C++ rtems_semaphore_release函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtems_semaphore_release函数的典型用法代码示例。如果您正苦于以下问题：C++ rtems_semaphore_release函数的具体用法？C++ rtems_semaphore_release怎么用？C++ rtems_semaphore_release使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtems_semaphore_release函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: msdos_file_ftruncate

/* msdos_file_ftruncate --
 *     Truncate the file (if new length is greater then current do nothing).
 *
 * PARAMETERS:
 *     iop    - file control block
 *     length - new length
 *
 * RETURNS:
 *     RC_OK on success, or -1 if error occured (errno set appropriately).
 */
int
msdos_file_ftruncate(rtems_libio_t *iop, rtems_off64_t length)
{
    int                rc = RC_OK;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    msdos_fs_info_t   *fs_info = iop->pathinfo.mt_entry->fs_info;
    fat_file_fd_t     *fat_fd = iop->pathinfo.node_access;

    if (length >= fat_fd->fat_file_size)
        return RC_OK;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    rc = fat_file_truncate(iop->pathinfo.mt_entry, fat_fd, length);
    if (rc != RC_OK)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return rc;
    }

    /*
     * fat_file_truncate do nothing if new length >= fat-file size, so update
     * file size only if length < fat-file size
     */
    if (length < fat_fd->fat_file_size)
        iop->size = fat_fd->fat_file_size = length;

    rtems_semaphore_release(fs_info->vol_sema);
    return RC_OK;
}

开发者ID:rtemss，项目名称:rtems，代码行数:43，代码来源:msdos_file.c

示例2: msdos_file_lseek

/* msdos_file_lseek --
 *     Process lseek call to the file: extend file if lseek is up to the end
 *     of the file.
 *
 * PARAMETERS:
 *     iop    - file control block
 *     offset - new offset
 *     whence - predefine directive
 *
 * RETURNS:
 *     new offset on success, or -1 if error occured (errno set
 *     appropriately).
 */
rtems_off64_t
msdos_file_lseek(rtems_libio_t *iop, rtems_off64_t offset, int whence)
{
    int                rc = RC_OK;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    msdos_fs_info_t   *fs_info = iop->pathinfo.mt_entry->fs_info;
    fat_file_fd_t     *fat_fd = iop->pathinfo.node_access;
    uint32_t           real_size = 0;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    rc = fat_file_extend(iop->pathinfo.mt_entry, fat_fd, iop->offset,
                         &real_size);
    if (rc != RC_OK)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return rc;
    }

    if (real_size > fat_fd->fat_file_size)
        fat_fd->fat_file_size = iop->offset = real_size;

    iop->size = fat_fd->fat_file_size;

    rtems_semaphore_release(fs_info->vol_sema);
    return iop->offset;
}

开发者ID:rtemss，项目名称:rtems，代码行数:43，代码来源:msdos_file.c

示例3: task

/*
 * Task that calls the function we want to trace
 */
static void task(rtems_task_argument arg)
{
  rtems_status_code sc;
  uint32_t i;

  for ( i = 0; i < ITERATIONS; i++ ) {
    /*
     * Wait until the previous task in the task chain
     * has completed its operation.
     */
    sc = rtems_semaphore_obtain(task_data[arg].prev_sem, 0, 0);
    rtems_test_assert(sc == RTEMS_SUCCESSFUL);

    add_number_wrapper(arg, i);

    /*
     * Signal the next task in the chain to continue
     */
    sc = rtems_semaphore_release(task_data[arg].task_sem);
    rtems_test_assert(sc == RTEMS_SUCCESSFUL);
  }

  /* Signal the main task that this task has finished */
  sc = rtems_semaphore_release(finished_sem);
  rtems_test_assert(sc == RTEMS_SUCCESSFUL);
  rtems_task_suspend(rtems_task_self());
}

开发者ID:WattTech，项目名称:rtems，代码行数:30，代码来源:init.c

示例4: release_semaphore

static void release_semaphore(rtems_id timer, void *arg)
{
  /* The arg is NULL */
  test_context *ctx = &ctx_instance;
  rtems_status_code sc;

  if (
    _Thread_Wait_flags_get(ctx->main_task_control)
      == (THREAD_WAIT_CLASS_OBJECT | THREAD_WAIT_STATE_INTEND_TO_BLOCK)
  ) {
    CORE_semaphore_Control *sem;

    ctx->done = true;

    sc = rtems_semaphore_release(ctx->semaphore_id);
    rtems_test_assert(sc == RTEMS_SUCCESSFUL);

    rtems_test_assert(
      _Thread_Wait_flags_get(ctx->main_task_control)
        == (THREAD_WAIT_CLASS_OBJECT | THREAD_WAIT_STATE_READY_AGAIN)
    );
    sem = &ctx->semaphore_control->Core_control.Semaphore;
    rtems_test_assert(sem->count == 0);
  } else {
    sc = rtems_semaphore_release(ctx->semaphore_id);
    rtems_test_assert(sc == RTEMS_SUCCESSFUL);
  }
}

开发者ID:greenmeent，项目名称:rtems，代码行数:28，代码来源:init.c

示例5: msdos_file_open

/* msdos_file_open --
 *     Open fat-file which correspondes to the file
 *
 * PARAMETERS:
 *     iop        - file control block
 *     pathname   - name
 *     flag       - flags
 *     mode       - mode
 *
 * RETURNS:
 *     RC_OK, if file opened successfully, or -1 if error occured
 *     and errno set appropriately
 */
int
msdos_file_open(rtems_libio_t *iop, const char *pathname, uint32_t   flag,
                uint32_t   mode)
{
    int                rc = RC_OK;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    msdos_fs_info_t   *fs_info = iop->pathinfo.mt_entry->fs_info;
    fat_file_fd_t     *fat_fd = iop->pathinfo.node_access;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    rc = fat_file_reopen(fat_fd);
    if (rc != RC_OK)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return rc;
    }

    if (iop->flags & LIBIO_FLAGS_APPEND)
        iop->offset = fat_fd->fat_file_size;

    iop->size = fat_fd->fat_file_size;

    rtems_semaphore_release(fs_info->vol_sema);
    return RC_OK;
}

开发者ID:rtemss，项目名称:rtems，代码行数:42，代码来源:msdos_file.c

示例6: OS_FileOpenCheck

/* --------------------------------------------------------------------------------------
   Name: OS_FileOpenCheck
    
   Purpose: Checks to see if a file is open 
    
   Returns: OS_FS_ERROR if the file is not open 
            OS_FS_SUCCESS if the file is open 
 ---------------------------------------------------------------------------------------*/
int32 OS_FileOpenCheck(char *Filename)
{
    rtems_status_code rtems_sc;
    uint32            i;

    if (Filename == NULL)
    {
        return(OS_FS_ERR_INVALID_POINTER);
    }

    rtems_sc = rtems_semaphore_obtain (OS_FDTableSem, RTEMS_WAIT, RTEMS_NO_TIMEOUT);

    for ( i = 0; i < OS_MAX_NUM_OPEN_FILES; i++)
    {
        if ((OS_FDTable[i].IsValid == TRUE) &&  (strcmp(OS_FDTable[i].Path, Filename) == 0))
        {
           rtems_sc = rtems_semaphore_release (OS_FDTableSem);
           return(OS_FS_SUCCESS);
        }
    }/* end for */

    rtems_sc = rtems_semaphore_release (OS_FDTableSem);
    return OS_FS_ERROR;

}/* end OS_FileOpenCheck */

开发者ID:felipeprov，项目名称:osal，代码行数:33，代码来源:osfileapi.c

示例7: rtems_termios_device_open

rtems_status_code
rtems_termios_device_open(
  rtems_device_major_number  major,
  rtems_device_minor_number  minor,
  void                      *arg
)
{
  rtems_status_code          sc;
  rtems_termios_device_node *device_node;
  struct rtems_termios_tty  *tty;

  sc = rtems_semaphore_obtain(
    rtems_termios_ttyMutex, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
  if (sc != RTEMS_SUCCESSFUL)
    return sc;

  device_node = rtems_termios_find_device_node (major, minor);
  if (device_node == NULL) {
    rtems_semaphore_release (rtems_termios_ttyMutex);
    return RTEMS_INVALID_ID;
  }

  tty = rtems_termios_open_tty(
    major, minor, arg, device_node->tty, device_node, NULL);
  if (tty == NULL) {
    rtems_semaphore_release (rtems_termios_ttyMutex);
    return RTEMS_NO_MEMORY;
  }

  rtems_semaphore_release (rtems_termios_ttyMutex);

  return RTEMS_SUCCESSFUL;
}

开发者ID:jingfenglanyun，项目名称:rtems，代码行数:33，代码来源:termios.c

示例8: rtems_termios_write

rtems_status_code
rtems_termios_write (void *arg)
{
	rtems_libio_rw_args_t *args = arg;
	struct rtems_termios_tty *tty = args->iop->data1;
	rtems_status_code sc;

	sc = rtems_semaphore_obtain (tty->osem, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
	if (sc != RTEMS_SUCCESSFUL)
		return sc;
	if (rtems_termios_linesw[tty->t_line].l_write != NULL) {
		sc = rtems_termios_linesw[tty->t_line].l_write(tty,args);
		rtems_semaphore_release (tty->osem);
		return sc;
	}
	if (tty->termios.c_oflag & OPOST) {
		uint32_t   count = args->count;
		char      *buffer = args->buffer;
		while (count--)
			oproc (*buffer++, tty);
		args->bytes_moved = args->count;
	}
	else {
		rtems_termios_puts (args->buffer, args->count, tty);
		args->bytes_moved = args->count;
	}
	rtems_semaphore_release (tty->osem);
	return sc;
}

开发者ID:epicsdeb，项目名称:rtems，代码行数:29，代码来源:termios.c

示例9: msdos_file_sync

/* msdos_file_sync --
 *     Synchronize file - synchronize file data and if file is not removed
 *     synchronize file metadata.
 *
 * PARAMETERS:
 *     iop - file control block
 *
 * RETURNS:
 *     RC_OK on success, or -1 if error occured (errno set appropriately)
 */
int
msdos_file_sync(rtems_libio_t *iop)
{
    int                rc = RC_OK;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    msdos_fs_info_t   *fs_info = iop->pathinfo.mt_entry->fs_info;
    fat_file_fd_t     *fat_fd = iop->pathinfo.node_access;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    rc = fat_file_update(&fs_info->fat, fat_fd);
    if (rc != RC_OK)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return rc;
    }

    rc = fat_sync(&fs_info->fat);

    rtems_semaphore_release(fs_info->vol_sema);
    if ( rc != 0 )
      rtems_set_errno_and_return_minus_one(EIO);

    return RC_OK;
}

开发者ID:AoLaD，项目名称:rtems，代码行数:38，代码来源:msdos_file.c

示例10: Task01

/* Task01 starts with priority 36 */
rtems_task Task01(rtems_task_argument ignored)
{
  rtems_status_code status;
  printf("TA01: started with priority %d\n", getprio());

  status = rtems_semaphore_obtain( sem_id[0], RTEMS_WAIT, 0 );
  directive_failed( status, "rtems_semaphore_obtain of S0\n");
  printf("TA01: priority %d, holding S0\n", getprio());

  status = rtems_semaphore_obtain( sem_id[1], RTEMS_WAIT, 0 );
  directive_failed( status, "rtems_semaphore_obtain of S1");
  printf("TA01: priority %d, holding S0, S1\n", getprio());

  /* Start Task 2 (TA02) with priority 34. It will run immediately. */
  status = rtems_task_start( Task_id[1], Task02, 0);
  directive_failed( status, "rtems_task_start of TA02\n");

  /* Start Task 3 (TA03) with priority 32. It will run immediately. */
  status = rtems_task_start( Task_id[2], Task03, 0);
  directive_failed( status, "rtems_task_start of TA03\n");
  printf("TA01: priority %d, holding S0, S1\n", getprio());

  status = rtems_semaphore_release(sem_id[1]);
  directive_failed( status, "rtems_semaphore_release of S1\n");
  printf("TA01: priority %d, holding S0\n", getprio());

  status = rtems_semaphore_release(sem_id[0]);
  directive_failed( status, "rtems_semaphore_release of S0\n");
  printf("TA01: priority %d\n", getprio());

  printf("TA01: exiting\n");
  TEST_END();

  rtems_test_exit(0);
}

开发者ID:gedare，项目名称:rtems，代码行数:36，代码来源:init.c

示例11: Task01

/* Task01 starts with priority 36 */
rtems_task Task01(rtems_task_argument ignored)
{
  rtems_status_code status;
  printf("TA01: started with priority %d\n", getprio());

  status = rtems_semaphore_obtain( sem_id[0], RTEMS_WAIT, 0 );
  directive_failed( status, "rtems_semaphore_obtain of S0\n");
  printf("TA01: priority %d, holding S0\n", getprio());

  status = rtems_semaphore_obtain( sem_id[1], RTEMS_WAIT, 0 );
  directive_failed( status, "rtems_semaphore_obtain of S1");
  printf("TA01: priority %d, holding S0, S1\n", getprio());

  /* Start Task 2 (TA02) with priority 34. It will run immediately. */
  status = rtems_task_start( Task_id[1], Task02, 0);
  directive_failed( status, "rtems_task_start of TA02\n");

  status = rtems_semaphore_release(sem_id[1]);
  directive_failed( status, "rtems_semaphore_release of S1\n");
  printf("TA01: priority %d, holding S0\n", getprio());

  status = rtems_semaphore_release(sem_id[0]);
  directive_failed( status, "rtems_semaphore_release of S0\n");
  printf("TA01: priority %d\n", getprio());

  printf("TA01: exiting\n");
  printf("*** END OF SEM01 ***\n");
  status = rtems_task_delete( RTEMS_SELF);
  directive_failed( status, "rtems_task_delete TA01");
}

开发者ID:chch1028，项目名称:rtems，代码行数:31，代码来源:init.c

示例12: msdos_file_rmnod

/* msdos_file_rmnod --
 *     Remove node associated with a file - set up first name character to
 *     predefined value(and write it to the disk), and mark fat-file which
 *     correspondes to the file as "removed"
 *
 * PARAMETERS:
 *     pathloc - node description
 *
 * RETURNS:
 *     RC_OK on success, or -1 if error occured (errno set appropriately)
 */
int
msdos_file_rmnod(rtems_filesystem_location_info_t *parent_pathloc,
                 rtems_filesystem_location_info_t *pathloc)
{
    int                rc = RC_OK;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    msdos_fs_info_t   *fs_info = pathloc->mt_entry->fs_info;
    fat_file_fd_t     *fat_fd = pathloc->node_access;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    /* mark file removed */
    rc = msdos_set_first_char4file_name(pathloc->mt_entry,
                                        &fat_fd->dir_pos,
                                        MSDOS_THIS_DIR_ENTRY_EMPTY);
    if (rc != RC_OK)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return rc;
    }

    fat_file_mark_removed(pathloc->mt_entry, fat_fd);

    rtems_semaphore_release(fs_info->vol_sema);
    return RC_OK;
}

开发者ID:rtemss，项目名称:rtems，代码行数:40，代码来源:msdos_file.c

示例13: msdos_file_write

/* msdos_file_write --
 *     This routine writes the specified data buffer into the file pointed to
 *     by file control block.
 *
 * PARAMETERS:
 *     iop    - file control block
 *     buffer - data to write
 *     count  - count of bytes to write
 *
 * RETURNS:
 *     the number of bytes written on success, or -1 if error occured
 *     and errno set appropriately
 */
ssize_t
msdos_file_write(rtems_libio_t *iop,const void *buffer, size_t count)
{
    ssize_t            ret = 0;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    msdos_fs_info_t   *fs_info = iop->pathinfo.mt_entry->fs_info;
    fat_file_fd_t     *fat_fd = iop->pathinfo.node_access;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    ret = fat_file_write(iop->pathinfo.mt_entry, fat_fd, iop->offset, count,
                         buffer);
    if (ret < 0)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return -1;
    }

    /*
     * update file size in both fat-file descriptor and file control block if
     * file was extended
     */
    if (iop->offset + ret > fat_fd->fat_file_size)
        fat_fd->fat_file_size = iop->offset + ret;

    iop->size = fat_fd->fat_file_size;

    rtems_semaphore_release(fs_info->vol_sema);
    return ret;
}

开发者ID:rtemss，项目名称:rtems，代码行数:46，代码来源:msdos_file.c

示例14: task_pool_release

/*PAGE
 *
 * task_pool_release
 *
 * Return task obtained by 'obtain()' back to the task pool.
 *
 * Input parameters:
 *   info  - pointer to corresponding SessionInfo structure.
 *
 * Output parameters:
 *   NONE
 *
 */
static void
task_pool_release(FTPD_SessionInfo_t* info)
{
  rtems_semaphore_obtain(task_pool.mutex, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
  task_pool.queue[task_pool.tail] = info;
  if(++task_pool.tail >= task_pool.count)
    task_pool.tail = 0;
  rtems_semaphore_release(task_pool.mutex);
  rtems_semaphore_release(task_pool.sem);
}

开发者ID:epicsdeb，项目名称:rtems，代码行数:23，代码来源:ftpd.c

示例15: rtems_termios_device_install

rtems_status_code rtems_termios_device_install(
  const char                         *device_file,
  rtems_device_major_number           major,
  rtems_device_minor_number           minor,
  const rtems_termios_device_handler *handler,
  void                               *context
)
{
  rtems_status_code          sc;
  rtems_termios_device_node *new_device_node;
  rtems_termios_device_node *existing_device_node;

  new_device_node = malloc(sizeof(*new_device_node));
  if (new_device_node == NULL) {
    return RTEMS_NO_MEMORY;
  }

  new_device_node->major = major;
  new_device_node->minor = minor;
  new_device_node->handler = handler;
  new_device_node->context = context;
  new_device_node->tty = NULL;

  sc = rtems_semaphore_obtain(
    rtems_termios_ttyMutex, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
  if (sc != RTEMS_SUCCESSFUL) {
    free(new_device_node);
    return RTEMS_INCORRECT_STATE;
  }

  existing_device_node = rtems_termios_find_device_node (major, minor);
  if (existing_device_node != NULL) {
    free(new_device_node);
    rtems_semaphore_release (rtems_termios_ttyMutex);
    return RTEMS_RESOURCE_IN_USE;
  }

  if (device_file != NULL) {
    sc = rtems_io_register_name (device_file, major, minor);
    if (sc != RTEMS_SUCCESSFUL) {
      free(new_device_node);
      rtems_semaphore_release (rtems_termios_ttyMutex);
      return RTEMS_UNSATISFIED;
    }
  }

  rtems_chain_append_unprotected(
    &rtems_termios_devices, &new_device_node->node);

  rtems_semaphore_release (rtems_termios_ttyMutex);

  return RTEMS_SUCCESSFUL;
}

开发者ID:jingfenglanyun，项目名称:rtems，代码行数:53，代码来源:termios.c

示例16: grtm_open

static rtems_device_driver grtm_open(
	rtems_device_major_number major, 
	rtems_device_minor_number minor, 
	void *arg)
{
	struct grtm_priv *pDev;
	struct drvmgr_dev *dev;

	FUNCDBG();

	if ( drvmgr_get_dev(&grtm_rmap_drv_info.general, minor, &dev) ) {
		DBG("Wrong minor %d\n", minor);
		return RTEMS_INVALID_NUMBER;
	}
	pDev = (struct grtm_priv *)dev->priv;
	
	/* Wait until we get semaphore */
	if ( rtems_semaphore_obtain(grtm_dev_sem, RTEMS_WAIT, RTEMS_NO_TIMEOUT) != RTEMS_SUCCESSFUL ){
		return RTEMS_INTERNAL_ERROR;
	}

	/* Is device in use? */
	if ( pDev->open ){
		rtems_semaphore_release(grtm_dev_sem);
		return RTEMS_RESOURCE_IN_USE;
	}
	
	/* Mark device taken */
	pDev->open = 1;
	
	rtems_semaphore_release(grtm_dev_sem);
	
	DBG("grtm_open: OPENED minor %d (pDev: 0x%x)\n",pDev->minor,(unsigned int)pDev);
	
	/* Set defaults */
	pDev->config.timeout = RTEMS_NO_TIMEOUT;	/* no timeout (wait forever) */
	pDev->config.blocking = 0;			/* polling mode */
	
	pDev->running = 0;				/* not in running mode yet */

	memset(&pDev->config,0,sizeof(pDev->config));
	
	/* The core has been reset when we execute here, so it is possible
	 * to read out what HW is implemented from core.
	 */
	grtm_hw_get_implementation(pDev, &pDev->hw_avail);

	/* Get default modes */
	grtm_hw_get_default_modes(&pDev->config,&pDev->hw_avail);
	
	return RTEMS_SUCCESSFUL;
}

开发者ID:FullMentalPanic，项目名称:RTEMS_NEW_TOOL_CHAIN，代码行数:52，代码来源:grtm_rmap.c

示例17: OS_close

int32 OS_close (int32  filedes)
{
    int               status;
    rtems_status_code rtems_sc;

    /* Make sure the file descriptor is legit before using it */
    if (filedes < 0 || filedes >= OS_MAX_NUM_OPEN_FILES || OS_FDTable[filedes].IsValid == FALSE)
    {
        return OS_FS_ERR_INVALID_FD;
    }
    else
    {    
        status = close ((int) OS_FDTable[filedes].OSfd);
        if (status == ERROR)
        {
            /*
            ** First, try one more time to close the file
            ** In case it was an interrupted system call
            */
            status = close ((int) OS_FDTable[filedes].OSfd);

            /*
            ** Next, remove the file from the OSAL list
            ** to free up that slot 
            */
            /* fill in the table before returning */
            rtems_sc = rtems_semaphore_obtain (OS_FDTableSem, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
            OS_FDTable[filedes].OSfd =       -1;
            strcpy(OS_FDTable[filedes].Path, "\0");
            OS_FDTable[filedes].User =       0;
            OS_FDTable[filedes].IsValid =    FALSE;
            rtems_sc = rtems_semaphore_release (OS_FDTableSem);

            return OS_FS_ERROR;
        }
        else
        {
            /* fill in the table before returning */
            rtems_sc = rtems_semaphore_obtain (OS_FDTableSem, RTEMS_WAIT, RTEMS_NO_TIMEOUT);
            OS_FDTable[filedes].OSfd =       -1;
            strcpy(OS_FDTable[filedes].Path, "\0");
            OS_FDTable[filedes].User =       0;
            OS_FDTable[filedes].IsValid =    FALSE;
            rtems_sc = rtems_semaphore_release (OS_FDTableSem);
            
            return OS_FS_SUCCESS;
        }

    }
    
}/* end OS_close */

开发者ID:gpgreen，项目名称:osal-beagleboard，代码行数:51，代码来源:osfileapi.c

示例18: bfin_twi_isr

void bfin_twi_isr(int source) {
  void *base;
  int i;
  uint16_t r;
  uint16_t stat;

  for (i = 0; i < N_BFIN_TWI; i++) {
    base = twi[i].base;
    if (base) {
      stat = BFIN_REG16(base, TWI_INT_STAT_OFFSET);
      if (stat) {
        BFIN_REG16(base, TWI_INT_STAT_OFFSET) = stat;
        if ((stat & TWI_INT_STAT_SINIT) && !twi[i].slaveActive) {
          twi[i].slaveActive = true;
          r = BFIN_REG16(base, TWI_FIFO_CTL_OFFSET);
          BFIN_REG16(base, TWI_FIFO_CTL_OFFSET) = r | TWI_FIFO_CTL_XMTFLUSH;
          BFIN_REG16(base, TWI_FIFO_CTL_OFFSET) = r;
          r = BFIN_REG16(base, TWI_SLAVE_CTL_OFFSET);
          BFIN_REG16(base, TWI_SLAVE_CTL_OFFSET) = r | TWI_SLAVE_CTL_STDVAL;
        }
        if (twi[i].slaveActive) {


          if (stat & (TWI_INT_STAT_SCOMP | TWI_INT_STAT_SERR)) {


            r = BFIN_REG16(base, TWI_SLAVE_CTL_OFFSET);
            BFIN_REG16(base, TWI_SLAVE_CTL_OFFSET) = r & ~TWI_SLAVE_CTL_STDVAL;
            twi[i].slaveActive = false;


          }
        }
        if (twi[i].masterActive && !twi[i].slaveActive) {


          if (stat & (TWI_INT_STAT_MCOMP | TWI_INT_STAT_MERR)) {
            if (!(stat & TWI_INT_STAT_MERR)) {


              rtems_semaphore_release(twi[i].irqSem);


            } else
              rtems_semaphore_release(twi[i].irqSem);
          }
        }
      }
    }
  }
}

开发者ID:RTEMS，项目名称:rtems，代码行数:51，代码来源:twi.c

示例19: msdos_file_sync

/* msdos_file_sync --
 *     Synchronize file - synchronize file data and if file is not removed
 *     synchronize file metadata.
 *
 * PARAMETERS:
 *     iop - file control block
 *
 * RETURNS:
 *     RC_OK on success, or -1 if error occured (errno set appropriately)
 */
int
msdos_file_sync(rtems_libio_t *iop)
{
    int                rc = RC_OK;
    rtems_status_code  sc = RTEMS_SUCCESSFUL;
    fat_file_fd_t     *fat_fd = iop->pathinfo.node_access;
    msdos_fs_info_t   *fs_info = iop->pathinfo.mt_entry->fs_info;

    sc = rtems_semaphore_obtain(fs_info->vol_sema, RTEMS_WAIT,
                                MSDOS_VOLUME_SEMAPHORE_TIMEOUT);
    if (sc != RTEMS_SUCCESSFUL)
        rtems_set_errno_and_return_minus_one(EIO);

    /* synchronize file data */
    rc = fat_file_datasync(iop->pathinfo.mt_entry, fat_fd);
    if (rc != RC_OK)
    {
        rtems_semaphore_release(fs_info->vol_sema);
        return rc;
    }

    /*
     * if fat-file descriptor is not marked "removed" - synchronize file
     * metadata
     */
    if (!FAT_FILE_IS_REMOVED(fat_fd))
    {
        rc = msdos_set_first_cluster_num(iop->pathinfo.mt_entry, fat_fd);
        if (rc != RC_OK)
        {
            rtems_semaphore_release(fs_info->vol_sema);
            return rc;
        }
        rc = msdos_set_file_size(iop->pathinfo.mt_entry, fat_fd);
        if (rc != RC_OK)
        {
            rtems_semaphore_release(fs_info->vol_sema);
            return rc;
        }
        rc = msdos_set_dir_wrt_time_and_date(iop->pathinfo.mt_entry, fat_fd);
        if (rc != RC_OK)
        {
            rtems_semaphore_release(fs_info->vol_sema);
            return rc;
        }
    }

    rtems_semaphore_release(fs_info->vol_sema);
    return RC_OK;
}

开发者ID:rtemss，项目名称:rtems，代码行数:60，代码来源:msdos_file.c

示例20: OS_CloseFileByName

/* --------------------------------------------------------------------------------------
   Name: OS_CloseFileByName

   Purpose: Allows a file to be closed by name.
            This will only work if the name passed in is the same name used to open 
            the file.

   Returns: OS_FS_ERR_PATH_INVALID if the file is not found 
            OS_FS_ERROR   if the file close returned an error
            OS_FS_SUCCESS if the file close suceeded  
 ---------------------------------------------------------------------------------------*/
int32 OS_CloseFileByName(char *Filename)
{
    rtems_status_code rtems_sc;
    uint32            i;
    int               status;

    if (Filename == NULL)
    {
        return(OS_FS_ERR_INVALID_POINTER);
    }

    rtems_sc = rtems_semaphore_obtain (OS_FDTableSem, RTEMS_WAIT, RTEMS_NO_TIMEOUT);

    for ( i = 0; i < OS_MAX_NUM_OPEN_FILES; i++)
    {
        if ((OS_FDTable[i].IsValid == TRUE) &&  (strcmp(OS_FDTable[i].Path, Filename) == 0))
        {
           /*
           ** Close the file
           */
           status = close ((int) OS_FDTable[i].OSfd);

           /*
           ** Next, remove the file from the OSAL list
           ** to free up that slot
           */
           OS_FDTable[i].OSfd =       -1;
           strcpy(OS_FDTable[i].Path, "\0");
           OS_FDTable[i].User =       0;
           OS_FDTable[i].IsValid =    FALSE;
           rtems_sc = rtems_semaphore_release (OS_FDTableSem);

           if (status == ERROR)
           {
              return(OS_FS_ERROR);
           }
           else
           {
              return(OS_FS_SUCCESS);
           }
        }

    }/* end for */

    rtems_sc = rtems_semaphore_release (OS_FDTableSem);
    return (OS_FS_ERR_PATH_INVALID);

}/* end OS_CloseFileByName */

开发者ID:gpgreen，项目名称:osal-beagleboard，代码行数:59，代码来源:osfileapi.c

注：本文中的rtems_semaphore_release函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtems_task_set_priority函数代码示例发布时间：2022-05-30

C++ rtems_semaphore_create函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17957|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rtems_semaphore_release函数代码示例

示例1: msdos_file_ftruncate

示例2: msdos_file_lseek

示例3: task

示例4: release_semaphore

示例5: msdos_file_open

示例6: OS_FileOpenCheck

示例7: rtems_termios_device_open

示例8: rtems_termios_write

示例9: msdos_file_sync

示例10: Task01

示例11: Task01

示例12: msdos_file_rmnod

示例13: msdos_file_write

示例14: task_pool_release

示例15: rtems_termios_device_install

示例16: grtm_open

示例17: OS_close

示例18: bfin_twi_isr

示例19: msdos_file_sync

示例20: OS_CloseFileByName

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053