• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ rtsx_pci_write_register函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rtsx_pci_write_register函数的典型用法代码示例。如果您正苦于以下问题：C++ rtsx_pci_write_register函数的具体用法？C++ rtsx_pci_write_register怎么用？C++ rtsx_pci_write_register使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rtsx_pci_write_register函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rts5260_extra_init_hw

static int rts5260_extra_init_hw(struct rtsx_pcr *pcr)
{
	struct rtsx_cr_option *option = &pcr->option;

	/* Set mcu_cnt to 7 to ensure data can be sampled properly */
	rtsx_pci_write_register(pcr, 0xFC03, 0x7F, 0x07);
	rtsx_pci_write_register(pcr, SSC_DIV_N_0, 0xFF, 0x5D);

	rts5260_init_from_cfg(pcr);

	/* force no MDIO*/
	rtsx_pci_write_register(pcr, RTS5260_AUTOLOAD_CFG4,
				0xFF, RTS5260_MIMO_DISABLE);
	/*Modify SDVCC Tune Default Parameters!*/
	rtsx_pci_write_register(pcr, LDO_VCC_CFG0,
				RTS5260_DVCC_TUNE_MASK, RTS5260_DVCC_33);

	rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);

	rts5260_init_hw(pcr);

	/*
	 * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
	 * to drive low, and we forcibly request clock.
	 */
	if (option->force_clkreq_0)
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
				 FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
	else
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
				 FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);

	return 0;
}
开发者ID:Anjali05，项目名称:linux，代码行数:34，代码来源:rts5260.c


示例2: rts5260_init_ocp

static void rts5260_init_ocp(struct rtsx_pcr *pcr)
{
	struct rtsx_cr_option *option = &pcr->option;

	if (option->ocp_en) {
		u8 mask, val;


		rtsx_pci_write_register(pcr, RTS5260_DVCC_CTRL,
				RTS5260_DVCC_OCP_THD_MASK,
				option->sd_800mA_ocp_thd);

		rtsx_pci_write_register(pcr, RTS5260_DV331812_CFG,
				RTS5260_DV331812_OCP_THD_MASK,
				RTS5260_DV331812_OCP_THD_270);

		mask = SD_OCP_GLITCH_MASK;
		val = pcr->hw_param.ocp_glitch;
		rtsx_pci_write_register(pcr, REG_OCPGLITCH, mask, val);
		rtsx_pci_write_register(pcr, RTS5260_DVCC_CTRL,
					RTS5260_DVCC_OCP_EN |
					RTS5260_DVCC_OCP_CL_EN,
					RTS5260_DVCC_OCP_EN |
					RTS5260_DVCC_OCP_CL_EN);

		rtsx_pci_enable_ocp(pcr);
	} else {
		rtsx_pci_write_register(pcr, RTS5260_DVCC_CTRL,
					RTS5260_DVCC_OCP_EN |
					RTS5260_DVCC_OCP_CL_EN, 0);
	}
}
开发者ID:Anjali05，项目名称:linux，代码行数:32，代码来源:rts5260.c


示例3: rts524a_extra_init_hw

static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
{
	rts5249_extra_init_hw(pcr);

	rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
		FORCE_ASPM_L1_EN, FORCE_ASPM_L1_EN);
	rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
	rtsx_pci_write_register(pcr, LDO_VCC_CFG1, LDO_VCC_LMT_EN,
		LDO_VCC_LMT_EN);
	rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
	if (is_version(pcr, 0x524A, IC_VER_A)) {
		rtsx_pci_write_register(pcr, LDO_DV18_CFG,
			LDO_DV18_SR_MASK, LDO_DV18_SR_DF);
		rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
			LDO_VCC_REF_TUNE_MASK, LDO_VCC_REF_1V2);
		rtsx_pci_write_register(pcr, LDO_VIO_CFG,
			LDO_VIO_REF_TUNE_MASK, LDO_VIO_REF_1V2);
		rtsx_pci_write_register(pcr, LDO_VIO_CFG,
			LDO_VIO_SR_MASK, LDO_VIO_SR_DF);
		rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
			LDO_REF12_TUNE_MASK, LDO_REF12_TUNE_DF);
		rtsx_pci_write_register(pcr, SD40_LDO_CTL1,
			SD40_VIO_TUNE_MASK, SD40_VIO_TUNE_1V7);
	}

	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:27，代码来源:rts5249.c


示例4: rtl8411_do_switch_output_voltage

static int rtl8411_do_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage,
		int bpp_tuned18_shift, int bpp_asic_1v8)
{
	u8 mask, val;
	int err;

	mask = (BPP_REG_TUNED18 << bpp_tuned18_shift) | BPP_PAD_MASK;
	if (voltage == OUTPUT_3V3) {
		err = rtsx_pci_write_register(pcr,
				SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
		if (err < 0)
			return err;
		val = (BPP_ASIC_3V3 << bpp_tuned18_shift) | BPP_PAD_3V3;
	} else if (voltage == OUTPUT_1V8) {
		err = rtsx_pci_write_register(pcr,
				SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
		if (err < 0)
			return err;
		val = (bpp_asic_1v8 << bpp_tuned18_shift) | BPP_PAD_1V8;
	} else {
		return -EINVAL;
	}

	return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
}
开发者ID:020gzh，项目名称:linux，代码行数:25，代码来源:rtl8411.c


示例5: rtsx_pci_ms_handle_req

static void rtsx_pci_ms_handle_req(struct work_struct *work)
{
	struct realtek_pci_ms *host = container_of(work,
			struct realtek_pci_ms, handle_req);
	struct rtsx_pcr *pcr = host->pcr;
	struct memstick_host *msh = host->msh;
	int rc;

	mutex_lock(&pcr->pcr_mutex);

	rtsx_pci_start_run(pcr);

	rtsx_pci_switch_clock(host->pcr, host->clock, host->ssc_depth,
			false, true, false);
	rtsx_pci_write_register(pcr, CARD_SELECT, 0x07, MS_MOD_SEL);
	rtsx_pci_write_register(pcr, CARD_SHARE_MODE,
			CARD_SHARE_MASK, CARD_SHARE_48_MS);

	if (!host->req) {
		do {
			rc = memstick_next_req(msh, &host->req);
			dev_dbg(ms_dev(host), "next req %d\n", rc);

			if (!rc)
				host->req->error = rtsx_pci_ms_issue_cmd(host);
		} while (!rc);
	}

	mutex_unlock(&pcr->pcr_mutex);
}
开发者ID:jacobpan，项目名称:linux，代码行数:30，代码来源:rtsx_pci_ms.c


示例6: rts5229_switch_output_voltage

static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
    int err;

    if (voltage == OUTPUT_3V3) {
        err = rtsx_pci_write_register(pcr,
                                      SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
        if (err < 0)
            return err;
        err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
        if (err < 0)
            return err;
    } else if (voltage == OUTPUT_1V8) {
        err = rtsx_pci_write_register(pcr,
                                      SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
        if (err < 0)
            return err;
        err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
        if (err < 0)
            return err;
    } else {
        return -EINVAL;
    }

    return 0;
}
开发者ID:nemumu，项目名称:linux，代码行数:26，代码来源:rts5229.c


示例7: rtsx_pci_ms_set_param

static int rtsx_pci_ms_set_param(struct memstick_host *msh,
		enum memstick_param param, int value)
{
	struct realtek_pci_ms *host = memstick_priv(msh);
	struct rtsx_pcr *pcr = host->pcr;
	unsigned int clock = 0;
	u8 ssc_depth = 0;
	int err;

	dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n",
			__func__, param, value);

	err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_MS_CARD);
	if (err)
		return err;

	switch (param) {
	case MEMSTICK_POWER:
		if (value == MEMSTICK_POWER_ON)
			err = ms_power_on(host);
		else if (value == MEMSTICK_POWER_OFF)
			err = ms_power_off(host);
		else
			return -EINVAL;
		break;

	case MEMSTICK_INTERFACE:
		if (value == MEMSTICK_SERIAL) {
			clock = 19000000;
			ssc_depth = RTSX_SSC_DEPTH_500K;

			err = rtsx_pci_write_register(pcr, MS_CFG,
					0x18, MS_BUS_WIDTH_1);
			if (err < 0)
				return err;
		} else if (value == MEMSTICK_PAR4) {
			clock = 39000000;
			ssc_depth = RTSX_SSC_DEPTH_1M;

			err = rtsx_pci_write_register(pcr, MS_CFG,
					0x58, MS_BUS_WIDTH_4 | PUSH_TIME_ODD);
			if (err < 0)
				return err;
		} else {
			return -EINVAL;
		}

		err = rtsx_pci_switch_clock(pcr, clock,
				ssc_depth, false, true, false);
		if (err < 0)
			return err;

		host->ssc_depth = ssc_depth;
		host->clock = clock;
		host->ifmode = value;
		break;
	}

	return 0;
}
开发者ID:jacobpan，项目名称:linux，代码行数:60，代码来源:rtsx_pci_ms.c


示例8: rtsx_pci_stop_cmd

void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
{
    rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
    rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);

    rtsx_pci_write_register(pcr, DMACTL, 0x80, 0x80);
    rtsx_pci_write_register(pcr, RBCTL, 0x80, 0x80);
}
开发者ID:auras76，项目名称:aur-kernel-XZxx，代码行数:8，代码来源:rtsx_pcr.c


示例9: rts5260_stop_cmd

static void rts5260_stop_cmd(struct rtsx_pcr *pcr)
{
	rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
	rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
	rtsx_pci_write_register(pcr, RTS5260_DMA_RST_CTL_0,
				RTS5260_DMA_RST | RTS5260_ADMA3_RST,
				RTS5260_DMA_RST | RTS5260_ADMA3_RST);
	rtsx_pci_write_register(pcr, RBCTL, RB_FLUSH, RB_FLUSH);
}
开发者ID:Anjali05，项目名称:linux，代码行数:9，代码来源:rts5260.c


示例10: sd_set_sample_push_timing_sd30

static int sd_set_sample_push_timing_sd30(struct rtsx_pcr *pcr)
{
	rtsx_pci_write_register(pcr, SD_CFG1, SD_MODE_SELECT_MASK
		| SD_ASYNC_FIFO_NOT_RST, SD_30_MODE | SD_ASYNC_FIFO_NOT_RST);
	rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
	rtsx_pci_write_register(pcr, CARD_CLK_SOURCE, 0xFF,
			CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
	rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);

	return 0;
}
开发者ID:Anjali05，项目名称:linux，代码行数:11，代码来源:rts5260.c


示例11: rts5249_force_power_down

static void rts5249_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
{
	/* Set relink_time to 0 */
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);

	if (pm_state == HOST_ENTER_S3)
		rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);

	rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
}
开发者ID:3null，项目名称:linux，代码行数:12，代码来源:rts5249.c


示例12: rtl8411_card_power_off

static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
{
	int err;

	err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
			BPP_POWER_MASK, BPP_POWER_OFF);
	if (err < 0)
		return err;

	return rtsx_pci_write_register(pcr, LDO_CTL,
			BPP_LDO_POWB, BPP_LDO_SUSPEND);
}
开发者ID:020gzh，项目名称:linux，代码行数:12，代码来源:rtl8411.c


示例13: rtsx_base_force_power_down

static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
{
	/* Set relink_time to 0 */
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);

	if (pm_state == HOST_ENTER_S3)
		rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3,
			D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);

	rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:13，代码来源:rts5249.c


示例14: rts5260_card_power_off

static int rts5260_card_power_off(struct rtsx_pcr *pcr, int card)
{
	int err = 0;

	rts5260_card_before_power_off(pcr);
	err = rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
			 LDO_POW_SDVDD1_MASK, LDO_POW_SDVDD1_OFF);
	err = rtsx_pci_write_register(pcr, LDO_CONFIG2,
			 DV331812_POWERON, DV331812_POWEROFF);
	if (pcr->option.ocp_en)
		rtsx_pci_disable_ocp(pcr);

	return err;
}
开发者ID:Anjali05，项目名称:linux，代码行数:14，代码来源:rts5260.c


示例15: rtsx_base_force_power_down

static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
{
	/* Set relink_time to 0 */
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, MASK_8_BIT_DEF, 0);
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, MASK_8_BIT_DEF, 0);
	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3,
				RELINK_TIME_MASK, 0);

	if (pm_state == HOST_ENTER_S3)
		rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3,
					D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);

	rtsx_pci_write_register(pcr, FPDCTL, ALL_POWER_DOWN, ALL_POWER_DOWN);
}
开发者ID:Anjali05，项目名称:linux，代码行数:14，代码来源:rts5260.c


示例16: rts525a_optimize_phy

static int rts525a_optimize_phy(struct rtsx_pcr *pcr)
{
	int err;

	err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
		D3_DELINK_MODE_EN, 0x00);
	if (err < 0)
		return err;

	rtsx_pci_write_phy_register(pcr, _PHY_FLD0,
		_PHY_FLD0_CLK_REQ_20C | _PHY_FLD0_RX_IDLE_EN |
		_PHY_FLD0_BIT_ERR_RSTN | _PHY_FLD0_BER_COUNT |
		_PHY_FLD0_BER_TIMER | _PHY_FLD0_CHECK_EN);

	rtsx_pci_write_phy_register(pcr, _PHY_ANA03,
		_PHY_ANA03_TIMER_MAX | _PHY_ANA03_OOBS_DEB_EN |
		_PHY_CMU_DEBUG_EN);

	if (is_version(pcr, 0x525A, IC_VER_A))
		rtsx_pci_write_phy_register(pcr, _PHY_REV0,
			_PHY_REV0_FILTER_OUT | _PHY_REV0_CDR_BYPASS_PFD |
			_PHY_REV0_CDR_RX_IDLE_BYPASS);

	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:25，代码来源:rts5249.c


示例17: ms_power_on

static int ms_power_on(struct realtek_pci_ms *host)
{
	struct rtsx_pcr *pcr = host->pcr;
	int err;

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, MS_MOD_SEL);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,
			CARD_SHARE_MASK, CARD_SHARE_48_MS);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN,
			MS_CLK_EN, MS_CLK_EN);
	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	err = rtsx_pci_card_pull_ctl_enable(pcr, RTSX_MS_CARD);
	if (err < 0)
		return err;

	err = rtsx_pci_card_power_on(pcr, RTSX_MS_CARD);
	if (err < 0)
		return err;

	/* Wait ms power stable */
	msleep(150);

	err = rtsx_pci_write_register(pcr, CARD_OE,
			MS_OUTPUT_EN, MS_OUTPUT_EN);
	if (err < 0)
		return err;

	return 0;
}
开发者ID:jacobpan，项目名称:linux，代码行数:33，代码来源:rtsx_pci_ms.c


示例18: rts5260_enable_ocp

static void rts5260_enable_ocp(struct rtsx_pcr *pcr)
{
	u8 val = 0;

	val = SD_OCP_INT_EN | SD_DETECT_EN;
	rtsx_pci_write_register(pcr, REG_OCPCTL, 0xFF, val);

}
开发者ID:Anjali05，项目名称:linux，代码行数:8，代码来源:rts5260.c


示例19: rts5260_disable_ocp

static void rts5260_disable_ocp(struct rtsx_pcr *pcr)
{
	u8 mask = 0;

	mask = SD_OCP_INT_EN | SD_DETECT_EN;
	rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);

}
开发者ID:Anjali05，项目名称:linux，代码行数:8，代码来源:rts5260.c


示例20: rts5260_clear_ocpstat

static void rts5260_clear_ocpstat(struct rtsx_pcr *pcr)
{
	u8 mask = 0;
	u8 val = 0;

	mask = SD_OCP_INT_CLR | SD_OC_CLR;
	val = SD_OCP_INT_CLR | SD_OC_CLR;

	rtsx_pci_write_register(pcr, REG_OCPCTL, mask, val);
	rtsx_pci_write_register(pcr, REG_DV3318_OCPCTL,
				DV3318_OCP_INT_CLR | DV3318_OCP_CLR,
				DV3318_OCP_INT_CLR | DV3318_OCP_CLR);
	udelay(10);
	rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
	rtsx_pci_write_register(pcr, REG_DV3318_OCPCTL,
				DV3318_OCP_INT_CLR | DV3318_OCP_CLR, 0);
}
开发者ID:Anjali05，项目名称:linux，代码行数:17，代码来源:rts5260.c



注：本文中的rtsx_pci_write_register函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ rtthread_startup函数代码示例发布时间：2022-05-30
下一篇：
C++ rtsx_pci_send_cmd函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap