数:9，代码来源:semaphore_priority.c

示例15: rt_init_thread_entry

static void rt_init_thread_entry(void* parameter)
{
	rt_thread_t system_thread;
	rt_uint8_t buf[256];
	/* Initialization RT-Thread Components */
#ifdef RT_USING_COMPONENTS_INIT
	rt_components_init();
#endif

	/* Set finsh device */
#ifdef  RT_USING_FINSH
	finsh_set_device(RT_CONSOLE_DEVICE_NAME);
#endif  /* RT_USING_FINSH */
	rt_hw_led1_off();
	//cmx865a_init();


	unsigned int count=1000;
	rt_memset(buf,'\0',256);
	rt_hw_led_init();
//	rt_kprintf("led on, count : %d\r\n",count);
	//rt_sprintf(buf,"%s","- RT -    Thread Operating System");
		
	//	ST7585_Write_String(0,5,"- RT -    ");
	//ST7585_Write_String(0,4,"Thread Operating System");
	//	Draw_bat(3);
	//b(0,1);
r(0);
	while (1)
	{
		
		/* led1 on */
#ifdef RT_USING_FINSH
		rt_kprintf("led on , count : %d\r\n",count);
#endif
	
		
	//	rt_sprintf(buf,"led on , count : %d",count);
	//	ST7585_Write_String(0,5,buf);

		//test_cmx865a();
		count++;
		rt_hw_led1_off();
		rt_thread_delay( RT_TICK_PER_SECOND/2 ); /* sleep 0.5 second and switch to other thread */

		/* led1 off */
#ifdef RT_USING_FINSH
		rt_kprintf("led off\r\n");
#endif
	//	rt_sprintf(buf,"led off, count : %d",count);
	//	ST7585_Write_String(0,5,buf);

		rt_hw_led1_on();
		rt_thread_delay( RT_TICK_PER_SECOND/2 );
	}
}

开发者ID:blueskycoco，项目名称:dm3730-spi，代码行数:56，代码来源:application.c

示例16: thread1_entry

static void thread1_entry(void* parameter)					
{
    while(1)
    {
			Led_Control(0,1);
			rt_thread_delay(RT_TICK_PER_SECOND);
			Led_Control(0,0);
			rt_thread_delay(RT_TICK_PER_SECOND);
    }
}

开发者ID:Coing，项目名称:rt-thread，代码行数:10，代码来源:demo_thread.c

示例17: rt_vam_thread_entry

void rt_vam_thread_entry(void *parameter)
{
	vam_stastatus_t location ;
	rt_thread_delay(500);
	timer_start();
	while(1){
		_vsm_get_local_status(&location) ;
		rt_thread_delay(10);
	}
}

开发者ID:gexueyuan，项目名称:cct，代码行数:10，代码来源:cv_vam_lip.c

示例18: led_thread_entry

static void led_thread_entry(void *parameter)
{
    while (1)
    {
        led_on();
        rt_thread_delay(RT_TICK_PER_SECOND);
        led_off();
        rt_thread_delay(RT_TICK_PER_SECOND);
    }
}

开发者ID:cedar-renjun，项目名称:air-conditioning-assistant，代码行数:10，代码来源:drv_led.c

示例19: osd_test

void osd_test(void)
{	u8 t;
		OLED_Init();			//3?¨º??¡¥OLED  
		OLED_Clear()  	; 
	
		t=' ';
		OLED_ShowCHinese(0,0,0);//?D
				OLED_ShowCHinese(18,0,1);//?¡ã
		OLED_ShowCHinese(36,0,2);//?¡ã
		OLED_ShowCHinese(54,0,3);//¦Ì?
		OLED_ShowCHinese(72,0,4);//¡Á¨®
		OLED_ShowCHinese(90,0,5);//??
		OLED_ShowCHinese(108,0,6);//??
	while(1) 
	{		
		OLED_Clear();
		OLED_ShowCHinese(0,0,0);//?D
		OLED_ShowCHinese(18,0,1);//?¡ã
		OLED_ShowCHinese(36,0,2);//?¡ã
		OLED_ShowCHinese(54,0,3);//¦Ì?
		OLED_ShowCHinese(72,0,4);//¡Á¨®
		OLED_ShowCHinese(90,0,5);//??
		OLED_ShowCHinese(108,0,6);//??
		OLED_ShowString(6,3,"0.96' OLED TEST",16);

				OLED_ShowString(6,4,"0.96' OLED TEST",16);
		OLED_ShowString(0,5,"0.96' OLED TEST",16);

		OLED_ShowString(0,6,"0.96' OLED TEST",16);
		OLED_ShowString(1,7,"0.96' OLED TEST",16);

		OLED_ShowString(6,3,"0.96' OLED TEST",16);

		//OLED_ShowString(8,2,"ZHONGJINGYUAN");  
	 //	OLED_ShowString(20,4,"2014/05/01");  
		OLED_ShowString(0,6,"ASCII:",16);  
		OLED_ShowString(63,6,"CODE:",16);  
		OLED_ShowChar(48,6,t,16);//??¨º?ASCII¡Á?¡¤?	   
		t++;
		if(t>'~')t=' ';
		OLED_ShowNum(103,6,t,3,16);//??¨º?ASCII¡Á?¡¤?¦Ì????¦Ì 	
		rt_thread_delay(1000*3);


		OLED_DrawBMP(0,0,128,8,BMP1);  //¨ª?????¨º?(¨ª?????¨º?¨¦¡Â¨®?¡ê?¨¦¨²3¨¦¦Ì?¡Á?¡À¨ª??¡ä¨®¡ê??¨¢??¨®????¨¤????¡ê?FLASH????8K¨°???¨¦¡Â¨®?)
		rt_thread_delay(1000*3);

		OLED_DrawBMP(0,0,128,8,BMP1);
		rt_thread_delay(1000*3);


	}	
	
}

开发者ID:pigeon0411，项目名称:eb120_ec11_new，代码行数:54，代码来源:osd_menu.c

示例20: rt_led_thread_entry

void rt_led_thread_entry(void* parameter)
{
	while(1)
	{
		/* light on leds for one second */
		rt_thread_delay(100);

		/* light off leds for one second */
		rt_thread_delay(100);
	}
}

开发者ID:54chenjq，项目名称:rt-thread，代码行数:11，代码来源:application.c

注：本文中的rt_thread_delay函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rt_thread_idle_init函数代码示例发布时间：2022-05-30

C++ rt_task_wait_period函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17960|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9565|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9305|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rt_thread_delay函数代码示例

示例1: led_thread_entry

示例2: rt_thread_entry_led1

示例3: led_thread_entry

示例4: thread_entry

示例5: sonar_thread_entry

示例6: thread2_entry

示例7: msc_thread_entry

示例8: led1_thread_entry

示例9: rt_usbh_hub_reset_port

示例10: USB_OTG_BSP_mDelay

示例11: rt_transfer_thread_entry

示例12: worker_thread_entry

示例13: worker_thread_entry

示例14: worker_thread_entry

示例15: rt_init_thread_entry

示例16: thread1_entry

示例17: rt_vam_thread_entry

示例18: led_thread_entry

示例19: osd_test

示例20: rt_led_thread_entry

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-33743

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

prabhakar267/library-management-system:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053