C++ sdio_release_host函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sdio_release_host函数的典型用法代码示例。如果您正苦于以下问题：C++ sdio_release_host函数的具体用法？C++ sdio_release_host怎么用？C++ sdio_release_host使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sdio_release_host函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mwifiex_read_data_sync

/*
 * This function reads multiple data from SDIO card memory.
 */
static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer,
				  u32 len, u32 port, u8 claim)
{
	struct sdio_mmc_card *card = adapter->card;
	int ret;
	u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE
		       : BLOCK_MODE;
	u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1;
	u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE)
			: len;
	u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK);

	if (claim)
		sdio_claim_host(card->func);

	ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size);

	if (claim)
		sdio_release_host(card->func);

	return ret;
}

开发者ID:174high，项目名称:dell-driver，代码行数:25，代码来源:sdio.c

示例2: ssb_sdio_read32

static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
{
	struct ssb_bus *bus = dev->bus;
	u32 val = 0xffffffff;
	int error = 0;

	sdio_claim_host(bus->host_sdio);
	if (unlikely(ssb_sdio_switch_core(bus, dev)))
		goto out;
	offset |= bus->sdio_sbaddr & 0xffff;
	offset &= SBSDIO_SB_OFT_ADDR_MASK;
	offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/*                    */
	val = sdio_readl(bus->host_sdio, offset, &error);
	if (error) {
		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
			bus->sdio_sbaddr >> 16, offset, val, error);
	}
out:
	sdio_release_host(bus->host_sdio);

	return val;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:22，代码来源:sdio.c

示例3: sdio_free_irq

void sdio_free_irq(struct dvobj_priv *dvobj)
{
    PSDIO_DATA psdio_data;
    struct sdio_func *func;
    int err;

    if (dvobj->irq_alloc) {
        psdio_data = &dvobj->intf_data;
        func = psdio_data->func;

        if (func) {
            sdio_claim_host(func);
            err = sdio_release_irq(func);
            if (err)
            {
				DBG_871X("%s: sdio_release_irq FAIL(%d)!\n", __func__, err);
            }
            sdio_release_host(func);
        }
        dvobj->irq_alloc = 0;
    }
}

开发者ID:yangkunming99，项目名称:linux_inic，代码行数:22，代码来源:sdio_intf.c

示例4: sd_cmd52_write

/*
 * Return:
 *	0		Success
 *	others	Fail
 */
s32 sd_cmd52_write(PSDIO_DATA psdio, u32 addr, u32 cnt, u8 *pdata)
{
	int err, i;
	struct sdio_func *func;
	bool claim_needed;

_func_enter_;

	err = 0;
	func = psdio->func;
	claim_needed = rtw_sdio_claim_host_needed(func);

	if (claim_needed)
		sdio_claim_host(func);
	err = _sd_cmd52_write(psdio, addr, cnt, pdata);
	if (claim_needed)
		sdio_release_host(func);

_func_exit_;

	return err;
}

开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:27，代码来源:sdio_ops_linux.c

示例5: woal_read_data_sync

/**
 *  @brief This function reads multiple bytes from card memory
 *
 *  @param handle   A Pointer to the moal_handle structure
 *  @param pmbuf    Pointer to mlan_buffer structure
 *  @param port     Port
 *  @param timeout  Time out value
 *
 *  @return         MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
 */
mlan_status
woal_read_data_sync(moal_handle * handle, mlan_buffer * pmbuf, t_u32 port,
		    t_u32 timeout)
{
	mlan_status ret = MLAN_STATUS_FAILURE;
	t_u8 *buffer = (t_u8 *) (pmbuf->pbuf + pmbuf->data_offset);
	t_u8 blkmode =
		(port & MLAN_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE;
	t_u32 blksz = (blkmode == BLOCK_MODE) ? MLAN_SDIO_BLOCK_SIZE : 1;
	t_u32 blkcnt =
		(blkmode ==
		 BLOCK_MODE) ? (pmbuf->data_len /
				MLAN_SDIO_BLOCK_SIZE) : pmbuf->data_len;
	t_u32 ioport = (port & MLAN_SDIO_IO_PORT_MASK);
	int status = 0;
	if (pmbuf->use_count > 1)
		return woal_sdio_rw_mb(handle, pmbuf, port, MFALSE);
#ifdef SDIO_MMC_DEBUG
	handle->cmd53r = 1;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 32)
	sdio_claim_host(((struct sdio_mmc_card *)handle->card)->func);
#endif
	status = sdio_readsb(((struct sdio_mmc_card *)handle->card)->func,
			     buffer, ioport, blkcnt * blksz);
	if (!status) {
		ret = MLAN_STATUS_SUCCESS;
	} else {
		PRINTM(MERROR, "cmd53 read error=%d\n", status);
		woal_dump_sdio_reg(handle);
	}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 32)
	sdio_release_host(((struct sdio_mmc_card *)handle->card)->func);
#endif
#ifdef SDIO_MMC_DEBUG
	handle->cmd53r = 2;
#endif
	return ret;
}

开发者ID:acorn-marvell，项目名称:brillo_pxa_kernel，代码行数:49，代码来源:moal_sdio_mmc.c

示例6: if_sdio_disable

static int if_sdio_disable(struct iwm_priv *iwm)
{
	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
	int ret;

	sdio_claim_host(hw->func);
	sdio_writeb(hw->func, 0, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
	if (ret < 0)
		IWM_WARN(iwm, "Couldn't disable INTR: %d\n", ret);

	sdio_release_irq(hw->func);
	sdio_disable_func(hw->func);
	sdio_release_host(hw->func);

	iwm_sdio_rx_free(hw);

	iwm_reset(iwm);

	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO disable\n");

	return 0;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:22，代码来源:sdio.c

示例7: wl12xx_sdio_power_off

static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
{
	int ret;
	struct sdio_func *func = dev_to_sdio_func(glue->dev);
	struct mmc_card *card = func->card;

	sdio_claim_host(func);
	sdio_disable_func(func);
	sdio_release_host(func);

	/* Power off the card manually in case it wasn't powered off above */
	ret = 0;
	mmc_power_save_host(card->host);
	if (ret < 0)
		goto out;

	/* Let runtime PM know the card is powered off */
	pm_runtime_put_sync(&card->dev);

out:
	return ret;
}

开发者ID:Jonathan727，项目名称:linux-2.6.35.3-imx28，代码行数:22，代码来源:sdio.c

示例8: i2400ms_rx_setup

/*
 * Setup SDIO RX
 *
 * Hooks up the IRQ handler and then enables IRQs.
 */
int i2400ms_rx_setup(struct i2400ms *i2400ms)
{
	int result;
	struct sdio_func *func = i2400ms->func;
	struct device *dev = &func->dev;
	struct i2400m *i2400m = &i2400ms->i2400m;

	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);

	init_waitqueue_head(&i2400ms->bm_wfa_wq);
	spin_lock(&i2400m->rx_lock);
	i2400ms->bm_wait_result = -EINPROGRESS;
	/*
	 * Before we are about to enable the RX interrupt, make sure
	 * bm_ack_size is cleared to -EINPROGRESS which indicates
	 * no RX interrupt happened yet or the previous interrupt
	 * has been handled, we are ready to take the new interrupt
	 */
	i2400ms->bm_ack_size = -EINPROGRESS;
	spin_unlock(&i2400m->rx_lock);

	sdio_claim_host(func);
	result = sdio_claim_irq(func, i2400ms_irq);
	if (result < 0) {
		dev_err(dev, "Cannot claim IRQ: %d\n", result);
		goto error_irq_claim;
	}
	result = 0;
	sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result);
	if (result < 0) {
		sdio_release_irq(func);
		dev_err(dev, "Failed to enable interrupts %d\n", result);
	}
error_irq_claim:
	sdio_release_host(func);
	d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
	return result;
}

开发者ID:andi34，项目名称:Dhollmen_Kernel，代码行数:43，代码来源:sdio-rx.c

示例9: wl1271_sdio_power_off

static int wl1271_sdio_power_off(struct wl1271 *wl)
{
	struct sdio_func *func = wl_to_func(wl);
	int ret;

	sdio_disable_func(func);
	sdio_release_host(func);

	/* Power off the card manually, even if runtime PM is enabled. */
	ret = mmc_power_save_host(func->card->host);
	if (ret < 0) {
printk (KERN_ERR "%s:mmc_power_save_host: %d\n", __func__, ret );
		return ret;
	}

	/* If enabled, let runtime PM know the card is powered off */
	if (pm_runtime_enabled(&func->dev))
		ret = pm_runtime_put_sync(&func->dev);

printk (KERN_ERR "%s: %d\n", __func__, ret );

	return ret;
}

开发者ID:sjardine1，项目名称:compat-wireless-2011-08-08，代码行数:23，代码来源:sdio.c

示例10: mtk_sdio_remove

static void
mtk_sdio_remove (
    struct sdio_func *func
    )
{
    //printk(KERN_INFO DRV_NAME"mtk_sdio_remove()\n");

#if CFG_DBG_GPIO_PINS
    //printk(KERN_INFO "[%s] deinit debug gpio \n", __FUNCTION__);
    debug_gpio_deinit();
#endif

    ASSERT(func);
    //printk(KERN_INFO DRV_NAME"pfWlanRemove done\n");
    pfWlanRemove();

    sdio_claim_host(func);
    sdio_disable_func(func);
    //printk(KERN_INFO DRV_NAME"sdio_disable_func() done\n");
    sdio_release_host(func);

    //printk(KERN_INFO DRV_NAME"mtk_sdio_remove() done\n");
}

开发者ID:Dee-UK，项目名称:RK3188_KK_4.4.02_Beta，代码行数:23，代码来源:sdio.c

示例11: sd_f0_read8

u8 sd_f0_read8(PSDIO_DATA psdio, u32 addr, s32 *err)
{
	u8 v;
	struct sdio_func *func;
	bool claim_needed;

_func_enter_;

	func = psdio->func;
	claim_needed = rtw_sdio_claim_host_needed(func);

	if (claim_needed)
		sdio_claim_host(func);
	v = sdio_f0_readb(func, addr, err);
	if (claim_needed)
		sdio_release_host(func);
	if (err && *err)
		DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, *err, addr);

_func_exit_;

	return v;
}

开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:23，代码来源:sdio_ops_linux.c

示例12: sif_set_clock

void sif_set_clock(struct sdio_func *func, int clk)
{
	struct mmc_host *host = NULL;
	struct mmc_card *card = NULL;
	
	card = func->card;
	host = card->host;

	sdio_claim_host(func);

	//currently only set clock
	host->ios.clock = clk * 1000000;

	esp_dbg(ESP_SHOW, "%s clock is %u\n", __func__, host->ios.clock);
	if (host->ios.clock > host->f_max) {
		host->ios.clock = host->f_max;
	}
	host->ops->set_ios(host, &host->ios);

	mdelay(2);

	sdio_release_host(func);
}

开发者ID:Icenowy，项目名称:esp8089，代码行数:23，代码来源:sdio_sif_esp.c

示例13: woal_read_data_sync

/**
 *  @brief This function reads multiple bytes from card memory
 *
 *  @param handle   A Pointer to the moal_handle structure
 *  @param pmbuf	Pointer to mlan_buffer structure
 *  @param port		Port
 *  @param timeout 	Time out value
 *
 *  @return    		MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
 */
mlan_status
woal_read_data_sync(moal_handle * handle, mlan_buffer * pmbuf, t_u32 port,
                    t_u32 timeout)
{
    mlan_status ret = MLAN_STATUS_FAILURE;
    t_u8 *buffer = (t_u8 *) (pmbuf->pbuf + pmbuf->data_offset);
    t_u8 blkmode = (port & MLAN_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE;
    t_u32 blksz = (blkmode == BLOCK_MODE) ? MLAN_SDIO_BLOCK_SIZE : 1;
    t_u32 blkcnt =
        (blkmode ==
         BLOCK_MODE) ? (pmbuf->data_len /
                        MLAN_SDIO_BLOCK_SIZE) : pmbuf->data_len;
    t_u32 ioport = (port & MLAN_SDIO_IO_PORT_MASK);

	sdio_claim_host(((struct sdio_mmc_card *) handle->card)->func);
    if (!sdio_readsb
        (((struct sdio_mmc_card *) handle->card)->func, buffer, ioport,
         blkcnt * blksz))
        ret = MLAN_STATUS_SUCCESS;
	sdio_release_host(((struct sdio_mmc_card *) handle->card)->func);

    return ret;
}

开发者ID:CoreTech-Development，项目名称:buildroot-linux-kernel-m3，代码行数:33，代码来源:moal_sdio_mmc.c

示例14: mtk_sdio_interrupt

static INT32 mtk_sdio_interrupt(MTK_WCN_HIF_SDIO_CLTCTX cltCtx)
{
    P_GLUE_INFO_T prGlueInfo = NULL;
    INT32 ret = 0;

    struct sdio_func* func; 
     
     func = hif_sdio_ctx_to_func_wapper(cltCtx);

     sdio_release_host(func);
     
    prGlueInfo = mtk_wcn_hif_sdio_get_drvdata(cltCtx);

    ASSERT(prGlueInfo);

    if (!prGlueInfo) {
        //printk(KERN_INFO DRV_NAME"No glue info in mtk_sdio_interrupt()\n");
        return (-HIF_SDIO_ERR_FAIL);
    }

    if (prGlueInfo->u4Flag & GLUE_FLAG_HALT) {
        //printk(KERN_INFO DRV_NAME"GLUE_FLAG_HALT skip INT\n");
        ret = mtk_wcn_hif_sdio_writel(cltCtx, MCR_WHLPCR, WHLPCR_INT_EN_CLR);
        return ret;
    }

    ret = mtk_wcn_hif_sdio_writel(cltCtx, MCR_WHLPCR, WHLPCR_INT_EN_CLR);

    set_bit (GLUE_FLAG_INT_BIT, &prGlueInfo->u4Flag);

    /* when we got sdio interrupt, we wake up the tx servie thread*/
    wake_up_interruptible(&prGlueInfo->waitq);
    
    sdio_claim_host(func);
    
    return ret;
}

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:37，代码来源:sdio.c

示例15: hw_get_mac_address

/* get MAC address from device */
void hw_get_mac_address(void *data)
{
	struct net_adapter *adapter = (struct net_adapter *)data;
	struct hw_private_packet	req;
	int				nResult = 0;
	int				retry = 3;
	req.id0 = 'W';
	req.id1 = 'P';
	req.code = HwCodeMacRequest;
	req.value = 0;
	do {
		if (adapter == NULL)
			break;

		sdio_claim_host(adapter->func);
		nResult = sd_send(adapter, (u_char *)&req,
				sizeof(struct hw_private_packet));
		sdio_release_host(adapter->func);

		if (nResult != STATUS_SUCCESS)
			dump_debug("hw_get_mac_address: sd_send fail!!");
		msleep(300);
		retry--;
		/*in case we dont get MAC we need
				to release power lock and probe finsh */
		if (!retry) {
			adapter->download_complete = TRUE;
			wake_up_interruptible(&adapter->download_event);
			msleep(100);

		}
	} while ((!adapter->mac_ready) && (!adapter->halted) && retry);

	adapter->pdata->g_cfg->powerup_done = true ;
	dump_debug("MAC thread exit");
	return;
}

开发者ID:mogchen，项目名称:Homura-Note，代码行数:38，代码来源:hardware.c

示例16: wl12xx_sdio_raw_read

static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,
					     void *buf, size_t len, bool fixed)
{
	int ret;
	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
	struct sdio_func *func = dev_to_sdio_func(glue->dev);

	sdio_claim_host(func);

	if (unlikely(dump)) {
		printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr);
		print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ",
				DUMP_PREFIX_OFFSET, 16, 1,
				buf, len, false);
	}

	if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
		((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
		dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
			addr, ((u8 *)buf)[0]);
	} else {
		if (fixed)
			ret = sdio_readsb(func, buf, addr, len);
		else
			ret = sdio_memcpy_fromio(func, buf, addr, len);

		dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n",
			addr, len);
	}

	sdio_release_host(func);

	if (WARN_ON(ret))
		dev_err(child->parent, "sdio read failed (%d)\n", ret);

	return ret;
}

开发者ID:383530895，项目名称:linux，代码行数:37，代码来源:sdio.c

示例17: wl1271_suspend

static int wl1271_suspend(struct device *dev)
{
	/* Tell MMC/SDIO core it's OK to power down the card
	 * (if it isn't already), but not to remove it completely */
	struct sdio_func *func = dev_to_sdio_func(dev);
	struct wl1271 *wl = sdio_get_drvdata(func);
	mmc_pm_flag_t sdio_flags;
	int ret = 0;

	wl1271_debug(DEBUG_MAC80211, "wl1271 suspend. wow_enabled: %d",
		     wl->wow_enabled);

	/* check whether sdio should keep power */
	if (wl->wow_enabled) {
		sdio_flags = sdio_get_host_pm_caps(func);

		if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
			wl1271_error("can't keep power while host "
				     "is suspended");
			ret = -EINVAL;
			goto out;
		}

		printk("\n\nSetting MMC_PM_KEEP_POWER\n");
		/* keep power while host suspended */
		ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
		if (ret) {
			wl1271_error("error while trying to keep power");
			goto out;
		}

		/* release host */
		sdio_release_host(func);
	}
out:
	return ret;
}

开发者ID:Tof37，项目名称:msm7x27-2.6.32.x-nAa，代码行数:37，代码来源:sdio.c

示例18: sbi_get_int_status

/** 
 *  @brief This function checks the interrupt status and handle it accordingly.
 *  
 *  @param priv    A pointer to bt_private structure
 *  @param ireg    A pointer to variable that keeps returned value
 *  @return 	   BT_STATUS_SUCCESS 
 */
int
sbi_get_int_status(bt_private * priv, u8 * ireg)
{
    int ret = BT_STATUS_SUCCESS;
    u8 sdio_ireg = 0;
    struct sdio_mmc_card *card = priv->bt_dev.card;
    struct hci_dev *hdev = priv->bt_dev.hcidev;

    ENTER();

    *ireg = 0;
    OS_INT_DISABLE;
    sdio_ireg = priv->adapter->sd_ireg;
    priv->adapter->sd_ireg = 0;
    OS_INT_RESTORE;
    sdio_claim_host(card->func);
    PRINTM(INTR, "BT: get_int_status %s: sdio_ireg=0x%x\n", hdev->name,
           sdio_ireg);
    priv->adapter->irq_done = sdio_ireg;
    if (sdio_ireg & DN_LD_HOST_INT_STATUS) {    /* tx_done INT */
        if (priv->bt_dev.tx_dnld_rdy) { /* tx_done already received */
            PRINTM(INFO,
                   "BT: warning: tx_done already received: tx_dnld_rdy=0x%x int status=0x%x\n",
                   priv->bt_dev.tx_dnld_rdy, sdio_ireg);
        } else {
            priv->bt_dev.tx_dnld_rdy = TRUE;
        }
    }
    if (sdio_ireg & UP_LD_HOST_INT_STATUS)
        sd_card_to_host(priv);

    *ireg = sdio_ireg;
    ret = BT_STATUS_SUCCESS;
    sdio_release_host(card->func);
    LEAVE();
    return ret;
}

开发者ID:12019，项目名称:miniature-octo-tribble，代码行数:44，代码来源:bt_sdiommc.c

示例19: sd_f0_read8

u8 sd_f0_read8(struct intf_hdl *pintfhdl,u32 addr, s32 *err)
{
	PADAPTER padapter;
	struct dvobj_priv *psdiodev;
	PSDIO_DATA psdio;
	
	u8 v=0;
	struct sdio_func *func;
	bool claim_needed;

_func_enter_;

	padapter = pintfhdl->padapter;
	psdiodev = pintfhdl->pintf_dev;
	psdio = &psdiodev->intf_data;

	if(padapter->bSurpriseRemoved){
		//DBG_871X(" %s (padapter->bSurpriseRemoved )!!!\n",__FUNCTION__);
		return v;
	}	
	
	func = psdio->func;
	claim_needed = rtw_sdio_claim_host_needed(func);

	if (claim_needed)
		sdio_claim_host(func);
	v = sdio_f0_readb(func, addr, err);
	if (claim_needed)
		sdio_release_host(func);
	if (err && *err)
		DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, *err, addr);

_func_exit_;

	return v;
}

开发者ID:Dee-UK，项目名称:RK3188_KK_4.4.02_Beta，代码行数:36，代码来源:sdio_ops_linux.c

示例20: RecvOnePkt

u8 RecvOnePkt(struct adapter *adapter, u32 size)
{
	struct recv_buf *recvbuf;
	struct dvobj_priv *sddev;
	PSDIO_DATA psdio_data;
	struct sdio_func *func;

	u8 res = false;

	DBG_871X("+%s: size: %d+\n", __func__, size);

	if (!adapter) {
		DBG_871X(KERN_ERR "%s: adapter is NULL!\n", __func__);
		return false;
	}

	sddev = adapter_to_dvobj(adapter);
	psdio_data = &sddev->intf_data;
	func = psdio_data->func;

	if (size) {
		sdio_claim_host(func);
		recvbuf = sd_recv_rxfifo(adapter, size);

		if (recvbuf) {
			/* printk("Completed Recv One Pkt.\n"); */
			sd_rxhandler(adapter, recvbuf);
			res = true;
		} else {
			res = false;
		}
		sdio_release_host(func);
	}
	DBG_871X("-%s-\n", __func__);
	return res;
}

开发者ID:Lyude，项目名称:linux，代码行数:36，代码来源:sdio_ops.c

注：本文中的sdio_release_host函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sdio_set_block_size函数代码示例发布时间：2022-05-30

C++ sdio_register_driver函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17947|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8505|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8410|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9300|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8374|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8357|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7358|2022-11-06

客服电话

电子邮件

C++ sdio_release_host函数代码示例

示例1: mwifiex_read_data_sync

示例2: ssb_sdio_read32

示例3: sdio_free_irq

示例4: sd_cmd52_write

示例5: woal_read_data_sync

示例6: if_sdio_disable

示例7: wl12xx_sdio_power_off

示例8: i2400ms_rx_setup

示例9: wl1271_sdio_power_off

示例10: mtk_sdio_remove

示例11: sd_f0_read8

示例12: sif_set_clock

示例13: woal_read_data_sync

示例14: mtk_sdio_interrupt

示例15: hw_get_mac_address

示例16: wl12xx_sdio_raw_read

示例17: wl1271_suspend

示例18: sbi_get_int_status

示例19: sd_f0_read8

示例20: RecvOnePkt

请发表评论

全部评论

上一篇：

下一篇：

CVE-2021-39019

solegalli/feature-selection-for-machine-

android/android-ktx: A set of Kotlin ext

tianli/matlab_offscreen: Matlab offscree

win7系统重装系统初始设置的操作方法

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053