本文整理汇总了C++中rtw_free_xmitbuf函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_free_xmitbuf函数的具体用法？C++ rtw_free_xmitbuf怎么用？C++ rtw_free_xmitbuf使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了rtw_free_xmitbuf函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rtl8188es_dequeue_writeport
//todo: static
s32 rtl8188es_dequeue_writeport(PADAPTER padapter, u8 *freePage)
{
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
struct xmit_buf *pxmitbuf;
PADAPTER pri_padapter = padapter;
s32 ret = 0;
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->adapter_type > 0)
pri_padapter = padapter->pbuddy_adapter;
if(rtw_buddy_adapter_up(padapter))
ret = check_buddy_fwstate( padapter, _FW_UNDER_SURVEY);
#endif
ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);
if (_TRUE == ret)
pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
else
pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL)
return _TRUE;
query_free_page:
// check if hardware tx fifo page is enough
if( _FALSE == rtl8188es_query_tx_freepage(pri_padapter, pxmitbuf))
{
rtw_msleep_os(1);
goto query_free_page;
}
if ((padapter->bSurpriseRemoved == _TRUE)
|| (padapter->bDriverStopped == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
||((padapter->pbuddy_adapter)
&& ((padapter->pbuddy_adapter->bSurpriseRemoved) ||(padapter->pbuddy_adapter->bDriverStopped)))
#endif
){
RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
goto free_xmitbuf;
}
rtw_write_port(padapter, ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr), pxmitbuf->len, (u8 *)pxmitbuf);
free_xmitbuf:
//rtw_free_xmitframe(pxmitpriv, pframe);
//pxmitbuf->priv_data = NULL;
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
#ifdef CONFIG_SDIO_TX_TASKLET
tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
#endif
return _FAIL;
}
开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:61，代码来源:rtl8189es_xmit.c
示例2: pre_xmitframe
/*
* Return
* _TRUE dump packet directly
* _FALSE enqueue packet
*/
static s32 pre_xmitframe(_adapter *padapter, struct xmit_frame *pxmitframe)
{
_irqL irqL;
s32 res;
struct xmit_buf *pxmitbuf = NULL;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
_enter_critical_bh(&pxmitpriv->lock, &irqL);
//DBG_8192C("==> %s \n",__FUNCTION__);
if (rtw_txframes_sta_ac_pending(padapter, pattrib) > 0)
{
//DBG_8192C("enqueue AC(%d)\n",pattrib->priority);
goto enqueue;
}
if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
goto enqueue;
#ifdef CONFIG_CONCURRENT_MODE
if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
goto enqueue;
#endif
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL)
goto enqueue;
_exit_critical_bh(&pxmitpriv->lock, &irqL);
pxmitframe->pxmitbuf = pxmitbuf;
pxmitframe->buf_addr = pxmitbuf->pbuf;
pxmitbuf->priv_data = pxmitframe;
if (xmitframe_direct(padapter, pxmitframe) != _SUCCESS) {
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
rtw_free_xmitframe(pxmitpriv, pxmitframe);
}
return _TRUE;
enqueue:
res = rtw_xmitframe_enqueue(padapter, pxmitframe);
_exit_critical_bh(&pxmitpriv->lock, &irqL);
if (res != _SUCCESS) {
RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n"));
rtw_free_xmitframe(pxmitpriv, pxmitframe);
pxmitpriv->tx_drop++;
return _TRUE;
}
return _FALSE;
}
开发者ID:AndyPi，项目名称:rtl8812au_rtl8821au，代码行数:64，代码来源:rtl8812au_xmit.c
示例3: rtw_hal_xmit
/*
* Return
* true dump packet directly
* false enqueue packet
*/
s32 rtw_hal_xmit(struct adapter *adapt, struct xmit_frame *pxmitframe)
{
s32 res;
struct xmit_buf *pxmitbuf = NULL;
struct xmit_priv *pxmitpriv = &adapt->xmitpriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct mlme_priv *pmlmepriv = &adapt->mlmepriv;
spin_lock_bh(&pxmitpriv->lock);
if (rtw_txframes_sta_ac_pending(adapt, pattrib) > 0)
goto enqueue;
if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == true)
goto enqueue;
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (!pxmitbuf)
goto enqueue;
spin_unlock_bh(&pxmitpriv->lock);
pxmitframe->pxmitbuf = pxmitbuf;
pxmitframe->buf_addr = pxmitbuf->pbuf;
pxmitbuf->priv_data = pxmitframe;
res = rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe);
if (res == _SUCCESS) {
rtw_dump_xframe(adapt, pxmitframe);
} else {
DBG_88E("==> %s xmitframe_coalsece failed\n", __func__);
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
rtw_free_xmitframe(pxmitpriv, pxmitframe);
}
return true;
enqueue:
res = rtw_xmitframe_enqueue(adapt, pxmitframe);
spin_unlock_bh(&pxmitpriv->lock);
if (res != _SUCCESS) {
RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n"));
rtw_free_xmitframe(pxmitpriv, pxmitframe);
/* Trick, make the statistics correct */
pxmitpriv->tx_pkts--;
pxmitpriv->tx_drop++;
return true;
}
return false;
}
开发者ID:acton393，项目名称:linux，代码行数:59，代码来源:rtl8188eu_xmit.c
示例4: pre_xmitframe
/*
* Return
* true dump packet directly
* false enqueue packet
*/
static s32 pre_xmitframe(struct adapter *padapter, struct xmit_frame *pxmitframe)
{
unsigned long irqL;
s32 res;
struct xmit_buf *pxmitbuf = NULL;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
_enter_critical_bh(&pxmitpriv->lock, &irqL);
if (rtw_txframes_sta_ac_pending(padapter, pattrib) > 0)
{
goto enqueue;
}
if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == true)
goto enqueue;
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL)
goto enqueue;
_exit_critical_bh(&pxmitpriv->lock, &irqL);
pxmitframe->pxmitbuf = pxmitbuf;
pxmitframe->buf_addr = pxmitbuf->pbuf;
pxmitbuf->priv_data = pxmitframe;
if (xmitframe_direct(padapter, pxmitframe) != _SUCCESS) {
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
rtw_free_xmitframe(pxmitpriv, pxmitframe);
}
return true;
enqueue:
res = rtw_xmitframe_enqueue(padapter, pxmitframe);
_exit_critical_bh(&pxmitpriv->lock, &irqL);
if (res != _SUCCESS) {
RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n"));
rtw_free_xmitframe(pxmitpriv, pxmitframe);
/* Trick, make the statistics correct */
pxmitpriv->tx_pkts--;
pxmitpriv->tx_drop++;
return true;
}
return false;
}
开发者ID:simar7，项目名称:rtl8188eu，代码行数:58，代码来源:rtl8188eu_xmit.c
示例5: rtl8195as_dequeue_writeport
s32 rtl8195as_dequeue_writeport(PADAPTER padapter)
{
struct xmit_buf *pxmitbuf;
_func_enter_;
pxmitbuf = rtw_dequeue_xmitbuf(padapter);
if(pxmitbuf == NULL)
return _TRUE;
rtw_write_port(padapter, WLAN_TX_FIFO_DEVICE_ID, pxmitbuf->pkt_len, pxmitbuf->pdata);
rtw_free_xmitbuf(padapter, pxmitbuf);
_func_exit_;
return _FAIL;
}
开发者ID:yangkunming99，项目名称:linux_inic，代码行数:12，代码来源:rtl8195as_xmit.c
示例6: pre_xmitframe
/*
* Return
* _TRUE dump packet directly
* _FALSE enqueue packet
*/
static s32 pre_xmitframe(_adapter *padapter, struct xmit_frame *pxmitframe)
{
_irqL irqL;
s32 res;
struct xmit_buf *pxmitbuf = NULL;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
_enter_critical_bh(&pxmitpriv->lock, &irqL);
if ( (rtw_txframes_sta_ac_pending(padapter, pattrib) > 0) ||
(check_nic_enough_desc(padapter, pattrib) == _FALSE))
goto enqueue;
if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE)
goto enqueue;
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL)
goto enqueue;
_exit_critical_bh(&pxmitpriv->lock, &irqL);
pxmitframe->pxmitbuf = pxmitbuf;
pxmitframe->buf_addr = pxmitbuf->pbuf;
pxmitbuf->priv_data = pxmitframe;
if (xmitframe_direct(padapter, pxmitframe) != _SUCCESS) {
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
rtw_free_xmitframe(pxmitpriv, pxmitframe);
}
return _TRUE;
enqueue:
res = rtw_xmitframe_enqueue(padapter, pxmitframe);
_exit_critical_bh(&pxmitpriv->lock, &irqL);
if (res != _SUCCESS) {
RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n"));
rtw_free_xmitframe(pxmitpriv, pxmitframe);
// Trick, make the statistics correct
pxmitpriv->tx_pkts--;
pxmitpriv->tx_drop++;
return _TRUE;
}
return _FALSE;
}
开发者ID:releung，项目名称:s82_kernel，代码行数:58，代码来源:rtl8192de_xmit.c
示例7: rtl8723bs_mgnt_xmit
s32 rtl8723bs_mgnt_xmit(PADAPTER padapter, struct xmit_frame *pmgntframe)
{
s32 ret = _SUCCESS;
struct pkt_attrib *pattrib;
struct xmit_buf *pxmitbuf;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
u8 *pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
u8 txdesc_size = TXDESC_SIZE;
RT_TRACE(_module_hal_xmit_c_, _drv_info_, ("+%s\n", __FUNCTION__));
pattrib = &pmgntframe->attrib;
pxmitbuf = pmgntframe->pxmitbuf;
rtl8723b_update_txdesc(pmgntframe, pmgntframe->buf_addr);
pxmitbuf->len = txdesc_size + pattrib->last_txcmdsz;
//pmgntframe->pg_num = (pxmitbuf->len + 127)/128; // 128 is tx page size
pxmitbuf->pg_num = (pxmitbuf->len + 127)/128; // 128 is tx page size
pxmitbuf->ptail = pmgntframe->buf_addr + pxmitbuf->len;
pxmitbuf->ff_hwaddr = rtw_get_ff_hwaddr(pmgntframe);
rtw_count_tx_stats(padapter, pmgntframe, pattrib->last_txcmdsz);
rtw_free_xmitframe(pxmitpriv, pmgntframe);
pxmitbuf->priv_data = NULL;
if(GetFrameSubType(pframe)==WIFI_BEACON) //dump beacon directly
{
rtw_write_port(padapter, pdvobjpriv->Queue2Pipe[pxmitbuf->ff_hwaddr], pxmitbuf->len, (u8 *)pxmitbuf);
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
}
else
{
enqueue_pending_xmitbuf(pxmitpriv, pxmitbuf);
}
if (ret != _SUCCESS)
rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN);
return ret;
}
开发者ID:avila-devlogic，项目名称:D33_KK_Kernel，代码行数:45，代码来源:rtl8723bs_xmit.c
示例8: rtl8723bs_free_xmit_priv
void rtl8723bs_free_xmit_priv(PADAPTER padapter)
{
PHAL_DATA_TYPE phal;
struct xmit_priv *pxmitpriv;
struct xmit_buf *pxmitbuf;
_queue *pqueue;
_list *plist, *phead;
_list tmplist;
_irqL irql;
phal = GET_HAL_DATA(padapter);
pxmitpriv = &padapter->xmitpriv;
pqueue = &pxmitpriv->pending_xmitbuf_queue;
phead = get_list_head(pqueue);
_rtw_init_listhead(&tmplist);
_enter_critical_bh(&pqueue->lock, &irql);
if (_rtw_queue_empty(pqueue) == _FALSE)
{
// Insert tmplist to end of queue, and delete phead
// then tmplist become head of queue.
rtw_list_insert_tail(&tmplist, phead);
rtw_list_delete(phead);
}
_exit_critical_bh(&pqueue->lock, &irql);
phead = &tmplist;
while (rtw_is_list_empty(phead) == _FALSE)
{
plist = get_next(phead);
rtw_list_delete(plist);
pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list);
rtw_free_xmitframe(pxmitpriv, (struct xmit_frame*)pxmitbuf->priv_data);
pxmitbuf->priv_data = NULL;
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
}
_rtw_spinlock_free(&phal->SdioTxFIFOFreePageLock);
}
开发者ID:avila-devlogic，项目名称:D33_KK_Kernel，代码行数:41，代码来源:rtl8723bs_xmit.c
示例9: rtl8723bs_free_xmit_priv
void rtl8723bs_free_xmit_priv(PADAPTER padapter)
{
PHAL_DATA_TYPE phal;
struct xmit_priv *pxmitpriv;
struct xmit_buf *pxmitbuf;
_queue *pqueue;
_list *plist, *phead;
_list tmplist;
_irqL irql;
phal = GET_HAL_DATA(padapter);
pxmitpriv = &padapter->xmitpriv;
pqueue = &pxmitpriv->pending_xmitbuf_queue;
phead = get_list_head(pqueue);
INIT_LIST_HEAD(&tmplist);
spin_lock_bh(&pqueue->lock);
if (!list_empty(&pqueue->queue))
{
// Insert tmplist to end of queue, and delete phead
// then tmplist become head of queue.
list_add_tail(&tmplist, phead);
list_del_init(phead);
}
spin_unlock_bh(&pqueue->lock);
phead = &tmplist;
while (list_empty(phead) == false)
{
plist = get_next(phead);
list_del_init(plist);
pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list);
rtw_free_xmitframe(pxmitpriv, (struct xmit_frame*)pxmitbuf->priv_data);
pxmitbuf->priv_data = NULL;
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
}
}
开发者ID:tsj123，项目名称:androidx86_remix，代码行数:39，代码来源:rtl8723bs_xmit.c
示例10: rtl8723bs_free_xmit_priv
void rtl8723bs_free_xmit_priv(struct adapter *padapter)
{
struct hal_com_data *phal;
struct xmit_priv *pxmitpriv;
struct xmit_buf *pxmitbuf;
struct __queue *pqueue;
struct list_head *plist, *phead;
struct list_head tmplist;
phal = GET_HAL_DATA(padapter);
pxmitpriv = &padapter->xmitpriv;
pqueue = &pxmitpriv->pending_xmitbuf_queue;
phead = get_list_head(pqueue);
INIT_LIST_HEAD(&tmplist);
critical_enter_bh(&pqueue->lock);
if (!list_empty(&pqueue->queue))
{
/* Insert tmplist to end of queue, and delete phead */
/* then tmplist become head of queue. */
list_add_tail(&tmplist, phead);
list_del_init(phead);
}
critical_exit_bh(&pqueue->lock);
phead = &tmplist;
while (list_empty(phead) == false)
{
plist = get_next(phead);
list_del_init(plist);
pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list);
rtw_free_xmitframe(pxmitpriv, (struct xmit_frame*)pxmitbuf->priv_data);
pxmitbuf->priv_data = NULL;
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
}
}
开发者ID:yaozhiman，项目名称:rtl8723bs，代码行数:38，代码来源:rtl8723bs_xmit.c
示例11: rtw_dump_xframe
void rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe)
{
_irqL irqL;
int t, sz, w_sz, pull=0;
//u8 *mem_addr;
u32 ff_hwaddr;
struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv;
struct security_priv *psecuritypriv = &padapter->securitypriv;
struct tx_desc *ptxdesc;
if ((pxmitframe->frame_tag == DATA_FRAMETAG) &&
(pxmitframe->attrib.ether_type != 0x0806) &&
(pxmitframe->attrib.ether_type != 0x888e) &&
(pxmitframe->attrib.dhcp_pkt != 1))
{
rtw_issue_addbareq_cmd(padapter, pxmitframe);
}
//mem_addr = pxmitframe->buf_addr;
RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_dump_xframe()\n"));
for (t = 0; t < pattrib->nr_frags; t++)
{
if (t != (pattrib->nr_frags - 1))
{
RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("pattrib->nr_frags=%d\n", pattrib->nr_frags));
sz = pxmitpriv->frag_len;
sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len);
}
else //no frag
{
sz = pattrib->last_txcmdsz;
}
ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe);
#ifdef CONFIG_CONCURRENT_MODE
if(!rtw_buddy_adapter_up(padapter))
goto skip_if2_tx;
if(padapter->adapter_type > PRIMARY_ADAPTER)
{
_adapter *pri_adapter = padapter->pbuddy_adapter;
struct dvobj_priv *pri_dvobjpriv = &pri_adapter->dvobjpriv;
_enter_critical(&(pri_dvobjpriv->irq_th_lock), &irqL);
ptxdesc = get_txdesc(pri_adapter, ff_hwaddr);
if(ptxdesc == NULL)
{
_exit_critical(&pri_dvobjpriv->irq_th_lock, &irqL);
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
DBG_8192C("##### Tx desc unavailable !#####\n");
break;
}
update_txdesc(pxmitframe, (uint*)ptxdesc, sz);
rtl8192ce_enqueue_xmitbuf(&(pri_adapter->xmitpriv.tx_ring[ff_hwaddr]), pxmitbuf);
pxmitbuf->len = sz;
w_sz = sz;
wmb();
ptxdesc->txdw0 |= cpu_to_le32(OWN);
_exit_critical(&pri_dvobjpriv->irq_th_lock, &irqL);
rtw_write16(pri_adapter, REG_PCIE_CTRL_REG, ffaddr2dma(ff_hwaddr));
rtw_write_port(padapter, ff_hwaddr, w_sz, (unsigned char*)pxmitbuf);
} else
skip_if2_tx:
#endif
{
_enter_critical(&pdvobjpriv->irq_th_lock, &irqL);
ptxdesc = get_txdesc(pxmitframe->padapter, ff_hwaddr);
if(ptxdesc == NULL)
{
_exit_critical(&pdvobjpriv->irq_th_lock, &irqL);
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
DBG_8192C("##### Tx desc unavailable !#####\n");
break;
}
update_txdesc(pxmitframe, (uint*)ptxdesc, sz);
rtl8192ce_enqueue_xmitbuf(&pxmitpriv->tx_ring[ff_hwaddr], pxmitbuf);
pxmitbuf->len = sz;
w_sz = sz;
//.........这里部分代码省略.........
开发者ID:develersrl，项目名称:winmate-kernel，代码行数:101，代码来源:rtl8192ce_xmit.c
示例12: rtl8188es_dequeue_writeport
//.........这里部分代码省略.........
u32 polling_num = 0;
#endif
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->adapter_type > 0)
pri_padapter = padapter->pbuddy_adapter;
if(rtw_buddy_adapter_up(padapter))
ret = check_buddy_fwstate( padapter, _FW_UNDER_SURVEY);
#endif
ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);
if (_TRUE == ret)
pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
else
pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL) {
return _TRUE;
}
deviceId = ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr);
// translate fifo addr to queue index
switch (deviceId) {
case WLAN_TX_HIQ_DEVICE_ID:
PageIdx = HI_QUEUE_IDX;
break;
case WLAN_TX_MIQ_DEVICE_ID:
PageIdx = MID_QUEUE_IDX;
break;
case WLAN_TX_LOQ_DEVICE_ID:
PageIdx = LOW_QUEUE_IDX;
break;
}
query_free_page:
// check if hardware tx fifo page is enough
if( _FALSE == rtw_hal_sdio_query_tx_freepage(pri_padapter, PageIdx, pxmitbuf->pg_num))
{
#ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT
if (!bUpdatePageNum) {
// Total number of page is NOT available, so update current FIFO status
HalQueryTxBufferStatus8189ESdio(padapter);
bUpdatePageNum = _TRUE;
goto query_free_page;
} else {
bUpdatePageNum = _FALSE;
enqueue_pending_xmitbuf_to_head(pxmitpriv, pxmitbuf);
return _TRUE;
}
#else //CONFIG_SDIO_TX_ENABLE_AVAL_INT
polling_num++;
if ((polling_num % 60) == 0) {//or 80
//DBG_871X("%s: FIFO starvation!(%d) len=%d agg=%d page=(R)%d(A)%d\n",
// __func__, n, pxmitbuf->len, pxmitbuf->agg_num, pframe->pg_num, freePage[PageIdx] + freePage[PUBLIC_QUEUE_IDX]);
rtw_msleep_os(1);
}
// Total number of page is NOT available, so update current FIFO status
HalQueryTxBufferStatus8189ESdio(padapter);
goto query_free_page;
#endif //CONFIG_SDIO_TX_ENABLE_AVAL_INT
}
if ((padapter->bSurpriseRemoved == _TRUE)
|| (padapter->bDriverStopped == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
||((padapter->pbuddy_adapter)
&& ((padapter->pbuddy_adapter->bSurpriseRemoved) ||(padapter->pbuddy_adapter->bDriverStopped)))
#endif
){
RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
goto free_xmitbuf;
}
if (rtw_sdio_wait_enough_TxOQT_space(padapter, pxmitbuf->agg_num) == _FALSE)
{
goto free_xmitbuf;
}
rtw_write_port(padapter, deviceId, pxmitbuf->len, (u8 *)pxmitbuf);
rtw_hal_sdio_update_tx_freepage(pri_padapter, PageIdx, pxmitbuf->pg_num);
free_xmitbuf:
//rtw_free_xmitframe(pxmitpriv, pframe);
//pxmitbuf->priv_data = NULL;
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
#ifdef CONFIG_SDIO_TX_TASKLET
tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
#endif
return _FAIL;
}
开发者ID:alex-deng，项目名称:a33_linux，代码行数:101，代码来源:rtl8189es_xmit.c
示例13: rtl8188eu_xmitframe_complete
s32 rtl8188eu_xmitframe_complete(struct adapter *adapt, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
{
struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
struct xmit_frame *pxmitframe = NULL;
struct xmit_frame *pfirstframe = NULL;
/* aggregate variable */
struct hw_xmit *phwxmit;
struct sta_info *psta = NULL;
struct tx_servq *ptxservq = NULL;
struct list_head *xmitframe_plist = NULL, *xmitframe_phead = NULL;
u32 pbuf; /* next pkt address */
u32 pbuf_tail; /* last pkt tail */
u32 len; /* packet length, except TXDESC_SIZE and PKT_OFFSET */
u32 bulksize = haldata->UsbBulkOutSize;
u8 desc_cnt;
u32 bulkptr;
/* dump frame variable */
u32 ff_hwaddr;
RT_TRACE(_module_rtl8192c_xmit_c_, _drv_info_, ("+xmitframe_complete\n"));
/* check xmitbuffer is ok */
if (pxmitbuf == NULL) {
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL)
return false;
}
/* 3 1. pick up first frame */
do {
rtw_free_xmitframe(pxmitpriv, pxmitframe);
pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
if (pxmitframe == NULL) {
/* no more xmit frame, release xmit buffer */
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
return false;
}
pxmitframe->pxmitbuf = pxmitbuf;
pxmitframe->buf_addr = pxmitbuf->pbuf;
pxmitbuf->priv_data = pxmitframe;
pxmitframe->agg_num = 1; /* alloc xmitframe should assign to 1. */
pxmitframe->pkt_offset = 1; /* first frame of aggregation, reserve offset */
rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe);
/* always return ndis_packet after rtw_xmitframe_coalesce */
rtw_os_xmit_complete(adapt, pxmitframe);
break;
} while (1);
/* 3 2. aggregate same priority and same DA(AP or STA) frames */
pfirstframe = pxmitframe;
len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE + (pfirstframe->pkt_offset*PACKET_OFFSET_SZ);
pbuf_tail = len;
pbuf = round_up(pbuf_tail, 8);
/* check pkt amount in one bulk */
desc_cnt = 0;
bulkptr = bulksize;
if (pbuf < bulkptr) {
desc_cnt++;
} else {
desc_cnt = 0;
bulkptr = ((pbuf / bulksize) + 1) * bulksize; /* round to next bulksize */
}
/* dequeue same priority packet from station tx queue */
psta = pfirstframe->attrib.psta;
switch (pfirstframe->attrib.priority) {
case 1:
case 2:
ptxservq = &(psta->sta_xmitpriv.bk_q);
phwxmit = pxmitpriv->hwxmits + 3;
break;
case 4:
case 5:
ptxservq = &(psta->sta_xmitpriv.vi_q);
phwxmit = pxmitpriv->hwxmits + 1;
break;
case 6:
case 7:
ptxservq = &(psta->sta_xmitpriv.vo_q);
phwxmit = pxmitpriv->hwxmits;
break;
case 0:
case 3:
default:
ptxservq = &(psta->sta_xmitpriv.be_q);
phwxmit = pxmitpriv->hwxmits + 2;
break;
}
//.........这里部分代码省略.........
开发者ID:3null，项目名称:linux，代码行数:101，代码来源:rtl8188eu_xmit.c
示例14: rtl8192cu_xmitframe_complete
s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct xmit_frame *pxmitframe = NULL;
struct xmit_frame *pfirstframe = NULL;
// aggregate variable
struct hw_xmit *phwxmit;
struct sta_info *psta = NULL;
struct tx_servq *ptxservq = NULL;
_irqL irqL;
_list *xmitframe_plist = NULL, *xmitframe_phead = NULL;
u32 pbuf; // next pkt address
u32 pbuf_tail; // last pkt tail
u32 len; // packet length, except TXDESC_SIZE and PKT_OFFSET
u32 bulkSize = pHalData->UsbBulkOutSize;
u8 descCount;
u32 bulkPtr;
// dump frame variable
u32 ff_hwaddr;
#ifndef IDEA_CONDITION
int res = _SUCCESS;
#endif
RT_TRACE(_module_rtl8192c_xmit_c_, _drv_info_, ("+xmitframe_complete\n"));
// check xmitbuffer is ok
if (pxmitbuf == NULL) {
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL) return _FALSE;
}
//3 1. pick up first frame
do {
rtw_free_xmitframe(pxmitpriv, pxmitframe);
pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
if (pxmitframe == NULL) {
// no more xmit frame, release xmit buffer
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
return _FALSE;
}
#ifndef IDEA_CONDITION
if (pxmitframe->frame_tag != DATA_FRAMETAG) {
RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_,
("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n",
pxmitframe->frame_tag, DATA_FRAMETAG));
// rtw_free_xmitframe(pxmitpriv, pxmitframe);
continue;
}
// TID 0~15
if ((pxmitframe->attrib.priority < 0) ||
(pxmitframe->attrib.priority > 15)) {
RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_,
("xmitframe_complete: TID(%d) should be 0~15!\n",
pxmitframe->attrib.priority));
// rtw_free_xmitframe(pxmitpriv, pxmitframe);
continue;
}
#endif
pxmitframe->pxmitbuf = pxmitbuf;
pxmitframe->buf_addr = pxmitbuf->pbuf;
pxmitbuf->priv_data = pxmitframe;
//pxmitframe->agg_num = 1; // alloc xmitframe should assign to 1.
pxmitframe->pkt_offset = 1; // first frame of aggregation, reserve offset
#ifdef IDEA_CONDITION
rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe);
#else
res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe);
if (res == _FALSE) {
// rtw_free_xmitframe(pxmitpriv, pxmitframe);
continue;
}
#endif
// always return ndis_packet after rtw_xmitframe_coalesce
rtw_os_xmit_complete(padapter, pxmitframe);
break;
} while (1);
//3 2. aggregate same priority and same DA(AP or STA) frames
pfirstframe = pxmitframe;
len = xmitframe_need_length(pfirstframe) + TXDESC_OFFSET;
pbuf_tail = len;
pbuf = _RND8(pbuf_tail);
//.........这里部分代码省略.........
开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:101，代码来源:rtl8192cu_xmit.c
示例15: usb_write_port
//.........这里部分代码省略.........
goto exit;
}
SPIN_LOCK_IRQ(pxmitpriv->lock, &irqL);
switch(addr) {
case VO_QUEUE_INX:
pxmitpriv->voq_cnt++;
pxmitbuf->flags = VO_QUEUE_INX;
break;
case VI_QUEUE_INX:
pxmitpriv->viq_cnt++;
pxmitbuf->flags = VI_QUEUE_INX;
break;
case BE_QUEUE_INX:
pxmitpriv->beq_cnt++;
pxmitbuf->flags = BE_QUEUE_INX;
break;
case BK_QUEUE_INX:
pxmitpriv->bkq_cnt++;
pxmitbuf->flags = BK_QUEUE_INX;
break;
case HIGH_QUEUE_INX:
pxmitbuf->flags = HIGH_QUEUE_INX;
break;
default:
pxmitbuf->flags = MGT_QUEUE_INX;
break;
}
SPIN_UNLOCK_IRQ(pxmitpriv->lock, &irqL);
purb = pxmitbuf->pxmit_urb[0];
//translate DMA FIFO addr to pipehandle
pipe = ffaddr2pipehdl(pdvobj, addr);
#ifdef CONFIG_REDUCE_USB_TX_INT
if ( (pxmitpriv->free_xmitbuf_cnt%NR_XMITBUFF == 0)
|| (pxmitbuf->buf_tag > XMITBUF_DATA) )
{
purb->transfer_flags &= (~URB_NO_INTERRUPT);
} else {
purb->transfer_flags |= URB_NO_INTERRUPT;
//DBG_8192C("URB_NO_INTERRUPT ");
}
#endif
usb_fill_bulk_urb(purb, pusbd, pipe,
pxmitframe->buf_addr, //= pxmitbuf->pbuf
cnt,
usb_write_port_complete,
pxmitbuf);//context is pxmitbuf
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX
purb->transfer_dma = pxmitbuf->dma_transfer_addr;
purb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
purb->transfer_flags |= URB_ZERO_PACKET;
#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX
#ifdef USB_PACKET_OFFSET_SZ
#if (USB_PACKET_OFFSET_SZ == 0)
purb->transfer_flags |= URB_ZERO_PACKET;
#endif
#endif
status = usb_submit_urb(purb, GFP_ATOMIC);
if (!status) {
#ifdef DBG_CONFIG_ERROR_DETECT
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
pHalData->srestpriv.last_tx_time = rtw_get_current_time();
}
#endif
} else {
rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_WRITE_PORT_ERR);
DBG_871X("usb_write_port, status=%d\n", status);
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port(): usb_submit_urb, status=%x\n", status));
switch (status) {
case -ENODEV:
padapter->bDriverStopped=_TRUE;
break;
default:
break;
}
goto exit;
}
ret= _SUCCESS;
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("-usb_write_port\n"));
exit:
if (ret != _SUCCESS)
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
return ret;
}
开发者ID:dosgo，项目名称:rtl8723bu，代码行数:101，代码来源:usb_ops_linux.c
示例16: rtl8723_dequeue_writeport
static s32 rtl8723_dequeue_writeport(PADAPTER padapter)
{
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
struct xmit_buf *pxmitbuf;
PADAPTER pri_padapter = padapter;
u32 deviceId;
u32 requiredPage;
u8 PageIdx=0;
u8 *freePage;
_irqL irql;
u32 n;
s32 ret = 0;
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->adapter_type > 0)
pri_padapter = padapter->pbuddy_adapter;
if (rtw_buddy_adapter_up(padapter))
ret = check_buddy_fwstate(padapter, _FW_UNDER_SURVEY);
#endif
ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);
if (_TRUE == ret)
pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
else
pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL)
return _TRUE;
query_free_page:
// check if hardware tx fifo page is enough
if( _FALSE == rtl8723bs_query_tx_freepage(pri_padapter, pxmitbuf))
{
rtw_msleep_os(1);
goto query_free_page;
}
if ((padapter->bSurpriseRemoved == _TRUE)
|| (padapter->bDriverStopped == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
||((padapter->pbuddy_adapter)
&& ((padapter->pbuddy_adapter->bSurpriseRemoved) ||(padapter->pbuddy_adapter->bDriverStopped)))
#endif
) {
RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
goto free_xmitbuf;
}
#ifdef CONFIG_CHECK_LEAVE_LPS
traffic_check_for_leave_lps(padapter, _TRUE, pxmitbuf->agg_num);
#endif
rtw_write_port(padapter, ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr), pxmitbuf->len, (u8 *)pxmitbuf);
free_xmitbuf:
//rtw_free_xmitframe(pxmitpriv, pframe);
//pxmitbuf->priv_data = NULL;
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
#if 0 // improve TX/RX throughput balance
{
PSDIO_DATA psdio;
struct sdio_func *func;
static u8 i = 0;
u32 sdio_hisr;
u8 j;
psdio = &adapter_to_dvobj(padapter)->intf_data;
func = psdio->func;
if (i == 2)
{
j = 0;
while (j < 10)
{
sdio_hisr = SdioLocalCmd52Read1Byte(padapter, SDIO_REG_HISR);
sdio_hisr &= GET_HAL_DATA(padapter)->sdio_himr;
if (sdio_hisr & SDIO_HISR_RX_REQUEST)
{
sdio_claim_host(func);
sd_int_hdl(pri_padapter);
sdio_release_host(func);
}
else
{
break;
}
j++;
}
i = 0;
}
else
//.........这里部分代码省略.........
开发者ID:avila-devlogic，项目名称:D33_KK_Kernel，代码行数:101，代码来源:rtl8723bs_xmit.c
示例17: xmit_xmitframes
//.........这里部分代码省略.........
frame_phead = get_list_head(pframe_queue);
while (rtw_is_list_empty(frame_phead) == _FALSE)
{
frame_plist = get_next(frame_phead);
pxmitframe = LIST_CONTAINOR(frame_plist, struct xmit_frame, list);
// check xmit_buf size enough or not
txlen = txdesc_size + rtw_wlan_pkt_size(pxmitframe);
if ((NULL == pxmitbuf) ||
((pxmitbuf->ptail + txlen) > pxmitbuf->pend)
#ifdef SDIO_TX_AGG_MAX
|| (k >= SDIO_TX_AGG_MAX)
#endif
)
{
if (pxmitbuf)
{
//pxmitbuf->priv_data will be NULL, and will crash here
if (pxmitbuf->len > 0 && pxmitbuf->priv_data)
{
struct xmit_frame *pframe;
pframe = (struct xmit_frame*)pxmitbuf->priv_data;
pframe->agg_num = k;
pxmitbuf->agg_num = k;
rtl8723b_update_txdesc(pframe, pframe->buf_addr);
rtw_free_xmitframe(pxmitpriv, pframe);
pxmitbuf->priv_data = NULL;
enqueue_pending_xmitbuf(pxmitpriv, pxmitbuf);
//can not yield under lock
//rtw_yield_os();
} else {
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
}
}
pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
if (pxmitbuf == NULL) {
#ifdef DBG_XMIT_BUF
DBG_871X_LEVEL(_drv_err_, "%s: xmit_buf is not enough!\n", __FUNCTION__);
#endif
err = -2;
break;
}
k = 0;
}
// ok to send, remove frame from queue
#ifdef CONFIG_AP_MODE
if (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE) {
if ((pxmitframe->attrib.psta->state & WIFI_SLEEP_STATE) &&
(pxmitframe->attrib.triggered == 0)) {
DBG_871X("%s: one not triggered pkt in queue when this STA sleep,"
" break and goto next sta\n", __func__);
break;
}
}
#endif
rtw_list_delete(&pxmitframe->list);
ptxservq->qcnt--;
phwxmit->accnt--;
if (k == 0) {
pxmitbuf->ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe);
pxmitbuf->priv_data = (u8*)pxmitframe;
开发者ID:avila-devlogic，项目名称:D33_KK_Kernel，代码行数:67，代码来源:rtl8723bs_xmit.c
示例18: usb_write_port_complete
static void usb_write_port_complete(struct urb *purb, struct pt_regs *regs)
{
_irqL irqL;
int i;
struct xmit_buf *pxmitbuf = (struct xmit_buf *)purb->context;
_adapter *padapter = pxmitbuf->padapter;
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
switch(pxmitbuf->flags) {
case VO_QUEUE_INX:
pxmitpriv->voq_cnt--;
break;
case VI_QUEUE_INX:
pxmitpriv->viq_cnt--;
break;
case BE_QUEUE_INX:
pxmitpriv->beq_cnt--;
break;
case BK_QUEUE_INX:
pxmitpriv->bkq_cnt--;
break;
default:
break;
}
if (RTW_CANNOT_TX(padapter)) {
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));
DBG_8192C("%s(): TX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) pxmitbuf->buf_tag(%x) \n",
__FUNCTION__,padapter->bDriverStopped, padapter->bSurpriseRemoved,pxmitbuf->buf_tag);
goto check_completion;
}
if (purb->status==0) {
} else {
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete : purb->status(%d) != 0 \n", purb->status));
DBG_871X("###=> urb_write_port_complete status(%d)\n",purb->status);
if((purb->status==-EPIPE)||(purb->status==-EPROTO))
{
sreset_set_wifi_error_status(padapter, USB_WRITE_PORT_FAIL);
} else if (purb->status == -EINPROGRESS) {
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: EINPROGESS\n"));
goto check_completion;
} else if (purb->status == -ENOENT) {
DBG_871X("%s: -ENOENT\n", __func__);
goto check_completion;
} else if (purb->status == -ECONNRESET) {
DBG_871X("%s: -ECONNRESET\n", __func__);
goto check_completion;
} else if (purb->status == -ESHUTDOWN) {
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: ESHUTDOWN\n"));
padapter->bDriverStopped=_TRUE;
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped=TRUE\n"));
goto check_completion;
}
else
{
padapter->bSurpriseRemoved=_TRUE;
DBG_8192C("bSurpriseRemoved=TRUE\n");
RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bSurpriseRemoved=TRUE\n"));
goto check_completion;
}
}
#ifdef DBG_CONFIG_ERROR_DETECT
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
pHalData->srestpriv.last_tx_complete_time = rtw_get_current_time();
}
#endif
check_completion:
SPIN_LOCK_IRQ(pxmitpriv->lock_sctx, &irqL);
rtw_sctx_done_err(&pxmitbuf->sctx,
purb->status ? RTW_SCTX_DONE_WRITE_PORT_ERR : RTW_SCTX_DONE_SUCCESS);
SPIN_UNLOCK_IRQ(pxmitpriv->lock_sctx, &irqL);
rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
}
开发者ID:dosgo，项目名称:rtl8723bu，代码行数:88，代码来源:usb_ops_linux.c
示例19: usb_write_port_complete
//.........这里部分代码省略.........
switch(pattrib->priority)
{
case 1:
case 2:
pxmitpriv->bkq_cnt--;
break;
case 4:
case 5:
pxmitpriv->viq_cnt--;
break;
case 6:
case 7:
pxmitpriv->voq_cnt--;
break;
case 0:
case 3:
default:
pxmitpriv->beq_cnt--;
break;
}
_exit_critical(&pxmitpriv->lock, &irqL);
if(pxmitpriv->txirp_cnt==0)
{
_rtw_up_sema(&(pxmitpriv->tx_retevt));
}
*/
/* rtw_free_xmitframe(pxmitpriv, pxmitframe); */
if (RTW_CANNOT_TX(padapter)) {
RTW_INFO("%s(): TX Warning! bDriverStopped(%s) OR bSurpriseRemoved(%s) pxmitbuf->buf_tag(%x)\n"
, __func__
, rtw_is_drv_stopped(padapter) ? "True" : "False"
, rtw_is_surprise_removed(padapter) ? "True" : "False"
, pxmitbuf->buf_tag);
goto check_completion;
}
if (purb->status == 0) {
} else {
RTW_INFO("###=> urb_write_port_complete status(%d)\n", purb->status);
if ((purb->status == -EPIPE) || (purb->status == -EPROTO)) {
/* usb_clear_halt(pusbdev, purb->pipe); */
/* msleep(10); */
sreset_set_wifi_error_status(padapter, USB_WRITE_PORT_FAIL);
} else if (purb->status == -EINPROGRESS) {
goto check_completion;
} else if (purb->status == -ENOENT) {
RTW_INFO("%s: -ENOENT\n", __func__);
goto check_completion;
} else if (purb->status == -ECONNRESET) {
RTW_INFO("%s: -ECONNRESET\n", __func__);
goto check_completion;
} else if (purb->status == -ESHUTDOWN) {
rtw_set_drv_stopped(padapter);
goto check_completion;
} else {
rtw_set_surprise_removed(padapter);
RTW_INFO("bSurpriseRemoved=TRUE\n");
goto check_completion;
}
}
#ifdef DBG_CONFIG_ERROR_DETECT
{
HAL_DATA_TYPE *pHalData = G
|
客服电话
APP下载
官方微信
请发表评论