C++ s3c2410_dma_ctrl函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中s3c2410_dma_ctrl函数的典型用法代码示例。如果您正苦于以下问题：C++ s3c2410_dma_ctrl函数的具体用法？C++ s3c2410_dma_ctrl怎么用？C++ s3c2410_dma_ctrl使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了s3c2410_dma_ctrl函数的19个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: s3c_dma_trigger

static int s3c_dma_trigger(struct snd_pcm_substream *substream, int cmd)
{
	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
	int ret = 0;

	pr_debug("Entered %s\n", __func__);

	spin_lock(&prtd->lock);

	switch (cmd) {
	case SNDRV_PCM_TRIGGER_RESUME:
		s3c_dma_enqueue(substream);
	case SNDRV_PCM_TRIGGER_START:
	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
		prtd->state |= ST_RUNNING;
		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
		break;

	case SNDRV_PCM_TRIGGER_SUSPEND:
		if (prtd->dma_loaded)
			prtd->dma_loaded--;
	case SNDRV_PCM_TRIGGER_STOP:
	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
		prtd->state &= ~ST_RUNNING;
		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
		break;

	default:
		ret = -EINVAL;
		break;
	}

	spin_unlock(&prtd->lock);

	return ret;
}

开发者ID:AustinBleax，项目名称:Bali_SK4G，代码行数:36，代码来源:s3c-dma-pcm.c

示例2: s3c_audio_suspend

int s3c_audio_suspend(audio_state_t *s, u32 state, u32 level)
{
	if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) {
		audio_stream_t *is = s->input_stream;
		audio_stream_t *os = s->output_stream;
		int stopstate;

		if (is  ) {
			stopstate = is->stopped;
			audio_stop_dma(is);
			s3c2410_dma_ctrl(is->dma, S3C2410_DMAOP_FLUSH);
			is->stopped = stopstate;
		}
		if (os ) {
			stopstate = os->stopped;
			audio_stop_dma(os);
			s3c2410_dma_ctrl(os->dma, S3C2410_DMAOP_FLUSH);
			os->stopped = stopstate;
		}
		if (AUDIO_ACTIVE(s) && s->hw_shutdown)
			s->hw_shutdown(s->data);
	}
	return 0;
}

开发者ID:maliyu，项目名称:SOM2416，代码行数:24，代码来源:s3c24xx_pcm.c

示例3: s3c2410_dma_flush

static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
{
	struct s3c2410_dma_buf *buf, *next;
	unsigned long flags;

	pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);

	dbg_showchan(chan);

	local_irq_save(flags);

	if (chan->state != S3C2410_DMA_IDLE) {
		pr_debug("%s: stopping channel...\n", __func__ );
		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
	}

	buf = chan->curr;
	if (buf == NULL)
		buf = chan->next;

	chan->curr = chan->next = chan->end = NULL;

	if (buf != NULL) {
		for ( ; buf != NULL; buf = next) {
			next = buf->next;

			pr_debug("%s: free buffer %p, next %p\n",
			       __func__, buf, buf->next);

			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
			s3c2410_dma_freebuf(buf);
		}
	}

	dbg_showregs(chan);

	s3c2410_dma_waitforstop(chan);


	dbg_showregs(chan);

	local_irq_restore(flags);

	return 0;
}

开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:45，代码来源:dma.c

示例4: s3c24xx_pcm_prepare

static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
{
	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
	int ret = 0;

	DBG("Entered %s\n", __func__);

	/* return if this is a bufferless transfer e.g.
	 * codec <--> BT codec or GSM modem -- lg FIXME */
	if (!prtd->params)
		return 0;

	/* channel needs configuring for mem=>device, increment memory addr,
	 * sync to pclk, half-word transfers to the IIS-FIFO. */
	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
		s3c2410_dma_devconfig(prtd->params->channel,
				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
				S3C2410_DISRCC_APB, prtd->params->dma_addr);

		s3c2410_dma_config(prtd->params->channel,
				prtd->params->dma_size,
				S3C2410_DCON_SYNC_PCLK |
				S3C2410_DCON_HANDSHAKE);
	} else {
		s3c2410_dma_config(prtd->params->channel,
				prtd->params->dma_size,
				S3C2410_DCON_HANDSHAKE |
				S3C2410_DCON_SYNC_PCLK);

		s3c2410_dma_devconfig(prtd->params->channel,
					S3C2410_DMASRC_HW, 0x3,
					prtd->params->dma_addr);
	}

	/* flush the DMA channel */
	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
	prtd->dma_loaded = 0;
	prtd->dma_pos = prtd->dma_start;

	/* enqueue dma buffers */
	s3c24xx_pcm_enqueue(substream);

	return ret;
}

开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:44，代码来源:s3c24xx-pcm.c

示例5: s3c24xx_i2s_trigger

static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
			       struct snd_soc_dai *dai)
{
	int ret = 0;
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct s3c_dma_params *dma_data =
		snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);

	pr_debug("Entered %s\n", __func__);

	switch (cmd) {
	case SNDRV_PCM_TRIGGER_START:
	case SNDRV_PCM_TRIGGER_RESUME:
	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
		if (!s3c24xx_snd_is_clkmaster()) {
			ret = s3c24xx_snd_lrsync();
			if (ret)
				goto exit_err;
		}

		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
			s3c24xx_snd_rxctrl(1);
		else
			s3c24xx_snd_txctrl(1);

		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
		break;
	case SNDRV_PCM_TRIGGER_STOP:
	case SNDRV_PCM_TRIGGER_SUSPEND:
	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
			s3c24xx_snd_rxctrl(0);
		else
			s3c24xx_snd_txctrl(0);
		break;
	default:
		ret = -EINVAL;
		break;
	}

exit_err:
	return ret;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:43，代码来源:s3c24xx-i2s.c

示例6: s3c2410_dma_free

/* s3c2410_dma_free
 *
 * release the given channel back to the system, will stop and flush
 * any outstanding transfers, and ensure the channel is ready for the
 * next claimant.
 *
 * Note, although a warning is currently printed if the freeing client
 * info is not the same as the registrant's client info, the free is still
 * allowed to go through.
 */
int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
{
	unsigned long flags;
	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
	pr_debug("%s: DMA channel %d will be stopped\n", __FUNCTION__, chan->number);

	if (chan == NULL)
		return -EINVAL;

	local_irq_save(flags);

	if (chan->client != client) {
		printk(KERN_WARNING
		       "DMA CH %d: possible free from different client (channel %p, passed %p)\n",
		       channel, chan->client, client);
	}

	/* sort out stopping and freeing the channel */

	if (chan->state != S3C_DMA_IDLE) {
		pr_debug("%s: need to stop dma channel %p\n", __FUNCTION__, chan);

		/* possibly flush the channel */
		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
	}

	chan->client = NULL;
	chan->in_use = 0;

	chan->dma_con->in_use--;

	if (chan->irq_claimed)
		free_irq(chan->irq, (void *)chan->dma_con);

	chan->irq_claimed = 0;

	if (!(channel & DMACH_LOW_LEVEL))
		dma_chan_map[channel] = NULL;

	local_irq_restore(flags);

	return 0;
}

开发者ID:illyah，项目名称:samsung_kernel_volans，代码行数:53，代码来源:dma-pl330.c

示例7: s3c_dma_prepare

static int s3c_dma_prepare(struct snd_pcm_substream *substream)
{
	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
	int ret = 0;

	pr_debug("Entered %s\n", __func__);

	/* return if this is a bufferless transfer e.g.
	 * codec <--> BT codec or GSM modem -- lg FIXME */
	if (!prtd->params)
		return 0;

	/* channel needs configuring for mem=>device, increment memory addr,
	 * sync to pclk, half-word transfers to the IIS-FIFO. */
	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { 
		s3c2410_dma_devconfig(prtd->params->channel,
				      S3C2410_DMASRC_MEM,
				      prtd->params->dma_addr);
	} else {
		s3c2410_dma_devconfig(prtd->params->channel,
				      S3C2410_DMASRC_HW,
				      prtd->params->dma_addr);
	}

	s3c2410_dma_config(prtd->params->channel,
			   prtd->params->dma_size);

/* To fix the pcm buffer underrun in case of high busy state ( ex. Starting broswer ) 2010.06.22*/
	if(substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
		ring_buf_index   = 0;
		period_index     = 0;
	}

	/* flush the DMA channel */
	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
	prtd->dma_loaded = 0;
	prtd->dma_pos = prtd->dma_start;

	/* enqueue dma buffers */
	s3c_dma_enqueue(substream);

	return ret;
}

开发者ID:AustinBleax，项目名称:Bali_SK4G，代码行数:43，代码来源:s3c-dma.c

示例8: s3c2410_dma_flush

static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
{
	s3c2410_dma_buf_t *buf, *next;
	unsigned long flags;

	pr_debug("%s:\n", __FUNCTION__);

	local_irq_save(flags);

	if (chan->state != S3C2410_DMA_IDLE) {
		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
	}

	buf = chan->curr;
	if (buf == NULL)
		buf = chan->next;

	chan->curr = chan->next = chan->end = NULL;

	if (buf != NULL) {
		for ( ; buf != NULL; buf = next) {
			next = buf->next;

			pr_debug("%s: free buffer %p, next %p\n",
			       __FUNCTION__, buf, buf->next);

			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
			s3c2410_dma_freebuf(buf);
		}
	}

	local_irq_restore(flags);

	return 0;
}

开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:36，代码来源:dma.c

示例9: s3c_mem_ioctl


//.........这里部分代码省略.........
			if(copy_to_user((struct s3c_mem_alloc *)arg, &param, sizeof(struct s3c_mem_alloc))){
				mutex_unlock(&mem_share_free_lock);
				return -EFAULT;
			}

			mutex_unlock(&mem_share_free_lock);

			break;

#if 0 /* IOCTL for Old PL-080 codes (dma-pl080.c) */
		case S3C_MEM_DMA_COPY:
			if(copy_from_user(&dma_param, (struct s3c_mem_dma_param *)arg, sizeof(struct s3c_mem_dma_param))) {
				return -EFAULT;
			}
			//printk("S3C_MEM_DMA_COPY called\n");

			if (s3c2410_dma_request(DMACH_3D_M2M, &s3c_m2m_dma_client, NULL)) {
				printk(KERN_WARNING "Unable to get DMA channel.\n");
				return -1;
			}

			s3c2410_dma_set_buffdone_fn(DMACH_3D_M2M, s3c_m2m_dma_finish);

			//dma_cache_maint(dma_param.src_addr,sizeof(unsigned long long), DMA_BIDIRECTIONAL);

 //  		    	printk("MEMCPY src=%p,dst=%p,size=%d\n", dma_param.src_addr,dma_param.dst_addr, dma_param.size);

			/* Source address */
			s3c2410_dma_devconfig(DMACH_3D_M2M, S3C_DMA_MEM2MEM, dma_param.src_addr);
			s3c2410_dma_config(DMACH_3D_M2M, 8);

			/* Destination address : Data buffer address */
			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, dma_param.dst_addr, dma_param.size);
			s3c2410_dma_ctrl(DMACH_3D_M2M, S3C2410_DMAOP_START);

			wait_for_completion(&s3c_m2m_dma_complete);
#if 0 /* Test code with hard coding */
			/* Destination address : Data buffer address */
			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, 0x27a00000, 0x4000);
			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, 0x27a00000+0x10000, 0x4000);
			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, 0x27a00000+0x20000, 0x4000);
			s3c2410_dma_ctrl(DMACH_3D_M2M, S3C2410_DMAOP_START);

			wait_for_completion(&s3c_m2m_dma_complete);
			//wait_for_completion(&s3c_m2m_dma_complete);
			//wait_for_completion(&s3c_m2m_dma_complete);

			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, 0x27a00000+0x30000, 0x4000);
			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, 0x27a00000+0x40000, 0x4000);
			s3c2410_dma_ctrl(DMACH_3D_M2M, S3C2410_DMAOP_START);
			wait_for_completion(&s3c_m2m_dma_complete);
			//wait_for_completion(&s3c_m2m_dma_complete);

			s3c2410_dma_enqueue(DMACH_3D_M2M, 0, 0x27a00000+0x50000, 0x4000);
			s3c2410_dma_ctrl(DMACH_3D_M2M, S3C2410_DMAOP_START);
			wait_for_completion(&s3c_m2m_dma_complete);
#endif /* Test code with hard coding */

			s3c2410_dma_free(DMACH_3D_M2M, &s3c_m2m_dma_client);

			if(copy_to_user((struct s3c_mem_dma_param *)arg, &dma_param, sizeof(struct s3c_mem_dma_param))) {
				return -EFAULT;
			}

			break;

开发者ID:kzlin129，项目名称:tt-gpl，代码行数:66，代码来源:s3c_mem.c

示例10: s3c_dma_trigger

static inline int s3c_dma_trigger(unsigned ch)
{
	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
}

开发者ID:badwtg1111，项目名称:linux-2.6，代码行数:4，代码来源:s3c-dma-ops.c

示例11: s3c2410_dma_enqueue

int s3c2410_dma_enqueue(unsigned int channel, void *id,
                        dma_addr_t data, int size)
{
    struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
    struct s3c2410_dma_buf *buf;
    unsigned long flags;

    if (chan == NULL)
        return -EINVAL;

    pr_debug("%s: id=%p, data=%08x, size=%d\n",
             __func__, id, (unsigned int)data, size);

    buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
    if (buf == NULL) {
        pr_debug("%s: out of memory (%ld alloc)\n",
                 __func__, (long)sizeof(*buf));
        return -ENOMEM;
    }

    //pr_debug("%s: new buffer %p\n", __func__, buf);
    //dbg_showchan(chan);

    buf->next  = NULL;
    buf->data  = buf->ptr = data;
    buf->size  = size;
    buf->id    = id;
    buf->magic = BUF_MAGIC;

    local_irq_save(flags);

    if (chan->curr == NULL) {
        /* we've got nothing loaded... */
        pr_debug("%s: buffer %p queued onto empty channel\n",
                 __func__, buf);

        chan->curr = buf;
        chan->end  = buf;
        chan->next = NULL;
    } else {
        pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
                 chan->number, __func__, buf);

        if (chan->end == NULL)
            pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
                     chan->number, __func__, chan);

        chan->end->next = buf;
        chan->end = buf;
    }

    /* if necessary, update the next buffer field */
    if (chan->next == NULL)
        chan->next = buf;

    /* check to see if we can load a buffer */
    if (chan->state == S3C2410_DMA_RUNNING) {
        if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
            if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
                printk(KERN_ERR "dma%d: loadbuffer:"
                       "timeout loading buffer\n",
                       chan->number);
                dbg_showchan(chan);
                local_irq_restore(flags);
                return -EINVAL;
            }
        }

        while (s3c2410_dma_canload(chan) && chan->next != NULL) {
            s3c2410_dma_loadbuffer(chan, chan->next);
        }
    } else if (chan->state == S3C2410_DMA_IDLE) {
        if (chan->flags & S3C2410_DMAF_AUTOSTART) {
            s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
                             S3C2410_DMAOP_START);
        }
    }

    local_irq_restore(flags);
    return 0;
}

开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:81，代码来源:dma.c

示例12: s3c2410_dma_enqueue

/* s3c2410_dma_enqueue
 *
 * queue an given buffer for dma transfer.
 *
 * id         the device driver's id information for this buffer
 * data       the physical address of the buffer data
 * size       the size of the buffer in bytes
 *
 * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
 * is checked, and if set, the channel is started. If this flag isn't set,
 * then an error will be returned.
 *
 * It is possible to queue more than one DMA buffer onto a channel at
 * once, and the code will deal with the re-loading of the next buffer
 * when necessary.
 */
int s3c2410_dma_enqueue(unsigned int channel, void *id,
			dma_addr_t data, int size)
{
	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
	struct s3c_dma_buf *buf;
	unsigned long flags;

	pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int) data, size);

	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
	if (buf == NULL) {
		printk(KERN_ERR "dma <%d> no memory for buffer\n", channel);
		return -ENOMEM;
	}

	pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);

	buf->next = NULL;
	buf->data = buf->ptr = data;
	buf->size = size;
	buf->id = id;
	buf->magic = BUF_MAGIC;

	local_irq_save(flags);

	buf->mcptr_cpu = dma_alloc_coherent(NULL, SIZE_OF_MICRO_CODES, &buf->mcptr, GFP_ATOMIC);

	if (buf->mcptr_cpu == NULL) {
		printk(KERN_ERR "%s: failed to allocate memory for micro codes\n", __FUNCTION__);
		return -ENOMEM;
	}

	if (chan->curr == NULL) {
		/* we've got nothing loaded... */
		pr_debug("%s: buffer %p queued onto empty channel\n", __FUNCTION__, buf);

		chan->curr = buf;
		chan->end = buf;
		chan->next = NULL;
	} else {
		pr_debug("dma CH %d: %s: buffer %p queued onto non-empty channel\n",
			 chan->number, __FUNCTION__, buf);

		if (chan->end == NULL)   /* In case of flushing */
			pr_debug("dma CH %d: %s: %p not empty, and chan->end==NULL?\n",
				 chan->number, __FUNCTION__, chan);
		else {
			chan->end->next = buf;
			chan->end = buf;
		}
	}

	/* if necessary, update the next buffer field */
	if (chan->next == NULL)
		chan->next = buf;

	/* check to see if we can load a buffer */
	if (chan->state == S3C_DMA_RUNNING) {
		if (chan->load_state == S3C_DMALOAD_1LOADED && 1) {
			if (s3c_dma_waitforload(chan, __LINE__) == 0) {
				printk(KERN_ERR "dma CH %d: loadbuffer:"
				       "timeout loading buffer\n", chan->number);
				dbg_showchan(chan);
				local_irq_restore(flags);
				return -EINVAL;
			}
		}

	} else if (chan->state == S3C_DMA_IDLE) {
		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
			s3c2410_dma_ctrl(channel, S3C2410_DMAOP_START);
		} else {
			pr_debug("loading onto stopped channel\n");
		}
	}

	local_irq_restore(flags);
	return 0;
}

开发者ID:illyah，项目名称:samsung_kernel_volans，代码行数:95，代码来源:dma-pl330.c

示例13: s3c_dma_started

static inline int s3c_dma_started(unsigned ch)
{
	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
}

开发者ID:badwtg1111，项目名称:linux-2.6，代码行数:4，代码来源:s3c-dma-ops.c

示例14: s3c_dma_irq


//.........这里部分代码省略.........
				 * ensure we do not wait around too long for the DMA
				 * engine to start the next transfer
				 */

				chan->load_state = S3C_DMALOAD_1LOADED;
				break;

			case S3C_DMALOAD_NONE:
				printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
				       chan->number);
				break;

			default:
				printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
				       chan->number, chan->load_state);
				break;
			}

			if (buf != NULL) {
				/* update the chain to make sure that if we load any more
				 * buffers when we call the callback function, things should
				 * work properly */

				chan->curr = buf->next;
				buf->next = NULL;

				if (buf->magic != BUF_MAGIC) {
					printk(KERN_ERR "dma CH %d: %s: buf %p incorrect magic\n",
					       chan->number, __FUNCTION__, buf);
					goto next_channel;
				}

				s3c_dma_buffdone(chan, buf, S3C2410_RES_OK);

				/* free resouces */
				s3c_dma_freebuf(buf);
			} else {
			}

			/* only reload if the channel is still running... our buffer done
	 		* routine may have altered the state by requesting the dma channel
			* to stop or shutdown... */

			if (chan->next != NULL && chan->state != S3C_DMA_IDLE) {
				unsigned long flags;

				switch (chan->load_state) {
				case S3C_DMALOAD_1RUNNING:
					/* don't need to do anything for this state */
					break;

				case S3C_DMALOAD_NONE:
					/* can load buffer immediately */
					break;

				case S3C_DMALOAD_1LOADED:
					if (s3c_dma_waitforload(chan, __LINE__) == 0) {
						/* flag error? */
						printk(KERN_ERR "dma CH %d: timeout waiting for load\n",
						       chan->number);
						goto next_channel;
					}

					break;

				case S3C_DMALOAD_1LOADED_1RUNNING:
					goto next_channel;

				default:
					printk(KERN_ERR "dma CH %d: unknown load_state in irq, %d\n",
					       chan->number, chan->load_state);
					goto next_channel;
				}

				local_irq_save(flags);
				s3c_dma_loadbuffer(chan, chan->next);
				start_DMA_channel(dma_regaddr(chan->dma_con, S3C_DMAC_DBGSTATUS), chan->number,
								chan->curr->mcptr, PL330_NON_SECURE_DMA);

				local_irq_restore(flags);

			} else {
				s3c_dma_lastxfer(chan);

				/* see if we can stop this channel.. */
				if (chan->load_state == S3C_DMALOAD_NONE) {
					pr_debug("# DMA CH %d - (index:%d): end of transfer, stopping channel (%ld)\n",
						 chan->number, chan->index, jiffies);
					s3c2410_dma_ctrl(chan->index | DMACH_LOW_LEVEL, S3C2410_DMAOP_STOP);
				}
			}
			s3c_clear_interrupts(chan->dma_con->number, chan->number);

		}
next_channel:
		tmp >>= 1;
	}

	return IRQ_HANDLED;
}

开发者ID:illyah，项目名称:samsung_kernel_volans，代码行数:101，代码来源:dma-pl330.c

示例15: s3c_dma_flush

static inline int s3c_dma_flush(unsigned ch)
{
	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
}

开发者ID:badwtg1111，项目名称:linux-2.6，代码行数:4，代码来源:s3c-dma-ops.c

示例16: s3c2412_i2s_trigger

static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
			       struct snd_soc_dai *dai)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai);
	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
	unsigned long irqs;
	int ret = 0;
	struct s3c_dma_params *dma_data =
		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);

	pr_debug("Entered %s\n", __func__);

	switch (cmd) {
	case SNDRV_PCM_TRIGGER_START:
		/* On start, ensure that the FIFOs are cleared and reset. */

		writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH,
		       i2s->regs + S3C2412_IISFIC);

		/* clear again, just in case */
		writel(0x0, i2s->regs + S3C2412_IISFIC);

	case SNDRV_PCM_TRIGGER_RESUME:
	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
		if (!i2s->master) {
			ret = s3c2412_snd_lrsync(i2s);
			if (ret)
				goto exit_err;
		}

		local_irq_save(irqs);

		if (capture)
			s3c2412_snd_rxctrl(i2s, 1);
		else
			s3c2412_snd_txctrl(i2s, 1);

		local_irq_restore(irqs);

		/*
		 * Load the next buffer to DMA to meet the reqirement
		 * of the auto reload mechanism of S3C24XX.
		 * This call won't bother S3C64XX.
		 */
		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);

		break;

	case SNDRV_PCM_TRIGGER_STOP:
	case SNDRV_PCM_TRIGGER_SUSPEND:
	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
		local_irq_save(irqs);

		if (capture)
			s3c2412_snd_rxctrl(i2s, 0);
		else
			s3c2412_snd_txctrl(i2s, 0);

		local_irq_restore(irqs);
		break;
	default:
		ret = -EINVAL;
		break;
	}

exit_err:
	return ret;
}

开发者ID:1yankeedt，项目名称:D710BST_FL24_Kernel，代码行数:69，代码来源:s3c-i2s-v2.c

示例17: s3c_dma_stop

static inline int s3c_dma_stop(unsigned ch)
{
	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
}

开发者ID:badwtg1111，项目名称:linux-2.6，代码行数:4，代码来源:s3c-dma-ops.c

示例18: s3c2410_dma_irq


//.........这里部分代码省略.........
        break;

    case S3C2410_DMALOAD_1LOADED_1RUNNING:
        /* we'll worry about checking to see if another buffer is
         * ready after we've called back the owner. This should
         * ensure we do not wait around too long for the DMA
         * engine to start the next transfer
         */

        chan->load_state = S3C2410_DMALOAD_1LOADED;
        break;

    case S3C2410_DMALOAD_NONE:
        printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
               chan->number);
        break;

    default:
        printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
               chan->number, chan->load_state);
        break;
    }

    if (buf != NULL) {
        /* update the chain to make sure that if we load any more
         * buffers when we call the callback function, things should
         * work properly */

        chan->curr = buf->next;
        buf->next  = NULL;

        if (buf->magic != BUF_MAGIC) {
            printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
                   chan->number, __func__, buf);
            return IRQ_HANDLED;
        }

        s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);

        /* free resouces */
        s3c2410_dma_freebuf(buf);
    } else {
    }

    /* only reload if the channel is still running... our buffer done
     * routine may have altered the state by requesting the dma channel
     * to stop or shutdown... */

    /* todo: check that when the channel is shut-down from inside this
     * function, we cope with unsetting reload, etc */

    if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
        unsigned long flags;

        switch (chan->load_state) {
        case S3C2410_DMALOAD_1RUNNING:
            /* don't need to do anything for this state */
            break;

        case S3C2410_DMALOAD_NONE:
            /* can load buffer immediately */
            break;

        case S3C2410_DMALOAD_1LOADED:
            if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
                /* flag error? */
                printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
                       chan->number, __func__);
                return IRQ_HANDLED;
            }

            break;

        case S3C2410_DMALOAD_1LOADED_1RUNNING:
            goto no_load;

        default:
            printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
                   chan->number, chan->load_state);
            return IRQ_HANDLED;
        }

        local_irq_save(flags);
        s3c2410_dma_loadbuffer(chan, chan->next);
        local_irq_restore(flags);
    } else {
        s3c2410_dma_lastxfer(chan);

        /* see if we can stop this channel.. */
        if (chan->load_state == S3C2410_DMALOAD_NONE) {
            pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
                     chan->number, jiffies);
            s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
                             S3C2410_DMAOP_STOP);
        }
    }

no_load:
    return IRQ_HANDLED;
}

开发者ID:antonywcl，项目名称:AR-5315u_PLD，代码行数:101，代码来源:dma.c

示例19: finalize_request

static void finalize_request(struct s3cmci_host *host)
{
	struct mmc_request *mrq = host->mrq;
	struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
	int debug_as_failure = 0;

	if (host->complete_what != COMPLETION_FINALIZE)
		return;

	if (!mrq)
		return;

	if (cmd->data && (cmd->error == 0) &&
	    (cmd->data->error == 0)) {
		if (host->dodma && (!host->dma_complete)) {
			dbg(host, dbg_dma, "DMA Missing!\n");
			return;
		}
	}

	/* Read response from controller. */
	cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
	cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
	cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
	cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);

	writel(host->prescaler, host->base + S3C2410_SDIPRE);

	if (cmd->error)
		debug_as_failure = 1;

	if (cmd->data && cmd->data->error)
		debug_as_failure = 1;

	dbg_dumpcmd(host, cmd, debug_as_failure);

	/* Cleanup controller */
	writel(0, host->base + S3C2410_SDICMDARG);
	writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
	writel(0, host->base + S3C2410_SDICMDCON);
	writel(0, host->base + host->sdiimsk);

	if (cmd->data && cmd->error)
		cmd->data->error = cmd->error;

	if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
		host->cmd_is_stop = 1;
		s3cmci_send_request(host->mmc);
		return;
	}

	/* If we have no data transfer we are finished here */
	if (!mrq->data)
		goto request_done;

	/* Calulate the amout of bytes transfer if there was no error */
	if (mrq->data->error == 0) {
		mrq->data->bytes_xfered =
			(mrq->data->blocks * mrq->data->blksz);
	} else {
		mrq->data->bytes_xfered = 0;
	}

	/* If we had an error while transfering data we flush the
	 * DMA channel and the fifo to clear out any garbage. */
	if (mrq->data->error != 0) {
		if (host->dodma)
			s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);

		if (host->is2440) {
			/* Clear failure register and reset fifo. */
			writel(S3C2440_SDIFSTA_FIFORESET |
			       S3C2440_SDIFSTA_FIFOFAIL,
			       host->base + S3C2410_SDIFSTA);
		} else {
			u32 mci_con;

			/* reset fifo */
			mci_con = readl(host->base + S3C2410_SDICON);
			mci_con |= S3C2410_SDICON_FIFORESET;

			writel(mci_con, host->base + S3C2410_SDICON);
		}
	}

request_done:
	host->complete_what = COMPLETION_NONE;
	host->mrq = NULL;
	mmc_request_done(host->mmc, mrq);
}

开发者ID:maraz，项目名称:linux-2.6，代码行数:90，代码来源:s3cmci.c

注：本文中的s3c2410_dma_ctrl函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ s3c2410_gpio_cfgpin函数代码示例发布时间：2022-05-30

C++ s390_env_get_cpu函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17953|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8508|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ s3c2410_dma_ctrl函数代码示例

示例1: s3c_dma_trigger

示例2: s3c_audio_suspend

示例3: s3c2410_dma_flush

示例4: s3c24xx_pcm_prepare

示例5: s3c24xx_i2s_trigger

示例6: s3c2410_dma_free

示例7: s3c_dma_prepare

示例8: s3c2410_dma_flush

示例9: s3c_mem_ioctl

示例10: s3c_dma_trigger

示例11: s3c2410_dma_enqueue

示例12: s3c2410_dma_enqueue

示例13: s3c_dma_started

示例14: s3c_dma_irq

示例15: s3c_dma_flush

示例16: s3c2412_i2s_trigger

示例17: s3c_dma_stop

示例18: s3c2410_dma_irq

示例19: finalize_request

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053