Golang validation.ValidateNodeConfig函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/openshift/origin/pkg/cmd/server/api/validation.ValidateNodeConfig函数的典型用法代码示例。如果您正苦于以下问题：Golang ValidateNodeConfig函数的具体用法？Golang ValidateNodeConfig怎么用？Golang ValidateNodeConfig使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ValidateNodeConfig函数的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: Check

func (d NodeConfigCheck) Check() types.DiagnosticResult {
	r := types.NewDiagnosticResult(NodeConfigCheckName)
	r.Debug("DH1001", fmt.Sprintf("Looking for node config file at '%s'", d.NodeConfigFile))
	nodeConfig, err := configapilatest.ReadAndResolveNodeConfig(d.NodeConfigFile)
	if err != nil {
		r.Error("DH1002", err, fmt.Sprintf("Could not read node config file '%s':\n(%T) %[2]v", d.NodeConfigFile, err))
		return r
	}

	r.Info("DH1003", fmt.Sprintf("Found a node config file: %[1]s", d.NodeConfigFile))

	results := configvalidation.ValidateNodeConfig(nodeConfig, nil)
	if len(results.Errors) > 0 {
		errText := fmt.Sprintf("Validation of node config file '%s' failed:\n", d.NodeConfigFile)
		for _, err := range results.Errors {
			errText += fmt.Sprintf("%v\n", err)
		}
		r.Error("DH1004", nil, errText)
	}
	if len(results.Warnings) > 0 {
		warnText := fmt.Sprintf("Validation of node config file '%s' warned:\n", d.NodeConfigFile)
		for _, warn := range results.Warnings {
			warnText += fmt.Sprintf("%v\n", warn)
		}
		r.Warn("DH1005", nil, warnText)
	}
	return r
}

开发者ID:asiainfoLDP，项目名称:datafactory，代码行数:28，代码来源:check_node_config.go

示例2: Run

// Run runs the node config validation and returns the result of the validation as a boolean as well as any errors
// that occurred trying to validate the file
func (o *ValidateNodeConfigOptions) Run() (ok bool, err error) {
	nodeConfig, err := configapilatest.ReadAndResolveNodeConfig(o.NodeConfigFile)
	if err != nil {
		return true, err
	}

	results := validation.ValidateNodeConfig(nodeConfig, nil)
	writer := tabwriter.NewWriter(o.Out, minColumnWidth, tabWidth, padding, padchar, flags)
	err = prettyPrintValidationResults(results, writer)
	if err != nil {
		return len(results.Errors) == 0, fmt.Errorf("could not print results: %v", err)
	}
	writer.Flush()
	return len(results.Errors) == 0, nil
}

开发者ID:erinboyd，项目名称:origin，代码行数:17，代码来源:node.go

示例3: Check

func (d NodeConfigCheck) Check() types.DiagnosticResult {
	r := types.NewDiagnosticResult(NodeConfigCheckName)
	r.Debug("DH1001", fmt.Sprintf("Looking for node config file at '%s'", d.NodeConfigFile))
	nodeConfig, err := configapilatest.ReadAndResolveNodeConfig(d.NodeConfigFile)
	if err != nil {
		r.Error("DH1002", err, fmt.Sprintf("Could not read node config file '%s':\n(%T) %[2]v", d.NodeConfigFile, err))
		return r
	}

	r.Info("DH1003", fmt.Sprintf("Found a node config file: %[1]s", d.NodeConfigFile))

	for _, err := range configvalidation.ValidateNodeConfig(nodeConfig) {
		r.Error("DH1004", err, fmt.Sprintf("Validation of node config file '%s' failed:\n(%T) %[2]v", d.NodeConfigFile, err))
	}
	return r
}

开发者ID:nitintutlani，项目名称:origin，代码行数:16，代码来源:check_node_config.go

示例4: RunNode

// RunNode takes the options and:
// 1.  Creates certs if needed
// 2.  Reads fully specified node config OR builds a fully specified node config from the args
// 3.  Writes the fully specified node config and exits if needed
// 4.  Starts the node based on the fully specified config
func (o NodeOptions) RunNode() error {
	if !o.IsRunFromConfig() || o.IsWriteConfigOnly() {
		glog.V(2).Infof("Generating node configuration")
		if err := o.CreateNodeConfig(); err != nil {
			return err
		}
	}

	if o.IsWriteConfigOnly() {
		return nil
	}

	var nodeConfig *configapi.NodeConfig
	var err error
	if o.IsRunFromConfig() {
		nodeConfig, err = configapilatest.ReadAndResolveNodeConfig(o.ConfigFile)
	} else {
		nodeConfig, err = o.NodeArgs.BuildSerializeableNodeConfig()
	}
	if err != nil {
		return err
	}

	validationResults := validation.ValidateNodeConfig(nodeConfig, nil)
	if len(validationResults.Warnings) != 0 {
		for _, warning := range validationResults.Warnings {
			glog.Warningf("%v", warning)
		}
	}
	if len(validationResults.Errors) != 0 {
		return kerrors.NewInvalid("NodeConfig", o.ConfigFile, validationResults.Errors)
	}

	_, kubeClientConfig, err := configapi.GetKubeClient(nodeConfig.MasterKubeConfig)
	if err != nil {
		return err
	}
	glog.Infof("Starting a node connected to %s", kubeClientConfig.Host)

	if err := StartNode(*nodeConfig); err != nil {
		return err
	}

	return nil
}

开发者ID:erinboyd，项目名称:origin，代码行数:50，代码来源:start_node.go

示例5: RunNode

// RunNode takes the options and:
// 1.  Creates certs if needed
// 2.  Reads fully specified node config OR builds a fully specified node config from the args
// 3.  Writes the fully specified node config and exits if needed
// 4.  Starts the node based on the fully specified config
func (o NodeOptions) RunNode() error {
	if !o.IsRunFromConfig() || o.IsWriteConfigOnly() {
		glog.V(2).Infof("Generating node configuration")
		if err := o.CreateNodeConfig(); err != nil {
			return err
		}
	}

	if o.IsWriteConfigOnly() {
		return nil
	}

	var nodeConfig *configapi.NodeConfig
	var err error
	if o.IsRunFromConfig() {
		nodeConfig, err = configapilatest.ReadAndResolveNodeConfig(o.ConfigFile)
	} else {
		nodeConfig, err = o.NodeArgs.BuildSerializeableNodeConfig()
	}
	if err != nil {
		return err
	}

	validationResults := validation.ValidateNodeConfig(nodeConfig, nil)
	if len(validationResults.Warnings) != 0 {
		for _, warning := range validationResults.Warnings {
			glog.Warningf("%v", warning)
		}
	}
	if len(validationResults.Errors) != 0 {
		return kerrors.NewInvalid(configapi.Kind("NodeConfig"), o.ConfigFile, validationResults.Errors)
	}

	if err := ValidateRuntime(nodeConfig, o.NodeArgs.Components); err != nil {
		return err
	}

	if err := StartNode(*nodeConfig, o.NodeArgs.Components); err != nil {
		return err
	}

	return nil
}

开发者ID:poomsujarit，项目名称:origin，代码行数:48，代码来源:start_node.go

注：本文中的github.com/openshift/origin/pkg/cmd/server/api/validation.ValidateNodeConfig函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。