C++ rtw_led_control函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtw_led_control函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_led_control函数的具体用法？C++ rtw_led_control怎么用？C++ rtw_led_control使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtw_led_control函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtw_createbss_cmd

u8 rtw_createbss_cmd(struct adapter  *padapter)
{
	struct cmd_obj *pcmd;
	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct wlan_bssid_ex *pdev_network = &padapter->registrypriv.dev_network;
	u8	res = _SUCCESS;


	rtw_led_control(padapter, LED_CTL_START_TO_LINK);

	if (pmlmepriv->assoc_ssid.SsidLength == 0)
		RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, (" createbss for Any SSid:%s\n", pmlmepriv->assoc_ssid.Ssid));
	else
		RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, (" createbss for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid));

	pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
	if (pcmd == NULL) {
		res = _FAIL;
		goto exit;
	}

	INIT_LIST_HEAD(&pcmd->list);
	pcmd->cmdcode = _CreateBss_CMD_;
	pcmd->parmbuf = (unsigned char *)pdev_network;
	pcmd->cmdsz = get_wlan_bssid_ex_sz((struct wlan_bssid_ex *)pdev_network);
	pcmd->rsp = NULL;
	pcmd->rspsz = 0;
	pdev_network->Length = pcmd->cmdsz;
	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
exit:


	return res;
}

开发者ID:020gzh，项目名称:linux，代码行数:35，代码来源:rtw_cmd.c

示例2: rtw_hw_suspend23a

int rtw_hw_suspend23a(struct rtw_adapter *padapter)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct net_device *pnetdev = padapter->pnetdev;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;

	if ((!padapter->bup) || (padapter->bDriverStopped) ||
	    (padapter->bSurpriseRemoved)) {
		DBG_8723A("padapter->bup =%d bDriverStopped =%d bSurpriseRemoved = %d\n",
			  padapter->bup, padapter->bDriverStopped,
			  padapter->bSurpriseRemoved);
		goto error_exit;
	}

	if (padapter) { /* system suspend */
		LeaveAllPowerSaveMode23a(padapter);

		DBG_8723A("==> rtw_hw_suspend23a\n");
		down(&pwrpriv->lock);
		pwrpriv->bips_processing = true;
		/* padapter->net_closed = true; */
		/* s1. */
		if (pnetdev) {
			netif_carrier_off(pnetdev);
			netif_tx_stop_all_queues(pnetdev);
		}

		/* s2. */
		rtw_disassoc_cmd23a(padapter, 500, false);

		/* s2-2.  indicate disconnect to os */
		/* rtw_indicate_disconnect23a(padapter); */
		if (check_fwstate(pmlmepriv, _FW_LINKED)) {
			_clr_fwstate_(pmlmepriv, _FW_LINKED);

			rtw_led_control(padapter, LED_CTL_NO_LINK);

			rtw_os_indicate_disconnect23a(padapter);

			/* donnot enqueue cmd */
			rtw_lps_ctrl_wk_cmd23a(padapter,
					       LPS_CTRL_DISCONNECT, 0);
		}
		/* s2-3. */
		rtw_free_assoc_resources23a(padapter, 1);

		/* s2-4. */
		rtw_free_network_queue23a(padapter);
		rtw_ips_dev_unload23a(padapter);
		pwrpriv->rf_pwrstate = rf_off;
		pwrpriv->bips_processing = false;
		up(&pwrpriv->lock);
	} else {
		goto error_exit;
	}
	return 0;
error_exit:
	DBG_8723A("%s, failed\n", __func__);
	return -1;
}

开发者ID:3null，项目名称:linux，代码行数:60，代码来源:usb_intf.c

示例3: rtw_hal_deinit

uint rtw_hal_deinit(_adapter *padapter)
{
	uint	status = _SUCCESS;
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
	int i;
_func_enter_;

	status = padapter->HalFunc.hal_deinit(padapter);

	if(status == _SUCCESS){
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
		for (i = 0; i<dvobj->iface_nums; i++) {
			padapter = dvobj->padapters[i];
			padapter->hw_init_completed = _FALSE;
		}
	}
	else
	{
		DBG_871X("\n rtw_hal_deinit: hal_init fail\n");
	}

_func_exit_;
	
	return status;
}

开发者ID:austinmarton，项目名称:rtl8812au_linux，代码行数:25，代码来源:hal_intf.c

示例4: rtw_hal_init

uint	 rtw_hal_init(_adapter *padapter) 
{
	uint	status = _SUCCESS;

#ifdef CONFIG_DUALMAC_CONCURRENT
	if(padapter->hw_init_completed == _TRUE)
	{
		DBG_871X("rtw_hal_init: hw_init_completed == _TRUE\n");
		return status;
	}

	// before init mac0, driver must init mac1 first to avoid usb rx error.
	if((padapter->pbuddy_adapter != NULL) && (padapter->DualMacConcurrent == _TRUE)
		&& (padapter->adapter_type == PRIMARY_ADAPTER))
	{
		if(padapter->pbuddy_adapter->hw_init_completed == _TRUE)
		{
			DBG_871X("rtw_hal_init: pbuddy_adapter hw_init_completed == _TRUE\n");
		}
		else
		{
			status = 	padapter->HalFunc.hal_init(padapter->pbuddy_adapter);
			if(status == _SUCCESS){
				padapter->pbuddy_adapter->hw_init_completed = _TRUE;
			}
			else{
			 	padapter->pbuddy_adapter->hw_init_completed = _FALSE;
				RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail(pbuddy_adapter)\n"));
				DBG_871X("rtw_hal_init: hal__init fail(pbuddy_adapter)\n");
				return status;
			}
		}
	}
#endif

	padapter->hw_init_completed=_FALSE;

	status = padapter->HalFunc.hal_init(padapter);

	if(status == _SUCCESS){
		padapter->hw_init_completed = _TRUE;
			
		if (padapter->registrypriv.notch_filter == 1)
			rtw_hal_notch_filter(padapter, 1);

		rtw_hal_reset_security_engine(padapter);

		rtw_led_control(padapter, LED_CTL_POWER_ON);
	}
	else{
	 	padapter->hw_init_completed = _FALSE;
		DBG_871X("rtw_hal_init: hal__init fail\n");
	}

	RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status));

	return status;

}

开发者ID:Alex-van-der-Peet，项目名称:rtl8812AU_8821AU_linux，代码行数:59，代码来源:hal_intf.c

示例5: netdev_close

//extern int rfpwrstate_check(_adapter *padapter);
static int netdev_close(struct net_device *pnetdev)
{
	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);

	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - drv_close\n"));	

	if(padapter->pwrctrlpriv.bInternalAutoSuspend == _TRUE)
	{
		//rfpwrstate_check(padapter);
		if(padapter->pwrctrlpriv.rf_pwrstate == rf_off)
			padapter->pwrctrlpriv.ps_flag = _TRUE;
	}
	padapter->net_closed = _TRUE;

/*	if(!padapter->hw_init_completed)
	{
		DBG_8192C("(1)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed);

		padapter->bDriverStopped = _TRUE;

		rtw_dev_unload(padapter);
	}
	else*/
	if(padapter->pwrctrlpriv.rf_pwrstate == rf_on){
		DBG_8192C("(2)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed);

		//s1.
		if(pnetdev)   
     		{
			if (!netif_queue_stopped(pnetdev))
				netif_stop_queue(pnetdev);
     		}

#ifndef CONFIG_ANDROID
		//s2.	
		//s2-1.  issue rtw_disassoc_cmd to fw
		rtw_disassoc_cmd(padapter);	
		//s2-2.  indicate disconnect to os
		rtw_indicate_disconnect(padapter);
		//s2-3. 
		rtw_free_assoc_resources(padapter);
		//s2-4.
		rtw_free_network_queue(padapter,_TRUE);
#endif
		// Close LED
	rtw_led_control(padapter, LED_CTL_POWER_OFF);
	}

	RT_TRACE(_module_os_intfs_c_,_drv_info_,("-871x_drv - drv_close\n"));
	DBG_8192C("-871x_drv - drv_close, bup=%d\n", padapter->bup);
	   
	return 0;
	
}

开发者ID:kavinwang，项目名称:openpos，代码行数:55，代码来源:os_intfs.c

示例6: rtw_ips_pwr_down

void rtw_ips_pwr_down(struct adapter *padapter)
{
	u32 start_time = jiffies;
	DBG_88E("===> rtw_ips_pwr_down...................\n");

	padapter->net_closed = true;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_ips_dev_unload(padapter);
	DBG_88E("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time));
}

开发者ID:383530895，项目名称:linux，代码行数:12，代码来源:os_intfs.c

示例7: rtw_ips_pwr_up

int rtw_ips_pwr_up(_adapter *padapter)
{	
	int result;
	u32 start_time = rtw_get_current_time();
	DBG_8192C("===>  rtw_ips_pwr_up..............\n");
	rtw_reset_drv_sw(padapter);
	result = ips_netdrv_open(padapter);

	rtw_led_control(padapter, LED_CTL_NO_LINK);
	
 	DBG_8192C("<===  rtw_ips_pwr_up.............. in %dms\n", rtw_get_passing_time_ms(start_time));
	return result;

}

开发者ID:CoreTech-Development，项目名称:buildroot-linux-kernel-m3，代码行数:14，代码来源:os_intfs.c

示例8: rtw_ips_pwr_down

void rtw_ips_pwr_down(struct adapter *padapter)
{
	unsigned long start_time = jiffies;

	DBG_88E("===> rtw_ips_pwr_down...................\n");

	padapter->net_closed = true;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_ips_dev_unload(padapter);
	DBG_88E("<=== rtw_ips_pwr_down..................... in %dms\n",
		jiffies_to_msecs(jiffies - start_time));
}

开发者ID:a2hojsjsjs，项目名称:linux，代码行数:14，代码来源:os_intfs.c

示例9: rtw_ips_pwr_down

void rtw_ips_pwr_down(_adapter *padapter)
{
	u32 start_time = rtw_get_current_time();
	DBG_8192C("===> rtw_ips_pwr_down...................\n");

	padapter->bCardDisableWOHSM = _TRUE;
	padapter->net_closed = _TRUE;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);
	
	rtw_ips_dev_unload(padapter);
	padapter->bCardDisableWOHSM = _FALSE;
	DBG_8192C("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time));
}

开发者ID:CoreTech-Development，项目名称:buildroot-linux-kernel-m3，代码行数:14，代码来源:os_intfs.c

示例10: rtw_ips_pwr_down

void rtw_ips_pwr_down(struct adapter *padapter)
{
	u32 start_time = rtw_get_current_time();
	DBG_88E("===> rtw_ips_pwr_down...................\n");

	padapter->bCardDisableWOHSM = true;
	padapter->net_closed = true;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_ips_dev_unload(padapter);
	padapter->bCardDisableWOHSM = false;
	DBG_88E("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time));
}

开发者ID:marceleng，项目名称:linux，代码行数:14，代码来源:os_intfs.c

示例11: netdev_close

int netdev_close(struct net_device *pnetdev)
{
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(pnetdev);
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+88eu_drv - drv_close\n"));

	if (padapter->pwrctrlpriv.bInternalAutoSuspend) {
		if (padapter->pwrctrlpriv.rf_pwrstate == rf_off)
			padapter->pwrctrlpriv.ps_flag = true;
	}
	padapter->net_closed = true;

	if (padapter->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_88E("(2)88eu_drv - drv_close, bup =%d, hw_init_completed =%d\n",
			padapter->bup, padapter->hw_init_completed);

		/* s1. */
		if (pnetdev) {
			if (!rtw_netif_queue_stopped(pnetdev))
				rtw_netif_stop_queue(pnetdev);
		}

		/* s2. */
		LeaveAllPowerSaveMode(padapter);
		rtw_disassoc_cmd(padapter, 500, false);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect(padapter);
		/* s2-3. */
		rtw_free_assoc_resources(padapter, 1);
		/* s2-4. */
		rtw_free_network_queue(padapter, true);
		/*  Close LED */
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
	}

	nat25_db_cleanup(padapter);

#ifdef CONFIG_88EU_P2P
	rtw_p2p_enable(padapter, P2P_ROLE_DISABLE);
#endif /* CONFIG_88EU_P2P */

	kfree(dvobj->firmware.szFwBuffer);
	dvobj->firmware.szFwBuffer = NULL;

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-88eu_drv - drv_close\n"));
	DBG_88E("-88eu_drv - drv_close, bup =%d\n", padapter->bup);
	return 0;
}

开发者ID:arm13，项目名称:rtl8188eu，代码行数:49，代码来源:os_intfs.c

示例12: rtw_ips_pwr_up

int rtw_ips_pwr_up(struct adapter *padapter)
{
	int result;
	unsigned long start_time = jiffies;

	DBG_88E("===>  rtw_ips_pwr_up..............\n");
	rtw_reset_drv_sw(padapter);

	result = ips_netdrv_open(padapter);

	rtw_led_control(padapter, LED_CTL_NO_LINK);

	DBG_88E("<===  rtw_ips_pwr_up.............. in %dms\n",
		jiffies_to_msecs(jiffies - start_time));
	return result;
}

开发者ID:a2hojsjsjs，项目名称:linux，代码行数:16，代码来源:os_intfs.c

示例13: rtw_ips_pwr_down23a

void rtw_ips_pwr_down23a(struct rtw_adapter *padapter)
{
	unsigned long start_time = jiffies;

	DBG_8723A("===> rtw_ips_pwr_down23a...................\n");

	padapter->bCardDisableWOHSM = true;
	padapter->net_closed = true;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_ips_dev_unload23a(padapter);
	padapter->bCardDisableWOHSM = false;
	DBG_8723A("<=== rtw_ips_pwr_down23a..................... in %dms\n",
		  jiffies_to_msecs(jiffies - start_time));
}

开发者ID:abhinav90，项目名称:linux，代码行数:16，代码来源:os_intfs.c

示例14: netdev_close

int netdev_close(struct net_device *pnetdev)
{
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(pnetdev);
	struct hal_data_8188e *rtlhal = GET_HAL_DATA(padapter);

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+88eu_drv - drv_close\n"));

	if (padapter->pwrctrlpriv.bInternalAutoSuspend) {
		if (padapter->pwrctrlpriv.rf_pwrstate == rf_off)
			padapter->pwrctrlpriv.ps_flag = true;
	}
	padapter->net_closed = true;

	if (padapter->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_88E("(2)88eu_drv - drv_close, bup =%d, hw_init_completed =%d\n",
			padapter->bup, padapter->hw_init_completed);

		/* s1. */
		if (pnetdev) {
			if (!rtw_netif_queue_stopped(pnetdev))
				netif_tx_stop_all_queues(pnetdev);
		}

		/* s2. */
		LeaveAllPowerSaveMode(padapter);
		rtw_disassoc_cmd(padapter, 500, false);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect(padapter);
		/* s2-3. */
		rtw_free_assoc_resources(padapter, 1);
		/* s2-4. */
		rtw_free_network_queue(padapter, true);
		/*  Close LED */
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
	}

	kfree(rtlhal->pfirmware);
	rtlhal->pfirmware = NULL;

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-88eu_drv - drv_close\n"));
	DBG_88E("-88eu_drv - drv_close, bup =%d\n", padapter->bup);
	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:43，代码来源:os_intfs.c

示例15: rtw_hal_init

uint	 rtw_hal_init(_adapter *padapter) 
{
	uint	status = _SUCCESS;
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
	int i;

	status = padapter->HalFunc.hal_init(padapter);

	if(status == _SUCCESS){

		for (i = 0; i<dvobj->iface_nums; i++)
			dvobj->padapters[i]->hw_init_completed = _TRUE;
			
		if (padapter->registrypriv.notch_filter == 1)
			rtw_hal_notch_filter(padapter, 1);

		rtw_hal_reset_security_engine(padapter);

		for (i = 0; i<dvobj->iface_nums; i++)
			rtw_sec_restore_wep_key(dvobj->padapters[i]);

		rtw_led_control(padapter, LED_CTL_POWER_ON);

		init_hw_mlme_ext(padapter);

                rtw_hal_init_opmode(padapter);
		
#ifdef CONFIG_RF_GAIN_OFFSET
		rtw_bb_rf_gain_offset(padapter);
#endif //CONFIG_RF_GAIN_OFFSET

	}
	else{
		for (i = 0; i<dvobj->iface_nums; i++)
			dvobj->padapters[i]->hw_init_completed = _FALSE;
		DBG_871X("rtw_hal_init: hal__init fail\n");
	}

	RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status));

	return status;

}

开发者ID:rcd765，项目名称:rtl8723bs_intel_compute_stick，代码行数:43，代码来源:hal_intf.c

示例16: rtw_hal_deinit

uint rtw_hal_deinit(_adapter *padapter)
{
	uint	status = _SUCCESS;
	
_func_enter_;

	status = padapter->HalFunc.hal_deinit(padapter);

	if(status == _SUCCESS){
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
		padapter->hw_init_completed = _FALSE;
	}
	else
	{
		DBG_871X("\n rtw_hal_deinit: hal_init fail\n");
	}

_func_exit_;
	
	return status;
}

开发者ID:Alex-van-der-Peet，项目名称:rtl8812AU_8821AU_linux，代码行数:21，代码来源:hal_intf.c

示例17: netdev_close

static int netdev_close(struct net_device *pnetdev)
{
	struct rtw_adapter *padapter = netdev_priv(pnetdev);

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+871x_drv - drv_close\n"));

	padapter->net_closed = true;

	if (padapter->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_8723A("(2)871x_drv - drv_close, bup =%d, "
			  "hw_init_completed =%d\n", padapter->bup,
			  padapter->hw_init_completed);

		/* s1. */
		if (pnetdev) {
			if (!rtw_netif_queue_stopped(pnetdev))
				netif_tx_stop_all_queues(pnetdev);
		}

		/* s2. */
		LeaveAllPowerSaveMode23a(padapter);
		rtw_disassoc_cmd23a(padapter, 500, false);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect23a(padapter);
		/* s2-3. */
		rtw_free_assoc_resources23a(padapter, 1);
		/* s2-4. */
		rtw_free_network_queue23a(padapter);
		/*  Close LED */
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
	}

	rtw_scan_abort23a(padapter);

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-871x_drv - drv_close\n"));
	DBG_8723A("-871x_drv - drv_close, bup =%d\n", padapter->bup);

	return 0;
}

开发者ID:abhinav90，项目名称:linux，代码行数:39，代码来源:os_intfs.c

示例18: rtw_hal_deinit

uint rtw_hal_deinit(_adapter *padapter)
{
	uint	status = _SUCCESS;
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(padapter);
	int i;
_func_enter_;

	status = padapter->HalFunc.hal_deinit(padapter);

	if(status == _SUCCESS){
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
		pHalData->hw_init_completed = _FALSE;
	}
	else
	{
		DBG_871X("\n rtw_hal_deinit: hal_init fail\n");
	}

_func_exit_;
	
	return status;
}

开发者ID:ConiKost，项目名称:rtl88XXAU，代码行数:23，代码来源:hal_intf.c

示例19: rtw_gspi_suspend

static int rtw_gspi_suspend(struct spi_device *spi, pm_message_t mesg)
{
	struct dvobj_priv *dvobj = spi_get_drvdata(spi);
	PADAPTER padapter = dvobj->if1;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct net_device *pnetdev = padapter->pnetdev;
	int ret = 0;

	u32 start_time = rtw_get_current_time();

	_func_enter_;

	DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);

	pwrpriv->bInSuspend = _TRUE;

	while (pwrpriv->bips_processing == _TRUE)
		rtw_msleep_os(1);

	if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved))
	{
		DBG_871X("%s bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n", __FUNCTION__
			,padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved);
		goto exit;
	}

	rtw_cancel_all_timer(padapter);
	LeaveAllPowerSaveMode(padapter);

	//padapter->net_closed = _TRUE;
	//s1.
	if(pnetdev)
	{
		netif_carrier_off(pnetdev);
		rtw_netif_stop_queue(pnetdev);
	}
#ifdef CONFIG_WOWLAN
	padapter->pwrctrlpriv.bSupportRemoteWakeup=_TRUE;
#else
	//s2.
	//s2-1.  issue rtw_disassoc_cmd to fw
	disconnect_hdl(padapter, NULL);
	//rtw_disassoc_cmd(padapter);
#endif

#ifdef CONFIG_LAYER2_ROAMING_RESUME
	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) )
	{
		DBG_871X("%s %s(" MAC_FMT "), length:%d assoc_ssid.length:%d\n",__FUNCTION__,
				pmlmepriv->cur_network.network.Ssid.Ssid,
				MAC_ARG(pmlmepriv->cur_network.network.MacAddress),
				pmlmepriv->cur_network.network.Ssid.SsidLength,
				pmlmepriv->assoc_ssid.SsidLength);

		pmlmepriv->to_roaming = 1;
	}
#endif

	//s2-2.  indicate disconnect to os
	rtw_indicate_disconnect(padapter);
	//s2-3.
	rtw_free_assoc_resources(padapter, 1);

	//s2-4.
	rtw_free_network_queue(padapter, _TRUE);

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_dev_unload(padapter);

	if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
		rtw_indicate_scan_done(padapter, 1);

	if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING))
		rtw_indicate_disconnect(padapter);

	// interface deinit
	gspi_deinit(dvobj);
	RT_TRACE(_module_hci_intfs_c_, _drv_notice_, ("%s: deinit GSPI complete!\n", __FUNCTION__));

	rtw_wifi_gpio_wlan_ctrl(WLAN_PWDN_OFF);
	rtw_mdelay_os(1);
exit:
	DBG_871X("<===  %s return %d.............. in %dms\n", __FUNCTION__
		, ret, rtw_get_passing_time_ms(start_time));

	_func_exit_;
	return ret;
}

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:90，代码来源:gspi_intf.c

示例20: _netdev_open

int _netdev_open(struct net_device *pnetdev)
{
	uint status;	
	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;

	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - dev_open\n"));
	DBG_8192C("+871x_drv - drv_open, bup=%d\n", padapter->bup);

	if(pwrctrlpriv->ps_flag == _TRUE){
		padapter->net_closed = _FALSE;
		goto netdev_open_normal_process;
	}
		
	if(padapter->bup == _FALSE)
    	{    
		padapter->bDriverStopped = _FALSE;
	 	padapter->bSurpriseRemoved = _FALSE;	 
		padapter->bCardDisableWOHSM = _FALSE;        	
	
		status = rtw_hal_init(padapter);		
		if (status ==_FAIL)
		{			
			RT_TRACE(_module_os_intfs_c_,_drv_err_,("rtl871x_hal_init(): Can't init h/w!\n"));
			goto netdev_open_error;
		}
		
		DBG_8192C("MAC Address = "MAC_FMT"\n", MAC_ARG(pnetdev->dev_addr));

		
		status=rtw_start_drv_threads(padapter);
		if(status ==_FAIL)
		{			
			RT_TRACE(_module_os_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n"));			
			goto netdev_open_error;			
		}


		if (init_hw_mlme_ext(padapter) == _FAIL)
		{
			RT_TRACE(_module_os_intfs_c_,_drv_err_,("can't init mlme_ext_priv\n"));
			goto netdev_open_error;
		}


#ifdef CONFIG_DRVEXT_MODULE
		init_drvext(padapter);
#endif

		if(padapter->intf_start)
		{
			padapter->intf_start(padapter);
		}

#ifdef CONFIG_PROC_DEBUG
#ifndef RTK_DMP_PLATFORM
		rtw_proc_init_one(pnetdev);
#endif
#endif

#ifdef CONFIG_IOCTL_CFG80211
		rtw_cfg80211_init_wiphy(padapter);
#endif

		rtw_led_control(padapter, LED_CTL_NO_LINK);

		padapter->bup = _TRUE;
	}
	padapter->net_closed = _FALSE;

	_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000);

	if(( pwrctrlpriv->power_mgnt != PS_MODE_ACTIVE ) ||(padapter->pwrctrlpriv.bHWPwrPindetect))
	{
		padapter->pwrctrlpriv.bips_processing = _FALSE;	
		rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv);
 	}

	//netif_carrier_on(pnetdev);//call this func when rtw_joinbss_event_callback return success       
 	if(!netif_queue_stopped(pnetdev))
      		netif_start_queue(pnetdev);
	else
		netif_wake_queue(pnetdev);

#ifdef CONFIG_BR_EXT

#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
	rcu_read_lock();
#endif	// (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))

	//if(check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE)
	{
		//struct net_bridge	*br = pnetdev->br_port->br;//->dev->dev_addr;
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
		if (pnetdev->br_port) 
#else   // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
		if (rcu_dereference(padapter->pnetdev->rx_handler_data))
#endif  // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) 
		{
			struct net_device *br_netdev;
//.........这里部分代码省略.........

开发者ID:CoreTech-Development，项目名称:buildroot-linux-kernel-m3，代码行数:101，代码来源:os_intfs.c

注：本文中的rtw_led_control函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtw_list_delete函数代码示例发布时间：2022-05-30

C++ rtw_indicate_disconnect函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17957|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rtw_led_control函数代码示例

示例1: rtw_createbss_cmd

示例2: rtw_hw_suspend23a

示例3: rtw_hal_deinit

示例4: rtw_hal_init

示例5: netdev_close

示例6: rtw_ips_pwr_down

示例7: rtw_ips_pwr_up

示例8: rtw_ips_pwr_down

示例9: rtw_ips_pwr_down

示例10: rtw_ips_pwr_down

示例11: netdev_close

示例12: rtw_ips_pwr_up

示例13: rtw_ips_pwr_down23a

示例14: netdev_close

示例15: rtw_hal_init

示例16: rtw_hal_deinit

示例17: netdev_close

示例18: rtw_hal_deinit

示例19: rtw_gspi_suspend

示例20: _netdev_open

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053