本文整理汇总了C++中saveStateClose函数的典型用法代码示例。如果您正苦于以下问题：C++ saveStateClose函数的具体用法？C++ saveStateClose怎么用？C++ saveStateClose使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了saveStateClose函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: loadState
static void loadState(RomMapperKonami5* rm)
{
SaveState* state = saveStateOpenForRead("mapperKonami5");
char tag[16];
int i;
for (i = 0; i < 4; i++) {
sprintf(tag, "romMapper%d", i);
rm->romMapper[i] = saveStateGet(state, tag, 0);
}
rm->sccEnable = saveStateGet(state, "sccEnable", 0);
saveStateClose(state);
sccLoadState(rm->scc);
for (i = 0; i < 4; i++) {
slotMapPage(rm->slot, rm->sslot, rm->startPage + i, rm->romData + rm->romMapper[i] * 0x2000, 1, 0);
}
if (rm->sccEnable) {
slotMapPage(rm->slot, rm->sslot, rm->startPage + 2, rm->romData + rm->romMapper[2] * 0x2000, 0, 0);
}
else {
slotMapPage(rm->slot, rm->sslot, rm->startPage + 2, rm->romData + rm->romMapper[2] * 0x2000, 1, 0);
}
}
开发者ID:Chegwin，项目名称:GBA4iOS-2.0-Beta-4，代码行数:28，代码来源:romMapperKonami5.c
示例2: tapeSaveState
void tapeSaveState() {
SaveState* state = saveStateOpenForWrite("tape");
saveStateSet(state, "ramImagePos", ramImagePos);
saveStateClose(state);
}
开发者ID:kkklatu，项目名称:blueMSX-libretro，代码行数:7，代码来源:Casette.c
示例3: wd2793SaveState
void wd2793SaveState(WD2793* wd)
{
SaveState* state = saveStateOpenForWrite("wd2793");
saveStateSet(state, "step", wd->step);
saveStateSet(state, "curStep", wd->curStep);
saveStateSet(state, "stepTime", wd->stepTime);
saveStateSet(state, "regStatus", wd->regStatus);
saveStateSet(state, "regCommand", wd->regCommand);
saveStateSet(state, "regSector", wd->regSector);
saveStateSet(state, "regTrack", wd->regTrack);
saveStateSet(state, "regData", wd->regData);
saveStateSet(state, "immediateInt", wd->immediateInt);
saveStateSet(state, "intRequest", wd->intRequest);
saveStateSet(state, "dataRequest", wd->dataRequest);
saveStateSet(state, "dataReady", wd->dataReady);
saveStateSet(state, "stepDirection", wd->stepDirection);
saveStateSet(state, "headLoaded", wd->headLoaded);
saveStateSet(state, "dataRequsetTime", wd->dataRequsetTime);
saveStateSet(state, "drive", wd->drive);
saveStateSet(state, "sectorOffset", wd->sectorOffset);
saveStateSet(state, "dataAvailable", wd->dataAvailable);
saveStateSet(state, "diskTrack", wd->diskTrack);
saveStateSet(state, "diskTracks[0]", wd->diskTracks[0]);
saveStateSet(state, "diskTracks[1]", wd->diskTracks[1]);
saveStateSet(state, "diskTracks[2]", wd->diskTracks[2]);
saveStateSet(state, "diskTracks[3]", wd->diskTracks[3]);
saveStateSet(state, "diskSide", wd->diskSide);
saveStateSet(state, "diskDensity", wd->diskDensity);
saveStateSetBuffer(state, "sectorBuf", wd->sectorBuf, 512);
saveStateClose(state);
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:34，代码来源:WD2793.c
示例4: y8950LoadState
void y8950LoadState(Y8950* y8950)
{
SaveState* state = saveStateOpenForRead("msxaudio1");
y8950->address = (UInt8)saveStateGet(state, "address", 0);
y8950->timerValue1 = saveStateGet(state, "timerValue1", 0);
y8950->timeout1 = saveStateGet(state, "timeout1", 0);
y8950->timerRunning1 = saveStateGet(state, "timerRunning1", 0);
y8950->timerValue2 = saveStateGet(state, "timerValue2", 0);
y8950->timerRunning2 = saveStateGet(state, "timerRunning2", 0);
y8950->timeout2 = saveStateGet(state, "timeout2", 0);
outd = saveStateGet(state, "outd", 0);
ams = saveStateGet(state, "ams", 0);
vib = saveStateGet(state, "vib", 0);
feedback2 = saveStateGet(state, "feedback2", 0);
saveStateClose(state);
Y8950LoadState(y8950->opl);
YM_DELTAT_ADPCM_LoadState(y8950->opl->deltat);
if (y8950->timerRunning1) {
boardTimerAdd(y8950->timer1, y8950->timeout1);
}
if (y8950->timerRunning2) {
boardTimerAdd(y8950->timer2, y8950->timeout2);
}
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:30，代码来源:Y8950.c
示例5: ym2151LoadState
void ym2151LoadState(YM2151* ym2151)
{
SaveState* state = saveStateOpenForRead("ym2151");
ym2151->address = (UInt8)saveStateGet(state, "address", 0);
ym2151->latch = (UInt8)saveStateGet(state, "latch", 0);
ym2151->timerValue1 = saveStateGet(state, "timerValue1", 0);
ym2151->timerRunning1 = saveStateGet(state, "timerRunning1", 0);
ym2151->timeout1 = saveStateGet(state, "timeout1", 0);
ym2151->timerValue2 = saveStateGet(state, "timerValue2", 0);
ym2151->timerRunning2 = saveStateGet(state, "timerRunning2", 0);
ym2151->timeout2 = saveStateGet(state, "timeout2", 0);
ym2151->irqVector = (UInt8)saveStateGet(state, "irqVector", 0);
saveStateClose(state);
YM2151LoadState(ym2151->opl);
if (ym2151->timerRunning1) {
boardTimerAdd(ym2151->timer1, ym2151->timeout1);
}
if (ym2151->timerRunning2) {
boardTimerAdd(ym2151->timer2, ym2151->timeout2);
}
}
开发者ID:meesokim，项目名称:bluemsx-wii，代码行数:26，代码来源:ym2151.c
示例6: wd2793LoadState
void wd2793LoadState(WD2793* wd)
{
SaveState* state = saveStateOpenForRead("wd2793");
wd->step = saveStateGet(state, "step", 0);
wd->curStep = saveStateGet(state, "curStep", 0);
wd->stepTime = saveStateGet(state, "stepTime", 0);
wd->regStatus = (UInt8) saveStateGet(state, "regStatus", 0);
wd->regCommand = (UInt8) saveStateGet(state, "regCommand", 0);
wd->regSector = (UInt8) saveStateGet(state, "regSector", 0);
wd->regTrack = (UInt8) saveStateGet(state, "regTrack", 0);
wd->regData = (UInt8) saveStateGet(state, "regData", 0);
wd->immediateInt = saveStateGet(state, "immediateInt", 0);
wd->intRequest = saveStateGet(state, "intRequest", 0);
wd->dataRequest = saveStateGet(state, "dataRequest", 0);
wd->dataReady = saveStateGet(state, "dataReady", 0);
wd->stepDirection = saveStateGet(state, "stepDirection", 0);
wd->headLoaded = saveStateGet(state, "headLoaded", 0);
wd->dataRequsetTime = saveStateGet(state, "dataRequsetTime", 0);
wd->drive = saveStateGet(state, "drive", 0);
wd->sectorOffset = saveStateGet(state, "sectorOffset", 0);
wd->dataAvailable = saveStateGet(state, "dataAvailable", 0);
wd->diskTrack = (UInt8) saveStateGet(state, "diskTrack", 0);
wd->diskTracks[0] = (UInt8) saveStateGet(state, "diskTracks0", 0);
wd->diskTracks[1] = (UInt8) saveStateGet(state, "diskTracks1", 0);
wd->diskTracks[2] = (UInt8) saveStateGet(state, "diskTracks2", 0);
wd->diskTracks[3] = (UInt8) saveStateGet(state, "diskTracks3", 0);
wd->diskSide = saveStateGet(state, "diskSide", 0);
wd->diskDensity = saveStateGet(state, "diskDensity", 0);
saveStateGetBuffer(state, "sectorBuf", wd->sectorBuf, sizeof(wd->sectorBuf));
saveStateClose(state);
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:34，代码来源:WD2793.c
示例7: wd33c93SaveState
void wd33c93SaveState(WD33C93* wd33c93)
{
SaveState* state = saveStateOpenForWrite("wd33c93");
int i;
saveStateSet(state, "myId", wd33c93->myId);
saveStateSet(state, "targetId", wd33c93->targetId);
saveStateSet(state, "latch", wd33c93->latch);
saveStateSet(state, "phase", wd33c93->phase);
saveStateSet(state, "counter", wd33c93->counter);
saveStateSet(state, "blockCounter", wd33c93->blockCounter);
saveStateSet(state, "tc", wd33c93->tc);
saveStateSet(state, "maxDev", wd33c93->maxDev);
saveStateSet(state, "pBuf", wd33c93->pBuf - wd33c93->buffer);
//saveStateGet(state, "timeout", wd33c93->timeout);
//saveStateGet(state, "timerRunning", wd33c93->timerRunning);
saveStateSetBuffer(state, "regs", wd33c93->regs, sizeof(wd33c93->regs));
saveStateSetBuffer(state, "buffer", wd33c93->buffer, BUFFER_SIZE);
saveStateClose(state);
for (i = 0; i < wd33c93->maxDev; ++i) {
scsiDeviceSaveState(wd33c93->dev[i]);
}
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:26，代码来源:wd33c93.c
示例8: saveState
static void saveState(RomMapperSCCplus* rm)
{
SaveState* state = saveStateOpenForWrite("mapperSCCplus");
char tag[16];
int i;
for (i = 0; i < 4; i++) {
sprintf(tag, "romMapper%d", i);
saveStateSet(state, tag, rm->romMapper[i]);
sprintf(tag, "isRamSegment%d", i);
saveStateSet(state, tag, rm->isRamSegment[i]);
sprintf(tag, "isMapped%d", i);
saveStateSet(state, tag, rm->isMapped[i]);
}
saveStateSet(state, "modeRegister", rm->modeRegister);
saveStateSet(state, "sccMode", rm->sccMode);
saveStateSetBuffer(state, "romData", rm->romData, sizeof(rm->romData));
saveStateClose(state);
sccSaveState(rm->scc);
}
开发者ID:Chegwin，项目名称:GBA4iOS-2.0-Beta-4，代码行数:26，代码来源:romMapperSCCplus.c
示例9: moonsoundLoadState
void moonsoundLoadState(Moonsound* moonsound)
{
SaveState* state = saveStateOpenForRead("moonsound");
moonsound->timerValue1 = saveStateGet(state, "timerValue1", 0);
moonsound->timeout1 = saveStateGet(state, "timeout1", 0);
moonsound->timerStarted1 = saveStateGet(state, "timerStarted1", 0);
moonsound->timerRef1 = (UInt8)saveStateGet(state, "timerRef1", 0);
moonsound->timerValue2 = saveStateGet(state, "timerValue2", 0);
moonsound->timeout2 = saveStateGet(state, "timeout2", 0);
moonsound->timerStarted2 = saveStateGet(state, "timerStarted2", 0);
moonsound->timerRef2 = (UInt8)saveStateGet(state, "timerRef2", 0);
moonsound->opl3latch = saveStateGet(state, "opl3latch", 0);
moonsound->opl4latch = (UInt8)saveStateGet(state, "opl4latch", 0);
saveStateClose(state);
moonsound->ymf262->loadState();
moonsound->ymf278->loadState();
if (moonsound->timerStarted1) {
boardTimerAdd(moonsound->timer1, moonsound->timeout1);
}
if (moonsound->timerStarted2) {
boardTimerAdd(moonsound->timer2, moonsound->timeout2);
}
}
开发者ID:CocoaMSX，项目名称:CocoaMSX，代码行数:28，代码来源:Moonsound.cpp
示例10: loadState
static void loadState(RomMapperOpcodeSaveRam* rm)
{
SaveState* state = saveStateOpenForRead("mapperOpcodeSaveRam");
saveStateGetBuffer(state, "saveRam", rm->saveRam, 0x8000);
saveStateClose(state);
}
开发者ID:Chegwin，项目名称:GBA4iOS-2.0-Beta-4，代码行数:8，代码来源:romMapperOpcodeSaveRam.c
示例11: loadState
static void loadState(RomMapperKonamiKeyboardMaster* rm)
{
SaveState* state = saveStateOpenForRead("mapperKonamiKbdMaster");
saveStateClose(state);
vlm5030LoadState(rm->vlm5030);
}
开发者ID:CocoaMSX，项目名称:CocoaMSX，代码行数:8，代码来源:romMapperKonamiKeyboardMaster.c
示例12: saveState
static void saveState(RomMapperCvMegaCart* rm)
{
SaveState* state = saveStateOpenForWrite("mapperCvMegaCart");
saveStateSet(state, "romMapper", rm->romMapper);
saveStateClose(state);
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:8，代码来源:romMapperCvMegaCart.c
示例13: loadState
static void loadState(RomMapperSvi328Col80* svi328col80)
{
SaveState* state = saveStateOpenForRead("Svi80Col");
svi328col80->memBankCtrl = (UInt8)saveStateGet(state, "memBankCtrl", 0);
saveStateClose(state);
}
开发者ID:CocoaMSX，项目名称:CocoaMSX，代码行数:8，代码来源:romMapperSvi80Col.c
示例14: loadState
static void loadState(Microsol* rm)
{
SaveState* state = saveStateOpenForRead("mapperMicrosol");
saveStateClose(state);
wd2793LoadState(rm->fdc);
}
开发者ID:meesokim，项目名称:bluemsx-wii，代码行数:8，代码来源:romMapperMicrosol.c
示例15: saveState
static void saveState(RomMapperSvi328Col80* svi328col80)
{
SaveState* state = saveStateOpenForWrite("Svi80Col");
saveStateSet(state, "memBankCtrl", svi328col80->memBankCtrl);
saveStateClose(state);
}
开发者ID:CocoaMSX，项目名称:CocoaMSX，代码行数:8，代码来源:romMapperSvi80Col.c
示例16: loadState
static void loadState(RomMapperKanji12* rm)
{
SaveState* state = saveStateOpenForRead("mapperKanji12");
rm->address = saveStateGet(state, "address", 0);
saveStateClose(state);
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:8，代码来源:romMapperKanji12.c
示例17: saveState
static void saveState(Microsol* rm)
{
SaveState* state = saveStateOpenForWrite("mapperMicrosol");
saveStateClose(state);
wd2793SaveState(rm->fdc);
}
开发者ID:meesokim，项目名称:bluemsx-wii，代码行数:8，代码来源:romMapperMicrosol.c
示例18: saveState
static void saveState(RomMapperPAC* rm)
{
SaveState* state = saveStateOpenForWrite("mapperPAC");
saveStateSetBuffer(state, "sram", rm->sram, sizeof(rm->sram));
saveStateClose(state);
}
开发者ID:Chegwin，项目名称:GBA4iOS-2.0-Beta-4，代码行数:8，代码来源:romMapperPAC.c
示例19: saveState
static void saveState(RomMapperKanji12* rm)
{
SaveState* state = saveStateOpenForWrite("mapperKanji12");
saveStateSet(state, "address", rm->address);
saveStateClose(state);
}
开发者ID:imclab，项目名称:CocoaMSX，代码行数:8，代码来源:romMapperKanji12.c
示例20: saveState
static void saveState(RomMapperA1FMModem* rm)
{
SaveState* state = saveStateOpenForWrite("mapperPanasonicA1FM");
saveStateSet(state, "romMapper", rm->romMapper);
saveStateClose(state);
}
开发者ID:Chegwin，项目名称:GBA4iOS-2.0-Beta-4，代码行数:8，代码来源:romMapperA1FMModem.c
注：本文中的saveStateClose函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论