C++ s3c_sdhci0_set_platdata函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中s3c_sdhci0_set_platdata函数的典型用法代码示例。如果您正苦于以下问题：C++ s3c_sdhci0_set_platdata函数的具体用法？C++ s3c_sdhci0_set_platdata怎么用？C++ s3c_sdhci0_set_platdata使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了s3c_sdhci0_set_platdata函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: origen_machine_init

static void __init origen_machine_init(void)
{
	origen_power_init();

	s3c_i2c0_set_platdata(NULL);
	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));

	/*
	 * Since sdhci instance 2 can contain a bootable media,
	 * sdhci instance 0 is registered after instance 2.
	 */
	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);

	origen_ehci_init();
	origen_ohci_init();
	clk_xusbxti.rate = 24000000;

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	s5p_fimd0_set_platdata(&origen_lcd_pdata);

	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));

	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);

	origen_bt_setup();
}

开发者ID:Jackeagle，项目名称:android_kernel_sony_c2305，代码行数:29，代码来源:mach-origen.c

示例2: smdkv310_machine_init

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
#ifdef CONFIG_DRM_EXYNOS
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
#endif

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	clk_xusbxti.rate = 24000000;

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

开发者ID:250bpm，项目名称:linux，代码行数:31，代码来源:mach-smdkv310.c

示例3: smdkv310_machine_init

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	clk_xusbxti.rate = 24000000;

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

开发者ID:DamonDeng，项目名称:linux，代码行数:26，代码来源:mach-smdkv310.c

示例4: s3c_sdhci_set_platdata

void s3c_sdhci_set_platdata(void)
{
#if defined(CONFIG_S3C_DEV_HSMMC)
	s3c_sdhci0_set_platdata(&hsmmc0_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC1)
	if (machine_is_aries())
		hsmmc1_platdata.built_in = 1;
	s3c_sdhci1_set_platdata(&hsmmc1_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC2)
	if (machine_is_herring()) {
		hsmmc2_platdata.ext_cd = IRQ_EINT(28);
		hsmmc2_platdata.cfg_ext_cd = universal_sdhci2_cfg_ext_cd;
		hsmmc2_platdata.detect_ext_cd = universal_sdhci2_detect_ext_cd;
	}
        if (machine_is_aries()) {
		hsmmc2_platdata.ext_cd = IRQ_EINT(28);
		hsmmc2_platdata.cfg_ext_cd = universal_sdhci2_cfg_ext_cd;
		hsmmc2_platdata.detect_ext_cd = universal_sdhci2_detect_ext_cd;
	}

	s3c_sdhci2_set_platdata(&hsmmc2_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC3)
	if (machine_is_herring())
		hsmmc3_platdata.built_in = 1;
	s3c_sdhci3_set_platdata(&hsmmc3_platdata);
        if (machine_is_aries())
		hsmmc3_platdata.built_in = 1;
	s3c_sdhci3_set_platdata(&hsmmc3_platdata);
#endif
};

开发者ID:explodingboy70，项目名称:android_kernel_samsung_aries，代码行数:33，代码来源:setup-sdhci.c

示例5: smdk6410_machine_init

static void __init smdk6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
//	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk6410_lcd_pdata);

//jkeqiang	
	s3c_nand_set_platdata(&ok6410_nand_info);

	s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);

	samsung_keypad_set_platdata(&smdk6410_keypad_data);

//	s3c24xx_ts_set_platdata(&s3c_ts_platform);
	s3c_ts_set_platdata(&s3c_ts_platform);

	s3c64xx_ac97_setup_gpio(0);
	/* configure nCS1 width to 16 bits */

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	/* set timing for nCS1 suitable for ethernet chip */

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	//gpio_request(S3C64XX_GPN(5), "LCD power");
	//gpio_request(S3C64XX_GPF(13), "LCD power");
	//gpio_request(S3C64XX_GPF(15), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_ide_set_platdata(&smdk6410_ide_pdata);

#ifdef CONFIG_S3C64XX_DEV_FIMC0
	s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
	s3c_fimc1_set_platdata(NULL);
#endif


	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}

开发者ID:IoveSunny，项目名称:DreamBox，代码行数:59，代码来源:mach-ok6410.c

示例6: aquila_setup_sdhci

static void aquila_setup_sdhci(void)
{
	gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");

	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};

开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:8，代码来源:mach-aquila.c

示例7: s3c_sdhci_set_platdata

void s3c_sdhci_set_platdata(void)
{
#if defined(CONFIG_S3C_DEV_HSMMC)
	s3c_sdhci0_set_platdata(&hsmmc0_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC2)
	s3c_sdhci2_set_platdata(&hsmmc2_platdata);
#endif
};

开发者ID:jdlfg，项目名称:fascinate-kernel，代码行数:9，代码来源:setup-sdhci.c

示例8: aquila_setup_sdhci

static void aquila_setup_sdhci(void)
{
	gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
	gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);

	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};

开发者ID:123456798wil，项目名称:kernel_dell_streak7，代码行数:9，代码来源:mach-aquila.c

示例9: smdkc210_machine_init

static void __init smdkc210_machine_init(void)
{
	smdkc210_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);

	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
}

开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:11，代码来源:mach-smdkc210.c

示例10: s3c_sdhci_set_platdata

void s3c_sdhci_set_platdata(void)
{
#if defined(CONFIG_S3C_DEV_HSMMC)
	if (machine_is_herring() || machine_is_aries() || machine_is_venturi()) { /* TODO: move to mach-herring.c */
		hsmmc0_platdata.cd_type = S3C_SDHCI_CD_PERMANENT;
	}
	s3c_sdhci0_set_platdata(&hsmmc0_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC1)
	if (machine_is_aries()) {
		hsmmc1_platdata.cd_type = S3C_SDHCI_CD_EXTERNAL;
		hsmmc1_platdata.ext_cd_init = ext_cd_init_hsmmc1;
		hsmmc1_platdata.ext_cd_cleanup = ext_cd_cleanup_hsmmc1;
		hsmmc1_platdata.built_in = 1;
	}
	s3c_sdhci1_set_platdata(&hsmmc1_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC2)
	if (machine_is_herring()) {
		if (herring_is_cdma_wimax_dev()) {
			hsmmc2_platdata.cd_type = S3C_SDHCI_CD_EXTERNAL;
			hsmmc2_platdata.ext_cd_init = ext_cd_init_hsmmc2;
			hsmmc2_platdata.ext_cd_cleanup = ext_cd_cleanup_hsmmc2;
			hsmmc2_platdata.built_in = 1;
			hsmmc2_platdata.must_maintain_clock = 1;
			hsmmc2_platdata.enable_intr_on_resume = 1;
		} else {
			hsmmc2_platdata.cd_type = S3C_SDHCI_CD_GPIO;
			hsmmc2_platdata.ext_cd_gpio = S5PV210_GPH3(4);
			hsmmc2_platdata.ext_cd_gpio_invert = true;
			universal_sdhci2_cfg_ext_cd();
		}
	}

	if (machine_is_aries() || machine_is_venturi()) {
		hsmmc2_platdata.cd_type = S3C_SDHCI_CD_GPIO;
		hsmmc2_platdata.ext_cd_gpio = S5PV210_GPH3(4);
		hsmmc2_platdata.ext_cd_gpio_invert = true;
		universal_sdhci2_cfg_ext_cd();
	}

	s3c_sdhci2_set_platdata(&hsmmc2_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC3)
	if (machine_is_herring() || machine_is_aries() || machine_is_venturi()) {
		hsmmc3_platdata.cd_type = S3C_SDHCI_CD_EXTERNAL;
		hsmmc3_platdata.ext_cd_init = ext_cd_init_hsmmc3;
		hsmmc3_platdata.ext_cd_cleanup = ext_cd_cleanup_hsmmc3;
		hsmmc3_platdata.built_in = 1;
	}
	s3c_sdhci3_set_platdata(&hsmmc3_platdata);
#endif
};

开发者ID:Meticulus，项目名称:nutella_kernel_samsung_venturi，代码行数:53，代码来源:setup-sdhci.c

示例11: smdkc210_machine_init

static void __init smdkc210_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkc210_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);

	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
}

开发者ID:007kumarraja，项目名称:rockchip-rk3188-mk908，代码行数:14，代码来源:mach-smdkc210.c

示例12: s3c_sdhci_set_platdata

void s3c_sdhci_set_platdata(void)
{
#if defined(CONFIG_S3C_DEV_HSMMC)
	s3c_sdhci0_set_platdata(&hsmmc0_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC2)
	hsmmc2_platdata.ext_cd = IRQ_EINT(28);
	hsmmc2_platdata.cfg_ext_cd = universal_sdhci2_cfg_ext_cd;
	hsmmc2_platdata.detect_ext_cd = universal_sdhci2_detect_ext_cd;

	s3c_sdhci2_set_platdata(&hsmmc2_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC3)
	hsmmc3_platdata.built_in = 1;
	s3c_sdhci3_set_platdata(&hsmmc3_platdata);
#endif
};

开发者ID:Dylan00，项目名称:YP_GB70，代码行数:17，代码来源:setup-sdhci.c

示例13: s3c_sdhci_set_platdata

void s3c_sdhci_set_platdata(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
#if defined (CONFIG_TARGET_LOCALE_EUR) || defined(CONFIG_TARGET_LOCALE_HKTW) || defined (CONFIG_TARGET_LOCALE_HKTW_FET) || defined(CONFIG_TARGET_LOCALE_VZW) || defined(CONFIG_TARGET_LOCALE_USAGSM)
	if (HWREV < 12)
#elif CONFIG_TARGET_LOCALE_KOR
	if (HWREV < 10 || HWREV == 17)
#endif /* CONFIG_TARGET_LOCALE */
	{
		hsmmc0_platdata.max_width = 4,
		hsmmc0_platdata.host_caps &= ~MMC_CAP_8_BIT_DATA;
	}
	s3c_sdhci0_set_platdata(&hsmmc0_platdata);
#endif /* CONFIG_S3C_DEV_HSMMC */

#ifdef CONFIG_S3C_DEV_HSMMC2
	s3c_sdhci2_set_platdata(&hsmmc2_platdata);
#endif /* CONFIG_S3C_DEV_HSMMC2 */
};

开发者ID:xxSynGatesA7Xxx，项目名称:sgtkernel_tmobile，代码行数:19，代码来源:setup-sdhci.c

示例14: crag6410_machine_init

static void __init crag6410_machine_init(void)
{
	/* Open drain IRQs need pullups */
	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);

	gpio_request(S3C64XX_GPB(0), "LCD power");
	gpio_direction_output(S3C64XX_GPB(0), 0);

	gpio_request(S3C64XX_GPF(14), "LCD PWM");
	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */

	gpio_request(S3C64XX_GPB(1), "SD power");
	gpio_direction_output(S3C64XX_GPB(1), 0);

	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
	gpio_direction_output(S3C64XX_GPF(10), 1);

	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);

	s3c_i2c0_set_platdata(&i2c0_pdata);
	s3c_i2c1_set_platdata(&i2c1_pdata);
	s3c_fb_set_platdata(&crag6410_lcd_pdata);
	dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	samsung_keypad_set_platdata(&crag6410_keypad_data);
	s3c64xx_spi0_set_platdata(NULL, 0, 2);

	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));

	gpio_led_register_device(-1, &gpio_leds_pdata);

	regulator_has_full_constraints();

	s3c64xx_pm_init();
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:41，代码来源:mach-crag6410.c

示例15: jet_machine_init

static void __init jet_machine_init(void)
{
	s3c_pm_init();

	s3c_init_gpio(jet_gpio_table, ARRAY_SIZE(jet_gpio_table));

	/* Register I2C devices */
	s3c_i2c0_set_platdata(&jet_misc_i2c);
	i2c_register_board_info(jet_misc_i2c.bus_num, jet_misc_i2c_devs,
					ARRAY_SIZE(jet_misc_i2c_devs));
	s3c_i2c1_set_platdata(&jet_cam_i2c);
	i2c_register_board_info(jet_cam_i2c.bus_num, jet_cam_i2c_devs,
					ARRAY_SIZE(jet_cam_i2c_devs));
	i2c_register_board_info(jet_pmic_i2c.id, jet_pmic_i2c_devs,
					ARRAY_SIZE(jet_pmic_i2c_devs));
	i2c_register_board_info(jet_audio_i2c.id, jet_audio_i2c_devs,
					ARRAY_SIZE(jet_audio_i2c_devs));
	i2c_register_board_info(jet_touch_i2c.id, jet_touch_i2c_devs,
					ARRAY_SIZE(jet_touch_i2c_devs));

	s3c_fb_set_platdata(&jet_lcd_pdata);

	s3c_sdhci0_set_platdata(&jet_hsmmc0_pdata);
	s3c_sdhci2_set_platdata(&jet_hsmmc2_pdata);

	samsung_keypad_set_platdata(&jet_keypad_pdata);

	s3c_set_platdata(&jet_onenand_pdata, sizeof(jet_onenand_pdata),
							&s3c_device_onenand);

	/* Register platform devices */
	platform_add_devices(jet_devices, ARRAY_SIZE(jet_devices));
	platform_add_devices(jet_mod_devices, ARRAY_SIZE(jet_mod_devices));

#ifdef CONFIG_ANDROID_PMEM
	/* Register PMEM devices */
	jet_add_mem_devices();
#endif

	regulator_has_full_constraints();
}

开发者ID:MadRocker，项目名称:Tom3Q-2.6.38-Jet-convert，代码行数:41，代码来源:mach-gt_s8000.c

示例16: smdk6440_machine_init

static void __init smdk6440_machine_init(void)
{
	s3c24xx_ts_set_platdata(NULL);

	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
	i2c_register_board_info(0, smdk6440_i2c_devs0,
			ARRAY_SIZE(smdk6440_i2c_devs0));
	i2c_register_board_info(1, smdk6440_i2c_devs1,
			ARRAY_SIZE(smdk6440_i2c_devs1));

	s5p6440_set_lcd_interface();
	s3c_fb_set_platdata(&smdk6440_lcd_pdata);

	s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);

	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));

	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
}

开发者ID:01org，项目名称:KVMGT-kernel，代码行数:22，代码来源:mach-smdk6440.c

示例17: smdk2416_machine_init

static void __init smdk2416_machine_init(void)
{
	s3c_i2c0_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk2416_fb_platdata);

	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);

	s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);

	gpio_request(S3C2410_GPB(4), "USBHost Power");
	gpio_direction_output(S3C2410_GPB(4), 1);

	gpio_request(S3C2410_GPB(3), "Display Power");
	gpio_direction_output(S3C2410_GPB(3), 1);

	gpio_request(S3C2410_GPB(1), "Display Reset");
	gpio_direction_output(S3C2410_GPB(1), 1);

	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
	smdk_machine_init();
}

开发者ID:08opt，项目名称:linux，代码行数:22，代码来源:mach-smdk2416.c

示例18: origen_machine_init

static void __init origen_machine_init(void)
{
	origen_power_init();

	s3c_i2c0_set_platdata(NULL);
	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));

	/*
	 * Since sdhci instance 2 can contain a bootable media,
	 * sdhci instance 0 is registered after instance 2.
	 */
	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);

	origen_ehci_init();
	origen_ohci_init();
	s3c_hsotg_set_platdata(&origen_hsotg_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);
	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);

#ifdef CONFIG_DRM_EXYNOS_FIMD
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&origen_lcd_pdata);
#endif

	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));

	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);

	origen_bt_setup();
}

开发者ID:0x000000FF，项目名称:Linux4Edison，代码行数:36，代码来源:mach-origen.c

示例19: smdk4210_machine_init

static void __init smdk4210_machine_init(void)
{
	c1_config_gpio_table();
	c1_config_sleep_gpio_table();
	
	s3c_pm_init();
	
	s3c_gpio_cfgpin(GPIO_WLAN_EN, S3C_GPIO_OUTPUT);
	s3c_gpio_setpull(GPIO_WLAN_EN, S3C_GPIO_PULL_NONE);
	
	exynos4_pd_enable(&exynos4_device_pd[PD_MFC].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_G3D].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_LCD0].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_LCD1].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_CAM].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_TV].dev);
	
	/* SROMC Setup */
	/* TODO: Move me to a separate function */
	/*u32 tmp;

	tmp = __raw_readl(S5P_SROM_BW);
	tmp &= ~(0xffff);
	tmp |= (0x9999);
	__raw_writel(tmp, S5P_SROM_BW);

	__raw_writel(0xff1ffff1, S5P_SROM_BC1);

	tmp = __raw_readl(S5P_VA_GPIO + 0x120);
	tmp &= ~(0xffffff);
	tmp |= (0x221121);
	__raw_writel(tmp, (S5P_VA_GPIO + 0x120));

	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x180));
	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x1a0));
	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x1c0));
	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x1e0));	*/
	
	/* MMC Card init */
	s3c_gpio_cfgpin(GPIO_MASSMEM_EN, S3C_GPIO_OUTPUT);
	gpio_set_value(GPIO_MASSMEM_EN, GPIO_MASSMEM_EN_LEVEL);
	
	/* 400 kHz for initialization of MMC Card  */
	__raw_writel((__raw_readl(S5P_CLKDIV_FSYS3) & 0xfffffff0)
		     | 0x9, S5P_CLKDIV_FSYS3);
	__raw_writel((__raw_readl(S5P_CLKDIV_FSYS2) & 0xfff0fff0)
		     | 0x80008, S5P_CLKDIV_FSYS2);
	__raw_writel((__raw_readl(S5P_CLKDIV_FSYS1) & 0xfff0fff0)
		     | 0x90009, S5P_CLKDIV_FSYS1);

	/* PLATDATA init */
	s3c_i2c0_set_platdata(NULL);
	/*i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0))*/

	s3c_i2c1_set_platdata(NULL);
	/*i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));*/
	
	smdk4210_init_tsp();
	s3c_i2c3_set_platdata(&i2c3_data);
	i2c_register_board_info(3, i2c_devs3, ARRAY_SIZE(i2c_devs3)); /* TSP */
	
	smdk4210_init_pmic();
	s3c_i2c5_set_platdata(NULL);
	i2c_register_board_info(5, i2c_devs5, ARRAY_SIZE(i2c_devs5));
	
	s3c_i2c6_set_platdata(NULL);
	//i2c_register_board_info(6, i2c_devs6, ARRAY_SIZE(i2c_devs6));

	/*s3c_i2c7_set_platdata(NULL);											TVOUT
	i2c_register_board_info(7, i2c_devs7, ARRAY_SIZE(i2c_devs7));*/
	
	smdk4210_init_touchkey();
	i2c_register_board_info(9, i2c_gpio_gauge_devs, ARRAY_SIZE(i2c_gpio_gauge_devs));
	
	s3cfb_set_platdata(NULL);
	s3c_device_fb.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
	
	s3c_sdhci2_set_platdata(&smdk4210_hsmmc2_pdata);
	s3c_sdhci0_set_platdata(&smdk4210_hsmmc0_pdata);
	s3c_sdhci3_set_platdata(&smdk4210_hsmmc3_pdata);
	s3c_mshci_set_platdata(&smdk4210_mshc_pdata);

	
	s5p_fimg2d_set_platdata(&fimg2d_data);
	s5p_device_fimg2d.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
	
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);

#if 0 /* TVOUT - Will nebkat hax? */
	s5p_hdmi_hpd_set_platdata(&hdmi_hpd_data);
	s5p_hdmi_cec_set_platdata(&hdmi_cec_data);
	s5p_device_tvout.dev.parent = &exynos4_device_pd[PD_TV].dev;
#endif
	

	smdk4210_otg_init();
	smdk4210_ohci_init();
//.........这里部分代码省略.........

开发者ID:MaxLustig，项目名称:android_kernel_samsung_galaxys2，代码行数:101，代码来源:mach-smdk4210.c

示例20: universal_sdhci_init

static void __init universal_sdhci_init(void)
{
	s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
	s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}

开发者ID:dana，项目名称:linux，代码行数:6，代码来源:mach-universal_c210.c

注：本文中的s3c_sdhci0_set_platdata函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ s3c_sdhci2_set_platdata函数代码示例发布时间：2022-05-30

C++ s3c_rtc_enable函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17953|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8508|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9303|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7807|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ s3c_sdhci0_set_platdata函数代码示例

示例1: origen_machine_init

示例2: smdkv310_machine_init

示例3: smdkv310_machine_init

示例4: s3c_sdhci_set_platdata

示例5: smdk6410_machine_init

示例6: aquila_setup_sdhci

示例7: s3c_sdhci_set_platdata

示例8: aquila_setup_sdhci

示例9: smdkc210_machine_init

示例10: s3c_sdhci_set_platdata

示例11: smdkc210_machine_init

示例12: s3c_sdhci_set_platdata

示例13: s3c_sdhci_set_platdata

示例14: crag6410_machine_init

示例15: jet_machine_init

示例16: smdk6440_machine_init

示例17: smdk2416_machine_init

示例18: origen_machine_init

示例19: smdk4210_machine_init

示例20: universal_sdhci_init

请发表评论

全部评论

上一篇：

下一篇：

Delphi设计模式：《HeadFirst设计模式》Del

GaloyMoney/galoy-mobile

swcarpentry/matlab-novice-inflammation:

美国三一学院字怎么样？专业特色有哪些？

Twzy/MarkWord: a markdown editer

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053