C++ rtc_device_register函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtc_device_register函数的典型用法代码示例。如果您正苦于以下问题：C++ rtc_device_register函数的具体用法？C++ rtc_device_register怎么用？C++ rtc_device_register使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtc_device_register函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: twl_rtc_probe

static int twl_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	int ret = -EINVAL;
	int irq = platform_get_irq(pdev, 0);
	u8 rd_reg;

	if (irq <= 0)
		goto out1;

	ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
	if (ret < 0)
		goto out1;

	if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
		dev_warn(&pdev->dev, "Power up reset detected.\n");

	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
		dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");

	/* Clear RTC Power up reset and pending alarm interrupts */
	ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
	if (ret < 0)
		goto out1;

	if (twl_class_is_6030()) {
		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
			REG_INT_MSK_LINE_A);
		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
			REG_INT_MSK_STS_A);
	}

	dev_info(&pdev->dev, "Enabling TWL-RTC\n");
	ret = twl_rtc_write_u8(BIT_RTC_CTRL_REG_STOP_RTC_M, REG_RTC_CTRL_REG);
	if (ret < 0)
		goto out1;

	/* ensure interrupts are disabled, bootloaders can be strange */
	ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG);
	if (ret < 0)
		dev_warn(&pdev->dev, "unable to disable interrupt\n");

	/* init cached IRQ enable bits */
	ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
	if (ret < 0)
		goto out1;

	rtc = rtc_device_register(pdev->name,
				  &pdev->dev, &twl_rtc_ops, THIS_MODULE);
	if (IS_ERR(rtc)) {
		ret = PTR_ERR(rtc);
		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
			PTR_ERR(rtc));
		goto out1;
	}

	ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
				   dev_name(&rtc->dev), rtc);
	if (ret < 0) {
		dev_err(&pdev->dev, "IRQ is not free.\n");
		goto out2;
	}

	platform_set_drvdata(pdev, rtc);
	device_init_wakeup(&pdev->dev, 1);
	return 0;

out2:
	rtc_device_unregister(rtc);
out1:
	return ret;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:73，代码来源:rtc-twl.c

示例2: AMI8563_probe

static int AMI8563_probe(struct i2c_adapter *adapter, int address, int kind)
{
	struct AMI8563 *pAMI8563 = NULL;
	struct i2c_client *client = NULL;
	struct rtc_device *rtc = NULL;
	u8 value = 0;
	int err = 0;
	
	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
		err = -ENODEV;
		goto exit;
	}

	if(address != AMI8563_ADDR) {
		err = -EIO;
		goto exit;
	}

	if (!(pAMI8563 = kzalloc(sizeof(struct AMI8563), GFP_KERNEL))) {
		err = -ENOMEM;
		goto exit;
	}
	
	pAMI8563->alarm_status_power_on = 0;	
	client = &pAMI8563->client;
	client->addr = address;
	client->driver = &AMI8563_driver;
	client->adapter = adapter;
	strlcpy(client->name, AMI8563_driver.driver.name, I2C_NAME_SIZE);

	/* detect chip and check the alarm status*/
	err = i2c_ami8563_read(client, AMI8563_REG_ST2);
	if (err<0) {		
		goto exit_kfree;
	} else if (err&0x08) {
		ami8563_info("Power up as alarm on\n");
		pAMI8563->alarm_status_power_on = 1;
	}

	value = i2c_ami8563_read(client, AMI8563_REG_YR);
	ami8563_info("current year %d\n", value);
	value = bcd2bin(value);
#define CURRENT_YEAR (9) // 2009
	if (value>30 || value<CURRENT_YEAR) {
		ami8563_err("Detect invalid year %d, reset to default\n", value+2000);
		i2c_ami8563_write(client, AMI8563_REG_YR, bin2bcd(CURRENT_YEAR));
	}

	if ((err = i2c_attach_client(client)))
		goto exit_kfree;

	rtc = rtc_device_register(AMI8563_driver.driver.name, &client->dev,
				&AMI8563_rtc_ops, THIS_MODULE);
	if (IS_ERR(rtc)) {
		err = PTR_ERR(rtc);
		goto exit_detach;
	}

	i2c_set_clientdata(client, rtc);
	g_client = client;

	/*Clear AF,enable AIE*/
	//micco_enable_rtc_alarm_irq(0);
	value = i2c_ami8563_read(client, AMI8563_REG_ST2);
	value &= ~0x1<<3;
	value |= 0x1<<1;
	i2c_ami8563_write(client, AMI8563_REG_ST2, value);
	micco_enable_rtc_alarm_irq(1);
		
	//err = pmic_callback_register(PMIC_EVENT_EXTON, AMI8563_alarm_event_handler);
	
	AMI8563_sync_pxa3xx_rtc(client);

	register_reboot_notifier(&ami_sys_reboot_nb); /* for enter into recovery mode */
#ifdef CONFIG_YUHUA_MISC_DEV	
	set_rtc_detect(1);
#endif
	
	printk("Rtc ami8563 drv register succ\n");
	return 0;

exit_detach:
	i2c_detach_client(client);
exit_kfree:
	kfree(pAMI8563);
exit:
	ami8563_err("err %d\n", err);
	return err;
}

开发者ID:abgoyal，项目名称:OpenX2-kernel-original，代码行数:89，代码来源:rtc-ami8563.c

示例3: tps65910_rtc_probe

static int tps65910_rtc_probe(struct platform_device *pdev)
{
	struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
	struct tps65910_rtc *tps65910_rtc;
	int per_irq;
	int alm_irq;
	int ret = 0;
	u8 rtc_ctl;
	
	struct rtc_time tm;
	struct rtc_time tm_def = {	//	2012.1.1 12:00:00 Saturday
			.tm_wday = 6,
			.tm_year = 111,
			.tm_mon = 0,
			.tm_mday = 1,
			.tm_hour = 12,
			.tm_min = 0,
			.tm_sec = 0,
		};
	
	tps65910_rtc = kzalloc(sizeof(*tps65910_rtc), GFP_KERNEL);
	if (tps65910_rtc == NULL)
		return -ENOMEM;

	platform_set_drvdata(pdev, tps65910_rtc);
	tps65910_rtc->tps65910 = tps65910;
	per_irq = tps65910->irq_base + TPS65910_IRQ_RTC_PERIOD;
	alm_irq = tps65910->irq_base + TPS65910_IRQ_RTC_ALARM;
	
	/* Take rtc out of reset */
	ret = tps65910_reg_read(tps65910, TPS65910_DEVCTRL);
	if (ret < 0) {
		dev_err(&pdev->dev, "Failed to read TPS65910_DEVCTRL: %d\n", ret);
		return ret;
	}

	if(ret & BIT_RTC_PWDN)
	{
		rtc_ctl = ret & (~BIT_RTC_PWDN);

		ret = tps65910_reg_write(tps65910, TPS65910_DEVCTRL, rtc_ctl);
		if (ret < 0) {
			dev_err(&pdev->dev, "Failed to write RTC control: %d\n", ret);
			return ret;
		}
	}
	
	/*start rtc default*/
	ret = tps65910_reg_read(tps65910, TPS65910_RTC_CTRL);
	if (ret < 0) {
		dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret);
		return ret;
	}

	if(!(ret & BIT_RTC_CTRL_REG_STOP_RTC_M))
	{
		rtc_ctl = ret | BIT_RTC_CTRL_REG_STOP_RTC_M;

		ret = tps65910_reg_write(tps65910, TPS65910_RTC_CTRL, rtc_ctl);
		if (ret < 0) {
			dev_err(&pdev->dev, "Failed to write RTC control: %d\n", ret);
			return ret;
		}
	}
	
	ret = tps65910_reg_read(tps65910, TPS65910_RTC_STATUS);
	if (ret < 0) {
		dev_err(&pdev->dev, "Failed to read RTC status: %d\n", ret);
		return ret;
	}
		
	/*set init time*/
	ret = tps65910_rtc_readtime(&pdev->dev, &tm);
	if (ret)
	{
		dev_err(&pdev->dev, "Failed to read RTC time\n");
		return ret;
	}
	
	ret = rtc_valid_tm(&tm);
	if (ret) {
		dev_err(&pdev->dev,"invalid date/time and init time\n");
		tps65910_rtc_set_time(&pdev->dev, &tm_def); // 2011-01-01 12:00:00
		dev_info(&pdev->dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
				1900 + tm_def.tm_year, tm_def.tm_mon + 1, tm_def.tm_mday, tm_def.tm_wday,
				tm_def.tm_hour, tm_def.tm_min, tm_def.tm_sec);
	}

	device_init_wakeup(&pdev->dev, 1);

	tps65910_rtc->rtc = rtc_device_register("tps65910", &pdev->dev,
					      &tps65910_rtc_ops, THIS_MODULE);
	if (IS_ERR(tps65910_rtc->rtc)) {
		ret = PTR_ERR(tps65910_rtc->rtc);
		goto err;
	}

	/*request rtc and alarm irq of tps65910*/
	ret = request_threaded_irq(per_irq, NULL, tps65910_per_irq,
				   IRQF_TRIGGER_RISING, "RTC period",
//.........这里部分代码省略.........

开发者ID:thermal83，项目名称:kernel_rk3026，代码行数:101，代码来源:rtc-tps65910.c

示例4: s2mps11_rtc_probe

static int __devinit s2mps11_rtc_probe(struct platform_device *pdev)
{
	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
	struct sec_pmic_platform_data *pdata = dev_get_platdata(iodev->dev);
	struct s2mps11_rtc_info *s2mps11;
	int ret;

	s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_rtc_info),
				GFP_KERNEL);
	if (!s2mps11)
		return -ENOMEM;

	s2mps11->dev = &pdev->dev;
	s2mps11->iodev = iodev;

	s2mps11->wtsr_smpl = pdata->wtsr_smpl;
	s2mps11->jig_smpl_disable = pdata->jig_smpl_disable;

	s2mps11->irq = pdata->irq_base + S2MPS11_IRQ_RTCA0;

	platform_set_drvdata(pdev, s2mps11);

	ret = s2mps11_rtc_init_reg(s2mps11);
	if (ret < 0) {
		dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret);
		goto out_rtc;
	}

	pmic_is_jig_attached = s2mps11_rtc_is_jigonb_low(s2mps11);

	if (s2mps11->jig_smpl_disable && pmic_is_jig_attached)
		s2mps11->wtsr_smpl = false;
	if (s2mps11->wtsr_smpl) {
		s2mps11_rtc_enable_wtsr(s2mps11, true);
		s2mps11_rtc_enable_smpl(s2mps11, true);
	} else {
		s2mps11_rtc_enable_wtsr(s2mps11, false);
		s2mps11_rtc_enable_smpl(s2mps11, false);
	}

	device_init_wakeup(&pdev->dev, true);

	s2mps11->rtc_dev = rtc_device_register("s2mps11-rtc", &pdev->dev,
			&s2mps11_rtc_ops, THIS_MODULE);

	if (IS_ERR(s2mps11->rtc_dev)) {
		ret = PTR_ERR(s2mps11->rtc_dev);
		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
		goto out_rtc;
	}

	ret = request_threaded_irq(s2mps11->irq, NULL, s2mps11_rtc_alarm_irq, 0,
			"rtc-alarm0", s2mps11);

	if (ret < 0)
		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
			s2mps11->irq, ret);

	return 0;

out_rtc:
	devm_kfree(&pdev->dev, s2mps11);
	platform_set_drvdata(pdev, NULL);
	return ret;
}

开发者ID:Svard73，项目名称:SM-T700-T705-Kernel，代码行数:65，代码来源:rtc-sec.c

示例5: rs5c348_probe

static int __devinit rs5c348_probe(struct spi_device *spi)
{
	int ret;
	struct rtc_device *rtc;
	struct rs5c348_plat_data *pdata;

	pdata = kzalloc(sizeof(struct rs5c348_plat_data), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;
	spi->dev.platform_data = pdata;

	/* Check D7 of SECOND register */
	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
	if (ret < 0 || (ret & 0x80)) {
		dev_err(&spi->dev, "not found.\n");
		goto kfree_exit;
	}

	dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
	dev_info(&spi->dev, "spiclk %u KHz.\n",
		 (spi->max_speed_hz + 500) / 1000);

	/* turn RTC on if it was not on */
	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
	if (ret < 0)
		goto kfree_exit;
	if (ret & (RS5C348_BIT_XSTP | RS5C348_BIT_VDET)) {
		u8 buf[2];
		struct rtc_time tm;
		if (ret & RS5C348_BIT_VDET)
			dev_warn(&spi->dev, "voltage-low detected.\n");
		if (ret & RS5C348_BIT_XSTP)
			dev_warn(&spi->dev, "oscillator-stop detected.\n");
		rtc_time_to_tm(0, &tm);	/* 1970/1/1 */
		ret = rs5c348_rtc_set_time(&spi->dev, &tm);
		if (ret < 0)
			goto kfree_exit;
		buf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
		buf[1] = 0;
		ret = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
		if (ret < 0)
			goto kfree_exit;
	}

	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
	if (ret < 0)
		goto kfree_exit;
	if (ret & RS5C348_BIT_24H)
		pdata->rtc_24h = 1;

	rtc = rtc_device_register(rs5c348_driver.driver.name, &spi->dev,
				  &rs5c348_rtc_ops, THIS_MODULE);

	if (IS_ERR(rtc)) {
		ret = PTR_ERR(rtc);
		goto kfree_exit;
	}

	pdata->rtc = rtc;

	return 0;
 kfree_exit:
	kfree(pdata);
	return ret;
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:65，代码来源:rtc-rs5c348.c

示例6: vrtc_mrst_do_probe

static int __devinit
vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
{
	int retval = 0;
	unsigned char rtc_control;

	/* There can be only one ... */
	if (mrst_rtc.dev)
		return -EBUSY;

	if (!iomem)
		return -ENODEV;

	iomem = request_mem_region(iomem->start, resource_size(iomem),
				   driver_name);
	if (!iomem) {
		dev_dbg(dev, "i/o mem already in use.\n");
		return -EBUSY;
	}

	mrst_rtc.irq = rtc_irq;
	mrst_rtc.iomem = iomem;
	mrst_rtc.dev = dev;
	dev_set_drvdata(dev, &mrst_rtc);

	mrst_rtc.rtc = rtc_device_register(driver_name, dev,
				&mrst_rtc_ops, THIS_MODULE);
	if (IS_ERR(mrst_rtc.rtc)) {
		retval = PTR_ERR(mrst_rtc.rtc);
		goto cleanup0;
	}

	rename_region(iomem, dev_name(&mrst_rtc.rtc->dev));

	spin_lock_irq(&rtc_lock);
	mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE);
	rtc_control = vrtc_cmos_read(RTC_CONTROL);
	spin_unlock_irq(&rtc_lock);

	if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))
		dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n");

	if (rtc_irq) {
		retval = request_irq(rtc_irq, mrst_rtc_irq,
				IRQF_DISABLED, dev_name(&mrst_rtc.rtc->dev),
				mrst_rtc.rtc);
		if (retval < 0) {
			dev_dbg(dev, "IRQ %d is already in use, err %d\n",
				rtc_irq, retval);
			goto cleanup1;
		}
	}
	dev_dbg(dev, "initialised\n");
	return 0;

cleanup1:
	rtc_device_unregister(mrst_rtc.rtc);
cleanup0:
	dev_set_drvdata(dev, NULL);
	mrst_rtc.dev = NULL;
	release_mem_region(iomem->start, resource_size(iomem));
	dev_err(dev, "rtc-mrst: unable to initialise\n");
	return retval;
}

开发者ID:454053205，项目名称:linux，代码行数:64，代码来源:rtc-mrst.c

示例7: twl4030_rtc_probe

static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	int ret = 0;
	int irq = platform_get_irq(pdev, 0);
	u8 rd_reg;

	if (irq < 0)
		return irq;

	rtc = rtc_device_register(pdev->name,
				  &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
	if (IS_ERR(rtc)) {
		ret = -EINVAL;
		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
			PTR_ERR(rtc));
		goto out0;

	}

	platform_set_drvdata(pdev, rtc);

	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);

	if (ret < 0)
		goto out1;

	if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
		dev_warn(&pdev->dev, "Power up reset detected.\n");

	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
		dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");

	/* Clear RTC Power up reset and pending alarm interrupts */
	ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
	if (ret < 0)
		goto out1;

	ret = request_irq(irq, twl4030_rtc_interrupt,
				IRQF_TRIGGER_RISING,
				rtc->dev.bus_id, rtc);
	if (ret < 0) {
		dev_err(&pdev->dev, "IRQ is not free.\n");
		goto out1;
	}

	/* Check RTC module status, Enable if it is off */
	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
	if (ret < 0)
		goto out2;

	if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
		dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
		rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
		ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
		if (ret < 0)
			goto out2;
	}

	/* init cached IRQ enable bits */
	ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
	if (ret < 0)
		goto out2;

	return ret;


out2:
	free_irq(irq, rtc);
out1:
	rtc_device_unregister(rtc);
out0:
	return ret;
}

开发者ID:masbog，项目名称:iphonelinux-kernel，代码行数:74，代码来源:rtc-twl4030.c

示例8: s3c_rtc_probe

static int __devinit s3c_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	struct rtc_time rtc_tm;
	struct resource *res;
	int ret;
	int tmp;

	pr_debug("%s: probe=%p\n", __func__, pdev);

	

	s3c_rtc_tickno = platform_get_irq(pdev, 1);
	if (s3c_rtc_tickno < 0) {
		dev_err(&pdev->dev, "no irq for rtc tick\n");
		return -ENOENT;
	}

	s3c_rtc_alarmno = platform_get_irq(pdev, 0);
	if (s3c_rtc_alarmno < 0) {
		dev_err(&pdev->dev, "no irq for alarm\n");
		return -ENOENT;
	}

	pr_debug("s3c2410_rtc: tick irq %d, alarm irq %d\n",
		 s3c_rtc_tickno, s3c_rtc_alarmno);

	

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (res == NULL) {
		dev_err(&pdev->dev, "failed to get memory region resource\n");
		return -ENOENT;
	}

	s3c_rtc_mem = request_mem_region(res->start, resource_size(res),
					 pdev->name);

	if (s3c_rtc_mem == NULL) {
		dev_err(&pdev->dev, "failed to reserve memory region\n");
		ret = -ENOENT;
		goto err_nores;
	}

	s3c_rtc_base = ioremap(res->start, resource_size(res));
	if (s3c_rtc_base == NULL) {
		dev_err(&pdev->dev, "failed ioremap()\n");
		ret = -EINVAL;
		goto err_nomap;
	}

	rtc_clk = clk_get(&pdev->dev, "rtc");
	if (IS_ERR(rtc_clk)) {
		dev_err(&pdev->dev, "failed to find rtc clock source\n");
		ret = PTR_ERR(rtc_clk);
		rtc_clk = NULL;
		goto err_clk;
	}

	clk_enable(rtc_clk);

	

	s3c_rtc_enable(pdev, 1);

	pr_debug("s3c2410_rtc: RTCCON=%02x\n",
		 readw(s3c_rtc_base + S3C2410_RTCCON));

	device_init_wakeup(&pdev->dev, 1);

	

	rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops,
				  THIS_MODULE);

	if (IS_ERR(rtc)) {
		dev_err(&pdev->dev, "cannot attach rtc\n");
		ret = PTR_ERR(rtc);
		goto err_nortc;
	}

	s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev);

	

	s3c_rtc_gettime(NULL, &rtc_tm);

	if (rtc_valid_tm(&rtc_tm)) {
		rtc_tm.tm_year	= 100;
		rtc_tm.tm_mon	= 0;
		rtc_tm.tm_mday	= 1;
		rtc_tm.tm_hour	= 0;
		rtc_tm.tm_min	= 0;
		rtc_tm.tm_sec	= 0;

		s3c_rtc_settime(NULL, &rtc_tm);

		dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
	}

//.........这里部分代码省略.........

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:101，代码来源:rtc-s3c.c

示例9: s3c_rtc_probe

static int __devinit s3c_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	struct rtc_time rtc_tm;
	struct resource *res;
	int ret;

	pr_debug("%s: probe=%p\n", __func__, pdev);

	/* find the IRQs */

	s3c_rtc_tickno = platform_get_irq(pdev, 1);
	if (s3c_rtc_tickno < 0) {
		dev_err(&pdev->dev, "no irq for rtc tick\n");
		return -ENOENT;
	}

	s3c_rtc_alarmno = platform_get_irq(pdev, 0);
	if (s3c_rtc_alarmno < 0) {
		dev_err(&pdev->dev, "no irq for alarm\n");
		return -ENOENT;
	}

	pr_debug("s3c2410_rtc: tick irq %d, alarm irq %d\n",
		 s3c_rtc_tickno, s3c_rtc_alarmno);

	/* get the memory region */

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (res == NULL) {
		dev_err(&pdev->dev, "failed to get memory region resource\n");
		return -ENOENT;
	}

	s3c_rtc_mem = request_mem_region(res->start,
					 res->end-res->start+1,
					 pdev->name);

	if (s3c_rtc_mem == NULL) {
		dev_err(&pdev->dev, "failed to reserve memory region\n");
		ret = -ENOENT;
		goto err_nores;
	}

	s3c_rtc_base = ioremap(res->start, res->end - res->start + 1);
	if (s3c_rtc_base == NULL) {
		dev_err(&pdev->dev, "failed ioremap()\n");
		ret = -EINVAL;
		goto err_nomap;
	}

	rtc_clk = clk_get(&pdev->dev, "rtc");
	if (IS_ERR(rtc_clk)) {
		dev_err(&pdev->dev, "failed to find rtc clock source\n");
		ret = PTR_ERR(rtc_clk);
		rtc_clk = NULL;
		goto err_clk;
	}

	clk_enable(rtc_clk);

	/* check to see if everything is setup correctly */

	s3c_rtc_enable(pdev, 1);

	pr_debug("s3c2410_rtc: RTCCON=%02x\n",
		 readw(s3c_rtc_base + S3C2410_RTCCON));

	device_init_wakeup(&pdev->dev, 1);

	/* register RTC and exit */

	rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops,
				  THIS_MODULE);

	if (IS_ERR(rtc)) {
		dev_err(&pdev->dev, "cannot attach rtc\n");
		ret = PTR_ERR(rtc);
		goto err_nortc;
	}

	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;

	/* Check RTC Time */

	s3c_rtc_gettime(NULL, &rtc_tm);

	if (rtc_valid_tm(&rtc_tm)) {
		rtc_tm.tm_year	= 100;
		rtc_tm.tm_mon	= 0;
		rtc_tm.tm_mday	= 1;
		rtc_tm.tm_hour	= 0;
		rtc_tm.tm_min	= 0;
		rtc_tm.tm_sec	= 0;

		s3c_rtc_settime(NULL, &rtc_tm);

		dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
	}

//.........这里部分代码省略.........

开发者ID:blueskycoco，项目名称:linux-2.6.35-s3c2440，代码行数:101，代码来源:rtc-s3c-new.c

示例10: stk17ta8_rtc_probe

static int __init stk17ta8_rtc_probe(struct platform_device *pdev)
{
    struct rtc_device *rtc;
    struct resource *res;
    unsigned int cal;
    unsigned int flags;
    struct rtc_plat_data *pdata;
    void __iomem *ioaddr = NULL;
    int ret = 0;

    res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
    if (!res)
        return -ENODEV;

    pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
    if (!pdata)
        return -ENOMEM;
    pdata->irq = -1;
    if (!request_mem_region(res->start, RTC_REG_SIZE, pdev->name)) {
        ret = -EBUSY;
        goto out;
    }
    pdata->baseaddr = res->start;
    ioaddr = ioremap(pdata->baseaddr, RTC_REG_SIZE);
    if (!ioaddr) {
        ret = -ENOMEM;
        goto out;
    }
    pdata->ioaddr = ioaddr;
    pdata->irq = platform_get_irq(pdev, 0);

    /* turn RTC on if it was not on */
    cal = readb(ioaddr + RTC_CALIBRATION);
    if (cal & RTC_STOP) {
        cal &= RTC_CAL_MASK;
        flags = readb(ioaddr + RTC_FLAGS);
        writeb(flags | RTC_WRITE, ioaddr + RTC_FLAGS);
        writeb(cal, ioaddr + RTC_CALIBRATION);
        writeb(flags & ~RTC_WRITE, ioaddr + RTC_FLAGS);
    }
    if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_PF)
        dev_warn(&pdev->dev, "voltage-low detected.\n");

    if (pdata->irq >= 0) {
        writeb(0, ioaddr + RTC_INTERRUPTS);
        if (request_irq(pdata->irq, stk17ta8_rtc_interrupt,
                        IRQF_DISABLED | IRQF_SHARED,
                        pdev->name, pdev) < 0) {
            dev_warn(&pdev->dev, "interrupt not available.\n");
            pdata->irq = -1;
        }
    }

    rtc = rtc_device_register(pdev->name, &pdev->dev,
                              &stk17ta8_rtc_ops, THIS_MODULE);
    if (IS_ERR(rtc)) {
        ret = PTR_ERR(rtc);
        goto out;
    }
    pdata->rtc = rtc;
    pdata->last_jiffies = jiffies;
    platform_set_drvdata(pdev, pdata);
    ret = sysfs_create_bin_file(&pdev->dev.kobj, &stk17ta8_nvram_attr);
    if (ret)
        goto out;
    return 0;
out:
    if (pdata->rtc)
        rtc_device_unregister(pdata->rtc);
    if (pdata->irq >= 0)
        free_irq(pdata->irq, pdev);
    if (ioaddr)
        iounmap(ioaddr);
    if (pdata->baseaddr)
        release_mem_region(pdata->baseaddr, RTC_REG_SIZE);
    kfree(pdata);
    return ret;
}

开发者ID:liuyang201666，项目名称:linux-akae，代码行数:78，代码来源:rtc-stk17ta8.c

示例11: ds1511_rtc_probe

static int ds1511_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	struct resource *res;
	struct rtc_plat_data *pdata;
	int ret = 0;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		return -ENODEV;
	}
	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;
	pdata->size = resource_size(res);
	if (!devm_request_mem_region(&pdev->dev, res->start, pdata->size,
			pdev->name))
		return -EBUSY;
	ds1511_base = devm_ioremap(&pdev->dev, res->start, pdata->size);
	if (!ds1511_base)
		return -ENOMEM;
	pdata->ioaddr = ds1511_base;
	pdata->irq = platform_get_irq(pdev, 0);

	/*
	 * turn on the clock and the crystal, etc.
	 */
	rtc_write(0, RTC_CMD);
	rtc_write(0, RTC_CMD1);
	/*
	 * clear the wdog counter
	 */
	rtc_write(0, DS1511_WD_MSEC);
	rtc_write(0, DS1511_WD_SEC);
	/*
	 * start the clock
	 */
	rtc_enable_update();

	/*
	 * check for a dying bat-tree
	 */
	if (rtc_read(RTC_CMD1) & DS1511_BLF1) {
		dev_warn(&pdev->dev, "voltage-low detected.\n");
	}

	spin_lock_init(&pdata->lock);
	platform_set_drvdata(pdev, pdata);
	/*
	 * if the platform has an interrupt in mind for this device,
	 * then by all means, set it
	 */
	if (pdata->irq > 0) {
		rtc_read(RTC_CMD1);
		if (devm_request_irq(&pdev->dev, pdata->irq, ds1511_interrupt,
			IRQF_SHARED, pdev->name, pdev) < 0) {

			dev_warn(&pdev->dev, "interrupt not available.\n");
			pdata->irq = 0;
		}
	}

	rtc = rtc_device_register(pdev->name, &pdev->dev, &ds1511_rtc_ops,
		THIS_MODULE);
	if (IS_ERR(rtc))
		return PTR_ERR(rtc);
	pdata->rtc = rtc;

	ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr);
	if (ret)
		rtc_device_unregister(pdata->rtc);
	return ret;
}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:73，代码来源:rtc-ds1511.c

示例12: jz4740_rtc_probe

static int __devinit jz4740_rtc_probe(struct platform_device *pdev)
{
	int ret;
	struct jz4740_rtc *rtc;
	uint32_t scratchpad;

	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
	if (!rtc)
		return -ENOMEM;

	rtc->irq = platform_get_irq(pdev, 0);
	if (rtc->irq < 0) {
		ret = -ENOENT;
		dev_err(&pdev->dev, "Failed to get platform irq\n");
		goto err_free;
	}

	rtc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!rtc->mem) {
		ret = -ENOENT;
		dev_err(&pdev->dev, "Failed to get platform mmio memory\n");
		goto err_free;
	}

	rtc->mem = request_mem_region(rtc->mem->start, resource_size(rtc->mem),
					pdev->name);
	if (!rtc->mem) {
		ret = -EBUSY;
		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
		goto err_free;
	}

	rtc->base = ioremap_nocache(rtc->mem->start, resource_size(rtc->mem));
	if (!rtc->base) {
		ret = -EBUSY;
		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
		goto err_release_mem_region;
	}

	spin_lock_init(&rtc->lock);

	platform_set_drvdata(pdev, rtc);

	device_init_wakeup(&pdev->dev, 1);

	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &jz4740_rtc_ops,
					THIS_MODULE);
	if (IS_ERR(rtc->rtc)) {
		ret = PTR_ERR(rtc->rtc);
		dev_err(&pdev->dev, "Failed to register rtc device: %d\n", ret);
		goto err_iounmap;
	}

	ret = request_irq(rtc->irq, jz4740_rtc_irq, 0,
				pdev->name, rtc);
	if (ret) {
		dev_err(&pdev->dev, "Failed to request rtc irq: %d\n", ret);
		goto err_unregister_rtc;
	}

	scratchpad = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SCRATCHPAD);
	if (scratchpad != 0x12345678) {
		ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SCRATCHPAD, 0x12345678);
		ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, 0);
		if (ret) {
			dev_err(&pdev->dev, "Could not write write to RTC registers\n");
			goto err_free_irq;
		}
	}

	return 0;

err_free_irq:
	free_irq(rtc->irq, rtc);
err_unregister_rtc:
	rtc_device_unregister(rtc->rtc);
err_iounmap:
	platform_set_drvdata(pdev, NULL);
	iounmap(rtc->base);
err_release_mem_region:
	release_mem_region(rtc->mem->start, resource_size(rtc->mem));
err_free:
	kfree(rtc);

	return ret;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:86，代码来源:rtc-jz4740.c

示例13: mc13xxx_rtc_probe

static int __init mc13xxx_rtc_probe(struct platform_device *pdev)
{
	int ret;
	struct mc13xxx_rtc *priv;
	struct mc13xxx *mc13xxx;
	int rtcrst_pending;

	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	mc13xxx = dev_get_drvdata(pdev->dev.parent);
	priv->mc13xxx = mc13xxx;

	platform_set_drvdata(pdev, priv);

	mc13xxx_lock(mc13xxx);

	ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_RTCRST,
			mc13xxx_rtc_reset_handler, DRIVER_NAME, priv);
	if (ret)
		goto err_reset_irq_request;

	ret = mc13xxx_irq_status(mc13xxx, MC13XXX_IRQ_RTCRST,
			NULL, &rtcrst_pending);
	if (ret)
		goto err_reset_irq_status;

	priv->valid = !rtcrst_pending;

	ret = mc13xxx_irq_request_nounmask(mc13xxx, MC13XXX_IRQ_1HZ,
			mc13xxx_rtc_update_handler, DRIVER_NAME, priv);
	if (ret)
		goto err_update_irq_request;

	ret = mc13xxx_irq_request_nounmask(mc13xxx, MC13XXX_IRQ_TODA,
			mc13xxx_rtc_alarm_handler, DRIVER_NAME, priv);
	if (ret)
		goto err_alarm_irq_request;

	mc13xxx_unlock(mc13xxx);

	priv->rtc = rtc_device_register(pdev->name,
			&pdev->dev, &mc13xxx_rtc_ops, THIS_MODULE);
	if (IS_ERR(priv->rtc)) {
		ret = PTR_ERR(priv->rtc);

		mc13xxx_lock(mc13xxx);

		mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_TODA, priv);
err_alarm_irq_request:

		mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_1HZ, priv);
err_update_irq_request:

err_reset_irq_status:

		mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_RTCRST, priv);
err_reset_irq_request:

		mc13xxx_unlock(mc13xxx);

		platform_set_drvdata(pdev, NULL);
		kfree(priv);
	}

	return ret;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:68，代码来源:rtc-mc13xxx.c

示例14: tps6591x_rtc_probe

static int tps6591x_rtc_probe(struct platform_device *pdev)
{
	struct tps6591x_rtc_platform_data *pdata = pdev->dev.platform_data;
	struct tps6591x_rtc *rtc;
	struct rtc_time tm;
	int err;
	u8 reg;

	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);

	if (!rtc)
		return -ENOMEM;

	rtc->irq = -1;

	if (!pdata) {
		dev_err(&pdev->dev, "no platform_data specified\n");
		return -EINVAL;
	}

	if (pdata->irq < 0)
		dev_err(&pdev->dev, "\n no IRQ specified, wakeup is disabled\n");

	dev_set_drvdata(&pdev->dev, rtc);
	device_init_wakeup(&pdev->dev, 1);
	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
				       &tps6591x_rtc_ops, THIS_MODULE);

	if (IS_ERR(rtc->rtc)) {
		err = PTR_ERR(rtc->rtc);
		goto fail;
	}

	if ((int)pdev && (int)&pdev->dev)
		err = tps6591x_read_regs(&pdev->dev, RTC_STATUS, 1, &reg);
	else {
		dev_err(&pdev->dev, "\n %s Input params incorrect\n", __func__);
		return -EBUSY;
	}
	if (err) {
		dev_err(&pdev->dev, "\n %s unable to read status\n", __func__);
		return -EBUSY;
	}

	reg = RTC_BBCH_SEL | RTC_BBCH_EN;
	tps6591x_write_regs(&pdev->dev, RTC_BBCH_REG, 1, &reg);
	if (err) {
		dev_err(&pdev->dev, "unable to program Charger reg\n");
		return -EBUSY;
	}

	err = tps6591x_rtc_start(&pdev->dev);
	if (err) {
		dev_err(&pdev->dev, "unable to start RTC\n");
		return -EBUSY;
	}

	tps6591x_rtc_read_time(&pdev->dev, &tm);

	if (tps6591x_rtc_valid_tm(&tm) < 0) {
		if (pdata->time.tm_year < 2000 || pdata->time.tm_year >= 2100) {
			memset(&pdata->time, 0, sizeof(pdata->time));
			pdata->time.tm_year = 2000;
			pdata->time.tm_mday = 1;
		}
		pdata->time.tm_year -= OS_REF_YEAR;
		tps6591x_rtc_set_time(&pdev->dev, &pdata->time);
	}

	reg = ALARM_INT_STATUS;
	err = tps6591x_write_regs(&pdev->dev, RTC_STATUS, 1, &reg);
	if (err) {
		dev_err(&pdev->dev, "unable to program RTC_STATUS reg\n");
		return -EBUSY;
	}

	reg = ENABLE_ALARM_INT;
	tps6591x_write_regs(&pdev->dev, RTC_INT, 1, &reg);
	if (err) {
		dev_err(&pdev->dev, "unable to program Interrupt Mask reg\n");
		return -EBUSY;
	}

	if (pdata && (pdata->irq >= 0)) {
		rtc->irq = pdata->irq;
		err = request_threaded_irq(pdata->irq, NULL, tps6591x_rtc_irq,
					IRQF_ONESHOT, "rtc_tps6591x",
					&pdev->dev);
		if (err) {
			dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
			rtc->irq = -1;
		} else {
			device_init_wakeup(&pdev->dev, 1);
			enable_irq_wake(rtc->irq);
		}
	}
	return 0;

fail:
	if (!IS_ERR_OR_NULL(rtc->rtc))
//.........这里部分代码省略.........

开发者ID:FrozenCow，项目名称:FIRE-ICE，代码行数:101，代码来源:rtc-tps6591x.c

示例15: m48t59_rtc_probe

static int __devinit m48t59_rtc_probe(struct platform_device *pdev)
{
	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
	struct m48t59_private *m48t59 = NULL;
	struct resource *res;
	int ret = -ENOMEM;
	char *name;
	const struct rtc_class_ops *ops;

	/* This chip could be memory-mapped or I/O-mapped */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
		if (!res)
			return -EINVAL;
	}

	if (res->flags & IORESOURCE_IO) {
		/* If we are I/O-mapped, the platform should provide
		 * the operations accessing chip registers.
		 */
		if (!pdata || !pdata->write_byte || !pdata->read_byte)
			return -EINVAL;
	} else if (res->flags & IORESOURCE_MEM) {
		/* we are memory-mapped */
		if (!pdata) {
			pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
			if (!pdata)
				return -ENOMEM;
			/* Ensure we only kmalloc platform data once */
			pdev->dev.platform_data = pdata;
		}
		if (!pdata->type)
			pdata->type = M48T59RTC_TYPE_M48T59;

		/* Try to use the generic memory read/write ops */
		if (!pdata->write_byte)
			pdata->write_byte = m48t59_mem_writeb;
		if (!pdata->read_byte)
			pdata->read_byte = m48t59_mem_readb;
	}

	m48t59 = kzalloc(sizeof(*m48t59), GFP_KERNEL);
	if (!m48t59)
		return -ENOMEM;

	m48t59->ioaddr = pdata->ioaddr;

	if (!m48t59->ioaddr) {
		/* ioaddr not mapped externally */
		m48t59->ioaddr = ioremap(res->start, res->end - res->start + 1);
		if (!m48t59->ioaddr)
			goto out;
	}

	/* Try to get irq number. We also can work in
	 * the mode without IRQ.
	 */
	m48t59->irq = platform_get_irq(pdev, 0);
	if (m48t59->irq <= 0)
		m48t59->irq = NO_IRQ;

	if (m48t59->irq != NO_IRQ) {
		ret = request_irq(m48t59->irq, m48t59_rtc_interrupt,
			IRQF_SHARED, "rtc-m48t59", &pdev->dev);
		if (ret)
			goto out;
	}
	switch (pdata->type) {
	case M48T59RTC_TYPE_M48T59:
		name = "m48t59";
		ops = &m48t59_rtc_ops;
		pdata->offset = 0x1ff0;
		break;
	case M48T59RTC_TYPE_M48T02:
		name = "m48t02";
		ops = &m48t02_rtc_ops;
		pdata->offset = 0x7f0;
		break;
	case M48T59RTC_TYPE_M48T08:
		name = "m48t08";
		ops = &m48t02_rtc_ops;
		pdata->offset = 0x1ff0;
		break;
	default:
		dev_err(&pdev->dev, "Unknown RTC type\n");
		ret = -ENODEV;
		goto out;
	}

	m48t59->rtc = rtc_device_register(name, &pdev->dev, ops, THIS_MODULE);
	if (IS_ERR(m48t59->rtc)) {
		ret = PTR_ERR(m48t59->rtc);
		goto out;
	}

	m48t59_nvram_attr.size = pdata->offset;

	ret = sysfs_create_bin_file(&pdev->dev.kobj, &m48t59_nvram_attr);
	if (ret)
//.........这里部分代码省略.........

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:101，代码来源:rtc-m48t59.c

示例16: dryice_rtc_probe

/*
 * probe for dryice rtc device
 */
static int dryice_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	struct resource *res;
	struct rtc_drv_data *pdata = NULL;
	void __iomem *ioaddr = NULL;
	int rc = 0;

	dev_dbg(&pdev->dev, "%s\n", __func__);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;

	pdata->pdev = pdev;
	pdata->irq = -1;
	pdata->size = res->end - res->start + 1;

	if (!request_mem_region(res->start, pdata->size, pdev->name)) {
		rc = -EBUSY;
		goto err;
	}
	pdata->baseaddr = res->start;
	ioaddr = ioremap(pdata->baseaddr, pdata->size);
	if (!ioaddr) {
		rc = -ENOMEM;
		goto err;
	}
	pdata->ioaddr = ioaddr;
	pdata->irq = platform_get_irq(pdev, 0);

	init_waitqueue_head(&pdata->write_wait);

	INIT_WORK(&pdata->work, dryice_work);

	mutex_init(&pdata->write_mutex);

	pdata->clk = clk_get(NULL, "dryice_clk");
	clk_enable(pdata->clk);

	if (pdata->irq >= 0) {
		if (request_irq(pdata->irq, dryice_norm_irq, IRQF_SHARED,
				pdev->name, pdata) < 0) {
			dev_warn(&pdev->dev, "interrupt not available.\n");
			pdata->irq = -1;
			goto err;
		}
	}

	/*
	 * Initialize dryice hardware
	 */

	/* put dryice into valid state */
	if (di_read(pdata, DSR) & DSR_NVF)
		di_write_wait_err(pdata, DSR_NVF | DSR_SVF, DSR, rc, err);

	/* mask alarm interrupt */
	di_int_disable(pdata, DIER_CAIE);

	/* initialize alarm */
	di_write_wait_err(pdata, DCAMR_UNSET, DCAMR, rc, err);
	di_write_wait_err(pdata, 0, DCALR, rc, err);

	/* clear alarm flag */
	if (di_read(pdata, DSR) & DSR_CAF)
		di_write_wait_err(pdata, DSR_CAF, DSR, rc, err);

	/* the timer won't count if it has never been written to */
	if (!di_read(pdata, DTCMR))
		di_write_wait_err(pdata, 0, DTCMR, rc, err);

	/* start keeping time */
	if (!(di_read(pdata, DCR) & DCR_TCE))
		di_write_wait_err(pdata, di_read(pdata, DCR) | DCR_TCE, DCR,
				  rc, err);

	rtc = rtc_device_register(pdev->name, &pdev->dev,
				  &dryice_rtc_ops, THIS_MODULE);
	if (IS_ERR(rtc)) {
		rc = PTR_ERR(rtc);
		goto err;
	}
	pdata->rtc = rtc;
	platform_set_drvdata(pdev, pdata);

	return 0;
err:
	if (pdata->rtc)
		rtc_device_unregister(pdata->rtc);

	if (pdata->irq >= 0)
		free_irq(pdata->irq, pdata);
//.........这里部分代码省略.........

开发者ID:despierto，项目名称:imx_233_linux，代码行数:101，代码来源:rtc-imxdi.c

示例17: s35390a_probe

static int s35390a_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
{
	int err;
	unsigned int i;
	struct s35390a *s35390a;
	struct rtc_time tm;
	char buf[1];

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
		err = -ENODEV;
		goto exit;
	}

	s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL);
	if (!s35390a) {
		err = -ENOMEM;
		goto exit;
	}

	s35390a->client[0] = client;
	i2c_set_clientdata(client, s35390a);

	/* This chip uses multiple addresses, use dummy devices for them */
	for (i = 1; i < 8; ++i) {
		s35390a->client[i] = i2c_new_dummy(client->adapter,
					client->addr + i);
		if (!s35390a->client[i]) {
			dev_err(&client->dev, "Address %02x unavailable\n",
						client->addr + i);
			err = -EBUSY;
			goto exit_dummy;
		}
	}

	err = s35390a_reset(s35390a);
	if (err < 0) {
		dev_err(&client->dev, "error resetting chip\n");
		goto exit_dummy;
	}

	err = s35390a_disable_test_mode(s35390a);
	if (err < 0) {
		dev_err(&client->dev, "error disabling test mode\n");
		goto exit_dummy;
	}

	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
	if (err < 0) {
		dev_err(&client->dev, "error checking 12/24 hour mode\n");
		goto exit_dummy;
	}
	if (buf[0] & S35390A_FLAG_24H)
		s35390a->twentyfourhour = 1;
	else
		s35390a->twentyfourhour = 0;

	if (s35390a_get_datetime(client, &tm) < 0)
		dev_warn(&client->dev, "clock needs to be set\n");

	INIT_WORK(&s35390a->work, s35390a_work);

	if (client->irq > 0) {
		err = request_irq(client->irq, s35390a_irq, IRQF_TRIGGER_LOW,
				client->name, client);
		if (err) {
			dev_err(&client->dev, "unable to request IRQ\n");
			goto exit_dummy;
		}
	}

	s35390a->rtc = rtc_device_register(s35390a_driver.driver.name,
				&client->dev, &s35390a_rtc_ops, THIS_MODULE);

	if (IS_ERR(s35390a->rtc)) {
		err = PTR_ERR(s35390a->rtc);
		goto exit_intr;
	}
	s35390a->rtc->irq_freq = 0;
	s35390a->rtc->max_user_freq = 16;
	return 0;

exit_intr:
	free_irq(client->irq, client);

exit_dummy:
	for (i = 1; i < 8; ++i)
		if (s35390a->client[i])
			i2c_unregister_device(s35390a->client[i]);
	kfree(s35390a);
	i2c_set_clientdata(client, NULL);

exit:
	return err;
}

开发者ID:Aircell，项目名称:asp-kernel，代码行数:95，代码来源:rtc-s35390a.c

示例18: rtc_probe

static int rtc_probe(struct platform_device *pdev)
{
	struct v3020_platform_data *pdata = pdev->dev.platform_data;
	struct v3020 *chip;
	int retval = -EBUSY;
	int i;
	int temp;

	chip = kzalloc(sizeof *chip, GFP_KERNEL);
	if (!chip)
		return -ENOMEM;

	if (pdata->use_gpio)
		chip->ops = &v3020_gpio_ops;
	else
		chip->ops = &v3020_mmio_ops;

	retval = chip->ops->map_io(chip, pdev, pdata);
	if (retval)
		goto err_chip;

	/* Make sure the v3020 expects a communication cycle
	 * by reading 8 times */
	for (i = 0; i < 8; i++)
		temp = chip->ops->read_bit(chip);

	/* Test chip by doing a write/read sequence
	 * to the chip ram */
	v3020_set_reg(chip, V3020_SECONDS, 0x33);
	if (v3020_get_reg(chip, V3020_SECONDS) != 0x33) {
		retval = -ENODEV;
		goto err_io;
	}

	/* Make sure frequency measurement mode, test modes, and lock
	 * are all disabled */
	v3020_set_reg(chip, V3020_STATUS_0, 0x0);

	if (pdata->use_gpio)
		dev_info(&pdev->dev, "Chip available at GPIOs "
			 "%d, %d, %d, %d\n",
			 chip->gpio[V3020_CS].gpio, chip->gpio[V3020_WR].gpio,
			 chip->gpio[V3020_RD].gpio, chip->gpio[V3020_IO].gpio);
	else
		dev_info(&pdev->dev, "Chip available at "
			 "physical address 0x%llx,"
			 "data connected to D%d\n",
			 (unsigned long long)pdev->resource[0].start,
			 chip->leftshi

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtc_get_time函数代码示例发布时间：2022-05-30

C++ rtc1_counter_get函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17957|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rtc_device_register函数代码示例

示例1: twl_rtc_probe

示例2: AMI8563_probe

示例3: tps65910_rtc_probe

示例4: s2mps11_rtc_probe

示例5: rs5c348_probe

示例6: vrtc_mrst_do_probe

示例7: twl4030_rtc_probe

示例8: s3c_rtc_probe

示例9: s3c_rtc_probe

示例10: stk17ta8_rtc_probe

示例11: ds1511_rtc_probe

示例12: jz4740_rtc_probe

示例13: mc13xxx_rtc_probe

示例14: tps6591x_rtc_probe

示例15: m48t59_rtc_probe

示例16: dryice_rtc_probe

示例17: s35390a_probe

示例18: rtc_probe

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053