本文整理汇总了C++中s3c_i2c0_set_platdata函数的典型用法代码示例。如果您正苦于以下问题：C++ s3c_i2c0_set_platdata函数的具体用法？C++ s3c_i2c0_set_platdata怎么用？C++ s3c_i2c0_set_platdata使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了s3c_i2c0_set_platdata函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: nuri_machine_init
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
nuri_tsp_init();
nuri_power_init();
s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
s5p_fimd0_set_platdata(&nuri_fb_pdata);
nuri_camera_init();
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
开发者ID:Blueprint-Marketing，项目名称:GCG-3.3，代码行数:34，代码来源:mach-nuri.c
示例2: qt2410_machine_init
static void __init qt2410_machine_init(void)
{
s3c_nand_set_platdata(&qt2410_nand_info);
switch (tft_type) {
case 'p': /* production */
qt2410_fb_info.default_display = 1;
break;
case 'b': /* big */
qt2410_fb_info.default_display = 0;
break;
case 's': /* small */
default:
qt2410_fb_info.default_display = 2;
break;
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs"));
gpio_direction_output(S3C2410_GPB(5), 1);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
}
开发者ID:anewkirk，项目名称:AJK，代码行数:30，代码来源:mach-qt2410.c
示例3: nuri_machine_init
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
nuri_tsp_init();
nuri_power_init();
s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
s5p_fimd0_set_platdata(&nuri_fb_pdata);
nuri_camera_init();
nuri_ehci_init();
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
}
开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:26，代码来源:mach-nuri.c
示例4: smdk6410_machine_init
static void __init smdk6410_machine_init(void)
{
unsigned int tmp;
s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
s3c_device_onenand.dev.platform_data = &s3c_onenand_data;
s3c_i2c0_set_platdata(NULL);
#if defined(CONFIG_TOUCHSCREEN_S3C)
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
s3c_adc_set_platdata(&s3c_adc_platform);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
spi_register_board_info(sam_spi_devs, ARRAY_SIZE(sam_spi_devs));
s3c_fimc0_set_platdata(NULL);
s3c_fimc1_set_platdata(NULL);
#ifdef CONFIG_VIDEO_FIMC
//s3c_fimc_reset_camera();
#endif
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
s3c6410_pm_init();
smdk_backlight_register();
}
开发者ID:badwtg1111，项目名称:mylinuxkernel，代码行数:33，代码来源:mach-smdk6410.c
示例5: smdk4x12_machine_init
static void __init smdk4x12_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, smdk4x12_i2c_devs0,
ARRAY_SIZE(smdk4x12_i2c_devs0));
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(1, smdk4x12_i2c_devs1,
ARRAY_SIZE(smdk4x12_i2c_devs1));
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, smdk4x12_i2c_devs3,
ARRAY_SIZE(smdk4x12_i2c_devs3));
s3c_i2c7_set_platdata(NULL);
i2c_register_board_info(7, smdk4x12_i2c_devs7,
ARRAY_SIZE(smdk4x12_i2c_devs7));
samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
samsung_keypad_set_platdata(&smdk4x12_keypad_data);
s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
开发者ID:250bpm，项目名称:linux，代码行数:27，代码来源:mach-smdk4x12.c
示例6: exynos4_smdk4270_power_init
void __init exynos4_smdk4270_power_init(void)
{
s3c_i2c0_set_platdata(NULL);
if (system_rev < 7) {
exynos4_s2m_pdata.regulators = exynos_regulators_rev06;
exynos4_s2m_pdata.num_regulators = ARRAY_SIZE(exynos_regulators_rev06);
exynos4_s2m_pdata.opmode_data = s2mpu01a_opmode_data_rev06;
}
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
#ifdef CONFIG_EXYNOS_THERMAL
s3c_set_platdata(&exynos4270_tmu_data,
sizeof(struct exynos_tmu_platform_data),
&exynos4270_device_tmu);
#endif
#ifdef CONFIG_ARM_EXYNOS3470_BUS_DEVFREQ
s3c_set_platdata(&universial222_qos_mif_pd, sizeof(struct exynos_devfreq_platdata),
&exynos4270_mif_devfreq);
s3c_set_platdata(&universial222_qos_int_pd, sizeof(struct exynos_devfreq_platdata),
&exynos4270_int_devfreq);
#endif
platform_add_devices(smdk4270_power_devices,
ARRAY_SIZE(smdk4270_power_devices));
}
开发者ID:CurtisMJ，项目名称:android_kernel_samsung_kminilte，代码行数:26，代码来源:board-garda-power.c
示例7: universal_machine_init
static void __init universal_machine_init(void)
{
universal_sdhci_init();
s5p_tv_setup();
s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
s5p_fimd0_set_platdata(&universal_lcd_pdata);
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
universal_camera_init();
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
开发者ID:dana，项目名称:linux，代码行数:27，代码来源:mach-universal_c210.c
示例8: nuri_machine_init
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
nuri_tsp_init();
nuri_power_init();
s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&nuri_fb_pdata);
#endif
nuri_camera_init();
nuri_ehci_init();
s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
}
开发者ID:Korn1699，项目名称:linux，代码行数:32，代码来源:mach-nuri.c
示例9: origen_machine_init
static void __init origen_machine_init(void)
{
origen_power_init();
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
/*
* Since sdhci instance 2 can contain a bootable media,
* sdhci instance 0 is registered after instance 2.
*/
s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
origen_ehci_init();
origen_ohci_init();
clk_xusbxti.rate = 24000000;
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_fimd0_set_platdata(&origen_lcd_pdata);
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
origen_bt_setup();
}
开发者ID:Jackeagle，项目名称:android_kernel_sony_c2305，代码行数:29，代码来源:mach-origen.c
示例10: vstms_init
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&vstms_nand_info);
platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
}
开发者ID:8563，项目名称:millennium-sources，代码行数:7，代码来源:mach-vstms.c
示例11: omnia_II_machine_init
static void __init omnia_II_machine_init(void)
{
// system_rev = 0x20;
s3c_config_gpio_table(ARRAY_SIZE(omnia_II_init_gpio_table),
omnia_II_init_gpio_table);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_ts_set_platdata(&s3c_ts_platform);
init_spi();
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
i2c_register_board_info(3, i2c_devs3, ARRAY_SIZE(i2c_devs3));
s3c6410_add_mem_devices (&pmem_setting);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
s3c6410_pm_init();
omnia_II_set_qos();
s3c6410_wdt_io_map();
omnia_II_switch_init();
wake_lock_init(&wlan_wakelock, WAKE_LOCK_SUSPEND, "wlan");
}
开发者ID:kgp700，项目名称:omnia2-android-26329，代码行数:28，代码来源:omnia_II.c
示例12: smdkv210_machine_init
static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkv210_i2c_devs0,
ARRAY_SIZE(smdkv210_i2c_devs0));
i2c_register_board_info(1, smdkv210_i2c_devs1,
ARRAY_SIZE(smdkv210_i2c_devs1));
i2c_register_board_info(2, smdkv210_i2c_devs2,
ARRAY_SIZE(smdkv210_i2c_devs2));
s3c_ide_set_platdata(&smdkv210_ide_pdata);
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
开发者ID:GerardGarcia，项目名称:linux，代码行数:27，代码来源:mach-smdkv210.c
示例13: smdkc100_machine_init
static void __init smdkc100_machine_init(void)
{
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
s3c_ide_set_platdata(&smdkc100_ide_pdata);
samsung_keypad_set_platdata(&smdkc100_keypad_data);
s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
/* LCD init */
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:25，代码来源:mach-smdkc100.c
示例14: bast_map_io
static void __init bast_map_io(void)
{
/* initialise the clocks */
s3c24xx_dclk0.parent = &clk_upll;
s3c24xx_dclk0.rate = 12*1000*1000;
s3c24xx_dclk1.parent = &clk_upll;
s3c24xx_dclk1.rate = 24*1000*1000;
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
usb_simtec_init();
}
开发者ID:jakev，项目名称:CobraDroidBeta，代码行数:27，代码来源:mach-bast.c
示例15: h1940_init
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
| (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
| (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}
开发者ID:1plus4，项目名称:ev3sources，代码行数:30，代码来源:mach-h1940.c
示例16: universal_machine_init
static void __init universal_machine_init(void)
{
universal_sdhci_init();
s5p_tv_setup();
s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&universal_lcd_pdata);
#endif
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
s3c_hsotg_set_platdata(&universal_hsotg_pdata);
universal_camera_init();
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
开发者ID:Afek，项目名称:linux，代码行数:33，代码来源:mach-universal_c210.c
示例17: smdk6410_machine_init
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
// s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
//jkeqiang
s3c_nand_set_platdata(&ok6410_nand_info);
s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
//gpio_request(S3C64XX_GPN(5), "LCD power");
//gpio_request(S3C64XX_GPF(13), "LCD power");
//gpio_request(S3C64XX_GPF(15), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&smdk6410_ide_pdata);
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
开发者ID:IoveSunny，项目名称:DreamBox，代码行数:59，代码来源:mach-ok6410.c
示例18: smdk2440_machine_init
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
smdk_machine_init();
}
开发者ID:12019，项目名称:linux-2.6.34-ts471x，代码行数:8，代码来源:mach-smdk2440.c
示例19: anubis_init
static void __init anubis_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
i2c_register_board_info(0, anubis_i2c_devs,
ARRAY_SIZE(anubis_i2c_devs));
}
开发者ID:jakev，项目名称:CobraDroidBeta，代码行数:8，代码来源:mach-anubis.c
示例20: at2440evb_init
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
s3c_nand_set_platdata(&at2440evb_nand_info);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
}
开发者ID:71eh，项目名称:open80211s，代码行数:9，代码来源:mach-at2440evb.c
注：本文中的s3c_i2c0_set_platdata函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论