C++ sdev_printk函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sdev_printk函数的典型用法代码示例。如果您正苦于以下问题：C++ sdev_printk函数的具体用法？C++ sdev_printk怎么用？C++ sdev_printk使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sdev_printk函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: blk_get_request

static struct request *get_alua_req(struct scsi_device *sdev,
                                    void *buffer, unsigned buflen, int rw)
{
    struct request *rq;
    struct request_queue *q = sdev->request_queue;

    rq = blk_get_request(q, rw, GFP_NOIO);

    if (!rq) {
        sdev_printk(KERN_INFO, sdev,
                    "%s: blk_get_request failed\n", __func__);
        return NULL;
    }

    if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
        blk_put_request(rq);
        sdev_printk(KERN_INFO, sdev,
                    "%s: blk_rq_map_kern failed\n", __func__);
        return NULL;
    }

    rq->cmd_type = REQ_TYPE_BLOCK_PC;
    rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
                     REQ_FAILFAST_DRIVER;
    rq->retries = ALUA_FAILOVER_RETRIES;
    rq->timeout = ALUA_FAILOVER_TIMEOUT;

    return rq;
}

开发者ID:JackWangCUMT，项目名称:linux，代码行数:29，代码来源:scsi_dh_alua.c

示例2: alua_std_inquiry

/*
 * alua_std_inquiry - Evaluate standard INQUIRY command
 * @sdev: device to be checked
 *
 * Just extract the TPGS setting to find out if ALUA
 * is supported.
 */
static int alua_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
{
	int err;

	err = submit_std_inquiry(sdev, h);

	if (err != SCSI_DH_OK)
		return err;

	/* Check TPGS setting */
	h->tpgs = (h->inq[5] >> 4) & 0x3;
	switch (h->tpgs) {
	case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
		sdev_printk(KERN_INFO, sdev,
			    "%s: supports implicit and explicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_EXPLICIT:
		sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_IMPLICIT:
		sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	default:
		h->tpgs = TPGS_MODE_NONE;
		sdev_printk(KERN_INFO, sdev, "%s: not supported\n",
			    ALUA_DH_NAME);
		err = SCSI_DH_DEV_UNSUPP;
		break;
	}

	return err;
}

开发者ID:Addision，项目名称:LVS，代码行数:42，代码来源:scsi_dh_alua.c

示例3: alua_check_tpgs

/*
 * alua_check_tpgs - Evaluate TPGS setting
 * @sdev: device to be checked
 *
 * Examine the TPGS setting of the sdev to find out if ALUA
 * is supported.
 */
static int alua_check_tpgs(struct scsi_device *sdev, struct alua_dh_data *h)
{
	int err = SCSI_DH_OK;

	h->tpgs = scsi_device_tpgs(sdev);
	switch (h->tpgs) {
	case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
		sdev_printk(KERN_INFO, sdev,
			    "%s: supports implicit and explicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_EXPLICIT:
		sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_IMPLICIT:
		sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	default:
		h->tpgs = TPGS_MODE_NONE;
		sdev_printk(KERN_INFO, sdev, "%s: not supported\n",
			    ALUA_DH_NAME);
		err = SCSI_DH_DEV_UNSUPP;
		break;
	}

	return err;
}

开发者ID:ARMWorks，项目名称:FA_2451_Linux_Kernel，代码行数:36，代码来源:scsi_dh_alua.c

示例4: parse_sp_info_reply

static int parse_sp_info_reply(struct scsi_device *sdev,
			       struct clariion_dh_data *csdev)
{
	int err = SCSI_DH_OK;

	/* check for in-progress ucode upgrade (NDU) */
	if (csdev->buffer[48] != 0) {
		sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
			    "ucode upgrade NDU operation while finding "
			    "current active SP.", CLARIION_NAME);
		err = SCSI_DH_DEV_TEMP_BUSY;
		goto out;
	}
	if (csdev->buffer[4] > 2) {
		/* Invalid buffer format */
		sdev_printk(KERN_NOTICE, sdev,
			    "%s: invalid VPD page 0xC0 format\n",
			    CLARIION_NAME);
		err = SCSI_DH_NOSYS;
		goto out;
	}
	switch (csdev->buffer[28] & 0x0f) {
	case 6:
		sdev_printk(KERN_NOTICE, sdev,
			    "%s: ALUA failover mode detected\n",
			    CLARIION_NAME);
		break;
	case 4:
		/* Linux failover */
		break;
	default:
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid failover mode %d\n",
			    CLARIION_NAME, csdev->buffer[28] & 0x0f);
		err = SCSI_DH_NOSYS;
		goto out;
	}

	csdev->default_sp = csdev->buffer[5];
	csdev->lun_state = csdev->buffer[4];
	csdev->current_sp = csdev->buffer[8];
	csdev->port = csdev->buffer[7];
	if (csdev->lun_state == CLARIION_LUN_OWNED)
		sdev->access_state = SCSI_ACCESS_STATE_OPTIMAL;
	else
		sdev->access_state = SCSI_ACCESS_STATE_STANDBY;
	if (csdev->default_sp == csdev->current_sp)
		sdev->access_state |= SCSI_ACCESS_STATE_PREFERRED;
out:
	return err;
}

开发者ID:020gzh，项目名称:linux，代码行数:51，代码来源:scsi_dh_emc.c

示例5: clariion_bus_attach

static int clariion_bus_attach(struct scsi_device *sdev)
{
	struct scsi_dh_data *scsi_dh_data;
	struct clariion_dh_data *h;
	unsigned long flags;
	int err;

	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
			       + sizeof(*h) , GFP_KERNEL);
	if (!scsi_dh_data) {
		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
			    CLARIION_NAME);
		return -ENOMEM;
	}

	scsi_dh_data->scsi_dh = &clariion_dh;
	h = (struct clariion_dh_data *) scsi_dh_data->buf;
	h->lun_state = CLARIION_LUN_UNINITIALIZED;
	h->default_sp = CLARIION_UNBOUND_LU;
	h->current_sp = CLARIION_UNBOUND_LU;

	err = clariion_std_inquiry(sdev, h);
	if (err != SCSI_DH_OK)
		goto failed;

	err = clariion_send_inquiry(sdev, h);
	if (err != SCSI_DH_OK)
		goto failed;

	if (!try_module_get(THIS_MODULE))
		goto failed;

	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
	sdev->scsi_dh_data = scsi_dh_data;
	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);

	sdev_printk(KERN_INFO, sdev,
		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
		    CLARIION_NAME, h->current_sp + 'A',
		    h->port, lun_state[h->lun_state],
		    h->default_sp + 'A');

	return 0;

failed:
	kfree(scsi_dh_data);
	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
		    CLARIION_NAME);
	return -EINVAL;
}

开发者ID:Atrix-Dev-Team，项目名称:kernel-MB860，代码行数:50，代码来源:scsi_dh_emc.c

示例6: parse_sp_info_reply

static int parse_sp_info_reply(struct scsi_device *sdev, int result,
		int *default_sp, int *current_sp, int *new_current_sp)
{
	int err = SCSI_DH_OK;
	struct clariion_dh_data *csdev = get_clariion_data(sdev);

	if (result == 0) {
		/* check for in-progress ucode upgrade (NDU) */
		if (csdev->buffer[48] != 0) {
			sdev_printk(KERN_NOTICE, sdev, "Detected in-progress "
			       "ucode upgrade NDU operation while finding "
			       "current active SP.");
			err = SCSI_DH_DEV_TEMP_BUSY;
		} else {
			*default_sp = csdev->buffer[5];

			if (csdev->buffer[4] == 2)
				/* SP for path is current */
				*current_sp = csdev->buffer[8];
			else {
				if (csdev->buffer[4] == 1)
					/* SP for this path is NOT current */
					if (csdev->buffer[8] == 0)
						*current_sp = 1;
					else
						*current_sp = 0;
				else
					/* unbound LU or LUNZ */
					*current_sp = CLARIION_UNBOUND_LU;
			}
			*new_current_sp =  csdev->buffer[8];
		}
	} else {
		struct scsi_sense_hdr sshdr;

		err = SCSI_DH_IO;

		if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
							   &sshdr))
			sdev_printk(KERN_ERR, sdev, "Found valid sense data "
			      "0x%2x, 0x%2x, 0x%2x while finding current "
			      "active SP.", sshdr.sense_key, sshdr.asc,
			      sshdr.ascq);
		else
			sdev_printk(KERN_ERR, sdev, "Error 0x%x finding "
			      "current active SP.", result);
	}

	return err;
}

开发者ID:maraz，项目名称:linux-2.6，代码行数:50，代码来源:scsi_dh_emc.c

示例7: stpg_endio

/*
 * alua_stpg - Evaluate SET TARGET GROUP STATES
 * @sdev: the device to be evaluated
 * @state: the new target group state
 *
 * Send a SET TARGET GROUP STATES command to the device.
 * We only have to test here if we should resubmit the command;
 * any other error is assumed as a failure.
 */
static void stpg_endio(struct request *req, int error)
{
	struct alua_dh_data *h = req->end_io_data;
	struct scsi_sense_hdr sense_hdr;
	unsigned err = SCSI_DH_OK;

	if (host_byte(req->errors) != DID_OK ||
	    msg_byte(req->errors) != COMMAND_COMPLETE) {
		err = SCSI_DH_IO;
		goto done;
	}

	if (req->sense_len > 0) {
		err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
					   &sense_hdr);
		if (!err) {
			err = SCSI_DH_IO;
			goto done;
		}
		err = alua_check_sense(h->sdev, &sense_hdr);
		if (err == ADD_TO_MLQUEUE) {
			err = SCSI_DH_RETRY;
			goto done;
		}
		sdev_printk(KERN_INFO, h->sdev,
			    "%s: stpg sense code: %02x/%02x/%02x\n",
			    ALUA_DH_NAME, sense_hdr.sense_key,
			    sense_hdr.asc, sense_hdr.ascq);
		err = SCSI_DH_IO;
	} else if (error)
		err = SCSI_DH_IO;

	if (err == SCSI_DH_OK) {
		h->state = TPGS_STATE_OPTIMIZED;
		sdev_printk(KERN_INFO, h->sdev,
			    "%s: port group %02x switched to state %c\n",
			    ALUA_DH_NAME, h->group_id,
			    print_alua_state(h->state));
	}
done:
	req->end_io_data = NULL;
	__blk_put_request(req->q, req);
	if (h->callback_fn) {
		h->callback_fn(h->callback_data, err);
		h->callback_fn = h->callback_data = NULL;
	}
	return;
}

开发者ID:3null，项目名称:linux，代码行数:57，代码来源:scsi_dh_alua.c

示例8: submit_vpd_inquiry

/*
 * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
 * @sdev: sdev the command should be sent to
 */
static int submit_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
{
	struct request *rq;
	int err = SCSI_DH_RES_TEMP_UNAVAIL;

	rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
	if (!rq)
		goto done;

	/* Prepare the command. */
	rq->cmd[0] = INQUIRY;
	rq->cmd[1] = 1;
	rq->cmd[2] = 0x83;
	rq->cmd[4] = h->bufflen;
	rq->cmd_len = COMMAND_SIZE(INQUIRY);

	rq->sense = h->sense;
	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	rq->sense_len = h->senselen = 0;

	err = blk_execute_rq(rq->q, NULL, rq, 1);
	if (err == -EIO) {
		sdev_printk(KERN_INFO, sdev,
			    "%s: evpd inquiry failed with %x\n",
			    ALUA_DH_NAME, rq->errors);
		h->senselen = rq->sense_len;
		err = SCSI_DH_IO;
	}
	blk_put_request(rq);
done:
	return err;
}

开发者ID:285452612，项目名称:ali_kernel，代码行数:36，代码来源:scsi_dh_alua.c

示例9: start_stop_endio

static void start_stop_endio(struct request *req, int error)
{
	struct hp_sw_dh_data *h = req->end_io_data;
	unsigned err = SCSI_DH_OK;

	if (error || host_byte(req->errors) != DID_OK ||
			msg_byte(req->errors) != COMMAND_COMPLETE) {
		sdev_printk(KERN_WARNING, h->sdev,
			    "%s: sending start_stop_unit failed with %x\n",
			    HP_SW_NAME, req->errors);
		err = SCSI_DH_IO;
		goto done;
	}

	if (req->sense_len > 0) {
		err = start_done(h->sdev, h->sense);
		if (err == SCSI_DH_RETRY) {
			err = SCSI_DH_IO;
			if (--h->retry_cnt) {
				blk_put_request(req);
				err = hp_sw_start_stop(h);
				if (err == SCSI_DH_OK)
					return;
			}
		}
	}
done:
	blk_put_request(req);
	if (h->callback_fn) {
		h->callback_fn(h->callback_data, err);
		h->callback_fn = h->callback_data = NULL;
	}
	return;

}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:35，代码来源:scsi_dh_hp_sw.c

示例10: scsi_print_command

void scsi_print_command(struct scsi_cmnd *cmd)
{
	/* Assume appended output (i.e. not at start of line) */
	sdev_printk("", cmd->device, "\n");
	printk(KERN_INFO "        command: ");
	scsi_print_cdb(cmd->cmnd, cmd->cmd_len, 0);
}

开发者ID:xf739645524，项目名称:kernel-rhel5，代码行数:7，代码来源:constants.c

示例11: submit_rtpg

/*
 * submit_rtpg - Issue a REPORT TARGET GROUP STATES command
 * @sdev: sdev the command should be sent to
 */
static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
{
	struct request *rq;
	int err = SCSI_DH_RES_TEMP_UNAVAIL;

	rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
	if (!rq)
		goto done;

	/* Prepare the command. */
	rq->cmd[0] = MAINTENANCE_IN;
	rq->cmd[1] = MI_REPORT_TARGET_PGS;
	rq->cmd[6] = (h->bufflen >> 24) & 0xff;
	rq->cmd[7] = (h->bufflen >> 16) & 0xff;
	rq->cmd[8] = (h->bufflen >>  8) & 0xff;
	rq->cmd[9] = h->bufflen & 0xff;
	rq->cmd_len = COMMAND_SIZE(MAINTENANCE_IN);

	rq->sense = h->sense;
	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	rq->sense_len = h->senselen = 0;

	err = blk_execute_rq(rq->q, NULL, rq, 1);
	if (err == -EIO) {
		sdev_printk(KERN_INFO, sdev,
			    "%s: rtpg failed with %x\n",
			    ALUA_DH_NAME, rq->errors);
		h->senselen = rq->sense_len;
		err = SCSI_DH_IO;
	}
	blk_put_request(rq);
done:
	return err;
}

开发者ID:285452612，项目名称:ali_kernel，代码行数:38，代码来源:scsi_dh_alua.c

示例12: tur_done

/*
 * tur_done - Handle TEST UNIT READY return status
 * @sdev: sdev the command has been sent to
 * @errors: blk error code
 *
 * Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
 */
static int tur_done(struct scsi_device *sdev, struct hp_sw_dh_data *h,
		    struct scsi_sense_hdr *sshdr)
{
	int ret = SCSI_DH_IO;

	switch (sshdr->sense_key) {
	case UNIT_ATTENTION:
		ret = SCSI_DH_IMM_RETRY;
		break;
	case NOT_READY:
		if (sshdr->asc == 0x04 && sshdr->ascq == 2) {
			/*
			 * LUN not ready - Initialization command required
			 *
			 * This is the passive path
			 */
			h->path_state = HP_SW_PATH_PASSIVE;
			ret = SCSI_DH_OK;
			break;
		}
		/* Fallthrough */
	default:
		sdev_printk(KERN_WARNING, sdev,
			   "%s: sending tur failed, sense %x/%x/%x\n",
			   HP_SW_NAME, sshdr->sense_key, sshdr->asc,
			   sshdr->ascq);
		break;
	}
	return ret;
}

开发者ID:BWhitten，项目名称:linux-stable，代码行数:37，代码来源:scsi_dh_hp_sw.c

示例13: hp_sw_tur

/*
 * hp_sw_tur - Send TEST UNIT READY
 * @sdev: sdev command should be sent to
 *
 * Use the TEST UNIT READY command to determine
 * the path state.
 */
static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
{
	unsigned char cmd[6] = { TEST_UNIT_READY };
	struct scsi_sense_hdr sshdr;
	int ret = SCSI_DH_OK, res;
	u64 req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
		REQ_FAILFAST_DRIVER;

retry:
	res = scsi_execute(sdev, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
			HP_SW_TIMEOUT, HP_SW_RETRIES, req_flags, 0, NULL);
	if (res) {
		if (scsi_sense_valid(&sshdr))
			ret = tur_done(sdev, h, &sshdr);
		else {
			sdev_printk(KERN_WARNING, sdev,
				    "%s: sending tur failed with %x\n",
				    HP_SW_NAME, res);
			ret = SCSI_DH_IO;
		}
	} else {
		h->path_state = HP_SW_PATH_ACTIVE;
		ret = SCSI_DH_OK;
	}
	if (ret == SCSI_DH_IMM_RETRY)
		goto retry;

	return ret;
}

开发者ID:BWhitten，项目名称:linux-stable，代码行数:36，代码来源:scsi_dh_hp_sw.c

示例14: clariion_bus_attach

static int clariion_bus_attach(struct scsi_device *sdev)
{
	struct clariion_dh_data *h;
	int err;

	h = kzalloc(sizeof(*h) , GFP_KERNEL);
	if (!h)
		return -ENOMEM;
	h->lun_state = CLARIION_LUN_UNINITIALIZED;
	h->default_sp = CLARIION_UNBOUND_LU;
	h->current_sp = CLARIION_UNBOUND_LU;

	err = clariion_std_inquiry(sdev, h);
	if (err != SCSI_DH_OK)
		goto failed;

	err = clariion_send_inquiry(sdev, h);
	if (err != SCSI_DH_OK)
		goto failed;

	sdev_printk(KERN_INFO, sdev,
		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
		    CLARIION_NAME, h->current_sp + 'A',
		    h->port, lun_state[h->lun_state],
		    h->default_sp + 'A');

	sdev->handler_data = h;
	return 0;

failed:
	kfree(h);
	return -EINVAL;
}

开发者ID:020gzh，项目名称:linux，代码行数:33，代码来源:scsi_dh_emc.c

示例15: clariion_send_inquiry

static int clariion_send_inquiry(struct scsi_device *sdev,
				 struct clariion_dh_data *csdev)
{
	int err, retry = CLARIION_RETRIES;

retry:
	err = send_inquiry_cmd(sdev, 0xC0, csdev);
	if (err != SCSI_DH_OK && csdev->senselen) {
		struct scsi_sense_hdr sshdr;

		err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
					   &sshdr);
		if (!err)
			return SCSI_DH_IO;

		err = clariion_check_sense(sdev, &sshdr);
		if (retry > 0 && err == ADD_TO_MLQUEUE) {
			retry--;
			goto retry;
		}
		sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
			    "%02x/%02x/%02x\n", CLARIION_NAME,
			      sshdr.sense_key, sshdr.asc, sshdr.ascq);
		err = SCSI_DH_IO;
	} else {
		err = parse_sp_info_reply(sdev, csdev);
	}
	return err;
}

开发者ID:020gzh，项目名称:linux，代码行数:29，代码来源:scsi_dh_emc.c

示例16: hp_sw_bus_attach

static int hp_sw_bus_attach(struct scsi_device *sdev)
{
	struct hp_sw_dh_data *h;
	int ret;

	h = kzalloc(sizeof(*h), GFP_KERNEL);
	if (!h)
		return -ENOMEM;
	h->path_state = HP_SW_PATH_UNINITIALIZED;
	h->retries = HP_SW_RETRIES;
	h->sdev = sdev;

	ret = hp_sw_tur(sdev, h);
	if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
		goto failed;

	sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
		    HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
		    "active":"passive");

	sdev->handler_data = h;
	return 0;
failed:
	kfree(h);
	return -EINVAL;
}

开发者ID:BWhitten，项目名称:linux-stable，代码行数:26，代码来源:scsi_dh_hp_sw.c

示例17: send_inquiry_cmd

static int send_inquiry_cmd(struct scsi_device *sdev, int page,
			    struct clariion_dh_data *csdev)
{
	struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
	int err;

	if (!rq)
		return SCSI_DH_RES_TEMP_UNAVAIL;

	rq->sense = csdev->sense;
	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	rq->sense_len = csdev->senselen = 0;

	rq->cmd[0] = INQUIRY;
	if (page != 0) {
		rq->cmd[1] = 1;
		rq->cmd[2] = page;
	}
	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
	if (err == -EIO) {
		sdev_printk(KERN_INFO, sdev,
			    "%s: failed to send %s INQUIRY: %x\n",
			    CLARIION_NAME, page?"EVPD":"standard",
			    rq->errors);
		csdev->senselen = rq->sense_len;
		err = SCSI_DH_IO;
	}

	blk_put_request(rq);

	return err;
}

开发者ID:020gzh，项目名称:linux，代码行数:32，代码来源:scsi_dh_emc.c

示例18: stpg_endio

/*
 * stpg_endio - Evaluate SET TARGET GROUP STATES
 * @sdev: the device to be evaluated
 * @state: the new target group state
 *
 * Evaluate a SET TARGET GROUP STATES command response.
 */
static void stpg_endio(struct request *req, int error)
{
	struct alua_dh_data *h = req->end_io_data;
	struct scsi_sense_hdr sense_hdr;
	unsigned err = SCSI_DH_OK;

	if (host_byte(req->errors) != DID_OK ||
	    msg_byte(req->errors) != COMMAND_COMPLETE) {
		err = SCSI_DH_IO;
		goto done;
	}

	if (scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
				 &sense_hdr)) {
		if (sense_hdr.sense_key == NOT_READY &&
		    sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) {
			/* ALUA state transition already in progress */
			err = SCSI_DH_OK;
			goto done;
		}
		if (sense_hdr.sense_key == UNIT_ATTENTION) {
			err = SCSI_DH_RETRY;
			goto done;
		}
		sdev_printk(KERN_INFO, h->sdev, "%s: stpg failed\n",
			    ALUA_DH_NAME);
		scsi_print_sense_hdr(h->sdev, ALUA_DH_NAME, &sense_hdr);
		err = SCSI_DH_IO;
	} else if (error)
		err = SCSI_DH_IO;

	if (err == SCSI_DH_OK) {
		h->state = TPGS_STATE_OPTIMIZED;
		sdev_printk(KERN_INFO, h->sdev,
			    "%s: port group %02x switched to state %c\n",
			    ALUA_DH_NAME, h->group_id,
			    print_alua_state(h->state));
	}
done:
	req->end_io_data = NULL;
	__blk_put_request(req->q, req);
	if (h->callback_fn) {
		h->callback_fn(h->callback_data, err);
		h->callback_fn = h->callback_data = NULL;
	}
	return;
}

开发者ID:a2hojsjsjs，项目名称:linux，代码行数:54，代码来源:scsi_dh_alua.c

示例19: parse_sp_model

static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
{
	unsigned char len = buffer[4] + 5;
	char *sp_model = NULL;
	unsigned char sp_len, serial_len;

	if (len < 160) {
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid information section length %d\n",
			    CLARIION_NAME, len);
		/* Check for old FC arrays */
		if (!strncmp(buffer + 8, "DGC", 3)) {
			/* Old FC array, not supporting extended information */
			sp_model = emc_default_str;
		}
		goto out;
	}

	/*
	 * Parse extended information for SP model number
	 */
	serial_len = buffer[160];
	if (serial_len == 0 || serial_len + 161 > len) {
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid array serial number length %d\n",
			    CLARIION_NAME, serial_len);
		goto out;
	}
	sp_len = buffer[99];
	if (sp_len == 0 || serial_len + sp_len + 161 > len) {
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid model number length %d\n",
			    CLARIION_NAME, sp_len);
		goto out;
	}
	sp_model = &buffer[serial_len + 161];
	/* Strip whitespace at the end */
	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
		sp_len--;

	sp_model[sp_len] = '\0';

out:
	return sp_model;
}

开发者ID:020gzh，项目名称:linux，代码行数:45，代码来源:scsi_dh_emc.c

示例20: alua_bus_attach

/*
 * alua_bus_attach - Attach device handler
 * @sdev: device to be attached to
 */
static int alua_bus_attach(struct scsi_device *sdev)
{
	struct scsi_dh_data *scsi_dh_data;
	struct alua_dh_data *h;
	unsigned long flags;
	int err = SCSI_DH_OK;

	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
			       + sizeof(*h) , GFP_KERNEL);
	if (!scsi_dh_data) {
		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
			    ALUA_DH_NAME);
		return -ENOMEM;
	}

	scsi_dh_data->scsi_dh = &alua_dh;
	h = (struct alua_dh_data *) scsi_dh_data->buf;
	h->tpgs = TPGS_MODE_UNINITIALIZED;
	h->state = TPGS_STATE_OPTIMIZED;
	h->group_id = -1;
	h->rel_port = -1;
	h->buff = h->inq;
	h->bufflen = ALUA_INQUIRY_SIZE;
	h->sdev = sdev;

	err = alua_initialize(sdev, h);
	if ((err != SCSI_DH_OK) && (err != SCSI_DH_DEV_OFFLINED))
		goto failed;

	if (!try_module_get(THIS_MODULE))
		goto failed;

	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
	sdev->scsi_dh_data = scsi_dh_data;
	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
	sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME);

	return 0;

failed:
	kfree(scsi_dh_data);
	sdev_printk(KERN_ERR, sdev, "%s: not attached\n", ALUA_DH_NAME);
	return -EINVAL;
}

开发者ID:ashang，项目名称:xpenology-3.x，代码行数:48，代码来源:scsi_dh_alua.c

注：本文中的sdev_printk函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sdev_to_zfcp函数代码示例发布时间：2022-05-30

C++ sdelay函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17947|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8505|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8410|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9300|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8374|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8357|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7358|2022-11-06

客服电话

电子邮件

C++ sdev_printk函数代码示例

示例1: blk_get_request

示例2: alua_std_inquiry

示例3: alua_check_tpgs

示例4: parse_sp_info_reply

示例5: clariion_bus_attach

示例6: parse_sp_info_reply

示例7: stpg_endio

示例8: submit_vpd_inquiry

示例9: start_stop_endio

示例10: scsi_print_command

示例11: submit_rtpg

示例12: tur_done

示例13: hp_sw_tur

示例14: clariion_bus_attach

示例15: clariion_send_inquiry

示例16: hp_sw_bus_attach

示例17: send_inquiry_cmd

示例18: stpg_endio

示例19: parse_sp_model

示例20: alua_bus_attach

请发表评论

全部评论

上一篇：

下一篇：

opencost/opencost: Cross-cloud cost allo

Sazito/phoenix: A simple boilerplate tha

mokarakaya/spring-boot-multi-module-mave

用MATLAB对信号做频谱分析 - 逸阳

MiguelCatalan/MaterialSearchView: Cute l

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053