• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ rtw_read8函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rtw_read8函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_read8函数的具体用法？C++ rtw_read8怎么用？C++ rtw_read8使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rtw_read8函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: CheckFwReadLastH2C

static BOOLEAN
CheckFwReadLastH2C(
	IN	PADAPTER		Adapter,
	IN	u8		BoxNum
)
{
	u8	valHMETFR;
	BOOLEAN	 Result = _FALSE;
	
	valHMETFR = rtw_read8(Adapter, REG_HMETFR);
	//RT_TRACE(COMP_INIT,DBG_LOUD,("REG[%x] = %x\n", 	REG_HMETFR, valHMETFR));

	// Do not seperate to 91C and 88C, we use the same setting. Suggested by SD4 Filen. 2009.12.03.
	if(((valHMETFR>>BoxNum)&BIT0) == 0)
		Result = _TRUE;

	return Result;
}
开发者ID:kozmo2k4，项目名称:linux-amlogic，代码行数:18，代码来源:rtl8192d_cmd.c


示例2: rtl8188e_sreset_linked_status_check

void rtl8188e_sreset_linked_status_check(struct adapter *padapter)
{
	u32 rx_dma_status = 0;
	u8 fw_status=0;
	rx_dma_status = rtw_read32(padapter,REG_RXDMA_STATUS);
	if (rx_dma_status!= 0x00){
		DBG_88E("%s REG_RXDMA_STATUS:0x%08x\n",__func__,rx_dma_status);
		rtw_write32(padapter,REG_RXDMA_STATUS,rx_dma_status);
	}
	fw_status = rtw_read8(padapter,REG_FMETHR);
	if (fw_status != 0x00)
	{
		if (fw_status == 1)
			DBG_88E("%s REG_FW_STATUS (0x%02x), Read_Efuse_Fail !! \n",__func__,fw_status);
		else if (fw_status == 2)
			DBG_88E("%s REG_FW_STATUS (0x%02x), Condition_No_Match !! \n",__func__,fw_status);
	}
}
开发者ID:simar7，项目名称:rtl8188eu，代码行数:18，代码来源:rtl8188e_sreset.c


示例3: ODM_Read1Byte

u8
ODM_Read1Byte(
	PDM_ODM_T		pDM_Odm,
	u32			RegAddr
	)
{
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
	prtl8192cd_priv	priv	= pDM_Odm->priv;
	return	RTL_R8(RegAddr);
#elif(DM_ODM_SUPPORT_TYPE & ODM_CE)
	struct rtw_adapter *		Adapter = pDM_Odm->Adapter;
	return rtw_read8(Adapter,RegAddr);
#elif(DM_ODM_SUPPORT_TYPE & ODM_MP)
	struct rtw_adapter *		Adapter = pDM_Odm->Adapter;
	return	PlatformEFIORead1Byte(Adapter, RegAddr);
#endif

}
开发者ID:Daniil2017，项目名称:lenovo-yoga-13-ubuntu-wifi-driver，代码行数:18，代码来源:odm_interface.c


示例4: dm_InitGPIOSetting

static void dm_InitGPIOSetting(struct adapter *Adapter)
{
#ifdef CONFIG_BT_COEXIST
	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
#endif
	u8	tmp1byte;

	tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
	tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);

#ifdef CONFIG_BT_COEXIST
	/*  UMB-B cut bug. We need to support the modification. */
	if (IS_81xxC_VENDOR_UMC_B_CUT(hal_data->VersionID) &&
	    hal_data->bt_coexist.BT_Coexist)
		tmp1byte |= BIT5;
#endif
	rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
}
开发者ID:Juhnson，项目名称:rtl8188eu，代码行数:18，代码来源:rtl8188e_dm.c


示例5: SwLedOn

/*		Turn on LED according to LedPin specified. */
void SwLedOn(struct adapter *padapter, struct LED_871x *pLed)
{
	u8	LedCfg;

	if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
		return;
	LedCfg = rtw_read8(padapter, REG_LEDCFG2);
	switch (pLed->LedPin) {
	case LED_PIN_LED0:
		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /*  SW control led0 on. */
		break;
	case LED_PIN_LED1:
		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT5); /*  SW control led1 on. */
		break;
	default:
		break;
	}
	pLed->bLedOn = true;
}
开发者ID:09sea98，项目名称:rtl8188eu，代码行数:20，代码来源:rtl8188eu_led.c


示例6: CheckWriteH2C

static BOOLEAN
CheckWriteH2C(
	IN	PADAPTER		Adapter,
	IN	u8		BoxNum
)
{
	u8	valHMETFR;
	BOOLEAN	Result = _FALSE;
	
	valHMETFR = rtw_read8(Adapter, REG_HMETFR);

	//DbgPrint("CheckWriteH2C(): Reg[0x%2x] = %x\n",REG_HMETFR, valHMETFR);

	if(((valHMETFR>>BoxNum)&BIT0) == 1)
		Result = _TRUE;
	
	return Result;

}
开发者ID:kozmo2k4，项目名称:linux-amlogic，代码行数:19，代码来源:rtl8192d_cmd.c


示例7: disable_dm

static void disable_dm(struct adapter *padapter)
{
	u8 v8;

	/* 3 1. disable firmware dynamic mechanism */
	/*  disable Power Training, Rate Adaptive */
	v8 = rtw_read8(padapter, REG_BCN_CTRL);
	v8 &= ~EN_BCN_FUNCTION;
	rtw_write8(padapter, REG_BCN_CTRL, v8);

	/* 3 2. disable driver dynamic mechanism */
	/*  disable Dynamic Initial Gain */
	/*  disable High Power */
	/*  disable Power Tracking */
	Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);

	/*  enable APK, LCK and IQK but disable power tracking */
	Switch_DM_Func(padapter, DYNAMIC_RF_CALIBRATION, true);
}
开发者ID:BARBAZ，项目名称:rtl8188eu，代码行数:19，代码来源:rtw_mp.c


示例8: _PageWrite

static VOID
_PageWrite(
	IN		PADAPTER		Adapter,
	IN		u32			page,
	IN		PVOID			buffer,
	IN		u32			size
	)
{
	u8 value8;
	u8 u8Page = (u8) (page & 0x07) ;

	value8 = rtw_read8(Adapter, REG_MCUFWDL+2);
	//printk("%s,REG_%02x(0x%02x),wvalue(0x%02x)\n",__FUNCTION__,(REG_MCUFWDL+2),value8,(value8 & 0xF8) |u8Page);

	value8 = (value8 & 0xF8) |u8Page;
	 
	rtw_write8(Adapter, REG_MCUFWDL+2,value8);
	_BlockWrite(Adapter,buffer,size);
}
开发者ID:WayWingsDev，项目名称:Gplus_2159_0801，代码行数:19，代码来源:rtl8192c_d_hal_init.c


示例9: rtl8188e_sreset_linked_status_check

void rtl8188e_sreset_linked_status_check(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;

	u32 rx_dma_status = 0;
	u8 fw_status=0;
	rx_dma_status = rtw_read32(padapter,REG_RXDMA_STATUS);
	if(rx_dma_status!= 0x00){
		DBG_8192C("%s REG_RXDMA_STATUS:0x%08x \n",__FUNCTION__,rx_dma_status);
		rtw_write32(padapter,REG_RXDMA_STATUS,rx_dma_status);
	}
	fw_status = rtw_read8(padapter,REG_FMETHR);
	if(fw_status != 0x00)
	{
		if(fw_status == 1)
			DBG_8192C("%s REG_FW_STATUS (0x%02x), Read_Efuse_Fail !!   \n",__FUNCTION__,fw_status);
		else if(fw_status == 2)
			DBG_8192C("%s REG_FW_STATUS (0x%02x), Condition_No_Match !!   \n",__FUNCTION__,fw_status);
	}
#if 0
	u32 regc50,regc58,reg824,reg800;
	regc50 = rtw_read32(padapter,0xc50);
	regc58 = rtw_read32(padapter,0xc58);
	reg824 = rtw_read32(padapter,0x824);
	reg800 = rtw_read32(padapter,0x800);
	if(	((regc50&0xFFFFFF00)!= 0x69543400)||
		((regc58&0xFFFFFF00)!= 0x69543400)||
		(((reg824&0xFFFFFF00)!= 0x00390000)&&(((reg824&0xFFFFFF00)!= 0x80390000)))||
		( ((reg800&0xFFFFFF00)!= 0x03040000)&&((reg800&0xFFFFFF00)!= 0x83040000)))
	{
		DBG_8192C("%s regc50:0x%08x, regc58:0x%08x, reg824:0x%08x, reg800:0x%08x,\n", __FUNCTION__,
			regc50, regc58, reg824, reg800);
		rtw_hal_sreset_reset(padapter);
	}
#endif

	if (psrtpriv->dbg_trigger_point == SRESET_TGP_LINK_STATUS) {
		psrtpriv->dbg_trigger_point = SRESET_TGP_NULL;
		rtw_hal_sreset_reset(padapter);
		return;
	}
}
开发者ID:OpenLD，项目名称:linux-wetek-3.10.y，代码行数:43，代码来源:rtl8188e_sreset.c


示例10: rtw_hal_check_rxfifo_full

void rtw_hal_check_rxfifo_full(struct adapter *adapter)
{
	struct dvobj_priv *psdpriv = adapter->dvobj;
	struct debug_priv *pdbgpriv = &psdpriv->drv_dbg;
	int save_cnt = false;

	/* switch counter to RX fifo */
	/* printk("8723b or 8192e , MAC_667 set 0xf0\n"); */
	rtw_write8(adapter, REG_RXERR_RPT+3, rtw_read8(adapter, REG_RXERR_RPT+3)|0xf0);
	save_cnt = true;
	/* todo: other chips */

	if (save_cnt) {
		/* rtw_write8(adapter, REG_RXERR_RPT+3, rtw_read8(adapter, REG_RXERR_RPT+3)|0xa0); */
		pdbgpriv->dbg_rx_fifo_last_overflow = pdbgpriv->dbg_rx_fifo_curr_overflow;
		pdbgpriv->dbg_rx_fifo_curr_overflow = rtw_read16(adapter, REG_RXERR_RPT);
		pdbgpriv->dbg_rx_fifo_diff_overflow = pdbgpriv->dbg_rx_fifo_curr_overflow-pdbgpriv->dbg_rx_fifo_last_overflow;
	}
}
开发者ID:grate-driver，项目名称:linux，代码行数:19，代码来源:hal_com.c


示例11: rtl8188es_set_output_gpio

void rtl8188es_set_output_gpio(_adapter* padapter, u8 index, u8 outputval)
{
	if ( index <= 7 ) {
		/* config GPIO mode */
		rtw_write8(padapter, REG_GPIO_PIN_CTRL + 3, rtw_read8(padapter, REG_GPIO_PIN_CTRL + 3) & ~BIT(index) );

		/* config GPIO Sel */
		/* 0: input */
		/* 1: output */
		rtw_write8(padapter, REG_GPIO_PIN_CTRL + 2, rtw_read8(padapter, REG_GPIO_PIN_CTRL + 2) | BIT(index));

		/* set output value */
		if ( outputval ) {
			rtw_write8(padapter, REG_GPIO_PIN_CTRL + 1, rtw_read8(padapter, REG_GPIO_PIN_CTRL + 1) | BIT(index));
		} else {
			rtw_write8(padapter, REG_GPIO_PIN_CTRL + 1, rtw_read8(padapter, REG_GPIO_PIN_CTRL + 1) & ~BIT(index));
		}
	} else {
		/* 88C Series: */
		/* index: 11~8 transform to 3~0 */
		/* 8723 Series: */
		/* index: 12~8 transform to 4~0 */
		index -= 8;

		/* config GPIO mode */
		rtw_write8(padapter, REG_GPIO_PIN_CTRL_2 + 3, rtw_read8(padapter, REG_GPIO_PIN_CTRL_2 + 3) & ~BIT(index) );

		/* config GPIO Sel */
		/* 0: input */
		/* 1: output */
		rtw_write8(padapter, REG_GPIO_PIN_CTRL_2 + 2, rtw_read8(padapter, REG_GPIO_PIN_CTRL_2 + 2) | BIT(index));

		/* set output value */
		if ( outputval ) {
			rtw_write8(padapter, REG_GPIO_PIN_CTRL_2 + 1, rtw_read8(padapter, REG_GPIO_PIN_CTRL_2 + 1) | BIT(index));
		} else {
			rtw_write8(padapter, REG_GPIO_PIN_CTRL_2 + 1, rtw_read8(padapter, REG_GPIO_PIN_CTRL_2 + 1) & ~BIT(index));
		}
	}
}
开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:40，代码来源:rtl8188e_cmd.c


示例12: rpwmtimeout_workitem_callback

static void rpwmtimeout_workitem_callback(struct work_struct *work)
{
	struct adapter *padapter;
	struct dvobj_priv *dvobj;
	struct pwrctrl_priv *pwrpriv;


	pwrpriv = container_of(work, struct pwrctrl_priv, rpwmtimeoutwi);
	dvobj = pwrctl_to_dvobj(pwrpriv);
	padapter = dvobj->if1;
/* 	DBG_871X("+%s: rpwm = 0x%02X cpwm = 0x%02X\n", __func__, pwrpriv->rpwm, pwrpriv->cpwm); */

	down(&pwrpriv->lock);
	if ((pwrpriv->rpwm == pwrpriv->cpwm) || (pwrpriv->cpwm >= PS_STATE_S2)) {
		DBG_871X("%s: rpwm = 0x%02X cpwm = 0x%02X CPWM done!\n", __func__, pwrpriv->rpwm, pwrpriv->cpwm);
		goto exit;
	}
	up(&pwrpriv->lock);

	if (rtw_read8(padapter, 0x100) != 0xEA) {
		struct reportpwrstate_parm report;

		report.state = PS_STATE_S2;
		DBG_871X("\n%s: FW already leave 32K!\n\n", __func__);
		cpwm_int_hdl(padapter, &report);

		return;
	}

	down(&pwrpriv->lock);

	if ((pwrpriv->rpwm == pwrpriv->cpwm) || (pwrpriv->cpwm >= PS_STATE_S2)) {
		DBG_871X("%s: cpwm =%d, nothing to do!\n", __func__, pwrpriv->cpwm);
		goto exit;
	}
	pwrpriv->brpwmtimeout = true;
	rtw_set_rpwm(padapter, pwrpriv->rpwm);
	pwrpriv->brpwmtimeout = false;

exit:
	up(&pwrpriv->lock);
}
开发者ID:Lyude，项目名称:linux，代码行数:42，代码来源:rtw_pwrctrl.c


示例13: rtl8192d_PHY_PowerDownAnotherPHY

VOID
rtl8192d_PHY_PowerDownAnotherPHY(
	IN	PADAPTER		Adapter,	
	IN	BOOLEAN			bMac0
	)
{
	u8	u1bTmp;
#ifdef CONFIG_PCI_HCI
	u8	Direct = bMac0==_TRUE?BIT3|BIT2:BIT3;
#endif //CONFIG_PCI_HCI
	u8	MAC_REG = bMac0==_TRUE?REG_MAC1:REG_MAC0;
	u8	MAC_ON_BIT = bMac0==_TRUE?MAC1_ON:MAC0_ON;
#ifdef CONFIG_USB_HCI
	u32	MaskforPhySet = 0;
#endif

	//RT_TRACE(COMP_RF, DBG_LOUD, ("====>PHY_PowerDownAnotherPHY\n"));

	// check MAC0 enable or not again now, if enabled, not power down radio A.
	u1bTmp = rtw_read8(Adapter, MAC_REG);

	if (!(u1bTmp&MAC_ON_BIT))
	{	
		//RT_TRACE(COMP_INIT, DBG_LOUD, ("PHY_PowerDownAnotherPHY power down\n"));

		// power down RF radio A according to YuNan's advice.
#ifdef CONFIG_PCI_HCI
		MpWritePCIDwordDBI8192D(Adapter, 
					rFPGA0_XA_LSSIParameter, 
					0x00000000,
					Direct);
#elif defined(CONFIG_USB_HCI)
		if(bMac0)
			MaskforPhySet = MAC0_ACCESS_PHY1;
		else
			MaskforPhySet = MAC1_ACCESS_PHY0;
		  rtw_write32(Adapter, rFPGA0_XA_LSSIParameter|MaskforPhySet, 0x00000000);
#endif
	}

	//RT_TRACE(COMP_RF, DBG_LOUD, ("<====PHY_PowerDownAnotherPHY\n"));	
}
开发者ID:AxelLin，项目名称:MTK5931，代码行数:42，代码来源:rtl8192d_rf6052.c


示例14: read_macreg

u32 read_macreg(struct adapter *padapter, u32 addr, u32 sz)
{
	u32 val = 0;

	switch (sz) {
	case 1:
		val = rtw_read8(padapter, addr);
		break;
	case 2:
		val = rtw_read16(padapter, addr);
		break;
	case 4:
		val = rtw_read32(padapter, addr);
		break;
	default:
		val = 0xffffffff;
		break;
	}

	return val;
}
开发者ID:BARBAZ，项目名称:rtl8188eu，代码行数:21，代码来源:rtw_mp.c


示例15: rtl8723a_InitHalDm

void rtl8723a_InitHalDm(struct rtw_adapter *Adapter)
{
	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	struct dm_odm_t *pDM_Odm = &pHalData->odmpriv;
	u8	i;

	pdmpriv->DM_Type = DM_Type_ByDriver;
	pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE;

#ifdef CONFIG_8723AU_BT_COEXIST
	pdmpriv->DMFlag |= DYNAMIC_FUNC_BT;
#endif
	pdmpriv->InitDMFlag = pdmpriv->DMFlag;

	Update_ODM_ComInfo_8723a(Adapter);
	ODM23a_DMInit(pDM_Odm);
	/*  Save REG_INIDATA_RATE_SEL value for TXDESC. */
	for (i = 0; i < 32; i++)
		pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL+i) & 0x3f;
}
开发者ID:7799，项目名称:linux，代码行数:21，代码来源:rtl8723a_dm.c


示例16: _is_fw_read_cmd_down

static u8 _is_fw_read_cmd_down(_adapter* padapter, u8 msgbox_num)
{
	u8	read_down = _FALSE;
	int	retry_cnts = 100;

	u8 valid;

	//DBG_8192C(" _is_fw_read_cmd_down ,reg_1cc(%x),msg_box(%d)...\n",rtw_read8(padapter,REG_HMETFR),msgbox_num);

	do{
		valid = rtw_read8(padapter,REG_HMETFR) & BIT(msgbox_num);
		if(0 == valid ){
			read_down = _TRUE;
		}
		else
			rtw_msleep_os(1);
	}while( (!read_down) && (retry_cnts--));

	return read_down;

}
开发者ID:BoteRock，项目名称:tl-wn723n-linux-4.3，代码行数:21，代码来源:rtl8188e_cmd.c


示例17: SwLedOn_8821AE

/*
 *	Description:
 *		Turn on LED according to LedPin specified.
 *   */
VOID
SwLedOn_8821AE(
	IN	PADAPTER		Adapter,
	IN	PLED_PCIE		pLed
)
{
	u16	LedReg = REG_LEDCFG0;
	u8	LedCfg = 0;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	struct led_priv	*ledpriv = &(Adapter->ledpriv);

	if (RTW_CANNOT_RUN(Adapter))
		return;

	switch (pLed->LedPin) {
	case LED_PIN_LED0:
		if (ledpriv->LedStrategy == SW_LED_MODE10)
			LedReg = REG_LEDCFG0;
		else
			LedReg = REG_LEDCFG2;
		break;

	case LED_PIN_LED1:
		LedReg = REG_LEDCFG1;
		break;

	case LED_PIN_GPIO0:
	default:
		break;
	}

	/* RTW_INFO("In SwLedOn, LedAddr:%X LEDPIN=%d\n", LedReg, pLed->LedPin); */

	LedCfg = rtw_read8(Adapter, LedReg);
	LedCfg |= BIT5; /* Set 0x4c[21] */
	LedCfg &= ~BIT3; /* Clear 0x4c[19] */
	LedCfg &= ~(BIT6 | BIT2 | BIT1 | BIT0); /* Clear 0x4c[22] and 0x4c[18:16] */
	rtw_write8(Adapter, LedReg, LedCfg); /* SW control led0 on.	 */
	pLed->bLedOn = _TRUE;
}
开发者ID:plathome，项目名称:debian_based_firmware，代码行数:44，代码来源:rtl8812ae_led.c


示例18: SwLedOff

//
//	Description:
//		Turn off LED according to LedPin specified.
//
void
SwLedOff(
    _adapter			*padapter,
    PLED_871x		pLed
)
{
    u8	LedCfg;
    //HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);

    if((padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE))
    {
        goto exit;
    }

    switch(pLed->LedPin)
    {
    case LED_PIN_GPIO0:
        break;

    case LED_PIN_LED0:
        rtw_write8(padapter, REG_LEDCFG0, (LedCfg&0xf0)|BIT5|BIT6); // SW control led0 on.
        break;

    case LED_PIN_LED1:
        rtw_write8(padapter, REG_LEDCFG1, (LedCfg&0x00)|BIT5|BIT6); // SW control led1 on.
        break;

    case LED_PIN_LED2:
        LedCfg=rtw_read8(padapter, REG_LEDCFG2);
        rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x80)|BIT3|BIT5); // SW control led1 on.
        break;

    default:
        break;

    }
exit:
    pLed->bLedOn = _FALSE;

}
开发者ID:avila-devlogic，项目名称:D33_KK_Kernel，代码行数:44，代码来源:rtl8723au_led.c


示例19: dm_InitGPIOSetting

//
// Initialize GPIO setting registers
//
static void
dm_InitGPIOSetting(
    IN	PADAPTER	Adapter
)
{
    PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(Adapter);

    u8	tmp1byte;

    tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
    tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);

#ifdef CONFIG_BT_COEXIST
    // UMB-B cut bug. We need to support the modification.
    if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) &&
            pHalData->bt_coexist.BT_Coexist)
    {
        tmp1byte |= (BIT5);
    }
#endif
    rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);

}
开发者ID:houzhenggang，项目名称:BPI-M3-bsp，代码行数:26，代码来源:rtl8188e_dm.c


示例20: disable_dm

static void disable_dm(PADAPTER padapter)
{
	u8 v8;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;


	//3 1. disable firmware dynamic mechanism
	// disable Power Training, Rate Adaptive
	v8 = rtw_read8(padapter, REG_BCN_CTRL);
	v8 &= ~EN_BCN_FUNCTION;
	rtw_write8(padapter, REG_BCN_CTRL, v8);

	//3 2. disable driver dynamic mechanism
	// disable Dynamic Initial Gain
	// disable High Power
	// disable Power Tracking
	Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);

	// enable APK, LCK and IQK but disable power tracking
	pdmpriv->TxPowerTrackControl = _FALSE;
	Switch_DM_Func(padapter, DYNAMIC_FUNC_SS, _TRUE);
}
开发者ID:HoraceWeebler，项目名称:rtl8192cu_beaglebone，代码行数:23，代码来源:rtw_mp.c



注：本文中的rtw_read8函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ rtw_write8函数代码示例发布时间：2022-05-30
下一篇：
C++ rtw_read32函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap