C++ rtsx_pci_add_cmd函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtsx_pci_add_cmd函数的典型用法代码示例。如果您正苦于以下问题：C++ rtsx_pci_add_cmd函数的具体用法？C++ rtsx_pci_add_cmd怎么用？C++ rtsx_pci_add_cmd使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtsx_pci_add_cmd函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rts5249_fill_driving

static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
{
	u8 driving_3v3[4][3] = {
		{0x11, 0x11, 0x11},
		{0x55, 0x55, 0x5C},
		{0x99, 0x99, 0x92},
		{0x99, 0x99, 0x92},
	};
	u8 driving_1v8[4][3] = {
		{0x3C, 0x3C, 0x3C},
		{0xB3, 0xB3, 0xB3},
		{0xFE, 0xFE, 0xFE},
		{0xC4, 0xC4, 0xC4},
	};
	u8 (*driving)[3], drive_sel;

	if (voltage == OUTPUT_3V3) {
		driving = driving_3v3;
		drive_sel = pcr->sd30_drive_sel_3v3;
	} else {
		driving = driving_1v8;
		drive_sel = pcr->sd30_drive_sel_1v8;
	}

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
			0xFF, driving[drive_sel][0]);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
			0xFF, driving[drive_sel][1]);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
			0xFF, driving[drive_sel][2]);
}

开发者ID:3null，项目名称:linux，代码行数:31，代码来源:rts5249.c

示例2: rts5249_card_power_on

static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
{
	int err;

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			SD_POWER_MASK, SD_VCC_PARTIAL_POWER_ON);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0x02);
	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	msleep(5);

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			SD_POWER_MASK, SD_VCC_POWER_ON);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0x06);
	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	return 0;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:26，代码来源:rts5249.c

示例3: rtsx_pci_write_phy_register

int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
{
    int err, i, finished = 0;
    u8 tmp;

    rtsx_pci_init_cmd(pcr);

    rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA0, 0xFF, (u8)val);
    rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA1, 0xFF, (u8)(val >> 8));
    rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
    rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x81);

    err = rtsx_pci_send_cmd(pcr, 100);
    if (err < 0)
        return err;

    for (i = 0; i < 100000; i++) {
        err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
        if (err < 0)
            return err;

        if (!(tmp & 0x80)) {
            finished = 1;
            break;
        }
    }

    if (!finished)
        return -ETIMEDOUT;

    return 0;
}

开发者ID:auras76，项目名称:aur-kernel-XZxx，代码行数:32，代码来源:rtsx_pcr.c

示例4: rts5260_extra_init_hw

static int rts5260_extra_init_hw(struct rtsx_pcr *pcr)
{
	struct rtsx_cr_option *option = &pcr->option;

	/* Set mcu_cnt to 7 to ensure data can be sampled properly */
	rtsx_pci_write_register(pcr, 0xFC03, 0x7F, 0x07);
	rtsx_pci_write_register(pcr, SSC_DIV_N_0, 0xFF, 0x5D);

	rts5260_init_from_cfg(pcr);

	/* force no MDIO*/
	rtsx_pci_write_register(pcr, RTS5260_AUTOLOAD_CFG4,
				0xFF, RTS5260_MIMO_DISABLE);
	/*Modify SDVCC Tune Default Parameters!*/
	rtsx_pci_write_register(pcr, LDO_VCC_CFG0,
				RTS5260_DVCC_TUNE_MASK, RTS5260_DVCC_33);

	rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);

	rts5260_init_hw(pcr);

	/*
	 * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
	 * to drive low, and we forcibly request clock.
	 */
	if (option->force_clkreq_0)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
				 FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
	else
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
				 FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);

	return 0;
}

开发者ID:Anjali05，项目名称:linux，代码行数:34，代码来源:rts5260.c

示例5: ms_power_on

static int ms_power_on(struct realtek_pci_ms *host)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err;

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, MS_MOD_SEL);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,
			CARD_SHARE_MASK, CARD_SHARE_48_MS);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN,
			MS_CLK_EN, MS_CLK_EN);
	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	err = rtsx_pci_card_pull_ctl_enable(pcr, RTSX_MS_CARD);
	if (err < 0)
		return err;

	err = rtsx_pci_card_power_on(pcr, RTSX_MS_CARD);
	if (err < 0)
		return err;

	/* Wait ms power stable */
	msleep(150);

	err = rtsx_pci_write_register(pcr, CARD_OE,
			MS_OUTPUT_EN, MS_OUTPUT_EN);
	if (err < 0)
		return err;

	return 0;
}

开发者ID:jacobpan，项目名称:linux，代码行数:33，代码来源:rtsx_pci_ms.c

示例6: rts5249_card_power_off

static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
{
	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			SD_POWER_MASK, SD_POWER_OFF);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0x00);
	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:9，代码来源:rts5249.c

示例7: ms_transfer_data

static int ms_transfer_data(struct realtek_pci_ms *host, unsigned char data_dir,
		u8 tpc, u8 cfg, struct scatterlist *sg)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err;
	unsigned int length = sg->length;
	u16 sec_cnt = (u16)(length / 512);
	u8 val, trans_mode, dma_dir;

	dev_dbg(ms_dev(host), "%s: tpc = 0x%02x, data_dir = %s, length = %d\n",
			__func__, tpc, (data_dir == READ) ? "READ" : "WRITE",
			length);

	if (data_dir == READ) {
		dma_dir = DMA_DIR_FROM_CARD;
		trans_mode = MS_TM_AUTO_READ;
	} else {
		dma_dir = DMA_DIR_TO_CARD;
		trans_mode = MS_TM_AUTO_WRITE;
	}

	rtsx_pci_init_cmd(pcr);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_SECTOR_CNT_H,
			0xFF, (u8)(sec_cnt >> 8));
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_SECTOR_CNT_L,
			0xFF, (u8)sec_cnt);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
			DMA_DONE_INT, DMA_DONE_INT);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3, 0xFF, (u8)(length >> 24));
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2, 0xFF, (u8)(length >> 16));
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1, 0xFF, (u8)(length >> 8));
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF, (u8)length);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
			0x03 | DMA_PACK_SIZE_MASK, dma_dir | DMA_EN | DMA_512);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
			0x01, RING_BUFFER);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, MS_TRANSFER,
			0xFF, MS_TRANSFER_START | trans_mode);
	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, MS_TRANSFER,
			MS_TRANSFER_END, MS_TRANSFER_END);

	rtsx_pci_send_cmd_no_wait(pcr);

	err = rtsx_pci_transfer_data(pcr, sg, 1, data_dir == READ, 10000);
	if (err < 0) {
		ms_clear_error(host);
		return err;
	}

	rtsx_pci_read_register(pcr, MS_TRANS_CFG, &val);
	if (val & (MS_INT_CMDNK | MS_INT_ERR | MS_CRC16_ERR | MS_RDY_TIMEOUT))
		return -EIO;

	return 0;
}

开发者ID:jacobpan，项目名称:linux，代码行数:60，代码来源:rtsx_pci_ms.c

示例8: rtl8411_extra_init_hw

static int rtl8411_extra_init_hw(struct rtsx_pcr *pcr)
{
	rtsx_pci_init_cmd(pcr);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DRIVE_SEL,
			0xFF, pcr->sd30_drive_sel_3v3);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CD_PAD_CTL,
			CD_DISABLE_MASK | CD_AUTO_DISABLE, CD_ENABLE);

	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:020gzh，项目名称:linux，代码行数:11，代码来源:rtl8411.c

示例9: rts5209_extra_init_hw

static int rts5209_extra_init_hw(struct rtsx_pcr *pcr)
{
	rtsx_pci_init_cmd(pcr);

	/* Turn off LED */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO, 0xFF, 0x03);
	/* Configure GPIO as output */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO_DIR, 0xFF, 0x03);

	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:11，代码来源:rts5209.c

示例10: rts5229_extra_init_hw

static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
{
	rtsx_pci_init_cmd(pcr);

	/* Switch LDO3318 source from DV33 to card_3v3 */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFE78, 0x03, 0x00);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFE78, 0x03, 0x01);
	/* LED shine disabled, set initial shine cycle period */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFC1E, 0x0F, 0x02);

	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:rogerable，项目名称:realtek_cr_mfd，代码行数:12，代码来源:rts5229.c

示例11: rts5249_extra_init_hw

static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
{
	rtsx_pci_init_cmd(pcr);

	/* Configure GPIO as output */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
	/* Reset ASPM state to default value */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
	/* Switch LDO3318 source from DV33 to card_3v3 */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
	/* LED shine disabled, set initial shine cycle period */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
	/* Configure driving */
	rts5249_fill_driving(pcr, OUTPUT_3V3);
	if (pcr->flags & PCR_REVERSE_SOCKET)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
				AUTOLOAD_CFG_BASE + 3, 0xB0, 0xB0);
	else
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
				AUTOLOAD_CFG_BASE + 3, 0xB0, 0x80);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);

	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:3null，项目名称:linux，代码行数:25，代码来源:rts5249.c

示例12: sd_read_data

static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
		u8 *buf, int buf_len, int timeout)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err, i;
	u8 trans_mode;

	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__, cmd[0] - 0x40);

	if (!buf)
		buf_len = 0;

	if ((cmd[0] & 0x3F) == MMC_SEND_TUNING_BLOCK)
		trans_mode = SD_TM_AUTO_TUNING;
	else
		trans_mode = SD_TM_NORMAL_READ;

	rtsx_pci_init_cmd(pcr);

	for (i = 0; i < 5; i++)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0 + i, 0xFF, cmd[i]);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H,
			0xFF, (u8)(byte_cnt >> 8));
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
			SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
	if (trans_mode != SD_TM_AUTO_TUNING)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
				CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
			0xFF, trans_mode | SD_TRANSFER_START);
	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
			SD_TRANSFER_END, SD_TRANSFER_END);

	err = rtsx_pci_send_cmd(pcr, timeout);
	if (err < 0) {
		sd_print_debug_regs(host);
		dev_dbg(sdmmc_dev(host),
			"rtsx_pci_send_cmd fail (err = %d)\n", err);
		return err;
	}

	if (buf && buf_len) {
		err = rtsx_pci_read_ppbuf(pcr, buf, buf_len);
		if (err < 0) {
			dev_dbg(sdmmc_dev(host),
				"rtsx_pci_read_ppbuf fail (err = %d)\n", err);
			return err;
		}
	}

	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:59，代码来源:rtsx_pci_sdmmc.c

示例13: rtl8411b_extra_init_hw

static int rtl8411b_extra_init_hw(struct rtsx_pcr *pcr)
{
	rtsx_pci_init_cmd(pcr);

	if (rtl8411b_is_qfn48(pcr))
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
				CARD_PULL_CTL3, 0xFF, 0xF5);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DRIVE_SEL,
			0xFF, pcr->sd30_drive_sel_3v3);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CD_PAD_CTL,
			CD_DISABLE_MASK | CD_AUTO_DISABLE, CD_ENABLE);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, FUNC_FORCE_CTL,
			0x06, 0x00);

	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:020gzh，项目名称:linux，代码行数:16，代码来源:rtl8411.c

示例14: rtsx_pci_read_phy_register

int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
{
    int err, i, finished = 0;
    u16 data;
    u8 *ptr, tmp;

    rtsx_pci_init_cmd(pcr);

    rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
    rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x80);

    err = rtsx_pci_send_cmd(pcr, 100);
    if (err < 0)
        return err;

    for (i = 0; i < 100000; i++) {
        err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
        if (err < 0)
            return err;

        if (!(tmp & 0x80)) {
            finished = 1;
            break;
        }
    }

    if (!finished)
        return -ETIMEDOUT;

    rtsx_pci_init_cmd(pcr);

    rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA0, 0, 0);
    rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA1, 0, 0);

    err = rtsx_pci_send_cmd(pcr, 100);
    if (err < 0)
        return err;

    ptr = rtsx_pci_get_cmd_data(pcr);
    data = ((u16)ptr[1] << 8) | ptr[0];

    if (val)
        *val = data;

    return 0;
}

开发者ID:auras76，项目名称:aur-kernel-XZxx，代码行数:46，代码来源:rtsx_pcr.c

示例15: sd_change_phase

static int sd_change_phase(struct realtek_pci_sdmmc *host,
		u8 sample_point, bool rx)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err;

	dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n",
			__func__, rx ? "RX" : "TX", sample_point);

	rtsx_pci_init_cmd(pcr);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
	if (rx)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
				SD_VPRX_CTL, 0x1F, sample_point);
	else
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
				SD_VPTX_CTL, 0x1F, sample_point);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
			PHASE_NOT_RESET, PHASE_NOT_RESET);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, 0);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);

	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:30，代码来源:rtsx_pci_sdmmc.c

示例16: rts5209_card_power_off

static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card)
{
	u8 pwr_mask, pwr_off;

	pwr_mask = SD_POWER_MASK;
	pwr_off = SD_POWER_OFF;

	if (pcr->ms_pmos && (card == RTSX_MS_CARD)) {
		pwr_mask = MS_POWER_MASK;
		pwr_off = MS_POWER_OFF;
	}

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			pwr_mask | PMOS_STRG_MASK, pwr_off | PMOS_STRG_400mA);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0X06);
	return rtsx_pci_send_cmd(pcr, 100);
}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:19，代码来源:rts5209.c

示例17: ms_power_off

static int ms_power_off(struct realtek_pci_ms *host)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err;

	rtsx_pci_init_cmd(pcr);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, MS_CLK_EN, 0);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE, MS_OUTPUT_EN, 0);

	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	err = rtsx_pci_card_power_off(pcr, RTSX_MS_CARD);
	if (err < 0)
		return err;

	return rtsx_pci_card_pull_ctl_disable(pcr, RTSX_MS_CARD);
}

开发者ID:jacobpan，项目名称:linux，代码行数:20，代码来源:rtsx_pci_ms.c

示例18: sd_print_debug_regs

static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
{
	struct rtsx_pcr *pcr = host->pcr;
	u16 i;
	u8 *ptr;

	/* Print SD host internal registers */
	rtsx_pci_init_cmd(pcr);
	for (i = 0xFDA0; i <= 0xFDAE; i++)
		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
	for (i = 0xFD52; i <= 0xFD69; i++)
		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
	rtsx_pci_send_cmd(pcr, 100);

	ptr = rtsx_pci_get_cmd_data(pcr);
	for (i = 0xFDA0; i <= 0xFDAE; i++)
		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
	for (i = 0xFD52; i <= 0xFD69; i++)
		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
}

开发者ID:383530895，项目名称:linux，代码行数:20，代码来源:rtsx_pci_sdmmc.c

示例19: sd_write_data

static int sd_write_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
		u8 *buf, int buf_len, int timeout)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err, i;
	u8 trans_mode;

	if (!buf)
		buf_len = 0;

	if (buf && buf_len) {
		err = rtsx_pci_write_ppbuf(pcr, buf, buf_len);
		if (err < 0) {
			dev_dbg(sdmmc_dev(host),
				"rtsx_pci_write_ppbuf fail (err = %d)\n", err);
			return err;
		}
	}

	trans_mode = cmd ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3;
	rtsx_pci_init_cmd(pcr);

	if (cmd) {
		dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d\n", __func__,
				cmd[0] - 0x40);

		for (i = 0; i < 5; i++)
			rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
					SD_CMD0 + i, 0xFF, cmd[i]);
	}

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H,
			0xFF, (u8)(byte_cnt >> 8));
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
		SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
		SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);

	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
			trans_mode | SD_TRANSFER_START);
	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
			SD_TRANSFER_END, SD_TRANSFER_END);

	err = rtsx_pci_send_cmd(pcr, timeout);
	if (err < 0) {
		sd_print_debug_regs(host);
		dev_dbg(sdmmc_dev(host),
			"rtsx_pci_send_cmd fail (err = %d)\n", err);
		return err;
	}

	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:56，代码来源:rtsx_pci_sdmmc.c

示例20: rts5249_extra_init_hw

static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
{
	struct rtsx_cr_option *option = &(pcr->option);

	rts5249_init_from_cfg(pcr);
	rts5249_init_from_hw(pcr);

	rtsx_pci_init_cmd(pcr);

	/* Rest L1SUB Config */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, L1SUB_CONFIG3, 0xFF, 0x00);
	/* Configure GPIO as output */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
	/* Reset ASPM state to default value */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
	/* Switch LDO3318 source from DV33 to card_3v3 */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
	/* LED shine disabled, set initial shine cycle period */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
	/* Configure driving */
	rts5249_fill_driving(pcr, OUTPUT_3V3);
	if (pcr->flags & PCR_REVERSE_SOCKET)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0xB0);
	else
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0x80);

	/*
	 * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
	 * to drive low, and we forcibly request clock.
	 */
	if (option->force_clkreq_0)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
			FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
	else
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
			FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);

	return rtsx_pci_send_cmd(pcr, CMD_TIMEOUT_DEF);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:40，代码来源:rts5249.c

注：本文中的rtsx_pci_add_cmd函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtsx_pci_init_cmd函数代码示例发布时间：2022-05-30

C++ rts_error函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17957|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rtsx_pci_add_cmd函数代码示例

示例1: rts5249_fill_driving

示例2: rts5249_card_power_on

示例3: rtsx_pci_write_phy_register

示例4: rts5260_extra_init_hw

示例5: ms_power_on

示例6: rts5249_card_power_off

示例7: ms_transfer_data

示例8: rtl8411_extra_init_hw

示例9: rts5209_extra_init_hw

示例10: rts5229_extra_init_hw

示例11: rts5249_extra_init_hw

示例12: sd_read_data

示例13: rtl8411b_extra_init_hw

示例14: rtsx_pci_read_phy_register

示例15: sd_change_phase

示例16: rts5209_card_power_off

示例17: ms_power_off

示例18: sd_print_debug_regs

示例19: sd_write_data

示例20: rts5249_extra_init_hw

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053