Golang config.New函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/syncthing/syncthing/lib/config.New函数的典型用法代码示例。如果您正苦于以下问题：Golang New函数的具体用法？Golang New怎么用？Golang New使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了New函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: defaultConfig

func defaultConfig(myName string) config.Configuration {
	newCfg := config.New(myID)
	newCfg.Folders = []config.FolderConfiguration{
		{
			ID:              "default",
			RawPath:         locations[locDefFolder],
			RescanIntervalS: 60,
			MinDiskFreePct:  1,
			Devices:         []config.FolderDeviceConfiguration{{DeviceID: myID}},
		},
	}
	newCfg.Devices = []config.DeviceConfiguration{
		{
			DeviceID:  myID,
			Addresses: []string{"dynamic"},
			Name:      myName,
		},
	}

	port, err := getFreePort("127.0.0.1", 8384)
	if err != nil {
		l.Fatalln("get free port (GUI):", err)
	}
	newCfg.GUI.Address = fmt.Sprintf("127.0.0.1:%d", port)

	port, err = getFreePort("0.0.0.0", 22000)
	if err != nil {
		l.Fatalln("get free port (BEP):", err)
	}
	newCfg.Options.ListenAddress = []string{fmt.Sprintf("tcp://0.0.0.0:%d", port)}
	return newCfg
}

开发者ID:JBTech，项目名称:syncthing，代码行数:32，代码来源:main.go

示例2: defaultConfig

func defaultConfig(myName string) config.Configuration {
	defaultFolder := config.NewFolderConfiguration("default", locations[locDefFolder])
	defaultFolder.RescanIntervalS = 60
	defaultFolder.MinDiskFreePct = 1
	defaultFolder.Devices = []config.FolderDeviceConfiguration{{DeviceID: myID}}
	defaultFolder.AutoNormalize = true
	defaultFolder.MaxConflicts = -1

	thisDevice := config.NewDeviceConfiguration(myID, myName)
	thisDevice.Addresses = []string{"dynamic"}

	newCfg := config.New(myID)
	newCfg.Folders = []config.FolderConfiguration{defaultFolder}
	newCfg.Devices = []config.DeviceConfiguration{thisDevice}

	port, err := getFreePort("127.0.0.1", 8384)
	if err != nil {
		l.Fatalln("get free port (GUI):", err)
	}
	newCfg.GUI.RawAddress = fmt.Sprintf("127.0.0.1:%d", port)

	port, err = getFreePort("0.0.0.0", 22000)
	if err != nil {
		l.Fatalln("get free port (BEP):", err)
	}
	newCfg.Options.ListenAddress = []string{fmt.Sprintf("tcp://0.0.0.0:%d", port)}
	return newCfg
}

开发者ID:KetanSingh11，项目名称:syncthing，代码行数:28，代码来源:main.go

示例3: TestDeviceRename

func TestDeviceRename(t *testing.T) {
	ccm := protocol.ClusterConfigMessage{
		ClientName:    "syncthing",
		ClientVersion: "v0.9.4",
	}

	defer os.Remove("tmpconfig.xml")

	rawCfg := config.New(device1)
	rawCfg.Devices = []config.DeviceConfiguration{
		{
			DeviceID: device1,
		},
	}
	cfg := config.Wrap("tmpconfig.xml", rawCfg)

	db, _ := leveldb.Open(storage.NewMemStorage(), nil)
	m := NewModel(cfg, protocol.LocalDeviceID, "device", "syncthing", "dev", db)
	m.ServeBackground()
	if cfg.Devices()[device1].Name != "" {
		t.Errorf("Device already has a name")
	}

	m.ClusterConfig(device1, ccm)
	if cfg.Devices()[device1].Name != "" {
		t.Errorf("Device already has a name")
	}

	ccm.Options = []protocol.Option{
		{
			Key:   "name",
			Value: "tester",
		},
	}
	m.ClusterConfig(device1, ccm)
	if cfg.Devices()[device1].Name != "tester" {
		t.Errorf("Device did not get a name")
	}

	ccm.Options[0].Value = "tester2"
	m.ClusterConfig(device1, ccm)
	if cfg.Devices()[device1].Name != "tester" {
		t.Errorf("Device name got overwritten")
	}

	cfgw, err := config.Load("tmpconfig.xml", protocol.LocalDeviceID)
	if err != nil {
		t.Error(err)
		return
	}
	if cfgw.Devices()[device1].Name != "tester" {
		t.Errorf("Device name not saved in config")
	}
}

开发者ID:kristallizer，项目名称:syncthing，代码行数:54，代码来源:model_test.go

示例4: AsStCfg

func (w *Wrapper) AsStCfg(myID protocol.DeviceID) *stconfig.Wrapper {
	cfg := stconfig.New(myID)

	cfg.Folders = make([]stconfig.FolderConfiguration, len(w.Raw().Folders))
	for i, fldr := range w.Raw().Folders {
		cfg.Folders[i].ID = fldr.ID
		cfg.Folders[i].Devices = make([]stconfig.FolderDeviceConfiguration, len(fldr.Devices))
		copy(cfg.Folders[i].Devices, fldr.Devices)
	}

	cfg.Devices = w.Raw().Devices
	cfg.Options.ListenAddress = w.Raw().Options.ListenAddress

	return stconfig.Wrap("/shouldnotexist", cfg)
}

开发者ID:jk-todo，项目名称:syncthing-fuse，代码行数:15，代码来源:converter.go

示例5: defaultConfig

func defaultConfig(myName string) config.Configuration {
	var defaultFolder config.FolderConfiguration

	if !noDefaultFolder {
		l.Infoln("Default folder created and/or linked to new config")
		folderID := rand.String(5) + "-" + rand.String(5)
		defaultFolder = config.NewFolderConfiguration(folderID, locations[locDefFolder])
		defaultFolder.Label = "Default Folder (" + folderID + ")"
		defaultFolder.RescanIntervalS = 60
		defaultFolder.MinDiskFreePct = 1
		defaultFolder.Devices = []config.FolderDeviceConfiguration{{DeviceID: myID}}
		defaultFolder.AutoNormalize = true
		defaultFolder.MaxConflicts = -1
	} else {
		l.Infoln("We will skip creation of a default folder on first start since the proper envvar is set")
	}

	thisDevice := config.NewDeviceConfiguration(myID, myName)
	thisDevice.Addresses = []string{"dynamic"}

	newCfg := config.New(myID)
	if !noDefaultFolder {
		newCfg.Folders = []config.FolderConfiguration{defaultFolder}
	}
	newCfg.Devices = []config.DeviceConfiguration{thisDevice}

	port, err := getFreePort("127.0.0.1", 8384)
	if err != nil {
		l.Fatalln("get free port (GUI):", err)
	}
	newCfg.GUI.RawAddress = fmt.Sprintf("127.0.0.1:%d", port)

	port, err = getFreePort("0.0.0.0", 22000)
	if err != nil {
		l.Fatalln("get free port (BEP):", err)
	}
	if port == 22000 {
		newCfg.Options.ListenAddresses = []string{"default"}
	} else {
		newCfg.Options.ListenAddresses = []string{
			fmt.Sprintf("tcp://%s", net.JoinHostPort("0.0.0.0", strconv.Itoa(port))),
			"dynamic+https://relays.syncthing.net/endpoint",
		}
	}

	return newCfg
}

开发者ID:carriercomm，项目名称:syncthing，代码行数:47，代码来源:main.go

示例6: AsStCfg

func (w *Wrapper) AsStCfg(myID protocol.DeviceID) *stconfig.Wrapper {
	cfg := stconfig.New(myID)

	cfg.Folders = make([]stconfig.FolderConfiguration, len(w.Raw().Folders))
	for i, fldr := range w.Raw().Folders {
		cfg.Folders[i].ID = fldr.ID
		cfg.Folders[i].Devices = make([]stconfig.FolderDeviceConfiguration, len(fldr.Devices))
		copy(cfg.Folders[i].Devices, fldr.Devices)
	}

	cfg.Devices = w.Raw().Devices
	cfg.Options.ListenAddresses = w.Raw().Options.ListenAddress
	cfg.Options.LocalAnnEnabled = w.Raw().Options.LocalAnnounceEnabled
	cfg.Options.LocalAnnPort = w.Raw().Options.LocalAnnouncePort
	cfg.Options.LocalAnnMCAddr = w.Raw().Options.LocalAnnounceMCAddr
	cfg.Options.GlobalAnnEnabled = w.Raw().Options.GlobalAnnounceEnabled
	cfg.Options.GlobalAnnServers = w.Raw().Options.GlobalAnnounceServers
	cfg.Options.RelaysEnabled = w.Raw().Options.RelaysEnabled
	cfg.Options.RelayReconnectIntervalM = w.Raw().Options.RelayReconnectIntervalM

	return stconfig.Wrap("/shouldnotexist", cfg)
}

开发者ID:burkemw3，项目名称:syncthingfuse，代码行数:22，代码来源:converter.go

示例7: defaultConfig

func defaultConfig(myName string) config.Configuration {
	var defaultFolder config.FolderConfiguration

	if !noDefaultFolder {
		l.Infoln("Default folder created and/or linked to new config")

		defaultFolder = config.NewFolderConfiguration("default", locations[locDefFolder])
		defaultFolder.RescanIntervalS = 60
		defaultFolder.MinDiskFreePct = 1
		defaultFolder.Devices = []config.FolderDeviceConfiguration{{DeviceID: myID}}
		defaultFolder.AutoNormalize = true
		defaultFolder.MaxConflicts = -1
	} else {
		l.Infoln("We will skip creation of a default folder on first start since the proper envvar is set")
	}

	thisDevice := config.NewDeviceConfiguration(myID, myName)
	thisDevice.Addresses = []string{"dynamic"}

	newCfg := config.New(myID)
	if !noDefaultFolder {
		newCfg.Folders = []config.FolderConfiguration{defaultFolder}
	}
	newCfg.Devices = []config.DeviceConfiguration{thisDevice}

	port, err := getFreePort("127.0.0.1", 8384)
	if err != nil {
		l.Fatalln("get free port (GUI):", err)
	}
	newCfg.GUI.RawAddress = fmt.Sprintf("127.0.0.1:%d", port)

	port, err = getFreePort("0.0.0.0", 22000)
	if err != nil {
		l.Fatalln("get free port (BEP):", err)
	}
	newCfg.Options.ListenAddress = []string{fmt.Sprintf("tcp://0.0.0.0:%d", port)}
	return newCfg
}

开发者ID:18pineda，项目名称:syncthing，代码行数:38，代码来源:main.go

示例8: main

func main() {
	log.SetFlags(log.Lshortfile | log.LstdFlags)

	var dir, extAddress, proto string

	flag.StringVar(&listen, "listen", ":22067", "Protocol listen address")
	flag.StringVar(&dir, "keys", ".", "Directory where cert.pem and key.pem is stored")
	flag.DurationVar(&networkTimeout, "network-timeout", networkTimeout, "Timeout for network operations between the client and the relay.\n\tIf no data is received between the client and the relay in this period of time, the connection is terminated.\n\tFurthermore, if no data is sent between either clients being relayed within this period of time, the session is also terminated.")
	flag.DurationVar(&pingInterval, "ping-interval", pingInterval, "How often pings are sent")
	flag.DurationVar(&messageTimeout, "message-timeout", messageTimeout, "Maximum amount of time we wait for relevant messages to arrive")
	flag.IntVar(&sessionLimitBps, "per-session-rate", sessionLimitBps, "Per session rate limit, in bytes/s")
	flag.IntVar(&globalLimitBps, "global-rate", globalLimitBps, "Global rate limit, in bytes/s")
	flag.BoolVar(&debug, "debug", debug, "Enable debug output")
	flag.StringVar(&statusAddr, "status-srv", ":22070", "Listen address for status service (blank to disable)")
	flag.StringVar(&poolAddrs, "pools", defaultPoolAddrs, "Comma separated list of relay pool addresses to join")
	flag.StringVar(&providedBy, "provided-by", "", "An optional description about who provides the relay")
	flag.StringVar(&extAddress, "ext-address", "", "An optional address to advertise as being available on.\n\tAllows listening on an unprivileged port with port forwarding from e.g. 443, and be connected to on port 443.")
	flag.StringVar(&proto, "protocol", "tcp", "Protocol used for listening. 'tcp' for IPv4 and IPv6, 'tcp4' for IPv4, 'tcp6' for IPv6")
	flag.BoolVar(&natEnabled, "nat", false, "Use UPnP/NAT-PMP to acquire external port mapping")
	flag.IntVar(&natLease, "nat-lease", 60, "NAT lease length in minutes")
	flag.IntVar(&natRenewal, "nat-renewal", 30, "NAT renewal frequency in minutes")
	flag.IntVar(&natTimeout, "nat-timeout", 10, "NAT discovery timeout in seconds")
	flag.Parse()

	if extAddress == "" {
		extAddress = listen
	}

	if len(providedBy) > 30 {
		log.Fatal("Provided-by cannot be longer than 30 characters")
	}

	addr, err := net.ResolveTCPAddr(proto, extAddress)
	if err != nil {
		log.Fatal(err)
	}

	laddr, err := net.ResolveTCPAddr(proto, listen)
	if err != nil {
		log.Fatal(err)
	}
	if laddr.IP != nil && !laddr.IP.IsUnspecified() {
		laddr.Port = 0
		transport, ok := http.DefaultTransport.(*http.Transport)
		if ok {
			transport.Dial = (&net.Dialer{
				Timeout:   30 * time.Second,
				LocalAddr: laddr,
			}).Dial
		}
	}

	log.Println(LongVersion)

	maxDescriptors, err := osutil.MaximizeOpenFileLimit()
	if maxDescriptors > 0 {
		// Assume that 20% of FD's are leaked/unaccounted for.
		descriptorLimit = int64(maxDescriptors*80) / 100
		log.Println("Connection limit", descriptorLimit)

		go monitorLimits()
	} else if err != nil && runtime.GOOS != "windows" {
		log.Println("Assuming no connection limit, due to error retrieving rlimits:", err)
	}

	sessionAddress = addr.IP[:]
	sessionPort = uint16(addr.Port)

	certFile, keyFile := filepath.Join(dir, "cert.pem"), filepath.Join(dir, "key.pem")
	cert, err := tls.LoadX509KeyPair(certFile, keyFile)
	if err != nil {
		log.Println("Failed to load keypair. Generating one, this might take a while...")
		cert, err = tlsutil.NewCertificate(certFile, keyFile, "strelaysrv", 3072)
		if err != nil {
			log.Fatalln("Failed to generate X509 key pair:", err)
		}
	}

	tlsCfg := &tls.Config{
		Certificates:           []tls.Certificate{cert},
		NextProtos:             []string{protocol.ProtocolName},
		ClientAuth:             tls.RequestClientCert,
		SessionTicketsDisabled: true,
		InsecureSkipVerify:     true,
		MinVersion:             tls.VersionTLS12,
		CipherSuites: []uint16{
			tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
			tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,
			tls.TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
			tls.TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
			tls.TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
			tls.TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
		},
	}

	id := syncthingprotocol.NewDeviceID(cert.Certificate[0])
	if debug {
		log.Println("ID:", id)
	}

//.........这里部分代码省略.........

开发者ID:nrm21，项目名称:syncthing，代码行数:101，代码来源:main.go

示例9: TestClusterConfig

func TestClusterConfig(t *testing.T) {
	cfg := config.New(device1)
	cfg.Devices = []config.DeviceConfiguration{
		{
			DeviceID:   device1,
			Introducer: true,
		},
		{
			DeviceID: device2,
		},
	}
	cfg.Folders = []config.FolderConfiguration{
		{
			ID: "folder1",
			Devices: []config.FolderDeviceConfiguration{
				{DeviceID: device1},
				{DeviceID: device2},
			},
		},
		{
			ID: "folder2",
			Devices: []config.FolderDeviceConfiguration{
				{DeviceID: device1},
				{DeviceID: device2},
			},
		},
	}

	db, _ := leveldb.Open(storage.NewMemStorage(), nil)

	m := NewModel(config.Wrap("/tmp/test", cfg), protocol.LocalDeviceID, "device", "syncthing", "dev", db, nil)
	m.AddFolder(cfg.Folders[0])
	m.AddFolder(cfg.Folders[1])
	m.ServeBackground()

	cm := m.clusterConfig(device2)

	if l := len(cm.Folders); l != 2 {
		t.Fatalf("Incorrect number of folders %d != 2", l)
	}

	r := cm.Folders[0]
	if r.ID != "folder1" {
		t.Errorf("Incorrect folder %q != folder1", r.ID)
	}
	if l := len(r.Devices); l != 2 {
		t.Errorf("Incorrect number of devices %d != 2", l)
	}
	if id := r.Devices[0].ID; bytes.Compare(id, device1[:]) != 0 {
		t.Errorf("Incorrect device ID %x != %x", id, device1)
	}
	if r.Devices[0].Flags&protocol.FlagIntroducer == 0 {
		t.Error("Device1 should be flagged as Introducer")
	}
	if id := r.Devices[1].ID; bytes.Compare(id, device2[:]) != 0 {
		t.Errorf("Incorrect device ID %x != %x", id, device2)
	}
	if r.Devices[1].Flags&protocol.FlagIntroducer != 0 {
		t.Error("Device2 should not be flagged as Introducer")
	}

	r = cm.Folders[1]
	if r.ID != "folder2" {
		t.Errorf("Incorrect folder %q != folder2", r.ID)
	}
	if l := len(r.Devices); l != 2 {
		t.Errorf("Incorrect number of devices %d != 2", l)
	}
	if id := r.Devices[0].ID; bytes.Compare(id, device1[:]) != 0 {
		t.Errorf("Incorrect device ID %x != %x", id, device1)
	}
	if r.Devices[0].Flags&protocol.FlagIntroducer == 0 {
		t.Error("Device1 should be flagged as Introducer")
	}
	if id := r.Devices[1].ID; bytes.Compare(id, device2[:]) != 0 {
		t.Errorf("Incorrect device ID %x != %x", id, device2)
	}
	if r.Devices[1].Flags&protocol.FlagIntroducer != 0 {
		t.Error("Device2 should not be flagged as Introducer")
	}
}

开发者ID:vhuarui，项目名称:syncthing，代码行数:81，代码来源:model_test.go

示例10: TestDeviceRename

func TestDeviceRename(t *testing.T) {
	ccm := protocol.ClusterConfigMessage{
		ClientName:    "syncthing",
		ClientVersion: "v0.9.4",
	}

	defer os.Remove("tmpconfig.xml")

	rawCfg := config.New(device1)
	rawCfg.Devices = []config.DeviceConfiguration{
		{
			DeviceID: device1,
		},
	}
	cfg := config.Wrap("tmpconfig.xml", rawCfg)

	db, _ := leveldb.Open(storage.NewMemStorage(), nil)
	m := NewModel(cfg, protocol.LocalDeviceID, "device", "syncthing", "dev", db, nil)

	fc := FakeConnection{
		id:          device1,
		requestData: []byte("some data to return"),
	}

	m.AddConnection(Connection{
		&net.TCPConn{},
		fc,
		ConnectionTypeDirectAccept,
	})

	m.ServeBackground()
	if cfg.Devices()[device1].Name != "" {
		t.Errorf("Device already has a name")
	}

	m.ClusterConfig(device1, ccm)
	if cfg.Devices()[device1].Name != "" {
		t.Errorf("Device already has a name")
	}

	ccm.DeviceName = "tester"
	m.ClusterConfig(device1, ccm)
	if cfg.Devices()[device1].Name != "tester" {
		t.Errorf("Device did not get a name")
	}

	ccm.DeviceName = "tester2"
	m.ClusterConfig(device1, ccm)
	if cfg.Devices()[device1].Name != "tester" {
		t.Errorf("Device name got overwritten")
	}

	cfgw, err := config.Load("tmpconfig.xml", protocol.LocalDeviceID)
	if err != nil {
		t.Error(err)
		return
	}
	if cfgw.Devices()[device1].Name != "tester" {
		t.Errorf("Device name not saved in config")
	}
}

开发者ID:vhuarui，项目名称:syncthing，代码行数:61，代码来源:model_test.go

示例11: TestDeviceRename

func TestDeviceRename(t *testing.T) {
	hello := protocol.HelloMessage{
		ClientName:    "syncthing",
		ClientVersion: "v0.9.4",
	}
	defer os.Remove("tmpconfig.xml")

	rawCfg := config.New(device1)
	rawCfg.Devices = []config.DeviceConfiguration{
		{
			DeviceID: device1,
		},
	}
	cfg := config.Wrap("tmpconfig.xml", rawCfg)

	db := db.OpenMemory()
	m := NewModel(cfg, protocol.LocalDeviceID, "device", "syncthing", "dev", db, nil)

	if cfg.Devices()[device1].Name != "" {
		t.Errorf("Device already has a name")
	}

	conn := Connection{
		&net.TCPConn{},
		&FakeConnection{
			id:          device1,
			requestData: []byte("some data to return"),
		},
		ConnectionTypeDirectAccept,
	}

	m.AddConnection(conn, hello)

	m.ServeBackground()

	if cfg.Devices()[device1].Name != "" {
		t.Errorf("Device already has a name")
	}

	m.Close(device1, protocol.ErrTimeout)
	hello.DeviceName = "tester"
	m.AddConnection(conn, hello)

	if cfg.Devices()[device1].Name != "tester" {
		t.Errorf("Device did not get a name")
	}

	m.Close(device1, protocol.ErrTimeout)
	hello.DeviceName = "tester2"
	m.AddConnection(conn, hello)

	if cfg.Devices()[device1].Name != "tester" {
		t.Errorf("Device name got overwritten")
	}

	cfgw, err := config.Load("tmpconfig.xml", protocol.LocalDeviceID)
	if err != nil {
		t.Error(err)
		return
	}
	if cfgw.Devices()[device1].Name != "tester" {
		t.Errorf("Device name not saved in config")
	}

	m.Close(device1, protocol.ErrTimeout)

	opts := cfg.Options()
	opts.OverwriteNames = true
	cfg.SetOptions(opts)

	hello.DeviceName = "tester2"
	m.AddConnection(conn, hello)

	if cfg.Devices()[device1].Name != "tester2" {
		t.Errorf("Device name not overwritten")
	}
}

开发者ID:yanghongkjxy，项目名称:syncthing，代码行数:77，代码来源:model_test.go

示例12: TestClusterConfig

func TestClusterConfig(t *testing.T) {
	cfg := config.New(device1)
	cfg.Devices = []config.DeviceConfiguration{
		{
			DeviceID:   device1,
			Introducer: true,
		},
		{
			DeviceID: device2,
		},
	}
	cfg.Folders = []config.FolderConfiguration{
		{
			ID: "folder1",
			Devices: []config.FolderDeviceConfiguration{
				{DeviceID: device1},
				{DeviceID: device2},
			},
		},
		{
			ID: "folder2",
			Devices: []config.FolderDeviceConfiguration{
				{DeviceID: device1},
				{DeviceID: device2},
			},
		},
	}

	db := db.OpenMemory()

	m := NewModel(config.Wrap("/tmp/test", cfg), protocol.LocalDeviceID, "device", "syncthing", "dev", db, nil)
	m.AddFolder(cfg.Folders[0])
	m.AddFolder(cfg.Folders[1])
	m.ServeBackground()
	defer m.Stop()

	cm := m.generateClusterConfig(device2)

	if l := len(cm.Folders); l != 2 {
		t.Fatalf("Incorrect number of folders %d != 2", l)
	}

	r := cm.Folders[0]
	if r.ID != "folder1" {
		t.Errorf("Incorrect folder %q != folder1", r.ID)
	}
	if l := len(r.Devices); l != 2 {
		t.Errorf("Incorrect number of devices %d != 2", l)
	}
	if id := r.Devices[0].ID; id != device1 {
		t.Errorf("Incorrect device ID %x != %x", id, device1)
	}
	if !r.Devices[0].Introducer {
		t.Error("Device1 should be flagged as Introducer")
	}
	if id := r.Devices[1].ID; id != device2 {
		t.Errorf("Incorrect device ID %x != %x", id, device2)
	}
	if r.Devices[1].Introducer {
		t.Error("Device2 should not be flagged as Introducer")
	}

	r = cm.Folders[1]
	if r.ID != "folder2" {
		t.Errorf("Incorrect folder %q != folder2", r.ID)
	}
	if l := len(r.Devices); l != 2 {
		t.Errorf("Incorrect number of devices %d != 2", l)
	}
	if id := r.Devices[0].ID; id != device1 {
		t.Errorf("Incorrect device ID %x != %x", id, device1)
	}
	if !r.Devices[0].Introducer {
		t.Error("Device1 should be flagged as Introducer")
	}
	if id := r.Devices[1].ID; id != device2 {
		t.Errorf("Incorrect device ID %x != %x", id, device2)
	}
	if r.Devices[1].Introducer {
		t.Error("Device2 should not be flagged as Introducer")
	}
}

开发者ID:brgmnn，项目名称:syncthing，代码行数:82，代码来源:model_test.go

注：本文中的github.com/syncthing/syncthing/lib/config.New函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。