C++ sendSettings函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sendSettings函数的典型用法代码示例。如果您正苦于以下问题：C++ sendSettings函数的具体用法？C++ sendSettings怎么用？C++ sendSettings使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sendSettings函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sendSettings

void AirspyGui::on_fcPos_currentIndexChanged(int index)
{
	if (index == 0) {
		m_settings.m_fcPos = AirspySettings::FC_POS_INFRA;
		sendSettings();
	} else if (index == 1) {
		m_settings.m_fcPos = AirspySettings::FC_POS_SUPRA;
		sendSettings();
	} else if (index == 2) {
		m_settings.m_fcPos = AirspySettings::FC_POS_CENTER;
		sendSettings();
	}
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:13，代码来源:airspygui.cpp

示例2: QWidget

AirspyGui::AirspyGui(DeviceUISet *deviceUISet, QWidget* parent) :
	QWidget(parent),
	ui(new Ui::AirspyGui),
	m_deviceUISet(deviceUISet),
	m_doApplySettings(true),
	m_forceSettings(true),
	m_settings(),
	m_sampleSource(0),
	m_lastEngineState(DSPDeviceSourceEngine::StNotStarted)
{
    m_sampleSource = (AirspyInput*) m_deviceUISet->m_deviceSourceAPI->getSampleSource();

    ui->setupUi(this);
	ui->centerFrequency->setColorMapper(ColorMapper(ColorMapper::GrayGold));
	updateFrequencyLimits();

	connect(&m_updateTimer, SIGNAL(timeout()), this, SLOT(updateHardware()));
	connect(&m_statusTimer, SIGNAL(timeout()), this, SLOT(updateStatus()));
	m_statusTimer.start(500);

    CRightClickEnabler *startStopRightClickEnabler = new CRightClickEnabler(ui->startStop);
    connect(startStopRightClickEnabler, SIGNAL(rightClick(const QPoint &)), this, SLOT(openDeviceSettingsDialog(const QPoint &)));

	displaySettings();

	m_rates = ((AirspyInput*) m_sampleSource)->getSampleRates();
	displaySampleRates();
    connect(&m_inputMessageQueue, SIGNAL(messageEnqueued()), this, SLOT(handleInputMessages()), Qt::QueuedConnection);
    m_sampleSource->setMessageQueueToGUI(&m_inputMessageQueue);

    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:32，代码来源:airspygui.cpp

示例3: updateTxDelayTooltip

void SDRdaemonSinkGui::on_txDelay_valueChanged(int value)
{
    m_settings.m_txDelay = value / 100.0;
    ui->txDelayText->setText(tr("%1").arg(value));
    updateTxDelayTooltip();
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:7，代码来源:sdrdaemonsinkgui.cpp

示例4: sendSettings

void LimeSDROutputGUI::on_swInterp_currentIndexChanged(int index)
{
    if ((index <0) || (index > 6))
        return;
    m_settings.m_log2SoftInterp = index;
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:7，代码来源:limesdroutputgui.cpp

示例5: sendSettings

void Controller::setProfileID( uint8_t pid ){
  if ( pid == getProfileID() ){
    return;
  }
  EEPROM.write( EEPROM_TEMP_BASE + _cid * EEPROM_CONTROLLER_SETTING_SIZE, pid );
  sendSettings();
}

开发者ID:LuckyOfST，项目名称:heizung，代码行数:7，代码来源:Controller.cpp

示例6: e4kIdxToLNAGain

void OsmoSDRGui::on_e4000LNAGain_valueChanged(int value)
{
	int gain = e4kIdxToLNAGain(value);
	ui->e4000LNAGainDisplay->setText(tr("%1.%2").arg(gain / 10).arg(abs(gain % 10)));
	m_settings.m_lnaGain = gain;
	sendSettings();
}

开发者ID:0x7678，项目名称:rtl-sdrangelove，代码行数:7，代码来源:osmosdrgui.cpp

示例7: displaySettings

void V4LGui::resetToDefaults()
{
    m_generalSettings.resetToDefaults();
    m_settings.resetToDefaults();
    displaySettings();
    sendSettings();
}

开发者ID:zoutepopcorn，项目名称:rtl-sdrangelove，代码行数:7，代码来源:v4lgui.cpp

示例8: qDebug

void LimeSDROutputGUI::on_extClock_clicked()
{
    m_settings.m_extClock = ui->extClock->getExternalClockActive();
    m_settings.m_extClockFreq = ui->extClock->getExternalClockFrequency();
    qDebug("LimeSDROutputGUI::on_extClock_clicked: %u Hz %s", m_settings.m_extClockFreq, m_settings.m_extClock ? "on" : "off");
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:7，代码来源:limesdroutputgui.cpp

示例9: sendSettings

void OsmoSDRGui::on_e4000MixerEnh_currentIndexChanged(int index)
{
	if(index == 0)
		m_settings.m_mixerEnhancement = 0;
	else m_settings.m_mixerEnhancement = index * 20 - 10;
	sendSettings();
}

开发者ID:0x7678，项目名称:rtl-sdrangelove，代码行数:7，代码来源:osmosdrgui.cpp

示例10: displaySettings

void SDRdaemonSourceGui::resetToDefaults()
{
    m_settings.resetToDefaults();
    displaySettings();
    m_forceSettings = true;
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:7，代码来源:sdrdaemonsourcegui.cpp

示例11: sendSettings

void Bladerf1OutputGui::on_interp_currentIndexChanged(int index)
{
	if ((index <0) || (index > 6))
		return;
	m_settings.m_log2Interp = index;
	sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:7，代码来源:bladerf1outputgui.cpp

示例12: QWidget

SDRdaemonSourceGui::SDRdaemonSourceGui(DeviceUISet *deviceUISet, QWidget* parent) :
	QWidget(parent),
	ui(new Ui::SDRdaemonSourceGui),
	m_deviceUISet(deviceUISet),
	m_settings(),
	m_sampleSource(0),
	m_acquisition(false),
	m_streamSampleRate(0),
	m_streamCenterFrequency(0),
	m_lastEngineState(DSPDeviceSourceEngine::StNotStarted),
	m_framesDecodingStatus(0),
	m_bufferLengthInSecs(0.0),
    m_bufferGauge(-50),
	m_nbOriginalBlocks(128),
    m_nbFECBlocks(0),
    m_sampleBits(16), // assume 16 bits to start with
    m_sampleBytes(2),
    m_samplesCount(0),
    m_tickCount(0),
    m_addressEdited(false),
    m_dataPortEdited(false),
	m_countUnrecoverable(0),
	m_countRecovered(0),
    m_doApplySettings(true),
    m_forceSettings(true),
    m_txDelay(0.0)
{
    m_paletteGreenText.setColor(QPalette::WindowText, Qt::green);
    m_paletteWhiteText.setColor(QPalette::WindowText, Qt::white);

	m_startingTimeStampms = 0;
	ui->setupUi(this);

	ui->centerFrequency->setColorMapper(ColorMapper(ColorMapper::GrayGold));
	ui->centerFrequency->setValueRange(7, 0, 9999999U);

    CRightClickEnabler *startStopRightClickEnabler = new CRightClickEnabler(ui->startStop);
    connect(startStopRightClickEnabler, SIGNAL(rightClick(const QPoint &)), this, SLOT(openDeviceSettingsDialog(const QPoint &)));

	displaySettings();

	connect(&m_statusTimer, SIGNAL(timeout()), this, SLOT(updateStatus()));
	m_statusTimer.start(500);
    connect(&m_updateTimer, SIGNAL(timeout()), this, SLOT(updateHardware()));

    m_sampleSource = (SDRdaemonSourceInput*) m_deviceUISet->m_deviceSourceAPI->getSampleSource();

	connect(&m_inputMessageQueue, SIGNAL(messageEnqueued()), this, SLOT(handleInputMessages()), Qt::QueuedConnection);
	m_sampleSource->setMessageQueueToGUI(&m_inputMessageQueue);

    m_networkManager = new QNetworkAccessManager();
    connect(m_networkManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(networkManagerFinished(QNetworkReply*)));

    m_eventsTime.start();
    displayEventCounts();
    displayEventTimer();

    m_forceSettings = true;
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:60，代码来源:sdrdaemonsourcegui.cpp

示例13: if

void Bladerf1OutputGui::on_xb200_currentIndexChanged(int index)
{
	if (index == 1) // bypass
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_BYPASS;
	}
	else if (index == 2) // Auto 1dB
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_MIX;
		m_settings.m_xb200Filter = BLADERF_XB200_AUTO_1DB;
	}
	else if (index == 3) // Auto 3dB
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_MIX;
		m_settings.m_xb200Filter = BLADERF_XB200_AUTO_3DB;
	}
	else if (index == 4) // Custom
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_MIX;
		m_settings.m_xb200Filter = BLADERF_XB200_CUSTOM;
	}
	else if (index == 5) // 50 MHz
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_MIX;
		m_settings.m_xb200Filter = BLADERF_XB200_50M;
	}
	else if (index == 6) // 144 MHz
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_MIX;
		m_settings.m_xb200Filter = BLADERF_XB200_144M;
	}
	else if (index == 7) // 222 MHz
	{
		m_settings.m_xb200 = true;
		m_settings.m_xb200Path = BLADERF_XB200_MIX;
		m_settings.m_xb200Filter = BLADERF_XB200_222M;
	}
	else // no xb200
	{
		m_settings.m_xb200 = false;
	}

	if (m_settings.m_xb200)
	{
		ui->centerFrequency->setValueRange(7, BLADERF_FREQUENCY_MIN_XB200/1000, BLADERF_FREQUENCY_MAX/1000);
	}
	else
	{
		ui->centerFrequency->setValueRange(7, BLADERF_FREQUENCY_MIN/1000, BLADERF_FREQUENCY_MAX/1000);
	}

	sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:59，代码来源:bladerf1outputgui.cpp

示例14: QWidget

SDRdaemonSinkGui::SDRdaemonSinkGui(DeviceUISet *deviceUISet, QWidget* parent) :
	QWidget(parent),
	ui(new Ui::SDRdaemonSinkGui),
	m_deviceUISet(deviceUISet),
	m_settings(),
	m_deviceSampleSink(0),
	m_deviceCenterFrequency(0),
	m_samplesCount(0),
	m_tickCount(0),
	m_nbSinceLastFlowCheck(0),
	m_lastEngineState(DSPDeviceSinkEngine::StNotStarted),
	m_doApplySettings(true),
	m_forceSettings(true)
{
    m_countUnrecoverable = 0;
    m_countRecovered = 0;
    m_lastCountUnrecoverable = 0;
    m_lastCountRecovered = 0;
    m_lastSampleCount = 0;
    m_resetCounts = true;

    m_paletteGreenText.setColor(QPalette::WindowText, Qt::green);
    m_paletteRedText.setColor(QPalette::WindowText, Qt::red);
    m_paletteWhiteText.setColor(QPalette::WindowText, Qt::white);

    ui->setupUi(this);

	ui->centerFrequency->setColorMapper(ColorMapper(ColorMapper::GrayGold));
	ui->centerFrequency->setValueRange(7, 0, pow(10,7));

    ui->sampleRate->setColorMapper(ColorMapper(ColorMapper::GrayGreenYellow));
    ui->sampleRate->setValueRange(7, 32000U, 9000000U);

    ui->apiAddressLabel->setStyleSheet("QLabel { background:rgb(79,79,79); }");

	connect(&(m_deviceUISet->m_deviceSinkAPI->getMasterTimer()), SIGNAL(timeout()), this, SLOT(tick()));
	connect(&m_updateTimer, SIGNAL(timeout()), this, SLOT(updateHardware()));
	connect(&m_statusTimer, SIGNAL(timeout()), this, SLOT(updateStatus()));
	m_statusTimer.start(500);

	m_deviceSampleSink = (SDRdaemonSinkOutput*) m_deviceUISet->m_deviceSinkAPI->getSampleSink();

	connect(&m_inputMessageQueue, SIGNAL(messageEnqueued()), this, SLOT(handleInputMessages()), Qt::QueuedConnection);

	m_networkManager = new QNetworkAccessManager();
	connect(m_networkManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(networkManagerFinished(QNetworkReply*)));

	m_deviceUISet->getSpectrum()->setCenterFrequency(m_deviceCenterFrequency);

    m_time.start();
    displayEventCounts();
    displayEventTimer();

    CRightClickEnabler *startStopRightClickEnabler = new CRightClickEnabler(ui->startStop);
    connect(startStopRightClickEnabler, SIGNAL(rightClick(const QPoint &)), this, SLOT(openDeviceSettingsDialog(const QPoint &)));

    displaySettings();
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:59，代码来源:sdrdaemonsinkgui.cpp

示例15: sendSettings

void GNURadioGui::on_cboBandwidth_currentIndexChanged(int index)
{
	if ( index < 0 || (uint)index >= m_bandwidths.size() )
		return;

	m_settings.m_bandwidth = m_bandwidths[index];
	sendSettings();
}

开发者ID:0x7678，项目名称:rtl-sdrangelove，代码行数:8，代码来源:gnuradiogui.cpp

示例16: blockApplySettings

void SDRdaemonSinkGui::resetToDefaults()
{
    blockApplySettings(true);
	m_settings.resetToDefaults();
	displaySettings();
	blockApplySettings(false);
	sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:8，代码来源:sdrdaemonsinkgui.cpp

示例17: sendSettings

void RTLSDRGui::on_samplerate_valueChanged(int value)
{
	int Rates[] = {288, 1024, 1536, 1152, 2048, 2500 };
	int newrate = Rates[value];
	ui->samplerateText->setText(tr("%1k").arg(newrate));
	m_settings.m_samplerate = newrate * 1000;
	sendSettings();
}

开发者ID:0x7678，项目名称:rtl-sdrangelove，代码行数:8，代码来源:rtlsdrgui.cpp

示例18: sendSettings

void V4LGui::on_gain_valueChanged(int value)
{
    if(value > (int)m_gains.size())
        return;
    int gain = m_gains[value];
    ui->gainText->setText(tr("%1.%2").arg(gain / 10).arg(abs(gain % 10)));
    m_settings.m_gain = gain;
    sendSettings();
}

开发者ID:zoutepopcorn，项目名称:rtl-sdrangelove，代码行数:9，代码来源:v4lgui.cpp

示例19: sendSettings

void BladerfGui::on_vga1_valueChanged(int value)
{
	if ((value < BLADERF_RXVGA1_GAIN_MIN) || (value > BLADERF_RXVGA1_GAIN_MAX))
		return;

	ui->vga1Text->setText(tr("%1dB").arg(value));
	m_settings.m_vga1 = value;
	sendSettings();
}

开发者ID:f4exb，项目名称:sdrangel，代码行数:9，代码来源:bladerfgui.cpp

示例20: qDebug

void AirspyGui::on_transverter_clicked()
{
    m_settings.m_transverterMode = ui->transverter->getDeltaFrequencyAcive();
    m_settings.m_transverterDeltaFrequency = ui->transverter->getDeltaFrequency();
    qDebug("AirspyGui::on_transverter_clicked: %lld Hz %s", m_settings.m_transverterDeltaFrequency, m_settings.m_transverterMode ? "on" : "off");
    updateFrequencyLimits();
    m_settings.m_centerFrequency = ui->centerFrequency->getValueNew()*1000;
    sendSettings();
}

开发者ID:sigysmund，项目名称:sdrangel，代码行数:9，代码来源:airspygui.cpp

注：本文中的sendSettings函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sendSignal函数代码示例发布时间：2022-05-30

C++ sendResult函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17943|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8505|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8409|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9299|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8373|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8356|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7358|2022-11-06

客服电话

电子邮件

C++ sendSettings函数代码示例

示例1: sendSettings

示例2: QWidget

示例3: updateTxDelayTooltip

示例4: sendSettings

示例5: sendSettings

示例6: e4kIdxToLNAGain

示例7: displaySettings

示例8: qDebug

示例9: sendSettings

示例10: displaySettings

示例11: sendSettings

示例12: QWidget

示例13: if

示例14: QWidget

示例15: sendSettings

示例16: blockApplySettings

示例17: sendSettings

示例18: sendSettings

示例19: sendSettings

示例20: qDebug

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

断牙刷新位置时间（断牙属性及刷新位置介绍

MATLAB命令大全

更的笔顺,体会更的笔画,理会更的部首

ecki/net-tools: Linux base networking to

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053