C++ scheduler函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中scheduler函数的典型用法代码示例。如果您正苦于以下问题：C++ scheduler函数的具体用法？C++ scheduler怎么用？C++ scheduler使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了scheduler函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: TEST_F

TEST_F(TransactionTests, AbortTest) {
  for (auto test_type : TEST_TYPES) {
    concurrency::TransactionManagerFactory::Configure(test_type);
    auto &txn_manager = concurrency::TransactionManagerFactory::GetInstance();
    std::unique_ptr<storage::DataTable> table(
        TransactionTestsUtil::CreateTable());
    {
      TransactionScheduler scheduler(2, table.get(), &txn_manager);
      scheduler.Txn(0).Update(0, 100);
      scheduler.Txn(0).Abort();
      scheduler.Txn(1).Read(0);
      scheduler.Txn(1).Commit();

      scheduler.Run();

      EXPECT_EQ(RESULT_ABORTED, scheduler.schedules[0].txn_result);
      EXPECT_EQ(RESULT_SUCCESS, scheduler.schedules[1].txn_result);
      //printf("==========result=%d\n", int(scheduler.schedules[1].results[0]));
      EXPECT_EQ(0, scheduler.schedules[1].results[0]);
    }

    {
      TransactionScheduler scheduler(2, table.get(), &txn_manager);
      scheduler.Txn(0).Insert(100, 0);
      scheduler.Txn(0).Abort();
      scheduler.Txn(1).Read(100);
      scheduler.Txn(1).Commit();

      scheduler.Run();
      EXPECT_EQ(RESULT_ABORTED, scheduler.schedules[0].txn_result);
      EXPECT_EQ(RESULT_SUCCESS, scheduler.schedules[1].txn_result);
      EXPECT_EQ(-1, scheduler.schedules[1].results[0]);
    }
  }
}

开发者ID:seckcoder，项目名称:peloton，代码行数:35，代码来源:transaction_test.cpp

示例2: TEST_F

TEST_F(MVCCTest, AbortVersionChainTest) {
  LOG_INFO("AbortVersionChainTest");

  for (auto protocol : TEST_TYPES) {
    concurrency::TransactionManagerFactory::Configure(
        protocol, ISOLATION_LEVEL_TYPE_FULL);

    auto &txn_manager = concurrency::TransactionManagerFactory::GetInstance();
    std::unique_ptr<storage::DataTable> table(
        TransactionTestsUtil::CreateTable());
    {
      TransactionScheduler scheduler(2, table.get(), &txn_manager);
      scheduler.Txn(0).Update(0, 100);
      scheduler.Txn(0).Abort();
      scheduler.Txn(1).Read(0);
      scheduler.Txn(1).Commit();

      scheduler.Run();

      ValidateMVCC_OldToNew(table.get());
    }

    {
      TransactionScheduler scheduler(2, table.get(), &txn_manager);
      scheduler.Txn(0).Insert(100, 0);
      scheduler.Txn(0).Abort();
      scheduler.Txn(1).Read(100);
      scheduler.Txn(1).Commit();

      scheduler.Run();

      ValidateMVCC_OldToNew(table.get());
    }
  }
}

开发者ID:GeorgeErickson，项目名称:peloton，代码行数:35，代码来源:mvcc_test.cpp

示例3: tlb_handler

/**********************************************************************
												 TLB_HANDLER

	Caricato all'arrivo di una eccezione di tipo TLBTRAP.
	Affida il controllo del thread corrente ad un Trap Manager, se 
	specificato, altrimenti viene terminato tutto	il sottoalbero 
	corrispondente.

**********************************************************************/
void tlb_handler(){

	tcb_t *manager;

	/* TUTTE le operazioni sono equivalenti a quelle per SYSBP */
	current_thread->cpu_slice += (GET_TODLOW - current_thread_tod);
	current_thread->cpu_time += (GET_TODLOW - current_thread_tod);

	save_state(tlbtrap_oldarea, &(current_thread->t_state));

	manager = current_thread->tlbtrap_manager_thread;

	if (manager == NULL) {
		terminate(current_thread);
		current_thread = NULL;

		scheduler();
	}


	else {

		send(current_thread, manager, tlbtrap_oldarea->cause);

		current_thread->waiting_for = manager;

		insertThread(&wait_queue, current_thread);

		current_thread = NULL;

		scheduler();
	}

}

开发者ID:alainrk，项目名称:AmiKaya11，代码行数:43，代码来源:exceptions.c

示例4: TEST_F

TEST_F(SerializableTransactionTests, AbortTest) {
  for (auto protocol_type : PROTOCOL_TYPES) {
    concurrency::TransactionManagerFactory::Configure(protocol_type);
    auto &txn_manager = concurrency::TransactionManagerFactory::GetInstance();
    storage::DataTable *table = TestingTransactionUtil::CreateTable();
    {
      TransactionScheduler scheduler(2, table, &txn_manager);
      scheduler.Txn(0).Update(0, 100);
      scheduler.Txn(0).Abort();
      scheduler.Txn(1).Read(0);
      scheduler.Txn(1).Commit();

      scheduler.Run();

      EXPECT_EQ(ResultType::ABORTED, scheduler.schedules[0].txn_result);
      EXPECT_EQ(ResultType::SUCCESS, scheduler.schedules[1].txn_result);
      EXPECT_EQ(0, scheduler.schedules[1].results[0]);
    }

    {
      TransactionScheduler scheduler(2, table, &txn_manager);
      scheduler.Txn(0).Insert(100, 0);
      scheduler.Txn(0).Abort();
      scheduler.Txn(1).Read(100);
      scheduler.Txn(1).Commit();

      scheduler.Run();
      EXPECT_EQ(ResultType::ABORTED, scheduler.schedules[0].txn_result);
      EXPECT_EQ(ResultType::SUCCESS, scheduler.schedules[1].txn_result);
      EXPECT_EQ(-1, scheduler.schedules[1].results[0]);
    }
  }
}

开发者ID:wy4515，项目名称:peloton，代码行数:33，代码来源:serializable_transaction_test.cpp

示例5: DirtyReadTest

void DirtyReadTest() {
  auto &txn_manager = concurrency::TransactionManagerFactory::GetInstance();
  std::unique_ptr<storage::DataTable> table(
      TransactionTestsUtil::CreateTable());

  {
    TransactionScheduler scheduler(2, table.get(), &txn_manager);

    // T1 updates (0, ?) to (0, 1)
    // T2 reads (0, ?)
    // T1 commit
    // T2 commit
    scheduler.Txn(0).Update(0, 1);
    scheduler.Txn(1).Read(0);
    scheduler.Txn(0).Commit();
    scheduler.Txn(1).Commit();

    scheduler.Run();

    if (RESULT_SUCCESS == scheduler.schedules[0].txn_result &&
        RESULT_SUCCESS == scheduler.schedules[1].txn_result) {
      // Don't read uncommited value
      EXPECT_EQ(0, scheduler.schedules[1].results[0]);
    }
  }

  {
    TransactionScheduler scheduler(2, table.get(), &txn_manager);

    scheduler.Txn(0).Update(1, 1);
    scheduler.Txn(1).Read(1);
    scheduler.Txn(1).Commit();
    scheduler.Txn(0).Commit();

    scheduler.Run();

    if (RESULT_SUCCESS == scheduler.schedules[0].txn_result &&
        RESULT_SUCCESS == scheduler.schedules[1].txn_result) {
      // Don't read uncommited value
      EXPECT_EQ(0, scheduler.schedules[1].results[0]);
    }
  }

  {
    TransactionScheduler scheduler(2, table.get(), &txn_manager);

    scheduler.Txn(0).Delete(2);
    scheduler.Txn(1).Read(2);
    scheduler.Txn(0).Commit();
    scheduler.Txn(1).Commit();

    scheduler.Run();

    if (RESULT_SUCCESS == scheduler.schedules[0].txn_result &&
        RESULT_SUCCESS == scheduler.schedules[1].txn_result) {
      // Don't read uncommited value
      EXPECT_EQ(0, scheduler.schedules[1].results[0]);
    }
  }
}

开发者ID:eric-haibin-lin，项目名称:peloton-1，代码行数:60，代码来源:isolation_level_test.cpp

示例6: timer

/* Nota, hay que mandarle el EOI al PIC porque scheduler() NO vuelve,
 * Si no le mandamos el EOI nosotros no se lo manda nadie.
 * Además, hay que mandarle el EOI antes de hacer el cambio de contexto,
 * si lo hacemos después lo vamos a estar haciendo dos veces.
 * Una vez cuando nos vuelve a tocar la ejecución y volvemos de scheduler()
 * y la otra cuando volvemos al despachador de interrupciones.
 */
int timer( struct registers *r ) {
#define TIEMPO_ACTUALIZCION 10  //Totalmente arbitrario
    if (tarea_activa == -1) {
        pic8259A_send_EOI( r->nro );
        scheduler();
    }

    //Referente a la actualizacion de pantalla activa
    /*++contador_actualizar_pantalla;
    if(contador_actualizar_pantalla > TIEMPO_ACTUALIZCION) {
    	contador_actualizar_pantalla = 0;
    	if( tarea_en_pantalla != -1 )mostrar_slot(tarea_en_pantalla+1);
    }*/


    //Referente a la decrementacion de quantum de tarea_activa
    //Decrementamos quantum
    --tareas[tarea_activa].quantum_actual;

    //si termino, reestablecemos y cambiamos a la proxima llamando a scheduler
    if (tareas[tarea_activa].quantum_actual<=0) {
        //Restablecemos quantums gastado
        tareas[tarea_activa].quantum_actual = tareas[tarea_activa].quantum_fijo;
        //Llamamos al scheduler para que elija proxima tarea
        pic8259A_send_EOI( r->nro );
        scheduler();
    }

    return 0;
}

开发者ID:engrnasirkhan，项目名称:orga2kernel，代码行数:37，代码来源:kernel.c

示例7: interruptHandler

void
interruptHandler(IntType which)
{
  switch (which) {
  case TimerInt:
    DEBUG('e', "TimerInt interruput\n");
    if(current!=NULL){
      //printf("reinserting pid %d\n",current->pid);
      l_insert(readyq,current);
    }
    else{
      //printf("current is NULL at timer interrupt\n");
    }
    scheduler();
    break;
  case ConsoleReadInt:
    DEBUG('e', "ConsoleReadInt interrupt\n");
    if(consolewait !=NULL){
      V_kt_sem(consolewait);
    }
    
    if(current!=NULL){
      l_insert(readyq,current);
    }
    scheduler();
    
    break;
  case ConsoleWriteInt:
    DEBUG('e', "ConsoleWriteInt interrupt\n");
    
    if(writeok!=NULL){
      //printf("increment writeok\n");
      
      V_kt_sem(writeok);
    }
    /*
      if(current!=NULL){
      printf("reinserting pid %d\n",p->pid);
      l_insert(readyq,*p);
      }
    */
    else{
      //printf("this shouldn't happen\n");
    }
    scheduler();
    break;
  default:
    DEBUG('e', "Unknown interrupt\n");
    scheduler();
    break;
  }
  
}

开发者ID:Naturalclar，项目名称:Project4，代码行数:53，代码来源:exception.c

示例8: NosuchDebug

void
Region::UpdateSound() {

	std::string sound = params.sound;

	std::map<std::string,Sound>::iterator it = Sounds.find(sound);
	if ( it == Sounds.end() ) {
		NosuchDebug("Hey, Updatesound found invalid sound, region=%d sound=%s",id,sound.c_str());
		return;
	}

	NosuchDebug(1,"Region::UpdateSound region=%d sound=%s",
		id,params.sound.c_str());

	int ch = palette->findSoundChannel(sound,id);
	if ( ch < 0 ) {
		NosuchDebug("Region::UpdateSound Unable to find channel for sound=%s, using existing channel 1",sound.c_str());
		ch = 1;
	}
	if ( ch != _channel ) {
		NosuchDebug(1,"Existing channel for region %d is %d, new channel needs to be %d",
			id,_channel,ch);
		// Tempting to send ANO for the old channel, but the whole point
		// of the dynamic channel stuff is to avoid the need to cut off
		// old sounds when changing to new ones.
		_channel = ch;
		// Send ANO on the new channel, to terminate
		// anything currently playing there.
		scheduler()->ANO(_channel);
	} else {
		NosuchDebug(1,"Existing channel for region %d is %d",id,_channel);
	}
	MidiProgramChange* msg = Sound::ProgramChangeMsg(_channel,sound);
	if ( msg == NULL ) {
		NosuchDebug("HEY!! ProgramChangeMsg returned null for sound=%s",sound.c_str());
		return;
	}
	NosuchDebug("CHANGE rgn=%d sound=%s ch=%d",
		id,sound.c_str(),ch);
	NosuchDebug(1,"   progchange=%s", msg->DebugString().c_str());
	int loopid;
	if ( _loop == NULL )
		loopid = -1;
	else
		loopid = _loop->id();
	scheduler()->SendMidiMsg(msg,loopid);
	Sleep(150);  // Lame attempt to avoid Alchemy bug when it gets lots of Program Change messages
}

开发者ID:phonexhsu，项目名称:VizBench，代码行数:48，代码来源:Region.cpp

示例9: useExStVec

void useExStVec(int type){
    if(currentProcess!=NULL)  {
        /* Se ho già fatto spectrapvec per il tipo di eccezione*/
        if (currentProcess->excStVec[type*2]!=NULL){
            /* Salvo lo stato nella oldarea adeguata*/
            switch(type){
                case SPECTLB:
                	saveStateIn(tlb_old, currentProcess->excStVec[type*2]);
                    break;
                case SPECPGMT:
                	saveStateIn(pgmtrap_old, currentProcess->excStVec[type*2]);
                    break;
                case SPECSYSBP:
                	saveStateIn(sysbp_old, currentProcess->excStVec[type*2]);
                    break;
            }
            /* Carico lo stato dalla newarea */
            LDST(currentProcess->excStVec[(type*2)+1]);
        }else{
           /* Altrimenti tratto come una SYS2  */
           terminateProcess(currentProcess); 
           scheduler();
        }
    } 
}

开发者ID:illbexyz，项目名称:kaya-os-uarm，代码行数:25，代码来源:exceptions.c

示例10: main

int main (int argc, char *argv []) {
    int listen_fd, port;
    int client_fd;
    socklen_t socket_length;
    struct sockaddr_in client_socket;

    pthread_mutex_init(&mutex_lock, NULL);
    init_cache();
    Signal (SIGPIPE, SIG_IGN);
    if (argc != 2) {
	    fprintf(stderr, "usage: %s <port>\n", argv[0]);
	    exit(0);
    }

    port = atoi(argv[1]);
    listen_fd = Open_listenfd(port);
    socket_length = sizeof(client_socket);

    while (1) {
        client_fd = Accept(listen_fd, (SA*)&client_socket, &socket_length);   
        scheduler(client_fd);
    }
    pthread_mutex_destroy(&mutex_lock);
    clean_cache();
}

开发者ID:fxiang，项目名称:proxylab，代码行数:25，代码来源:proxy.c

示例11: GCFromMutator

/* Does not return - goes to scheduler */
void
GCFromMutator(Thread_t* curThread)
{
	Proc_t *proc = (Proc_t *) curThread->proc;
	mem_t alloc = (mem_t) curThread->saveregs[ALLOCPTR];
	mem_t limit = (mem_t) curThread->saveregs[ALLOCLIMIT];
	mem_t sysAllocLimit = proc->allocLimit;

	/* Put registers in stacklet */
	int i;
	Stacklet_t *stacklet = CurrentStacklet(curThread->stack);
	volatile reg_t* primaryRegs =
		&stacklet->bottomBaseRegs[primaryStackletOffset == 0 ? 0 : 32];
	for (i=0; i<32; i++)
		primaryRegs[i] = curThread->saveregs[i];

	/*
		Check that we are running on own stack and allocation pointers
		consistent
	*/
	if (paranoid)
		assert(proc == (getProc())); /* getProc is slow */
	assert(proc->userThread == curThread);
	assert((proc->stack - (int) (&proc)) < 1024) ;
	assert((limit == sysAllocLimit) || (limit == StopHeapLimit));
	assert(alloc <= sysAllocLimit);

	/* ReleaseJob(proc) */
	/* Update processor's info, GCRelease thread, but don't unmap */
	UpdateJob(proc);
	procChangeState(proc, Scheduler, 1003);
	scheduler(proc);
	DIE("scheduler returned");
}

开发者ID:RobertHarper，项目名称:TILT-Compiler，代码行数:35，代码来源:gc.c

示例12: timer_handler

// This is executed as part of the current running thread
// Activities to be done :
// 1. System time updating.
// 2. Timer object value decrementing and setting the flag
//    for time out event processing.
// 3. Set if necessary priority recomputation flag.
// 4. Update the time quantum left and cpu usage for the current thread.
//    If necessary call the scheduler function after enablig the timer.
// flags : runrun, kprunrun, priocompute, timeoutflag
void timer_handler (int irq)
{
    unsigned long oflags;

    /* Update system time value. HZ = 50 */
    millesecs += 20;
    if (millesecs >= 1000)
    {
        secs++;
        millesecs -= 1000;
        priocompute = 1;// Once in every one second recompute
        //priorities by applying decay factor.
    }

    // Without locking only the first timer object is observed.
    if (timers != NULL)
    {
        timers->timer_count -=  20;
        if (timers->timer_count <= 0) timeoutflag = 1;
    }

    // Update current thread cpu usage statistics
    rr_cl_tick((struct kthread *)current_thread);
    if (current_thread->kt_schedinf.sc_tqleft <= 0 || runrun == 1 || kprunrun == 1)
    {
        // Start scheduler function
        CLI;
        enable_timer();
        scheduler();
        STI;
    }
    return;
}

开发者ID:sunank200，项目名称:ATOM-OS，代码行数:42，代码来源:timer.c

示例13: schedule5

// Not possible to add tasks in a scheduled task atm
void
schedule5(TaskManager::ThreadManager& manager) {
    TaskManager::Scheduler scheduler(2, manager);
    bool stop = false;

    std::this_thread::sleep_for(std::chrono::milliseconds(10));

    TaskManager::Task task([&stop, &scheduler]() {
        unsigned int i = 1;
        while (!stop) {
            auto future = scheduler.runIn([i]() {
                return std::to_string(i) + " second elapsed";
            },
            std::chrono::milliseconds(60));
            std::cout << future.get() << " " << (int)stop << std::endl;
            ++i;
        }
    });
    task.setStopFunction([&stop]() {
        stop = true;
    });
    std::this_thread::sleep_for(std::chrono::milliseconds(10));
    scheduler.runAt(task, std::chrono::steady_clock::now());
    getchar();
}

开发者ID:Tastyep，项目名称:TaskManager，代码行数:26，代码来源:main.cpp

示例14: start_scheduler

void start_scheduler()
{
    SchedulerTask.sigint_handler = NULL;
    SchedulerTask.tss.cr3 = (uint32_t)PAGE_DIR;
    SchedulerTask.tss.eflags = 0xE0000011;
    GDT[7].limit_low = 0x67;
    GDT[7].base_low = (uint32_t)&SchedulerTask.tss & 0xFFFF;
    GDT[7].base_mid = ((uint32_t)&SchedulerTask.tss & 0xFF0000) >> 16;
    GDT[7]._FIXED_0 = 9;
    GDT[7]._FIXED_1 = 0;
    GDT[7].priv_level = 0;
    GDT[7].present = 1;
    GDT[7].limit_high = 0;
    GDT[7].AVL_to_sys = 0;
    GDT[7]._FIXED_2 = 0;
    GDT[7].big = 0;
    GDT[7].granularity = 0;
    GDT[7].base_high = (uint32_t)&SchedulerTask.tss >> 24;
    __asm__ volatile(
        ".intel_syntax noprefix;"
        "ltr ax;"
        ".att_syntax;"
        ::"a"(7 << 3):
    );
    scheduler();
}

开发者ID:richardtsai，项目名称:homework，代码行数:26，代码来源:scheduler.c

示例15: dispatcher_body

void dispatcher_body()
{
  int err, t0, t1;
  task_t* next; // Tarefa que ocupara o processador.

  enable_preemption(0);

  // Caso haver alguma tarefa na lista de prontas
  // o while eh executado.
  while (list_size(ready_list) > 0) {
    t0 = systime();
    next = scheduler();

    if (next) {
      ticks = 20;
      enable_preemption(1);
      t1 = systime();
      curr_task->proc_time += t0 - t1;   
      
      t0 = systime();
      err = task_switch(next); 
      t1 = systime();
      
      next->proc_time += t1 - t0;
      
      if (err == -1) {
        perror("dispatcher_body: task_switch failed.\n");
        return;
      }
    }
  }

  // Finaliza o dispatcher, voltando para o main.
  task_exit(0);
}

开发者ID:bmeneguele，项目名称:sist-op，代码行数:35，代码来源:task.c

示例16: TestScheduler

void TestScheduler(const char* msg, const PrimeMap& value, time_sec serialTime)
{
	ticks_t start = now();
	SCHEDULER scheduler(CoreCount);
	std::map<std::size_t, std::size_t> tasks;
	for (std::size_t i = 0; i < Count; i++)
	{
#ifdef VOID_TEST
		tasks[i] = scheduler.add_task([i]() -> void {Test(i); });
		tasks[MaxNum - i] = scheduler.add_task([i]() -> void {Test(MaxNum - i); });
#else
		tasks[i] = scheduler.add_task([i]() -> bool { return IsPrime(i); });
		tasks[MaxNum - i] = scheduler.add_task([i]() -> bool { return IsPrime(MaxNum - i); });
#endif
	}

	for (auto i = tasks.begin(); i != tasks.end(); ++i)
	{
#ifdef VOID_TEST
        scheduler.get_task_result(i->second);
#else
		if (value.at(i->first) != scheduler.get_task_result(i->second))
			throw 0;
#endif
	}
	time_sec parallelTime = ticks_to_time(now() - start);
	std::cout << msg << " time = " << parallelTime << " [s]  -  Serial time portion = " << parallelTime / (serialTime / 100.0) << " [%]" << std::endl;
	std::cout << msg << " calculation correct" << std::endl;
}

开发者ID:Dzejrou，项目名称:School-Work，代码行数:29，代码来源:Source.cpp

示例17: scheduler_

    thread_pool_os_executor<Scheduler>::thread_pool_os_executor(
            std::size_t num_punits, std::string const& affinity_desc)
      : scheduler_(nullptr),
        executor_name_(get_unique_name()),
        notifier_(get_notification_policy(executor_name_.c_str())),
        pool_(nullptr),
        num_threads_(num_punits)
    {
        if (num_punits > hpx::threads::hardware_concurrency())
        {
            HPX_THROW_EXCEPTION(bad_parameter,
                "thread_pool_os_executor<Scheduler>::thread_pool_os_executor",
                "max_punit shouldn't be larger than number of available "
                "OS-threads");
            return;
        }

        std::unique_ptr<Scheduler> scheduler(new Scheduler(num_punits));
        scheduler_ = scheduler.get();

        pool_.reset(new threads::detail::scheduled_thread_pool<Scheduler>(
            std::move(scheduler), notifier_, 0, executor_name_.c_str()));

        std::unique_lock<mutex_type> lk(mtx_);
        pool_->init(num_threads_, 0);

        if (!pool_->run(lk, num_threads_))
        {
            lk.unlock();
            HPX_THROW_EXCEPTION(invalid_status,
                "thread_pool_os_executor<Scheduler>::thread_pool_os_executor",
                "couldn't start thread_pool");
        }
    }

开发者ID:K-ballo，项目名称:hpx，代码行数:34，代码来源:thread_pool_os_executors.cpp

示例18: KOS

KOS() {
  
  /* Semaphores */
  writeOK =  make_kt_sem(0);
  writers = make_kt_sem(1);	
  readers = make_kt_sem(1);
  nElem = make_kt_sem(0);
  consoleWait = make_kt_sem(0);

  /* Generics */
  sys_stop_read = 0;
  current_pid = 0;
  console_size = 256;
  buffer_head, buffer_tail;
  
  // Zero out memory
  bzero(main_memory, MemorySize);
  bzero(memory_space_array, 8);
  
  /* Initializers */
  currentProcess = (PCB *) malloc(sizeof(PCB));
  initialize_console_buffer(&buffer_head, &buffer_tail);
  readyQ = new_dllist();
  found_node = make_jrb();
  pid_tree = make_jrb();
  kt_fork(initialize_user_process, (void *)kos_argv);
  kt_fork(console_buf_read, (void *)kos_argv[0]);
  kt_joinall();
  start_timer(10);
  scheduler();
}

开发者ID:Styxx，项目名称:CS170-W16，代码行数:31，代码来源:kos.c

示例19: main

int main(void)
{
   wdtdrv_disable();
   Clear_prescaler();
   scheduler();
   return 0;
}

开发者ID:epsil，项目名称:tunge，代码行数:7，代码来源:main.c

示例20: scheduler

// 다음 수행될 task를 선택하는 함수
void scheduler(void)		
{
	TaskInfo task;
	// gh_sch의 running_task가 가르키고 있는 taskinfo 받음
	task = task_get_runningtask();

	switch ( task->status ) {		
		// task상태가 TASK_RUN이나 TASK_SLEEP이면 선택됨
		case TASK_RUN:
		case TASK_SLEEP:
			break;
		// task상태가 TASK_KILL이면 delete하고, swiching함수 다시 호출
		case TASK_KILL:	
			task_delete(task);
			scheduler();
			break;
		// task상태가 TASK_YIELD이면 상태를 TASK_RUN으로 바꾸고 선택됨
		case TASK_YIELD:
			task->status = TASK_RUN;
			break;
		// task상태가 TASK_READY이면 싱테를 TASK_RUN으로 바꾸고 선택됨
		case TASK_READY:
			task->status = TASK_RUN;
			break;
	}
	// gh_sch의 running_task를 linkedlist의 다음 task로 설정
	task_next();
}

开发者ID:kdy707，项目名称:Study_Kernel，代码行数:29，代码来源:schedule.c

注：本文中的scheduler函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ scheduler_init函数代码示例发布时间：2022-05-30

C++ schedule_work函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17948|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8507|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8410|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9301|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8374|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8357|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7359|2022-11-06

客服电话

电子邮件

C++ scheduler函数代码示例

示例1: TEST_F

示例2: TEST_F

示例3: tlb_handler

示例4: TEST_F

示例5: DirtyReadTest

示例6: timer

示例7: interruptHandler

示例8: NosuchDebug

示例9: useExStVec

示例10: main

示例11: GCFromMutator

示例12: timer_handler

示例13: schedule5

示例14: start_scheduler

示例15: dispatcher_body

示例16: TestScheduler

示例17: scheduler_

示例18: KOS

示例19: main

示例20: scheduler

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

geekammo/MicroView-Arduino-Library: Micr

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053