C++ sSave函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sSave函数的典型用法代码示例。如果您正苦于以下问题：C++ sSave函数的具体用法？C++ sSave怎么用？C++ sSave使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sSave函数的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: XDialog

voucherItemDistrib::voucherItemDistrib(QWidget* parent, const char* name, bool modal, Qt::WFlags fl)
  : XDialog(parent, name, modal, fl)
{
  setupUi(this);

  connect(_costelem, SIGNAL(newID(int)), this, SLOT(sCheck()));
  connect(_save, SIGNAL(clicked()), this, SLOT(sSave()));
  connect(_close, SIGNAL(clicked()), this, SLOT(reject()));

  _costelem->populate( QString( "SELECT costelem_id, costelem_type, 1 AS orderby "
                                "FROM costelem "
                                "WHERE (costelem_type='Material') "

                                "UNION SELECT 0, '%1' AS costelem_type, 2 AS orderby "

                                "UNION SELECT costelem_id, costelem_type, 3 AS orderby "
                                "FROM costelem "
                                "WHERE ( (costelem_active)"
                                " AND (NOT costelem_sys)"
                                " AND (costelem_po) ) "
                                "ORDER BY orderby, costelem_type;" )
                       .arg(tr("None")) );
}

开发者ID:Dinesh-Ramakrishnan，项目名称:qt-client，代码行数:23，代码来源:voucherItemDistrib.cpp

示例2: connect

void MainWindow::setSingnals()
{
    connect(fileMenuNew, SIGNAL(triggered()), this, SLOT( sNew() ));
    connect(fileMenuOpen, SIGNAL(triggered()), this, SLOT( sOpen() ));
    connect(fileMenuSave, SIGNAL(triggered()), this, SLOT( sSave() ));
    connect(fileMenuQuit, SIGNAL(triggered()), qApp, SLOT(quit() ));
    connect(fileMenuSaveAs, SIGNAL(triggered()), this, SLOT( sSaveAs() ));
    connect(this->ui->send_button, SIGNAL(clicked()), this, SLOT(sSend()));
    //connect(przyklad, SIGNAL(triggered()), this, SLOT( sEg((QString)"przyklad") ));
    connect(Run, SIGNAL(triggered()), this, SLOT( sRun() ));
    connect(Debug, SIGNAL(triggered()), this, SLOT( sDebug() ));
    connect(Stop, SIGNAL(triggered()), this, SLOT( sStop() ));

    connect(Undo, SIGNAL(triggered()), this, SLOT( sUndo() ));
    connect(Redo, SIGNAL(triggered()), this, SLOT( sRedo() ));

    connect(Copy, SIGNAL(triggered()), this, SLOT(sCopy()));
    connect(Cut, SIGNAL(triggered()), this, SLOT(sCut()));
    connect(Paste, SIGNAL(triggered()), this, SLOT(sPaste()));
    connect(toC, SIGNAL(triggered()), this, SLOT(sToC()));
    connect(toJava, SIGNAL(triggered()), this, SLOT(sToJava()));

}

开发者ID:Lisu11，项目名称:BFGUI，代码行数:23，代码来源:mainwindow.cpp

示例3: XDialog

task::task(QWidget* parent, const char* name, bool modal, Qt::WFlags fl)
    : XDialog(parent, name, modal, fl)
{
  setupUi(this);

  connect(_buttonBox, SIGNAL(accepted()), this, SLOT(sSave()));
  connect(_actualExp, SIGNAL(lostFocus()), this, SLOT(sExpensesAdjusted()));
  connect(_budgetExp, SIGNAL(lostFocus()), this, SLOT(sExpensesAdjusted()));
  connect(_actualHours, SIGNAL(lostFocus()), this, SLOT(sHoursAdjusted()));
  connect(_budgetHours, SIGNAL(lostFocus()), this, SLOT(sHoursAdjusted()));
  
  _budgetHours->setValidator(omfgThis->qtyVal());
  _actualHours->setValidator(omfgThis->qtyVal());
  _budgetExp->setValidator(omfgThis->costVal());
  _actualExp->setValidator(omfgThis->costVal());
  _balanceHours->setPrecision(omfgThis->qtyVal());
  _balanceExp->setPrecision(omfgThis->costVal());

  _prjid = -1;
  _prjtaskid = -1;
  
  _owner->setType(UsernameLineEdit::UsersActive);
  _assignedTo->setType(UsernameLineEdit::UsersActive);
}

开发者ID:Wushaowei001，项目名称:xtuple-1，代码行数:24，代码来源:task.cpp

示例4: XDialog

company::company(QWidget* parent, const char* name, bool modal, Qt::WindowFlags fl)
    : XDialog(parent, name, modal, fl)
{
  setupUi(this);

  connect(_extDB,     SIGNAL(editingFinished()), this, SLOT(sHandleTest()));
  connect(_extPort,   SIGNAL(editingFinished()), this, SLOT(sHandleTest()));
  connect(_extServer, SIGNAL(editingFinished()), this, SLOT(sHandleTest()));
  connect(_extTest,   SIGNAL(clicked()), this, SLOT(sTest()));
  connect(_buttonBox, SIGNAL(accepted()), this, SLOT(sSave()));
  connect(_buttonBox, SIGNAL(rejected()), this, SLOT(close()));
  connect(_currency, SIGNAL(newID(int)), this, SLOT(sCurrencyChanged()));

  _number->setMaxLength(_metrics->value("GLCompanySize").toInt());
  _cachedNumber = "";
  _cachedCurrid = CurrCluster::baseId();

  _external->setVisible(_metrics->boolean("MultiCompanyFinancialConsolidation"));
  _authGroup->setVisible(_metrics->boolean("MultiCompanyFinancialConsolidation"));
  _currency->setId(CurrCluster::baseId());
  _unrlzgainloss->setType(GLCluster::cRevenue | GLCluster::cExpense);
  _unrlzgainloss->setShowExternal(true);
  _unrlzgainloss->setIgnoreCompany(true);
  _yearend->setShowExternal(true);
  _yearend->setType(GLCluster::cEquity);
  _yearend->setIgnoreCompany(true);
  _gainloss->setType(GLCluster::cExpense);
  _gainloss->setShowExternal(true);
  _gainloss->setIgnoreCompany(true);
  _discrepancy->setType(GLCluster::cExpense);
  _discrepancy->setShowExternal(true);
  _discrepancy->setIgnoreCompany(true);
  _unassigned->setType(GLCluster::cLiability);
  _unassigned->setShowExternal(true);
  _unassigned->setIgnoreCompany(true);
}

开发者ID:ChristopherCotnoir，项目名称:qt-client，代码行数:36，代码来源:company.cpp

示例5: XDialog

image::image(QWidget* parent, const char* name, bool modal, Qt::WindowFlags fl)
    : XDialog(parent, name, modal, fl)
{
  setupUi(this);

  connect(_fileList, SIGNAL(clicked()), this, SLOT(sFileList()));
  connect(_buttonBox, SIGNAL(rejected()), this, SLOT(reject()));
  connect(_buttonBox, SIGNAL(accepted()), this, SLOT(sSave()));

#ifndef Q_OS_MAC
  _fileList->setMaximumWidth(25);
#endif

  _image = new QLabel();
  _image->setAlignment(Qt::AlignLeft | Qt::AlignTop);
  QScrollArea * scrollArea = new QScrollArea();
  scrollArea->setWidgetResizable(true);
  scrollArea->setAlignment(Qt::AlignLeft | Qt::AlignTop);
  scrollArea->setWidget(_image);
  QHBoxLayout *layout = new QHBoxLayout;
  layout->setMargin(0);
  layout->addWidget(scrollArea);
  _imageFrame->setLayout(layout);
}

开发者ID:ChristopherCotnoir，项目名称:qt-client，代码行数:24，代码来源:image.cpp

示例6: XWidget

bankAdjustment::bankAdjustment(QWidget* parent, const char* name, Qt::WFlags fl)
  : XWidget(parent, name, fl)
{
  setupUi(this);


  // signals and slots connections
  connect(_close, SIGNAL(clicked()), this, SLOT(close()));
  connect(_save, SIGNAL(clicked()), this, SLOT(sSave()));
  connect(_bankaccnt, SIGNAL(newID(int)), this, SLOT(sBankAccount(int)));

  _bankaccnt->populate("SELECT bankaccnt_id,"
                       "       (bankaccnt_name || '-' || bankaccnt_descrip),"
		       "       bankaccnt_name "
                       "FROM bankaccnt "
                       "ORDER BY bankaccnt_name;");
  _bankadjtype->populate("SELECT bankadjtype_id,"
                         "       (bankadjtype_name || '-' || bankadjtype_descrip),"
			 "       bankadjtype_name "
                         "FROM bankadjtype "
                         "ORDER BY bankadjtype_name;");

  _bankadjid = -1;
}

开发者ID:Dinesh-Ramakrishnan，项目名称:qt-client，代码行数:24，代码来源:bankAdjustment.cpp

示例7: QDialog


//.........这里部分代码省略.........
  moreLayout->setContentsMargins(5, 5, 5, 5);
  moreLayout->setSpacing(7);
  moreLayout->setObjectName("moreLayout");

  QHBoxLayout *commentLayout = new QHBoxLayout(this);
  commentLayout->setContentsMargins(5, 5, 5, 5);
  commentLayout->setSpacing(7);
  commentLayout->setObjectName("commentLayout");

  QVBoxLayout *layout11  = new QVBoxLayout(this);
  layout11->setSpacing(5);
  layout11->setObjectName("layout11");

  QHBoxLayout *layout9   = new QHBoxLayout(this);
  layout9->setObjectName("layout9");

  QBoxLayout *layout8    = new QHBoxLayout(this);
  layout8->setSpacing(5);
  layout8->setObjectName("layout8");

  QLabel *_cmnttypeLit = new QLabel(tr("Comment Type:"), this);
  _cmnttypeLit->setObjectName("_cmnttypeLit");
  layout8->addWidget( _cmnttypeLit );

  _cmnttype = new XComboBox( false, this);
  _cmnttype->setObjectName("_cmnttype" );
  layout8->addWidget( _cmnttype );
  layout9->addLayout( layout8 );

  QSpacerItem* spacer = new QSpacerItem( 66, 10, QSizePolicy::Expanding, QSizePolicy::Minimum );
  layout9->addItem( spacer );

  _public = new QCheckBox(tr("Public"), this);
  _public->setObjectName("_public");
  if(!(_x_metrics && _x_metrics->boolean("CommentPublicPrivate")))
    _public->hide();
  _public->setChecked(_x_metrics && _x_metrics->boolean("CommentPublicDefault"));
  layout9->addWidget(_public);
  layout11->addLayout( layout9 );

  _comment = new XTextEdit( this);
  _comment->setObjectName("_comment" );
  _comment->setSpellEnable(true);
  layout11->addWidget( _comment );
  commentLayout->addLayout( layout11 );

  QDialogButtonBox* buttonBox = new QDialogButtonBox(this);
  buttonBox->setOrientation(Qt::Vertical);
  buttonBox->setStandardButtons(QDialogButtonBox::Save | QDialogButtonBox::Cancel);

  _close = buttonBox->button(QDialogButtonBox::Cancel);
  _close->setObjectName("_close");

  _save = buttonBox->button(QDialogButtonBox::Save);
  _save->setObjectName("_save");

  _prev = buttonBox->addButton(tr("&Previous"), QDialogButtonBox::ActionRole);
  _prev->setObjectName("_prev");

  _next = buttonBox->addButton(tr("&Next"), QDialogButtonBox::ActionRole);
  _next->setObjectName("_next");

  _more = buttonBox->addButton(tr("&More"), QDialogButtonBox::ActionRole);
  _more->setObjectName("_more");
  _more->setCheckable(true);

  commentLayout->addWidget(buttonBox);

  moreLayout->addLayout(commentLayout);

  _comments = new Comments(this);
  _comments->setObjectName("_comments");
  _comments->setReadOnly(true);
  _comments->findChild<XCheckBox*>("_verbose")->setForgetful(true);
  _comments->findChild<XCheckBox*>("_verbose")->hide();
  _comments->findChild<XCheckBox*>("_verbose")->setChecked(false);
  _comments->_newComment->setVisible(false);
  _comments->setVerboseCommentList(true);
  _comments->setVisible(false);
  _comments->setEditable(false);
  moreLayout->addWidget(_comments);

  resize( QSize(524, 270).expandedTo(minimumSizeHint()) );
  //clearWState( WState_Polished );

  connect(buttonBox, SIGNAL(accepted()), this, SLOT(sSave()));
  connect(buttonBox, SIGNAL(rejected()), this, SLOT(reject()));
  connect(_next, SIGNAL(clicked()), this, SLOT(sNextComment()));
  connect(_prev, SIGNAL(clicked()), this, SLOT(sPrevComment()));
  connect(_more, SIGNAL(toggled(bool)), _comments, SLOT(setVisible(bool)));

  setTabOrder( _cmnttype, _comment );
  setTabOrder( _comment, _save );
  setTabOrder( _save, _close );

  _sourcetype = "";
  _cmnttype->setAllowNull(true);

  shortcuts::setStandardKeys(this);
}

开发者ID:rkannadevara，项目名称:qt-client，代码行数:101，代码来源:comment.cpp

示例8: XDialog

user::user(QWidget* parent, const char * name, Qt::WindowFlags fl)
    : XDialog(parent, name, fl)
{
    setupUi(this);

    _authCache     = false;
    _cUsername     = "";
    _crmacctid     = -1;
    _inTransaction = false;
    _mode          = cView;

    connect(_close, SIGNAL(clicked()), this, SLOT(sClose()));
    connect(_crmacct, SIGNAL(clicked()),   this,     SLOT(sCrmAccount()));
    connect(_save, SIGNAL(clicked()), this, SLOT(sSave()));
    connect(_add, SIGNAL(clicked()), this, SLOT(sAdd()));
    connect(_addAll, SIGNAL(clicked()), this, SLOT(sAddAll()));
    connect(_revoke, SIGNAL(clicked()), this, SLOT(sRevoke()));
    connect(_revokeAll, SIGNAL(clicked()), this, SLOT(sRevokeAll()));
    connect(_module, SIGNAL(activated(const QString&)), this, SLOT(sModuleSelected(const QString&)));
    connect(_granted, SIGNAL(itemSelected(int)), this, SLOT(sRevoke()));
    connect(_available, SIGNAL(itemSelected(int)), this, SLOT(sAdd()));
    connect(_username, SIGNAL(editingFinished()), this, SLOT(sCheck()));
    connect(_enhancedAuth, SIGNAL(toggled(bool)), this, SLOT(sEnhancedAuthUpdate()));
    connect(_grantedGroup, SIGNAL(itemSelected(int)), this, SLOT(sRevokeGroup()));
    connect(_availableGroup, SIGNAL(itemSelected(int)), this, SLOT(sAddGroup()));
    connect(_addGroup, SIGNAL(clicked()), this, SLOT(sAddGroup()));
    connect(_revokeGroup, SIGNAL(clicked()), this, SLOT(sRevokeGroup()));
    connect(_grantedSite, SIGNAL(itemSelected(int)), this, SLOT(sRevokeSite()));
    connect(_availableSite, SIGNAL(itemSelected(int)), this, SLOT(sAddSite()));
    connect(_addSite, SIGNAL(clicked()), this, SLOT(sAddSite()));
    connect(_revokeSite, SIGNAL(clicked()), this, SLOT(sRevokeSite()));

    _available->addColumn("Available Privileges", -1, Qt::AlignLeft);
    _available->addColumn("Description", -1, Qt::AlignLeft);
    _granted->addColumn("Granted Privileges", -1, Qt::AlignLeft);
    _granted->addColumn("Description", -1, Qt::AlignLeft);

    _availableGroup->addColumn("Available Roles", -1, Qt::AlignLeft);
    _availableGroup->addColumn("Description", -1, Qt::AlignLeft);
    _grantedGroup->addColumn("Granted Roles", -1, Qt::AlignLeft);
    _grantedGroup->addColumn("Description", -1, Qt::AlignLeft);

    _availableSite->addColumn("Available Sites", -1, Qt::AlignLeft);
    _grantedSite->addColumn("Granted Sites",      -1, Qt::AlignLeft);

    _locale->setType(XComboBox::Locales);

    XSqlQuery modq;
    modq.exec( "SELECT DISTINCT priv_module FROM priv ORDER BY priv_module;" );
    for (int i = 0; modq.next(); i++)
        _module->append(i, modq.value("priv_module").toString());

    if(_evaluation == true)
    {
        _enhancedAuth->setEnabled(false);
        _passwd->setEnabled(false);
        _verify->setEnabled(false);
    }

    if (!_metrics->boolean("MultiWhs"))
        _tab->removeTab(_tab->indexOf(_siteTab));
}

开发者ID:chengzhou，项目名称:qt-client，代码行数:62，代码来源:user.cpp

示例9: sSave

	void	SetStrategy			(Bit16u ofs)	{ sSave(sDeviceHeader,strategy,ofs);			};

开发者ID:Avin15，项目名称:dospad，代码行数:1，代码来源:dos_mscdex.cpp

注：本文中的sSave函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sSelect函数代码示例发布时间：2022-05-30

C++ sPrint函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17953|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8508|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ sSave函数代码示例

示例1: XDialog

示例2: connect

示例3: XDialog

示例4: XDialog

示例5: XDialog

示例6: XWidget

示例7: QDialog

示例8: XDialog

示例9: sSave

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053