C++ save_extension函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中save_extension函数的典型用法代码示例。如果您正苦于以下问题：C++ save_extension函数的具体用法？C++ save_extension怎么用？C++ save_extension使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了save_extension函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int main() {

  screen s;
  color c;
 
  
  c.red = MAX_COLOR;
  c.green = MAX_COLOR;
  c.blue = 0;
  
  clear_screen(s);

  int i, j;

  for (i=0; i < YRES; i++)
    for (j=0; j < XRES; j++)
      plot(s, c, i, j);
  
  c.green = 0;
  for (i = 0; i<100; i++) {
    draw_line(250, 250, 10+i, 10+i, s, c);
  }
  draw_line(1, 1, 60, 70, s, c);
  //Note: Display may not work on your system
  //save_ppm and save_extension should be fine
  display(s);
  save_ppm(s, "pic.ppm");
  save_extension(s, "whatevs.png");
}

开发者ID:stuydw，项目名称:line，代码行数:29，代码来源:main.c

示例2: display

/*======== void display() ==========
Inputs:   screen s
Returns:
Will display the screen s on your monitor

02/12/10 09:16:30
jdyrlandweaver
====================*/
void display( screen s) {
   int x, i;
  char *fname = ".tmp.png";
  save_extension(s, fname);
  i = fork();
  if (i == 0) {
    execlp("display", "display", fname, NULL);
  }
  else {
    wait(&x);
    remove( fname );
  }
  /* For some reason, this refuses to run correctly
     on some systems. Most likely a strange imagemagick
     install issue.
     Above is a workaroudn for now.
  int x, y;
  FILE *f;

  f = popen("display", "w");

  fprintf(f, "P3\n%d %d\n%d\n", XRES, YRES, MAX_COLOR);
  for ( y=0; y < YRES; y++ ) {
    for ( x=0; x < XRES; x++)

      fprintf(f, "%d %d %d ", s[x][y].red, s[x][y].green, s[x][y].blue);
    fprintf(f, "\n");
  }
  pclose(f);
  */
}

开发者ID:leoncheng57，项目名称:graphics-9-final，代码行数:39，代码来源:display.c

示例3: main

int main() {

  screen s;
  color c;
 
  
  c.red = MAX_COLOR;
  c.green = MAX_COLOR;
  c.blue = 0;
  
  clear_screen(s);

  int i, j;

  for (i=0; i < YRES; i++)
    for (j=-500; j < XRES; j++ )
      plot(s, c, i, j);
  
  c.green = 0;

  draw_line(0, 0, 400, 350, s, c); //oct 1
  draw_line(0, 0, 400, 450, s, c); //oct 2
  //draw_line(20, 20, 300, 250, s, c); //oct 5
  draw_line(20, 350, 300, 100, s, c); //oct 6
  
  //draw_line(0, 0, 400, 350, s, c);
  //draw_line(0, 0, 400, 350, s, c);
  
  //Note: Display may not work on your system
  //save_ppm and save_extension should be fine
  save_ppm(s, "pic.ppm");
  save_extension(s, "whatevs.png");
  //display(s);
}

开发者ID:sduncan，项目名称:Code，代码行数:34，代码来源:main.c

示例4: main

int main() {

  screen s;
  color c;

  c.red = 0;
  c.green = 255;
  c.blue = 255;

  int i, j;

  for( i=0; i<XRES; i++) 
    for ( j=0; j<YRES; j++) {
      /*
      c.red = random() % (MAX_COLOR + 1);
      c.green = random() % (MAX_COLOR + 1);
      c.blue = random() % (MAX_COLOR + 1);
      */
      c.red= 190; 
      c.blue =150; 
      c.green=175; 
      plot( s, c, i, j);
    }

  c.blue=255; 
  c.red =0; 
  c.green = 150; 

  printf("Matrix Testing Area. Please stand well out of range of the matrix that is about to happen.\n"); 

  printf("Making a 3X6 matrix.\n\n"); 
  struct matrix* testing = new_matrix(3,6); 
  add_edge(testing, 1, 11, 1, 2, 12, 1); 
  add_edge(testing, 3, 13, 1, 4, 14, 1); 
  add_edge(testing, 5, 15, 1, 6, 16, 1); 

  printf("Points made. Print test.\n"); 
  print_matrix(testing); 
  printf("Scalar Multiplication Test:\n"); 
  scalar_mult(3, testing); 
  print_matrix(testing); 

  printf("Identity test. Time to face the facts.\n"); 
  struct matrix* identity = new_matrix(6, 6); 
  ident(identity); 
  print_matrix(identity); 

  printf("Testing matrix multiplication. Prepare your eyes. Multiplying by the identity matrix now.\n"); 
  matrix_mult(testing, identity); 
  print_matrix(identity); 


  drawPicture(s, c); 
  display( s );    
  save_ppm(s,  "image" );
  save_extension(s, "image.jpg");
  
}

开发者ID:stuydw，项目名称:matrix，代码行数:58，代码来源:main.c

示例5: main

int main() {

  screen s;
  color c;

  /* Setup color and screen */

  clear_screen(s);
  
  c.red = 255;
  c.green = 150;
  c.blue = 100;

  /* Setup matrices */
  
  struct matrix *edges;
  struct matrix *transform;

  edges = new_matrix(4, 1);

  /* Finally Testing */
  
  add_edge(edges, 80, 80, 0, 80, 120, 0);
  add_edge(edges, 80, 120, 0, 120, 120, 0);
  add_edge(edges, 120, 120, 0, 120, 80, 0);
  add_edge(edges, 120, 80, 0, 80, 80, 0);

  add_edge(edges, 60, 80, 0, 80, 120, 0);
  add_edge(edges, 80, 120, 0, 100, 100, 0);
  add_edge(edges, 100, 100, 0, 80, 60, 0);
  add_edge(edges, 80, 60, 0, 60, 80, 0);

  add_edge(edges, 90, 90, 0, 110, 90, 0);
  add_edge(edges, 110, 90, 0, 110, 110, 0);
  add_edge(edges, 110, 110, 0, 90, 110, 0);
  add_edge(edges, 90, 110, 0, 90, 90, 0);
  
  draw_lines(edges, s, c);

  int i;
  for (i = 0; i < 40; i+=2) {
    transform = make_translate(i, i, i);
    matrix_mult(transform, edges);
    draw_lines(edges, s, c);
  }  
  
  display(s);
  save_extension(s, "matrix.png");

  /* Free Matrices */
  
  free_matrix( transform );
  free_matrix( edges );

  return 0;
}

开发者ID:young-k，项目名称:Notes，代码行数:56，代码来源:main.c

示例6: main

int main() {

    screen s;
    color c;

    int x1, y1;

    c.red = MAX_COLOR;
    c.green = MAX_COLOR;
    c.blue = MAX_COLOR;

    clear_screen(s);

    int i, j;

    for (i=0; i < YRES; i++)
        for (j=0; j < XRES; j++ )
            plot(s, c, i, j);

    c.green = 0;
    c.blue = 0;
    
    x1 = 500;
    y1 = 250;
    while (x1 >= 250) {
        draw_line(250, 250, x1, y1, s, c);
        c.red-=2;
        c.green++;
        x1--;
        y1++;
    }
    while (y1 >= 250) {
        draw_line(250, 250, x1, y1, s, c);
        c.green--;
        c.blue--;
        x1--;
        y1--;
    }
    while (x1 <= 250) {
        draw_line(250, 250, x1, y1, s, c);
        c.red++;
        x1++;
        y1--;
    }
    while (y1 <= 250) {
        draw_line(250, 250, x1, y1, s, c);
        c.green++;
        x1++;
        y1++;
    }
    //Note: Display may not work on your system
    //save_ppm and save_extension should be fine
    display(s);
    save_ppm(s, "pic.ppm");
    save_extension(s, "whatevs.png");
}

开发者ID:stuydw，项目名称:line，代码行数:56，代码来源:main.c

示例7: main

int main() {

  screen s;
  color c;
 
  
  c.red = 0;
  c.green = MAX_COLOR;
  c.blue = 0;
  
  clear_screen(s);


  //octant 1
  draw_line( 0, 0, XRES-1, YRES - 75, s, c);
  //octant 2
  draw_line( 0, 0, XRES - 75, YRES-1, s, c); 
  //octant 8
  draw_line( 0, YRES-1, XRES-1, 75, s, c);  
  //octant 7
  draw_line( 0, YRES-1, XRES - 75, 0, s, c);
  
  c.green = 0;
  c.blue = MAX_COLOR;
  //octant 5
  draw_line( XRES - 1, YRES - 1, 0, 75, s, c);
  //octant 6
  draw_line( XRES - 1, YRES -1, 75, 0, s, c);
  //octant 4
  draw_line( XRES - 1, 0, 0, YRES - 75, s, c);
  //octant 3
  draw_line( XRES - 1, 0, 75, YRES - 1, s, c);
  
  c.blue = 0;
  c.red = MAX_COLOR;
  //y = x, y = -x
  draw_line( 0, 0, XRES - 1, YRES - 1, s, c);
  draw_line( 0, YRES - 1, XRES - 1, 0, s, c);

  //horizontal, vertical line
  draw_line( 0, YRES / 2, XRES - 1, YRES / 2, s, c);
  draw_line( XRES / 2, 0, XRES / 2, YRES - 1, s, c);
  
  int len = 1;
  int i;
  while (i<XRES-1){
    c.blue = (c.blue + 1)%256;
    draw_line(i,i,(i*i)%XRES,i,s,c);
    draw_line(i,i,i,(i*i)%YRES,s,c);
    i++;
  }

  display(s);
  save_extension(s, "lines.png");
}

开发者ID:ivlin，项目名称:graphics-homeworks，代码行数:55，代码来源:main.c

示例8: main

int main(){

  screen s;
  color c;

  c.red = 0;
  c.green = 0;
  c.blue = MAX_COLOR;

  int ctr = 0;
  while (ctr <= 200){
    draw_line(0, ctr, XRES-1, YRES-1, s, c);
    ctr ++;
    c.red = ctr % MAX_COLOR;
  }

  c.red = 0;
  ctr = 0;
  while (ctr <= 200){
    draw_line(XRES-1, YRES-1, ctr, 0, s, c);
    ctr ++;
    c.green = ctr % MAX_COLOR;
  }

  c.green = 0;
  ctr = 0;
  while (ctr < XRES){
    draw_line(0, 201, ctr, YRES-1, s, c);
    ctr ++;
    c.green = ctr % MAX_COLOR;
  }

  c.green = 0;
  ctr = 0;
  while (ctr < YRES){
    draw_line(201, 0, XRES-1, ctr, s, c);
    ctr ++;
    c.red = ctr % MAX_COLOR;
  }
  
  
  save_extension(s, "pic.png");
  display(s);
  
  return 0;
}

开发者ID:mpapallo，项目名称:Graphics_Work1，代码行数:46，代码来源:coolmain.c

示例9: main

int main() {

  screen s;
  color c;
 
  
  c.red = 0;
  c.green = MAX_COLOR;
  c.blue = 0;
  
  clear_screen(s);


  //octant 1
  draw_line( 0, 0, XRES-1, YRES - 75, s, c);
  //octant 2
  draw_line( 0, 0, XRES - 75, YRES-1, s, c); 
  //octant 8
  draw_line( 0, YRES-1, XRES-1, 75, s, c);  
  //octant 7
  draw_line( 0, YRES-1, XRES - 75, 0, s, c);

  c.green = 0;
  c.blue = MAX_COLOR;
  //octant 5
  draw_line( XRES - 1, YRES - 1, 0, 75, s, c);
  //octant 6
  draw_line( XRES - 1, YRES -1, 75, 0, s, c);
  //octant 4
  draw_line( XRES - 1, 0, 0, YRES - 75, s, c);
  //octant 3
  draw_line( XRES - 1, 0, 75, YRES - 1, s, c);
  
  c.blue = 0;
  c.red = MAX_COLOR;
  //y = x, y = -x
  draw_line( 0, 0, XRES - 1, YRES - 1, s, c);
  draw_line( 0, YRES - 1, XRES - 1, 0, s, c);

  //horizontal, vertical line
  draw_line( 0, YRES / 2, XRES - 1, YRES / 2, s, c);
  draw_line( XRES / 2, 0, XRES / 2, YRES - 1, s, c);
  */
  display(s);
  save_extension(s, "lines.png");
}

开发者ID:JayStuy，项目名称:line_maker，代码行数:46，代码来源:main.c

示例10: main

int main( int argc, char** argv ) {

  screen s;
  struct matrix *edges;
  struct matrix *transform;
  color c;
  c.red = 0;
  c.green = 255;
  c.blue = 255;

  edges = new_matrix(4, 4);
  transform = new_matrix(4, 4);

  if ( argc == 2 )
    parse_file( argv[1], transform, edges, s );
  else
    parse_file( "stdin", transform, edges, s );

  add_edge( edges, 250,0,0, 250,25,0 );//M                       
  add_edge( edges, 250,25,0, 263,0,0 );
  add_edge( edges, 263,0,0, 275,25,0 );
  add_edge( edges, 275,25,0, 275,0,0 );
  add_edge( edges, 280,0,0, 293,25,0 );//A                      
  add_edge( edges, 293,25,0, 305,0,0 );
  add_edge( edges, 287,13,0, 299,13,0 );
  add_edge( edges, 310,0,0, 325,25,0 );//Y                               
  add_edge( edges, 318,13,0, 305,25,0 );
  add_edge( edges, 330,0,0, 343,25,0 );//A                              
  add_edge( edges, 343,25,0, 355,0,0 );
  add_edge( edges, 337,13,0, 349,13,0 );
  add_edge( edges, 360,0,0, 360,25,0 );//N                         
  add_edge( edges, 360,25,0, 385,0,0 );
  add_edge( edges, 385,0,0, 385,25,0 );
  add_edge( edges, 390,0,0, 390,25,0 );//K                           
  add_edge( edges, 390,13,0, 408,25,0 );
  add_edge( edges, 395,14,0, 408,0,0 );
  draw_lines(edges, s, c);

  save_extension(s, "dimensional.png");
  display(s);

  free_matrix( transform );
  free_matrix( edges );
}

开发者ID:mayankvanjani，项目名称:mayank_el_3D，代码行数:44，代码来源:main.c

示例11: arguemnts


//.........这里部分代码省略.........
the trig functions int math.h use radian mesure, but us normal
humans use degrees, so the file will contain degrees for rotations,
be sure to conver those degrees to radians (M_PI is the constant
for PI)

jdyrlandweaver
====================*/
void parse_file ( char * filename, 
                  struct matrix * transform, 
                  struct matrix * pm,
                  screen s) {


  double args [6];
  char command [25];

  color c;
  c.red = 255;
  c.blue = 0;
  c.green = 0;

  FILE *f = fopen(filename, "r");


  if(f == NULL) {
    printf("cannot find file\n");
    exit(1);
  }

  while(fgets(command, 25, f)){
    if(command[0] == 'l') {
      fgets(command, 25, f);
      sscanf(command, "%lf %lf %lf %lf %lf %lf", &args[0], &args[1], &args[2], &args[3], &args[4], &args[5]);
      add_edge(pm, args[0], args[1], args[2], args[3], args[4], args[5]);
    }

    else if (command[0] == 'i') {
      ident(transform);
    }

    else if (command[0] == 's') {
      fgets(command, 25, f);
      sscanf(command, "%lf %lf %lf", &args[0], &args[1], &args[2]);
      matrix_mult(make_scale(args[0], args[1], args[2]), transform);
    }

    else if (command[0] == 't') {
      fgets(command, 25, f);
      sscanf(command, "%lf %lf %lf", &args[0], &args[1], &args[2]);
      struct matrix *m;
      m = make_translate(args[0], args[1], args[2]);
      matrix_mult(m, transform);
    }

    else if (command[0] == 'x') {
      fgets(command, 25, f);
      sscanf(command, "%lf", &args[0]);
      struct matrix *m;
      m = make_rotX(args[0]);
      matrix_mult(m, transform);
    }

    else if (command[0] == 'y') {
      fgets(command, 25, f);
      sscanf(command, "%lf", &args[0]);
      struct matrix *m;
      m = make_rotY(args[0]);
      matrix_mult(m, transform);
    }

    else if (command[0] == 'z') {
      fgets(command, 25, f);
      sscanf(command, "%lf", &args[0]);
      struct matrix *m;
      m = make_rotZ(args[0]);
      matrix_mult(m, transform);
    }

    else if (command[0] == 'a') {
      matrix_mult(transform, pm);
    }

    else if (command[0] == 'v') {
      draw_lines(pm, s, c);
    }

    else if (command[0] == 'g') {
      draw_lines(pm, s, c);
      fgets(command, 25, f);
      int i = strlen(command);
      command[i] = '\0';
      save_extension(s, command);
    }

    else if (command[0] == 'q') {
      exit(1);
    }
  }
  
}

开发者ID:stuydw，项目名称:transformations，代码行数:101，代码来源:parser.c

示例12: arguemnts


//.........这里部分代码省略.........
      add_box(pm, x, y, z, width, height, depth);
      //printf( "%lf %lf %lf\n", x, y, z);
    }    
    else if ( strncmp(line, "sphere", strlen(line)) == 0 ) {
      //printf("SPHERE\n");
      fgets(line, 255, f);
      sscanf(line, "%lf %lf %lf", &x, &y, &radius);
      add_sphere(pm, x, y, radius, 0.01);
      //printf( "%lf %lf %lf\n", x, y, z);
    }    
    else if ( strncmp(line, "torus", strlen(line)) == 0 ) {
      //printf("TORUS\n");ds
      fgets(line, 255, f);
      sscanf(line, "%lf %lf %lf %lf", &x, &y, &radius1, &radius2 );
      add_torus(pm, x, y, radius1, radius2, 0.01);
      //printf( "%lf %lf %lf\n", x, y, z);
    }    
    else if ( strncmp(line, "scale", strlen(line)) == 0 ) {
      //printf("SCALE\n");
      fgets(line, 255, f);
      //line[strlen(line)-1]='\0';      
      sscanf(line, "%lf %lf %lf", &x, &y, &z);
      tmp = make_scale(x, y, z);
      matrix_mult(tmp, transform);
      //print_matrix(transform);
    }
    else if ( strncmp(line, "translate", strlen(line)) == 0 ) {
      //printf("TRANSLATE\n");
      fgets(line, 255, f);
      //      line[strlen(line)-1]='\0';      
      sscanf(line, "%lf %lf %lf", &x, &y, &z);
      tmp = make_translate(x, y, z);
      matrix_mult(tmp, transform);
      //print_matrix(transform);
    }
    else if ( strncmp(line, "xrotate", strlen(line)) == 0 ) {
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotX( angle);
      matrix_mult(tmp, transform);
    }
    else if ( strncmp(line, "yrotate", strlen(line)) == 0 ) {
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotY( angle);
      matrix_mult(tmp, transform);
    }
    else if ( strncmp(line, "zrotate", strlen(line)) == 0 ) {
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotZ( angle);
      matrix_mult(tmp, transform);
    }
    else if ( strncmp(line, "ident", strlen(line)) == 0 ) {
      ident(transform);
    }
    else if ( strncmp(line, "apply", strlen(line)) == 0 ) {
      //printf("APPLY!\n");
      //print_matrix( transform );
      //      print_matrix(pm);
      matrix_mult(transform, pm);
    }
    else if ( strncmp(line, "display", strlen(line)) == 0 ) {
      clear_screen(s);
      draw_lines(pm, s, g);
      display(s);
    }
    else if ( strncmp(line, "save", strlen(line)) == 0 ) {
      fgets(line, 255, f);
      // line[strlen(line)-1] = '\0';
      clear_screen(s);
      draw_lines(pm, s, g);
      save_extension(s, line);
    }
    else if ( strncmp(line, "clear", strlen(line)) == 0 ) {
      fgets(line, 255, f);
      // line[strlen(line)-1] = '\0';
      clear_screen(s);
    }
    
    else if ( strncmp(line, "quit", strlen(line)) == 0 ) {
      return;
    }
    else if (strncmp(line, "#", strlen(1)) == 0){
    }
    else {
      printf("Invalid command\n");
    }
  }
  
  free_matrix(tmp);
  fclose(f);
  //printf("END PARSE\n");
}

开发者ID:nspektor，项目名称:3dHW，代码行数:101，代码来源:parser.c

示例13: arguemnts


//.........这里部分代码省略.........
    }
    else if ( strncmp(line, "scale", strlen(line)) == 0 ) {
      fgets(line, 255, f);
      //line[strlen(line)-1]='\0';      
      sscanf(line, "%lf %lf %lf", &x, &y, &z);
      tmp = make_scale(x, y, z);
      //matrix_mult(tmp, transform);
      //print_matrix(transform);
      //matrix_mult( tmp, STACK->data[ STACK->top ] );
      matrix_mult( STACK->data[ STACK->top ], tmp );
      copy_matrix( tmp, STACK->data[ STACK->top ] );
    }
    else if ( strncmp(line, "translate", strlen(line)) == 0 ) {
      //printf("TRANSLATE\n");
      fgets(line, 255, f); 
      sscanf(line, "%lf %lf %lf", &x, &y, &z);
      tmp = make_translate(x, y, z);
      //matrix_mult(tmp, transform);
      //matrix_mult( tmp, STACK->data[ STACK->top ] );
      matrix_mult( STACK->data[ STACK->top ], tmp );
      copy_matrix( tmp, STACK->data[ STACK->top ] );
    }
    else if ( strncmp(line, "xrotate", strlen(line)) == 0 ) {
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotX( angle);
      //matrix_mult(tmp, transform);
      //matrix_mult( tmp, STACK->data[ STACK->top ] );
      matrix_mult( STACK->data[ STACK->top ], tmp );
      copy_matrix( tmp, STACK->data[ STACK->top ] );
    }
    else if ( strncmp(line, "yrotate", strlen(line)) == 0 ) {
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotY( angle);
      //matrix_mult(tmp, transform);
      //matrix_mult( tmp, STACK->data[ STACK->top ] );
      matrix_mult( STACK->data[ STACK->top ], tmp );
      copy_matrix( tmp, STACK->data[ STACK->top ] );
    }
    else if ( strncmp(line, "zrotate", strlen(line)) == 0 ) {
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotZ( angle);
      //matrix_mult(tmp, transform);
      //matrix_mult( tmp, STACK->data[ STACK->top ] );
      matrix_mult( STACK->data[ STACK->top ], tmp );
      copy_matrix( tmp, STACK->data[ STACK->top ] );
    }
    else if ( strncmp(line, "ident", strlen(line)) == 0 ) {
      ident(transform);
    }
    else if ( strncmp(line, "apply", strlen(line)) == 0 ) {
      //printf("APPLY!\n");
      //print_matrix( transform );
      //      print_matrix(pm);
      matrix_mult(transform, pm);
    }
    else if ( strncmp(line, "print", strlen(line)) == 0) {
      print_matrix( STACK->data[ STACK->top ] );
    }
    else if ( strncmp(line, "display", strlen(line)) == 0 ) {
      display(s);
    }
    else if ( strncmp(line, "save", strlen(line)) == 0 ) {
      fgets(line, 255, f);
      // line[strlen(line)-1] = '\0';
      //clear_screen(s);
      //draw_polygons(pm, s, g);
      save_extension(s, line);
    }
    else if ( strncmp(line, "clear", strlen(line)) == 0 ) {
      pm->lastcol = 0;
    }
    else if ( strncmp(line, "quit", strlen(line)) == 0 ) {
      return;
    }
    else if ( strncmp(line, "push", strlen(line)) == 0 ) {
      push( STACK ); //seg fault
      printf("Pushed\n");
    }
    else if ( strncmp(line, "pop", strlen(line)) == 0 ) {
      pop( STACK );
      printf("Popped\n");
    } 
    else if ( line[0] != '#' ) {
      printf("Invalid command\n");
    }
  }
  
  free_matrix(tmp);
  fclose(f);
  //printf("END PARSE\n");
}

开发者ID:RongYu98，项目名称:MDL，代码行数:101，代码来源:parser.c

示例14: main


//.........这里部分代码省略.........
  c.red = 0;
  c.green = MAX_COLOR;
  c.blue = 0;
  
  clear_screen(s);

  /*
  //octant 1
  draw_line( 0, 0, XRES-1, YRES - 75, s, c);  
  //  draw_line( XRES-1, YRES - 75, 0, 0, s, c);  

  //octant 2
  draw_line( 0, 0, XRES - 75, YRES-1, s, c); 
  //octant 8
  draw_line( 0, YRES-1, XRES-1, 75, s, c);  
  //octant 7
  draw_line( 0, YRES-1, XRES - 75, 0, s, c);

  c.green = 0;
  c.blue = MAX_COLOR;
  //octant 5
  draw_line( XRES - 1, YRES - 1, 0, 75, s, c);
  //octant 6
  draw_line( XRES - 1, YRES -1, 75, 0, s, c);
  //octant 4
  draw_line( XRES - 1, 0, 0, YRES - 75, s, c);
  //octant 3
  draw_line( XRES - 1, 0, 75, YRES - 1, s, c);
  
  c.blue = 0;
  c.red = MAX_COLOR;
  //y = x, y = -x
  draw_line( 0, 0, XRES - 1, YRES - 1, s, c);
  draw_line( 0, YRES - 1, XRES - 1, 0, s, c);

  //horizontal, vertical line
  draw_line( 0, YRES / 2, XRES - 1, YRES / 2, s, c);
  draw_line( XRES / 2, 0, XRES / 2, YRES - 1, s, c);

  draw_coord(s, c);
  draw_border(s, c);
  */
  c.red = MAX_COLOR;
  c.green = 0;
  c.blue = 0;
  for ( i = 0; i < XRES; i+=6 ) {
    draw_line( XRES / 2, YRES / 2, i, 0, s, c );
    c.red = c.red - 3;
    c.green = c.green + 3;
  }

  c.red = 0;
  c.green = MAX_COLOR;
  for ( i = 0; i < YRES; i+=6 ) {
    draw_line( XRES / 2, YRES / 2, YRES, i, s, c );
    c.green = c.green - 3;
    c.blue = c.blue + 3;
  }

  c.green = 0;
  c.blue = MAX_COLOR;
  for (i = 0; i < XRES; i+=6 ) {
    draw_line( XRES / 2, YRES /2, XRES - i, YRES, s, c );
    c.blue = c.blue - 3;
    c.green += 3;
    c.red += 3;
  }

  c.blue = 0;
  for (i = 0; i < XRES; i+=6 ) {
    draw_line( XRES / 2, YRES /2, 0, YRES - i, s, c );
    c.green -= 3;
  }

  for ( i = 0; i < XRES; i++ ) {
    for ( j = 0; j < YRES; j++ ) {
      if ( i % 100 <= 3 || j % 100 <= 3 ) {
	c.red = MAX_COLOR;
	c.green = MAX_COLOR / 2 + 50;
	c.blue = MAX_COLOR;
	plot (s, c, i, j);
      }
    }
  }

  for ( i = 0; i < XRES; i+=10 ) {
    c.red = 0;
    c.green = 0;
    c.blue = 0;
    draw_line( i, 0, 0, i, s, c );
    draw_line( i, 0, YRES - i, XRES, s, c );
    draw_line( 0, i, XRES, YRES - i, s, c );
  }

  draw_border(s, c);

  save_extension(s, "lines.png");  
  display(s);

}

开发者ID:mayankvanjani，项目名称:mayank_el_lines，代码行数:101，代码来源:main.c

示例15: arguments


//.........这里部分代码省略.........
      add_curve(pm, x1, y1, x2, y2, x3, y3, x4, y4, 0.01, BEZIER_MODE );
      //printf( "%lf %lf %lf\n", x, y, z);
      break;
    case 'h':
      fgets(line, 255, f);
      sscanf(line, "%lf %lf %lf %lf %lf %lf %lf %lf",
	     &x1, &y1, &x2, &y2, &x3, &y3, &x4, &y4);
      add_curve(pm, x1, y1, x2, y2, x3, y3, x4, y4, 0.01, HERMITE_MODE );
      //printf( "%lf %lf %lf\n", x, y, z);
      break;
    case 's':
      //printf("SCALE\n");
      fgets(line, 255, f);
      //line[strlen(line)-1]='\0';      
      sscanf(line, "%lf %lf %lf", &x, &y, &z);
      tmp = make_scale(x, y, z);
      matrix_mult(tmp, transform);
      //print_matrix(transform);
      break;
    case 't':
      //printf("TRANSLATE\n");
      fgets(line, 255, f);
      //      line[strlen(line)-1]='\0';      
      sscanf(line, "%lf %lf %lf", &x, &y, &z);
      tmp = make_translate(x, y, z);
      matrix_mult(tmp, transform);
      //print_matrix(transform);
      break;
    case 'x':
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotX( angle);
      matrix_mult(tmp, transform);
      break;
    case 'y':
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotY( angle);
      matrix_mult(tmp, transform);
      break;
    case 'z':
      //printf("ROTATE!\n");
      fgets(line, 255, f);
      sscanf(line, "%lf", &angle);
      angle = angle * (M_PI / 180);
      tmp = make_rotZ( angle);
      matrix_mult(tmp, transform);
      break;
    case 'i':
      ident(transform);
      break;
    case 'a':
      //printf("APPLY!\n");
      //print_matrix( transform );
      //      print_matrix(pm);
      matrix_mult(transform, pm);
      break;
    case 'v':
 
      /*
      clear_screen(s);
      draw_lines(pm, s, g);
      display(s);
      break;
      */
      
      // Second version for triangles:
      clear_screen(s);
      draw_polygons(pm, s, g);
      display(s);
      break;
      
    case 'w':
      pm->lastcol = 0;
      break;
    case 'g':
      fgets(line, 255, f);
      // line[strlen(line)-1] = '\0';
      clear_screen(s);
      draw_polygons(pm, s, g);
      save_extension(s, line);
      break;
    case 'q':
      return;
    case '#':
      break;
    default:
      printf("Invalid command\n");
      break;
    }
  }

  free_matrix(tmp);
  fclose(f);
  //printf("END PARSE\n");
}

开发者ID:stuydw，项目名称:polygons，代码行数:101，代码来源:parser.c

示例16: main

int main() {

  //Basic Matrix Math
  struct matrix *a;
  struct matrix *b;

  a=new_matrix(4,4);
  b=new_matrix(4,2);
 
  
  printf("Identity matrix:\n");
  ident(a);
  print_matrix(a);
  
  b->m[0][0]=1;
  b->m[0][1]=2;
  b->m[1][0]=3;
  b->m[1][1]=4;
  b->m[2][0]=5;
  b->m[2][1]=6;
  b->m[3][0]=7;
  b->m[3][1]=8;
  
  printf("Matrix #2:\n");
  print_matrix(b);
  
  printf("Scalar Multiplication by 2:\n");
  scalar_mult(2, b);
  print_matrix(b);
  
  printf("New Matrix #1:\n");
  a->m[2][1]=3;
  a->m[0][3]=2;
  print_matrix(a);
  
  printf("Matrix Multiplication:\n");
  matrix_mult(a, b);
  print_matrix(b);

  printf("Adding points/edges:\n");
  struct matrix *d;
  d = new_matrix(3, 3);
  add_point(d, 200,400,70);
  add_point(d, 200,0,7);
  print_matrix(d);
  printf("\n");
  add_edge(d, 300,500,100,300,100,134);
  add_edge(d, 100,500,100,100,100,134);
  add_edge(d, 400,00,100,400,400,134);
  print_matrix(d);
  printf("\n");


  screen s;
  color c;

  c.red = 200;
  c.green = 100;
  c.blue = 250;

  int i, j;



  for( i=0; i<XRES; i++) 
    for ( j=0; j<YRES; j++) {
      plot( s, c, i, j);
    }

  c.red=0;
  c.green=200;
  c.blue=200;

  draw_lines(d, s, c);
 
  display( s );    
  save_ppm(s,  "image" );
  save_extension(s, "image.jpg");
  
}

开发者ID:stuydw，项目名称:matrix，代码行数:80，代码来源:main.c

示例17: source


//.........这里部分代码省略.........
          draw_lines( tmp, t, g );
            tmp->lastcol = 0;
          break;

        case MOVE:
          //printf("Move\n");
          //get the factors
          xval = op[i].op.move.d[0];
          yval =  op[i].op.move.d[1];
          zval = op[i].op.move.d[2];
          v = op[i].op.move.p;
          if(v){
            xval = xval * v->s.value;
            yval = yval * v->s.value;
            zval = zval * v->s.value;
          }
          //printf("x: %f y: %f z: %f\n", xval, yval, zval);

          transform = make_translate( xval, yval, zval );
          //multiply by the existing origin
          matrix_mult( s->data[ s->top ], transform );
          //put the new matrix on the top
          copy_matrix( transform, s->data[ s->top ] );
          free_matrix( transform );
          break;

        case SCALE:
          //printf("Scale\n");
          xval = op[i].op.scale.d[0];
          yval = op[i].op.scale.d[1];
          zval = op[i].op.scale.d[2];

          v = op[i].op.scale.p;
          if(v){
            //printf("I'm not null Scale\n");
            xval *= v->s.value;
            yval *= v->s.value;
            zval *= v->s.value;
          }

          transform = make_scale( xval, yval, zval );
          matrix_mult( s->data[ s->top ], transform );
          //put the new matrix on the top
          copy_matrix( transform, s->data[ s->top ] );
          free_matrix( transform );
          break;

        case ROTATE:
          //printf("Rotate\n");
          xval = op[i].op.rotate.degrees * ( M_PI / 180 );

          v = op[i].op.rotate.p;
          if(v){
            xval *= v->s.value;
          }
          //get the axis
          if ( op[i].op.rotate.axis == 0 )
            transform = make_rotX( xval );
          else if ( op[i].op.rotate.axis == 1 )
            transform = make_rotY( xval );
          else if ( op[i].op.rotate.axis == 2 )
            transform = make_rotZ( xval );

          matrix_mult( s->data[ s->top ], transform );
          //put the new matrix on the top
          copy_matrix( transform, s->data[ s->top ] );
          free_matrix( transform );
          break;

        case PUSH:
          //printf("Push\n");
          push( s );
          break;
        case POP:
          //printf("Pop\n");
          pop( s );
          break;
        case SAVE:
          //printf("Save\n");
          save_extension( t, op[i].op.save.p->name );
          break;
        case DISPLAY:
          //printf("Display\n");
          display( t );
          break;
      }
    }
    if(num_frames>1){
      sprintf (frame_name, "%s%03d.png", name, f);
      save_extension(t, frame_name);
    }
    clear_screen(t);
    free_stack(s);
    free_matrix(tmp);
  }

  //free_stack( s );
  //free_matrix( tmp );
  //free_matrix( transform );
}

开发者ID:IshraqBhuiyan，项目名称:mdl_animation，代码行数:101，代码来源:my_main.c

示例18: my_main

void my_main( int polygons ) {

  int i;
  double step;
  double xval, yval, zval;
  struct matrix *transform;
  struct matrix *tmp;
  struct stack *s;
  screen t;
  color g;
  
  s = new_stack();
  tmp = new_matrix(4, 1000);
  clear_screen( t );

  for (i=0;i<lastop;i++) {  
    switch (op[i].opcode) {
      //simple cases
      //i realized that you already defined these constants  in another 
      //file after looking at this for 30 min -_-
    case POP:
      pop(s);
      break;
    case PUSH:
      push(s);
      break;

      //move,scale,rotate
    case MOVE:
      transform = make_translate(op[i].op.move.d[0],op[i].op.move.d[1],
				 op[i].op.move.d[2]);
      matrix_mult(transform,s->data[s->top]);
      free_matrix(transform);
      break;
    case ROTATE:
      //there are 3 rotations possible, SO SWITCH-CEPTION!
      switch((int)op[i].op.rotate.axis)
	{
	case ROT_X:
	  transform = make_rotX(op[i].op.rotate.degrees);
	  break;
	case ROT_Y:
	  transform = make_rotY(op[i].op.rotate.degrees);
	  break;
	case ROT_Z:
	  transform = make_rotZ(op[i].op.rotate.degrees);
	  break;
	}
      matrix_mult(transform,s->data[s->top]);
      free_matrix(transform);
      break;
    case SCALE:
      transform = make_scale(op[i].op.scale.d[0],op[i].op.scale.d[1],
			     op[i].op.scale.d[2]);
      matrix_mult(transform,s->data[s->top]);
      free_matrix(transform);
      break;
    
      //box,sphere,torus
    case BOX:
      add_box(tmp,op[i].op.box.d0[0],op[i].op.box.d0[1],op[i].op.box.d0[2],
	      op[i].op.box.d1[0],op[i].op.box.d1[1],op[i].op.box.d1[2]);
      matrix_mult(s->data[s->top],tmp);
      draw_polygons(tmp,t,g);
      free_matrix(tmp);
      //reset
      tmp=new_matrix(4,1000);
      break;
    case SPHERE:
      add_sphere(tmp,op[i].op.sphere.d[0],op[i].op.sphere.d[1],
		 op[i].op.sphere.d[2],op[i].op.sphere.r,0.01);
      matrix_mult(s->data[s->top],tmp);
      draw_polygons(tmp,t,g);
      free_matrix(tmp);
      //reset
      tmp=new_matrix(4,1000);
      break;
    case TORUS:
      add_torus(tmp,op[i].op.torus.d[0],op[i].op.torus.d[1],op[i].op.torus.d[2],
		op[i].op.torus.r0,op[i].op.torus.r1,0.01);
      matrix_mult(s->data[s->top],tmp);
      draw_polygons(tmp,t,g);
      free_matrix(tmp);
      //reset
      tmp=new_matrix(4,1000);
      break;
      
      //line
    case LINE:
      add_edge(tmp,op[i].op.line.p0[0],op[i].op.line.p0[1],op[i].op.line.p0[2],
	       op[i].op.line.p1[0],op[i].op.line.p1[1],op[i].op.line.p1[2]);
      matrix_mult(s->data[s->top],tmp);
      draw_lines(tmp,t,g);
      free_matrix(tmp);
      tmp=new_matrix(4,1000);//RESET
      break;
     
      //EVERYTIN else
    case SAVE:
      save_extension(t,op[i].op.save.p->name);
//.........这里部分代码省略.........

开发者ID:stuydw，项目名称:mdl，代码行数:101，代码来源:my_main.c

示例19: source


//.........这里部分代码省略.........
		      op[i].op.sphere.r, step);
	  //apply the current top origin
	  matrix_mult (s->data[s->top], tmp);
	  draw_polygons (tmp, t, g);
	  tmp->lastcol = 0;
	  break;

	case TORUS:
	  add_torus (tmp, op[i].op.torus.d[0],	//cx
		     op[i].op.torus.d[1],	//cy
		     op[i].op.torus.d[2],	//cz
		     op[i].op.torus.r0, op[i].op.torus.r1, step);
	  matrix_mult (s->data[s->top], tmp);
	  draw_polygons (tmp, t, g);
	  tmp->lastcol = 0;
	  break;

	case BOX:
	  add_box (tmp, op[i].op.box.d0[0],
		   op[i].op.box.d0[1],
		   op[i].op.box.d0[2],
		   op[i].op.box.d1[0],
		   op[i].op.box.d1[1], op[i].op.box.d1[2]);
	  matrix_mult (s->data[s->top], tmp);
	  draw_polygons (tmp, t, g);
	  tmp->lastcol = 0;
	  break;

	case LINE:
	  add_edge (tmp, op[i].op.line.p0[0],
		    op[i].op.line.p0[1],
		    op[i].op.line.p0[1],
		    op[i].op.line.p1[0],
		    op[i].op.line.p1[1], op[i].op.line.p1[1]);
	  draw_lines (tmp, t, g);
	  tmp->lastcol = 0;
	  break;

	case MOVE:
	  //get the factors
	  xval = op[i].op.move.d[0];
	  yval = op[i].op.move.d[1];
	  zval = op[i].op.move.d[2];

	  transform = make_translate (xval, yval, zval);
	  //multiply by the existing origin
	  matrix_mult (s->data[s->top], transform);
	  //put the new matrix on the top
	  copy_matrix (transform, s->data[s->top]);
	  free_matrix (transform);
	  break;

	case SCALE:
	  xval = op[i].op.scale.d[0];
	  yval = op[i].op.scale.d[1];
	  zval = op[i].op.scale.d[2];

	  transform = make_scale (xval, yval, zval);
	  matrix_mult (s->data[s->top], transform);
	  //put the new matrix on the top
	  copy_matrix (transform, s->data[s->top]);
	  free_matrix (transform);
	  break;

	case ROTATE:
	  xval = op[i].op.rotate.degrees * (M_PI / 180);

	  //get the axis
	  if (op[i].op.rotate.axis == 0)
	    transform = make_rotX (xval);
	  else if (op[i].op.rotate.axis == 1)
	    transform = make_rotY (xval);
	  else if (op[i].op.rotate.axis == 2)
	    transform = make_rotZ (xval);

	  matrix_mult (s->data[s->top], transform);
	  //put the new matrix on the top
	  copy_matrix (transform, s->data[s->top]);
	  free_matrix (transform);
	  break;

	case PUSH:
	  push (s);
	  break;
	case POP:
	  pop (s);
	  break;
	case SAVE:
	  save_extension (t, op[i].op.save.p->name);
	  break;
	case DISPLAY:
	  display (t);
	  break;
	}
    }

  free_stack (s);
  free_matrix (tmp);
  //free_matrix( transform );    
}

开发者ID:stuydw，项目名称:mdl-animation，代码行数:101，代码来源:my_main.c

示例20: source


//.........这里部分代码省略.........

      case MOVE:
	//get the factors
	if( op[ i ].op.move.p )
	  knob_value = lookup_symbol( op[ i ].op.move.p->name )->s.value;
	else
	  knob_value = 1;

	xval = op[i].op.move.d[0] * knob_value;
	yval = op[i].op.move.d[1] * knob_value;
	zval = op[i].op.move.d[2] * knob_value;

	transform = make_translate( xval, yval, zval );
	//multiply by the existing origin
	matrix_mult( s->data[ s->top ], transform );
	//put the new matrix on the top
	copy_matrix( transform, s->data[ s->top ] );
	free_matrix( transform );
	break;

      case SCALE:
	if( op[ i ].op.scale.p )
	  knob_value = lookup_symbol( op[ i ].op.scale.p->name )->s.value;
	else
	  knob_value = 1;
	xval = op[i].op.scale.d[0] * knob_value;
	yval = op[i].op.scale.d[1] * knob_value;
	zval = op[i].op.scale.d[2] * knob_value;
      
	transform = make_scale( xval, yval, zval );
	matrix_mult( s->data[ s->top ], transform );
	//put the new matrix on the top
	copy_matrix( transform, s->data[ s->top ] );
	free_matrix( transform );
	break;

      case ROTATE:
	if( op[ i ].op.rotate.p )
	  knob_value = lookup_symbol( op[ i ].op.rotate.p->name )->s.value;
	else
	  knob_value = 1;

	xval = op[i].op.rotate.degrees * ( M_PI / 180 );

	//get the axis
	if ( op[i].op.rotate.axis == 0 ) 
	  transform = make_rotX( xval * knob_value );
	else if ( op[i].op.rotate.axis == 1 ) 
	  transform = make_rotY( xval * knob_value );
	else if ( op[i].op.rotate.axis == 2 ) 
	  transform = make_rotZ( xval * knob_value );

	matrix_mult( s->data[ s->top ], transform );
	//put the new matrix on the top
	copy_matrix( transform, s->data[ s->top ] );
	free_matrix( transform );
	break;

      case PUSH:
	push( s );
	break;
      case POP:
	pop( s );
	break;
      case SAVE:
	save_extension( t, op[i].op.save.p->name );
	break;
      case DISPLAY:
	display( t );
	break;
      case SET:
	set_value( lookup_symbol( op[ i ].op.set.p->name ), op[ i ].op.set.val );
	break;
      case SETKNOBS:
	for( k = 0; k < lastsym; k++ )
	  if( symtab[ k ].type == SYM_VALUE )
	    symtab[ k ].s.value = op[ i ].op.setknobs.value;
	break;
      default:
	break;
      }
       
    }
      
    strcpy(dir,name);
    sprintf(p,"%03d", variable);
    strcat(dir,p);
    strcat(dir, ".png"

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ save_file函数代码示例发布时间：2022-05-30

C++ save_data函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17952|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8508|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9303|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7807|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件